HEPA Terminal Filter Units Types F640, F650, F660

Transcription

1 Detail HEPA Terminal Filter Units Types F640, F650, F660»»»» Filter element dust loading is detected and indicated by an LED Used in medicine, biology, the pharmaceutical industry, and other sensitive areas such as clean rooms Three spigot connection variants: side entry circular, top entry circular, or side entry rectangular Compact design Content overview General information... 2 Diffuser face plates Additional information... 6 Type F Type F Type F Filter elements Specification text Leaflet F6 / 4 / 2 / EN

2 General information Detail Application» HEPA terminal filter units for ceiling installation as final filters and for air distribution.» Fitting of filter elements for the separation of suspended particles such as aerosols, toxic dusts, viruses and bacteria from the air. The terminal filter unit is equipped with a filter dust loading detector that indicates when the filter needs to be replaced; the power supply for the dust loading detector is integrated into the filter element. Material» Airtight casing made of sheet steel with white powder coating (RAL 9010, standard). Construction» Type F640: with side entry circular spigot» Type F650: with side entry rectangular spigot» Type F660: with top entry circular spigot Equipment» HEPA terminal filter unit with integral pressure monitor to detect filter element dust loading.» Independent system that requires no external power supply. Power is supplied by a battery integrated in the filter element (battery life approx. 2 years).» An LED indicates when the filter element and/or the battery has to be replaced.» Two-point fixing of filter elements as standard, four-point fixing upon request.» Three types of diffuser face plate are available. VDW, FD and DLQL.» Sealing integrity test facility.» Pressure measuring points at the top (standard) to monitor differential operating pressure. Options» Integral sealing integrity test facility and internal measuring tube.» Four-point fixing for filter element.» Casing with black powder coating (RAL 9005).» Pressure measuring points at the side of the HEPA terminal filter unit (except for variants Y and Z). Installation and maintenance» Diffuser face with single central fixing screw to facilitate its removal for maintenance. Suitable filter elements» Filter elements have to be ordered separately.» Frame made of extruded anodised aluminium profile.» High-performance filters H13 and H14. Integral 3.6 V battery (battery life approx. 2 years) for supplying power to the filter dust loading detector.» The battery is placed on the upstream side of the filter element. The battery unit and the filter element have to be removed from the terminal casing at the same time. When the filter element has reached the maximum dust loading a new filter element with new battery pack must be installed. 2

3 Diffuser face plates Detail Diffusers Diffuser types DLQL, FD and VDW in sheet steel with white powder coating (RAL 2010, standard). Technical data Configuration and code letters Diffuser face plate Type Code letter FD D Other types of diffuser face plate are available upon request. VDW VDW 680 x 54 V G DLQL L Table 1: Diffuser face plates Possible combinations of unit size and diffuser face plate Diffuser type Unit size 4 Type Dimension in mm Max. volume flow rate in m 3 /h Code letter 4 FD A/H D FD M/N D The diffuser face plate is a part of the unit and must be included in the order. FD B/J D FD C/K D FD E/F D VDW 300x11 A/H V VDW 400x16 M/N V VDW 500x28 B/J V VDW 600x39 C/K V VDW 680x24 E/F V VDW 680x54 E/F G DLQL A/H L DLQL M/N L DLQL B/J L DLQL C/K L DLQL E/F L DLQL Y 680x x L DLQL Z 680x x L Table 2: Volume flow rates for the different diffusers 3

4 Diffuser face plates Detail Filter dust loading detector» The HEPA terminal filter unit is equipped with» The load detector is connected to the battery a filter dust loading detector, which detects by means of a simple plug. An additional plug dust loading of the filter element. (5 Vcc output voltage, 20 ma output pulse» The filter dust loading detector consists of a signal) can be used to connect a service pressure monitor and an LED alarm; colour device that generates a remote signal when changes of the LED are clearly visible from limiting dust loading of the filter element is the room. imminent and the filter element needs to be replaced soon.» No external power supply is required; instead, power is supplied by a battery integrated in the filter element (battery life approx. 2 years). The state of both the filter element and the battery are indicated by the different colours of the LED. Green:» The condition of the filter element is OK. Red:» The filter element has reached the maximum recommended dust loading and must be replaced. Orange:» The battery must be replaced. Installation» The diffuser face plate must be fixed only as shown in the figure, i.e. after the false ceiling has been completed.» Any other installation sequence is not possible. 1 HEPA terminal filter unit 2 Ceiling tile 3 Diffuser face plate Quality assurance» Product quality ex works complies with ISO 9001:2000» EMC certification: 1. EMC Electrostatic discharge EN EMC Radioelectric disturbances EN 55022: EMC Immunity to radiated radio frequencies EN

