All Copper Alloy Ground Connectors

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "All Copper Alloy Ground Connectors"

Transcription

1 MA6 Type ABG For cable connection parallel or at right angles to pipe or rod. Conduit MA6 Conduit Features: A high strength corrosion-resistant copper alloy ground connector connecting a ground wire either parallel or at right angles to a ground rod or pipe. A positive ground is assured by the clamping pressure that can be applied by the high strength silicon bronze U-bolt, nuts and lock washers. Type ABG connectors are suitable for direct burial. For ground pipe larger than 1 1 use Type CG Ground Connector shown on Page MA7. NEMA: FB-1 Type ABG at Right Angles Type ABG Parallel Driven (In.) Catalog Ground Ground AWG/kcmil Dimensions in Inches Number Rod Size Pipe Size Min. Max. L W U B ABG ABG / ABG or ABG or / ABG or / ABG or ABG or ABG or / ABG or 3 4 2/ ABG or ABG ABG / ABG / ABG ABG ABG / ABG / ABG ABG ABG / ABG / ABG

2 MA7 Type CG MA7 For cable connection either parallel or at right angle to pipe. A high strength corrosion-resistant copper alloy ground connector having a reversible contact plate which permits the ground wire to be connected either at right angles or parallel to a ground pipe. The fitting is designed so that the saddle can be installed before the ground connection is made. High strength silicon bronze hardware permits high clamping pressures to be applied. For ground pipe smaller than 2 use Type ABG shown on page MA6. Type CG connectors are suitable for direct burial. Fed. Spec: W-F-406E L W Ground Catalog Pipe Size AWG/kcmil Dimensions in Inches Number (Inches) Min. Max. L W U B CG CG / CG / CG CG CG / CG / CG CG CG / CG / CG CG CG CG / CG / CG CG Type CG Ground Pipe CG CG / CG / CG CG CG / CG / CG CG / CG / CG CG CG / CG / CG CG CG CG / CG CG CG

3 MA8 Type TG MA8 This ground connector is used for grounding H column fence posts. Its design eliminates the need for drilling the post.to attach, loosen the nut sufficiently to allow the end of the J bolt to slip over the flange, assemble the cable into the fitting and then tighten. I-Beam Material/Finish: The current carrying parts are of cast copper alloy. The J bolt, nut and washer are Hot Dip Galvanized steel. Type TG H Column Catalog Min. Max. Fence Post Dim. in Inches Number Solid Str. Min. Max. L W B TG / Type RG For braid or copper bar to pipe. This Ground Connector is designed to connect flat copper braid or copper bar to a pipe. A copper alloy body and silicon bronze bolt, nut and lock washers, combine strength and corrosion-resistance, insuring a positive mechanical and electrical connection. Ground Catalog Pipe Size Dimensions in Inches Number (Inches) L W U B RG-07 1 or RG RG RG RG RG RG RG Ground Pipe Braid RG RG RG Type RG Fed. Spec: W-F-406E Notes: Sizes are for braid or copper bar 1 Max. Suitable for direct burial application.

4 MA9 MA9 Type KG Two-piece design This ground connector is designed to connect a ground wire to any flat surface. Copper alloy body and silicon bronze bolt, nut and lock washer, with the Interlocking clamp, combine strength and corrosionresistance, insuring a positive ground connection. HEX-CUP construction of the fitting, simplifies installation by requiring only a single wrench for tightening. Number Min. Max. L W H B KG KG / KG-25 2/ KG KG KG Type KG Bolts furnished will fasten connector to plate up to 1 4 thick. Longer bolts will be furnished when necessary if plate thickness is specified. Contact your local representative. Type KGM One-piece design Number Min. Max. L W H B An economical ground connector for connecting a ground wire to any flat surface. Copper alloy body and silicon bronze bolt, nut and lock washer combine strength and corrosion-resistance to insure a positive ground connection. HEX-CUP construction of the fitting simplifies installation by requiring only a single wrench for tightening KGM KGM / KGM-25 2/ KGM KGM KGM Bolts furnished will fasten connector to plate up to 1 4 thick. Longer bolts will be furnished when necessary if plate thickness is specified. Contact your local representative. Type KGM

5 MA10 Type LG One bolt Type MG Two bolts MA10 For connecting two parallel cables of the same or varying sizes to any flat surface. Installation of connectors is simplified by HEX-CUP construction. s are gripped by the interlocking clamp, used throughout the line of ground devices. Copper alloy body and silicon bronze bolts, nuts and lock washers make a completely corrosion resistant fitting and permit high pressure to be applied - insuring a positive ground connection. The two Types LG and MG differ only in the number of fastening bolts as shown. Type MG W L Type LG H B C L Type MG W B Type MG & Type LG Bolts furnished will fasten connector to plate up to 1 4 thick. Longer bolts will be furnished when necessary if plate thickness is specified. Contact your local representative. Suitable for direct burial. Number Min. Max. L W H B LG LG / LG-25 2/ LG LG LG Catalog Either Side Dimensions in Inches Number Min. Max. L W H B C MG MG / MG-25 2/ MG MG MG Type MG are suitable for direct burial.

