02 STRUCTURAL EXTRUSIONS
|
|
|
- Daniel Barker
- 7 years ago
- Views:
Transcription
1 2 STRUCTURA EXTRUSIONS There are six 1 Series extrusions to choose from - 1"x1", 1"x1" QR, 1"x2", 1"x3", 2"x2" and 2"x4". The 1 Series TSOTS have.5" slot widths and are modular to each other. Accessories throughout this catalog allow you to build a complete structure with our 1 Series accessories and transition it to our Series. The 1 Series T-Slot design has an inside radius of.1" to make sliding drop-in T-Nuts easier. There are twelve Series extrusions to choose from 1.5"x1.5" to 3"x6". The Series TSOTS have.322" slot widths and are modular to each other. Accessories throughout this catalog allow you to build a complete structure with our Series accessories and transition it to and from our 1 Series. The Series T-Slot design has an inside radius of.187" to make sliding drop-in T-Nuts easier.» See the Technical Data section for specific aluminum information.
2 Structural Extrusions TS1-1 [ fractional ] Item Number: 65 The 1" x 1" extrusion is ideal for machine guarding, sound enclosures, small load work benches, display racks and panel mount racks. Mount accessories such as valves, sensors, switches, slatwall panels, DIN rails and many others direct to TSOTS. 2:2 SPECIICATIONS ength....' Weight lbs/ft (.816 kg/m) Estimated Area in 2 (2.948 cm 2 ) Moment of Inertia...Ix=.46 in 4 (1.9 cm 4 ) Iy=.46 in 4 (1.9 cm 4 ) BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
3 TS1-1 GR [ fractional ] Item Number: 657 The 1" x 1" extrusion is ideal for machine guarding, sound enclosures, small load work benches, display racks and panel mount racks. Mount accessories such as valves, sensors, switches, slatwall panels, DIN rails and many others direct to TSOTS. SPECIICATIONS ength....' Weight lbs/ft (.816 kg/m) Estimated Area in 2 (2.948 cm 2 ) Moment of Inertia...Ix=.46 in 4 (1.9 cm 4 ) Iy=.46 in 4 (1.9 cm 4 ) 2:3 BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
4 Structural Extrusions TS1-1QR [ fractional ] Item Number: 654 The 1." x 1." Quarter Round extrusion is ideal for machine guarding, sound enclosures, small load work benches, display racks and panel mount racks. Mount accessories such as valves, sensors, switches, slatwall panels, DIN rails and many others direct to TSOTS. Adds aesthetics to your design. 2:4 SPECIICATIONS ength....' Weight lbs/ft (.844 kg/m) Estimated Area in 2 (3.5 cm 2 ) Moment of Inertia...Ix=.4 in 4 (1.81 cm 4 ) Iy=.4 in 4 (1.81 cm 4 ) BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
5 TS1- [ fractional ] Item Number: 652 The 1" x 2" shape is designed for machine guarding, work benches, sound enclosures and mounting devices. The 1" x 2" shape can be used to run air lines or as a pressure or vacuum manifold. Other Industry Standard and custom extruded shapes available upon request. SPECIICATIONS ength....' Weight lbs/ft (1.472 kg/m) Estimated Area in 2 (5.316 cm 2 ) Moment of Inertia... Ix=.87 in 4 (3.621 cm 4 ) Iy=.321 in 4 ( cm 4 ) 2:5 BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
6 Structural Extrusions TS1- GR [ fractional ] Item Number: 6571 The 1" x 2" shape is designed for machine guarding, work benches, sound enclosures and mounting devices. The 1" x 2" shape can be used to run air lines or as a pressure or vacuum manifold. Other Industry Standard and custom extruded shapes available upon request. 2:6 SPECIICATIONS ength....' Weight lbs/ft (1.472 kg/m) Estimated Area in 2 (5.316 cm 2 ) Moment of Inertia... Ix=.87 in 4 (3.621 cm 4 ) Iy=.321 in 4 ( cm 4 ) BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
7 TS1- [ fractional ] Item Number: 651 The 1" x 3" shape is designed for machine guarding, work benches, sound enclosures and mounting devices. The 1" x 3" shape can be used to run air lines or as a pressure or vacuum manifold. Other Industry Standard and custom extruded shapes available upon request. SPECIICATIONS ength....' Weight lbs/ft (2.87 kg/m) Estimated Area in 2 (7.86 cm 2 ) Moment of Inertia... Ix=.1 in 4 (5.2 cm 4 ) Iy=.986 in 4 (41.4 cm 4 ) 2:7 BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
8 Structural Extrusions TS1-1 MONOSOT [ fractional ] Item Number: 656 2:8 1. [].5 [13].6 [].26 [6].5 [13] 1. [].31 [8] Ø. [Ø 5] The 1" x 1" MOS shape was designed for light weight and strength requirements where additional cleanliness and aesthetics is needed. Applications include machine guarding, sound enclosures, tables and display racks. SPECIICATIONS ength....' Weight lbs/ft (.948 kg/m) Estimated Area in 2 (3.426 cm 2 ) Moment of Inertia...Ix=.51 in 4 (2.136 cm 4 ) Iy=.57 in 4 (2.371 cm 4 ) BEAM SEECTION BY OAD AND ENGTH Concentrated Center Simp Supported Uniform Distributed oad Simp Supported 6 2 OAD BS. OAD BS ENGTH IN. ENGTH IN. Concentrated ree End Cantilevered Uniform Distributed oad Cantilevered OAD BS. OAD BS ENGTH IN. ENGTH IN.» or deflection equations see page 1:4.
9 TS1-1 BISOT AD [ fractional ] Item Number: [].5 [13].6 [].26 [6].5 [13] 1. [].31 [8] Ø. [Ø 5] The 1" x 1" BAS shape was designed for light weight and strength requirements where additional cleanliness and aesthetics is needed. Applications include machine guarding, sound enclosures, tables and display racks. SPECIICATIONS ength....' Weight lbs/ft (.9 kg/m) Estimated Area in 2 (3.3 cm 2 ) Moment of Inertia...Ix=.51 in 4 (2.136 cm 4 ) Iy=.51 in 4 (2.136 cm 4 ) 2:9 BEAM SEECTION BY OAD AND ENGTH Concentrated Center Simp Supported Uniform Distributed oad Simp Supported OAD BS. 1 OAD BS ENGTH IN. ENGTH IN. Concentrated ree End Cantilevered Uniform Distributed oad Cantilevered OAD BS. OAD BS ENGTH IN. ENGTH IN.» or deflection equations see page 1:4.
