Embedded Computing. Now easier than ever. Embedded Building Blocks * An Intel Initiative

Transcription

1 Embedded Computing. Now easier than ever. Embedded Building Blocks * An Intel Initiative

2 Embedded Building Blocks. A unique, new kit for Embedded Computing. Everything Made in Germany Rapid, flexible service is assured with design, production, logistics and support all in one time zone, one currency and one language. All executed in superior Made in Germany quality. A new Intel initiative for Embedded applications You need systems with exceptional requirements such as... Available unaltered for 5 years Protection levels (e.g., IP54) Special I/O ports Scalable performance in an identical system design No turning parts (such as ventilators) Top performance in the smallest spaces... and are looking for suitable products for it or planning to realise your own solutions? In order to support you at this Intel has launched the Embedded Building Blocks initiative. Its objective is to offer you the opportunity to enter the embedded computing market by providing standardized modules, the Embedded Building Blocks. Intel has brought together the prestigious companies TQ-Group, congatec and apranorm to realize the supply of top-of-theline, variable and cost-efficient building blocks. No extra design required, all parts are already in place The Embedded Building Blocks concept is as simple as it its brilliant: scalable platforms consisting of COM Express modules, standardized baseboards and mitx cases, all shipped with matching accessories, enable rapid, cost-efficient production. Embedded building blocks can thus eliminate time-consuming product development. Extra designs or even new top-tobottom designs are not needed as all parts are already in place. Key features of the embedded building blocks Scalable - Intel Atom up to Intel Core i7 Low power requirement with Intel CPUs Mini ITX form factor Long-term availability Mostly passive cooling - Scalable cooling solutions - No ventilators Flexible with PCI / PCIe riser cards - Extremely variable with virtually unlimited connection combinations Extensible with - I/O extension interface - Mini PCIe socket Industry-specific interfaces - e.g., RS-232, LVDS, etc. External interfaces on one side Embedded features - Watchdog, CMOS Backup, Customer- Specific Boot Logo, Customized BIOS Setup, Power Failure Management, etc. Cable-free system design available Flash-only versions Support of existing technology High longevity Maximum system stability Serving many applications with just a few modules Standardized embedded building blocks give you the opportunity to realise compact, robust, ventilator-free industrial computers meeting all kinds of different requirements. A few examples are listed below: Digital security and monitoring Digital signage Gaming Industrial automation and controls In-vehicle infotainment Medical technology Military / Aerospace Government / School / Training Retail (POS / Kiosk / ATM) Transportation

3 All Parts Are Already in Place. Fixed Modules Means No Need for New Development. Embedded building blocks in 4 steps 1. Choose from a wide variety of baseboard and COM Express module kits. (Intel Atom up to Intel Core i7) 2. Extend individually with risers, I/O cards, cooling kits, memory, etc. 3. Install the kit into either an appropriate standard case or into the Mini ITX case specially developed for the embedded building blocks. 4. Take note of technical and specific customer requirements. Baseboard with integrated COM Express module: variably extensible with PCI and PCIe riser cards Embedded building blocks congatec COM Express module TQ-Group Baseboard apra-norm Case Software and certifications Easily upgradeable Intel Atom, Pentium M, Core TM Duo, Core TM 2 Duo, Intel Core TM i7 mitx form factor Industry-specific interfaces Available long-term Developed for certified COM Express modules that are exchangeable PCI / PCIe riser cards Wide variety of extensions Almost all cases with a mini ITX form factor, as well as the one specially developed by apra-norm, will fit Also available in low-profile and extended formats Also available IP54-compliant on 5 sides Tech. specifications Compatible with current standard and embedded operating systems Examples Integration Transportation Medical Robotics Industry ATMs Testing sites Digital signage, etc.

4 Module, Baseboard and Case in One Kit. Available Quickly. Available Long-Term. The baseboard COM Express kit: highly flexible and scalable Scalable performance with diverse certified COM Express modules - Scalable processing power from Intel Atom up to CoreTM i7 in an identical system design - Long-term availability of baseboard and modules - No need for constant new design testing Mini ITX form factor (170 x 170 mm) - Also available at 170 x 137 mm Easy installation - All interfaces on one side Flexible riser interface with PCI and PCIe support Additional I/O extension interface provided ATX power connector Baseboard components and interfaces (top) Ventilator Buzzer Battery 1 x USB x USB 2.0 DVI-I RS-232 PWR & RST 2 x USB x Gigabit Ethernet Baseboard components and interfaces (bottom) LVDS (Single/Dual 18/24) CompactFlash (IDE flash card) Power, ATX, 20-pin SATA System connector CFast memory COM Express connectors Riser interface (up to 2 x PCIe x1, 4x PCI) Mini PCIe LEDs Display control (USB 2.0, COM, 5V & 12V backlight) Made for scalable systems. The Embedded PC case The new Embedded PC case by apranorm has been specially developed for scalable platforms. Suitable for all kinds of applications, including rugged industrial environments, control cabinets and direct deployment on machinery, but also for exterior applications, with 5-side IP-compliant protection available where needed. SATA HDD on-board connector Embedded PC case Flexible PCI/PCIe configurations I/O extension interface (USB 2.0, 1 x PCIe x1, HDA, SDVO, I2C, 3V3 & 5V & 12V) I/O window A low-profile and an extended version will also be available. A direct connection of the case to the cooling elements on the board is provided, and additional heat sinks (installed in the lid) can be added to dissipate 15 W or more of waste heat. 204 mm PCI/PCIe card within the I/O window PCI/PCIe card connected to the baseboard Ruggedized Embedded PC case Cost-efficient design Scalable (different formats) EMC-compliant basic construction Machined aluminum front frame Optional IP54-level protection 203 mm 57 mm 2 PCI/PCIe cards connected to the baseboard

5 Competent. Reliable. Innovative. Superior Quality from Experienced Specialists. COM Express modules by congatec congatec is an innovative, experienced manufacturer of Qseven, COM Express, XTX and ETX embedded computer boards. The development team has been specializing in embedded computer modules ever since the concept first emerged; it has thus acquired a vast amount of development expertise in the rapidly growing embedded computing segment. The company, located in Deggendorf, develops and sells industrial computer modules in standard form factors. Because congatec s products are not geared toward specific industries, they can be used in all kinds of applications in a variety of industrial sectors. The baseboard by TQ Group The TQ group, a leading technology services provider, offers a comprehensive range of services in all things electronics. Its offering ranges from the design stage and development through to mass production. Based on designs with highly demanding technology, TQ produces and sells highly integrated embedded systems for major industrial enterprises and for manufacturers of standard products such as computer modules and industrial PCs. All TQ products are suitable for industry and are made in Germany. The highly flexible baseboard has been specially developed for the embedded building blocks. Case by apra-norm Elektromechanik Using state-of-the-art technology, apranorm makes the best enclosures for valuable electronics in metal, aluminum and plastic, ranging from miniature housings to cabinets, in production runs from 1 to 100,000. apra-norm has the right manufacturing technology for any production run. The synergies in metal and plastic production found within the apra Group gives apra-norm the ability to realize even the most unusual of enclosure solutions. Designs can be standard, modified standard, or custom; the material can be sheet steel, stainless steel, aluminum or plastic. It s all possible. The Embedded PC case has been specially designed for scalable platforms In the context of its embedded building blocks initiative, Intel has found strong manufacturing partners in the companies TQ, congatec und apra-norm, companies that can, based on their many years of experience in the areas of embedded computing, professional realization of systems fit for industry, and optimized case integration, deliver excellent components for the construction of Embedded PCs. The modules developed under this initiative are customdesigned for each other in a way that makes the creation of embedded systems based on Intel technology extremely easy, flexible and cost-efficient. Intel believes it this should make it possible to make customized systems responding to the specific requirements of customers in short timeframes, even in small and medium quantities. This represents an enormous potential market. Martin Engelhardt Strategic Sales Development Manager at Intel

6 Embedded Building Blocks. For More Information, See Below. Learn more about embedded building blocks at: Your supplier of embedded building blocks: Microtronica - A DIVISION OF ARROW Max-Planck-Str Dreieich, Germany Tel.: , Intel Corporation. All rights reserved. Intel, the Intel logo, Intel Core, Core Inside, Intel Inside, Pentium, Pentium Inside, Intel Atom and Intel Atom Inside are trademarks of Intel Corporation in the U.S. and other countries. Other names and brands may be claimed as the property of others. * Intel does not produce, offer or sell the embedded building block products. This is happening by Apra, Congatec and TQ. Intel is neither responsible for any technical and or product features mentioned nor the availability of these products.