5 1 Type Type F640 (last number = spigot code no.) Type F650 Type F660 (last number = spigot code no.) 2 Diffuser face plate D FD V VDW G VDW 680 x 54 L DLQL 3 Sealing integrity test facility 1 Sealing integrity test facility (standard) 2 Sealing integrity test facility and internal measuring tube 4 Unit size See technical data in the relevant tables 6 Material of casing 0 Sheet steel, white powder coating (RAL 9010) S Sheet steel, black powder coating (RAL 9005) 7 Zero (empty) 8 Zero (empty) 9 Suspension and measuring points 0 Top S Side 5 Number of filter element fixing points 0 2 fixing points (standard) 4 4 fixing points Table 3: LED kit 0L Includes LED kit Example F648 with side entry circular spigot» Type F640, with side entry circular spigot; spigot diameter of 248 mm Spigot code number 8: F648» Ceiling diffuser type FD Code letter: D» Sealing integrity test facility and internal measuring tube Code number: 2» Unit size suitable for filter element size 535x535x78 mm Code letter: C» Two fixing points for filter element Code number: 0» Casing with white powder coating (standard, RAL 9010) Code number: 0» Suspension holes and measuring points at the top Code number: 0 Example F650 with side entry rectangular spigot» HEPA terminal filter unit type F650 with side entry rectangular spigot Spigot code number 0: F650» Ceiling diffuser type VDW Code letter: V» Sealing integrity test facility Code number: 1» Unit size suitable for filter element size 535x535x78 mm Code letter: C» Four fixing points for filter element Code number: 4» Casing with black powder coating (RAL 9005) Code letter: S» Suspension holes and measuring points at the top Code number: 0 5

6 Additional information Sealing integrity test facility and internal measuring tube 1 Test groove 2 Filter seal 3 Connection for sealing integrity test facility Detail drawing 1: Sealing integrity test facility 1 Measuring tube 8 x 1.5 mm 2 Cheesehead screw M6 x 10 mm Detail drawing 2: Internal measuring tube Suspension and measuring points 50 1 Suspension 2 Measuring point on upstream side 3 Measuring point on downstream side Detail drawing 3: Top suspension and measuring points (code number 0) 1 Suspension 2 Measuring point on upstream side 3 Measuring point on downstream side Detail drawing 4: Side suspension and measuring points (code letter S) 6

7 Casing with diffuser type F640 Technical data M L D Type F640 G1 G J X F S U 40 HEPA terminal filter unit type F640 with side entry circular spigot 1 HEPA terminal filter unit 2 Ceiling tile 3 Diffuser face plate Detail X Seal Filter element with flat section seal 7

8 Casing with diffuser type F640 Technical data Dimensions F640 Unit size 4 Filter element size mm¹) Nominal volume flow rate ²) Dimensions in mm Weight kg Spigot code no. B H T l/s m³/h M J K L F U S G G1 A / A / All weights are net, without packaging. H H M / M / N N B / B / J J C / C / C / K K K E / E / E / F F F Y / x x x x Z / x x x x ) Minipleat filter element with battery and neoprene seal. 2) Volume flow rates and filter elements according to page 11 Table 4: Technical data for F640 Dimensions F640 Ø D mm Spigot code no. (last digit of 1 ) Table 5: Spigot dimensions and code number 8

9 Casing with diffuser type F650 Technical data A M L E Type F650 G G1 X J F Type F650 with side entry rectangular spigot J M K Detail X Dimensions F650 Unit size 4 Filter element size mm¹) Nominal volume flow rate²) Dimensions in mm Weight kg B H T l/s m³/h M A E J K L F G G1 A / H M / N B / All weights are net, without packaging. J C / K E / F Y / x x x x Z / x x x x ) Minipleat filter element with battery and neoprene seal. 2) Volume flow rates and filter elements according to page 11 Table 5: Technical data F650 9

10 Casing with diffuser type F660 Technical data M L D Type F660 G1 X J F HEPA terminal filter unit type F660 with top entry circular spigot J M Spigot dimensions Ø D mm Spigot code no. (last digit of 1 ) K Detail X Table 7: Spigot dimensions and code number Dimensions F660 Unit size 4 Filter element size mm¹) Nominal volume flow rate²) Dimensions in mm Weight kg Spigot code no. B H T l/s m³/h M J K L F G1 A / ,3,4,6 H ,3,4,6 M / ,3,4,6 N ,3,4,6 B / ,4,6 J ,4,6 C / ,8,9 All weights are net, without packaging. K ,8,9 E / ,8,9 F ,8,9 Y / x x x x Z / x x x x ) Minipleat filter element with battery and neoprene seal. 2) Volume flow rates and filter elements according to page 11 Table 8: Technical data F660 10