10 Structural Extrusions TS1-1 BISOT OPP [ fractional ] Item Number: :1 1. [].5 [13].5 [13].6 [].26 [6] 1. [].31 [8] Ø. [Ø 5] The 1" x 1" BOS shape was designed for light weight and strength requirements where additional cleanliness and aesthetics is needed. Applications include machine guarding, sound enclosures, tables and display racks. SPECIICATIONS ength....' Weight lbs/ft (.9 kg/m) Estimated Area in 2 (3.3 cm 2 ) Moment of Inertia...Ix=.46 in 4 (1.913 cm 4 ) Iy=.57 in 4 (2.371 cm 4 ) BEAM SEECTION BY OAD AND ENGTH Concentrated Center Simp Supported Uniform Distributed oad Simp Supported 6 2 OAD BS. OAD BS ENGTH IN. ENGTH IN. Concentrated ree End Cantilevered Uniform Distributed oad Cantilevered OAD BS. OAD BS ENGTH IN. ENGTH IN.» or deflection equations see page 1:4.
11 TS1-1 TRISOT [ fractional ] Item Number: [].5 [13].5 [13].6 [].26 [6] 1. [].31 [8] Ø. [Ø 5] The 1" x 1" TRS shape was designed for light weight and strength requirements where additional cleanliness and aesthetics is needed. Applications include machine guarding, sound enclosures, tables and display racks. SPECIICATIONS ength....' Weight lbs/ft (.851 kg/m) Estimated Area in 2 (3.8 cm 2 ) Moment of Inertia...Ix=.46 in 4 (1.92 cm 4 ) Iy=.51 in 4 (2.112 cm 4 ) 2:11 BEAM SEECTION BY OAD AND ENGTH Concentrated Center Simp Supported Uniform Distributed oad Simp Supported OAD BS. 1 OAD BS ENGTH IN. ENGTH IN. Concentrated ree End Cantilevered Uniform Distributed oad Cantilevered OAD BS. OAD BS ENGTH IN. ENGTH IN.» or deflection equations see page 1:4.
12 Structural Extrusions TS- [ fractional ] Item Number: 653 The 2" x 2" extrusion is ideal for structures where more strength is needed for smaller frame assemblies. The center of the 2" x 2" can be used to run air lines or serve as a pressure or vacuum manifold up to p.s.i. The 2" x 2" TSOTS extrusion accepts 1 Series fasteners, accessories and stanchions. 2:12 SPECIICATIONS ength....' Weight lbs/ft (2.295 kg/m) Estimated Area in 2 (8.29 cm 2 ) Moment of Inertia...Ix=.578 in 4 (24.58 cm 4 ) Iy=.578 in 4 (24.58 cm 4 ) BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
13 TS- GR [ fractional ] Item Number: 6572 The 2" x 2" extrusion is ideal for structures where more strength is needed for smaller frame assemblies. The center of the 2" x 2" can be used to run air lines or serve as a pressure or vacuum manifold up to p.s.i. The 2" x 2" TSOTS extrusion accepts 1 Series fasteners, accessories and stanchions. SPECIICATIONS ength....' Weight lbs/ft (2.295 kg/m) Estimated Area in 2 (8.29 cm 2 ) Moment of Inertia...Ix=.578 in 4 (24.58 cm 4 ) Iy=.578 in 4 (24.58 cm 4 ) 2:13 BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
14 Structural Extrusions TS-4 [ fractional ] Item Number: 654 Our 2" x 4" shape is the largest 1 S shape available. It was created for structures that require very high load requirements. The 2" x 4" shape is ideal for heavy duty machine bases, support structures, stairways, mezzanines and anywhere where maximum structural strength is needed. The 2" x 4" shape also has four hollow centers that will accomodate multiple air manifolds. Pressure up to p.s.i. 2:14 SPECIICATIONS ength....' Weight lbs/ft (4.195 kg/m) Estimated Area in 2 (.7 cm 2 ) Moment of Inertia...Ix=1.75 in 4 ( cm 4 ) Iy=3.656 in 4 (2.174 cm 4 ) BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
15 TS -75 [ fractional ] Item Number: 657 Ø.7 [Ø5] 1.5 [38].81 [].32 [8] The 1.5" x 1.5" extrusion can be used as a door rail or a support for clamps, valves, etc. It can also be used as a handrail..75 [19]. [6].16 [4] 1. [].48 [12] Ø.262 [Ø7] SPECIICATIONS ength....12' Weight lbs/ft (1.238 kg/m) Estimated Area in 2 (4.476 cm 2 ) Moment of Inertia...Ix=.37 in 4 (1.522 cm 4 ) Iy=.147 in 4 (6.114 cm 4 ) 2: BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
![[].48 [12] Ø.262 [Ø7] SPECIICATIONS ength....12' Weight....8328 lbs/ft (1.238 kg/m) Estimated Area............................694 in 2 (4.](/docs-images/46/21766634/images/page_15.jpg "476 cm 2 ) Moment of Inertia...Ix=.37 in 4 (1.522 cm 4 )...................................... Iy=.147 in 4 (6.")
