Non-extensible circuit breakers
|
|
- Dortha Simon
- 7 years ago
- Views:
Transcription
1 Specification Non-extensile circuit reakers 200A 0 CN2-T1 Indoor / outdoor Normal rated current 200A 12kV 16kA 3 seconds 75kV BIL 13.8kV 21kA 3 seconds 95kV BIL O O Cale earth switch 16kA 3 seconds Cale earth switch 21kA 3 seconds O O Transformer earth switch 3.15kA 3 seconds Mechanism Protection & control - circuit reaker CT s dual ratio - 100/50/5A class X CT s ratio - 200/1A class X Overcurrent & earth fault CT operated trip coils Time fuse Link O IDMT overcurrent & earth fault relay - VIP V-250V shunt trip coil Circuit reaker auxiliary switch 1NO 2NC Mechanical ON/OFF Mechanical EARTH/MAIN Neon indication ( kV) O O Auxiliary switch contacts 1NO 2NC Integral cale test facility Operating handle Transformer earth switch 3.15kA 3 seconds Cale (see availale cale kit accessories) Bottom entry up 300mm 2 1 x 3c Bottom entry up 630mm 2 3 x 1c Key: Standard feature O Optional feature CN2-T6 19
2 Non-extensile circuit reakers 200A 0 CN2-T1 CN2-T6 Kit no. Cale kits Tee-off cale ox v v RMR-F47 Gland plate 1 x 3C O O RMR-A48 Gland plate 3 x 1C O O RMR-A49 Angled gland plates (RMR) O O RMR-A50 Blank Blank aluminium gland plate O O RMR-A52 Brass wiping gland 1 x 3C O O RMR-A10 Brass wiping gland 3 x 1C O O RMR-A11 Tuular gland 1 x 3C O O RMR-A12 Tuular gland 3 x 1C O O RMR-A13 CES5 gland plate 1 x 3C O O RMR-A132 Installation items Set of padlocks - 6 no O O RMR-A18/6 Anti-vandal fixings, including tool O O RMR-A19 Foundation olts (not required for transformer mounting) O O RMR-A22 Multicore pilot glands O O RMR-A16 Time limit fuses (set of 2 - specify rating as tale page 113) O RMR-A17 Operational items Operating handle RMR-A23 Neon indication ( kV) v v RMR-F108 Neon lamp test unit (including lamp) O O RMR-A24 Neon lamp O O RMR-A81 VAP 6 test unit for VIP 300 O RMR-A202 Mechanical interlocks Key free, earth on v v RMR-F85 Key free, unit off v v RMR-F86 Transformer earth switch, key free, earth on v v RMR-F110 N. B. specify lock symol at time of ordering (3 digits max) not availale with motor mechanisms Order codes 12kV, 16kA, 75kV BIL, 0.35G CN2-T1/16 CN2-T6/ kV, 21kA, 95kV BIL, 0.8G CN2-T1/21 CN2-T6/21 General arrangement drawing - transformer mounted RMINST-04 Page 70 RMINST-04 Page 70 General arrangement drawing - freestanding RMINST-09 Page 111 RMINST-09 Page 111 Schematic diagram RMSCH-26 Page 100 RMSCH-11 Page 90 Key: Standard feature v Factory fitted accessory O Loose accessory, assemled on site 20
3 Non-extensile circuit reaker 200A 0 CN2-T1 DE60250 Transformer protection up to 3.5MVA Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC and BS142 Protection CT s - 200/1A class X Setting range: v Overcurrent: A v Earth fault: 2A-160A Shunt trip coil, 20V DC-250V AC Transformer ratings See tale - page 113 Transformer mounted installation drawing ref: RMINST-04 Installation drawing for freestanding unit with tee-off cale ox ref: RMINST-09 Schematic drawing ref: RMSCH-26 Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Tee-off earth switch, 3.15kA 3s Cale earth switch, 16/21kA 3s Mechanical tripped on fault indicator CB auxiliary contacts 1NO 2 NC Integral cale test facilities Cale Tee-off cale ox See page 20 for details CN2-T1/16 CN2-T1/21 16kA, 12kV, 75kV BIL 21
4 Non-extensile circuit reaker 200A 0 CN2-T6 DE60192 Transformer protection up to 1.5MVA Overcurrent and earth fault protection using CT operated trip coils with provision for time fuse links. Protection CT s - 100/50/5A class X Shunt trip coil, 20V DC-250V AC Transformer ratings See tale - page 113 Transformer mounted installation drawing ref: RMINST-04 Installation drawing for freestanding unit with tee-off cale ox ref: RMINST-09 Schematic drawing ref: RMSCH-11 Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Transformer earth switch, 3.15kA 3s Cale earth switch, 16/21kA 3s Mechanical tripped on fault indicator CB auxiliary contacts 1NO 2 NC Integral cale test facilities Cale Tee-off cale ox See page 20 for details CN2-T6/16 CN2-T6/21 16kA, 12kV, 75kV BIL 22
5 Specification Non-extensile switch 630A 0 SN6-S1 Indoor / outdoor Normal rated current 630A 13.8kV 21kA 3 seconds 95kV BIL Cale earth switch 21kA 3 seconds Transformer earth switch 3.15kA 3 seconds Mechanism Provision for actuator 24V DC Actuator 24V DC O Mechanical ON/OFF Mechanical EARTH/MAIN Neon indication ( kV) O O Auxiliary switch contacts 1NO 2NC Phase and earth fault detection CT s for Easergy 200E O Provision for EFPI O O Integral cale test facility Operating handle Transformer earth switch 3.15kA 3 seconds Cale (see availale cale kit accessories) Bottom entry up 300mm 2 1 x 3c Bottom entry up 630mm 2 3 x 1c Key: Standard feature O Optional feature SN6-S2 23
6 Non-extensile switch 630A 0 SN6-S1 SN6-S2 Kit no. Cale kits Tee-off cale ox v v RMR-F47 Gland plate 1 x 3C O O RMR-A48 Gland plate 3 x 1C O O RMR-A49 Angled gland plates (RMR) O O RMR-A50 Blank aluminium gland plate O O RMR-A52 Brass wiping gland 1 x 3C O O RMR-A10 Brass wiping gland 3 x 1C O O RMR-A11 Tuular gland 1 x 3C O O RMR-A12 Tuular gland 3 x 1C O O RMR-A13 CES5 gland plate 1 x 3C O O RMR-A132 Installation items Set of padlocks - 6 no O O RMR-A18/6 Anti-vandal fixings, including tool O O RMR-A19 Foundation olts (not required for transformer mounting) O O RMR-A22 Multicore pilot glands O O RMR-A16 Operational items Operating handle RMR-A23 Neon indication ( kV) v v RMR-F108 Neon lamp test unit (including lamp) O O RMR-A24 Neon lamp O O RMR-A81 Actuator 24V DC v RMR-F67 Mechanical interlocks Key free, earth on v RMR-F85 Key free, unit off v RMR-F86 Transformer earth switch, key free, earth on v v RMR-F110 N. B. specify lock symol at time of ordering (3 digits max) not availale with motor mechanisms Order codes 13.8kV, 21kA, 95kV BIL, 0.8G SN6-S1/21 SN6-S2/21 General arrangement drawing - transformer mounted RMINST-04 Page 69 RMINST-04 Page 69 General arrangement drawing - freestanding RMINST-09 Page 111 RMINST-09 Page 111 Schematic diagram N/A RMSCH-28 Page 101 Key: Standard feature v Factory fitted accessory O Loose accessory, assemled on site 24
7 Non-extensile switch 630A 0 SN6-S1 DE60193 Switch disconnector Non-automatic Installation drawing ref: RMINST-04 Installation drawing for freestanding unit with tee-off cale ox ref: RMINST-09 Schematic drawing ref: N/A Busars 630A Short time withstand 21kA 3s Normal current rating 630A Normal rated voltage 13.8kV Normal rated BIL 95kV Transformer earth switch, 3.15kA 3s Cale earth switch, 21kA 3s Integral cale test facilities Cale Tee-off cale ox Neon indication See page 24 for details SN6-S1/21 25
8 Non-extensile switch 630A 0 SN6-S2 DE60194 Switch disconnector Non-automatic Installation drawing ref: RMINST-04 Installation drawing for freestanding unit with tee-off cale ox ref: RMINST-09 Schematic drawing ref: RMSCH-28 Busars 630A Short time withstand 21kA 3s Normal current rating 630A Normal rated voltage 13.8kV Normal rated BIL 95kV Provision for actuator, 24V DC Transformer earth switch, 3.15kA 3s Cale earth switch, 21kA 3s Auxiliary contacts 1NO 2NC Earth selected auxiliary contact 1NO Integral cale test facilities Cale Tee-off cale ox Actuator, 24V DC Neon indication See page 24 for details SN6-S2/21 26