6 MA11 Type QG This Ground Connector affords a means of connecting a cable to a flat surface. The ground conductor is looped in the groove of the fitting and clamped securely by the pressure plate. The high copper content of this fitting insures high conductivity and the silicon bronze bolt, nut and lock washer complete the corrosion-resistant fitting. Number Min. Max. B L W H QG QG / QG / QG-30 1/ Type QG MA11 B H Bolts furnished will fasten connector to plate up to 1 4 thick. Longer bolts will be furnished when necessary if plate thickness is specified. Contact your local representative. Suitable for direct burial. Type VG These ground connectors are attached to a ground cable in the floor or wall base, and after the concrete is poured a 2 x 2 flat plate is left exposed flush with the surface. The connectors may be located at pre-determined locations, or if set at intervals throughout the floor or wall base, a ground pad id always readily available for grounding electrical equipment. Number Min. Max. A B C E *VG / *VG /0 4/ *VG *VG **VG / **VG /0 4/ **VG **VG *Two Tapped Holes **Four Tapped Holes Type VG UL Standard 467 Suitable for direct burial.

E-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB

E-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB Waterpipe Ground Clamps Cat. No. Ground Wire Size Water Pipe Size 2-TB 1/2 in., 3/4 in., 1 or rebar 4-10 3-TB 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, 4 2-1/2 in., 3 in. or 3-1/2 in. #2 WG 5-TB 4 in., 4-1/2

More information

PART 6 GREY SECTION SUBSTATION FITTINGS

PART 6 GREY SECTION SUBSTATION FITTINGS PART 6 GREY SECTION SUBSTATION FITTINGS 6-1 TERMINAL LUG COPPER CABLE TO SWITCHGEAR TYPE CTL19 or ATL19 Terminal lugs are cast in copper or aluminium alloy. Palms are machined on lower face. Interlocking

More information

STUD CONNECTORS DSC...STUD TO CABLE...SE-9 ADSF...STUD TO FLAT...SE-5 DST...STUD TO TUBE...SE-13 DSATL...STUD TO TUBE...SE-6

STUD CONNECTORS DSC...STUD TO CABLE...SE-9 ADSF...STUD TO FLAT...SE-5 DST...STUD TO TUBE...SE-13 DSATL...STUD TO TUBE...SE-6 CONNECTORS BOLTED/ALUMINUM ADSC... TO CABLE... -1 ADSF... TO FLAT...-5 ADST... TO TUBE...- DSATL... TO TUBE...-6 WELDMENT/ALUMINUM WSATL...WELDMENT EXPANSION, TO TUBE...-8 BOLTED/BRONZE DS... TO TWO CABLES

More information

INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED

INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING

More information

INSTALLATION OF A BAY WINDOW

INSTALLATION OF A BAY WINDOW INSTALLATION OF A BAY WINDOW Installation of a Bay Window These instructions relate to the replacement of an existing bay window or replacement of a straight window with a new bay window, in an opening

More information

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from

More information

Copper tubular lugs. Earthing line supports and accessories. C type connectors. Mechanical connectors. Cable clamps

Copper tubular lugs. Earthing line supports and accessories. C type connectors. Mechanical connectors. Cable clamps Copper tubular lugs 120 Earthing line supports and accessories 121 C type connectors 124 Mechanical connectors 125 Cable clamps 128 Earthing copper tubular lugs Tin-plated forged copper lugs Earthing connections

More information

PROPER HANGING OF FIRE SPRINKLER SYSTEMS IFSA. All rights reserved.

PROPER HANGING OF FIRE SPRINKLER SYSTEMS IFSA. All rights reserved. PROPER HANGING OF FIRE SPRINKLER SYSTEMS 2010 IFSA. All rights reserved. 1 HANGING PER NFPA 13 2 Historical developments and basic concepts Hangers Hanger installation Special listed pipe Hangers in earthquake

More information

S W E RV E RAC K. Simple Security. Simple Stability.

S W E RV E RAC K. Simple Security. Simple Stability. S W E RV E RAC K Simple Security. Simple Stability. The Swerve Rack is a proven design that provides high security and easy bike parking. The Swerve Rack uses thick pipe construction and the full radius

More information

GROUNDING & BONDING. Pool & Spa Solutions

GROUNDING & BONDING. Pool & Spa Solutions GROUNDING & BONDING Pool & Spa Solutions Relax. With BURNDY, You re Grounded. Before millions of Americans can escape the heat with a dip in a cool pool or warm up in a muscle-soothing hot tub, there s

More information

HOUSTON COMMUNITY COLLEGE HCC ALIEF CAMPUS MAIN BUILDING, FIRST, SECOND & FOURTH FLOORS RENOVATION ISSUE DATE: 10.17.12

HOUSTON COMMUNITY COLLEGE HCC ALIEF CAMPUS MAIN BUILDING, FIRST, SECOND & FOURTH FLOORS RENOVATION ISSUE DATE: 10.17.12 SECTION 27 05 26 - GROUNDING AND BONDING FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes grounding and bonding products, design requirements and installation for communications