16 Structural Extrusions TS- [ fractional ] Item Number: 655 The 1.5" x 1.5" shape has a thicker wall that will accommodate heavier applications than the 1.5" x 1.5". Applications include machine frames, workstations, shop carts, tables and machine retrofits. 2:16 SPECIICATIONS ength....' Weight lbs/ft (2.14 kg/m) Estimated Area in 2 (7.729 cm 2 ) Moment of Inertia...Ix=.266 in 4 (11.72 cm 4 ) Iy=.266 in 4 (11.72 cm 4 ) BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
17 TS- GR [ fractional ] Item Number: 658 The 1.5" x 1.5" shape has a thicker wall that will accommodate heavier applications than the 1.5" x 1.5". Applications include machine frames, workstations, shop carts, tables and machine retrofits. SPECIICATIONS ength....' Weight lbs/ft (2.14 kg/m) Estimated Area in 2 (7.729 cm 2 ) Moment of Inertia...Ix=.266 in 4 (11.72 cm 4 ) Iy=.266 in 4 (11.72 cm 4 ) 2:17 BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
18 Structural Extrusions TS- [ fractional ] Item Number: [21] The 1.5" x 1.5" shape was designed for lighter weight and strength requirements than our 1.5" x 1.5". Applications include lighter load bearing structures, guarding and light weight frames. 2:18 SPECIICATIONS ength....' Weight lbs/ft (1.652 kg/m) Estimated Area in 2 (5.968 cm 2 ) Moment of Inertia...Ix=.194 in 4 (8.75 cm 4 ) Iy=.194 in 4 (8.75 cm 4 ) BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
19 TS- GR [ fractional ] Item Number: [21] The 1.5" x 1.5" shape was designed for lighter weight and strength requirements than our 1.5" x 1.5". Applications include lighter load bearing structures, guarding and light weight frames. SPECIICATIONS ength....' Weight lbs/ft (1.652 kg/m) Estimated Area in 2 (5.968 cm 2 ) Moment of Inertia...Ix=.194 in 4 (8.75 cm 4 ) Iy=.194 in 4 (8.75 cm 4 ) 2:19 BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
20 Structural Extrusions TS-V [ fractional ] Item Number: [21] The 1.5" x 1.5" V shape was designed for lighter weight and strength requirements than our 1.5" x 1.5". Applications include light load bearing structures, guarding and light weight frames. 2: SPECIICATIONS ength....' Weight....9 lbs/ft (1.377 kg/m) Estimated Area in 2 (4.972 cm 2 ) Moment of Inertia...Ix=.172 in 4 (7.9 cm 4 ) Iy=.172 in 4 (7.9 cm 4 ) BEAM SEECTION BY OAD AND ENGTH Concentrated Center Simp Supported Uniform Distributed oad Simp Supported OAD BS. 1 OAD BS ENGTH IN. ENGTH IN. Concentrated ree End Cantilevered Uniform Distributed oad Cantilevered 113 OAD BS. 75 OAD BS ENGTH IN. ENGTH IN.» or deflection equations see page 1:4.
21 TS-V GR [ fractional ] Item Number: [21] The 1.5" x 1.5" V shape was designed for lighter weight and strength requirements than our 1.5" x 1.5". Applications include light load bearing structures, guarding and light weight frames. SPECIICATIONS ength....' Weight....9 lbs/ft (1.377 kg/m) Estimated Area in 2 (4.972 cm 2 ) Moment of Inertia...Ix=.172 in 4 (7.9 cm 4 ) Iy=.172 in 4 (7.9 cm 4 ) 2:21 BEAM SEECTION BY OAD AND ENGTH Concentrated Center Simp Supported Uniform Distributed oad Simp Supported OAD BS. 1 OAD BS ENGTH IN. ENGTH IN. Concentrated ree End Cantilevered Uniform Distributed oad Cantilevered 113 OAD BS. 75 OAD BS ENGTH IN. ENGTH IN.» or deflection equations see page 1:4.
22 Structural Extrusions TS- MONOSOT [ fractional ] Item Number: 6514 The 1.5" x 1.5"MOS shape was designed for lighter weight and strength requirements where additional cleanliness and aesthetics is needed. Applications include machine enclosures, guarding and light weight frames. 2:22 SPECIICATIONS ength....' Weight lbs/ft (1.51 kg/m) Estimated Area in 2 (5.6 cm 2 ) Moment of Inertia...Ix=.178 in 4 (7.48 cm 4 ) Iy=.18 in 4 (7.492 cm 4 ) BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
23 TS- BISOT AD [ fractional ] Item Number: 65 The 1.5" x 1.5"BAS shape was designed for lighter weight and strength requirements where additional cleanliness and aesthetics is needed. Applications include machine enclosures, guarding and light weight frames. SPECIICATIONS ength....' Weight lbs/ft (1.541 kg/m) Estimated Area in 2 (5.566 cm 2 ) Moment of Inertia...Ix=.181 in 4 (7.533 cm 4 ) Iy=.181 in 4 (7.533 cm 4 ) 2:23 BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
24 Structural Extrusions TS- BISOT OPP [ fractional ] Item Number: 6516 The 1.5" x 1.5"BOS shape was designed for lighter weight and strength requirements where additional cleanliness and aesthetics is needed. Applications include machine enclosures, guarding and light weight frames. 2:24 SPECIICATIONS ength....' Weight lbs/ft (1.499 kg/m) Estimated Area in 2 (5.418 cm 2 ) Moment of Inertia...Ix=.172 in 4 (7.9 cm 4 ) Iy=.176 in 4 (7.3 cm 4 ) BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
25 TS- TRISOT [ fractional ] Item Number: 6517 The 1.5" x 1.5"TRS shape was designed for lighter weight and strength requirements where additional cleanliness and aesthetics is needed. Applications include machine enclosures, guarding and light weight frames. SPECIICATIONS ength....' Weight lbs/ft (1.568 kg/m) Estimated Area in 2 (5.663 cm 2 ) Moment of Inertia...Ix=.181 in 4 (7.533 cm 4 ) Iy=.183 in 4 (7.617 cm 4 ) 2: BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
26 Structural Extrusions TS-QR [ fractional ] Item Number: 6541 Our 1.5" x 1.5" Quarter Round was designed for lighter weight and strength requirements than our 1.5" x 1.5". Applications include lighter load bearing structures, light weight frames, machine guarding, sound enclosures, small load work benches, display racks and panel mount racks. Adds aesthetics to your design. 2:26 SPECIICATIONS ength....' Weight lbs/ft (1.57 kg/m) Estimated Area in 2 (5.67 cm 2 ) Moment of Inertia...Ix=.172 in 4 (7.16 cm 4 ) Iy=.172 in 4 (7.16 cm 4 ) BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
27 TS- [ fractional ] Item Number: 658 The 1.5" x 3." shape is designed for larger and heavier structures where strength is required. Applications for 1.5"x3." include framing systems, roller conveyor systems, fixturing, specialty machines, supports, linear slides and automated assemb systems. This shape can be used to run air lines or as a pressure or vacuum manifold up to p.s.i. SPECIICATIONS ength....' Weight lbs/ft (3.848 kg/m) Estimated Area in 2 (13.93 cm 2 ) Moment of Inertia...Ix=.52 in 4 (.895 cm 4 ) Iy=1.877 in 4 ( cm 4 ) 2:27 BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
