Technical Data FLIR A615 25

Transcription

1 Technical ata LIR 1 2 Part number: opyright 2013, LIR Systems, Inc. ll rights reserved worldwide. Names and marks appearing herein are either registered trademarks or trademarks of LIR Systems and/or its subsidiaries. ll other trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective owners. ebruary 19, 2013, 02:00 M orporate eadquarters LIR Systems, Inc. Imaging and optical data SW Parkway ve. Wilsonville, OR IR resolution 0 80 pixels US Thermal sensitivity/nt < +30 (+8 ) / 0 mk Telephone: Website ield of view (OV) / Minimum focus distance 2 x 19 (31 diagonal) / 0.2 m (0.82 ft.) ocal length 2. mm (0.97 in.) ustomer support Spatial resolution (IOV) 0.8 mrad Legal disclaimer Lens identification number 1.0 utomatic Specifications subject to change without further notice. Image frequency 0 z (100/200 z with windowing) amera models and accessories subject to regional market considerations. License procedures may apply. ocus utomatic or manual (built in motor) Information and equipment described herein may require US overnment authorization for export purposes. iversion contrary to US law is prohibited. etector data ocal Plane rray (P) / Spectral range Uncooled microbolometer / 7. 1 µm etector pitch 17 µm etector time constant Typical 8 ms Measurement Object temperature range ccuracy 0 to +10 ( 0 to +302 ) 100 to +0 (+212 to ) 300 to (+72 to +332 ) ±2 (±3. ) or ±2% of reading Measurement analysis tmospheric transmission correction Optics transmission correction missivity correction Variable from 0.01 to 1.0 Reflected apparent temperature correction xternal optics/windows correction Measurement corrections utomatic, based on inputs for distance, atmospheric temperature and relative humidity utomatic, based on signals from internal sensors utomatic, based on input of reflected temperature utomatic, based on input of optics/window transmission and temperature lobal object parameters _en_0.xml, ver. 1.2 Page 1 (of ) US US ontrol and image US, standard US 2 S US, connector type US Mini US, communication US, image streaming US, protocols TP/IP socketbased LIR proprietary 1bit z Signal linear Temperature linear Radiometric TP, UP, SNTP, RTSP, RTP, TTP, IMP, IMP, ftp, SMTP, SM (IS), P, MNS (onjour), upnp

2 LIR 1 2 P/N: thernet 2013, LIR Systems, Inc. thernet ontrol and image ll rights reserved worldwide. thernet, type igabit thernet thernet, standard I thernet, connector type thernet, communication thernet, image streaming thernet, protocols RJ TP/IP socketbased LIR proprietary and eniam protocol 1bit z 1bit z 1bit z Signal linear Temperature linear Radiometric ig Vision and eniam compatible TP, UP, SNTP, RTSP, RTP, TTP, IMP, IMP, ftp, SMTP, SM (IS), P, MNS (onjour), upnp igital input/output igital input, purpose igital input igital output, purpose igital output igital I/O, isolation voltage igital I/O, supply voltage igital I/O, connector type Image tag (start, stop, general), Image flow ctrl. (Stream on/off), Input ext. device (programmatically read) 2 optoisolated, V Output to ext. device (programmatically set) 2 optoisolated, V, max 100 m 00 VRMS 12/2 V, max 200 m pole jackable screw terminal Power system xternal power operation xternal power, connector type Voltage 12/2 V, 2 W absolute max 2pole jackable screw terminal llowed range V nvironmental data Operating temperature range Storage temperature range umidity (operating and storage) 1 to +0 (+ to +122 ) 0 to +70 ( 0 to +18 ) I /2 h 9% relative humidity +2 to +0 (+77 to +10 ) M N 10002:2001 (Immunity) N 10003:2001 (mission) 7 R Part 1 lass (mission) ncapsulation IP 30 (I 029) ump 2 g (I ) Vibration 2 g (I 0082) Physical data Weight 0.90 kg (1.98 lb.) amera size (L W ) mm ( in.) Tripod mounting UN ¼"20 (on three sides) ase mounting 2 M thread mounting holes (on three sides) ousing material luminum _en_0.xml, ver. 1.2 Page 2 (of ) omments to physical data Outline dimensional drawings and STP files can be found at

3 LIR 1 2 P/N: , LIR Systems, Inc. ll rights reserved worldwide. Shipping information Infrared camera with lens alibration certificate ardboard box ownloads brochure thernet cable LIR apps card LIR Tools download card etting Started uide Important Information uide Mains cable Optics brochure Power cable, pigtailed Power supply Printed Important Information uide Service & training brochure Thank you card US cable User documentation ROM Utility ROM Registration card _en_0.xml, ver. 1.2 Page 3 (of )

