TEST REPORT. Chainsaw Stihl MS 362. Manufacturer and applicant: Andreas Stihl AG & Co. KG Badstrasse 115 D Waiblingen
|
|
- Lauren Conley
- 7 years ago
- Views:
Transcription
1 TEST REPORT Chainsaw Stihl MS 362 Test no.: 5790 OWR OF THE TEST CERTIFICATE: Manufacturer and applicant: Andreas Stihl AG & Co. KG Badstrasse 115 D Waiblingen
2 Test results and evaluations Chainsaw STIHL MS 362 With up to 45 cm cutting length Company: Andreas Stihl AG & Co. KG; Badstrasse 115; D Waiblingen Test item Test results Evaluation Function Engine power P max = 3.4 kw at Md max = 2.8 kw Fuel consumption Chainsaw in the power class up to 4 kw, for professional use Engine Torque Spec. fuel consumption 9800 min Nm 58 kw/l 7500 min -1 max. 3.6 Nm max. power max. torque 47 kw/l absolute / specific 1.8 l/h 380 g/kwh 1.6 l/h 410 g/kwh Exhaust emission complies with level 2 of the standard 2002/88/EG EG-type approval by the federal transport agency e1*97/68sh3- IIA*2004/26*0556*00 Chain lubrication Oil consumption at 5000 min -1 at 9000 min -1 min / max 4 ml/min 9 ml/min 7 ml/min 16 ml/min o Sound pressure level idling full load full throttle no load at ear of the operator 84 db(a) 104 db(a) 105 db(a) - Equivalent sound pressure level, total value 103 db(a) (Average: idling full load full throttle) Accoustic power 113 db(a) according to standard DIN EN ISO Vibration Cutting equipment 40 cm 3/8 (chain 36 RMC) idling full load full throttle no load front handle 3.0 m/s² 4.8 m/s² 2.6 m/s 2 o rear handle 2.6 m/s² 5.0 m/s² 2.8 m/s² Total equivalent vibration according to DIN EN ISO Front handle 3.6 m/s²; rear handle 3.6 m/s² 2 / 5
3 Chain brake Hand guard activation Actuating aver. braking time max. braking force time 38 N 0.1 s 0.12 s Inertia activation horizontal acceleration vertical acceleration Kickback 460 m/s² 992 m/s² Full chisel tooth 3/8 (36RSC) Kickback angle with Chain stop angle brake Cutting equipment 40 cm Weight Weight per unit power Operability / handling With cutting equipment, 45 cm Without cutting equipment 2.2 kg/kw 1.8 kg/kw Control elements Easy to reach and use Primer Deco-valve, Comfort models equipped with "Ergostart" for easier start Chain assembly Simple, chain sprocket easy accessed o Chain tensioning simple, laterally in the chain sprocket cover o Tank caps No tools required for removal, access good o Maintenance Air filter and spark plug covers and casing Air filter Reliability cleaning soiling Easy to disassemble with quick release bolts; easy dissemble using adjustable wrench No tools required, clamps low Initial tests revealed that the fuel tank could not be emptied when the saw was mainly used for vertical cuts. Furthermore the warm motor was sometimes difficult to restart. Modified test models in which these faults were corrected were tested at a later stage. These modifications will be introduced as of December Operating manual clear, well illustrated Operator safety EG-type examination test (DPLF) Test certificate no K-EG 2009/5159 GS-type examination test (DPLF) Test certificate no K-GS 2009/5159 Rating: / / o / - / --./.(o = Standard / = no evaluation, complies with tolerance value) Tolerance values and evaluation criteria are described in the Informationen zur Gebrauchswertprüfung ( Information about type examination tests ). This publication is available from the DLG and the KWF. 3 / 5 - o