9 Specification Non-extensile metering unit 200A 0 MU2-M1 MU2-M2 MU2-M3 Indoor / outdoor Normal rated current 200A 12kV 16kA 1 second 75kV BIL Metering* CT s -50/25/5A 0.5s 7.5VA CT s -100/50/5A 0.5s 10VA CT s -200/100/5A 0.5s 10VA VT s -11kV/110V VA *CT s - 2 phases (R & B), VT s phase to phase. 6.6kV VT s are availale - contact Merlin Gerin Cale (see availale cale kit accessories) Bottom entry up 300mm 2 1 x 3c O O O Bottom entry up 630mm 2 3 x 1c O O O Key: Standard feature O Optional feature 27
10 Non-extensile metering unit 200A 0 MU2-M1 MU2-M2 MU2-M3 Kit no. Cale kits Tee-off cale ox v v v RMR-F47 Gland plate 1 x 3C O O O RMR-A48 Gland plate 3 x 1C O O O RMR-A49 Angled gland plates (RMU) O O O RMR-A51 Blank Blank aluminium gland plate O O O RMR-A52 Brass wiping gland 1 x 3C O O O RMR-A10 Brass wiping gland 3 x 1C O O O RMR-A11 Tuular gland 1 x 3C O O O RMR-A12 Tuular gland 3 x 1C O O O RMR-A13 CES5 gland plate 1 x 3C O O O RMR-A132 Installation items Set of padlocks - XX no O O O RMR-A18/6 Foundation olts (not required for transformer mounting) O O O RMR-A22 Multicore pilot glands O O O RMR-A16 RMU - MU2 installation kit O O O RMR-A350 Freestanding installation kit O O O RMR-A90 Order codes 12kV, 16kA, 75kV BIL, 0.35G MU2-M1/16 MU2-M2/16 MU2-M3/16 General arrangement drawing - transformer mounted RMINST-07/08 Page RMINST-07/08 Page RMINST-07/08 Page Schematic diagram RMSCH-14 Page 90 RMSCH-14 Page 90 RMSCH-14 Page 90 Key: v Factory fitted accessory O Loose accessory, assemled on site 28
11 Non-extensile metering unit 200A 0 MU2-M1 DE60210 Non-extensile metering unit N/A Metering transformers Metering CT s R & B phases v 50/25/5A v 7.5VA class 0.5s Metering VT ph - ph v 11kV/110V 50VA v class 0.5 Installation drawing ref: RMINST-07/08 Schematic drawing ref: RMSCH-14 Short time withstand 16kA 1s Normal current rating 200A Normal rated voltage 12kV Normal rated BIL 75kV Direct coupling etween RMU and transformer (optional freestanding cale connection) Cale connection Cale ox Installation kits See page 28 for details MU2-M1/16 16kA, 12kV, 75kV BIL 29
12 Non-extensile metering unit 200A 0 MU2-M2 DE60210 Non-extensile metering unit N/A Metering transformers Metering CT s R & B phases v 100/50/5A v 10VA class 0.5s Metering VT ph - ph v 11kV/110V 50VA v class 0.5 Installation drawing ref: RMINST-07/08 Schematic drawing ref: RMSCH-14 Short time withstand 16kA 1s Normal current rating 200A Normal rated voltage 12kV Normal rated BIL 75kV Direct coupling etween RMU and transformer (optional freestanding cale connection) Cale connection Cale ox Installation kits See page 28 for details MU2-M2/16 16kA, 12kV, 75kV BIL 30
13 Non-extensile metering unit 200A 0 MU2-M3 DE60210 Non-extensile metering unit N/A Metering transformers Metering CT s R & B phases v 200/100/5A v 10VA class 0.5s Metering VT ph - ph v 11kV/110V 50VA v class 0.5 Installation drawing ref: RMINST-07/08 Schematic drawing ref: RMSCH-14 Short time withstand 16kA 1s Normal current rating 200A Normal rated voltage 12kV Normal rated BIL 75kV Direct coupling etween RMU and transformer (optional freestanding cale connection) Cale connection Cale ox Installation kits See page 28 for details MU2-M3/16 16kA, 12kV, 75kV BIL 31
14 Specification Extensile circuit reakers 200A 0 T2 T3 Indoor / outdoor Busars 630A Circuit reaker normal rated current 200A 12kV 16kA 3 seconds 75kV BIL 13.8kV 21kA 3 seconds 95kV BIL O O O O O O O O O O O O Cale earth switch 16kA 3 seconds Cale earth switch 21kA 3 seconds O O O O O O O O O O O O Mechanism Provision for actuator 24V DC Actuator 24V DC O O O O Operating handle Protection system CT s dual ratio - 500/200/1A class x Overcurrent relay - VIP 30 CT s dual ratio - 100/50/5A class X CT ratio - 200/1A class X Overcurrent & earth fault CT operated trip coils Overcurrent & earth fault relay VIP 35 Time fuse link O IDMT overcurrent & earth fault relay - VIP V-250V shunt trip coil Auxiliary switch 1NO 2NC Metering CT s -200/100/5A 0.5s 10VA VT s -13.8kV/110V VA 13.8/110V/110v VA 3P 20VA VT s -11kV/110V VA VT s -6.6kV/110V VA VT s phase - phase, CT s R & B VT s phase - earth, CT s RYB Mechanical ON/OFF Mechanical EARTH/MAIN Cale neon indication ( KV) O O O O O O O O O O O O Auxiliary switch contacts 1NO 2NC Earth selected auxiliary contacts 1NO Integral cale test facility Cale Top entry cales O O O O O O O O O O O O Key: Standard feature O Optional feature T7 T11 T12 T13 T14 T15 T16 T19 T20 T21 32
15 Extensile circuit reakers 200A 0 T2 T3 T7 T11 T12 Cale kits Gland plate 1 x 3C O O O O O O O O O O O O RMR-A48 Gland plate 3 x 1C O O O O O O O O O O O O RMR-A49 Angled gland plates (RMR) O O O O O O O O O O O O RMR-A50 Blank aluminium gland plate O O O O O O O O O O O O RMR-A52 Brass wiping gland 1 x 3C O O O O O O O O O O O O RMR-A10 Brass wiping gland 3 x 1C O O O O O O O O O O O O RMR-A11 Tuular gland 1 x 3C O O O O O O O O O O O O RMR-A12 Tuular gland 3 x 1C O O O O O O O O O O O O RMR-A13 CES5 gland plate 1 x 3C O O O O O O O O O O O O RMR-A132 Top entry cales standard v v v v v RMR-F93 panels Top entry cales MU6 only v v v v v v v RMR-F94 Installation items 3 phase usars 630A O O O O O RMR-A14 3 phase usars 630A O O O O O O O RMR-A78 Busar end kit O O O O O O O O O O O O RMR-A15 Set of padlocks - 6 no O O O O O O O O O O O O RMR-A18/6 Foundation olts (not required RMR-A22 for transformer mounting) Multicore pilot glands O O O O O O O O O O O O RMR-A16 Time limit fuses (set of 2 - specify O RMR-A17 rating as tale page 113) Operational items Operating handle RMR-A23 Cale neon indication v v v v v v v v v v v v RMR-F108 ( kV) Neon lamp test unit v v v v v v v v v v v v RMR-A24 (including lamp) Neon lamp O O O O O O O O O O O RMR-A81 VAP 6 test unit for VIP 300 O O O O O O O O O O O RMR-A202 Actuator 24V DC v v v RMR-F67 Polarity conversion kit** v v v RMR-F391 Mechanical interlocks Key free, EARTH ON v v v v v v RMR-F85 Key free, MAIN OFF v v v v v v RMR-F86 N. B. specify lock symol at time of ordering (3 digits max) not availale with motor mechanisms Key: Standard feature v Factory fitted accessory O Loose accessory, assemled on site **Only required when unit is used with RE2c ring main units and automation. T13 T14 T15 T16 T19 T20 T21 Kit no. 33
16 Extensile circuit reakers 200A 0 T2 T3 T7 T11 T12 Earth fault passage indication (choose provision kit and an EFPI required if not using Easergy 200E) EFPI provision kit, inside O O O O O O O O O O O O RMR-F30 cale ox Bowden STD EFPI type NB O O O O O O O O O O O O RMR-A277 Bowden LV reset EFPI type NB1 O O O O O O O O O O O O RMR-A278 Bowden LV reset & alarm O O O O O O O O O O O O RMR-A279 type NB2 Bowden RR EFPI and CT O O O O O O O O O O O O RMR-A56 Fundamentals ER FIND O O O O O O O O O O O O RMR-A57 EFPI and CT Ancillary items Tool ox O O O O O O O O O O O O RMR-A80 Order code 12kV, 16kA, 75kV BIL, 0.35G 13.8kV, 21kA, 95kV BIL, 0.8G General arrangement drawing Schematic drawing T2/16 T2/21 RMINST-03 Page 68 RMSCH-07 Page 86 T3/16 T3/21 RMSCH-09 Page 88 T7/16 T7/21 RMINST-03 Page 68 RMSCH-06 Page 85 T11/16 T11/21 RMSCH-09 Page 88 T12/16 T12/21 RMINST-03 Page 68 RMSCH-19 Page 94 T13 T13/16 T13/21 RMSCH-20 Page 95 T14 T14/16 T14/21 RMSCH-20 Page 95 Key: Standard feature v Factory fitted accessory O Loose accessory, assemled on site **Only required when unit is used with RE2c ring main units and automation. T15 T15/16 T15/21 RMINST-03 Page 68 RMSCH-07 Page 86 T16 T16/16 T16/21 RMINST-03 Page 68 RMSCH-07 Page 86 T19 N/A T19/21 RMSCH-35 Page 103 T20 T20/16 N/A RMSCH-35 Page 103 T21 N/A T21/21 RMSCH-36 Page 104 Kit no. 34
