hydraulic hoses, couplings & equipment the world of Hose

Size: px

Start display at page:

Download "hydraulic hoses, couplings & equipment the world of Hose"

Mercy Cobb
7 years ago
Views:

1 hydraulic hoses, couplings & equipment the world of Hose Engine Hose

2 Coolant Blue Stripe Blue Stripe 3/4 -size DN " " mm PSI MPa PSI MPa kg/100m REF / BLUE STRIPE 3/8" / BLUE STRIPE 1/2" / BLUE STRIPE 5/8" / BLUE STRIPE 3/4" / BLUE STRIPE 7/8" BLUE STRIPE 1" / BLUE STRIPE 1 1/8" / BLUE STRIPE 1 1/4" / BLUE STRIPE 1 1/2" / BLUE STRIPE 1 3/4" BLUE STRIPE 2" / BLUE STRIPE 2 1/4" high temperature coolant, water and air applications. ecr EPDM. -4 to -12 and -16: 4230SB - aramid spiral; -14 and -18 to -36: 4175SC - nylon cord. epdm based. -40 C to +150 C continuous service. 4230SB - normal duty heater hose to SAE 20R3 EC Class D SC - heavy duty radiator hose to SAE 20R1 EC Class D-1. Compounded to resist electro-chemical degradation, the leading cause of hose failure. Note also available as customer-made curved hose to SAE 20R4 EC D-1 to fit specific applications and meeting customer specifications. Curved hose recommended for upper, lower, by-pass, heater and other coolant applications. Can be installed without buckling, bending out of shape or straining at the connections. 56 the world of hose

1 62 BLUE STRIPE 7/8" -16 25 1 1.34 34.0 44 0.3 175 1.2 49 BLUE STRIPE 1" -18 28 1.1/8 1.55 39.4 125 0.9 500 3.4 76 BLUE STRIPE 1 1/8" -20 31 1.1/4 1.67 42.4 100 0.7 400 2.

3 Fuel 4219BG Barricade Greenshield BARRICADE GreenShield FUEL HOSE 5/16 (7.9 mm) SAE J30R14T1 Not For Fuel Injection Systems -size DN " " mm PSI MPa PSI MPa mm/hg kg/100m REF / BG 1/4" / BG 5/16" / BG 3/8" Barrier low permeation engine application equipped with a conventional carburettor, including cars, ATV s, trucks, tractors and lawn and garden equipment for a wide range of fuel types. eco based. nylon liner. synthetic high tensile textile. csm (Chlorosulfinated polyethylene) based. -40 C to +125 C continuous service. california Air Resources Board (CARB) emission requirements for small off-road vehicles. U.S. EPA emission requirements 40 CFR for recreational vehicle engines. Exceeds SAE J30R14 T1 specification. Permeation rate less than 15g/m 2 /day at 40 C. can handle almost any type of fuel including gasohol, diesel, ethanol, methanol, sour gas, and biodiesel up to B100. the world of hose 57

7 610 12 4219BG 1/4" -5 8 5/16 0.56 14.3 50 0.7 610 15 4219BG 5/16" -6 10 3/8 0.63 15.9 50 0.

4 Fuel 4219G 4219G FUEL LINE 5/16 (7.9 mm) SAE 30R7 Not For Fuel Injection Systems -size DN " " mm PSI MPa PSI MPa mm/hg kg/100m REF / G 3/16" / G 1/4" / G 5/16" / G 3/8" / G 1/2" / G 5/8" clamped hose applications for low pressure and return lines on fuel systems. Specially designed for fuel circuits (leaded and unleaded petrol, diesel) in passenger cars and industrial vehicles. It can also be used in evaporative emission control systems and as a vent line. nbr (Nitrile) based. synthetic high tensile textile. nbr/pvc based. -40 C to +125 C continuous service. exceeds the requirements of SAE 30R6 and SAE 30R7 specifications for fuel line hoses. Materials used in manufacturing this hose will not discolour fuels or contaminate fuel systems. also used for crankcase ventilation. Important not recommended for fuel injection systems. 58 the world of hose

2 250 24 4219G 1/2" -10 16 5/8 0.94 23.9 35 0.2 175 1.2 250 34 4219G 5/8" clamped hose applications for low pressure and return lines on fuel systems.

5 Airco PolarSeal 12AC134A PolarSeal 3.5 MPa (500 PSI) 5/8 (16.0 mm) SAE J2064 Type C Class II -size DN " " mm PSI MPa PSI MPa mm/hg kg/100m REF / AC134A 13/ AC134A / AC134A / AC134A Barrier use in automotive air conditioning and industrial systems. Designed for environmentally safe R134a refrigerants in both liquid and gaseous condition. cr (Chloroprene) based. nylon liner. two layers of spiral polyester. epdm based. -30 C to +125 C continuous service. meets or exceeds SAE J2064 Type C, Class 2. Minimises permeation of both R134a and R12 refrigerants. the world of hose 59

Designed for environmentally safe R134a refrigerants in both liquid and gaseous condition. cr (Chloroprene) based. nylon liner. two layers of spiral polyester. epdm based.

6 Power steering PS188 6PS188 POWER STEERING 10.5 MPa (1500 PSI) 3/8 (9.5 mm) 300 F -size DN " " mm PSI MPa PSI MPa kg/100m REF / PS188 power steering pressure lines. Synthetic rubber hose cover developed to resist rugged under-hood environments. csm (Chlorosulfinated polyethylene) based. two high strength nylon braids. csm (Chlorosulfinated polyethylene) based. -40 C to +150 C. meets SAE J2050 Type 1 performance requirements. Specially designed reinforcement resists high temperatures and allows expansion for system noise dampening. 60 the world of hose

csm (Chlorosulfinated polyethylene) based. two high strength nylon braids. csm (Chlorosulfinated polyethylene) based. -40 C to +150 C.

HOSE AND TUBING CATALOGUE SOLD BY THE ROLL OR IN INCREMENTS OF 1M, STANDARD COIL LENGTH 30 METRES. SIZE (I.D x WALL) CODE SIZE (I.

HOSE AND TUBING CATALOGUE SOLD BY THE ROLL OR IN INCREMENTS OF 1M, STANDARD COIL LENGTH 30 METRES. SIZE (I.D x WALL) CODE SIZE (I. FUEL LINE Temperature: -40 C to +125 C continuous service. Tube: Type C (Nitrile). Black. Oil and petrol resistant. Reinforcement: Single ply of synthetic fibre. Cover: Type C2 (NBR/PVC). Black. Fuel,