Technical Data FLIR A310

Transcription

1 Technical ata LIR 310 Part number: opyright 2013, LIR Systems, Inc. ll rights reserved worldwide. Names and marks appearing herein are either registered trademarks or trademarks of LIR Systems and/or its subsidiaries. ll other trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective owners. September 20, 2013, 0:2 M orporate eadquarters LIR Systems, Inc. 200 SW Parkway ve. Wilsonville, OR 900 US Telephone: Website Imaging and optical data IR resolution pixels Thermal sensitivity/nt < +30 (+8 ) / 0 mk ustomer support ield of view (OV) / Minimum focus distance / 0. m (1.31 ft.) Legal disclaimer Specifications subject to change without further notice. amera models and accessories subject to regional market considerations. License procedures may apply. Information and equipment described herein may require US overnment authorization for export purposes. iversion contrary to US law is prohibited. ocal length Spatial resolution (IOV) Lens identification number 1.3 Image frequency ocus Zoom 18 mm (0. in.) 1.3 mrad utomatic 30 z utomatic or manual (built in motor) 1 8 continuous, digital, interpolating zooming on images etector data ocal Plane rray (P) / Spectral range Uncooled microbolometer /. 13 µm etector pitch 2 µm etector time constant Typical 12 ms Measurement Object temperature range ccuracy 20 to +120 ( to +28 ) 0 to +30 (+32 to +2 ) ±2 (±3. ) or ±2% of reading Measurement analysis Spotmeter 10 rea Isotherm Measurement option ifference temperature Reference temperature tmospheric transmission correction Optics transmission correction 10 boxes with max./min./average/position 1 with above/below/interval missivity correction Variable from 0.01 to 1.0 Reflected apparent temperature correction xternal optics/windows correction Measurement corrections Measurement Mask ilter Schedule response: ile sending (ftp), (SMTP) elta temperature between measurement functions or reference temperature Manually set or captured from any measurement function utomatic, based on inputs for distance, atmospheric temperature and relative humidity utomatic, based on signals from internal sensors utomatic, based on input of reflected temperature utomatic, based on input of optics/window transmission and temperature lobal and individual object parameters larm _en_0.xml, ver. 1.2 Page 1 (of ) larm functions automatic alarms on any selected measurement function, igital In, amera temperature, timer

2 LIR 310 P/N: , LIR Systems, Inc. ll rights reserved worldwide. larm larm output igital Out, log, store image, file sending (ftp), (SMTP), notification Setup olor palettes Setup commands olor palettes (W, W inv, Iron, Rain) ate/time, Temperature / Storage of images Storage media ile formats uiltin memory for image storage Standard JP, 1bit measurement data included thernet thernet thernet, type ontrol, result and image 100 Mbps thernet, standard I thernet, connector type thernet, communication thernet, video streaming thernet, image streaming RJ TP/IP socketbased LIR proprietary MP, ISO/I 191 MP SP@L 1bit z Radiometric thernet, power Power over thernet, Po I 802.3af class 0 thernet, protocols thernet/ip, Modbus TP, TP, UP, SNTP, RTSP, RTP, TTP, IMP, IMP, ftp, SMTP, SM (IS), P, MNS (onjour), upnp igital input/output igital input, purpose igital input igital output, purpose igital output igital I/O, isolation voltage igital I/O, supply voltage igital I/O, connector type Image tag (start/stop/general), Input ext. device (programmatically read) 2 optoisolated, V s function of LRM, Output to ext. device (programmatically set) 2 optoisolated, V, max 100 m 00 VRMS 12/2 V, max 200 m pole jackable screw terminal omposite video Video out Video, standard omposite video output, PL and NTS compatible VS (ITURT.0 PL/SMPT 10M NTS) Power system xternal power operation xternal power, connector type Voltage 12/2 V, 2 W absolute max 2pole jackable screw terminal llowed range V nvironmental data Operating temperature range Storage temperature range umidity (operating and storage) 1 to +0 (+ to +122 ) 0 to +0 ( 0 to +18 ) I /2 h 9% relative humidity +2 to +0 (+ to +10 ) _en_0.xml, ver. 1.2 Page 2 (of ) M N 10002:2001 (Immunity) N 10003:2001 (mission) R Part 1 lass (mission) ncapsulation IP 0 (I 029) ump 2 g (I ) Vibration 2 g (I 0082)