17 Extensile circuit reaker 200A 0 T2 DE60251 Feeder protection up to 3.5MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC and BS142. Protection CT s - 200/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: A v Earth fault: 2-160A Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-07 Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2NC Integral cale test facilities Cale Neon indication Operating handle Busar kit Top entry cales See page 33 for details T2/16 T2/21 16kA, 12kV, 75kV BIL 35
18 Extensile circuit reaker 200A 0 T7 DE60196 Transformer protection up to 1.5MVA at 11kV Overcurrent and earth fault protection using CT operated trip coils with provision for time fuse links. Protection CT s - 100/50/5A class X Shunt trip coil, 20V DC-250V AC Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-06 Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2NC Integral cale test facility Cale Neon indication Operating handle Busar kit Top entry cales See page 33 for details T7/16 T7/21 16kA, 12kV, 75kV BIL 36
19 Extensile circuit reaker 200A 0 T* DE60252 (Select VT rating and switchgear rating from tale elow). Feeder protection up to 3.5MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC and BS142. Protection CT s - 200/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: A v Earth fault: 2-160A Metering transformers Metering CT s R & B phases v 200/100/5A v 10VA class 0.5s Metering VT v see elow Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2NC Integral cale test facility Cale Neon indication Operating handle Busar kit Top entry cales See page 33 for details Order code 16kA, 12kV, 75kV BIL Metering VT information: Phase to phase T3/16 T3/21 T11/16 T11/21 N/A T19/21 Phase to earth 6.6kV/110V 11kV/110V* 13.8kV/110V General arrangement drawing Schematic diagram RMSCH-09 Page 88 RMSCH-09 Page 88 RMSCH-35 Page 103 T20/16 N/A RMSCH-35 Page 103 *Please consult Merlin Gerin when ordering units with 95kV BIL voltage Tel: +44(0)
20 Extensile circuit reaker 200A 0 T12 DE60253 M Feeder protection up to 3.5MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC and BS142. Protection CT s - 200/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: A v Earth fault: 2-160A Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-19 Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Provision for actuator, 24V DC Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2 NC Earth selected auxiliary contact1no Integral cale test facility Cale Actuator, 24V DC Neon indication Operating handle Busar kit Top entry cales See page 33 for details T12/16 T12/21 16kA, 12kV, 75kV BIL 38
21 Extensile circuit reaker 200A 0 T* DE60254 (Select VT rating and switchgear rating from tale elow). Feeder protection up to 3.5MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC and BS142. Protection CT s - 200/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: A v Earth fault: 2-160A Metering transformers Metering CT s v 200/100/5A v 10VA class 0.5s Metering VT v see elow Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Provision for actuator, 24V DC Cale earth switch, 16/21kA 3s Mechanical tripped on fault indicator Auxiliary contacts,1no 2NC Earth selected auxiliary contact1no Integral cale test facility Cale Actuator, 24V DC Neon indication Operating handle Busar kit Top entry cales See page 33 for details Order code 16kA, 12kV, 75kV BIL Metering VT information: Phase to phase Phase to earth 6.6kV/110V 11kV/110V* 13.8kV/110V General arrangement drawing Schematic diagram T14/16 T14/21 RMSCH-20 Page 95 N/A T21/21 RMSCH-36 Page 104 *Please consult Merlin Gerin when ordering units with 95kV BIL voltage Tel: +44(0)
22 Extensile circuit reaker 200A 0 T13 DE60254 Feeder protection up to 3.5MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC and BS142. Protection CT s - 200/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: A v Earth fault: 2-160A Metering transformers Metering CT s v 200/100/5A v 10VA class 0.5s Metering VT ph - ph v 11kV/110V 50VA v class 0.5 Installation drawing ref: Schematic drawing ref: RMSCH-20 Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Actuator, 24V DC Cale earth switch, 16/21kA 3s Mechanical tripped on fault indicator Auxiliary contacts,1no 2NC Earth selected auxiliary contact1no Integral cale test facility Cale Neon indication Operating handle Busar kit Top entry cales See page 33 for details T13/16 T13/21 16kA, 12kV, 75kV BIL 40
23 Extensile circuit reaker 200A 0 T15 DE60251 Feeder protection up to 2.5MVA at 11kV Self powered overcurrent relay, VIP 30. Protection CT s - 500/200/1A class X Setting range: 500/1A v Overcurrent: A Setting range: 200/1A v Overcurrent: 8-80A Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-12 Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2NC Integral cale test facilities Cale Neon indication Operating handle Busar kit Top entry cales See page 33 for details T15/16 T15/21 16kA, 12kV, 75kV BIL 41
24 Extensile circuit reaker 200A 0 T16 DE60255 Feeder protection up to 2.5MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 35. Protection CT s - 500/200/1A class X CH30 core alance CT Setting range: 500/1A v Overcurrent: A v Earth fault: A Setting range: 200/1A v Overcurrent: 8-80A v Earth fault: A Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-13 Busars 630A Short time withstand 16/21kA 3s Normal current rating 200A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2NC Integral cale test facilities Cale Neon indication Operating handle Busar kit Top entry cales See page 33 for details T16/16 T16/21 16kA, 12kV, 75kV BIL 42
25 Specification Extensile circuit reakers 630A 0 T4 T5 Indoor / outdoor Busars 630A Circuit reaker normal rated current 630A 12kV 16kA 3 seconds 75kV BIL 13.8kV 21kA 3 seconds 95kV BIL O O O O O O O O O Cale earth switch 16kA 3 seconds Cale earth switch 21kA 3 seconds O O O O O O O O O Mechanism Provision for actuator 24V DC Actuator 24V DC O O O O Operating handle Protection system CT ratio - 800/1A class X IDMT overcurrent & earth fault relay - VIP V-250V shunt trip coil Auxiliary switch 1NO 2NC Metering CT s - 400/200/5A 0.5s 10VA VT s kV/110V/110V/ VA 3P 20VA VT s - 11V/110V VA VT s - 6.6kV/110V VA VT s - phase - phase, CT s R & B VT s phase - earth, CT s RYB Mechanical ON/OFF Mechanical EARTH/MAIN Cale neon indication ( KV) O O O O O O O O O Auxiliary switch contacts 1NO 2NC CT 600/5A 5VA CLS 1 Yph Ammeter 0-600A Earth selected auxiliary contacts 1NO Integral cale test facility Cale Top entry cales O O O O O O O O O Key: Standard feature O Optional feature T6 T8 T9 T10 T22 T23 T24 43