More information

GROUND MOUNT INSTALLATION MANUAL

GROUND MOUNT INSTALLATION MANUAL GROUND MOUNT INSTALLATION MANUAL Contents DISCLAIMER 1 CHECKLIST 2 1. BUILD BASe 3 2. CONNECT SUBSTRUCTURe 3 3. PLACE RAILS 4 4. SECURE LUGS 4 5. CLAMP MODULES 5 DIAGONAL BRACES (OPTIONAL) 6 UNDER CLAMPS

More information

Panel Installation Manual. Nursery/Finishing Panels

Panel Installation Manual. Nursery/Finishing Panels Panel Installation Manual Nursery/Finishing Panels Identification of Panel Components 1A is a floor plan of the building that will serve an example for the installation of Nursery/Finisher Panels throughout

More information

QCS Section 21 Part 22 Earthing and Bonding Page 1 22. EARTHING AND BONDING...2

QCS Section 21 Part 22 Earthing and Bonding Page 1 22. EARTHING AND BONDING...2 QCS Section 21 Part 22 Earthing and Bonding Page 1 22. EARTHING AND BONDING...2 22.1 GENERAL...2 22.1.1 Scope 2 22.1.2 References 2 22.1.3 Quality Assurance 2 22.1.4 Submittals 2 22.2 PRODUCTS...2 22.2.1

More information

COUPLERS L90...ANGLE, TUBE TO TUBE...SB-6 ASTC...STRAIGHT, TUBE TO CABLE...SB-4 ASTT...STRAIGHT, TUBE TO TUBE...SB-3

COUPLERS L90...ANGLE, TUBE TO TUBE...SB-6 ASTC...STRAIGHT, TUBE TO CABLE...SB-4 ASTT...STRAIGHT, TUBE TO TUBE...SB-3 BOLTED/ALUMINUM AL...ANGLE,...- AL90...ANGLE,...-1 ASTC...STRAIGHT, TUBE TO CABLE...- ASTT...STRAIGHT,...- BOLTED/BRONZE L...ANGLE,...- L90...ANGLE,...- STC8...TUBE TO CABLE...-10 STTH...-8 WELDMENT/ALUMINUM

More information

GUARDRAIL POST STEEL

GUARDRAIL POST STEEL GUARDRAIL POST STEEL Guardrail posts meeting materials certification are evaluated and checked for: 1. Dimensional acceptance 2. Physical test results a. Chemical b. Physical 3. Galvanized or painted coating

More information

OSYSU Series Outside Screw and Yoke Valve Supervisory Switch

OSYSU Series Outside Screw and Yoke Valve Supervisory Switch Features NEMA 4X* (IP 65) and 6P (IP 67) *Enclosure is 4X. For additional corrosion protection of mounting hardware, use model OSYSU-2 CRH -40º to 140º (-40ºC to 60ºC) operating temperature range Visual

More information

TYPICAL RESIDENTIAL OVERHEAD INSTALLATION

TYPICAL RESIDENTIAL OVERHEAD INSTALLATION TYPICAL RESIDENTIAL OVERHEAD INSTALLATION A. GENERAL NOTES: Service entrance line and load conductors, conduit straps, weatherhead, lock nuts, bushings, connectors, and miscellaneous mounting hardware

More information

SECTION 23 05 29 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT

SECTION 23 05 29 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT SECTION 23 05 29 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipe hangers and supports. 2. Hanger rods. 3. Inserts. 4. Flashing. 5. Equipment

More information

CDGRD-10. Grounding. Solutions For Comm/Data Applications

CDGRD-10. Grounding. Solutions For Comm/Data Applications CDGRD-10 Grounding Solutions For Comm/Data Applications Overview & Table of Contents Cooper B-Line s Grounding products for rack & runway provide a complete solution for grounding metal supports. The offering

More information

DOING IT YOURSELF (DIY) TV CABLING

DOING IT YOURSELF (DIY) TV CABLING DOING IT YOURSELF (DIY) TV CABLING INFORMATION FOR CONSUMERS PURCHASING COMPONENTS FOR USE IN DIY INSTALLATIONS Installation Requirements and Recommendations with Specifications of Components Used (CABLES,

More information

4-Post Equipment Rack Assembly Instructions

4-Post Equipment Rack Assembly Instructions Instruction Sheet 860421239 4-Post Equipment Rack Assembly Instructions General The 4-post equipment racks are industry standard 19-inch (483mm) and 23-inch (584mm) wide racks available in 7 foot (2.1m),

More information

TRANS-05, Torque Tube Removal, Rebuilding, and Installation

TRANS-05, Torque Tube Removal, Rebuilding, and Installation TRANS-05, Torque Tube Removal, Rebuilding, and Installation Tools Metric Wrench Set Metric Socket Set Jack Stands (6 minimum) Floor Jack 8mm Cheesehead socket (also referred to as 12 point internal socket