4 Description and Technical Data 5303 chainsaw STIHL MS 311 Engine - Air-cooled single-cylinder two-stroke engine - engine displacement 59 cm ³ ; bore 47 mm; stroke 34 mm - Fuel: minimum octane number 90 ROZ; Manufacturer's recommendation: Stihl MotoMix 92 ROZ - Spark plug Bosch WSR-6F or NGK BPMR 7A - Idling 2800 min -1 ; max min -1 (electronic limiter) Cutting equipment - Clutch drum with external chain sprocket; Guide bar with sprocket nose Rollomatic E - Half or full chisel tooth, Pitch 3/8, gauge 1.6 mm - Guide bars for 37, 40, 45 and 50 cm cutting lengths Main dimensions and weights Length incl. cutting equipment 45 cm 890 mm engine unit without spiked bumper 445 mm Width engine unit 195 mm incl. handle 255 mm Height engine unit 220 mm with front hand guard 295 mm Stump height chain sprocket cover 25 mm handle 30 mm Tank volume Fuel 600 ml Chain oil 325 ml Weight incl. cutting equipment 45 cm 7.4 kg without cutting equipment 6.0 kg 4 / 5
5 Test Test carried out by Kuratorium für Waldarbeit und Forsttechnik, Gross-Umstadt DLG-Testzentrum Technik & Betriebsmittel, Gross-Umstadt Field test Forstliches Bildungszentrum Laubau Forstliches Bildungszentrum Königsbronn Authors P. Müßig, KWF, Gross-Umstadt J. Albert, DLG, Gross-Umstadt FPA/DLG-Test committee Geräte und Werkzeuge ( Equipment and tools ) Chairman: Sebastian Paar, FBZ Laubau FPA / DLG-Approval until June 2016 In acknowledgment of the results of the test carried out by the KWF the approved product is also entitled to carry the following test marks: DLG-Testzentrum Technik & Betriebsmittel Groß-Umstadt Max-Eyth-Weg 1 Telephone: 069/ D Gross-Umstadt Fax: 069/24788/110 Kuratorium für Waldarbeit und Forsttechnik e.v. (KWF) Forsttechnischer Prüfungsausschuss (FPA) J.Albert@dlg.org Internet: Spremberger Strasse 1 Telephone: 06078/785-0 D Gross-Umstadt Fax: 06078/ Muessig@kwf-online.de Internet: ENTAM European Network for Testing of Agricultural Machines, is a cooperation between European test stations. ENTAM aims to distribute test results for agricultural and forestry equipment throughout Europe. For more information about the network visit or contact ENTAM at the following address: info@entam.com 5 / 5
TEST REPORT HUSQVARNA 455 Rancher
TEST REPORT HUSQVARNA 455 Rancher TEST CERTIFICATE HOLDER: Manufacturer and applicant: Husqvarna AB SE- 561 82 Huskvarna www.husqvarna.de Test Results and Evaluations Chainsaw Husqvarna 455 Rancher with
More informationNew Holland T7.270 Auto Command
Datasheet DLG PowerMix New Holland T7.27 Auto Command Applicant New Holland Agricultural Equipment SpA Via Plava 8 I-1135 Torino www.newholland.com Test performed by DLG e.v. Test Center Technology and
More informationPicture. Fendt 828 Vario S4. Data sheet DLG PowerMix. Applicant AGCO Fendt GmbH Johann-Georg-Fendt Str. 4 87616 Marktoberdorf Germany www.fendt.
Data sheet DLG PowerMix Fendt 828 Vario S4 Applicant AGCO Fendt GmbH JohannGeorgFendt Str. 4 87616 Marktoberdorf Germany www.fendt.com Test performed by DLG e.v. Test Center Technology and Farm Inputs
More informationRaw power. Smart design.
