IBM System Storage N3400 offers enterprise-class Fibre Channel, iscsi, SAS, and NAS storage

Transcription

1 110004, dated February 9, 2010 IBM System Storage N3400 offers enterpriseclass Fibre Channel, iscsi, SAS, and NAS storage Table of contents 1 Overview 33 Publications 2 Key prerequisites 34 Technical information 2 Planned availability date 37 Terms and conditions 2 Description 40 Prices 4 Product number 61 Order now At a glance The IBM System Storage TM N3400 Model A11 and Model A21 are designed to provide: High data availability and systemlevel redundancy Support of concurrent block I/O and file serving over Ethernet and FC SAN infrastructures High throughput and fast response times Fibre Channel (FC), Serial Advanced Technology Attachment (SATA), and Serial Attached SCSI (SAS) disk expansion units Support for both block I/O via Fibre Channel (FC) and Internet Small Computer System Interface (iscsi), and file I/O via CIFS, NFS, HTTP, and FTP protocols Maximum of 136 disk drives supported, for both Model A11 and Model A21 8 GB (per node) of random access memory One backend FC loop for both models One SAS stack for both models Enhanced reliability with active/active failover support on the Model 21 Upgrade capability from Model A11 to Model A21 For ordering, contact your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at 800IBMCALL (Reference: YE001). Overview The IBM System Storage N3400 consists of storage controller Model A11, a singlenode base unit, and the Model A21, an active/active dualnode base unit. Both models are designed to provide fast data access, simultaneous multiprotocol support, expandability, upgradability, and low maintenance requirements. The two models of the N3400 are designed to provide: IBM is a registered trademark of International Business Machines Corporation 1

2 High data availability and systemlevel redundancy to help address the needs of businesscritical and missioncritical applications Single, integrated architecture to support concurrent block I/O and file serving over Ethernet and Fibre Channel SAN infrastructures High throughput and fast response times for database, , and technical applications 6 to 12 Serial Attached SCSI (SAS) or Serial Advanced Technology Attachment (SATA) disk drives (via optional features) Support for both block I/O via Fibre Channel (FC) and Internet Small Computer System Interface (iscsi), and file I/O via CIFS, NFS, HTTP, and FTP protocols Support for maximums of 132 disk drives or 132 TB of physical storage capacity 8 GB of random access memory (per node) One backend FC loop for both models One SAS stack for both models Upgrade capability from Model A11 to Model A21 The N3400 storage controller supports the EXN1000 SATA storage expansion unit, the EXN2000 and EXN4000 FC storage expansion units, and the EXN3000 SAS/SATA storage expansion unit. These N series models are designed to provide fast data access, simultaneous multiprotocol support, expandability, upgradability, and low maintenance requirements. Additional functions, such as snapshot, mirroring, and business continuance capability, are available through optional licensed functions. Feature exchange None Key prerequisites The IBM System Storage N3400 requires FC, NFS, CIFS, or iscsi protocol function. Planned availability date March 5, 2010 Description The IBM System Storage N3400 storage controllers are designed to interoperate with products capable of data transmission in the industrystandard iscsi, CIFS, FCP, and NFS protocols. These include the IBM System p, IBM System i (NFS only), IBM System x, and IBM System z (NFS only) servers. The N3400 storage controllers consist of the Model A11 and Model A21 and associated software. The Model A11 is designed to provide a singlenode storage controller with iscsi support, and NFS, CIFS, and FCP support via optional features. The N3400 Model A11 is a 2U storage controller that must be mounted in a standard 19inch rack. The base chassis includes: 2U, standard 19inch rackmount enclosure Two 1.66 GHz Intel dualcore Xeon LV processors 8 GB random access ECC memory 4 integrated gigabit Ethernet RJ45 ports Two integrated 4Gbps small form factor (SFF) Fibre Channel ports One SAS port Quad Small Form Factor Pluggable (QSFP) IBM is a registered trademark of International Business Machines Corporation 2