26 Extensile circuit reakers 630A 0 T4 T5 T6 T8 T9 T10 T22 T23 T24 Kit no. Cale kits Gland plate 1 x 3C O O O O O O O O O RMR-A48 Gland plate 3 x 1C O O O O O O O O O RMR-A49 Angled gland plates (RMR) O O O O O O O O O RMR-A50 Blank aluminium gland plate O O O O O O O O O RMR-A52 Brass wiping gland 1 x 3C O O O O O O O O O RMR-A10 Brass wiping gland 3 x 1C O O O O O O O O O RMR-A11 Tuular gland 1 x 3C O O O O O O O O O RMR-A12 Tuular gland 3 x 1C O O O O O O O O O RMR-A13 CES5 gland plate 1 x 3C O O O O O O O O O RMR-A132 Top entry cales standard panels v v RMR-F93 Top entry cales MU6 only v v v v v v v RMR-F94 Installation items 3 phase usars 630A O O RMR-A14 3 phase usars 630A O O O O O O O RMR-A78 Busar end kit O O O O O O O O O RMR-A15 Set of padlocks - 6 no O O O O O O O O O RMR-A18/6 Foundation olts (not required for RMR-A22 transformer mounting) Multicore pilot glands O O O O O O O O O RMR-A16 Operational items Operating handle RMR-A23 Cale neon indication ( kV) v v v v v v v v v RMR-A108 Neon lamp test unit (including lamp) O O O O O O O O O RMR-A24 Neon lamp O O O O O O O O O RMR-A81 VAP 6 test unit for VIP 300 O O O O O O O O RMR-A202 Actuator 24V DC v v v v RMR-F67 Polarity conversion kit** v v v v RMR-F391 Mechanical interlocks Key free, EARTH ON v v v v v RMR-F85 Key free, MAIN OFF v v v v v RMR-F86 N. B. specify lock symol at time of ordering ( 3 digits max) not availale with motor mechanisms Earth fault passage indication (choose provision kit and an EFPI required if not using Easergy T200E) EFPI provision kit, inside cale ox O O O O O O O O O RMR-F30 Bowden STD EFPI type NB O O O O O O O O O RMR-A277 Bowden LV reset EFPI type NB1 O O O O O O O O O RMR-A278 Bowden LV reset & alarm type NB2 O O O O O O O O O RMR-A279 Bowden RR EFPI and CT O O O O O O O O O RMR-A56 Fundamentals ER FIND EFPI and CT O O O O O O O O O RMR-A57 Ancillary items Tool ox O O O O O O O O O RMR-A80 Order code 12kV, 16kA, 75kV BIL, 0.35G 13.8kV, 21kA, 95kV BIL, 0.8G General arrangement drawing Schematic drawing T4/16 T4/21 RMINST-03 Page 68 RMSCH-08 Page 87 T5/16 T5/21 RMSCH-10 Page 89 T6/16 T6/21 RMSCH-10 Page 89 T8/16 T8/21 RMINST-03 Page 68 RMSCH-23 Page 98 T9/16 T9/21 RMSCH-24 Page 99 Key: Standard feature v Factory fitted accessory O Loose accessory, assemled on site **Only required when unit is used with RE2c ring main units and automation. T10/16 T10/21 RMSCH-24 Page 99 N/A N/A T24/16 T22/21 RMSCH-37 Page 105 T12321 RMSCH-38 Page 106 N/A RMSCH-37 Page
27 Extensile circuit reaker 630A 0 T4 DE60256 Feeder protection up to 12MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC and BS142. Protection CT s - 800/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: A v Earth fault: 8-640A Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-08 Busars 630A Short time withstand 16/21kA 3s Normal current rating 630A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2 NC Ammeter 0-600A CT Y ph - 600/5A class 1.0, 5VA Integral cale test facility Cale Neon indication Busar kit Top entry cales See page 44 for details T4/16 T4/21 16kA, 12kV, 75kV BIL 45
28 Extensile circuit reaker 630A 0 T* DE60197 (Select VT rating and switchgear rating from tale elow). Feeder protection up to 12MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC and BS142. Protection CT s - 800/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: A v Earth fault: 8-640A Metering transformers Metering CT s v 400/200/5A v 10VA class 0.5s Metering VT v see elow Busars 630A Short time withstand 16/21kA 3s Normal current rating 630A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2 NC Ammeter 0-600A CT Y ph - 600/5A class 1.0, 5VA Integral cale test facility Cale Actuator, 24V DC Neon indication Busar kit Top entry cales See page 44 for details Order code 16kA, 12kV, 75kV BIL Metering VT information: Phase to phase T5/16 T5/21 T6/16 T6/21 N/A T22/21 Phase to earth 6.6kV/110V 11kV/110V* 13.8kV/110V General arrangement drawing Schematic diagram RMSCH-10 Page 89 RMSCH-10 Page 89 RMSCH-37 Page 105 T24/16 N/A RMSCH-37 Page 105 *Please consult Merlin Gerin when ordering units with 95kV BIL voltage Tel: +44(0)
29 Extensile circuit reaker 630A 0 T8 DE60257 Feeder protection up to 12MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC and BS142. Protection CT s - 800/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: A v Earth fault: 8-640A Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-23 Busars 630A Short time withstand 16/21kA 3s Normal current rating 630A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Provision for actuator, 24V DC Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2 NC Earth selected auxiliary contact1no Ammeter 0-600A CT Y ph - 600/5A class 1.0, 5VA Integral cale test facility Cale Actuator, 24V DC Neon indication Busar kit Top entry cales See page 44 for details T8/16 T8/21 16kA, 12kV, 75kV BIL 47
30 Extensile circuit reaker 630A 0 T* DE60199 (Select VT rating and switchgear rating from tale elow). Feeder protection up to 12MVA at 11kV Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC and BS142. Protection CT s - 800/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: A v Earth fault: 8-640A Metering transformers Metering CT s v 400/200/5A v 10VA class 0.5s Metering VT v see elow Busars 630A Short time withstand 16/21kA 3s Normal current rating 630A Normal rated voltage 12/13.8kV Normal rated BIL 75/95kV Cale earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2 NC Earth selected auxiliary contacts Ammeter 0-600A CT Y ph- 600/5A class 1.0, 5VA Integral cale test facility Cale Neon indication Busar kit Top entry cales See page 44 for details Order code 16kA, 12kV, 75kV BIL Metering VT information: Phase to phase Phase to earth 6.6kV/110V 11kV/110V* 13.8kV/110V General arrangement drawing Schematic diagram T9/16 T9/21 RMSCH-24 Page 99 T10/16 T10/21 RMSCH-24 Page 99 N/A T23/21 RMSCH-38 Page 106 *Please consult Merlin Gerin when ordering units with 95kV BIL voltage Tel: +44(0)
31 Specification Extensile switches 630A 0 SE6-S1 SE6-S2 SE6-E1 Indoor / outdoor Busars 630A Switch normal rated current 630A 13.8kV 21kA 3 seconds 95kV BIL Cale earth switch 21kA 3 seconds Mechanism Provision for actuator 24V DC Actuator 24V DC O Operating handle Mechanical ON/OFF Mechanical EARTH/MAIN Cale neon indication ( kV) v v Busar neon indication ( kV) v v Auxiliary switch contacts1no 1 NC v Phase and earth fault detection CT s for Easergy T200E O EFPI provision only CT inside ox O O Integral cale test facility Integral test facility RH/LH usar earthing Cale (see availale cale kit accessories) Top entry cales O O Key: Standard feature v Factory fitted accessory O Loose accessory, assemled on site 49
32 Extensile switches 630A 0 SE6-S1 SE6-S2 SE6-E1 Kit no. Cale kits Gland plate 1 x 3C O O RMR-A48 Gland plate 3 x 1C O O RMR-A49 Angled gland plates (RMR) O O RMR-A50 Blank aluminium gland plate O O RMR-A52 Brass wiping gland 1 x 3C O O RMR-A10 Brass wiping gland 3 x 1C O O RMR-A11 Tuular gland 1 x 3C O O RMR-A12 Tuular gland 3 x 1C O O RMR-A13 CES5 gland plate 1 x 3C O O RMR-A132 Top entry cales v v RMR-F93 Installation items 3 phase usars 630A O O v RMR-A14 Set of padlocks - 6 no O O O RMR-A18/6 Busar end kit (1 end kit required per switchoard) O O O RMR-A15 Foundation olts (not required for transformer mounting) RMR-A22 Multicore pilot glands O RMR-A16 Operational items Operating handle RMR-A23 Cale neon indication ( kV) v v RMR-F108 Cale and usar neon indication ( kV) v v RMR-F92 Neon lamp test unit (including lamp) O O RMR-A24 Neon lamp O O RMR-A81 Actuator 24V DC v RMR-F67 Polarity conversion kit* v RMR-F391 Mechanical interlocks Key free, earth ON v v RMR-F85 Key free, main OFF v RMR-F86 N. B. specify lock symol at time of ordering ( 3 digits max) not availale with motor mechanisms EFPI provision kit, inside cale ox O O RMR-F30 Bowden STD EFPI NB O O RMR-A277 Bowden LV reset EFPI type NB1 O O RMR-A278 Bowden LV reset & alarm type NB2 O O RMR-A279 Bowden RR EFPI and CT O O RMR-A56 Fundamentals ER FIND EFPI and CT O O RMR-A57 Ancillary items Tool ox O O O RMR-A80 Order code 13.8kV, 21kA, 95kV BIL, 0.8G SE6-S1/21 SE6-S2/21 SE6-E1/21 General arrangement drawing RMINST-03 Page 68 RMINST-03 Page 68 Schematic drawing N/A RMSCH-29 Page 102 Key: Standard feature v Factory fitted accessory O Loose accessory, assemled on site **Only required when unit is used with RE2c ring main units and automation. RMINST-03 Page 68 N/A 50