More information

INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks

INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate

More information

Beam Clamps for Rectangular Channels and Tubes

Beam Clamps for Rectangular Channels and Tubes Beam Clamps for Rectangular Channels and Tubes NuClamp quickly and securely attaches strut channels to I-beams or similar structural members. One version clamps at a 90 Degree angle. PN NC35 allows struts

More information

TMC CableReady Connectors For Jacketed Metal Clad Cable TMC For Non-Hazardous Locations

TMC CableReady Connectors For Jacketed Metal Clad Cable TMC For Non-Hazardous Locations TMC CableReady Connectors For Jacketed Metal Clad Cable TMC For Non-Hazardous Locations CableReady connectors are designed for use with the following cables: Type MC jacketed corrugated aluminum, interlocked

More information

Guidelines for Earthquake Bracing of Residential Water Heaters

Guidelines for Earthquake Bracing of Residential Water Heaters Guidelines for Earthquake Bracing of Residential Water Heaters Department of General Services Division of the State Architect 1102 Q Street, Suite 5100 Sacramento, CA 95814 Phone: (916) 324-7099 Fax: (916)

More information

Residential Deck Safety, Construction, and Repair

Residential Deck Safety, Construction, and Repair Juneau Permit Center, 4 th Floor Marine View Center, (907)586-0770 This handout is designed to help you build your deck to comply with the 2006 International Residential Building code as modified by the

More information

C. ANSI C Electrical Analog Indicating Instruments. E. ANSI C Guide for Transformer through Fault Duration.

C. ANSI C Electrical Analog Indicating Instruments. E. ANSI C Guide for Transformer through Fault Duration. SECTION 264260 - DISTRIBUTION SWITCHBOARDS PART 1 GENERAL 1.01 SECTION INCLUDES A. Main switchboard. 1.03 RELATED SECTIONS A. Drawings and general provisions of the Contract, including General and Supplementary

More information

CP2 Buried Cable Pedestal Initial & Rehab Installation Instructions

CP2 Buried Cable Pedestal Initial & Rehab Installation Instructions Printing 3 March 2008 CP2 Buried Cable Pedestal Initial & Rehab Installation Instructions This instruction is intended for CP2 cable pedestal installations and replacements. The following tools will be

More information

I BEAM TRACK INSTALLATION

I BEAM TRACK INSTALLATION PDQ 0/700 FESTOON SYSTEM INSTALLATION AND MAINTENANCE INSTRUCTIONS INTRODUCTION The PDQ Festoon System was designed to run on one of three sizes of I-beams: S x., S8 x 8. and S x.. System trolleys must

More information

Cable Installation Accessories. Cable Hoisting and Attachment. Snap-In Hangers. SnapStak Hangers

Cable Installation Accessories. Cable Hoisting and Attachment. Snap-In Hangers. SnapStak Hangers SnapStak Hangers New design increases stack height SnapStak hangers have become the industry standard for maximizing space utilization on crowded towers and now that utility is further expanded with the

More information

F-Series Camera Mounting Accessories

F-Series Camera Mounting Accessories F-Series Camera Mounting Accessories Document Number: 427-0462-00-12 Version: 100 Issue Date: September 2010 2010. All rights reserved worldwide. FLIR Commercial Systems, Inc. 70 Castilian Drive Goleta,

More information

During severe flood events, such as those

During severe flood events, such as those Recommended Practice for Home Heating Oil Tank Flood Resistance During severe flood events, such as those occurring from Hurricane Irene and Super- Storm Sandy, many coastal and low elevation inland areas

More information

Copper tubular lugs XXX. Earthing line supports and accessories XXX. C type connectors XXX. Mechanical connectors XXX.

Copper tubular lugs XXX. Earthing line supports and accessories XXX. C type connectors XXX. Mechanical connectors XXX. Copper tubular lugs XXX Earthing line supports and accessories XXX C type connectors XXX Mechanical connectors XXX Cable clamps XXX Earthing copper tubular lugs Tin-plated forged copper lugs CDCT series:

More information

Installation Instructions

Installation Instructions Installation Instructions One-Piece Deep Wall Sleeve For Use with Packaged Terminal Units Please read these instructions completely before attempting installation. NOTE: Ensure that the unit is only installed

More information

25-kV Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp and 1250 Amp

25-kV Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp and 1250 Amp Page 1 2015 Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other Component 15 kv or 25 kv Separable Insulated Connector (elbow) Equipment Connection Power Cable Power Cable Grounded Metal

More information

Installation instruction do88 Intercooler for Volvo S40 / V50 / C30

Installation instruction do88 Intercooler for Volvo S40 / V50 / C30 Installation instruction do88 Intercooler for Volvo S40 / V50 / C30 This instruction shows how to replace the OEM intercooler with our performance intercooler. 2. 3. 1. 4. 5. Part number: ICM-170 6. At