3 One serial console port Two integrated Remote LAN Management (RLM) port Redundant hotswappable, autoranging power supplies and cooling fans The Model A11 may be upgraded to a Model A21. The upgrade from a Model A11 to a Model A21 is a disruptive upgrade. The Model A21 is designed to provide identical function as the N3400 Model A11, but with the addition of a second processor control module (PCM) and the Clustered Failover (CFO) licensed function. The Model A21 also supports a maximum of 136 drives. The Model A21 consists of two PCMs that are designed to provide failover and failback function, helping improve overall availability. The Model A21 is a 2U rackmountable storage controller. The Model A21 includes: 2U, standard 19inch rackmount enclosure GHz Intel dualcore Xeon LV processors 16 GB random access ECC memory 8 integrated gigabit Ethernet RJ45 ports 4 integrated 4Gbps small form factor (SFF) Fibre Channel ports Two SAS ports QSFP Two serial console ports 4 integrated Remote LAN Management (RLM) port Redundant hotswappable, autoranging power supplies and cooling fans The N3400 storage controller Models A11 and A21 can attach a maximum of 8 FC storage expansion units, either EXN1000, EXN2000, or EXN4000. The maximum number of EXN3000 SAS/SATA storage expansion units that can be attached is four. On the initial order of an N3400, either SASattached or FCattached expansion units may be ordered, not both. Also, for an initial order, no more than six FCattached expansion units may be ordered. The EXN1000 storage expansion unit provides a 3U rackmountable disk enclosure containing 5, up to a maximum of 14, serial advanced technology attachment (SATA) disk drives, either in 250 GB, 500 GB, 750 GB, or 1 TB physical capacities. The EXN2000 and EXN4000 storage expansion units provide a 3U rackmountable disk enclosure containing 5, up to a maximum of 14, FC disk drives. The EXN2000 and EXN4000 support the following FC disk drive speeds and capacities: 15,000 revolutions per minute (15K RPM) of 144 GB, 300 GB, 450 GB, and 600 GB physical capacities 10,000 revolutions per minute (10K RPM) of 144 GB and 300 GB physical capacities The EXN3000 storage expansion unit is a 4U rackmountable disk enclosure containing 5, and up to a maximum of 24, SAS or SATA disk drives. The supported disk drives are: SAS: 144 GB, 300 GB, 450 GB, and 600 GB physical capacities SATA: 500 GB, 750 GB, and 1 TB physical capacities Each EXNx000 storage expansion unit contains a maximum of 14 (24 for SAS) disk drives, all of a particular type (rotational speed and capacity). For the initial order of the IBM System Storage N3400, you may not include EXNx000 storage expansion units containing more than two types (rotational speed and capacity) of disk drives. The maximum raw storage capacity of the N3400 system is determined by the maximum number of disk drives supported (136) and a maximum physical storage limit of 136 TB. Both limits must be honored IBM is a registered trademark of International Business Machines Corporation 3

4 The following table describes the maximum supported total physical storage capacity for the N3400 Model A11 and Model A21: Maximum Maximum Maximum Disk Disk drive storage disk physical enclosure capacity enclosures drives capacity 300 GB SAS disk drives TB 450 GB SAS disk drives TB 600 GB SAS disk drives TB 500 GB SATA disk drives TB 1 TB SATA disk drives TB EXN GB SATA disk drives TB EXN GB SATA disk drives TB EXN GB SATA disk drives TB EXN TB SATA disk drives TB EXN GB FC disk drives TB EXN GB FC disk drives TB EXN GB SAS disk drives TB EXN GB SAS disk drives TB EXN GB SAS disk drives TB EXN GB SAS disk drives TB EXN GB SATA disk drives TB EXN TB SATA disk drives TB EXN GB FC disk drives TB EXN GB FC disk drives TB EXN GB FC disk drives TB EXN1000 SATA storage expansion units must not share a Fibre Channel loop with EXN2000 and EXN4000 FC storage expansion units. Section 508 of the U.S. Rehabilitation Act Accessibility information for the IBM System Storage N3400 may be found in a US Section 508 Voluntary Product Accessibility Template (VPAT) that can be requested via IBM's Web site at Reference information Refer to Hardware Announcement , dated February 09, 2010, IBM System Storage N series function authorization for IBM System Storage N3400. Product number Description Machine Model Feature N3400 Model A A11 N3400 Model A A GB, 15K RPM SAS HDD 2859 A11, A GB, 15K RPM SAS HDD 2859 A11, A GB, 15K RPM SAS HDD 2859 A11, A GB SATA Drive 2859 A11, A TB SATA Drive 2859 A11, A HDD Blank Panel 2859 A11, A Licensed Function Indicators Base Pack 2859 A Foundation Pack 2859 A Protection Pack 2859 A Advanced Pack 2859 A Data ONTAP 2859 A CIFS 2859 A IBM is a registered trademark of International Business Machines Corporation 4