28 Structural Extrusions TS- GR [ fractional ] Item Number: 6582 The 1.5" x 3." shape is designed for larger and heavier structures where strength is required. Applications for 1.5"x3." include framing systems, roller conveyor systems, fixturing, specialty machines, supports, linear slides and automated assemb systems. This shape can be used to run air lines or as a pressure or vacuum manifold up to p.s.i. 2:28 SPECIICATIONS ength....' Weight lbs/ft (3.848 kg/m) Estimated Area in 2 (13.93 cm 2 ) Moment of Inertia...Ix=.52 in 4 (.895 cm 4 ) Iy=1.877 in 4 ( cm 4 ) BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
29 TS- [ fractional ] Item Number: 659 The 1.5" x 3." shape is designed for larger structures where strength is not critical. Applications for 1.5" x 3." include framing and door tracks. This shape can be used to run air lines or as a pressure or vacuum manifold up to p.s.i. SPECIICATIONS ength....' Weight lbs/ft (3.3 kg/m) Estimated Area in 2 ( cm 2 ) Moment of Inertia...Ix=.48 in 4 ( cm 4 ) Iy=1.431 in 4 ( cm 4 ) 2:29 BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
30 Structural Extrusions TS- GR [ fractional ] Item Number: 6547 The 1.5" x 3." shape is designed for larger structures where strength is not critical. Applications for 1.5" x 3." include framing and door tracks. This shape can be used to run air lines or as a pressure or vacuum manifold up to p.s.i. 2: SPECIICATIONS ength....' Weight lbs/ft (3.3 kg/m) Estimated Area in 2 ( cm 2 ) Moment of Inertia...Ix=.48 in 4 ( cm 4 ) Iy=1.431 in 4 ( cm 4 ) BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
31 TS- [ fractional ] Item Number: 651 The 1.5" x 4.5" shape is ideal for applications where long lengths without supporting structures are needed. Use the 1.5" x 4.5" in conveyor systems, linear motion, material handling and large machine frames. The two hollow centers are good for dual air manifolds up to p.s.i. SPECIICATIONS ength....' Weight lbs/ft (5.566 kg/m) Estimated Area in 2 (.84 cm 2 ) Moment of Inertia...Ix=.739 in 4 (.76 cm 4 ) Iy=5.913 in 4 ( cm 4 ) 2:31 BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
32 Structural Extrusions TS- [ fractional ] Item Number: [19] Our 3" x 3" shape has a thicker wall and is designed for heavier and stronger structures where strength is critical. This shape can be used to run air lines or as a pressure or vacuum manifold up to p.s.i. 2:32 SPECIICATIONS ength....' Weight lbs/ft (5.993 kg/m) Estimated Area in 2 ( cm 2 ) Moment of Inertia...Ix=3.379 in 4 (14.6 cm 4 ) Iy=3.379 in 4 (14.6 cm 4 ) BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
33 TS- GR [ fractional ] Item Number: [19] Our 3" x 3" shape has a thicker wall and is designed for heavier and stronger structures where strength is critical. This shape can be used to run air lines or as a pressure or vacuum manifold up to p.s.i. SPECIICATIONS ength....' Weight lbs/ft (5.993 kg/m) Estimated Area in 2 ( cm 2 ) Moment of Inertia...Ix=3.379 in 4 (14.6 cm 4 ) Iy=3.379 in 4 (14.6 cm 4 ) 2:33 BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
34 Structural Extrusions TS-GR [ fractional ] Item Number: [19] Our 3" x 3" GR shape has thinner walls than our 3" x 3" shape. It is designed for guarding and structures where the larger profile is needed but the strength requirements are not as large. 2:34 SPECIICATIONS ength....' Weight lbs/ft (4.873 kg/m) Estimated Area in 2 ( cm 2 ) Moment of Inertia...Ix=2.639 in 4 ( cm 4 ) Iy=2.639 in 4 ( cm 4 ) BEAM SEECTION BY OAD AND ENGTH Concentrated Center Simp Supported Uniform Distributed oad Simp Supported OAD BS. OAD BS ENGTH IN. ENGTH IN. Concentrated ree End Cantilevered Uniform Distributed oad Cantilevered 1 9 OAD BS. 6 OAD BS ENGTH IN. ENGTH IN.» or deflection equations see page 1:4.
35 TS-6 [ fractional ] Item Number: [76] 1.5 [38] 1.5 [38].75 [19] 6. [2] 8X Ø.26 [Ø6.53].32 [8].8 [] Our 3" x 6" shape is the largest shape available. It was created for structures that require very high load requirements. The 3" x 6" shape is ideal for heavy duty machine bases, support structures, stairways, mezzanines and anywhere where maximum structural strength is needed. The 3" x 6" shape also has four hollow centers that will accomodate multiple air manifolds. Pressure up to p.s.i. SPECIICATIONS ength....14' Weight lbs/ft (11.15 kg/m) Estimated Area in 2 (4.123 cm 2 ) Moment of Inertia...Ix=6.4 in 4 ( cm 4 ) Iy= in 4 ( cm 4 ) * lengths available in custom runs. 2: BEAM SEECTION BY OAD AND ENGTH» or deflection equations see page 1:4.
T-Slotted Extrusions and Quick Frame
T-Slotted Extrusions and Quick Frame How to Order Introduction to Section 1 Material Specifications Material Strength Area of 80/20 T-Slotted Extrusions Fastener Application Tests Drop Lock & Torque Specifications
Section #1 Pictorial Table Of Contents. Material Strength. 25-2503 Profile. Page 662. Page 663. Phone: 260-248-8030 Fax: 260-248-8029 www.8020.
How To Order 20-2020 Profile Section # Pictorial Table Of Contents Metric Part Naming Metric Page 639 Page 64 Page 642 Page 643 Page 644 Page 645 Pages 646-649 20 Series T-Slotted Aluminum Profiles 20-2040
by 80/20 Supplement I 80/20 Inc. the home of The Industrial Erector Set EXPANDED VERSION! www.tslotparts.com
Supplement I by 80/20 80/20 Inc. the home of The Industrial Erector Set www.tslotparts.com EXPANDED VERSION! 80/20 is your one-stop shop for all aluminum T-slot profiles, parts and accessories. Check out
ECLIPSE THE ULTIMATE MULTI-PURPOSE SHELVING SYSTEM. UP TO 360kg SHELF CAPACITY QUICK & EASY BOLT-FREE ASSEMBLY STRONG, ROBUST & MODERN DESIGN DESIGN
ECLIPSE CHROME WIRE SHELVING ECLIPSE THE ULTIMATE MULTI-PURPOSE SHELVING SYSTEM UP TO 360kg SHELF CAPACITY QUICK & EASY BOLT-FREE ASSEMBLY STRONG, ROBUST & MODERN DESIGN A S S E M B LY Fully Adjustable
AUTOMATION TOOLING CATALOG ENGINEERING DATA & COMPONENT SELECTION CATALOG # 62612
AUTOMATION TOOLING CATALOG ENGINEERING DATA & COMPONENT SELECTION CATALOG # 62612 Len & Jerry's specializes in finding solutions to reduce: Weight deflection/vibration frequency cost Problems found frequently
2200 SERIES COMMON DRIVE PACKAGE Special Capabilities Specification Sheet
975 Cottonwood Ave., PO Box 20, Hartland, Wisconsin 53029-0020, USA www.dorner.com info@dorner.com COMMON DRIVE CONVEYOR SETUP Up to (4) conveyors can be coupled together and driven from a single gearmotor.