More information

PIPE & CONDUIT CLAMPS

PIPE & CONDUIT CLAMPS PIPE & ONDUIT LMPS Power-Strut pipe, conduit and tubing clamps are formed in punch press dies in a wide selection of sizes to meet every requirement. MTERIL: Power-Strut pipe, conduit and tubing clamps

More information

I-Line. Accessories. Essential cable installation products for corrugated, smooth wall, and braided cables

I-Line. Accessories. Essential cable installation products for corrugated, smooth wall, and braided cables I-Line TM Essential cable installation products for corrugated, smooth wall, and braided cables Installation Coaxial cable installation components for corrugated, smooth wall and braided cables Proven

More information

It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool

It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend

More information

Table of contents: QR4 Manual 10-08

Table of contents: QR4 Manual 10-08 Table of contents: ITEM # Page Container Contents 2 Necessary Tools 4 General Warnings 5 Installation Instructions 7 Appendix A: Operating Instructions 14 Appendix B: Wiring Diagram 15 Appendix C: Operational

More information

Traction Tread Grating - Design Load Table of Contents & Advantages

Traction Tread Grating - Design Load Table of Contents & Advantages - Design Load Table of Contents & Advantages Design Load Tables, aluminum, stainless steel Planks - 7" width... 54 Planks - 10" width... 55 Planks - 12" width... 56 Planks - 10" width, large hole... 57

More information

CT-02 CABLE TRAY SYSTEMS

CT-02 CABLE TRAY SYSTEMS CT-02 CABLE TRAY SYSTEMS SYSTEMS THAT MAKE SENSE Introduction B-Line Systems was formed in 96 and has over 30 years experience manufacturing cable tray systems in which it has grown to become the industry

More information

Building the Basic Bottle Rocket Launch Pad

Building the Basic Bottle Rocket Launch Pad Building the Basic Bottle Rocket Launch Pad Materials: -Formica double-sink countertop cutout. This can be easily and cheaply obtained from a local company that manufactures and/or installs countertops.

More information

CAMP U S RAC K. Orderly Bike Parking

CAMP U S RAC K. Orderly Bike Parking CAMP U S RAC K Orderly Bike Parking The design of this bike rack supports the frame of the bike while keeping the fork from twisting. The result is convenient, orderly bike parking. The Campus Rack is

More information

FTC 2015-2016 DIY Mountain Build Guide

FTC 2015-2016 DIY Mountain Build Guide FTC 2015-2016 DIY Mountain Build Guide Assembly Instructions Check out the DIY2015-2016 Prints and BoM for individual part details. Release 1.0 9/10/15 Page 1 This guide and Bill of Materials are for constructing

More information

Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.

Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev. Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical

More information

Standard Pole Mount Parabolic Antenna Mounting Instructions 3 ft. (90cm) & 4 ft. (120cm)

Standard Pole Mount Parabolic Antenna Mounting Instructions 3 ft. (90cm) & 4 ft. (120cm) Standard Pole Mount Parabolic Antenna Mounting Instructions 3 ft. (90cm) & 4 ft. (120cm) 495R Billerica Ave. North Billerica, MA 01862 USA Tel (978)459-8800 fax (978)459-3310 / 8814 Email: sales@radiowaves.com

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier

More information

Arecont Vision H.264 Color or Day/Night SurroundVideo Series Installation Manual

Arecont Vision H.264 Color or Day/Night SurroundVideo Series Installation Manual 0 P a g e H.264 Color or Day/Night SurroundVideo Installation Manual Inside the box: A. Arecont Vision SurroundVideo camera B. Mounting template C. RJ45 female to female coupler D. Hex key E. Security

More information

FASTENERS. Steel Cotter Pins. Spring Roll Pins

FASTENERS. Steel Cotter Pins. Spring Roll Pins Steel Cotter Pins Precision parallel shanks Offset ends for easy locking Finest high strength steel Zinc plated to resist rust and corrosion Size 1/32 3/64 1/16 5/64 3/32 7/64 1/8 1/2 0410201 0410401 0410501

More information

STERNMOUNT MARINE TOWER KIT OWNER S MANUAL

STERNMOUNT MARINE TOWER KIT OWNER S MANUAL STERNMOUNT MARINE TOWER KIT OWNER S MANUAL VERSION 1.5 Made in the USA by: Southwest Windpower 1801 W. Route 66 Flagstaff, AZ 86001 (520) 779-9463 AIR Marine is a trademark of Southwest Windpower Inc.

More information

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family

More information

BZP Tensile Class 8 Stainless Steel A2 Height (m) in mm A/F (sw) in mm Art. No.

