above 90 degree makes it easy to install and expand and maintain. Therefore it is easy to install, expand and maintain Environment:

Transcription

1 Fiber Optic Splice Closure RC-FSC120A-OS External Dimensions: 396x197x123mm Weight: 2.7kg Maximum capacity: 120cores 3 trays in, 3 trays out RC-FSC96-OS External Dimensions: 460x180x112mm Weight: 2.6kg Maximum Capacity: 96 cores RC-FSC120-QI Application: Aerial External Dimensions: (D x H): 205x438mm Weight: 2.3kg Structure: split type (quick installation type) Material: Engineering Plastics Maximum capacity: 120cores RC-FSC96B-OS Application: Aerial or Underground, Duct External Dimensions: 370x155x120mm Weight: 1.9kg Maximum Capacity: 96cores Fiber Optic Distribution Box RC-FSC144-OS External Dimensions:415x200x105mm Weight: 2.7kg Maximum Capacity: 144cores RC-FSC288-OS Application: Aerial or Underground, Duct External Dimensions: 470x230x160mm Weight: 5.2kg Maximum Capacity: 288cores RC-FSC192-OS Application: Aerial Wall Mounting External dimensions: 386x250x120mm Weight: 3.3kg Maximum capacity: 192cores RC-FSC72-OS RC-FA12/24 Frame (12, 24 fibers) Distribution frame includes metallic casing, adaptor plat, splice tray and other necessary Materials for the termination of optical fiber cables Frame has fiber splicing and distribution function Optical fiber distribution frame can be installed in the 19 inches rack Environment: Relative humidity: Below 85% (when the temperature is below 30 degrees Celsius) Main technical indexes: Insulation resistance: >=2 x 10,000m /500V DC Voltage strength: Non-puncture, no arc over under 15kV DC/min Good cold rolled steel material Weight: 3.4kg Dimensions: 485 x 300 x 52mm Slide type, easy to pull out for management Different front plates can be chosen for SC, FC, ST and LC Capacity: 1U 24 Cores, 2U 48 Cores, 3U 72 Cores and 4U 96 Cores Application: Aerial Wall Mounting External dimensions: 300x200x93mm Weight: 1.45kg Maximum capacity: 72cores Fiber optic splice closure belongs to the accommodate the optical fiber fusion splice section system.it is widely applied to the connection of the fiber.according to the structure character the fiber optic splice closure can be classified to the Horizontal and Dome type. Compliant with ROHS,ISO9000 As the materials for sealing gasket and closure are unique, our closures could be used repeatedly and low consumption of the environment and resource The fixing device for reinforced core is of high resistant to high voltage and could stand up to 15KV Unique grounding device to ensure the sealing performance, and at the same time easy and convenient for installation Be used for both ribbon and single core fibers Environment conditions Environmental temperature Optical performance:no attenuation Seal performance when the closure is pressurized up to 100KPa no air bubble after 15 minutes under water, or no change of air meter after 24 hours Re-entry performance the sealing performance could still meet the standard after three times of re-entry Insulation resistance 2 104MΩ Voltage resistance no arc-over or no puncture under 15KVDC/1min 20 RC-TB8 Terminal box(8 fibers) This is innovative, designed in up-down bisection. Its installation is quite simple. By weak two pieces of fixing nut, it succeeds in opening the housing and allows fiber cable and pigtails to pass in and out in one side, while for GP-F allows in two sides The housing of termination box is made of quality metal. The material has excellent mechanical strength. It is of nice shape and appearance with electro-static spray painting, Slide-in-lock fiber optic splice tray and its opening angle above 90 degree makes it easy to install and expand and maintain. Therefore it is easy to install, expand and maintain Environment: Relative humidity: Below 85% (when the temperature is below 30 degrees Celsius) Applications: city and country cable network, data and graph transfer system, CATV wired TV series 21