Section #13 Pictorial Table Of Contents. The Caster. Top & Bottom Shelves. Pages 617-623 Page 624 Page 625 Pages 626-628 Pages 629-633
AQX Introduction Section # Pictorial Table Of Contents Completed Shop Cart Step-by-Step Tutorial The Caster The Leg Fractional The Lower Cross Member Machining w/ Access Holes AutoQuoterX Page 610 Page
Alpha System ADAPTABLE KEWAUNEE LABORATORY FURNITURE. encouraging new discovery
Alpha System ADAPTABLE LABORATORY FURNITURE KEWAUNEE encouraging new discovery Alpha 6 partition modules with Kemresin worktops. Minneapolis, Minnesota Alpha 6 partition modules with Alpha overhead service
PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
1500 Follow Spot Yoke
= 1500 Follow Spot Yoke Rev 1.1 2004 City Theatrical, Inc. Getting Started with the City Theatrical Follow Spot Yoke Congratulations on the purchase of your City Theatrical Follow Spot Yoke. The City Theatrical
More than shelving & racking. All for your storage demands.
More than shelving & racking. All for your storage demands. CONTENTS SELECTIVE PALLET RACKING A cost effective storage system providing direct access to all pallet. SLOTTED ANGLE SHELVING Simple, cost-effective
SMALLER SBD15-60 SIZE NEW NOW AVAILABLE. HepcoMotion. SBD Sealed Belt Drive
NEW SMALLER SD15-60 SIZE NOW AVAILALE HepcoMotion SD Sealed elt Drive For amendments and updates visit www.hepcomotion.com and select literature button Introduction The HepcoMotion SD is an exceptionally
Knürr Smaract. Knürr Smaract. CompactRack
CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.
The Back Saver. Ergonomic Lifting Guide For Roll Handling
The Back Saver Ergonomic Lifting Guide For Roll Handling Since 1990, Alum-a-lift has conceived, designed, developed and manufactured ergonomic lifting devices; Devices to lift, lower, move, position and
Aluminium systems profile selection
Aluminium systems profile selection The purpose of this document is to summarise the way that aluminium profile selection should be made, based on the strength requirements for each application. Curtain
Valu Guide Sheaths. Valu Guide Inserts. Optional Valu Guide Inserts. Typical Properties of Valu Guide Rail. and Hardware.
14 gauge stainless steel The Original, Long Life Sanitary Guide Rail Valu Guide rail incorporates two outstanding materials: stainless steel and UHMW. The 14 ga. stainless steel sheath provides rigid streamlined
www.comoso.com Dimensions and technical information are subject to change without notice.
www.comoso.com Modular Precision Link Conveyors 161 Features: CMCO Modular Table Top Precision Link Conveyors are ideal for linear transfer applications with features including: Modular frame design in
mechanics PP-Profiles Panel Profiles PT-Profiles T-Groove Plates RE-Profiles Rectangular Profiles PU-Profiles Universal Profiles
Overview PP-Profiles Panel Profiles PP 50 PP 100 PP 150 PP 200 PP 0 B 4 PT-Profiles T-Groove Plates B 5 PT PT 50 RE-Profiles Rectangular Profiles B 6 RE 15 RE 30 RE40 RE65 PU-Profiles Universal Profiles
Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
Knürr DCM. Knürr DCM. 19 Server Rack System 19 Heavy Duty Rack 1.2 to 1.9 1.1
Knürr DCM 19 Server Rack System 19 Heavy Duty Rack 1.2 to 1.9 1.1 Knürr DCM conquers the world Standardization in the data center begins with the Knürr DCM! The Knürr DCM is the modular building block
MEGA GUARD COLUMN CORE GUARD DAWG COLUMN PROTECTOR. Smart Investments in Plant Safety
MEGA GUARD COLUMN CORE GUARD DAWG COLUMN PROTECTOR Smart Investments in Plant Safety TM Solid Steel Protection Steel King is committed to making your workplace safer. Our current products exceed industry
Features IMC Precision Link Conveyors are ideal for linear transfer applications with features including:
Features IMC Precision Link Conveyors are ideal for linear transfer applications with features including: Table Top or Heavy Duty versions Precision positioning of parts for assembly or manufacturing processes
Linear Motion & Assembly Technologies - Guarding System
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Linear Motion & Assembly Technologies - Guarding System EcoSafe Guarding System from Rexroth Guarding
TBG-25 OPTIONS X AXIS TRAVEL (MM) Z AXIS TRAVEL (MM) OPTIONS FOR: SPECIFICATIONS. Specifications. Configuration. Belt Type 25.
LINEAR ROBOTICS > T-BOT GANTRY ROBOTS T-BOT GANTRY ROBOTS TBG-25 OPTIONS X AXIS TRAVEL (MM) 500 1000 2000 Custom Z AXIS TRAVEL (MM) 250 500 Custom Controls Motor Gearbox HOW TO BUILD YOUR TBG-25: Features
2200 & 2300 SERIES CONVEYORS
2200 & 200 SERIES CONVEYORS FEATURES & BENEFITS CONVEYOR ORDERING INFORMATION 2200/200 SERIES LOW PROFILE BELT CONVEYORS EXTRUDED ALUMINUM 2200 Series 200 Series General Specifications: idrive, Flat Belt
IMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
Shape Ape. Low- Cost Cubing and Dimensioning
Shape Ape Low- Cost Cubing and Dimensioning 2 Warehousing & Distribution Shape Ape is a complete and low- cost solution for accurately dimensioning items and packages in warehouse, transportation, and
Structural system XC. System information X45 X65 X65P X85 X85P XKP X180 X300 ELV CTL FST APX IDX. Contents. T-slot dimensions.