Raw power. Smart design. Chain saw STIHL MS 362 C-M with M-Tronic With fully electronic engine management The new STIHL MS 362 C-M Raw power, smart design made by STIHL. More power, lighter weight and
More informationData sheet DLG PowerMix
Data sheet DLG PowerMix Fendt 939 Vario S4 Applicant AGCO Fendt GmbH JohannGeorgFendt Str. 4 87616 Marktoberdorf Germany www.fendt.com Test performed by DLG e.v. Test Center Technology and Farm Inputs
More informationPicture. Case IH Optum CVX 300. Datasheet DLG PowerMix
Datasheet DLG PowerMix Case IH Optum CVX 3 Applicant CNH Industrial Austria GmbH Steyrer Strasse 32 43 St. Valentin Austria www.caseih.com Test performed by DLG e.v. Test Center Technology and Farm Inputs
More informationINDEX INTRODUCTION. Reference No. 10-21L-01 R E V I S E D : 2 0 0 5 0 2
10-21L-01 SRM-2305, SRM-2305SI 1 1 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice.
More informationSpecifications for Volkswagen Industrial Engine
Volkswagen 1 industrial engine Specifications for Volkswagen Industrial Engine AFD 1.9 ltr. TDI diesel engine EURO 2 Volkswagen AG, Wolfsburg Volkswagen AG reserves the right to introduce amendments or
More informationVectra Caravan 1.8 90kW/122hp 5-speed station wagon 5 doors 1
Vectra Caravan 1.8 90kW/122hp 5-speed station wagon 5 doors 1 1.8 ECOTEC front, transverse in front of axle, 7 50' forward inclined Bore (mm): 80.5 Stroke (mm): 88.2 Displacement (cc): 1796 Compression
More informationCorsa 1.0 44kW/60hp 5-speed hatchback 3 doors 1
Corsa 1.0 44kW/60hp 5-speed hatchback 3 doors 1 1.0 TWINPORT ECOTEC Cylinders, number: 3 Stroke (mm): 78.6 Displacement (cc): 998 in line; 4 main bearings multi point fuel injection, Motronic 3-way cat.
More informationPetrol engines. Technical specifications 1.4 MPI/59kW 1.6 MPI/75 kw 1.6 MPI/75 kw Engine
ŠKODA Octavia Tour Petrol engines Technical specifications 1.4 MPI/59kW 1.6 MPI/ kw 1.6 MPI/ kw Engine Engine type petrol engine, in-line, liquid cooling system, DOHC, transverse in front petrol engine,
More informationŠKODA Rapid Petrol engines
ŠKODA Rapid Petrol engines Technical specifications 1.2 MPI/55 kw 1.2 TSI/63 kw 1.2 TSI/77 kw 1.6 MPI/77 kw 1.6 MPI/77 kw (A) 1.4 TSI/90 kw (A) Engine Engine type turbocharged petrol petrol engine, in-line,
More informationPetrol engines. turbocharged petrol engine, in-line, liquid cooling system, DOHC, transverse in front 4 Displacement [cm 3 ] 1395
ŠKODA Superb Combi Petrol engines Technical specifications 1.4 TSI/92 kw 1.4 TSI/110 kw ACT 1.4 TSI/110 kw ACT (A) 1.8 TSI/132 kw 1.8 TSI/132 kw (A) 2.0 TSI/162 kw (A) Engine Engine type Cylinders turbocharged
More information912. The engine for construction equipment.
912. The engine for construction equipment....... 24-82 kw at 1500-2500 min -1 These are the characteristics of the 912: Air-cooled 3-, 4-, 5-, 6-cylinder naturally aspirated in-line-engines. Direct injection.
More information1013 E. The engine for agricultural equipment.