BZP Tensile Class 8 Stainless Steel A2 Height (m) in mm A/F (sw) in mm Art. No. Hexagon Nuts Full nut with metric coarse thread. Available in the following materials: Steel, Bright Zinc Plated. Din 934-8 Steel, Self Colour. Din 934-10. Stainless Steel; A2-70. Din 934. Also available

More information

Electrical Accessories

Electrical Accessories Electrical ccessories Electrical ccessories complete system of top quality, time saving products, designed for surface metal raceways, lighting and cable supports. Innovative designs offer many installation

More information

TYPICAL WIRING OF METER SOCKET FOR SINGLE PHASE, THREE WIRE OVERHEAD SERVICE

TYPICAL WIRING OF METER SOCKET FOR SINGLE PHASE, THREE WIRE OVERHEAD SERVICE TYPICAL WIRING OF METER SOCKET FOR SINGLE PHASE, THREE WIRE OVERHEAD SERVICE A. GENERAL NOTES: Service entrance line and load conductors, conduit straps, weatherhead, lock nuts, bushings, connectors, and

More information

Check for deteriorated, shifting or missing tie-down pads. Replace if needed.

Check for deteriorated, shifting or missing tie-down pads. Replace if needed. C C 0 5 C H A S S I S F R A M E Chassis Frame Overview The Blue Bird Vision s chassis frame consists of two main C-channel rails which run the entire length of the bus, and several different kinds of cross

More information

Chapter 5 FLOOR LOADING AND WEIGHTS

Chapter 5 FLOOR LOADING AND WEIGHTS Chapter 5 FLOOR LOADING AND WEIGHTS Section 1.0 Floor Loading Section 2.0 Seismic Data The CT system has a total floor load of approximately 6660 lbs (3021 kg). About 5050 lbs (2291 kg), including patient

More information

Salter Industries, Spiral Stair

Salter Industries, Spiral Stair Salter Industries, Spiral Stair Adjustable Stair Installation Instructions TOOLS NEEDED: 1. Electric drill with hex chuck and Phillips bit 2. Drill bits 1/8", 1/4", 3/16", 3/8" 3. Socket Set 4. Tape Measure

More information

Vertical Break Parallel (VBP) / Vertical Break Slant (VBS)

Vertical Break Parallel (VBP) / Vertical Break Slant (VBS) August, 2009 Vertical Break Parallel (VBP) / Vertical Break Slant (VBS) Type VBPA (Aluminum) / Type VBPC (Copper) Type VBSA (Aluminum) / Type VBSC (Copper) PASCOR Air Break Switch Technology PASCOR offers

More information

INSTALLATION INSTRUCTIONS VERTICAL MURPHY BEDS

INSTALLATION INSTRUCTIONS VERTICAL MURPHY BEDS Version NCSL2.13 INSTALLATION INSTRUCTIONS VERTICAL MURPHY BEDS These instructions do not apply to Horizontal Murphy beds BEFORE YOU BEGIN, PLEASE TAKE A FEW MOMENTS TO FAMILIARIZE YOURSELF WITH ALL OF

More information

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application 33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection

More information

SECTION METAL STAIRS, LADDERS, AND WALKWAYS

SECTION METAL STAIRS, LADDERS, AND WALKWAYS SECTION 05510 METAL STAIRS, LADDERS, AND WALKWAYS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Technical requirements for metal stairs, ladder, and walkways. 1.2 REFERENCES A. General: References to

More information

THIS PAGE INTENTIONALLY LEFT BLANK

THIS PAGE INTENTIONALLY LEFT BLANK (713) 690-0040 THIS PAGE INTENTIONALLY LEFT BLANK ORIFICE FLANGES In Carbon, Alloy and Stainless 300lb. through 2500 lb. or Ring Joint ORIFICE FLANGES are widely used in conjunction with orifice meters

More information

Cable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:

Cable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows: QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which

More information

Lathe Milling Attachment

Lathe Milling Attachment Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,

More information

Installation Manual. SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks)

Installation Manual. SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks) Installation Manual SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks) Welcome to the world of TracRac! We re delighted that you have chosen TracRac, the ultimate sliding truck rack system.

More information

BAND HEATERS. component parts

BAND HEATERS. component parts BAND HEATERS BAND HEATERS OVERVIEW WATTCO band heaters are the ideal solution for high watt densities and high operating temperature applications, especially for the plastics industry. The various types

More information

EZ-48-3AB-125-35 Weather Station Mounting Tripod and Mast

EZ-48-3AB-125-35 Weather Station Mounting Tripod and Mast EZ-48-3AB-125-35 Weather Station Mounting Tripod and Mast EZ-125-35M 35 Mast Extension (Optional) EZ-125-SK Stake Kit (Optional) EZ-46-3 Tar Pad Kit (Optional) EZ-GWA Guy Wire Kit (Optional) Ambient Weather

More information

GEH6290. Mechanism Circuit Breaker. Handle Operating Mechanism Cat. No. Type NEMA 1, 3R, 12, 13 NEMA 4/4X Cat. No. Cat. No. Series Instruction

GEH6290. Mechanism Circuit Breaker. Handle Operating Mechanism Cat. No. Type NEMA 1, 3R, 12, 13 NEMA 4/4X Cat. No. Cat. No. Series Instruction GEH6290 g Cable Operator Mechanisms for E150, SE150, SF250, and SG600 Spectra RMS Circuit Breakers Type SCH1/1X, SCH2/2X Flange-Mounted Handle Assemblies, Cable Series SC3L SC10L and Type SC0M1A, SCOM1EF,

