OneRemote ipod Dock for Bang & Olufsen Type Operates any ipod, including Touch and iphone

Transcription

1 OneRemote ipod Dock for Bang & Olufsen Type Operates any ipod, including Touch and iphone Beo4 and Beo5 are remote control terminals from Bang & Olufsen. OneRemote supplies interface modules that allow third party equipment to be operated via a Bang & Olufsen remote control system. Made in Denmark by

2 Operating with Beo4 or Beo5 Operating with Beolink1000 OO S A Select Select Menu pp X Z Select Select Menu Q WPrevious Next q Play/ pause Note! When your ipod is inserted into the dock, it is operable after exchanging data with the dock within secs. pa ps q Previous Next Play/ pause This OneRemote ipod Dock that is based on development of a Logic 3 Pro Dock can only be operated using a Bang & Olufsen remote control. When delivered the OneRemote ipod Dock can be operated directly when selecting A.AUX on a Beo4/Beo5 or SHIFT RADIO on a Beolink Refer to the installation pages below to change this default setting. 2

3 Congratulations With your ipod or iphone inserted in the OneRemote ipod Dock it can be operated and charged at the same time. When the dock is connected to a Bang & Olufsen audio- or videosystem you may operate both the dock s ipod and the audio-videosystem with the same remote control, Beolink 1000, Beo4 or Beo5. If your Bang & Olufsen system comprises one or more linkrooms in a BeoLink System sound may be distributed to these rooms, and in some cases see below you might even be able to operate the docked device from there. Connect the OneRemote ipod Dock to a Bang & Olufsen audio- or videosystem as any available audio- or AV input source. Setting up Bang & Olufsen systems may vary, and this manual describes how. Setup mode 1. The B&O remote control directly operates the docked ipod in parallel with the audiomaster. This mode of operation will work in any setup with any B&O audiomaster of any generation, provided a vacant input for the dock is available in the audiomaster. Setup mode 2. The B&O remote control operates a B&O audiomaster. The audiomaster communicates with the docking station via the connecting 7-pin Datalink cable. The docked device may even be operated from any linkroom in the linksystem. Setup mode 3. The OneRemote ipod Dock is connected to a main room TV as an AV (scart) source. The dock is operated via linkdata received from the TV s AV socket. This way the dock may be accessed from any link room too. If the ipod contains pictures, they may be displayed on the TV. Setup mode 4. The OneRemote ipod Dock may be connected as an AV source to every stand alone or link room B&O TV. With a dock in every room, different music may be enjoyed in each room - and every docked ipod is always fully charged. 3

4 How it works This OneRemote Audio solution is easily operated, once the installation has been completed. See the following pages regarding installation. The OneRemote ipod Dock is delivered with a 1.5 meter DIN cable for connection to a Bang & Olufsen audiomaster. As default the OneRemote ipod Dock is directly operable selecting the A.AUX or SHIFT RADIO source on a Bang & Olufsen remote control. Thus connection to any Bang & Olufsen audiomaster is plug & play. Basic Setup The OneRemote ipod Dock can be operated in one of two ways, which is selected during the initial installation: 1. The Direct Mode The Bang & Olufsen remote control communicates with the ipod via the dock s own built-in IR-receiver. This mode is used for audiomasters without Datalink communication. See table on page 7. Refer to page 5 for how to setup the Direct Mode. 2. The Datalink Mode The Bang & Olufsen remote control communicates with the ipod via the audioor videomaster connected to the dock with the dock s 7-pin Datalink cable plus for videomasters an extra adaptor. Refer to page 6 for how to setup the Datalink Mode. 4

5 Setting up the OneRemote ipod Dock for the Direct Mode - using a Bang & Olufsen Remote Control In the Direct Mode the Bang & Olufsen remote control signal operates both the OneRemote ipod Dock and the Bang & Olufsen audiomaster at the same time. Thus the dock must be programmed to respond to the correct signals. In the Direct Mode the docked ipod may be listened to from any linkroom, but can not be operated from there. The Direct Mode will work in any setup, but the dock s IR-receiver is NOT plasma-safe. If there is a plasma panel in the room, an external plasma-safe IR-receiver has to be used. To enable direct operation of the OneRemote ipod Dock with a Bang & Olufsen remote control, the dock has to be programmed as follows: 1. Set the internal IR-receiver for direct response, Direct Mode 2. Set the Bang & Olufsen source that the dock shall respond to directly This programming is required only once during the first installation, but may be changed any time. The dock s internal IR-receiver is used for programming and no other equipment is needed. Setting up the Direct Mode: Power up the OneRemote ipod Dock While the logo lights red, press qq001 Setting up the Source: If the OneRemote ipod Dock is connected to a Bang & Olufsen audiomaster a an A.AUX source it should only start up when A.AUX is called for via the remote control. A.AUX is the factory default setting. (A.AUX = Shift-Radio on Beolink 1000) If the OneRemote ipod Dock is connected to a Bang & Olufsen TV as a DVD source it should only start up when DVD is called for via the remote control. And so on. Example: Setting the source to Phono: Power up the OneRemote ipod Dock While the logo lights red, press qqy0r. For other sources, simply enter the alternative source button instead of Y. 5