1013 E. The engine for agricultural equipment.... -186 kw at 2300 rpm These are the characteristics of the 1013 E: Modern water-cooled 4- and 6-cylinder in-line engine Turbocharging with charge air cooling
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationEngine catalogue. Marine Diesel engines. MAN range - light duty
Engine catalogue Marine Diesel engines MAN range - light duty ENG 10 November 2010 Marine Diesel engines Engine Power Num. of Displacement Design kw cylinders cm3 R6-730 537 6 12,8 inline R6-800 588 6
More informationTechnical Data Valid for model year 2016. The new Caddy
Technical Data Valid for model year 16 The new Caddy Engines with emission standard Euro 6. 1.2 l TSI engine with 62 kw (84 bhp) 1.4 l TSI engine with 92 kw (125 bhp) Engine design/valves per cylinder
More informationHydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l
R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity
More informationC-Max. Ciscomotors SIMPLIFIED MAINTENANCE MANUAL
Ciscomotors C-Max SIMPLIFIED MAINTENANCE MANUAL All information in this publication is based on latest specification s product available at the time of approval for printing. CISCOMOTORS reserves the right
More informationK&T Saw Shop 606-678-9623 or 606-561-4983
13-600072-06 PRO MAC 8200 05/92 to Current IPL 215710-02 Page 1 of 20 Carburetor Assembly www.ktoutdoor.com 13-600072-06 PRO MAC 8200 05/92 to Current IPL 215710-02 Page 2 of 20 Carburetor Assembly 214763-02
More informationVOLVO COMPACT EXCAVATORS ECR28, ECR38 Power installed: ECR28 : 13.5 kw / 18.1 hp ECR38 : 19.7 kw / 26.4 hp Operating Weight : ECR28 : 2727-2821 kg ECR38 : 3343-3437 kg Maximum Digging Depth : ECR28 : 2660-2910
More informationR310EN 2225 (2011.04) The Drive & Control Company
Ball Rail Systems Resist NRII R310EN 5 (011.04) he Drive & Control Company R310EN 5 (011.04) Ball Rail Systems Resist NR II Bosch Rexroth AG 3 Ball Rail Systems Resist NRII General Product Description
More informationSUPER SKUB HYDRA USERS MANUAL AND SPARE PARTS
SUPER SKUB HYDRA USERS MANUAL AND SPARE PARTS Udg. 1 BRUGS- OG VEDLIGEHOLDESESVEJLEDNING PÅ SUPER SKUB HYDRA side 1 Table of contents Machine description... 3 Safety precautions... 4 Operating instructions...
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More information307E. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo. Weights
307E Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights Operating Weight 6800
More informationOIL-FREE ROTARY SCROLL COMPRESSOR. ECOLIFE 1,5 15 kw
OILFREE ROTARY SCROLL COMPRESSOR ECOLIFE 1, 1 kw EN Why The continuous innovation of the compressed air tools and machineries, the evolution of specific productive processes and uses, require exclusively
More informationC18 ACERT Fire Pump Tier 3 448 bkw/600 bhp @ 1750 rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in3) Aspiration...Turbocharged Aftercooled Compression
More informationTechnical Data Valid for model year 2016. The new Caddy
Technical Data Valid for model year 16 The new Caddy Engines with emission standard Euro 6. 1.2 l TSI engine with 62 kw (84 bhp) 1.4 l TSI engine with 92 kw (125 bhp) Engine design/valves per cylinder
More informationTool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
More informationSKID STEER LOADER CK20-1 / CK30-1 20-1 30-1
CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @
More informationP7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc
P7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc Installation Timing Pin Location CAUTION: Before installing the injection pump, be sure that number 1 cylinder is at the Top Dead Center
More informationS KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg
SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation
More informationK&T Saw Shop 606-678-9623 or 606-561-4983