33 Extensile switch 630A 0 SE6-S1 DE60201 Switch disconnector Non-automatic Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-N/A Busars 630A Short time withstand 21kA 3s Normal current rating 630A Normal rated voltage 13.8kV Normal rated BIL 95kV Cale earth switch, 21kA 3s s Integral cale test facility Cale Neon indication Busar kit Top entry cales See page 50 for details SE6-S1/21 51
34 Extensile switch 630A 0 SE6-S2 DE60202 Switch disconnector Non-automatic Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-29 Busars 630A Short time withstand 21kA 3s Normal current rating 630A Normal rated voltage 13.8kV Normal rated BIL 95kV Provision for actuator, 24V DC Cale earth switch, 21kA 3s Auxiliary contacts,1no 2NC Earth selected auxiliary contact 1NO Integral cale test facility Cale Actuator, 24V DC Neon indication Busar kit Top entry cales See page 50 for details SE6-S2/21 52
35 Extensile usar earthing switch 630A 0 SE6-E1 DE60203 Busar earthing switch Installation drawing ref: RMINST-03 Schematic drawing ref: RMSCH-N/A Busars 630A Short time withstand 21kA 3s Normal current rating 630A Normal rated voltage 13.8kV Normal rated BIL 95kV Cale earth switch, 21kA 3s N/A Cale N/A Busar kit See page 50 for details SE6-E1/21 53
36 Specification Extensile us-section 630A 0 SE6-B1 B3 B5 Indoor / outdoor Busars 630A Circuit reaker normal rated current 630A Switch normal rated current 630A 12kV 16kA 3 seconds 75kV BIL 13.8kV 21kA 3 seconds 95kV BIL O O RH usar earth switch 16kA 3 seconds RH usar earth switch 21kA 3 seconds O O Mechanism Provision for actuator 24V DC Actuator 24V DC O Operating handle Protection system CT ratio - 800/1A class X IDMT overcurrent & earth fault relay - VIP V - 250V shunt trip coil Auxiliary switch1no 2 NC Metering CT s - 400/200/5A 0.5s 10VA VT s - 11kA/110V VA VT s phase - phase, CT s R & B Mechanical ON/OFF Mechanical EARTH/MAIN Earth selected auxiliary contact1no RH usar neon indication O O O Auxiliary switch contacts1no 2NC CT 600/5A 5VA CLS 1 Y phase Ammeter 0-600A Integral test facility RH usar earthing LH usar earthing ( using SE6-E1) O O O Key: Standard feature O Optional feature 54
37 Extensile us section 630A 0 SE6-B1 B3 B5 Kit no. Installation items 3 phase usars 630A RMR-A14 3 phase usars 630A (Joggle metering) v v v RMR-A79 3 phase usars 630A doule width (metering) v v v RMR-A78 Set of padlocks - XX no O O O RMR-A18/6 Busar end kit (1 end kit required per switchoard) O O O RMR-A15 Foundation olts (not required for transformer mounting) RMR-A22 Multicore pilot glands O O RMR-A16 Operational items Operating handle RMR-A23 LH and RH usar neon indication v v v RMR-F92 Neon lamp test unit (including lamp) O O RMR-A24 Neon lamp O O O RMR-A81 VAP6 test unit for VIP 300 O O RMR-A202 Actuator 24V DC v RMR-F67 Polarity conversion kit* v RMR-F391 Mechanical interlocks Key free, earth ON v v RMR-F85 Key free, main OFF v v RMR-F86 N. B. specify lock symol at time of ordering ( 3 digits max) not availale with motor mechanisms Ancillary items Tool ox O O O RMR-A80 Order code 12kV, 16kA, 75BIL, 0.35G N/A B3/16 B5/ kV, 21kA, 95kV BIL, 0.8G SE6-B1/21 B3/21 B5/21 General arrangement drawing RMINST-01 Page 66 RMINST-01 Page 66 Schematic drawing N/A RMSCH-21 Page 91 Key: Standard feature v Factory fitted accessory O Loose accessory, assemled on site **Only required when unit is used with RE2c ring main units and automation. RMINST-01 Page 66 RMSCH-22 Page 97 55
38 Extensile us-section 630A 0 SE6-B1 DE60204 Bus-section disconnector Protection & control Non-automatic Installation drawing ref: RMINST-01 Schematic drawing ref: N/A Busars 630A Short time withstand 21kA 3s Normal current rating 630A Normal rated voltage 13.8kV Normal rated BIL 95kV RH usar earth switch, 21kA 3s Integral RH usar test facility Cale N/A Neon indication Busars See page 55 for details SE6-B1/21 56
39 Extensile us-section 630A 0 B3 DE60258 Bus-section circuit reaker Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC and BS142. Protection CT s - 800/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: A v Earth fault: 8-640A Metering transformers Metering CT s v 400/200/5A v 10VA class 0.5s Metering VT ph-ph v 11kV/110V 50VA v class 0.5 Installation drawing ref: RMINST-01 Schematic drawing ref: RMSCH-21 Busars 630A Short time withstand 16/21kA 3s Normal current rating 630A Normal rated voltage 13.8kV Normal rated BIL 75/95kV RH usar earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2 NC Ammeter 0-600A CT Y ph- 600/5A class 1.0 5VA Integral RH usar test facility Cale N/A Neon indication Busars See page 55 for details B3/16 B3/21 16kA, 12kV, 75kV BIL 57
40 Extensile us-section 630A 0 B5 DE60259 Bus-section circuit reaker Self powered IDMT overcurrent and earth fault relay, VIP 300. In accordance with IEC and BS142. Protection CT s - 800/1A class X Shunt trip coil, 20V DC-250V AC Setting range: v Overcurrent: A v Earth fault: 8-640A Metering transformers Metering CT s v 400/200/5A v 10VA class 0.5s Metering VT ph-ph v 11kV/110V 50VA v class 0.5 Installation drawing ref: RMINST-01 Schematic drawing ref: RMSCH-22 Busars 630A Short time withstand 16/21kA 3s Normal current rating 630A Normal rated voltage 13.8kV Normal rated BIL 75/95kV Provision for actuator, 24V DC RH usar earth switch, 16/21kA 3s Mechanical tripped on fault flag indicator Auxiliary contacts,1no 2 NC Earth selected auxiliary contacts1no Ammeter 0-600A CT Y ph- 600/5A class 1.0 5VA Integral RH usar test facility Cale N/A Actuator, 24V DC Neon indication Busars See page 55 for details B5/16 B5/21 16kA, 12kV, 75kV BIL 58
Ring main units non-extensible 0
Specification Ring main units non-extensile 0 RN2c-T1 TFL RN2c-T2 VIP 300 RN2c-T3 VIP 30 RN2c-T4 VIP 35 RN2c-T5 Glass TFL RN6c-T1 VIP 300 Indoor / outdoor Transformer mounted Freestanding O O O O O Busars
More informationMedium Voltage Distribution. Ringmaster. Ring Main Unit. Catalogue 2009
Medium Voltage Distriution Ringmaster Ring Main Unit Catalogue 2009 A new path for achieing your electrical installations A comprehensie offer The Ringmaster range is part of a comprehensie offer of products
More informationMedium Voltage Distribution Catalogue 2012. Ringmaster. Ring Main Unit
Medium Voltage Distribution Catalogue 2012 Ringmaster Ring Main Unit Ringmaster range General contents Presentation 3 Ring main units 15 Circuit breaker, metering and switches 35 Remote control 83 Installation
More informationHow To Choose A Transformer
Consider open loop MV network as an example source 1 source 2 NC NC NC or NO main MV switchboard A B Detail design of substation NC NC NC NO NC NC switchboard 1 switchboard 2 switchboard 3 MV MV MV LV
More informationMedium Voltage (MV) & High Voltage (HV) Training Module 6. Date of the presentation
Medium Voltage (MV) & High Voltage (HV) Training Module 6 Date of the presentation Electrical System Basics MV vs. HV - Definitions Differences between USA and the rest of the world IEC define a high voltage
More informationMEDIUM VOLTAGE CE-BF SWITCHBOARDS. UP TO 40.5 kv. CE - BF - C - en - REV.00 2012.4
CE - BF - C - en - REV.00 2012.4 APPLICATION CE-BF Switchbords up to 40.5 kv are designed for use in public and industrial distribution system up to 40,5KV for the operation and protection of lines, transformers,
More informationR.C.C.B. s two-pole LEXIC
87045 LIMOGES Cedex Telephone : (+33) 05 55 06 87 87 Fax : (+ 33) 05 55 06 88 88 R.C.C.B. s two-pole LEXIC 089 06/09/10/11/12/15/16/17/18/ 27/28/29/30/35, CONTENTS PAGES 1. Electrical and mechanical characteristics...
