UMFT4222PROG FT4222 Programmer Module

Transcription

1 UMFTPROG FT Programmer Module Introduction The UMFTPROG FTH Programmer Module is used to program OTP memory on a UMFTEV or devices with a FTH. The internal OTP memory in the FTH is used to store USB Vendor ID (VID), Product ID (PID), device serial number, product description string and various other USB configuration descriptors. With this embedded OTP memory, the device can store vendor specific information and save the cost on BOM. The pin connector on the module connects directly to the FTDI UMFTEV. The UMFTPROG allows the user to program the UMFTEV OTP memory from a USB host controller.. Features USB.0 Full Speed compatible USB bus powered USB Type B micro connector for connecting to a PC USB Type A connector for connecting to a UMFTEV or a device with a FTH On board FTDI chip provides USB hub function Visual indicator for 6.5V programming voltage and USB bus power using LEDs Copyright Future Technology Devices International Limited

2 Applications UMFTEV OTP Memory programming OTP Memory programming on custom device with FTH. Driver Support Microsoft Windows 0 and 0-6-bit Microsoft Windows 8. and bit Microsoft Windows 8 and 8-6-bit Microsoft Windows 7 and Windows 7 6-bit The drivers listed above are all available to download for free from Ordering Information The following Error! Not a valid bookmark self-reference. gives details of the available UMFT Products. Part Number UMFTPROG Description FTH OTP memory programming module UMFTEV UMFTEV-B FTH evaluation module. FTH evaluation module with B version chip. Table - UMFT Products Descriptions and Part Numbers Copyright Future Technology Devices International Limited

3 Table of Contents Introduction.... Features... Applications.... Driver Support.... Ordering Information... Function Description.... Connection with UMFTEV Connection with Custom FTH design... 5 UMFTPROG module connection and Mechanical Details Module PCB Circuit Schematic Contact Information... 8 Appendix A - List of Figures and Tables... 9 Appendix B Revision History... 0 Copyright Future Technology Devices International Limited

4 Function Description The FTH Programmer Module (UMFTPROG) is designed to control power output (+6.5V) for programming the FTH OTP memory on the UMFTEV module or custom device with a FTH. This module is USB bus-powered and includes a USB.0 compliant full speed hub device. The power is provided from the USB upstream port. power is supplied through pins of the.5mm pitch header, JP. There are two USB connectors: ) CN: USB Type B micro receptacle to a PC, ) CN: USB Type A receptacle to a UMFTEV or custom FTH device. Having connected the UMFTPROG module, the user can perform the OTP memory programming with FT_PROG software. FT_PROG is a free programming utility for use with FTDI devices. For more details, please refer to the FTDI website. Figure - UMFTPROG connection example Copyright Future Technology Devices International Limited

5 . Connection with UMFTEV The UMFTEV module has a -pin ( populated at pin and positions),.5mm pitch male connector JP for connecting to the UMFTPROG JP. The details of connect configuration are listed below.. UMFTPROG JP Pin to UMFTPROG JP Pin. UMFTPROG JP Pin to UMFTPROG JP Pin. UMFTPROG CN to UMFTEV CN. UMFTPROG CN to PC To PC CN JP CN CN JP USB UMFTPROG Cable UMFTEV Figure - Example connection of UMFTPROG to UMFTEV. Connection with Custom FTH design Custom designs using the FTH hardware, should expose a and pin on the design PCB for OTP memory programming if required. The details of connect configuration are listed below.. UMFTPROG JP Pin to FTH Pin. UMFTPROG JP Pin to FTH Pin. UMFTPROG CN to FTH USB D+/D-. UMFTPROG CN to PC To PC CN CN JP UMFTPROG Figure - UMFTPROG to FTH Custom Device USB Cable FTH Custom Device Copyright Future Technology Devices International Limited 5

6 UMFTPROG module connection and Mechanical Details Figure -, shows the UMFTPROG module layout. The module is.8mm x.mm dimension..8mm.mm Figure - UMFTPROG module layout The following Table - shows the module signals for these signals on the UMFTPROG module. Pin No. Name Type Description JP- No Signal NA Not populated on PCB JP- No Signal NA Not populated on PCB JP- PWR Ground JP- PWR 6.5V Voltage supply Table - UMFTPROG module Connections (numbers refer to pad numbers on the PCB) The following Table - shows the USB Connector of UMFTPROG module. Connector No. Name Description CN USB upstream port, Micro-B type receptacle Connect to a PC USB downstream port, CN Connect to an UMFTEV evaluation board. Standard A type receptacle Table - UMFTPROG module USB Connectors Copyright Future Technology Devices International Limited 6

7 5 Module PCB Circuit Schematic The circuit schematics for the UMFTPROG board, are shown in Figure 5-. 0uF R.k % C0 70pF k % 0uF 0.uF 0nF 5 CII C8 R0 0. VCC TC R C9 C C 6 7 Ipk SWE D_SHOTKY 80R R8 70uH U MC06 8 DRC SWC D Power(+7.65V) L FT5A JP DBG FT5A-8 GPIO GPIO GPIO5 DEBUGGER AIO8 AIO9 AIO0 AIO AIO NC/RESET GPIO GPIO5 GPIO6 GPIO7 RST GPIO8 VCCIO GPIO9 GPIO0 GPIO GPIO DW_DP AIO5 AIO AIO TP UP_DP DW_DM 0 RST GPIO GPIO GPIO GPIO0 VREF VOUTV VCC5V AIO0 AIO AIO AIO 6 AIO 5 AIO5 AIO6 AIO7 UP_DM U VREF VOUTV _EN VOUTV FB VREF 600R/A C 0.uF TP Black R 7R R 7R R5 7R R6 7R UP_D_N UP_D_P DW_D_N DW_D_P VOUTV VOUTV C9 0.uF C0.7uF C 0.uF C 0.uF R9 0R (0.5W) _EN R 00K % R8 K R5 0K % Q U 8 IN 5 SHDN A 6 P LT0-ADJ IRLML50 OUT NC NC ADJ R 60R D Red C.7uF C R 0.uF k Upstream Port FB 600R/A C6 C C5.7uF 00nF 0nF CN D- D+ ID 5 CR CR C7 7pF UP_D_N UP_D_P C8 7pF CN MICRO x PGB R6 0K % C F R7 70R Pwr 0.5A D Green D SHOTKY R7 6R % 0nF JP HEADER Power to device board DP_ Downstream Port DW_D_N DW_D_P CN USB-A DM DP C6 C 50uF 0.uF C C5 7pF 7pF CR CR xpgb0060 Figure 5- Circuit Schematic of UMFTPROG Copyright Future Technology Devices International Limited 7

8 6 Contact Information Head Office Glasgow, UK Future Technology Devices International Limited Unit, Seaward Place, Centurion Business Park Glasgow G HH United Kingdom Tel: + (0) Fax: + (0) (Sales) (Support) (General Enquiries) Branch Office Taipei, Taiwan sales@ftdichip.com support@ftdichip.com admin@ftdichip.com Future Technology Devices International Limited (Taiwan) F, No. 56, Sec., NeiHu Road Taipei Taiwan, R.O.C. Tel: +886 (0) Fax: +886 (0) (Sales) (Support) (General Enquiries) tw.sales@ftdichip.com tw.support@ftdichip.com tw.admin@ftdichip.com Branch Office Tigard, Oregon, USA Future Technology Devices International Limited (USA) 70 SW Fir Loop Tigard, OR 97 USA Tel: + (50) Fax: + (50) (Sales) (Support) (General Enquiries) Branch Office Shanghai, China us.sales@ftdichip.com us.support@ftdichip.com us.admin@ftdichip.com Future Technology Devices International Limited (China) Room 0, No. 666 West Huaihai, Shanghai, 0005 China Tel: Fax: (Sales) (Support) (General Enquiries) cn.sales@ftdichip.com cn.support@ftdichip.com cn.admin@ftdichip.com Web Site System and equipment manufacturers and designers are responsible to ensure that their systems, and any Future Technology Devices International Ltd (FTDI) devices incorporated in their systems, meet all applicable safety, regulatory and system-level performance requirements. All application-related information in this document (including application descriptions, suggested FTDI devices and other materials) is provided for reference only. While FTDI has taken care to assure it is accurate, this information is subject to customer confirmation, and FTDI disclaims all liability for system designs and for any applications assistance provided by FTDI. Use of FTDI devices in life support and/or safety applications is entirely at the user s risk, and the user agrees to defend, indemnify and hold harmless FTDI from any and all damages, claims, suits or expense resulting from such use. This document is subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Neither the whole nor any part of the information contained in, or the product described in this document, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. Future Technology Devices International Ltd, Unit, Seaward Place, Centurion Business Park, Glasgow G HH, United Kingdom. Scotland Registered Company Number: SC660 Copyright Future Technology Devices International Limited 8

9 Appendix A - List of Figures and Tables List of Figures Figure - UMFTPROG connection example... Figure - Example connection of UMFTPROG to UMFTEV... 5 Figure - UMFTPROG to FTH Custom Device... 5 Figure - UMFTPROG module layout... 6 Figure 5- Circuit Schematic of UMFTPROG... 7 List of Tables Table - UMFTPROG module Connections (numbers refer to pad numbers on the PCB)... 6 Table - UMFTPROG module USB Connectors... 6 Copyright Future Technology Devices International Limited 9

10 Appendix B Revision History Document Title: FTH Programmer Module Document Reference No.: FT_00058 Clearance No.: FTDI# 08 Product Page: Document Feedback: DS_UMFTPROG Version.0 First Release Update to supported OS Copyright Future Technology Devices International Limited 0