5 HTTP 2859 A NFS 2859 A SyncMirror 2859 A FlexClone 2859 A MultiStore 2859 A NearStore 2859 A iscsi Protocol 2859 A SnapMirror/SnapVault Bundle 2859 A FlexCache for NFS 2859 A SnapMirror 2859 A SnapLock Compliance 2859 A SnapLock Enterprise 2859 A SnapRestore 2859 A SnapVault Primary 2859 A SnapVault Secondary 2859 A SnapManager SAP Filer 2859 A SnapManager Oracle Filer 2859 A SnapValidator 2859 A Fibre Channel Protocol 2859 A Disk Sanitization 2859 A SnapManager/Exchange Filer 2859 A SnapManager/SQL Filer 2859 A Deduplication 2859 A SnapManager VI Filer 2859 A SnapManager SharePointFiler 2859 A SnapManager Hyper V Filer 2859 A SnapDrive for UNIX Filer 2859 A SnapDrive for Win Filer 2859 A Base Pack 2859 A Foundation Pack 2859 A Protection Pack 2859 A Advanced Pack 2859 A Data ONTAP 2859 A CIFS 2859 A HTTP 2859 A NFS 2859 A CFO 2859 A SyncMirror 2859 A FlexClone 2859 A MultiStore 2859 A NearStore 2859 A iscsi Protocol 2859 A SnapMirror/SnapVault Bundle 2859 A FlexCache for NFS 2859 A SnapMirror 2859 A SnapLock Compliance 2859 A SnapLock Enterprise 2859 A SnapMover 2859 A SnapRestore 2859 A SnapVault Primary 2859 A SnapVault Secondary 2859 A SnapManager SAP Filer 2859 A SnapManager Oracle Filer 2859 A SnapValidator 2859 A Fibre Channel Protocol 2859 A Disk Sanitization 2859 A SnapManager/Exchange Filer 2859 A SnapManager/SQL Filer 2859 A Deduplication 2859 A SnapManager VI Filer 2859 A SnapManager SharePointFiler 2859 A SnapManager Hyper V Filer 2859 A SnapDrive for UNIX Filer 2859 A SnapDrive for Win Filer 2859 A Host software SnapDrive for UNIX AIX 2859 A11, A SnapDrive for UNIX Solaris 2859 A11, A SnapDrive for UNIX HPUX 2859 A11, A SnapDrive for UNIX Linux 2859 A11, A SnapDrive for Windows 2859 A11, A ONTAP DSM for Windows MPIO 2859 A11, A SnapManager/Oracle WIN 2859 A11, A IBM is a registered trademark of International Business Machines Corporation 5

6 SnapManager/Exchange Host 2859 A11, A SnapManager/VI Host 2859 A11, A SnapMgr HyperV Host 2859 A11, A SnapManager for SAP Win 2859 A11, A SnapManager for SQL Host 2859 A11, A SnapManager for Oracle 2859 A11, A SnapManager for SAP 2859 A11, A SnapManager SharePointHost 2859 A11, A SM SharePoint Mgmt. Bundle 2859 A11, A Single Mbox Recovery 100pk 2859 A11, A Single Mbox Recovery 500pk 2859 A11, A Single Mbox Recovery 1000pk 2859 A11, A Single Mbox Recovery 2500pk 2859 A11, A Single Mbox Recovery 5K pk 2859 A11, A Single Mbox Recovery 10K pk 2859 A11, A Single Mbox Recovery 50K pk 2859 A11, A SMBR CAARCSERVE Extract Wiz 2859 A11, A SMBR Tivoli Tape Extract Wiz 2859 A11, A SMBR Legato Tape Extract Wiz 2859 A11, A SMBR NetBackup Extract Wiz 2859 A11, A SMBR PST Tape Extract Wiz 2859 A11, A SMBR HP Extract Wiz 2859 A11, A SMBR Commvault Galaxy Ex Wiz 2859 A11, A SMBR UltraBac Extract Wizard 2859 A11, A SMBR Agent for Adv Search 2859 A11, A SMBR Content Analysis Wizard 2859 A11, A SMBR Administrative Server 2859 A11, A OSSV Windows for Filers 2859 A11, A OSSV Linux for Filers 2859 A11, A OSSV OFM for Filers 2859 A11, A OSSV UNIX for Filers 2859 A11, A OSSV VMWare for Filers 2859 A11, A DFM Server License 2859 A11, A Op Mgr Store Resource Mgmt 2859 A11, A Ops Mgr Core tier 1 license 2859 A11, A Ops Mgr Core tier 2 license 2859 A11, A Ops Mgr Core tier 3 license 2859 A11, A Ops Mgr Core tier 4 license 2859 A11, A Ops Mgr Core tier 5 license 2859 A11, A Ops Mgr Core tier 6 license 2859 A11, A Ops Mgr Core tier 7 license 2859 A11, A Protect Mgr tier 1 license 2859 A11, A Protect Mgr tier 2 license 2859 A11, A Protect Mgr tier 3 license 2859 A11, A Protect Mgr tier 4 license 2859 A11, A Protect Mgr tier 5 license 2859 A11, A Protect Mgr tier 6 license 2859 A11, A Protect Mgr tier 7 license 2859 A11, A Provisioning Mgr. tier A11, A Provisioning Mgr. tier A11, A Provisioning Mgr. tier A11, A Provisioning Mgr. tier A11, A Provisioning Mgr. tier A11, A Provisioning Mgr. tier A11, A Provisioning Mgr. tier A11, A Protection Mgr. DR tier A11, A Protection Mgr. DR tier A11, A Protection Mgr. DR tier A11, A Protection Mgr. DR tier A11, A Protection Mgr. DR tier A11, A Protection Mgr. DR tier A11, A Protection Mgr. DR tier A11, A Operations Manager for N A11, A Protection Manager for N A11, A Provisioning Mgr. for N A11, A Protection Mgr. DR for N A11, A Power Cords PDU Pwr Cord, 42U Rack 2859 A11, A Power Cord, Cont. Europe 2859 A11, A Power Cord, UK 2859 A11, A Power Cord, Japan 2859 A11, A Power Cord, North America 2859 A11, A IBM is a registered trademark of International Business Machines Corporation 6