3 LIR 310 P/N: , LIR Systems, Inc. ll rights reserved worldwide. Physical data Weight amera size (L W ) Tripod mounting ase mounting ousing material 0. kg (1. lb.) mm ( in.) UN ¼"20 (on three sides) 2 M thread mounting holes (on three sides) luminum Shipping information Infrared camera with lens alibration certificate ardboard box ownloads brochure thernet cable LIR apps card LIR Tools download card etting Started uide Important Information uide Mains cable Optics brochure Power cable, pigtailed Power supply Service & training brochure Thank you card User documentation ROM Utility ROM Registration card _en_0.xml, ver. 1.2 Page 3 (of )

4 amera with builtin IR lens f=18 mm (2 ) M (x) UN 1/20 (3x) 0,9in 2mm (3x) 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited. 0,in 0,11in 2,9mm 1,29in 32,mm (3x),1in 182mm,in 12mm enomination heck rawn by R& Thermography asic dimensions LIR 3xx/S3xx 3 rawing No. 1(8)

5 amera with Lens IR f= mm (90 ) incl support,in 118,1mm M (x) UN 1/"20 (3x) 0,9in 2mm (3x) 1,2in 1,3mm 0,in 10,1in 2,mm 3,3in 8,mm,in 12mm 3,2in 82,mm 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited. 8mm 2,8in 3,in 90,1mm Lens support Optional enomination heck rawn by 1,2in 1,3mm R& Thermography asic dimensions LIR 3xx/S3xx or additional dimensions see page 1 3 rawing No. 2(8)

6 amera with Lens IR f=10 mm ( ) 2,2in,mm M (x) UN 1/"20 (3x) 0,9in 2mm (3x) 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited. 0,in mm 1,8in 1,33in 3mm 1,1in 38,mm 8,3in 213mm,in 11mm enomination heck rawn by R& Thermography asic dimensions LIR 3xx/S3xx or additional dimensions see page 1 3 rawing No. 3(8)

7 amera with Lens IR f=30 mm (1 ) 2,0in 2,3mm (3x) M (x) UN 1/"20 (3x) 0,9in 2mm (3x) 0,in 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited. 8mm 2,28in 0,in 20mm 0,9in 2,3mm,82in 199mm,in 11mm enomination heck rawn by R& Thermography asic dimensions LIR 3xx/S3xx or additional dimensions see page 1 3 rawing No. (8)

8 amera with Lens IR f= mm ( ) incl support UN 1/"20 (x) 3,8in 88,mm 2,1in,3mm 1,in ±0,00 mm ±0,1 2,1in,mm 3,in ±0,00 90mm ±0,1 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited. 3,8in 9mm 1,89in 8mm (2x) Lens support Optional 3,98in 101,1mm ase support Optional,1in 10,8mm 11,03in 280mm,29in 109mm,in 12mm 1,89in 8mm enomination heck 2,1in,3mm rawn by,2in 108,mm R& Thermography asic dimensions LIR 3xx/S3xx 0,31in 8mm or additional dimensions see page 1 3 rawing No. (8)

9 amera with loseup lens 1X (2 µm) incl support Object plane 0,83in W = 21mm,in 19,8mm M (x) UN 1/"20 (3x) mm 2,1in 0,9in 2mm (3x) 1,2in 1,3mm 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited. 0,in 2,8in 8mm,38in 12mm,in 1,8mm Lens support Optional 13,3in 31mm,in 12mm enomination heck rawn by R& Thermography 3,2in 82,mm asic dimensions LIR 3xx/S3xx 1,2in 1,3mm or additional dimensions see page 1 3 rawing No. (8)

10 amera with loseup lens 2X (0 µm) Object plane 1,3in W = 33mm mm 2,9in 3,2mm (3x) M (x) UN 1/"20 (3x) 0,9in 2mm (3x) 0,in 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited. mm 2,1in 1,2in 30,mm 1,39in 3,2mm 8,2in 209,mm,in 12mm enomination heck rawn by R& Thermography asic dimensions LIR 3xx/S3xx or additional dimensions see page 1 3 rawing No. (8)

11 amera with loseup lens X (100 µm) M (x) 3,11in W = 9mm mm 2,9in 3,2mm (3x) UN 1/"20 (3x) Object plane 0,9in 2mm (3x) 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited. mm 2,1in 0,in 1,2in 30,mm 1,39in 3,2mm 8,2in 209,mm,in 12mm enomination heck rawn by R& Thermography asic dimensions LIR 3xx/S3xx or additional dimensions see page 1 3 rawing No. 8(8)