More information

MAST ARMS & POLES. Ornamental Pole Top & Bases

MAST ARMS & POLES. Ornamental Pole Top & Bases Ornamental Pole Top & Bases Pelco s decorative pole top and bases help make the traffic signal aesthetically pleasing to the eye. Available for various pole diameters and multiple finish options. Ornamental

More information

RZ Guardrail System Installation Manual

RZ Guardrail System Installation Manual TM RZ Guardrail System Installation Manual RZ Guardrail System Compliance is based on OSHA standards: (Standards - 29 CFR) 1910.23 (e) and (Standards - 29 CFR) 1926.502 (b) Failure to read, understand

More information

FULL FRAME ANCHORING SYSTEM USER MANUAL

FULL FRAME ANCHORING SYSTEM USER MANUAL FULL FRAME ANCHORING SYSTEM USER MANUAL February 2006 CONTENT Introduction 1 Setting up the Full Frame Anchoring System 4 Anchoring procedures using the: - Box Frame and C Section Adapter - Leaf Spring

More information

Solutions for Storage Tanks

Solutions for Storage Tanks www.tankgaugingsys.com Solutions for Storage Tanks 5020 Top Mounted Sour Service Mechanical Level Gauge TGS 020 1.) POINT SWITCH CSA Class 1, Div.1 Magnetically Activated Proximity Switches for high/low

More information

Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points

Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection

More information

VIBRATION AND SHOCK MOUNTS

VIBRATION AND SHOCK MOUNTS VIBRATION AND SHOCK MOUNTS ACEMOUNT SERIES 00 SPRING ISOLATORS CATALOG NO. 8A-034-H Type "02" Type "03" Superior Isolation Efficiency: Series "00" spring isolators consist of cast iron housing and " deflection

More information

The Manitoba Water Services Board SECTION 027110 Standard Construction Specifications September 2013 Page 1 of 12

The Manitoba Water Services Board SECTION 027110 Standard Construction Specifications September 2013 Page 1 of 12 September 2013 Page 1 of 12 Part 1 General 1.1 DESCRIPTION OF WORK.1 The work shall consist of the supply and construction of a chain link fence, barb wire fences or mesh fences as shown on the Plans or

More information

James M. Pleasants Company

James M. Pleasants Company James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:

More information

These specifications shall apply to all high strength bolts and anchor bolts.

These specifications shall apply to all high strength bolts and anchor bolts. BOLTS (New Section) 972 972.1 REQUIREMENTS These specifications shall apply to all high strength bolts and anchor bolts. 972.2 SPECIFIC REQUIREMENTS A. General: All bolts, nuts, and washers shall have

More information

Installation information. METTLER TOLEDO MultiRange DW150 / DW150T wall scale

Installation information. METTLER TOLEDO MultiRange DW150 / DW150T wall scale Installation information METTLER TOLEDO MultiRange DW150 / DW150T wall scale DW150 / DW150T wall scale Contents Contents Page 1. Installation... 2 1.1 Preparatory work... 2 1.2 Installing the wall plates

More information

SECTION 02832 CHAIN LINK FENCE AND GATES

SECTION 02832 CHAIN LINK FENCE AND GATES SECTION 02832 CHAIN LINK FENCE AND GATES PART 1 GENERAL 1.01 SECTION INCLUDES A. Fabrication, furnishing and installation of chain link fence, chain link gates, and extension brackets with barbed wire.

More information

CABLEVIEW RAILING INSTRUCTIONS

CABLEVIEW RAILING INSTRUCTIONS CUSTOMER SERVICE CONTACT INFO Phone: 888-686-7245(RAIL) Fax: 888-686-7245 (RAIL) Email: sales@stainlesscablerailing.com Website: www.stainlesscablerailing.com Address: 3315 NE 112 th Ave #72/73, Vancouver,

More information

BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS

BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE

More information

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2

More information

Stainless Steel Cable Assemblies to Enhance Any Railing and Any View!

Stainless Steel Cable Assemblies to Enhance Any Railing and Any View! 2014 Feeney (9/14) King Architectural Metals Stainless Steel Cable Assemblies to Enhance Any Railing and Any View! Standard Cable Assemblies Easy-to-install, prefabricated cable assemblies are an attractive,

More information

Cat. No. Finishes & Materials. Standard Finish: Electrogalvanized. Change suffix to SS6(C).

Cat. No. Finishes & Materials. Standard Finish: Electrogalvanized. Change suffix to SS6(C). Superstrut Support Systems 1-5/8 in. x 1-5/8 in. Channel and Hardware Superstrut 1-5/8 in. x 1-5/8 in. - 12 Gauge Channel Type A Solid Base Punched Description Solid base -P Punched -HS Half slots Half

More information

E.1.12: GROUNDING SYSTEM

E.1.12: GROUNDING SYSTEM E1-GRD-1/5 E.1.12: GROUNDING SYSTEM B.1 Technical Characteristics and Requirements B.1.1 Grounding Design Criteria a. Fault duration, sec 1 b. Total fault level (line to ground), ka 20 c. Grounding connection

More information

1. Lay out 2 pieces of 7/8" tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1.

1. Lay out 2 pieces of 7/8 tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1. MINI BIKE PLANS Page 1 INTRODUCTION Before starting to build your Mini-Bike, be sure that you have all the parts shown on the material list. You will note that tubing has been used in the construction.