More informationLow voltage Direct Current Network. Compact NSX DC PV. Circuit breakers and switch disconnectors for solar application.
Low voltage Direct Current Network Compact NSX DC PV Circuit breakers and switch disconnectors for solar application Catalogue 2012 Compact NSX DC PV A complete DC offer for solar application from 80
More informationReyrolle Protection Devices. 7PG17 - XR Intertripping, Interposing, Supervision and Special Purpose Relays. Answers for energy
Reyrolle Protection Devices 7PG17 - XR Intertripping, Interposing, Supervision and Special Purpose Relays. Answers for energy Siemens Protection Devices Limited 2 7PG17 XR101 & XR102 Intertripping Relay
More informationSENTRON Switching and Protection Devices Air Circuit Breakers
Siemens AG 9 SENTRON Switching and rotection Devices Air Circuit reakers 5 5/ Introduction 3WL Air Circuit reakers 3WL Air Circuit reakers/ Non-Automatic Air Circuit reakers up to 63 A (AC) 5/6 General
More information2a. IEM Indoor Metal Clad Medium Voltage Switchgear 15KV 16346-1. 2a. Section 16346 INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std.
2a. IEM Indoor Metal Clad Medium Voltage Switchgear 15KV 16346-1 2a. Section 16346 INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std. Relays) Part 1 General 1.1 CONDITIONS AND REQUIREMENTS: A. Refer to
More information8146/5 Series Breaker Panelboards
8146/5 Series Breaker Panelboards DISTRIBUTION BREAKER PANELBOARDS FOR HAZARDOUS & CORROSIVE ENVIRONMENTS Breaker Panels Features: Wide variety of Flameproof branch circuit breakers for Zone 1 & Division
More informationFEDERAL ELECTRICITY & WATER AUTHORITY
UNITED ARAB EMIRATES FEDERAL ELECTRICITY & WATER AUTHORITY SPECIFICATION FOR 433 VOLTS SWITCHGEARS (LVAC BOARD) LVAC SWITCHBOARDS I N D E X CLAUSE TITLE 1. GENERAL 2. TEMPERATURE RISE 3. BUSBARS 4. CONSTRUCTION
More informationSecondary Unit Substations
14 SWITCHGEAR Secondary Unit Substations Overview Siemens offers a wide variety of unit substation designs to meet customer requirements. A unit substation consists of one or more transformers mechanically
More informationCurrent transformer selection guide
The selection of a current transformer is a simple task. There are four phases in the selection procedure. Current transformer selection guide KEEP IN MIND efine customer requirements based on the primary
More informationUnified requirements for systems with voltages above 1 kv up to 15 kv
(1991) (Rev.1 May 2001) (Rev.2 July 2003) (Rev.3 Feb 2015) Unified requirements for systems with voltages above 1 kv up to 15 kv 1. General 1.1 Field of application The following requirements apply to
More informationPRODUCT GUIDE. SL Medium Voltage IEC Vacuum Contactors
PRODUCT GUIDE SL Medium Voltage IEC Vacuum Contactors Table of Contents 1 Overview Introduction....................................................2 Features........................................................2
More informationThe standards mentioned in this document
The standards mentioned in this document Where can you order IEC publications? Central Offices of the International Electrotechnical Commission 1, rue de Varembé Geneva - Switzerland. The documentation
More informationBussmann. All-In-One Module. Bussmann Power Module Switch. How to configure Part Numbers: Step 1: Select Switch Amperage 1
How to configure Part Numbers: Step : Select Switch Amperage Power Module Switch Rating (Amps) Power Module Switch Catalog No. 30 3 60 6 00 200 2 400 4 Step 2: Select Options Needed 5 Bussmann Power Module
More informationCENTERLINE Motor Control Centers Bulletin 2100 Smoke Detector Unit
Instructions CENTERLINE Motor Control Centers Bulletin 2100 Smoke Detector Unit Catalog Number 2100-SD1 Description The Bulletin 2100 smoke detector unit is a 0.5 space factor unit for use in Bulletin
More informationOVERCURRENT & EARTH FAULT RELAYS. To study the protection of equipment and system by relays in conjunction with switchgear.
OVERCURRENT & EARTH FAULT RELAYS Objective: To study the protection of equipment and system by relays in conjunction with switchgear. Theory: The function of a relay is to detect abnormal conditions in
More informationSUBJECT: How to wire a motor starter Number: AN-MC-004 Date Issued: 2/08/2005 Revision: Original
SUBJECT: How to wire a motor starter Number: AN-MC-004 Date Issued: 2/08/2005 Revision: Original A motor starter is a combination of devices to allow an induction motor to start, run and stop according
More informationDead Tank Circuit Breaker 72PM40-C Proven reliability through common platforms
Dead Tank Circuit Breaker 72PM40-C Proven reliability through common platforms ABB innovations for changing demands ABB (www.abb.com) is a leader in power and automation technologies that enables utility
More informationTrip circuit supervision relay. Type RXTCS
Trip circuit supervision relay Type RXTCS ABB a global technology leader ABB is a global leader in Power and Automation technologies that enable utility and industry customers to improve performance while
More informationCircuit Breakers. NRC Series. NRC Series. 900 www.idec.com
Switches & Pilot Lights Display Lights NRC series circuit breakers offer circuit protection which is far superior to using fuses in applications containing relay circuits, motor circuits, heater circuits,
More informationOUTDOOR DISCONNECTORS A division of ACTOM (Pty) Ltd
OUTDOOR DISCONNECTORS A division of ACTOM (Pty) Ltd ACTOM OUTDOOR DISCONNECTORS Single Side Break (SSB) Disconnector 22-132 kv, 800-1 A, 25 ka - 3s Typical bearing assembly. Voltage range 11 kv to 132
More informationPressure monitoring equipment for oil-sf 6. bushings, type GOEK
Pressure monitoring equipment for oil-sf 6 bushings, type GOEK Installation and maintenance guide 5693 827-6 en, Rev. 3, 2002-01-30 This document must not be copied without our written permission, and
More informationInductive Sensors Single or Dual Loop Detectors Type LD with teach-in
Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in Single or Dual loop detector Automatically adjustment of detection level Manual sensitivity for compensations of variations Easy installation
More informationSubmit shop drawings for equipment provided under this section Shop drawings shall indicate:
Section 16435 - SWITCHBOARDS Introduction Part 1 - General Reference The work under this section is subject to requirements of the Contract Documents including the General Conditions, Supplementary Conditions,
More informationCurrent valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw
4 937 DESIO Current valve for AC 24 V pulse/pause control of electrical loads up to 30 kw SEA45.1 Use The current valve is used for the control of electric heating elements in heating, ventilation and
More informationCompact, Interpact and Masterpact. Source changeover system. Catalogue 2007
Compact, Interpact and Masterpact Source changeover system Catalogue 2007 PB100839 To ensure a continuous supply of electrical power, certain installations are connected to two sources: a normal source
More informationVario-Series Accessories
Accessories and spare parts for GMW analogue panel meters and controllers Current Transformers pages 2-9 Shunt Resistors 10-11 Voltage Dividers 12 Power supply for indicator/controllers 13 Blanking Plates
More informationQUICK REFERENCE PRICE GUIDE JULY 2015
QUICK REFERENCE PRICE GUIDE JULY 2015 ISO 9001: 2008 OUR CUSTOMER CARE COMMITMENTS Quality is Guaranteed All products supplied from this Quick Price Guide carry a guarantee against defects in materials
More information3.1.1 Full Type Tests & Routine Tests according to Clause 8 2 & 8 3. 4.0 Instructions For Installation, Operation & Maintenance
SPECIFICATION FOR LOW VOLTAGE SWITCHBOARD SEN I N D E X Description 10 STANDARD TECHNICAL REQUIREMENTS 11 Standards 12 General Operating Conditions 13 General Description Of Switchboard 131 Structure 132
More informationUniGear ZS1. Medium voltage, arc proof, air insulated switchgear for primary distribution
UniGear ZS1 Medium voltage, arc proof, air insulated switchgear for primary distribution UniGear ZS1: an innovative solution for all installation requirements ABB UniGear is medium voltage metal-clad,
More informationPilot-wire differential relay for lines with two or more terminals
Pilot-wire differential relay for lines with two or more terminals Page 1 Issued: March 2003 Revision: A Data subject to change without notice Pilot-wire differential relay with RXHL 401 Features Phase
More informationAuxiliary Relay. Type P8n, PQ8n, PN8n
Auxiliary Relay Type P8n, PQ8n, PN8n ABB a global technology leader ABB is a global leader in Power and Automation technologies that enable utility and industry customers to improve performance while lowering
More informationPositive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
More informationVacuum Circuit Breaker CESI, KERI, CCC, ISO 9001, ISO 14001
Vacuum Circuit Breaker CESI, KERI, CCC, ISO 9001, ISO 14001 Vacuum Circuit Breaker General characteristics General characteristics 3 Ratings 4 Constructional and operating characteristics 6 Control circuit
