Electricity. Business Energy Connections Enquiry for electricity. Send your completed application form with supporting documentation to:

Transcription

1 Electricity Thank you for considering E.ON for your electricity connection. These guidance notes will help you to complete your correctly so we can process it easily. We look forward to working with you in the future. Guidance notes Section A Your details Please complete all sections with your details as well as details of the site where the development is to take place. Please advise us of the builder/developer s details if you are applying on their behalf. Section G Protective Multiple Earthing (PME) Please complete this section if the development consists in part or wholly of buildings of metal framed construction. Section H Nature of electrical load Most enquiries are non-disturbing. If your enquiry is for the development of premises that may contain a high number of motors or large lift motors, air conditioning plants, industrial machinery and/or electrical welding equipment, the load may be disturbing and further information will need to be provided. Section B Contract details Please provide the details requested so that we can send you a quote for a supply contract before we install the meter. Section C New meter and contract Please provide details of the new meter you require as well as consumption information. Section D Usage of new/increased supply Please complete this section stating whether the application is for a firm or outline quotation and detailing your electrical load requirements. We need two copies of the Site Location and Layout Plans to a recognised scale. All intended meter positions should be clearly marked on these plans. Section E Temporary supply Please detail whether you require a temporary supply. Section F Electricity contractor It may be necessary for us to discuss the requirements with your electrical contractor. Please provide the name and contact number of the appropriate person/company. Section I Electrical generation Please indicate whether there will be any on-site generation. Section J Signature Please ensure that the form is signed and dated. Section K Additional information Further space is provided for any relevant information in support of your application ie Site Location and Layout Plans. Getting in touch To prevent your application being delayed, please ensure you have enclosed all the required information. If you require any further assistance in completing the form and/or wish to discuss your application request in more detail please contact our Business Energy Connections team using the details below Lines are open Mon to Thurs 8.30am to 5pm and Fri 8.30am to 4pm. energy.connections@eon-energy.com 1/6

2 Section A Your details Tracking system number (office use only) Address for correspondence Account no. (for existing customers) Title, initials and surname Company name Site address (where connection(s) required) Customer name Building names/plot nos Street Building name/number Town Street City Town Postcode City Postcode Telephone Telephone Fax Fax Section B Contract details Address for correspondence Title, initials and surname Telephone Company name Building name/number Fax Street Town City Postcode Company registration number 2/6

3 Section C New meter and contract Capacity kilo Volt-Amps (kva) Distribution company (Network Operator) Voltage (LV or HV) Meter target date Choice of Meter Operator (MOP) Company type Date of enquiry Distribution Project Manager, name Distribution Project Manager, contact number Section D Usage of new/increased supply What is the new/increased supply to be used for? (eg factory, supermarket, hotel, factory extension, office refurbishment, to allow the installation of additional machinery etc) Site and plans Please enclose two copies of Site Location and Layout Plans to a recognised scale. Intended meter positions should also be clearly marked on the plans. Is the enquiry for a speculative development? Yes No Has detailed planning permission been granted? Yes No Have you had an outline/budget quotation? Yes No (If yes, please include a copy of the quotation.) Requirements Firm or outline quotation: Firm Outline Connection requirements: New Increased load Decreased load Maximum power required in kva (after diversity): (Your electrician/electrical contractor can provide you with this information.) If the enquiry is for an increase in load, please state the existing load in kva: kva kva Date supply required Connection: Permanent Temporary Duration required (months) Type of supply: Commercial Industrial 1 phase 3 phase Do you require E.ON to carry out all on-site excavation? Yes No Supply number of existing supply: (Only required for increase or decrease in supply and can be found on the electricity bill/statement.) 3/6

4 Section E Temporary supply Will a temporary supply be required? (If yes, please give details and mark the required position on your plans.) Number required 1 or 3 phase Load / kva Date required Note: if the supply will power any motors (eg lifts or pumps), please specify in Section H. Section F Electricity contractor Name Section G Protective Multiple Earthing (PME) PME is normally provided for each supply, however some methods of building do not allow this means of earthing, in particular multi-occupancy steel framed buildings. In such cases alternative earthing solutions can be provided by your electrical contractor. Is your building steel framed and subdivided into units? Yes No Section H Nature of electrical load Most enquiries are non-disturbing. If the enquiry is for a building that contains a high number of motors or large motors for lifts, air conditioning plants, industrial machinery and electrical welding equipment, the load may be disturbing and further information should be detailed below. Non-disturbing Disturbing Details of disturbing loads Information is required about all motors and electrical welders to be connected to the system especially for the largest Star Delta start motor and the largest Direction On Line (DOL) motor. If this information is unknown, please refer to the manufacturer or the equipment installer. If available, please provide copies of the data sheets for any motor that will be installed. Total no. of motors Total no. of welders Details of largest motors Type of motor 1 or 3 phase Rating kwh/hp DOL/Star Delta Starting current Details of largest welders (eg air conditioner, fan, lift) 4/6

5 Section I Electrical generation Will there be any on-site electricity generation? Yes No Section J Signature Signature of applicant Position in company Print name Note: where application is made by a Limited Company or other body, the form must be signed by a Director or Manager of the Company, or by the Secretary duly authorised to sign on behalf of the Company or other body and he/she should add his/her position with the Company. Where application is made by a Partnership, the form must be signed by all the Partners, or by one Partner, for self and Partners. In order to carry out credit checks on applications made by Partners it will be necessary to provide all of the Partners names and addresses along with their dates of birth. Date Section K Additional information 5/6

6 Section K Additional information E.ON UK plc Registered office Westwood Way Westwood Business Park eonenergy.com Registered in England and Wales No /6