2 Fiber Optic Distribution Box RC-FB12/24 The distribution frame includes the metallic casing, adapter plate, splice tray and other necessary materials for the termination of optical fiber cables This frame has fiber splicing and distribution function. The optical fiber distribution frame can be installed in the 19 inches rack Environment: Relative humidity: below 85% (when the temperature is below 30 degrees Celsius) Main technical indexes: Insulation resistance: 2 x 10,000m /500V DC Voltage strength: non-puncture, no cover under 15kV DC/1min Applications: city and country cable network, the data and graph transfer system, the CATV wired TV series 22

3 Indoor Fiber Optic Distribution Frame (ODF Cabinet) Rancent series fiber optic distribution frame is the high density fiber optic distribution frame developed by our company.it's suitable for both single core and ribbon fiber cable, especially suitable for indoor optical terminal in optical fiber system and FTTH. Compliant with ROHS, ISO9000 The frame adopts front side cable operation, easily for wall-mounting installation, which is good view and save the in stallation space. Fiber cable inlet, fiber optic distribution adopts the fiber management structure that design is unique splice and distrib ution of fiber cable and pigtail, movable connection of pigtail and patch cord is finished in the same fiber management tray. The movable connector adopts inclined 25 degree installation structure, Which ensures the bend radius of pigtail and patch cord; and can also protect eyes from laser. Reasonable layout makes line clear and protect fiber optic cable. Environmental temperature Technical Parameters Model RC-DF01 RC-DF02 Accessories Fiber cable distribution unit Fiber cable fixing unit Fiber cable bobbin unit Fiber cable direct spliced unit Patch cord Adaptor Protective tube Size(mm) Capacity(cores) Material stainless steel stainless steel 23

4 Outdoor Fiber Optic Distribution Cabinet Outdoor optical fiber distribution cabinet is the high density fiber optic distribution frame developed by our company. It's suitable for both single core and ribbon fiber cable,especially suitable for indoor optical terminal in optical fiber system and FTTH. The body made from stainless steel material by thermal compression molding process is ageing-resistant and durable The thick and solid body with good heat-isolative performance can effectively protect condensation inside the cabinets The water-proof door with a 3-point locking mechanism protects the cabinet from dust and moisture and unauthorized entry 12-core integrated distribution and spliced module suitable for FC and SC adapter installation Optical arrangement for optical cables and optical fibers with fiber storage units Reliable cable fixing and grounding devices Good waterproof performance Environment condition Environmental temperature Relative humidity: 95%(When the temperature is below 40. Atmospheric pressure:70~106kpa. Technical parameters model Dimension(mm) Core capacity Cable Port(max) Max Cable(mm) Weight (Kg) Outdoor Optical fiber distribution cabinet Select Accessories FC Adapter, SC Adapter, Bundle pigtail, Ribbon pigtail. 24

5 Fiber Optic Distribution Frame Wall-mounting Fiber optic distribution frame wall-mounting with the structure of separately splicing and distribution, are especially suitable for indoor optical terminal in optical fiber system and FTTH. Compliant with ROHS,ISO9000 Optical distribution box is used at optical access network terminal, it acts as the optical distribution and fusion. Box body is made of stainless steel or cold rolled plate with electrostatics plastic-spray surface. It looks nice in shape and operation is convenient, anti-aging and corrosion can be assured. It is the combination of three functions: optical fusion, store and distribution. Fusion tray can be turned over, also can be pulled out to operate outside, the expansion of capacity is easy. Adapter is installed with a certain angle, maintenance is easy, transmission loss is low. It suits for common optical fiber cable, also for band optical fiber cable's fusion. Environment conditions Working Temperature: Relative Humidity: 85% (30 ). Air Pressure: KPa. Resistance to voltage between high-voltage protection ground and frame: 3kV (DC) / 1min,no puncture or arc. Insulation resistance between high-voltage protection ground and frame: 20,000M / 500V DC. Technical parameters Model Distribution Frame (wall-mounting) Dimension(mm) Core capacity Cable port Max inlet(mm) Capacity Tray(cores) Weight (kg)