More informationFor a phase-to-phase voltage between 100 V and 1000 V. The standard ratings are: 400 V - 690 V - 1000 V (at 50 Hz)
24 1. NETWORK CONFIGURATIONS definition Standard IEC 38 defines voltage ratings as follows: - Low voltage () For a phase-to-phase voltage between 100 V and 1000 V. The standard ratings are: 400 V - 690
More informationThe complete guide to Low Voltage switchgear
The complete guide to Low Voltage switchgear The complete guide to low voltage switchgear Contents 4-7 Merlin Gerin LV Switchgear An introduction to the Merlin Gerin low voltage range of switchgear, and
More informationT 3000. Substation Maintenance and Commissioning Test Equipment
T 3000 Substation Maintenance and Commissioning Test Equipment Multi function system for testing substation equipment such as: current, voltage and power transformers, all type of protection relays, energy
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
More informationArc Terminator Active Arc-Resistant Switchgear
Arc Terminator Active Arc-Resistant Switchgear Increasing safety and productivity by extinguishing internal arcing faults within the switchgear. The Square D Arc Terminator from Schneider Electric offers
More informationAP/UP, AP/MIL Series. Magnetic Circuit Protectors
AP/UP, AP/MIL Series Magnetic Circuit Protectors Introduction Poles Configurations Operating Characteristics Delay Curves Specifications Decision Tables 71 72 75 76 77 78 79 AP/UP, AP/MIL Series Hydraulic
More informationMini Motor Contactor J7KNA Main contactor Accessories Approved Standards Standard Guide No (US,C) Ordering Information tage Model Number Legend gear
Mini Motor Contactor J7KNA ) Main contactor AC & DC operated Integrated auxiliary contacts Screw fixing and snap fitting (35 mm DIN-rail) Range from 4 to 5.5 (AC 3, 380/415V) 4 -main pole version (4 AC
More informationCurrent and voltage measuring relays
Current and voltage measuring relays RXIK 1, RXEEB 1 and Page 1 Issued June 1999 Changed since July 1998 Data subject to change without notice RXIK 1 RXEEB 1 (SE980082) (SE980081) (SE970869) Features Application
More informationBRITISH STYLE SEMICONDUCTOR PROTECTION FUSES
The Edison British Style semiconductor protection fuses include a 660VAC line utilizing new filler technology. These new fuses have greatly reduced peak let-through current and energy under fault conditions
More informationTmax MCCBs. Molded case circuit breakers. Tmax
Molded case circuit breakers Introduction ABB is once again demonstrating its commitment to new product development and its superiority in product performance. Never before has the industry seen such high
More informationLV MCC LOW VOLTAGE SWITCHGEAR MOTOR CONTROL CENTRE PRODUCT GUIDE
LV MCC LOW VOLTAGE SWITCHGEAR MOTOR CONTROL CENTRE PRODUCT GUIDE 380/415/690 Volt AC 50/65/80/100 ka 1. Product Guide Low Voltage Motor Control Centre CONTSTRUCTION Continuous "poured in place" gasket
More informationPower factor correction and harmonic filtering. Rectimat 2 Automatic capacitor banks. Catalogue. Building a New Electric World
Catalogue 2002 Automatic capacitor banks Building a New Electric World 0Contents Power factor correction 2 Power factor equipment selection guide 3 General technical data 4 Capacitors and banks 50 z 6
More informationMasterpact NW Circuit breakers and switch-disconnectors from 800 to 6300 A
Low voltage electrical distribution Masterpact NW Circuit breakers and switch-disconnectors from 800 to 6300 A User manual 09/2009 User manual for circuit breakers and switch-disconnectors Masterpact
More informationRelion 605 series. Self-powered feeder protection REJ603 Product Guide
Relion 605 series Relion 605 series Relion 605 series Self-powered feeder protection Product Guide Product version: 3.0 Contents 1.... 3 2. Relay functions... 3 3. Protection functions... 4 4. Application...
More informationDRM75A 230V 20/100A DIN rail single phase two wire energy meter
DRM75A 230V 20/100A DIN rail single phase two wire energy meter 1.1 Safety instruction 1.2 Foreword 1.3 Performance criteria 1.4 Specifications 1.5 Basic errors 1.6 Description 1.7 Dimensions 1.8 Installation
More informationMedium voltage products UniSec for Smart Grid Air-insulated medium-voltage secondary distribution switchgear
Medium voltage products UniSec for Smart Grid Air-insulated medium-voltage secondary distribution switchgear Index 3 Overview 4 Standard Levels 6 Monitoring & Control 7 Measurements 8 Protection & Logic
More informationMedium Voltage Products. ZN1 12 kv arc-proof air-insulated switchgear for primary distribution
Medium Voltage Products ZN1 12 kv arc-proof air-insulated switchgear for primary distribution ZN1 an innovative switchgear for power distribution requirements ABB ZN1 primary distribution switchgear is
More informationChapter 1. Network Structures
Chapter 1 Network Structures Definition Standard IEC 60038 defines voltage ratings as follows: Low voltage (): for a phase-to-phase voltage of between 100 V and 1,000 V, the standard ratings are: 400 V
More informationVoltage Rated operating voltage [kv] 12 24 Rated power frequency withstand voltage [kv] 28 50 Rated lightning impulse withstand voltage [kv] 75 125
Standards and Regulations IEC 62271-200 ; VDE 0671-200 ; BS EN 62271-200 Technical Data MC3-12 MC3-24 Voltage Rated operating voltage [kv] 12 24 Rated power frequency withstand voltage [kv] 28 50 Rated
More informationManual Motor Starter MS 116 up to 16 A Technical Data
Manual Motor Starter MS 116 up to 16 A Technical Data Type MS 116 Standards: Major International IEC 60 947-4-1 / IEC 60 947-2 and European Standards EN 60 947-4-1 / EN 60 947-2 Approvals, Certificates
More informationEngineering Specification
Engineering Specification Electrical 33KV AC INDOOR SWITCHGEAR NON-WITHDRAWABLE Owner: Approved by: Chief Engineer, Electrical Neal Hook Chief Engineer Electrical Authorised by: Version 2.1 Issued May
More informationContents. Description. Product Selection Guide
.1 Medium Voltage Switchgear Introduction Indoor Type VCP-W Metal-Clad Switchgear Assembly (5/15 kv shown) Product Selection Guide Product Offering Chart Metal-Enclosed Contents Description Notes Additional
More informationEaton s E-Series protective relay family
E-Series protective relays Feeder distribution relays Motor relays Transformer relays Generator relays Eaton s E-Series protective relay family Microprocessor-based design Eaton s E-Series relay family
More informationPRE COMMISSIONING TESTS ON EQUIPMENT AT 33/11 KV SUB STATIONS
PRE COMMISSIONING TESTS ON EQUIPMENT AT 33/11 KV SUB STATIONS TESTS ON TRANSFORMERS 1. IR Values a) For 33/11 KV Power Transformer 2500 V megger is to be need. b) Power Transformer neutral Earthing is
More informationProduct Guide. Low voltage grounding system. Answers for industry.
Product Guide Low voltage grounding system Answers for industry. Advanced switchgear solutions for process industries In today s high-tech manufacturing world, profitability can be greatly impacted by
More informationADS8 IP54 Direct-On-Line Starter Technical Focus. Replaces ADS7 Rated up to 9kW
ADS8 IP54 Direct-On-Line Starter Technical Focus Replaces ADS7 Rated up to 9kW New ADS8 Motor Starter The new ADS8 range of motor starters replaces the successful ADS7 range which was introduced 20 years
More informationOur brand POWER DYNAMIC PASSION COMMITMENT CREATIVITY. A strong brand for strong products: 8PU Premium. MV Energy
Our brand A strong brand for strong products: The ENERGOLINE brand represents our product portfolio of INDUSTRIAL SWITCHGEAR SYSTEMS. Our products are characterized by a high degree of safety, flexibility
More informationCAS 36 Ring Main Unit
Power distribution networks Ring Main Unit Catalogue 2008 A new path for achieving your electrical installations A comprehensive offer The range is part of a comprehensive offer of products that are perfectly
More informationSection D..General Auto Electrical Corporation
43 Section D..General Auto Electrical Corporation 1. LED Based Signal unit GAEC manufacture LED based signaling system for use in electrified and non electrified sections of Indian railways. The exceptional
More informationSafety detection solutions
Presentation, actuator operated etal, types CS A, CS B, CS C and CS E Plastic, double insulated, turret head, types CS P or CS PA or CS TA and CS TE etal, types CS A, CS B, CS C, CS E with or without locking
More informationLOW VOLTAGE RING TYPE MEASURING CURRENT TRANSFORMERS
Specification for LOW VOLTAGE RING TYPE MEASURING CURRENT TRANSFORMERS CEYLON ELECTRICITY BOARD SRI LANKA Specification for LOW VOLTAGE RING TYPE MEASURING CURRENT TRANSFORMERS CEB Standard 027: 1998 CEYLON
More informationSCOPE OF WORK - SUBSTATION
SCOPE OF WORK - SUBSTATION VI - i TABLE OF CONTENTS 4.2 SCOPE OF WORK - SUBSTATIONS... 1 4.2.1 General... 1 4.2.2 Standard Substation... 2 4.2.3 33 kv Switchgear GIS Type... 2 4.2.3.1 Transformer Bay...
