A few inches will give your business room to grow...

Transcription

1 A few inches will give your business room to grow...

2 Unitile s Unitile's Wood core product range are made from chipboard particles which are extracted from well managed forests, controlled sources or recycled wood of fibre. This post consumer recyled chipboard particles not only prevent the cutting of trees required for manufacturing of such wood related products but also prevents them from going to near capacity landfill sites. manufacturing process prevents the felling of 200,000 trees per year

3 Unitile Wood Core Unitile Chip Board Unitile Wood Core (UWC) Systems consists of Engineered 600mm square modular panels constructed around a high density E1 grade chipboard core & fully encapsulated with GI on all six sides in a special mechanical interlocking of the top & bottom GI tray. This double folded lock construct into a panel that has an unique in-built stringer at the underside of each panel edge & exhibits fine dimensional tolerances for modular control, accurate alignment of grids & inter-changeability of panels. It fully meets the Euro Class requirement of EN The appropriate surface clearing is then laminated to the top surface. Electrical continuity is maintained through the top & bottom surface of the panel on to the pedestal head through conductive gasket and also ensures positioning & location of the floor panel on to the understructure system. 4 Unitile Chip Board (UCB) Systems consists of Engineered 600mm square modular panels constructed around a high density E1 grade chipboard core with high performance resin bonding. This Gravity lay floor panel fully meets the Euro Class requirements of EN The base surface of the core are laminated using a variety of options such as Aluminum, sheet steel, High Pressure Laminate etc. The appropriate surface covering is then laminated to the top surface of the core material and then trimmed for fine dimensional control, accurate alignment of grids and inter-changeability of panels. The design incorporates a full depth ABS edge band, which while providing total encapsulation of the chipboard core also protects the edge of the surface covering and ingress of moisture. Electrical continuity is maintained through the top and bottom surface of the panel on to the pedestal head through conductive gasket and ensures positioning and location of the floor panel on to the understructure system. 5

4 Wood Core / Chip Board Unitile Wood Core Bare Panel Unitile Wood Core Laminated Panel Wood Core / Chip Board Unitile Chip Board Bare Panel Unitile Chip Board Laminated Panel Unitile Wood Core Series Unitile Chip Board Series Physical characteristics of panel (without top finish) Benefits Physical characteristics of panel (without top finish) Benefits Nominal Dimensions Thickness Density Dimensional Tolerance Length of Panel Side Squareness of Panel Test Standard EN Value 600 X 600 mm 26, 0 mm kg/m ( 5%) +/- 0.2mm High performance construction with unique inbuilt stringer Excellent lateral stability, flexural stiffness & overall mechanical resistance Precision floor level & positive alignment Solid underfoot feel Nominal Dimensions Thickness Density Dimensional Tolerance Length of Panel Side Squareness of Panel Test Standard EN Value 600 X 600 mm 0, 8 mm kg/m ( 5%) +/- 0.2mm High performance construction Excellent lateral stability, flexural stiffness and overall mechanical resistance Precision floor level and positive alignment Solid underfoot feel Thickness of bare Panel Panel Twist Transverse Electrical Resistance Fire Resistance Fire Reaction EN 1081 BSEN BS 476 Part 7 BS 476 Part 6 max 0.5mm 10 1 X 10 REI 0 Class 1 Class 0 Excellent fire (Class O and Class 1) & thermal barrier Equipotential reinforcement for electrical continuity Excellent Acoustic Properties Easy access & maintenance Recyclable & Environment friendly Thickness of bare Panel Panel Twist Transverse Electrical Resistance Fire Resistance Fire Reaction EN 1081 UL 94 BSEN BS 476 PART 7 max 0.5mm 10 1 X 10 V0 REI 0 Class 1 Excellent fire and thermal barrier Equipotential reinforcement for electrical continuity Excellent Acoustic Properties Easy access and maintenance Recyclable and Environment friendly 6 7

5 UNITILE RAISED ACCCESS FLOOR SYSTEMS WOOD CORE (UWC) SERIES Corner - Lock System This system is suitable for the widest variety of office applications. Each floor panel is mechanically secured to the pedestal head at all four corners ensuring maximum rigidity and lateral stability. Access to the sub-floor is simply achieved by releasing the fasteners and lifting the panel. UNITILE RAISED ACCCESS FLOOR SYSTEMS CHIP BOARD (UCB) SERIES System (with Stringers) under-structures provides maximum floor stability. It reduces all lateral movements and also ensures integrity of the floor on removal of panels for access to services in the sub-floor. Stringers are mechanically fastened to the pedestal head and panels then placed on the grid formed. This system is ideal for high finished floor heights. System (with Stringers) under-structures provides maximum floor stability. It reduces all lateral movements and also ensures integrity of the floor on removal of panels for access to services in the sub-floor. Stringers are mechanically fastened to the pedestal head and panels then placed on the grid formed. This system is ideal for high finished floor heights. System (without Stringers) Identical performance features as the UNITILE Corner Lock System, used for finished floor height as low as 65mm. With this systems the range of vertical adjustment is therefore limited. System (without Stringers) Identical performance features as the UNITILE Corner Lock System, used for finished floor height as low as 65mm. With this systems the range of vertical adjustment is therefore limited. STRUCTURAL CLASSIFICATION AS PER EN (UCB) STRUCTURAL CLASSIFICATION AS PER EN (UWC) Unitile UCB Series Panel Top Panel Bottom Panel Edges Nominal THK. mm Under - Structures Grades Available BSEN Classification Unitile UWC Series UWCGG UWCLG Panel Top HPL / Vinyl Panel Bottom Panel Edges Edge Band Edge Trim Edge Band Edge Trim Nominal THK. mm 26, 0 Under - Structures Corner Lock Corner Lock Grades Available Light / Med / Heavy 28, 2 Light / Med / Heavy BSEN Classification Class 1-6 Class - 6 UCBAA UCBAG Aluminum Foil Aluminum Foil Aluminum Foil ABS Edge Band 0, 8 Light / Med Class 1-4 ABS Edge Band 0, 8 Light / Med / Heavy Class 2-6 UCBLA HPL / Vinyl Aluminum Foil ABS Edge Band 2, 40 Light / Med Class - 5 UCBLG HPL / Vinyl ABS Edge Band 2, 40 Light / Med / Heavy Class

6 Open Offices with Hard Floor Finishes Variety of Finishes and Carpets available Laminate PVC Open Offices with Carpets Granite Marble Wood Demountable Low Height Platform for Shopping Malls Marmoleum Carpet Finishes Available Demountable Low Height Platform for Exhibition

7 Contact us : For more details Head Office:- Mumbai : Unit No 2-G, Laxmi Industrial Estate, New Link road, Andheri (West), Mumbai Mob: Tel: /72 Fax: sales@united-group.in International Marketing Office:- Bengaluru : Gala No 58, SL No 5/2, Singasandra Gramathana, Begur Hobli, Hosur Road, Bengaluru Mob: Tel: Telfax : sales@united-group.in