Structural system XC Contents System information...417 Beams XC...41 Beam accessories XC...421 Connectors XC...4 Feet XC...427 System information Enclosure components XC...431 Enclosure components XC conduit
22.302 Experiment 5. Strain Gage Measurements
22.302 Experiment 5 Strain Gage Measurements Introduction The design of components for many engineering systems is based on the application of theoretical models. The accuracy of these models can be verified
19" GERMANY EXPORT RACK QUALITY PRODUCT FOR THE BEST WORK NEW DESIGN CABLE MANAGEMENT PANEL WALL RACK CABINET 15 U VENTILATING FAN
NEW DESIGN CABLE MANAGEMENT PANEL WALL RACK CABINET 15 U VENTILATING FAN AC SOCKET STRIP (AC Power Distribution) BLANK PANELS x U OPEN RACK THERMOSTAD PANEL SET CABLE MANAGEMENT PANEL WITH COVER BAYING
screens U N D E R S TA N D I N G S C R E E N S...9 0 PA N E L WA L L A D D - O N S C R E E N B A S I C S...9 3
U N D E R S TA N D I N G S C R E E N S...........................9 0 PA N E L WA L L A D D - O N S C R E E N B A S I C S...................9 3 P L A N N I N G W I T H A D D - O N S C R E E N S.....................9
Architectural Specifications MODEL HDXL 9. 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8
MODEL HDXL 9 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HDXL 9 Tech Specs September 4, 2012
Model RC Armature-Slot- Insulation Folder
Model RC Armature-Slot- Insulation Folder 21 Model RC will handle insulation material up to 8 wide between its guides. Creasing rollers are adjustable sideways to make troughs up to 6 wide. A fixed ruler-guide
Automatic Sliding Door Systems
Automatic Sliding Door Systems Driven by Quality Jointly with proven partners TORMAX realises sliding door solutions to meet most varying requirements throughout the world. The centre piece, the drive,
Pneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US
Pneumatic Grippers Parallel and Angular Grippers Catalog 19-2/US Catalog 19-2/US OContents GPR Series Rotary vane driven design GPR GPCR Series P5G-HPM(C) Series P5G-HP Series GPT Series P5G-AP Series
R310EN 2225 (2011.04) The Drive & Control Company
Ball Rail Systems Resist NRII R310EN 5 (011.04) he Drive & Control Company R310EN 5 (011.04) Ball Rail Systems Resist NR II Bosch Rexroth AG 3 Ball Rail Systems Resist NRII General Product Description
Re-board Accessories
Re-board Accessories Plastic Screws Plastic screws specially developed for 16 mm Re-board, but works with most thicknesses. A special version comes with a loop for hanging (only available in transparent
Introduction to Beam. Area Moments of Inertia, Deflection, and Volumes of Beams
Introduction to Beam Theory Area Moments of Inertia, Deflection, and Volumes of Beams Horizontal structural member used to support horizontal loads such as floors, roofs, and decks. Types of beam loads
LED LEONARDO 120 W. LED Fresnel SPOTLIGHT White light, either Tungsten or Daylight balanced Correlated Color Temperature
LED LEONARDO 120 W LED Fresnel SPOTLIGHT White light, either Tungsten or Daylight balanced Correlated Color Temperature OVERVIEW The LED LEONARDO 120W is a highly efficient Fresnel lens spotlight using
ACCESSORIES. Radiant Heater Controller, with 3021 Radiant Heater: Stand-Alone Radiant Heater Controller, with 3021 Radiant Heater.
ACCESSORIES Radiant Heater Controller, with 3021 Radiant Heater: Stand-Alone Radiant Heater Controller, with 3021 Radiant Heater. Assembly A-8984 K~1200D, Temperature Controller: A 400 watt microprocessorbased
Accessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
Modular plastic belt conveyor WK
Modular plastic belt conveyor Contents System information...405 Belts introduction...406 Belts...407 Conveyor sections...408 Conveyor frame components introduction...409 Conveyor frame components...410
9200 9600 Electro. 8700 8600 Electro FEATURES 2700
STRINGING MACHINES 8700 9600 9200 9800 8700 E Six-point, hold-down mounting system. Stationary side-support arms, 4 individually adjustable V-shaped shoulder supports Universal V-shaped side supports handle
TEST REPORT. Rendered to: INTEX MILLWORK SOLUTIONS, LLC. For: Rigid Cellular PVC Guardrail System Hampton RS40
TEST REPORT Rendered to: INTEX MILLWORK SOLUTIONS, LLC For: Rigid Cellular PVC Guardrail System Hampton RS40 Report No: Report Date: 07/26/13 130 Derry Court York, PA 17406-8405 phone: 717-764-7700 fax:
DIGITUS Network & Server Cabinets. UNIQUE Series
DIGITUS Network & Server Cabinets UNIQUE Series Benefits - Server Rack 4-Point locking system front door 3-point locking system rear door Swing handle lock with profile zylinder in front and rear door
City of San Diego, CWP Guidelines
PART 1 -- GENERAL SECTION 08520-1.1 WORK OF THIS SECTION City of San Diego, CWP Guidelines A. The WORK of this Section includes providing aluminum windows with frames, bracing, glazing attachments, screens,
PBZ Heavy. PBZ Heavy. CNC Gantry-Type Machining Center. Power - Performance - Precision. www.knuth-usa.com
CNC Gantry-Type Machining Center Power - Performance - Precision Travel X-axis up to 244 in Y-axis up to 126 in Z-axis up to 39 in Strong Machine bed, dual columns and fixed bridge ensure a rigid frame
2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
Workholding systems. Magnetic clamping plates M-TECS SP 50 M-TECS SP 70
Workholding systems Magnetic clamping plates M-TECS SP 50 M-TECS SP 70 12/2010 M-TECS SP Magnetic clamping system M-TECS square poles for extremely heavy machining M-TECS square poles on a vertical machining
19" Open Rack for Network and Cabling Management
19" Open Rack for Network and Cabling Management Feartures: The CLM-221X-XXXX openrack is a solution of easier assemblying, more competitive price for our customers. All components can be seperated by
Group TRAFFIC MANAGEMENT SPECIALIST ACCESS WAY SOLUTIONS CREATIVE SOLUTIONS TO COMMON CHALLENGES. Products
Group Incorporating: Egmont Doors & totaldoors SPECIALIST ACCESS WAY SOLUTIONS TRAFFIC MANAGEMENT CREATIVE SOLUTIONS TO COMMON CHALLENGES 0800 807 753 trafficmanagement@ultigroup.co.nz www.ultigroup.co.nz
AirBlock Data Center Doors
Data Center Doors AirBlock Data Center Doors What makes AirBlock the best? Works with your existing hot aisle/cold aisle isolation system. Doors accommodate different racks within the same data center;
Equipment Manual. for. Operation of Automatic Polishing Plate Control on the PM5 Precision Lapping & Polishing Machine.