More information

SECTION 15140 - PIPE HANGERS AND SUPPORTS

SECTION 15140 - PIPE HANGERS AND SUPPORTS Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the

More information

5.3. Overview. Magnet wire termination. The solution from Thomas & Betts: Dragon Tooth, the insulation piercing connector

5.3. Overview. Magnet wire termination. The solution from Thomas & Betts: Dragon Tooth, the insulation piercing connector 5.3 Overview Magnet wire termination The tough, high temperature insulation on magnet wire used by electrical motor and transformer manufacturers creates problems in splicing and terminating. The durability

More information

TS 813 GROUNDING AND BONDING TTD 813.001 TRAFFIC SIGNAL INSTALLATION AND CONTROLLER CABINET GROUNDING SYSTEM TTD 813.005 CONTROLLER CABINET GROUNDING

TS 813 GROUNDING AND BONDING TTD 813.001 TRAFFIC SIGNAL INSTALLATION AND CONTROLLER CABINET GROUNDING SYSTEM TTD 813.005 CONTROLLER CABINET GROUNDING TORONTO TRANSPORTATION January 2012 TS 813 GROUNDING AND BONDING TABLE OF CONTENTS 1. DRAWINGS TTD 813.001 TRAFFIC SIGNAL INSTALLATION AND CONTROLLER CABINET GROUNDING SYSTEM TTD 813.005 CONTROLLER CABINET

More information

NORTH ORANGE COUNTY COMMUNITY COLLEGE DISTRICT SECTION 27 05 26 GROUNDING AND BONDING FOR COMMUNICATION SYSTEMS

NORTH ORANGE COUNTY COMMUNITY COLLEGE DISTRICT SECTION 27 05 26 GROUNDING AND BONDING FOR COMMUNICATION SYSTEMS SECTION GROUNDING AND BONDING FOR COMMUNICATION SYSTEMS RELATED SECTIONS: Section 27 00 00 General Requirements Section 27 02 00 Communication General Requirements Section 27 05 28 Pathways for Communications

More information

Assembly Instructions for Model: VMSA

Assembly Instructions for Model: VMSA Assembly Instructions for Model: VMSA Thank you for choosing a Sanus Systems Vision Mount wall mount. The VMSA is designed to mount up to 50 [1270 mm] Flat panel televisions weighing up to 150 lbs. [68.2

More information

UNIT SHELF TYPE "C" SHELVING SYSTEM UNIT SHELF Glass Shelf Installation

UNIT SHELF TYPE C SHELVING SYSTEM UNIT SHELF Glass Shelf Installation 499 TYPE "C" XL-US02C Glass Shelf Installation * Insert clamp fasteners before mounting leveling legs. Glass Thickness 8 or 10mm Overall Height Max. 2600mm (102-3/8") Glass Width Max. 1200mm (47-1/4")

More information

Basic, Slim & Slim Square Water heater

Basic, Slim & Slim Square Water heater Basic, Slim & Slim Square Water heater Installation and Operating Instructions IT-61019 S Agata Feltria (PU) Italy Phone 390541848030 Fax 390541848563 info@indelmarine.com www.isotherm.com Indel Marine

More information

LOW VOLTAGE FRONT ACCESSIBLE MAIN SWITCHBOARD

LOW VOLTAGE FRONT ACCESSIBLE MAIN SWITCHBOARD SECTION 16323 LOW VOLTAGE FRONT ACCESSIBLE MAIN SWITCHBOARD PART 1 - GENERAL 1.01 General: Provide low voltage main switchboard, complete, as indicated, specified and required per Contract Documents. 1.02

More information

Single Solid Square Hub Power Driven Anchor

Single Solid Square Hub Power Driven Anchor EA1 Single Solid Square Hub Power Driven Anchor Installation is performed using a power digger. An anchor wrench fits over the anchor hub and a torque measurement device is required to determine proper

More information

Gatorshield Steel Tubing

Gatorshield Steel Tubing steel tubing Gatorshield Steel Tubing ROUND STEEL TUBING Catalog # Size Gauge Bundle Qty. Price/Foot Price/Piece 014-108-288 1 x 24 18 127 $1.05 $25.20 014-104-288 1 x 24 14 127 $1.47 $35.28 014-104-276

More information

Electrical Service Guidelines

Electrical Service Guidelines Electrical Service Guidelines Middle Tennessee Electric Membership Corporation Revised: May 23, 2013 MTEMC's Electrical Guidelines TABLE OF CONTENTS Right-of-Way Clearance Guide 3 MTEMC Requirements 4

More information