11-600072-02 PROMAC 800 CHAIN SAW 08/80 to 05/85 IPL 215724-01 Page 1 of 20 Accessories & Tools www.ktoutdoor.com 11-600072-02 PROMAC 800 CHAIN SAW 08/80 to 05/85 IPL 215724-01 Page 2 of 20 Accessories
More informationOperating Instructions
Beuler Höhe 11, D-45525 Hattingen Tel. +49(0)2324/55515 info@stephandahlmann.de www.stephandahlmann.com Operating Instructions Contents Page 1. Designation and Illustration of the Machine 1 2. EC Declaration
More informationFixed displacement vane pumps
Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double
More informationE08 E10. Compact Excavators
E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
More informationSkid Steer Loader CK20-1 / CK30-1 20-1 30-1
CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg NET POWER CK20-1: 51,8 kw / 69,5 HP @ 2.500 rpm CK30-1: 62 kw / 84 HP @ 2.500 rpm
More informationHydraulic control unit series 0086-372-01
Technical Product Information No. 1290 EN Hydraulic control unit series 0086-372-01 Contents Page About this Technical Product Information (TPI) 2 The ORTLINGHAUS numbering system 2 About the product 3
More informationCREATING POWER SOLUTIONS. 2L41C 3L41C 3L43C 4L41C 4L42C 4L43C. Hatz Diesel. www.hatz-diesel.com
CREATING POWER SOLUTIONS. 2L41C 3L41C 3L43C 4L41C 4L42C 4L43C Hatz Diesel EN www.hatz-diesel.com Exhaust gas recirculation (EGR) For years already the Hatz 4L42C has been successfully fitted with a robustly
More informationRexroth Linear Motion Technology
2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Ball Rail Systems R310A 2202 (2007.05) Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Standard
More informationCooling system components, removing and installing
Engine BHW Cooling system components, removing and installing Page 1 / 24 19-1 Cooling system components, removing and installing Warning! When doing any repair work, especially in the engine compartment,
More informationRadial piston pumps type R and RG
Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power
More informationOperator s manual 395XP 395XPG. Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Operator s manual 395XP 395XPG Please read the operator s manual carefully and make sure you understand the instructions before using the machine. English KEY TO SYMBOLS Symbols on the machine: WARNING
More informationD0834 LOH Performance diagrams. D0834 LOH Technical data. Engines. 162 kw 151 kw 132 kw. 162 kw. 151 kw 132 kw
D0834 LOH D0834 LOH Performance diagrams Engines Piston displacement 4.6 liter bore 108 mm stroke 125 mm Power output for EURO 3, EURO 4, EURO 5 and EEV Emission standard EEV EURO 5 EURO 4 EURO 3 Engine
More informationTechnical Data Valid for model year 2013. The Crafter
Technical Data Valid for model year 2013 The Crafter Information on fuel consumption and can be found within the technical data. Not all combinations of engine, gearbox and auto body design are possible.
More informationService Packages & Pricing
Service Packages & Pricing Silver Gold Motorcycle Service Packages Change oil & filter Change oil & filter Fuel system treatment $ 109.95 $ 129.95 Platinum Replace spark plugs Change oil & filter Fuel
More informationProduct catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
More informationREMOVAL AND INSTALLATION
303-01C-1 REMOVAL AND INSTALLATION Engine Body On Special Tool(s) Adapter For 303-D043 303-D043-02 or equivalent Special Tool(s) 303-01C-1 Turbocharger Lifting Bracket 303-1266 Wrench, Fan Clutch Nut 303-214
More informationAdjustment Data MAZDA - 626-2.0 Comprex D - RF-CX
Adjustment Data MAZDA - 626-2.0 Comprex D - RF-CX Engine (general) Engine code RF Capacity 1998 (cc) Idle speed 725 ± 25 Valve clearance Valve clearance Cold Inlet 0.25 (mm) Exhaust 0.35 (mm) Compression
More informationChainsaw Safety. This training will prepare you to safely operate chainsaws, as well as perform basic servicing and maintenance.