More information..OR How To Protect your 3-Phase Equipment Investment with 3-Phase Monitors from Time Mark...
..OR How To Protect your 3-Phase Equipment Investment with 3-Phase Monitors from Time Mark... TIME MARK CORPORATION 11440 EAST PINE STREET TULSA, OK 74116 USA tel 918 438-1220 fax 918 437-7584 www.time-mark.com
More informationWhat will MV switchgear look like in the future? by Jean-Marc Biasse
What will MV switchgear look like in the future? by Jean-Marc Biasse Table of contents Introduction... 2 Brief history of the technologies used in medium voltage switchgear and control gear... 4 Evolution
More informationThe Intelligent AX1 Switchgear for Medium Voltage
The Intelligent AX1 Switchgear for Medium Voltage Leif Lundin, Manager of Research and Development, Division Medium Voltage and Compact Substations, ABB Distribution, Sweden Abstract The newly launched
More informationCapacitor Protection Relay SPAJ 160 C. Product Guide
Issued: April 1999 Status: Updated Version: C/19.04.2006 Data subject to change without notice Features One-, two- and three-phase overload stage with definite time characteristic One-, two- and three-phase
More informationVECTOR ENERGY METERS FOR 11KV FEEDER METERS
TECHNICAL SPECIFICATION FOR 12 KV, 350 MVA, 1250/800A, 16 KA, MULTI PANEL (INCOMING, BUS- COUPLER AND OUTGOING) SHUNT TRIP, INDOOR TYPE SWITCHGEAR WITH MOTOR OPERATED SPRING CLOSING VACUUM CIRCUIT BREAKER
More informationBimetallic Overload Relay Specifications
Technical Data Bimetallic Overload Relay Specifications Bulletin Number 193K, 193T1 Topic Page Product Overview 2 Standards compliance and Certifications 2 General Specifications 193K 3 Approximate Dimensions
More informationSF 6 Gas Insulated Switchgear Type SDF for 170 kv
Three Phase Encapsulated Type SF 6 Gas Insulated Switchgear Type SDF for 170 kv 06B1-E-0001 With Trustworthy Technology, Structure Fuji Electric as a manufacturer of comprehensive substation equipment
More informationRotary Disconnect Switch Specifications
Technical Data Rotary Disconnect Switch Specifications Bulletin Number 194R Topic Page Product Line Overview 2 General Specifications Fuse Description 12 Approximate Dimensions 14 Additional Resources
More informationDCS Input/Output Relay Card Series
Input/Output Relay Card Series I/O RELAY CARD (with loopback test function) 8N The 8N series I/O Relay Cards easily and quickly standardize and facilitate installation of the relay board. Loopback test
More informationCirculating Current Relay. Type IRXm
Circulating Current Relay Type IRXm ABB a global technology leader ABB is a global leader in Power and Automation technologies that enable utility and industry customers to improve performance while lowering
More informationCAPACITOR BANK TESTING SWP
1. PURPOSE AND SCOPE The purpose of this Standard Work Practice (SWP) is to standardise and prescribe the method for testing Capacitor Banks including capacitors, tuning reactors and inrush limiting reactors.
More informationRemote Monitoring and REC 501 Control Unit Product Guide
Remote Monitoring and Control Unit REC 501 Product Guide Issued: May 1999 Status: Updated Version: B/06.11.2001 Data subject to change without notice Features Remote control and monitoring unit for the
More informationHERZ-Thermal Actuators
HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01
More informationLG Air Conditioning Multi F(DX) Fault Codes Sheet. Multi Split Units
Multi Split Units If there is a fault on any LG Multi unit, an Error mark is indicated on the display window of the indoor unit, wired-remote controller, and LED s of outdoor unit control board. A two
More information3AH5 Vacuum Circuit-Breakers. Answers for energy. Medium-Voltage Equipment Selection and Ordering Data. Catalog HG 11.05 2010
Medium-Voltage Equipment Selection and Ordering Data Catalog HG 11.05 2010 Answers for energy. R-HG11-172.tif 2 Siemens HG 11.05 2010 Contents Contents Page 3AH5 Vacuum Circuit-Breakers Medium-Voltage
More informationGE Power Controls. MiniFORM Switchboards
GE Power Controls MiniFORM Switchboards MiniFORM MiniFORM MiniFORM switchboards Arrangement Modules Arrangement modules 1-6 6 Arrangement modules 7-12 7 Arrangement modules 12-14 8 Arrangement modules
More informationSpare parts Catalogue
Technical catalogue Spare parts Catalogue Low voltage circuit-breakers Product support ABB SACE SDC0000D00 Not every original spare parts are really original spare parts. Availability of spare parts for
More informationEmergency stop As an emergency switching off/emergency stop device. Standards According to IEC/EN 60204-1, VDE 0113 Part 1
MainswitchSurfacemounting Partno. P3-63/I4/SVB Articleno. 207343 CatalogNo. SP3-063-I4CRQ IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual
More informationStep Voltage Regulators
Step Voltage Regulators Don Wareham Field Application Engineer Today s Agenda Introduction Voltage Regulator theory Voltage Regulator application considerations Installation and proper bypassing Wrap-up/questions
More informationPower Generation. Power Control PCL System Generator Set Control
Power Generation Power Control PCL System Generator Set Control Solid State Control The Power Control PCL system uses the latest solid state control technology. Designed for the budget-conscious installation
More informationMEDIUM AND HIGH VOLTAGE CAPACITORS, CAPACITOR BANKS AND SYSTEMS
MEDIUM AND HIGH VOLTAGE CAPACITORS, CAPACITOR BANKS AND SYSTEMS Meher Capacitors offers reliable and innovative products and solutions in the fields of Reactive Power Compensation, Power Quality and Energy
More informationSwitchgear Capabilities. NexGear is a Division of PowerSecure NASDAQ: POWR
Switchgear Capabilities NexGear is a Division of PowerSecure NASDAQ: POWR Discussion Points Introducing PowerSecure Introducing NexGear Solutions Offered Scope of Services Examples of Work Q & A NexGear,
More informationPower Meter Series 700
PowerLogic power-monitoring units Power Meter Series 700 Technical data sheet 2007 Functions and characteristics E90463 The PowerLogic Power Meter Series 700 offers all the measurement capabilities required
More informationOutdoor circuit breaker GVR Recloser Hawker Siddeley Switchgear. rated voltage 15, 27 and 38 kv rated current 630 A
Outdoor circuit breaker GVR Recloser Hawker Siddeley Switchgear rated voltage 15, 27 and 38 kv rated current 630 A Outdoor circuit breakers GVR Recloser GVR switchgear brings the reliability of modern
More informationSafety Relays ESM/ESM-F
Safety Relays ESM/ESM-F More than safety. Safety More than safety. Emil Euchner, the company s founder and inventor of the multiple limit switch, circa 1928. Around the world the Swabian specialists in
More informationCatalog January. Heavy industrial power applications Motor contactors and starters
Catalog January Heavy industrial power applications Motor contactors and starters 2006 General contents 0 Heavy Industrial Power Applications Motor Contactors and Starters 1 Contactors and Starters, Type
More informationEnhanced Quality with a Touch of Style
Rudolf Current Transformer Enhanced Quality with a Touch of Style Current Transformer Enhanced Quality with a Touch of Style New Products Rudolf launched our new encapsulated current transformer. Portraying
More informationCircuit Breaker. Description
Data Bulletin 0739DB9901R11/03 Cedar Rapids, Iowa, USA International Miniature Circuit Breakers with QO Plug-on and Bolt-on Connections Class Number 0739 Retain for future use. GENERAL DESCRIPTION The
More informationMerlin Gerin Multi 9 System Protection Miniature Circuit Breakers
Merlin Gerin Multi 9 System Protection Miniature Circuit Breakers Get more with the world s Power & Control specialist Protection Merlin Gerin Multi 9 System Miniature circuit breakers Tripping curves
More information