Compact Cylinder. With a short overall length, the space-saving cylinder helps to make various jigs and equipment more compact.

Transcription

1 ompact ylinder Series ø, ø, ø, ø, ø, ø, ø, ø3, ø, ø, ø, ø1, ø, ø1, ø With a short overall length, the space-saving cylinder helps to make various jigs and equipment more compact. Series Variations Series ction od Standard stroke Page Standard ouble acting ouble rod W ø, ø/ to 3 ø, ø/ to ø, ø/ to ø to ø/ to ø, ø/ to 3 ø, ø/ to ø, ø/ to ø to ø/ to 3 Single acting Spring return/ Spring extend ø to ø/, ø/, 3 arge ore Size ouble acting ouble rod W to 3 to 3 J ong Stroke Non-rotating od ouble acting ouble acting K ouble rod KW to 3 ø, ø/ to 3 ø, ø/ to ø, ø/ to ø, ø3/ to ø, ø/ to 3 ø, ø/ to ø, ø3/ to 3 QS Q Q xial Piping (entralized Piping Type) ouble acting QP ø, ø/ to 3 ø, ø/ to ø, ø/ to ø to ø/ to U Single acting Spring return/ Spring extend QP ø to ø/, ø/, nti-lateral oad ouble acting S ø to ø/ to ø to ø/ to 3 With nd ock ouble acting Q ø to ø3/ to ø, ø/ to 3 Water resistant ouble ø, ø/ to acting ø, ø/ to V ø to ø/ to Smooth cylinder (ow friction) Y efer to est Pneumatics No. 3. ow-speed cylinder X efer to est Pneumatics No. 3. ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () -- -

2 ombinations of Standard Products and ade Series to Order Specifications Series : Standard : ade to Order specifications : Special product (ontact S for details.) : Not available Series ction/ Type ouble acting (Standard) ouble rod Single acting / / Spring return Spring extend (arge bore size) ouble acting ouble rod (ong stroke) ouble acting K (Not-rotating) ouble acting ouble rod ouble acting QP (xial piping) Single acting / / Spring return Spring extend S (nti-lateral load) ouble acting Q (nd lock) ouble acting QSY () X () Smooth cylinder (ow friction) ow-speed cylinder ouble acting ouble acting Symbol Standard G H -, - - V X X X X X X X X X X X X X Specification Standard uilt-in magnet oth ends tapped With rubber bumper With boss in head side With one-touch fittings oot/lange style ouble clevis shape ir-hydro type lean series opper and luorine-free Water resistant Heat-resistant cylinder ( to 1 ) old-resistant cylinder ow-speed cylinder ( to mm/s) Intermediate stroke (Using exclusive body) ow-speed cylinder ( to mm/s) ylinder with heat resistant auto switch With heavy duty scraper ade of stainless steel (od, retaining ring, rod end nut stainless steel) djustable stroke cylinder/djustable extension type djustable stroke cylinder/djustable retraction type ual stroke cylinder/ouble rod type ual stroke cylinder/ type ouble clevis pins including copper pins and flat washer pplicable bore size ø to ø ø to ø ø to ø3 ø to ø ø to ø ø to ø ø to ø ø to ø ø to ø ø to ø ø to ø ø to ø ø to ø3 ø to ø ø to ø ø to ø ø to ø ø to ø ø to ø () () () () ø to ø ø to ø3 ø to ø ø to ø ø to ø ø to ø () () () (1) (1) () () () () () () () () (3) (3) (3) () () () () () () ø to ø () J QS Q Q X ouble clevis pins and ouble knuckle pins made of stainless steel (Stainless steel 3) ø to ø U X3 X3 X X With coil scraper With boss on rod side hange of port position imensions same as Series Q1 ø to ø ø to ø ø to ø ø to ø () () () X3 dimension from the rod cover is the same as Series Q1 ø to ø X3 hange of piston rod end of double rod cylinder ø to ø X X3 luororubber seals imensions same as Series Q1W ø to ø () () X ong stroke of adjustable extension stroke cylinder (X) ø to ø () X X33 X3 X1 ong stroke of adjustable retraction stroke cylinder (X) Intermediate stroke of double rod type ong stroke of dual stroke single rod With concave shape end boss on the cylinder tube head side ø to ø ø to ø ø to ø Note 1) ubber bumper is a standard for ø with an auto switch. Note ) ubber bumper is a standard. Note 3) ø to ø: ( ), for ø to ø only (up to ø for the single acting type) Note ) ø to ø: ( ), for ø to ø3 only Note ) ø: ( ) Note ) ø to ø: ( ), for ø to ø only () Note ) ø to ø: ( ), for ø to ø only Note ) od end lock: ( ), for head end lock only Note ) Head end lock: ( ), for rod end lock only () Note ) type with boss on rod side is a standard. Note ) ø1 to ø: ( ), for ø to ø only Note ) efer to est Pneumatics No. 3 for smooth cylinder (low friction) and lowspeed cylinder. 1 - ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () --

3 ompact ylinder: Standard Type ouble cting, Single od Series ø, ø, ø, ø, ø, ø, ø, ø3, ø, ø With auto switch With auto switch (uilt-in magnet) Through-hole (Standard) oth ends tapped style oot style mm mm mm mm mm G 3 Q ounting style od side flange style Head side flange style ouble clevis style ounting brackets are shipped together, (but not assembled). ylinder mounting bolts are not included. Order them separately referring to ounting olt for on pages and. mm mm 3 mm mm mm uilt-in agnet ylinder odel If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the auto switch. (xample) Q- Nil TN T How to Order Type Nil Pneumatic H ir-hydro (1) Note 1) s available for airhydro type are ø to ø. Port thread type thread ø to ø c NPT ø to ø G uilt-in One-touch fittings () Note ) s available w/ one-touch fittings are ø to ø3. esides, it is not possible to use for air-tydro type. Note 3) T is not available for the air-hydro type. or the cylinders without an auto switch, threads are compatible only for ø with strokes. V V V, V V V, V V V, V V V,V 3 3 pplicable uto Switch/efer to pages 3 to 1 for further information on auto switches. Type Special function lectrical entry eed switch Solid state switch iagnostic indication (-color indication) Water resistant (-color indication) With diagnostic output (-color indication) agnetic field resistant (-color indication) Grommet onnector Grommet Grommet onnector iagnostic indication (-color indication) Grommet ead wire length symbols:. m Nil Indicator light Yes Yes Yes No Yes No Wiring (Output) 3-wire (NPN) 3-wire (PNP) -wire 3-wire (NPN) 3-wire (PNP) -wire 3-wire (NPN) 3-wire (PNP) -wire -wire -wire (Non-polar) 3-wire (NPN equivalent) -wire (xample) NW 1 m (xample) NW 3 m (xample) NW m Z (xample) NWZ NV PV V J NWV PWV WV NV PV V Nil W Number of auto switches ade to Order Nil pcs. (efer to page 3 S 1 pc. for details.) n n pcs. uto switch Nil Without auto switch efer to the table below for the applicable auto switch model. ody option ombination of body options (,,, ) is available. Note ) ir-hydro type with rubber bumper is not available. ction ouble acting oad voltage uto switch model ead wire length (m) Perpendicular In-line N P NW PW W N P PW. (Nil) V V V,V V V,V V V V or less V or less V 3V V 3 W H 3 Solid state auto switches marked with Standard (od end female thread) With boss in head side () With rubber bumper ylinder stroke or Standard Stroke and anufacture of intermediate of Stroke, refer to page 3. 1 () 3 () (Z) None (N) Pre-wired connector pplicable load I circuit I circuit I circuit I circuit I circuit I circuit I circuit elay, P elay, P are produced upon receipt of order. -PW type is available from ø up to ø only. Only for -PW type, an auto switch is assembled and shipped with the cylinder. None N (xample) JN There are other applicable auto switches other than the listed above. or details, refer to page. or details about auto switches with pre-wired connector, refer to pages 1 and 1. When - (V)/ (V)/ W(V)/ (V) types with ø to ø are mounted on a side other than the port side, order auto switch mounting brackets separately. efer to page for details. ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () --

4 ompact ylinder: Standard Type ouble cting, Single od Series Specifications(Pneumatic) 3 ction luid Proof pressure aximum operating pressure inimum operating pressure mbient and fluid temperature ouble acting, ir 1. Pa 1. Pa. Pa. Pa ubrication Not required (Non-lube) Piston speed to mm/s llowable kinetic Standard energy J With rubber bumper mm Note) Stroke length tolerance Note) Stroke length tolerance dose not include the amount of bumper change JIS Symbol ouble acting, JIS Symbol With boss in head side ade to Order Specifications (or details, refer to pages 3 to 1.) Symbol Specifications X hange of rod end shape X Heat resistant cylinder ( to 1 ) w/o auto switch only X old resistant cylinder ( to ) w/o auto switch only X ow speed cylinder ( to mm/s) X Intermediate stroke (Using exclusive body) X ong stroke type, ir-hydro type only X ow speed cylinder ( to mm/s) X ylinder with heat resistant auto switch ø to 3 only X With heavy duty scraper, ø to only X etaining ring, piston rod, rod end nut made of stainless steel X djustable stroke cylinder/djustable extension type X djustable stroke cylinder/djustable retraction type X ual stroke cylinder/ouble rod type X ual stroke cylinder/ type X ouble clevis pins include copper pins and a flat washer. ouble clevis pins and ouble knuckle pins made X of stainless steel (Stainless steel 3) X3 With coil scraper, ø to only X3 With boss in rod side X luoro rubber for seal/uilt-in hard plastic magnet, ø to only X Same overall length dimension as Series Q1, xcept ø, X3 Same dimension from rod cover as Series Q1, ø, only X hange of port location, with auto switch ø to only X luororubber seals X ong stroke of adjustable extension stroke cylinder (-X) X ong stroke of adjustable retraction stroke cylinder (X) X3 ong stroke of dual stroke single rod X1 With concave shape end boss on the cylinder tube head side efer to pages to for the specifications of cylinders with auto switches. inimum auto switch mounting stroke Proper auto switch mounting position (detection at stroke end) and height Operating range Switch mounting bracket: Part no. Specifications(ir-hydro) ction luid Proof pressure aximum operating pressure inimum operating pressure mbient and fluid temperature Piston speed ushion Stroke length tolerance Note) efer to ctuator/ommon Precautions () on page. anufacture of Intermediate Stroke escription Part no. escription xample Standard Stroke Pneumatic,,, to ir-hydro,,, 3,, 3 ouble acting, using spacer with standard stroke., 1 to, 1 to to 1 to Turbine oil +1.mm Note) 1. Pa 1. Pa.1 Pa.1 Pa to to mm/s None Spacer is installed in the standard stroke body. xclusive body (-X) efer to How to Order for the Suffix -X to the end of standard standard model no. on page. ealing with intermediate stroke by the 1 mm interval is available by Part No.: - 1 mm width spacer is installed in the standard -. dimension is. mm. exclusive body with the stroke., to, to, to to to Standard stroke,, 1,,, 3,, 1,,, 3, 3,,,,, 1,,, 3, 3,,,,,, 1,,, 3, 3,,,,, Standard stroke,, 1,,, 3, 3,,,,, 1,,, 3, 3,,,,,, 1,,, 3, 3,,,,, model no. on page. ealing with the stroke by the 1 mm interval by using an Part no. --X akes stroke tube. dimension is. mm. ir-hydro type is excluded. In the case of spacer type, intermediate stroke with dumper for ø to ø, it can be manufactured by mm intervals in mm and to mm. In the case of an exclusive body with ø to ø (-X) with the stroke length exceeding mm, the reference values of the longitudinal dimension will be changed. alculate length dimensions by deducting from those of or mm stroke models. egarding the long stroke which exceeds the stroke range, refer to page 1 for the long stroke type of either QS or. When stroke exceeds the standard range, refer to page. ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () J QS Q Q U -

5 Series Type ounting racket Part No. ir-hydro Pneumatic Through-hole (Standard) ounting oth ends tapped style uilt-in magnet Piping Screw-in type TN T uilt-in One-touch fittings With rubber bumper With boss in head side Through-hole (Standard) ounting oth ends tapped style uilt-in magnet Piping Screw-in type TN With boss in head side x. x. x. x. x. x. x. (1) c1/ x. (1) c1/ c 1/ c 1/ c 1/ c 1/ c 1/ c 1/ c 3/ c 3/ c 3/ c 3/ 3 oot () Q- Q- Q- Q- Q- Q- Q- Q-3 Q- Q- lange Q- Q- Q- Q- Q- Q- Q- Q-3 Q- Q- ouble clevis Q- Q- Q- Q- Q- Q- Q- Q-3 Q- Q- Note ) When ordering foot bracket, order pieces per cylinder. Note ) Parts belonging to each bracket are as follows. oot, lange: ody mounting bolt/ouble clevis: levis pin, Type retaining ring for axis, body mounting bolt Note 1) or a ø cylinder without an auto switch, x. is used for -stroke piping dimension. Thus, do not enter a symbol for the port tread type. Note ) In the case of built-in fitting, the mm stroke with ø bore is the same external dimensions as mm stroke. Note 3) One-touch fittings cannot be replaced. Precautions e sure to read before handling. efer to front matters and for Safety Instructions and pages 3 to for ctuator and uto Switch Precautions. etaining ing Installation/emoval aution 1. or installation and removal, use an appropriate pair of pliers (tool for installing a type retaining ring).. ven if a proper plier (tool for installing type retaining ring) is used, it is likely to inflict damage to a human body or peripheral equipment, as a retaining ring may be flown out of the tip of a plier (tool for installing a type retaining ring). e much careful with the popping of a retaining ring. esides, be certain that a retaining ring is placed firmly into the groove of rod cover before supplying air at the time of installment. aution ounting Series compact cylinders are designed to create compact mechanical equipment and promote space saving. Thus, if it is used in the same manner as conventional cylinders such as tierod cylinders, it may degrade the performance. Pay sufficient attention to the operating conditions when using. (1) llowable lateral load ateral load that can apply to the piston rod end is limited. If a cylinder is used with a lateral load over the limit, it may cause air leakage due to abnormal friction of seals, galling of cylinder tubes and pistons, or abnormal friction of the bearing part. The lateral load applied to the piston must be within the allowable range indicated in this catalog. When the load exceeds the limit, use a double rod cylinder, install a guide, or change the bore size to suit the load in order to make the load within the allowable range. s a standard product, a lateral load resistant type that is resistant to approx. times more than the conventional compact series is also available (pages 3 to 33). aution ounting () onnection with workpiece When a workpiece is mounted on the piston rod end, connect them aligning the center of piston rod and workpiece. If they are off-center, lateral load is generated and phenomena mentioned in (1) may occur. In order not to apply the off-center load, use of a floating joint or simple joint is recommended. (3) Simultaneous use of multiple cylinders It is difficult to control the speed of pneumatic cylinders. The following conditions cause speed change: change in supply pressure, load, temperature and lubrication, performance difference of each cylinder, deterioration of each part over time, etc. speed controller can be used to control the speed of multiple cylinders simultaneously for a short period of time, but depending on conditions, it may not work as desired. If multiple cylinders cannot operate simultaneously, unreasonable force is applied to the piston rod because cylinder positions may not be the same. This may cause abnormal friction of seals and bearings, and galling of cylinder tubes and pistons. o not use an application to operate several cylinders simultaneously by adjusting cylinder speed. If this is inevitable, use a high rigid guide against load, so that the cylinder is not damaged even when the each cylinder output is slightly different. ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () --

6 ompact ylinder: Standard Type ouble cting, Series llowable Kinetic nergy Table (1) oad ass and Piston Speed. Standard llowable kinetic energy: a With rubber bumper llowable kinetic energy: b Table () ass of ylinder ovable Parts/Without uilt-in agnet ylinder stroke ylinder stroke Table (3) ass of ylinder ovable Parts/With uilt-in agnet Table () od end male thread Thread Nut With rubber bumper 3 3 alculation: (xample) Q- ylinder mass: Q- 1 g Option mass: 3 g With rubber bumper 3 g 1 g Kinetic energy (J)= (m1+m)v m1: Weight of cylinder operating part kg m: oad mass kg V : Piston speed m/s [J] (g) (g) 3 (g) 1 1 llowable ateral oad at od nd Without uto Switch llowable lateral load for rod end (N) With uto Switch llowable lateral load for rod end (N) ø ø ø ø ø ø ø ø 1. W ø ø ø3 ø ø ø ylinder stroke llowable lateral load for rod end (, without switch) ø ø ø3 ø ø ø ylinder stroke llowable lateral load for rod end (, with switch) If an allowable lateral load at rod end is exceeding the value in the graph, we recommend anti-lateral load type cylinder be used. (ounting orientation: Horizontal) J QS Q Q U - ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () --

7 Series Theoretical Output 3 Operating direction IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT (N) Operating pressure (Pa) ounting olt for /Without uto Switch ounting method: ounting bolt for through-hole mounting style of is available as an option. Ordering: dd the word olt in front of the bolts to be used. xample) olt 3 x pcs. aterial: hromium molybdenum steel ounting bolt ass dditional ass oth ends tapped style od end Thread male thread Nut With boss in head side With rubber bumper uilt-in One-touch fittings oot style (Including mounting bolt) od side flange style (Including mounting bolt) ear flange style (Including mounting bolt) ouble clevis style (Including pin, snap ring, bolt) ylinder stroke alculation: (xample) - ylinder mass: - g Option mass: oth ends tapped style g 3 g With rubber bumper 3 g ouble clevis style g 3 g (g) (g) ylinder model ounting bolt size 3 x x 3 x 3 x x x 3 x x 3 x 3 x x x x x 3 x 3 x x x x x x x x 3 x 3 x x x x x x x x ylinder model ounting bolt size x 3 x 3 x x x x x x x x x 1 x x 3 x x x x x x x x x x x 1 x x x x x x x x x x 1 x ylinder model ounting bolt size x x x x x x x x x x x 1 x x x x x x x x x x x 1 x x x x x x x x x x 1 x ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () --

8 ompact ylinder: Standard Type ouble cting, Series onstruction i o! q!3 t! ry q! w With rubber bumper With boss in head side!1 u asic style uilt-in One-touch fittings J omponent Parts No. escription 1 ylinder tube Piston 3 Piston rod ollar etaining ring ushing od end nut umper aterial Note luminum alloy Hard anodized luminum alloy hromated Stainless steel ø to ø arbon steel ø to ø, Hard chrome plated luminum alloy ø to ø, nodized luminum alloy casted ø to ø, hromated, painted arbon tool steel Phosphate coated earing alloy or ø or larger only arbon steel Nickel plated Urethane No. escription umper entering location ring One-touch fitting Piston seal od seal Gasket aterial Urethane luminum alloy N N N Note Hard anodized ø to ø ø to ø3 QS Q Q U eplacement Parts/ Seal Kit (Pneumatic) Kit no. ontents -PS -PS -PS -PS -PS Set of nos. above -PS!,!3,!. -PS 3 3-PS -PS -PS Seal kit includes!!3!. Order the seal kit, based on each bore size. Since the grease kit does not include a grease pack, order it separately. Grease pack part no.: G-S- ( g) eplacement Parts/ Seal Kit (ir-hydro) 3 Kit no. H-PS H-PS H-PS H-PS H-PS H3-PS H-PS H-PS ontents Set of nos. above!,!3,!. Seal kit includes!!3!. Order the seal kit, based on each bore size. Since the grease kit does not include a grease pack, order it separately. Grease pack part no.: G-S- ( g) ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () -- -