Chainsaw Safety Photo taken by Ann Steele, SSAI This training will prepare you to safely operate chainsaws, as well as perform basic servicing and maintenance. Personal Protective Equipment ANSI approved
More information4000 Series 4008TAG2A Diesel Engine ElectropaK 947 kwm @ 1500 rpm
The Perkins 4000 Series family of 6, 8, 12 and 16 cylinder diesel engines was designed in advance of today s uncompromising demands within the power generation industry and includes superior performance
More informationSKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V
SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V IN THE BEGINNING What began in the 19th century as an agricultural implement manufacturer has grown into a 21st century compact equipment powerhouse
More informationJCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS
OPERATING WEIGHT: 9,480 lb (4,300 kg) 10,472 lb (4,750 kg) NET ENGINE POWER: 45 hp (33.1 kw) Interim Tier IV STATIC DIMENSIONS A Sprocket Idler Centers 6-1 (1845) 6-6 (1990) B Undercarriage Overall Length
More informationINSTRUCTION. Industrial Sewing Machines. No. 010012. First published : June 1997 Second edition : March 2001
INSTRUCTION Industrial Sewing Machines First published : June 1997 Second edition : March 2001 No. 010012 INTRODUCTION Thank you for your purchasing Kansai Special's DLR Series. Read and study this instruction
More information800 Series Tier 2 / Stage 2
800 Series Tier 2 / Stage 2 Powered by your needs Perkins has been advancing diesel engine technology for over 70 years. Today we are designing, developing and manufacturing engines that meet customer
More informationHow To Use A Corona Mdi 110
CORONA MDI 110 APPLICATION Domestic water meter FEATURES 4 Modular multi-jet domestic meter with inductive scanning (without magnetic influence) 4 System capability, with standard applicable pulse output
More informationK&T Saw Shop 606-678-9623 or 606-561-4983
12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 1 of 16 Accessories www.ktoutdoor.com 12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 2 of 16 Accessories
More informationTechnical Data Valid for model year 2013. The Caddy
Technical Data Valid for model year 13 The Information on fuel consumption and O2 emissions can be found within the technical data. Not all combinations of engine, gearbox and auto body design are possible.
More informationHR46 HARVESTER. Thinning Specialist
HR46 HARVESTER Thinning Specialist The history of Sampo Rosenlew forest machines Sampo Rosenlew today The founder of Sampo Rosenlew, mr Timo Prihti was born and raised on a farm. In Finland this means
More informationthe requirements for work instruction and a routine for communication between workers the requirement for a separate chainsaw room the requirements
Supplement to the booklet "Working with Chain Saw" published by Swedish Forestry Board and which includes a summary of mandatory national regulations (AFS 2012:01) for the use of chainsaw and rules and
More informationENGINEERING ENGINEERING PERFORMANCE PERFORMANCE
PERFORMANCE ENGINEERING PERFORMANCE ENGINEERING Every part, every component, every system on a KOHLER engine is guided by our exclusive Performance Engineering standards standards that drive us to operate
More informationThe CLIPPER Solutions
The CLIPPER Solutions 111 112 C51 6,5 Hp Ø 350mm 76kg Compact, robust and highly manoeuvrable machines designed for both wet and dry cutting of concrete and asphalt. Machine delivered without diamond blade.
More information1 Air-to-Air AfterCooling. 2 Engine Only. Capacity will vary with radiator size and use. of cab heater.
Diesel Truck Engine 3126B 175-330 hp 420-860 @ 1440 rpm Peak CATERPILLAR ENGINE SPECIFICATIONS 6-Cylinder, 4-Stroke-Cycle Diesel Bore in (mm)... 4.33 (110) Stroke in (mm)... 5.0 (127) Displacement cu in
More informationElectric Powered Forklift 1.5-2.0 ton
Electric Powered Forklift 1.5-2.0 ton E4 C4E150 C4E160-180 C4E160L-180L C4E200 www.bt-forklifts.com Electric Powered Forklift 1.5 ton Truck specifications C4E150 1.1 Manufacturer BT 1.2 Model C4E150 1.3
More informationThat s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance
[ That s ] E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250 Training reality with industrial performance Concept TURN 250 Uncompromising quality right down to the last bolt, at an unbeatable
More informationT-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
More informationDATA PD-500-000. SV13.., SV14.. Levelling Valves. Product. Function. Technical Features. Range Overview
Commercial Vehicle Systems Product DATA SV.., SV.. Doc. No. Y075 (Rev. 00) PD-500-000 Function On vehicles fitted with air suspension, the Levelling Valve ensures that the axle suspension air bags maintain
More informationDiesel and LPG Forklift Trucks Capacity 4000 5000 kg H 40, H 45, H 50 SERIES 394
Diesel and LPG Forklift Trucks Capacity 4000 5000 kg H 40, H 45, H 50 SERIES 394 Safety Linde ProtectorFrame: Overhead guard and frame form a structural unit, resulting in maximum stability and safety.
More informationImpact Testing Systems
The more intelligent solution... Impact Testing Systems The more intelligent solution... Tronjestraße 8, 44219 Dortmund Tel.: +49 231 912980 0 Fax.: +49 231 179855 www.coesfeld.com mail@coesfeld.com Introduction
More information3304B. Marine Auxiliary Engine SPECIFICATIONS STANDARD EQUIPMENT ACCESSORY EQUIPMENT PERFORMANCE DATA. 56 bkw (75 bhp) 100 mhp @ 1200 rpm
Marine Auxiliary Engine SPECIFICATIONS 3304B 56 bkw (75 bhp) 100 mhp @ 1200 rpm Shown with Accessory Equipment I-4, 4-Stroke-Cycle-Diesel Emissions...IMO compliant Displacement... 7.0 L (425 cu. in.) Bore...
More informationEME 35 Gasoline Engine User Manual
EME 35 Gasoline Engine User Manual Eagle Master Engine EME 35 User Manual 1 SAFETY INSTRUCTIONS Thank you for purchasing EME 35 gasoline Engine. We at EME always strive to product reliable engines that
More informationGeneral Dimensions and Weights - Non Loader
Home > Equipment > Tub Grinders > TG5000 TG5000 Specs General Dimensions and Weights - Non Loader Maximum Length - Transport 39.2' 12 m Maximum Length - Conveyor Unfolded 61.1' 18.6 m Maximum Width (Transport)
More information301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
More informationPC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3
PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing
More informationLEVEL 2 CERTIFICATE OF COMPETENCE IN CHAIN SAW AND RELATED OPERATIONS ASSESSMENT SCHEDULE CS30 - MAINTAIN AND OPERATE THE CHAINSAW
Registered Charity No. 1096429 STONELEIGH PARK, WARWICKSHIRE CV8 2LG Tel: 024 7685 7300 Fax: 024 7669 6128 Email: information@nptc.org.uk LEVEL 2 CERTIFICATE OF COMPETENCE IN CHAIN SAW AND RELATED OPERATIONS
More informationEurovacuum EV Series. Single Stage Oil Sealed Rotary Vane Pump
Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pump Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pumps Eurovacuum Company is offering its various products to meet industrial vacuum
More informationHeating with wood chips and pellets
YOUR RELIABLE PARTNER Heating with wood chips and pellets Present on the market 110 for over years 90-150 Advantages of the HERZ firematic boiler User friendly with: Easy operation Automatic cleaning system
More informationBoWex SD, SD1 and SD2 Operating-/Assembly Instructions
D-807 Rheine 0111 E 1 curved-tooth gear couplings are flexible shaft connections. They are able to compensate for shaft displacement caused by, as an example, inaccuracies in production, heat expansion,
More information304C CR Mini Hydraulic Excavator
304C CR Mini Hydraulic Excavator Engine Model Mitsubishi S4Q2 Rated net power 31 kw 42 hp (ISO 9249) Weights Operating weight 4800 kg 10,582 lb with canopy Operating weight 4920 kg 10,844 lb with cab Weight
More informationPetrol Hedge Trimmer - PHT8462
Petrol Hedge Trimmer - SAFETY AND OPERATING MANUAL IMPORTANT: Read these instructions carefully and be sure you understand them. There is a risk of serious personal injury if you do not follow the instructions
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationK&T Saw Shop 606-678-9623 or 606-561-4983. 12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 1 of 11 Accessories
12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 1 of 11 Accessories 12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 2 of 11 Accessories 68899 Piston Assy - 0.005 in. oversize 66790 Ring Set - Piston 0.005
More informationTomos A3 1988 Workshop Manual
Tomos A3 1988 Workshop Manual The following is a modified and English-only version of the A3 manual found at the MRA: http://www.mopedriders.org/article_view.php?faq=2&fldauto=27 Please note that this
More informationDiesel and gas engine systems for EURO VI on-highway applications
Diesel and gas engine systems for EURO VI on-highway applications Mercedes-Benz engines in the OM 93X and OM 47X model series. Outstanding design and efficiency. Specifically developed to comply with the
More informationSCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
More information2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
More informationAIR POWERED ENGINE INTRODUCTION. Pramod Kumar.J Mechanical Engineer, Bangalore, INDIAs
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 2, March-April 2016, pp. 66 72, Article ID: IJMET_07_02_010 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=2
More informationHydraulic multidisc Brake H420
S320gb - rev 02/09 S E R V I C E Hydraulic multidisc Brake H420 A N U A L WARNER ELECTRIC EUROPE Rue Champfleur, B.P. 20095, F- 49182 St Barthélemy d Anjou Cedex Tél. +33 (0)2 41 21 24 24, Fax + 33 (0)2
More informationSITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS drive system for powerful forces on a short stroke hydraulic actuation closing force
More information3516 Industrial Engine
CAT ENGINE SPECIFICATIONS V-16, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 69.06 L (4,214.3 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...13.0:1
More informationPos. Qty. Article Description Price / Clamping surface 1.300 x 430 mm Additional table load 1200 kg 3 T-slots 14 H12 for mounting on fixture, etc..
Offer 1 1 Vertical CNC-machining centre model STAMA MC 531 Completely refurbished pre-owned machine Year of construction: 1998, Weight: 8.000 kg Machine-No. 1113 (Picture similiar) Scope of delivery: Technical
More informationNorbro Series 40R Pneumatic Actuator Double Acting or Spring Return
Pneumatic Actuator Double Acting or Spring Return Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators
More information1/29/2008 DB30S. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 14
DB30S Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 14 ENGINE Part UPC Number Description Baja Description 31 DB30S-100 883099115806 CLUTCH 1 1 32 DB30S-101 883099115813 ENGINE 1
More informationMOTORHOE RT 401 Gasoline engine
GB 03/05 MOTORHOE RT 401 Gasoline engine USER S MANUAL INDEX READ THIS MANUAL CAREFULLY All right reserved This manual cannot be either reproduced or released without the manufacturer s prior written consent.
More informationOperating Instructions Drill rig DRU160
Operating Instructions Drill rig DRU160 Index 000 / 001 Original operating instructions 10988825 en / 20.10.2009 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
More informationOperating Instructions
Beuler Höhe 11, D-45525 Hattingen Tel. +49(0)2324/55515 info@stephandahlmann.de www.stephandahlmann.com Operating Instructions Contents Page 1. Designation and Illustration of the Machine 1 2. EC Declaration
More informationCold milling machine W 1000 F. Technical specification
Cold milling machine W 1000 F Technical specification Technical specification 2 Cold milling machine W 1000 F on four wheels Cold milling machine W 1000 F on four crawler tracks Milling width max. mm 1,000
More informationVibration and Noise Information
Author TOOJH Rev(1) Product Ergonomics & Industrial Design 9 Jan -14 Page 1(25) Vibration and Noise Information VIBRATION AND NOISE INFORMATION... 1 INTRODUCTION... 2 GENERAL INFORMATION VALID FOR MOST
More information