4 amera housing M 1x elicoil (x) 1in 2,mm 1,32in 33,mm UN 1/20 0,7x elicoil (3x) 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited. 2,93in ±0,00 7,mm ±0,1 1,in ±0,00 3,9mm ±0,1 1,in 3,mm 2,87in ±0,00 1,in 3,9mm 2mm ±0,1 (3x) 0,9in ±0,00 12mm ±0,1 (3x) 0,7in ±0,00 P active area at focus far (infinity) 7,97in ±0,0 203mm ±1 enomination heck rawn by +0,00 2,in 0,000 +0,1 7mm R& Thermography asic dimensions LIR /S xx 3 rawing No. T1292 1(9)

5 amera with Lens IR f=, mm (80 ),78in 121,mm 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited. 2,93in ±0,00 7,mm ±0,1 2,87in ±0,00 11,7in ±0,0 29,mm ±1 enomination heck,03in 13,1mm,in 11,mm,02in ±0,0 12,9mm ±1 rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 rawing No. T1292 2(9)

6 amera with Lens IR f=13,1 mm ( ) 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited. 2,93in ±0,00 7,mm ±0,1 2,87in ±0,00 8,8in ±0,0 22,mm ±1 enomination 3,19in 81mm heck 1,9in 9,3mm 3,19in ±0,0 81mm ±1 1,in 2,3mm rawn by 7mm ±0,1 2,in ±0, R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 rawing No. T1292 3(9)

7 amera with Lens IR f=2, mm (2 ) 1,in 0,8mm 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited. 2,93in ±0,00 7,mm ±0,1 2,87in ±0,00 8,in ±0,0 21mm ±1 enomination 2,8in 72,mm 2,8in ±0,0 72,mm ±1 heck 1,33in 33,8mm rawn by 7mm ±0,1 2,in ±0, R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 rawing No. T1292 (9)

8 amera with Lens IR f=1,3 mm (1 ) 1,83in,mm 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited. 2,93in ±0,00 7,mm ±0,1 2,87in ±0,00 8,73in ±0,0 221,8mm ±1 enomination 3,08in 78,2mm 3,08in ±0,0 78,2mm ±1 heck 1,in 39,mm rawn by 7mm ±0,1 2,in ±0, R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 rawing No. T1292 (9)

9 amera with Lens IR f=88,9 mm (7 ) incl support 3,78in 9mm 3,in 89mm 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.,29in ±0,01 109mm ±0,2 3,in ±0,01 90mm ±0,2 2,in ±0,01,9mm ±0,2 1,77in ±0,01 mm ±0,2 2,7in 70mm,03in 127,7mm UN 1/"20 0,7x elicoil (3x) ase support Optional Lens support Optional enomination 10,8in ±0,0 271mm ±1 heck rawn by,03in 127,7mm in ±0,0 127,7mm ± R& Thermography asic dimensions LIR /S xx 1,03in ±0,01 2,1mm ±0,3,9in ±0,00 12mm ±0,1 or additional dimensions see page 1 3 rawing No. T1292 (9)

10 amera with loseup lens 1,X (2 µm) 3,38in 8,9mm 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited. 2,93in ±0,00 7,mm ±0,1 2,87in ±0,00 10,28in ±0,0 21,2mm ±1 enomination heck,3in 117,mm 3,11in 78,9mm,3in ±0,0 117,mm ±1 rawn by R& Thermography asic dimensions LIR /S xx 2,in ±0,00 7mm ±0,1 or additional dimensions see page 1 3 rawing No. T1292 7(9)

11 amera with loseup lens 2,9X (0 µm) 1,2in 32mm 1,12in 28,mm loseup lens 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited. 2,93in ±0,00 7,mm ±0,1 2,87in ±0,00 IR Lens f=2, mm 9,3in ±0,0 2,mm ±1 enomination heck 3,98in 101mm 3,98in 101mm 2,72in 9,2mm 3,98in ±0,0 101mm ±1 rawn by 2,in 2,3mm R& Thermography asic dimensions LIR /S xx 2,in ±0,00 7mm ±0,1 loseup lens or additional dimensions see page 1 3 rawing No. T1292 8(9)

12 amera with loseup lens,8x (100 µm) 1,08in 27,mm 0,9in 2mm loseup lens 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited. 2,93in ±0,00 7,mm ±0,1 2,87in ±0,00 IR Lens f=2, mm 9,in ±0,0 239,9mm ±1 enomination heck 3,8in 9,mm 3,8in 9,mm 3,8 ±0,0 9, ±1 rawn by 2,in,8mm 2,27in 7,8mm R& Thermography asic dimensions LIR /S xx 2,in ±0,00 7mm ±0,1 loseup lens or additional dimensions see page 1 3 rawing No. T1292 9(9)