Equipment Manual for Operation of Automatic Polishing Plate Control on the PM5 Precision Lapping & Polishing Machine Ref: BE-01-53-5 PREFACE: PM5 auto-lap/pol MACHINES The PM5 auto-lap/pol features two
glass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
Cabinets 101: Configuring A Network Or Server Cabinet
Cabinets 101: Configuring A Network Or Server Cabinet North, South and Central America White Paper May 2012 www.commscope.com Contents Background Information 3 What is a network or server cabinet? 3 What
Modeling Curved Surfaces
Modeling Cylindrical and Curved Theory Views of Cylinders Contour Lines Extruded Surfaces Revolved Surfaces & Cutouts Profile Shape Axis of Revolution Swept Surfaces & Cutouts Profile Shape Path Curves
TANK FABRICATION. Automated Solutions for Your Tank Fabrication Project. Bug-o Systems www.bugo.com
TANK FABRICATION Automated Solutions for Your Tank Fabrication Project. Bug-o Systems www.bugo.com BUG-O ALL TIME GIRTH WELDER Bug-o Systems offers the Automatic Girth Welder for tank fabrication applications.
and Mounting options NEW Additional Profiles HepcoMotion MCS aluminium frame and machine construction system including MFS fencing system
NEW Additional Profiles and Mounting options HepcoMotion MCS aluminium frame and machine construction system including MFS fencing system MCS Machine Construction System and MFS Machine Fencing System
IMPERIAL DESIGN COMPANIES are specialists in providing. We offer services to the following Industries: Automotive. Aerospace Furniture Medical Civil
51842_ImperialDesignBD 3/6/06 1:10 PM Page 3 IMPERIAL DESIGN SINCE 1980 IMPERIAL DESIGN COMPANIES are specialists in providing ID Personnel: Providing Engineering and Skilled Trades Personnel ID Service:
Dock Hardware & Accessory Products Catalog
Dock Hardware & Accessory Products Catalog Product Page # Product Page # Angle Brackets/Clips 8 Back Up Plate 5 Backing Plate/Hurricane Stop 10 Carriage Bolt Sets 4 Chain Retainer 10 Connector Pin Set
Section #7 Pictorial Table Of Contents. Self Tapping Screws. Pages 918-919 Page 918 Pages 920-921. Tool Hangers. Page 926 Page 927.
Introduction To Section # Pictorial Table Of Contents How To Order End Caps Self Tapping Screws T-Slot Covers T-Slot Tread Strips Metric Laminated Table Tops & Kits Page 916 Page 91 Pages 918-919 Page
Lighting Packages. 230 VAC Fluorescent Enclosure Light:
Spec-00581 H763.422.2211 763.422.2600 Electrical Lighting Packages Electrical Lighting Packages PANELITE Enclosure Lights Overview FEATURES Slim profile allows light to be tucked up out of the way for
Series 3502 Thermal Series 3902 Fixed Thermal 3 1 4 Architectural Grade Horizontal Sliding Window
Windows Curtain Walls Entrances Storefronts Series 3502 Thermal Series 3902 Fixed Thermal 3 1 4 Architectural Grade Horizontal Sliding Window Configurations XO OX XOX Fixed Series 3502 retains an AAMA
PS6500 Storage Arrays Rack Mount Instructions
PS6500 Storage Arrays Rack Mount Instructions Part Number: R724M Rev. A01 Copyright 2010 Dell, Inc. All rights reserved. Dell is a trademark of Dell, Inc. EqualLogic is a registered trademark. All trademarks
HOPLEYS OPENWEBSTEELJOISTS
Design Aid Manual Now also includes Letter of Certification & Bearer Span Table HOPLEYS OPENWEBSTEELJOISTS 2...has over 60 years experience and a respected reputation in Sheet Metal fabrication and associated
Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
NuStep TRS 4000 Parts List 1.6
NuStep TRS 4000 Parts List 1.6 Note: Most parts are available individually, but to simplify installation, ASSEMBLIES (in CAPS) only come fully assembled. Items noted as (not shown) were replaced with current
Architectural Specifications* MODEL HDE
MODEL HDE 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com TNR Model HDE Tech Specs September 4, 2012 Page
ITT Industrial Products
ITT Industrial Products Providing custom industrial solutions to meet customers application needs globally. ITT Control Technologies GmbH under the ITT Enidine brand provides quality energy absorption
TEST REPORT. Rendered to: FAIRWAY BUILDING PRODUCTS, LP. For: LandMarke Railing System. PVC Guardrail System "Patent Number 7,487,941"
TEST REPORT Rendered to: FAIRWAY BUILDING PRODUCTS, LP For: LandMarke Railing System PVC Guardrail System "Patent Number 7,487,941" Report No: Report Date: 05/25/10 130 Derry Court York, PA 17406-8405
mk Conveyor Technology
mk Conveyor Technology One construction kit many options Base Technology Profile Technology Conveyor Technology Factory Equipment Linear Motion Advantages of the mk modular system Everything comes from
Phoenix-3W Series One-Way Security Revolving Doors
Phoenix-3W Series One-Way Security Revolving Doors ONE-WAY SECURITY REVOLVING DOOR SPECIFICATIONS ARCHITECTURAL SPECIFICATIONS Phoenix-3W Series One-Way Security Revolving Door Division 8 Doors and Windows
Ball Rail Tables TKK. with Ball Rail Systems and Ball Screw Drive R310EN 2501 (2008.04) The Drive & Control Company
with Ball Rail Systems and Ball Screw Drive R310EN 2501 (2008.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
IT infrastructure Efficiency-boosting solutions. nextlevel. for data centre
IT infrastructure Efficiency-boosting solutions nextlevel for data centre 2 Rittal IT infrastructure The whole is more than the sum of its parts. The same is true of Rittal The System. With this in mind,
INC Flexi-Sorb. Versatile Flexible Easy To Install Durable Good Noise Reduction Economical. Typical Applications
INC Flexi-Sorb Noise Control Curtain System Versatile Flexible Easy To Install Durable Good Noise Reduction Economical Our Flexi-Sorb noise control curtain product line consists of flexible, durable acoustical
Module 2 - GEARS Lecture 7 - SPUR GEAR DESIGN
Module 2 - GEARS Lecture 7 - SPUR GEAR DESIGN Contents 7.1 Spur gear tooth force analysis 7.2 Spur gear - tooth stresses 7.3 Tooth bending stress Lewis equation 7.4 Tooth bending stress AGMA procedure
WORKHOLDING SOLUTIONS
MANUFACTURING EFFICIENCY WORKHOLDING SOLUTIONS Uptime Optimization Products Results WWW.JERGENSINC.COM Jergens Workolding Solutions Group... Your Uptime Consultants To compete in today s global industry
PHYSICS 111 HOMEWORK SOLUTION #9. April 5, 2013
PHYSICS 111 HOMEWORK SOLUTION #9 April 5, 2013 0.1 A potter s wheel moves uniformly from rest to an angular speed of 0.16 rev/s in 33 s. Find its angular acceleration in radians per second per second.