6 Setting up the OneRemote ipod Dock for the Datalink Mode - using a Bang & Olufsen Remote Control The Bang & Olufsen remote control communicates with the ipod via the audio- or videomaster connected to the dock with the dock s 7-pin Datalink cable plus for some videomasters an extra adaptor. As data for different sources are not alike the dock must be programmed in accordance with the selected source and the corresponding socket. Refer to the table on page 7 to se which sources are available on different Bang & Olufsen audiomasters. Setting actual Datalink Source: Power up the OneRemote ipod Dock While the logo lights red, press: CD/ PH source/socket: qq002 ATAPE/ ATAPE2/ AMEM/ AMEM2/ TP1/ TP2 source/socket: qq003 6

7 B&O Source Selections This table show available sockets on Bang & Olufsen audiomasters, the source button on the remote control and what is shown in its display, when the source is selected. The list also shows whether a socket offers Datalink control or not. If Datalink is available the device can be operated from any linkroom. Phono N.RADIO A.Tape A.MEM Shift A.tape AMEM2 A.Tape2 N.Music CD A.AUX Shift Radio Remarks BeoCenter A.AUX RCA in/ out Beosound A.AUX RCA in/ out BeoSound 1* NR AU NR - AU DIN in BeoSound Century* AU TAPE** AU - AU DIN in BeoSound 9000 N.Radio ATAPE N.Music - A.AUX DIN in/ out BeoSound 30/3200 Phono TAPE TAPE - AUX DIN in/out BeoSound Ouverture Phono TAPE** TAPE2 - AUX Datalink BeoSystem 2500 Phono TAPE** TAPE2 - AUX Datalink BeoCenter 2300 Phono TAPE TAPE2 - AUX Datalink Beomasters Phono*** TAPE TAPE2 CD AUX Datalink 35/45/55/65/7000 BeoMaster 3300 PH TP NR - NR Datalink BeoCenters 80/85/90/93/9500 Phono*** TAPE** TAPE2 CD AUX Datalink NR No response * BeoSound 1 and BeoSound Century are stand alone units, not defined as audiomasters. ** TAPE built in. *** PHONO : BM 33/5500 and BC 80/85/90/9500 all have RIAA built in. 7

8 Setting up the OneRemote ipod Dock The attached Datalink cable includes audio and control data connections allowing for operation of the ipod via a Bang & Olufsen audio- or videomaster. Insert the appropriate cradle (supplied with your iphone/ ipod) into the dock. NOTE for iphone 3G the cradle is supplied with the dock Setting up video output iphone/ iphone3g, ipod Touch, Touch 2G, ipod Classic, ipod Nano 3G/ 4G and ipod 5G have video output and are able to show pictures on a screen. Appropriate and not included cables have to be used to get this. This OneRemote ipod Dock has both RGB and Composite Video outputs. Availble video output: RGB and CVBS/ Composite Video Connecting as a Scart A/V source Connect the dock as a scart source to any B&O TV, using a OneRemote scart adaptorcable type The dock then must be set up in Datalink mode (page 6) and the source must be programmed, i.e. VMEM or VAUX (page 5). 8

9 Specifications Video out resolution: Provided power adaptor: Sockets: USB mini Attached Datalink cable Audio output C/V Y/G, Pb/B, Pr/R 480 x 480 to 640 x 480 depending on ipod model. 650mA For sync function of the iphone/ ipod. 2 Meter black, data & audio for Bang & Olusen. For use with other equipment than Bang & Olufsen. TV Composite video out. RGB Component video output. Video output compatible devices: iphone/ iphone 3G: 640x480 pixels iphone Touch/ Touch 2G: 640x480 pixels ipod Classic 640x480 pixels ipod Nano 3G/ 4G 640x840 pixels ipod 5G 480x480 pixels 9

10 10

11 11

12 2601u3uk 12