9 Series lean Series Q Stroke () opper and luorine-free Series (or T manufacturing process) Q Stroke ()() lean Series elief type Vacuum type ø, ø, ø, ø, ø, ø, ø, ø3, ø, ø opper and fluorine-free series ø, ø, ø, ø, ø, ø, ø, ø3, ø, ø The type which is applicable for using inside the clean room graded lass by making an actuator s rod section a double seal construction and discharging by relief port directly to the outside of clean room. To prevent the influence of copper ions or halogen ions during T manufacturing processes, copper and fluorine materials are not used in the component parts. Specifications ction Proof pressure aximum operating pressure ushion Piston speed ounting ouble acting, ø, ø, ø, ø, ø, ø, ø, ø3 ø, ø 1. Pa 1. Pa None Note) 3 to mm/s 3 to 3 mm/s Through-hole Note) ø with switch: With rubber bumper (Standard) or details, refer to the separate catalog, Pneumatic lean Series. Specifications ction Proof pressure aximum operating pressure ushion Piston speed ounting ouble acting, ø, ø, ø, ø, ø, ø, ø, ø3, ø, ø 1. Pa 1. Pa None, ubber bumper to mm/s Through-hole, oth ends tapped style onstruction Series - (ouble seal type) Series - (Single seal, Vacuum suction) Water esistant efer to pages to for details. Q ounting Stroke Option -X elief port ushing od seal Vacuum port (Vacuum suction) ushing od seal With auto switch (uilt-in magnet) Water resistant -color indication solid state switch Water resistant cylinder V N seals (Nitrile rubber) K seals (luororubber) ade to Order specifications Ideal for use under the atmosphere having coolant for machine tools, etc. ompatible for the environment, where waterdrops are splashed around the food processing machinery and the car washers, etc. relief port is provided in the area between the double rod seals to discharge the exhaust air outside of the clean room. Thus, the amount of dust generated has been reduced to 1/ of that of an ordinary cylinder. Structurally identical to the - series, the outer rod seal has been removed to evacuate through the vacuum port. This draws out any external air from the clearance between the rod and the cover to practically eliminate the generation of external dust. This should be used in an application that requires an even higher level of cleanliness than the - series. Specifications ction ouble acting, ø, ø, ø, ø, ø, ø3, ø, ø ushion None ade to order Snap ring/piston rod/od end nut material: Stainless steel (-X) Specifications other than above are the same as standard, basic style. ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () --

10 ompact ylinder: Standard Type ouble cting, Series Smooth cylinder ow-speed cylinder Y ounting bracket Stroke ()() X ounting bracket Stroke ()() Smooth cylinder ow-speed cylinder Smooth operation with minimal sticking and slipping at low speeds. ual-side low friction operation is possible. Smooth operation with minimal sticking and slipping at low speeds. Starts smoothly with minimal ejection even after being rendered for hours. Specifications Specifications 3 3 odel Pneumatic (Non-lube) type odel Pneumatic (Non-lube) type luid ir luid ir Proof pressure 1. Pa Proof pressure 1. Pa aximum operating pressure. Pa aximum operating pressure 1. Pa mbient and fluid temperature mbient and fluid temperature J ushion od end thread ubber bumper (Standard) emale thread ubber bumper od end thread None emale thread Stroke length tolerance ounting +1. Through-hole Stroke length tolerance ounting +1. Through-hole QS Piston speed llowable leakage to mm/s.l/min (N) or less Piston speed. to 3 mm/s Note 1) In the case of without auto switch, x. is used for stroke only. Q inimum Operating Pressure 3 inimum operating pressure (Pa). efer to est Pneumatics No. 3 for details..1 inimum Operating Pressure 3 inimum operating pressure (Pa). efer to est Pneumatics No. 3 for details..1 Q U - ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () --

11 ompact ylinder: Standard Type ouble cting, Series Q With uto Switch efer to page below for further information on auto switches. uto switch specifications Proper auto switch mounting position and height inimum stroke for auto switch mounting Operating range Switch mounting bracket: Part no. P. 3 to 1 P. to ass (g) dditional ass (g) ylinder stroke oth ends tapped style 1 od end male thread ale thread Nut 1. 1 With boss in head side With rubber bumper uilt-in One-touch fittings oot style (Including mounting bolt) od side flange style (Including mounting bolt) ear flange style (Including mounting bolt) ouble clevis style (Including pin, retaining ring, bolt) alculation: (xample) Q- ylinder mass: Q- Option mass: oth ends tapped style With rubber bumper ouble clevis style g g 3 g 3 g g g dd each mass of auto switches and mounting brackets. uto Switch ounting racket ass ounting bracket part no. pplicable bore ass (g) Q-1 ø to ø 1. Q- ø to ø 1. Q- ø to ø or the auto switch mass, refer to page 3 to 1. ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () --

12 ompact ylinder: Standard Type ouble cting, Series onstruction eplacement Parts/Seal Kit Pneumatic 3 e o t r! y q u i w Kit no. -PS -PS -PS -PS -PS -PS -PS 3-PS -PS -PS ontents Set of nos. above i, o,!. Seal kits includes i o!. Order the seal kit, based on each bore size. Since the grease kit does not include a grease pack, order it separately. Grease pack part no.: G-S- ( g) ounting olt for Q/With uto Switch ounting method: ounting bolt for through-hole mounting style of Q is available as an option. Ordering: dd the word olt in front of the bolts to be used. xample) olt 3 x 3 pcs. ylinder model Q Q Q Q ounting bolt size 3 x 3 x x x x x 3 x x x x x x x x x x x x x x x x x x x x x x x x x x ylinder model Q Q Q omponent Parts No. 1 3 escription ylinder tube Piston Piston rod ollar etaining ring ushing agnet Piston seal od seal Gasket aterial luminum alloy luminum alloy Stainless steel arbon steel luminum alloy luminum alloy casted arbon tool steel earing alloy N N N eplacement Parts/Seal Kit ir-hydro 3 Kit no. H-PS H-PS H-PS H-PS H-PS H3-PS H-PS H-PS Note Hard anodized hromated ø to ø ø to ø, Hard chrome plated ø to ø, nodized ø to ø, hromated, painted Phosphate coated or ø or larger only ontents Set of nos. above i, o,!. Seal kits includes i o!. Order the seal kit, based on each bore size. Since the grease kit does not include a grease pack, order it separately. Grease pack part no.: G-S- ( g) aterial: hromium molybdenum steel ounting bolt size x x x x x x x x x x x 1 x x x x x x x x x x x x x 1 x x x x x x x x x x 1 x ylinder model Q Q Q ounting bolt ounting bolt size x x x x x x x x x x x 1 x x x x x x x x x x x 1 x x x x x x x x 1 x x 1 x ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () -- J QS Q Q U -

13 Series imensions ø to ø/ Without uto Switch asic style (Through-hole): oth ends tapped style: O1 thread oth nds Tapped Style O1 x. x. x 1. x 1. H thread effective depth x øn through x øo counterbore Q øi x x. (Port size) Z ø K + Stroke With boss in head side G øth With oss in Head Side G Th Note) With boss in rod side : Option (Suffix -X3 to the end of part number.) od nd ale Thread H x. x 1. x 1. x 1. X. 1. Width across flats 1 H1 1 X asic Style to 3 to 3 to to Note) xternal dimensions with rubber bumper are same as standard type as shown above. or details about the rod end nut and accessory brackets, refer to page H 3 x. x. x. x 1. I 3 K N O. depth 3.. depth 3. depth depth Q. Z or calculation on the longitudinal dimension of the intermediate strokes, refer to page 3. ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () --

14 ompact ylinder: Standard Type ouble cting, Single od Series oot style: X Z H Y x ø X Y T + Stroke Special cap bolt Y X G S + Stroke oot Style to 3 to 3 to to G H S T X Y Z X oot bracket material: arbon steel Y od side flange style: X Z V x ø T + Stroke od Side lange Style to 3 to 3 to to T V X Z lange bracket material: arbon steel J Head side flange style: G + Stroke T X Z V x ø Head Side lange Style to 3 to 3 to to lange bracket material: arbon steel imensions except, and are the same as rod side flange ( ) style. QS Q Q U ouble clevis style: T + Stroke W + Stroke x N ap bolt ø hole H xis d X Z ø ouble levis Style to 3 to 3 to to T W X Z N x. x. x 1. x 1. ouble clevis bracket material: arbon steel or details about the rod end nut and accessory brackets, refer to page. ouble clevis pins and retaining rings are included. ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () -- -

15 Series imensions ø to ø/ With uto Switch asic style (Through-hole): Q oth ends tapped style: Q O1 thread oth nds Tapped Style O1 x. x. x 1. x 1. H thread effective depth. uto switch inimum lead wire bending radius S ø U V K x øn through x øo counterbore Q + Stroke x x. (Port size) With boss in head side øth With oss in Head Side G Th Note) With boss in rod side : Option (Suffix -X3 to the end of part number.) G od nd ale Thread H x. x 1. x 1. x 1. X. 1. Width across flats 1 H1 1 X or the auto switch mounting position and its mounting height, refer to page to. asic Style to 3 to 3 to to H 3 x. x. x. x 1. K N O. depth 3.. depth 3. depth depth Q. S 3... U V 3 Note ) xternal dimensions with rubber bumper are same as standard type as shown above. or details about the rod end nut and accessory brackets, refer to page. Note 3) or calculation on the longitudinal dimension of the intermediate strokes, refer to page 3. ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () --

16 ompact ylinder: Standard Type ouble cting, Single od Series oot style: Q X Z H Y x ø + Stroke X Y T Y X Special cap bolt G S + Stroke oot Style to 3 to 3 to to G H S T X Y Z X oot bracket material: arbon steel Y od side flange style: Q V x ø X Z T + Stroke od Side lange Style to 3 to 3 to to T V X Z oot bracket material: arbon steel J Head side flange style: QG + Stroke T Z X V x ø Head Side lange Style to 3 to 3 to to oot bracket material: arbon steel imensions except, and are the same as rod side flange ( ) style. QS Q Q U ouble clevis style: Q T + Stroke W + Stroke x N ap bolt ø hole H xis d Z X ø ouble levis Style to 3 to 3 to to T W X Z N x. x. x 1. x 1. ouble clevis bracket material: arbon steel or details about the rod end nut and accessory brackets, refer to page. ouble clevis pins and retaining rings are included. ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: ()

17 Series imensions ø to ø asic style (Through-hole): /Q H thread effective depth øi oth ends tapped style: /Q O1 thread inimum lead wire bending radius x øn through x øo counterbore Q x P (c,npt,g) (Port size) uto switch oth nds Tapped Style O1 x 1. x 1. x 1. Z ø K W J With boss in head side + Stroke øth With oss in Head Side 3 Th... Note 1) With boss in rod side : Option (Suffix -X3 to the end of part number.) Width across flats 1 H1 1 X od nd ale Thread 1 1 H x 1. x 1. 1 x 1. X uilt-in One-touch fittings: ø to ø W1 V øz1 x P1 (Piping tube O..) uilt-in One-touch ittings Z1 P1 V W1 3.. asic Style or the auto switch mounting position and its mounting height, refer to page to. Without auto switch With auto switch P Q P Q. x.. to 3 3., 1/. 33. c1/. 33 to 3..,. 3. 1/. 3. c1/ to 3. 3.,... 1/.... c1/. 1 N. O depth S. U 31. W. Z H x 1. x 1. x 1. I J. K 1 Note ) xternal dimensions with rubber bumper are same as standard type as shown above. or details about the rod end nut and accessory brackets, refer to page. Note 3) or calculation on the longitudinal dimension of the intermediate strokes, refer to page 3. ecause we have the spacer-installed type and the exclusive body type (-X). 3.. depth depth ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () --

18 ompact ylinder: Standard Type ouble cting, Single od Series oot style: /Q X Z H Y + Stroke x ø X Y Y X G S + Stroke T Special cap bolt oot Style Z 1 to, to, to, X.... Y Without auto switch With auto switch S S G H T X Y oot bracket material: arbon steel od side flange style: /Q X Z V x ø T + Stroke od Side lange Style to, to, to, Without auto switch With auto switch T V X Z oot bracket material: arbon steel J Head side flange style: G/QG + Stroke T V X Z x ø Head Side lange Style to, to, to, Without auto switch With auto switch oot bracket material: arbon steel imensions except, and are the same as ( ) rod side flange style. QS Q Q U ouble clevis style: /Q T + Stroke W + Stroke x N ap bolt ø hole H xis d Z.1.3 X ouble levis Style to, to, to, N x 1. x 1. x 1. Without auto switch With auto switch T W X Z ouble clevis bracket material: ast iron Surface treatment: Painted or details about the rod end nut and accessory brackets, refer to page. ouble clevis pins and retaining rings are included. ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: ()

19 Series imensions ø3 to ø asic style (Through-hole) H thread effective depth øi oth ends tapped style: /Q O1 thread inimum lead wire bending radius x øn through x øo counterbore x P (c,npt,g) Q (Port size) uto switch oth nds Tapped Style 3 O1 x 1. x 1. x 1. 1 Z ø K W J With boss in head side + Stroke øth With oss in Head Side Th Note 1) With boss in rod side : Option (Suffix -X3 to the end of part number.) uilt-in One-touch fittings: ø3 to ø V Width across flats 1 øz1 H1 1 X x P1 (Piping tube O..) od nd ale Thread H uilt-in One-touch ittings Z1 P1 V. W1 1 x 1. x 1. x 1. X W1 asic Style or the auto switch mounting position and its mounting height, refer to page to. 3 to, to, to, Without auto switch With auto switch H. x 1.. x. x. I J. K 1 N O depth. 1. depth. 1. depth. P 1/ 3/ 3/ Q 1 3 S U... W 3. Z 1 Note ) xternal dimensions with rubber bumper are same as standard type as shown above. or details about the rod end nut and accessory brackets, refer to page. Note 3) or calculation on the longitudinal dimension of the intermediate strokes, refer to page 3. ecause we have the spacer-installed type and the exclusive body type (-X). ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () --

20 ompact ylinder: Standard Type ouble cting, Single od Series oot style: /Q + Stroke Head side flange style: G/QG H Y Special cap bolt V X Z x ø X Y T YX G S + Stroke + Stroke T X Z x ø od side flange style: /Q ouble clevis style: /Q T x N ap bolt ø hole H xis d V X Z oot Style 3 3 x ø od Side lange Style 3 to, to, to, to, to, to, X Y Z X Y T + Stroke Without auto switch With auto switch S S G H T to, to 3 1, 3, to oot bracket material: arbon steel Without auto switch With auto switch T V X Z oot bracket material: arbon steel + Stroke W + Stroke Head Side lange Style 3 to, to, to, Z 33. N x x x 1. Z.1.3 X ( ) imensions except Without auto switch With auto switch, and are the same as rod side to , flange style. 3 to.,. to, oot bracket material: arbon steel ouble levis Style Without auto switch With auto switch T W X 3 to 3, to , to 1 3 1, ouble clevis bracket material: ast iron Surface treatment: Painted or details about the rod end nut and accessory brackets, refer to page. ouble clevis pins and retaining rings are included. 1 ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () -- J QS Q Q U -

21 Series ccessory racket or I-G, I-Z1 I-G, I-G3 Single Knuckle Joint or I-G, I-G I-G, I-G or Y-G, Y-Z1 Y-G, Y-G3 ouble Knuckle Joint or Y-G, Y-G Y-G, Y-G ø ø øn hole H xis d øn hole H xis d aterial: arbon steel Part no. I-G I-Z1 I-G I-G3 I-G I-G I-G I-G pplicable bore size,, ø ø ø3 ø 3 3 aterial: ast iron x. x 1 x 1. x 1. x 1. 1 x 1. x 1. x U1. 31 NH NX aterial: arbon steel Part no. Y-G Y-Z1 Y-G Y-G3 Y-G Y-G Y-G Y-G pplicable bore size,, ø ø ø3 ø 3 3 x. x 1 x 1. x 1. x 1. 1 x 1. x 1. x 1. aterial: ast iron Knuckle pin and retaining ring are included. U1. 31 N H NX NZ pplicable pin part no. IY-G IY-J1 IY-G IY-G3 IY-G IY-G IY-G IY-G Knuckle Pin (ommon with double clevis pin) od nd Nut ø ø l aterial: arbon steel aterial: arbon steel pplicable Part no. bore size d d IY-G IY-J1 IY-G IY-G3 IY-G IY-G IY-G IY-G,, Type retaining rings for axis are included. l m t pplicable snap ring Type for axis Type for axis Type for axis Type for axis Type for axis Type for axis Type 1 for axis Type for axis Part no. NTJ-1 NT-1 NT- NT-3 NT- NT- NT- NT- pplicable bore size,,3 d x. x 1 x 1. x 1. x 1. 1 x 1. x 1. x 1. H ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () --

22 ompact ylinder: Standard Type ouble cting, Single od Series Simple Joint: ø to ø Type ounting racket U T1 x ø T V W Joint Joint and ounting racket (Type, Type ) Part No. Y 3 ounting bracket Y Y YU Type mounting bracket Type mounting bracket Joint llowable ccentricity pplicable air cylinder bore 3 or ø, ø or ø, ø3 ø ø ø ø ø ø3 ø ø ccentricity tolerance ± 1 ± 1. ± acklash. <Ordering> Joints are not included with the or type mounting brackets. Order them separately. (xample) ø Part no. Type mounting bracket part no. Y-3 Joint YU-3 Joint and ounting racket (Type, Type ) Part No. pplicable mounting bracket Joint part no. Type mounting bracket Type mounting bracket,, 3 YU-3 YU- YU- YU- Y-3 Y- Y- Y- Y-3 Y- Y- Y- ød1 K (Width across flats ø) H (With locking) ød Part no. Y-3 Y- Y- Y- Part no. Y-3 Y- Y- Y-,, 3,, 3 aterial: hromium molybdenum steel (Nickel plated) 1 31 U. V W 3 Type ounting racket V Part no. Y-3 Y- Y- T T1,, 3 Joint 3 ass (g) J 1 3 x ø through x øo counterbore 3 J T1.... S T 1 aterial: Stainless steel øo W. depth.. depth. 1 depth J QS Q Q U Part no. YU-3 YU- YU- YU- UT pplicable bore size,, 3 U aterial: hromium molybdenum steel (Nickel plated) U d1 d H K UT ass (g) x 1. x 1. x x. Y- Part no. Y-3 Y- Y- Y-,, 3 1 T1.... T 1 1 V 1 3 W depth ourtesy of Steven ngineering, Inc.-3 yan Way, South San rancisco, -3-ain Office: () --Outside ocal rea: () -- S 1 ass (g) 1 3 -