IMPORTANT INFORMATION
Curved Quadrant Instruction Manual CQ IMPORTANT INFORMATION Toughened glass is completely safe for use in our shower enclosures and bath screens; providing our products are installed according to our guidelines.
Automatic Door Selection Guide
Automatic Door Selection Guide AAADM 1300 Sumner Avenue Cleveland, OH 44115 P: 216-241-7333 F: 216-241-0105 aaadm@aaadm.com Automatic Door Selection Guide General: The members of AAADM manufacture an assortment
Modular Truck Equipment Price List March 1, 2012 800-627-9783 www.ladderracks.com
System Modular Truck Equipment Price List March 1, 2012 800-627-9783 www.ladderracks.com Christensen Manufacturing Corp., Pennington, NJ 08534 System Modular Truck Equipment Tradesman Package SPECIAL SAVE
Video conferencing expanding conferencing experiences
Video conferencing expanding conferencing experiences Stylish mounting solutions for video conferencing Video conferencing furniture Video conferencing is developing fast. Vogel s is capitalising on this
FDH Series Compact Finger Slides
FDH Series Compact Finger Slides Catalog #FDH- Prices effective September 1, 11 Cylinder block- Clear anodized aluminum Top Toolplate and Front Toolbar Clear anodized aluminum Tapped mounting holes ( for
Retail Reception kiosk
Retail Reception kiosk put 42" corner post in below 66" to allow post to extend above kiosk for raised box sign Mini cantilever option - 24" overhead support leg Mini cantilever option - 24" overhead 66/48E
Key data. The practical machines for your specific grinding solution. A member of the United Grinding Group. The Art of Grinding.
The Art of Grinding. A member of the United Grinding Group CT450 / CT550 The practical machines for your specific grinding solution. Key data The CT450 / CT550 are very flexible internal cylindrical grinding
UBM-W SERIES CNC HORIZONTAL BORING & MILLING MACHINE. http://www.uchine.com.tw. CNC Double Column Machining Center UDM series
CNC Double Column Machining Center UDM series CNC Horizontal Heavy Duty Milling Machine UMM series CNC Horizontal Machining Center UHM series Conventional Horizontal Boring & Milling Machine UBM series
Data Center Solutions Guide. Solutions to Support, Protect, Enclose and Connect Data Center Equipment and Infrastructure
Data Center Solutions Guide Solutions to Support, Protect, Enclose and Connect Data Center Equipment and Infrastructure Data Center Solutions Overview Cooper B-Line is your one-stop resource for support
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
Cheshunt Fabrications Ltd
Cheshunt Fabrications Ltd Unit 9a & 9b, Quickbury Farm Hatfield Heath Road Sawbridgeworth Hertfordshire CM21 9HY Phone: 01279 600866 Fax: 020 8609 0050 01279 600868 www.fabber.co.uk Quality in the making
Knürr System Accessories
Knürr System Accessories Features BLANKING PANELS Design identical to racks Tool-less, threaded version available. Varying sizes for quick mounting and efficient cooling. Mechanical accessories are fundamental
Non-Powered Conveyors
Non-Powered Conveyors HB-825-12/03 To contact FKI Logistex, Automation Division: For service: Customer Service and Support Group (CSSG) Hotline 1-800-992-1267 On the World Wide Web: www.fkilogistex.com/automation
AirBlock Data Center Doors
Data Center Doors AirBlock Data Center Doors What makes AirBlock the best? Works with your existing hot aisle/cold aisle isolation system. Doors accommodate different racks within the same data center;
SHARP SVL 4525 LINEAR WAY VERTICAL MACHINING CENTER
SHRP SVL 4525 LINER WY VERTICL MCHINING CENTER PRECISION MCHINE TOOLS Sharp Industries, Inc. 3501 Challenger Street Torrance, C 90503 Tel 310-370-5990 Fax 310-542-6162 Email: info@sharp-industries.com
Formwork for Concrete
UNIVERSITY OF WASHINGTON DEPARTMENT OF CONSTRUCTION MANAGEMENT CM 420 TEMPORARY STRUCTURES Winter Quarter 2007 Professor Kamran M. Nemati Formwork for Concrete Horizontal Formwork Design and Formwork Design
Daily Operator Checks. Monthly Maintenance
CUSTOMER DATE OF INSPECTION SERIAL # RSF # UI Rev # PLC Project # SERVICE REPRESENTATIVE Daily Operator Checks Verify that all safety guards are in place. Verify that all safety signs are in proper location
Railtrac 1000. A unique, flexible, multi-purpose system for welding and cutting. G lobal solutions for local customers everywhere
1000 A unique, flexible, multi-purpose system for welding and cutting. G lobal solutions for local customers everywhere 1 SAB Flexible answer to stiff requirements is a system of components that can be
Axcys Wireless Alarm and Monitoring System Self Storage Units - Containers - Gate - Man Door
Axcys Wireless Alarm and Monitoring System Self Storage s - Containers - Gate - Man Door Complete Facility Security Monitoring Alarming - Roller Shutter Door Position- Gate Position Monitoring - Man Door
PERFORMANCE TEST REPORT. Rendered to: FORMTECH ENTERPRISES, INC. SERIES/MODEL: Truline PRODUCT TYPE: PVC Seawall
PERFORMANCE TEST REPORT Rendered to: FORMTECH ENTERPRISES, INC. SERIES/MODEL: Truline PRODUCT TYPE: PVC Seawall Report No.: Test Dates: 04/17/12 Through: 04/18/12 Report Date: 06/13/12 130 Derry Court
CABLE SUPPORT SYSTEMS
CABLE SUPPORT SYSTEMS eaturing the CADDY CAT HP J-Hook System Why CADDY CAT HP? Why Choose CADDY CAT HP over tray? ast and Easy to Install Much faster installation compared to conventional cable or ladder
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum