SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY

Size: px
Start display at page:

Download "SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY"

Transcription

1 Revision date: 06/21/2013 Version: 1.0 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY 1.1. Product Identifier Product Form: Article Product Name: Morse Bi-Metal Saw Blades and Hole Saws, Painted Product Code: M-2, M-9, M-10, M-12, M-14, M-16 Synonyms: Reciprocating Blades, Jig Saw Blades, Power Hack Saw Blades, Hack Saw Blades, Hole Saws 1.2. Intended Use of the Product Use of the Substance/Mixture: Material Cutting Tools 1.3. Name, Address, And Telephone of the Responsible Party The M. K. Morse Company th St. SE Canton, OH T Emergency Telephone Number Emergency Number : SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Not classified, considered an article under OSHA 29 CFR Label Elements GHS-US Labeling No labeling applicable 2.3. Other Hazards Other Hazards not Contributing to the Classification: Morse painted Bi-Metal Saw Blades and Hole saws are made of metal ingredients and water and powder based paints that may be hazardous on their own, but the final products in their finished forms are not hazardous according to GHS criteria and are considered articles under OSHA 29 CFR Cutting, grinding, melting, welding, or physical altercation of the blade itself may cause these metals and chemicals to be released, but under normal sawing conditions these blades are articles and not classified for physical or health hazard criteria under OSHA 29 CFR Under extreme heat and temperature conditions the product may release hazardous decomposition products (above 2800 F, ~1538 C), including metal oxides that may cause metal fume fever. Dust may be generated from materials being cut, appropriate personal protective equipment should be worn. While this material is classified as not hazardous under OSHA regulations, this SDS contains valuable information critical to the safe handling and proper use of the product. This SDS should be retained and available for employees and other users of this product Unknown Acute Toxicity (GHS-US): No data available SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.2. Mixture Name Product Identifier % Classification (GHS-US) Iron (CAS No.) Not classified Cobalt (Saw Blades Only) (CAS No.) Resp. Sens. 1, H334 Skin Sens. 1, H317 Carc. 2, H351 Aquatic Chronic 4, H413 Tungsten (CAS No.) Not classified Molybdenum (CAS No.) Not classified Chromium (CAS No.) Not classified Vanadium (CAS No.) Not classified Manganese (CAS No.) Not classified Carbon (CAS No.) Not classified Nickel (M-9 Saw Blades Only) (CAS No.) Skin Sens. 1, H317 Carc. 2, H351 06/21/2013 EN (English) 1/5

2 STOT RE 1, H372 Aquatic Chronic 3, H412 Silicon (CAS No.) Not classified Aluminum (CAS No.) Not classified Phosphorus elemental (CAS No.) Pyr. Sol. 1, H250 Acute Tox. 2 (Oral), H300 Acute Tox. 2 (Dermal), H310 Acute Tox. 2 (Inhalation), H330 Acute Tox. 4 (Inhalation:dust,mist), H332 Skin Corr. 1A, H314 Aquatic Acute 1, H400 Sulfur (CAS No.) Comb. Dust Skin Irrit. 2, H315 Full text of H-phrases: see section 16 SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: If you feel unwell, seek medical advice (show the label where possible). If medical advice is needed, have product container or label at hand. Never give anything by mouth to an unconscious person. First-aid Measures After Inhalation: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. Obtain medical attention if breathing difficulty persists. First-aid Measures After Skin Contact: Brush off loose particles from skin. If cuts or injury occur seek medical attention immediately. First-aid Measures After Eye Contact: Flush with plenty of water for at least 15 minutes. Seek medical advice if irritation develops or persists. Seek medical attention if material is embedded in eye. First-aid Measures After Ingestion: Seek medical attention immediately Most Important Symptoms and Effects, Both Acute and Delayed Symptoms/Injuries: Not expected to present a significant hazard under anticipated conditions of normal use. Symptoms/Injuries After Inhalation: Inhalation of material being cut may cause respiratory irritation or other harmful effects. Symptoms/Injuries After Skin Contact: Dust generated from material cutting may cause a slight irritation. Slivers may be generated, which could cause cuts. Cuts from the blade itself could cause a serious health hazard. Symptoms/Injuries After Eye Contact: Dust generated from material cutting may cause a slight irritation. Slivers may be generated, which could cause mechanical irritation or injure the eye. Symptoms/Injuries After Ingestion: Ingestion is not considered a potential route of exposure Indication of Any Immediate Medical Attention and Special Treatment Needed If you feel unwell, seek medical advice (show the label where possible). SECTION 5: FIREFIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Use extinguishing media appropriate for surrounding fire. Unsuitable Extinguishing Media: Do not use a heavy water stream. Use of heavy stream of water may spread fire Special Hazards Arising From the Substance or Mixture Fire Hazard: A non-combustible material, not considered flammable but will melt at 2800 F (~1538 C) Explosion Hazard: Product is not explosive. Reactivity: Stable at ambient temperature and under normal conditions of use Advice for Firefighters Firefighting Instructions: Exercise caution when fighting any chemical fire. Protection During Firefighting: Do not enter fire area without proper protective equipment, including respiratory protection. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: Avoid breathing (dust). Avoid all contact with skin, eyes, or clothing. Use caution when handling or using blades or hole saws, as sharp teeth may cause injury For Non-emergency personnel Protective Equipment: Use appropriate personal protection equipment (PPE). Emergency Procedures: Collect as any solid. Avoid creating or spreading dust. 06/21/2013 EN (English) 2/5

3 For Emergency Responders Protective Equipment: Use appropriate personal protection equipment (PPE). Emergency Procedures: Avoid creating or spreading dust. Contain and collect as any solid Environmental Precautions Avoid release of product into the environment Methods and Material for Containment and Cleaning Up Methods for Cleaning Up: Minimize generation of dust. Collect spillage Reference to Other Sections See heading 8, exposure controls and personal protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Welding, cutting, physically altering, or exposing the blade to temperatures exceeding temperatures above 2800 F (1538 C) may melt materials and release metal oxides, fumes, and decomposition products from paint coating. Hygiene Measures: Handle in accordance with good industrial hygiene and safety procedures. Do not breathe dust. Use appropriate personal protective equipment when handling and observe good personal hygiene measures after handling Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Do not pressurize, cut, or weld product. Storage Conditions: Store in a dry, cool place. Store away from incompatible materials. Incompatible Products: Strong acids. Strong bases. Strong oxidizers Specific End Use(s) Material Cutting Tools. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters The ingredients within this product have individual occupational exposure limits (OELs), however according to 29 CFR this product is considered an article and is not subject to listing requirements on the SDS Exposure Controls Appropriate Engineering Controls Personal Protective Equipment Hand Protection Eye Protection Skin and Body Protection Respiratory Protection SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State : Solid Appearance : Metal, various colors. Odor : Not applicable Odor Threshold : Not applicable ph : Not applicable Relative Evaporation Rate (butylacetate=1) : Not applicable Melting Point : C (2800 F) Freezing Point : Not applicable Boiling Point : Not applicable Flash Point : Not applicable Auto-ignition Temperature : Not applicable Decomposition Temperature : Not applicable Flammability (solid, gas) : Not applicable Vapour Pressure : Not applicable Relative Vapor Density at 20 C : Not applicable Relative Density : Not applicable Specific Gravity 7.9 Solubility : Insoluble. : Provide adequate ventilation. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. : Not generally required. The use of personal protective equipment may be necessary as conditions warrant. : Protective gloves. : Chemical goggles or safety glasses. : Use of protective coveralls and long sleeves is recommended. : Use NIOSH-approved air-purifying or supplied-air respirator where airborne concentrations of dust are expected to exceed exposure limits. 06/21/2013 EN (English) 3/5

4 Log Pow : Not applicable Log Kow : Not applicable Viscosity, Kinematic : Not applicable Viscosity, Dynamic : Not applicable 9.2. Other Information No additional information available SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity Stable at ambient temperature and under normal conditions of use 10.2 Chemical Stability Stable under normal conditions Possibility Of Hazardous Reactions Hazardous polymerization will not occur Conditions To Avoid Melting point. Welding, cutting, or physically manipulating the blade Incompatible Materials Strong acids. Strong bases. Strong oxidizers Hazardous Decomposition Products Metal oxides. Fumes. Inhalation of fumes may cause metal fume fever. SECTION 11: TOXICOLOGICAL INFORMATION Information on Toxicological Effects Acute toxicity : Not classified The ingredients within this product have individual toxicity values, however according to 29 CFR this product is considered an article and is not subject to listing requirements on the SDS. Skin Corrosion/Irritation: Not classified Serious eye Damage/Irritation: Not classified Respiratory or Skin Sensitisation: Not classified Germ Cell Mutagenicity: Not classified Carcinogenicity: Not classified The ingredients within this product have individual carcinogenicity classifications, however according to 29 CFR this product is considered an article and is not subject to listing requirements on the SDS. Reproductive Toxicity: Not classified Specific Target Organ Toxicity (Single Exposure): Not classified Specific Target Organ Toxicity (Repeated Exposure): Not classified Aspiration Hazard: Not classified Symptoms/Injuries After Inhalation: Inhalation of material being cut may cause respiratory irritation or other harmful effects. Symptoms/Injuries After Skin Contact: Dust generated from material cutting may cause a slight irritation. Slivers may be generated, which could cause cuts. Cuts from the blade itself could cause a serious health hazard. Symptoms/Injuries After Eye Contact: Dust generated from material cutting may cause a slight irritation. Slivers may be generated, which could cause mechanical irritation or injure the eye. Symptoms/Injuries After Ingestion: Ingestion is not considered a potential route of exposure. SECTION 12: ECOLOGICAL INFORMATION Toxicity The ingredients within this product have individual aquatic toxicity values, however according to 29 CFR this product is considered an article and is not subject to listing requirements on the SDS Persistence and Degradability No additional information available Bioaccumulative Potential The ingredients within this product have individual bioaccumulation values however according to 29 CFR this product is considered an article and is not subject to listing requirements on the SDS Mobility in Soil No additional information available Other Adverse Effects Avoid release of product into the environment. SECTION 13: DISPOSAL CONSIDERATIONS Waste Treatment Methods Waste Disposal Recommendations: Dispose of waste material in accordance with all local, regional, national, and international regulations. 06/21/2013 EN (English) 4/5

5 SECTION 14: TRANSPORT INFORMATION In accordance with ICAO/IATA/DOT/TDG UN Number Not regulated for transport UN Proper Shipping Name Not regulated for transport Additional Information Transport by Sea Not regulated for transport. Air Transport Not regulated for transport. SECTION 15: REGULATORY INFORMATION US Federal Regulations The ingredients within this product are listed on the TSCA inventory, and are subject to SARA 313 reporting, however according to 29 CFR this product is considered an article and is not subject to listing requirements on the SDS US State Regulations The ingredients within this product are present on state regulatory lists and state right to know lists, however according to 29 CFR this product is considered an article and is not subject to listing requirements on the SDS. SECTION 16: OTHER INFORMATION Data Sources : This document has been prepared in accordance with the SDS requirements of the OSHA Hazard Communication Standard 29 CFR This product is considered an article under OSHA 29 CFR GHS Full Text Phrases (Full text phrases for ingredient classifications, does not reflect mixture classification) Acute Tox. 2 (Oral) Acute toxicity Oral Category 2 Acute Tox. 2 (Dermal) Acute toxicity Dermal Category 2 Acute Tox. 2 (Inhalation) Acute toxicity Inhalation Category 2 Acute Tox. 4 (Inhalation: dust, mist) Acute toxicity Inhalation Category 4 (dust, mist) Aquatic Acute 1 Hazardous to the aquatic environment - Acute Hazard Category 1 Aquatic Chronic 3 Hazardous to the aquatic environment - Chronic Hazard Category Aquatic Chronic 4 Hazardous to the aquatic environment - Chronic Hazard Category Carc. 2 Carcinogenicity Category 2 Comb. Dust Combustible dust hazard Pyr. Sol. 1 Pyrophoric solids Category Resp. Sens. 1 Respiratory sensitisation Category 1 Skin Corr. 1A Skin Corrosion/irritation Category 1A Skin Irrit. 2 Skin Corrosion/irritation Category Skin Sens. 1 Skin sensitisation Category 1 STOT RE 1 Specific target organ toxicity Repeated exposure Category 1 H250 Catches fire spontaneously if exposed to air H300 Fatal if swallowed H310 Fatal in contact with skin H314 Causes severe skin burns and eye damage H315 Causes skin irritation H317 May cause an allergic skin reaction H330 Fatal if inhaled H332 Harmful if inhaled H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled H351 Suspected of causing cancer H372 Causes damage to organs through prolonged or repeated exposure H400 Very toxic to aquatic life H412 Harmful to aquatic life with long lasting effects H413 May cause long lasting harmful effects to aquatic life This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product. SDS US (GHS HazCom) 06/21/2013 EN (English) 5/5

EXPANDED PVC MATERIAL SAFETY DATA SHEET

EXPANDED PVC MATERIAL SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY 1.1. Product Identifier Product Form: Mixture Product Name: Expanded PVC (all colors) 1.2. Intended Use of the Product Use of the Substance/Mixture:

More information

3.1. Substance Not applicable 3.2. Mixture Name Product identifier % Classification (GHS-US) Fastcut resin cloth A None Not classified

3.1. Substance Not applicable 3.2. Mixture Name Product identifier % Classification (GHS-US) Fastcut resin cloth A None Not classified SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Flap Wheels 1.2. Relevant identified uses of the substance or mixture and uses advised

More information

: Resin Fibre Disc with Special Coating Material

: Resin Fibre Disc with Special Coating Material SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Resin Fibre Disc with Special Coating Material 1.2. Relevant identified uses of

More information

: Resin Fibre Discs - Aluminum Oxide, Zirconia Alumina

: Resin Fibre Discs - Aluminum Oxide, Zirconia Alumina Resin Fibre Discs - Aluminum Oxide, Zirconia Alumina SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Resin Fibre Discs - Aluminum

More information

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY Revision date: 11/05/2013 Version: 1.0 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY Product Identifier Product name: Synonyms: Anticoagulant Citrate Dextrose Solution, Formula

More information

: Got Pests...Get Revenge Ant Killer Granules

: Got Pests...Get Revenge Ant Killer Granules SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product code : 4468 : Got Pests...Get Revenge Ant Killer Granules 1.2. Relevant identified

More information

: Bacterial Enzyme Drain Treatment

: Bacterial Enzyme Drain Treatment Revision date: 04/15/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture Product code : 565-7010 : 1.2. Relevant

More information

: Focus GC 55 Glass & Window Cleaner RTU

: Focus GC 55 Glass & Window Cleaner RTU SECTION 1: Identification 1.1. Identification Product form Product name Revision date: 04/15/2015 : Mixture Product code : 2105-2124 : 1.2. Relevant identified uses of the substance or mixture and uses

More information

: Aluminum Oxide Convolute Wheel

: Aluminum Oxide Convolute Wheel SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Aluminum Oxide Convolute Wheel 1.2. Relevant identified uses of the substance or

More information

Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 5019SDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture Product code : 80324 : 1.2. Relevant identified uses

More information

: Neem Oil Fungicide Miticide Insecticide RTU

: Neem Oil Fungicide Miticide Insecticide RTU SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product code : 70051134 : 1.2. Relevant identified uses of the substance or mixture

More information

3.1. Substance Not applicable 3.2. Mixture Name Product identifier % Classification (GHS-US)

3.1. Substance Not applicable 3.2. Mixture Name Product identifier % Classification (GHS-US) s SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Brass Wire 1.2. Relevant identified uses of the substance or mixture and uses

More information

: Lesco Spreader Sticker

: Lesco Spreader Sticker 5001SDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture Product code : 80310 : 1.2. Relevant identified uses

More information

: Alere BinaxNOW RSV Card Device

: Alere BinaxNOW RSV Card Device Device SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : 1.2. Relevant identified uses of the substance or mixture and uses advised

More information

: Foremost Lactose Monohydrate, NF

: Foremost Lactose Monohydrate, NF Foremost Lactose Monohydrate, NF Revision date: 01/22/2013 : Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Substance

More information

: Type 302 Stainless Steel Wire Brushes

: Type 302 Stainless Steel Wire Brushes SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Type 302 Stainless Steel Wire Brushes 1.2. Relevant identified uses of the substance

More information

P103 - Read label before use P233 - Keep container tightly closed

P103 - Read label before use P233 - Keep container tightly closed Date of issue: 11/18/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Substance name : Activated Carbon CAS No : 7440-44-0 1.2.

More information

SECTION 2: HAZARDS IDENTIFICATION Classification of the Substance or Mixture Classification (GHS-US) Not classified

SECTION 2: HAZARDS IDENTIFICATION Classification of the Substance or Mixture Classification (GHS-US) Not classified Revision Date: 09/08/2014 Date of issue: 09/08/2014 Version: 1.0 SECTION 1: IDENTIFICATION Product Identifier Product Form: Fabric Product Name: Oil-Only Sorbent Product Code: All M, OSW, OBW, OPW, OS,

More information

: Warp Drive WB Low Cure Additive

: Warp Drive WB Low Cure Additive SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture : Warp Drive WB Low Cure Additive 1.2. Relevant identified

More information

: SSC (Sodium Chloride-Sodium Citrate ) [20X]

: SSC (Sodium Chloride-Sodium Citrate ) [20X] SECTION 1: Identification 1.1. Identification Product form Product name Date of issue: 06/03/2013 Revision date: 05/26/2016 Version: 2.0 : Mixtures : Product code : 400S, R019, R020. 786-023 1.2. Recommended

More information

: Sodium Acetate, 0.2M (0.2N)

: Sodium Acetate, 0.2M (0.2N) Date of issue: 01/13/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Sodium

More information

: H317 - May cause an allergic skin reaction. : Contains isocyanates. See information supplied by the manufacturer.

: H317 - May cause an allergic skin reaction. : Contains isocyanates. See information supplied by the manufacturer. Date of issue: 11/02/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : AUTO FLEX MATTE ACTIVATOR : CT03 HS 1.2. Relevant identified uses

More information

: Sodium Acetate, Trihydrate

: Sodium Acetate, Trihydrate Date of issue: 12/10/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Substance Substance name : Sodium Acetate,

More information

: Barrier Gel. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

: Barrier Gel. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification Date of issue: 2/19/2015 Version: 6 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture : Barrier Gel 1.2. Relevant

More information

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY Revision Date: 03/07/2014 Date of issue: 03/07/2014 Version: 1.0 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY Product Identifier Product Form: Mixture Product Name: Product Code:

More information

: Calendula Oil Extract

: Calendula Oil Extract Date of issue: 07/01/2014 Revision date: 07/17/2014 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : Product

More information

CLEANING THE WORLD WITH ACTIVATED CARBON

CLEANING THE WORLD WITH ACTIVATED CARBON CLEANING THE WORLD WITH ACTIVATED CARBON Section 1 - Identity MATERIAL SAFETY DATA SHEET Identity (As Used on Label and List): GC Activated Carbon (Including, but not limited to GC C-40, GC 4 x 8B, GC

More information

: TRYPTIC SOY BROTH. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

: TRYPTIC SOY BROTH. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification Revision date: 04/17/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Trade name : Substance : TRYPTIC SOY BROTH

More information

92699, 92708, 92732, 53825, 53810, 53625. : D-55Y Yellow UV Leak Detection Dye Concentrate

92699, 92708, 92732, 53825, 53810, 53625. : D-55Y Yellow UV Leak Detection Dye Concentrate Revision date: : Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Trade name Product code : D-55Y : D-55Y 1.2. Relevant identified

More information

: Tripoli Buffing Compound

: Tripoli Buffing Compound SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Tripoli Buffing Compound 1.2. Relevant identified uses of the substance or mixture

More information

SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Not classified

SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Not classified SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Article Product Name: Signode Tenax Polyester Plastic Strapping Synonyms: Tenax Polyester (PET) Strapping 1.2. Intended Use of the Product

More information

: Microscope Slide containing Various Human or Animal Blood samples

: Microscope Slide containing Various Human or Animal Blood samples Microscope Slide containing Various Human or Animal Blood Date of issue: 01/06/2015 Revision date: 01/12/2015 Version: 1.2 SECTION 1: Identification of the substance/mixture and of the company/undertaking

More information

: HEPES, 1M BUFFER SOLUTION

: HEPES, 1M BUFFER SOLUTION Revision date: 07/21/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Trade name Product code : HEPES, 1M BUFFER SOLUTION : AB06021

More information

3.1. Substance Not applicable 3.2. Mixture Name Product identifier % Classification (GHS-US)

3.1. Substance Not applicable 3.2. Mixture Name Product identifier % Classification (GHS-US) SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Bronze Wire 1.2. Relevant identified uses of the substance or mixture and uses advised

More information

SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification Date of issue: 12/31/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : AB PROSHINE 25 Product

More information

: Sodium Bicarbonate, Saturated

: Sodium Bicarbonate, Saturated Date of issue: 01/22/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Sodium

More information

: ULTRA LOW VOC ECOLOGIC WB GLOSS LEVEL 5 SEMI GLOSS DEEP BASE

: ULTRA LOW VOC ECOLOGIC WB GLOSS LEVEL 5 SEMI GLOSS DEEP BASE ULTRA LOW VOC ECOLOGIC WB GLOSS LEVEL 5 SEMI GLOSS SECTION 1: Identification 1.1. Identification Product form Product name : Mixture Product code : 70621 : ULTRA LOW VOC ECOLOGIC WB GLOSS LEVEL 5 SEMI

More information

SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substances Not applicable 3.2. Mixture

SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substances Not applicable 3.2. Mixture Revision Date: 05/19/2015 Date of issue: 05/19/2015 Version: 1.0 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Mixture Product Name: 10X Spheroid Formation ECM Product Code: 3500-096-01

More information

advice (show the label where possible).

advice (show the label where possible). Revision date: 10/22/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : Product code : 80269 1.2. Relevant

More information

Graffiti Remover Safety Data Sheet

Graffiti Remover Safety Data Sheet SECTION 1: Product and company identification Product name : Graffiti Remover Use of the substance/mixture : Premoistened wipe Product code : 1447 Company : Four Star Chemical 3137 East 26th Street Vernon,

More information

: LOW VOC ECOLOGIC COLOUR COAT, GLOSS LEVEL 2, RED TINT BASE

: LOW VOC ECOLOGIC COLOUR COAT, GLOSS LEVEL 2, RED TINT BASE LOW VOC ECOLOGIC COLOUR COAT, GLOSS LEVEL 2, RED TINT SECTION 1: Identification 1.1. Identification Product form Product name : Mixture Product code : 70633 : LOW VOC ECOLOGIC COLOUR COAT, GLOSS LEVEL

More information

: 1-Amino-2-Naphthol-4-Sulfonic Acid

: 1-Amino-2-Naphthol-4-Sulfonic Acid 75502 Date of issue: 09/28/2007 Revision date: 06/20/2013 Supersedes: 09/28/2007 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product

More information

20/20 EFP Window Cleaner Item Series No

20/20 EFP Window Cleaner Item Series No SAFETY DATA SHEET Revision date: 05/19/2015 Section 1 Identification of the Substance/Mixture and of the Company/Undertaking 1.1 Product Identifier Product Form: Mixture Product Name: 20/20 EFP Window

More information

: Potassium Chloride, Saturated

: Potassium Chloride, Saturated Date of issue: 12/10/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Potassium

More information

Abrasive Flap Disc - Glass Fibre Backed Safety Data Sheet

Abrasive Flap Disc - Glass Fibre Backed Safety Data Sheet SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name 1.2. Relevant identified uses of the substance or mixture and uses advised against

More information

: Silicon Carbide Convolute Wheel

: Silicon Carbide Convolute Wheel SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Silicon Carbide Convolute Wheel 1.2. Relevant identified uses of the substance or

More information

SECTION 1: IDENTIFICATION SECTION 2: HAZARDS IDENTIFICATION SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS. Product Identifier

SECTION 1: IDENTIFICATION SECTION 2: HAZARDS IDENTIFICATION SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS. Product Identifier Date of issue: 8/24/2016 Revision Date: 8/24/2016 SECTION 1: IDENTIFICATION Product Identifier Product Name: EJ-299-34 Plastic Scintillator Product Form: Article Intended Use of the Product Radiation detection

More information

Graffiti Wipes Safety Data Sheet

Graffiti Wipes Safety Data Sheet SECTION 1: Product and company identification Product name : Graffiti Wipes Use of the substance/mixture : Premoistened wipe Product code : 1447 Company : Total Solutions P.O. Box 245013 Milwaukee, WI

More information

Reagent R1, Reagent R2, Calibrators and Controls

Reagent R1, Reagent R2, Calibrators and Controls Date of issue: 06/02/2015 Date of Revision: 06/04/2015 Revision: B SECTION 1 Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product

More information

SAFETY DATA SHEET. 955 Connecticut Ave, Suite 5202 Bridgeport, CT 06607 Tel: 800-242-1150 www.carbtrol.com Date Prepared: July 22, 2015

SAFETY DATA SHEET. 955 Connecticut Ave, Suite 5202 Bridgeport, CT 06607 Tel: 800-242-1150 www.carbtrol.com Date Prepared: July 22, 2015 CARBTROL C O R P O R A T I O N SAFETY DATA SHEET Section 1 Identity Identity (As Used on Label and List): Carbtrol Type: CSV, CV, CSL, CL, CAT2 Manufacturers Name: Carbtrol Corporation 955 Connecticut

More information

Calcium Chloride Emergency Telephone Number

Calcium Chloride Emergency Telephone Number According To Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules And Regulations Revision Date: 15/April/2016 Version: 1.0 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form:

More information

Foremost Grade AA Butter -- Salted

Foremost Grade AA Butter -- Salted Foremost Grade AA Butter -- Salted According to Federal Register / Vol. 77, No. 58/ Monday, March 26, 2012/ Rules and Regulations Revision Date: 01/15/2015 : Version: 1.1 SECTION 1 : Identification of

More information

3.1. Substance Not applicable 3.2. Mixture Name Product identifier % Classification (GHS-US)

3.1. Substance Not applicable 3.2. Mixture Name Product identifier % Classification (GHS-US) SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Buffing Compound 1.2. Relevant identified uses of the substance or mixture and uses

More information

: Calcium Citrate Malate

: Calcium Citrate Malate Date of issue: 06/01/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Trade name Chemical name : Substance : Calcium Citrate Malate

More information

: Sodium Chloride, 0.025N (0.025M)

: Sodium Chloride, 0.025N (0.025M) Date of issue: 07/30/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Sodium

More information

Bio Tread - Hard-Surface Cleaner Safety Data Sheet

Bio Tread - Hard-Surface Cleaner Safety Data Sheet SECTION 1: Product and company identification Product name : Bio Tread - Hard-Surface Cleaner Use of the substance/mixture : Cleaner Bacterial digestant Product code : 0526 Company : Total Solutions P.O.

More information

: KITCHEN & BATH ULTRA LOW VOC WB PEARL WHITE BASE

: KITCHEN & BATH ULTRA LOW VOC WB PEARL WHITE BASE KITCHEN & BATH ULTRA LOW VOC WB PEARL WHITE BASE SECTION 1: Identification 1.1. Identification Product form Product name : Mixture Product code : 03620 : KITCHEN & BATH ULTRA LOW VOC WB PEARL WHITE BASE

More information

Candelilla Wax Safety Data Sheet

Candelilla Wax Safety Data Sheet Candelilla Wax Safety Data Sheet SECTION 1: Identification of the substance/mixture and of the company/undertaking Product name: Candelilla Wax Product code: 301-127X Supplier: Majestic Mountain Sage Inc

More information

: Methyl Orange, 0.05% Aqueous

: Methyl Orange, 0.05% Aqueous Date of issue: 01/31/2014 Revision date: 05/20/2014 Supersedes: 01/31/2014 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product

More information

: SELECT GH contains a source of live (viable) naturally occurring microorganisms for all classes of livestock and poultry feeds.

: SELECT GH contains a source of live (viable) naturally occurring microorganisms for all classes of livestock and poultry feeds. Date of issue: 06/30/2016 Revision date: 06/30/2016 Version: 1.0 SECTION 1: Identification 1.1. Identification Product form : Mixture 1.2. Relevant identified uses of the substance or mixture and uses

More information

: Water Soluble Dye Tracer

: Water Soluble Dye Tracer Date of issue: 05/12/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Water Soluble Dye

More information

: Water and Glycol Leak Detection Solution

: Water and Glycol Leak Detection Solution Water and Glycol Leak Detection Solution Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Date of issue: 05/05/2015 Version: 1 SECTION

More information

Main Drain Opener Safety Data Sheet

Main Drain Opener Safety Data Sheet SECTION 1: Product and company identification Product name : Main Drain Opener Use of the substance/mixture : Drain opener Product code : 0253 Company : Ecoworks 47 Heisser Court Farmingdale, NY 11735

More information

Calendula Extract Safety Data Sheet

Calendula Extract Safety Data Sheet Calendula Extract Safety Data Sheet SECTION 1: Identification of the substance/mixture and of the company/undertaking Product name: Calendula Extract Product code: 305-109 Supplier: Majestic Mountain Sage

More information

: Magnesium ascorbate

: Magnesium ascorbate Date of issue: 06/01/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Trade name Chemical name : Substance : Magnesium Ascorbate

More information

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY Revision Date: 11/06/2013 Supersedes: 09/12/2013 Version: 1.0 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY 1.1. Product Identifier Product Form: Substance Product Name: Coconut

More information

: FOUR SEASONS ESTER OIL 55 GL

: FOUR SEASONS ESTER OIL 55 GL Revision date: 08/23/2013 : Version: SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Trade name CAS No : Mixture : FOUR SEASONS ESTER

More information

2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) :

2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) : Revision Date: 09/02/2014 Date of issue: 09/02/2014 Version: 1.0 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Name: Formula: Southern Yellow Pine, consisting of Loblolly, Long Leaf, and Short

More information

: Magnesium Sulfate, Heptahydrate

: Magnesium Sulfate, Heptahydrate Date of issue: 02/20/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Substance Substance name : Magnesium Sulfate,

More information

: Bromothymol Blue, Sodium Salt, ACS

: Bromothymol Blue, Sodium Salt, ACS SECTION 1: Identification 1.1. Identification Product form Substance name Chemical name Bromothymol Blue, Sodium Salt, ACS Date of issue: 10/24/2007 Revision date: 12/19/2016 Supersedes: 05/18/2015 Version:

More information

: Arabinoxylan (Wheat Flour; Insoluble)

: Arabinoxylan (Wheat Flour; Insoluble) Date of issue: 06/09/2016 Revision date: 06/09/2016 Supersedes: 22/01/2014 Version: 1.2 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product

More information

: Cresol Red, Sodium Salt

: Cresol Red, Sodium Salt Date of issue: 12/23/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Substance Substance name : Cresol Red, Sodium

More information

: Silicon Carbide Resinoid Bonded Cutting Grinding Wheel

: Silicon Carbide Resinoid Bonded Cutting Grinding Wheel Silicon Carbide Resinoid Bonded Cutting Grinding Wheel SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Silicon Carbide Resinoid

More information

Ross Leather Dressing Item # MLD

Ross Leather Dressing Item # MLD SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Ross Leather Dressing (MLD) 0.75 oz. 1.2. Relevant identified uses of the substance

More information

: Thymol Blue, 0.04% Aqueous

: Thymol Blue, 0.04% Aqueous Date of issue: 08/21/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Thymol

More information

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY Revision Date: 11/06/2013 Supersedes: 09/11/2013 Version: 1.0 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY 1.1. Product Identifier Product Form: Substance Product Name: Phenoxyethanol

More information

(CAS No) 55965-84-9 0.003 Skin Irrit. 2, H315 Eye Irrit. 2A, H319 Skin Sens. 1, H317. 09/24/2015 EN (English US) 1/1 GHS07

(CAS No) 55965-84-9 0.003 Skin Irrit. 2, H315 Eye Irrit. 2A, H319 Skin Sens. 1, H317. 09/24/2015 EN (English US) 1/1 GHS07 Revision Date: 09/24/2015 Date of issue: 09/24/2015 Version: 2.0 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Name: Product Code: 1431-31,1432-31, 1431-32,1432-32 1.2. Intended Use of the

More information

: Sealer. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

: Sealer. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification Date of issue: 15/02/2016 Revision date: 05/08/2016 Supersedes: 17/05/2016 Version: 8561.8 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product

More information

: Sodium Bicarbonate-Sodium Chloride Solution

: Sodium Bicarbonate-Sodium Chloride Solution Date of issue: 01/22/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Sodium

More information

Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Date of issue: 06/01/2015

Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Date of issue: 06/01/2015 Date of issue: 06/01/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Substance name Chemical name : Substance : Manganese Lactate

More information

: Benefect Botanical Impact Cleaner

: Benefect Botanical Impact Cleaner Date of issue: 05/26/2015 Revision date: 05/26/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product code : :

More information

Product code: gal / gal / gal

Product code: gal / gal / gal Date of issue: 02/01/2016 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name & Product code : GemSeal Tack Coat Asphalt

More information

: FOSINOPRIL IMPURITY I CRS

: FOSINOPRIL IMPURITY I CRS in accordance with Regulation (EC) No. 1907/2006, as amended. Date of issue: 27/06/2013 Revision date: 27/06/2013 Supersedes: 27/11/2009 Version: 3.0 SECTION 1: Identification of the substance/mixture

More information

: Bromothymol Blue-Phenol Red, Mixed Indicator

: Bromothymol Blue-Phenol Red, Mixed Indicator Date of issue: 08/13/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Bromothymol

More information

3.2. Mixture Name Product identifier % Classification according to Directive 67/548/EEC

3.2. Mixture Name Product identifier % Classification according to Directive 67/548/EEC Date of issue: 3/31/2016 Revision date: 3/31/2016 Supersedes: Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Trade name

More information

: Bromophenol Blue, Sodium Salt, ACS

: Bromophenol Blue, Sodium Salt, ACS Date of issue: 01/31/2014 Revision date: 05/13/2015 Supersedes: 01/31/2014 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product

More information

: Lead X Pro. Safety Data Sheet Date of issue: 11/23/2016 Version: 1.22

: Lead X Pro. Safety Data Sheet Date of issue: 11/23/2016 Version: 1.22 Date of issue: 11/23/2016 Version: 1.22 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : Lead X Pro Product

More information

: DOMPERIDONE MALEATE CRS

: DOMPERIDONE MALEATE CRS in accordance with Regulation (EC) No. 1907/2006, as amended. Date of issue: 27/06/2013 Revision date: 27/06/2013 Supersedes: 25/11/2009 Version: 6.0 SECTION 1: Identification of the substance/mixture

More information

Alere BinaxNOW RSV Card

Alere BinaxNOW RSV Card Date of issue: 13 MAY 2015 Revision date: 13 MAY 2015 : Version: 13 MAY 2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Alere

More information

: X-PANDO PIPE JOINT COMPOUND

: X-PANDO PIPE JOINT COMPOUND Revision date: 4/19/2013 : Version: SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name. : X-PANDO PIPE JOINT COMPOUND 1.2. Relevant identified

More information

: EDTA, 0.01M (0.02N)

: EDTA, 0.01M (0.02N) Date of issue: 12/10/2013 Revision date: 01/17/2017 Supersedes: 12/10/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : : LC13850 1.2.

More information

: Sodium Thiosulfate, 0.1N (0.1M)

: Sodium Thiosulfate, 0.1N (0.1M) Date of issue: 07/10/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. Product code : Mixture : Sodium

More information

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY Revision Date: 06/04/2014 Version: 1.0 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY Product Identifier Product Form: Mixture Product Name: Vintage Bluing Product Code: SL102, SL105

More information

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY Date of Issue: 06/10/2016 Supersedes: 03/19/2015 Version: 1.0 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY 1.1. Product Identifier Product Form: Substance Product Name: Castor

More information

: NxGen T7 RNA Polymerase

: NxGen T7 RNA Polymerase Revision date: 03/09/2016 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : NxGen T7 RNA Polymerase Product form : Mixtures

More information

: Log Jam. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

: Log Jam. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification Date of issue: 08/28/2015 Revision date: 08/28/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product code : Log

More information

: Ethidium Bromide Solution

: Ethidium Bromide Solution Date of issue: 08/03/2015 Revision date: 08/12/2015 Version: 2.1 SECTION 1: Identification 1.1. Identification Product form Product name. Product code : Mixtures : Ethidium Bromide Solution : R034, R041,

More information

: Excyte Plastic ESR Vacuum Tubes

: Excyte Plastic ESR Vacuum Tubes SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Excyte Plastic ESR Vacuum Tubes Excyte Plastic ESR High Altitude Vacuum Tubes : EP 10605 EP 10605 H1 1.2.

More information

Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product code : 272 : Bonide Stump Out 1.2. Relevant identified uses of the substance

More information