11 Filter elements Technical data The following table shows the codes and technical data for the minipleat filter elements that are suitable for the HEPA terminal filter units with LED filter load detector. Type Unit size Filter class acc. to EN 1882 Filter element type Minipleat filter panels (¹) F781 Z F781 U F781 Y F782 Z F782 Y H13 H13 H13 H14 H14 Efficiency acc. to EN 1882 [%] Initial pressure differential based on volume flow rate [Pa] Final pressure differential as recommended [Pa] Dimensions BxHxT 305 x 305 x 78 mm F781Z L Nominal volume flow rate 70 l/s (250 m³/h) Dimensions BxHxT 305 x 305 x 91 mm A Nominal volume flow rate 70 l/s (250 m³/h) F781U L Dimensions BxHxT 305 x 305 x 78 mm Nominal volume flow rate 40 l/s (150 m³/h) F782Z L H Dimensions BxHxT 305 x 305 x 150 mm F781Y L Nominal volume flow rate 130 l/s (460 m³/h) Dimensions BxHxT 345 x 345 x 78 mm F782Y L Nominal volume flow rate 70 l/s (250 m³/h) Dimensions BxHxT 345 x 345 x 78 mm F781Z L Nominal volume flow rate 90 l/s (320 m³/h) Dimensions BxHxT 345 x 345 x 91 mm M F781U L Nominal volume flow rate 90 l/s (320 m³/h) Dimensions BxHxT 345 x 345 x 78 mm F782Z L Nominal volume flow rate 55 l/s (190 m³/h) Dimensions BxHxT 345 x 345 x 150 mm F781Y L Nominal volume flow rate 164 l/s (590 m³/h) N Dimensions BxHxT 345 x 345 x 150 mm F782Y L Nominal volume flow rate 90 l/s (320 m³/h) F640, F650, F660 B J C K Dimensions BxHxT 475 x 475 x 78 mm F781Z L Nominal volume flow rate 170 l/s (600 m³/h) Dimensions BxHxT 475 x 475 x 91 mm F781U L Nominal volume flow rate 170 l/s (600 m³/h) Dimensions BxHxT 475 x 475 x 78 mm Nominal volume flow rate 95 l/s (340 m³/h) Dimensions BxHxT 475 x 475 x 150 mm Nominal volume flow rate 315 l/s (1130 m³/h) Dimensions BxHxT 475 x 475 x 150 mm Nominal volume flow rate 175 l/s (620 m³/h) Dimensions BxHxT 535 x 535 x 78 mm F781Z L Nominal volume flow rate 240 l/s (850 m³/h) Dimensions BxHxT 535 x 535 x 91 mm F781U L Nominal volume flow rate 240 l/s (850 m³/h) Dimensions BxHxT 535 x 535 x 78 mm Nominal volume flow rate 130 l/s (465 m³/h) Dimensions BxHxT 535 x 535 x 78 mm Nominal volume flow rate 440 l/s (1585 m³/h) Dimensions BxHxT 535 x 535 x 78 mm Nominal volume flow rate 240 l/s (850 m³/h) F781Y L F781Y L F782Z L F782Z L F782Y L F782Y L E F Dimensions BxHxT 610 x 610 x 78 mm F781Z L Nominal volume flow rate 310 l/s (1100 m³/h) Dimensions BxHxT 610 x 610 x 91 mm Nominal volume flow rate 310 l/s (1100 m³/h) Dimensions BxHxT 610 x 610 x 78 mm Nominal volume flow rate 170 l/s (605 m³/h) Dimensions BxHxT 610 x 610 x 150 mm Nominal volume flow rate 585 l/s (2100 m³/h) Dimensions BxHxT 610 x 610 x 150 mm Nominal volume flow rate 320 l/s (1150 m³/h) F781U L F781Y L F782Z L F782Y L Y Z Dimensions BxHxT 915 x 610 x 78 mm F781Z L Nominal volume flow rate 470 l/s (1700 m³/h) Dimensions BxHxT 915 x 610 x 91 mm Nominal volume flow rate 470 l/s (1700 m³/h) Dimensions BxHxT 915 x 610 x 78 mm Nominal volume flow rate 250 l/s (905 m³/h) Dimensions BxHxT 1220 x 610 x 78 mm F781Z L Nominal volume flow rate 610 l/s (2200 m³/h) Dimensions BxHxT 1220 x 610 x 91 mm Nominal volume flow rate 610 l/s (2200 m³/h) Dimensions BxHxT 1220 x 610 x 78 mm Nominal volume flow rate 335 l/s (1205 m³/h) F781U L F781U L (1) Technical data of filter elements according to leaflet F7/9/2/EN (pages 12, 13 and 14) F782Z L F782Z L 11

12 Specification text Specification text HEPA Terminal Filter Units» HEPA terminal filter units for ceiling installation as final filters and for air distribution.» Fitting of filter elements for the separation of suspended particles such as aerosols, toxic dusts, viruses and bacteria from the air. The terminal filter unit is equipped with a filter dust loading detector that is supplied with power from a battery and indicates when the dust loading has exceeded the maximum recommended value.» Airtight casing made of sheet steel with white powder coating (RAL 9010, standard).» Type F640: with side entry circular spigot» Type F650: with side entry rectangular spigot» Type F660: with top entry circular spigot Technical data Nominal volume flow rate l/s (m 3 /h) Dimensions of casing mm Dimensions of diffuser face plate mm Weight kg Type of diffuser face plate Make TROX Abbreviations A Overall width of rectangular inlet spigot flange (type F650) D Diameter of entry spigot E Overall dimension of casing including entry spigot (type F650) F Overall width of face flange G1 Height of casing J Overall dimensions of flange K Overall dimension of diffuser face plate L Distance between suspension holes at top M Overall dimensions of casing 12

13

14

15

16 Filters Subject TROX España S.A. Polígono Industrial La Cartuja Zaragoza Teléfono Telefax to change All rights reserved TROX España, S.A. (2/2011)