7 Power Cord, Australia/N.Z A11, A Power Cord, Switzerland 2859 A11, A Power Cord, Argentina 2859 A11, A Power Cord, China 2859 A11, A Power Cord, Denmark 2859 A11, A Power Cord, India/S.Africa 2859 A11, A Power Cord, Israel 2859 A11, A Power Cord, Italy 2859 A11, A Power Cord, N.America 250V 2859 A11, A Power Cord, Brazil 2859 A11, A Power Cord, Taiwan 2859 A11, A Power Cord, Taiwan 250V 2859 A11, A Installation Plant install in 2101 rack 2859 A11, A Field install rack mount kit 2859 A11, A Uninstalled code authoriztn 2859 A11, A MES ordering MES Order Indicator 2859 A11, A IBM Global Finance transaction IGF Transaction Indicator 2859 A11, A Port/loop counts Num. of FC Target Ports 2859 A11, A Num. of FC Storage Loops 2859 A11, A Num. of SATA Storage Loops 2859 A11, A Dualpath FC Cabling 2859 A Model conversions From To Description Type Model Type Model 2859 A A21 N3400 Model A21 Feature conversions: Type From To Description Base Pack Foundation Pack Protection Pack Advanced Pack Data ONTAP CIFS HTTP NFS SyncMirror FlexClone MultiStore NearStore iscsi Protocol SnapMirror/SnapVault Bundle FlexCache for NFS SnapMirror SnapLock Compliance SnapLock Enterprise SnapRestore SnapVault Primary SnapVault Secondary SnapManager SAP Filer SnapManager Oracle Filer SnapValidator Fibre Channel Protocol Disk Sanitization SnapManager/Exchange Filer SnapManager/SQL Filer Deduplication IBM is a registered trademark of International Business Machines Corporation 7

8 SnapManager VI Filer SnapManger SharePointFiler SnapManager Hyper V Filer SnapDrive for UNIX Filer SnapDrive for Win Filer Feature descriptions Disk drives SAS and SATA disk drive features (#40xx) Feature Description GB, 15K RPM SAS HDD GB, 15K RPM SAS HDD GB, 15K RPM SAS HDD GB, SATA drive TB, SATA drive Each of these features provides one disk drive. The initial order for both the N3400 Model A11 and N3400 Model A21 must include a minimum of 6 SAS HDD, up to a maximum of 12. The disk drives installed within each model must be of the same type (interface, capacity, and speed). HDD Blank Panel (#4099) This feature provides one blank panel used to close the space left vacant (the absence of a disk drive in a disk bay). Blank panels must be ordered in a quantity sufficient to cover any unpopulated bay, that is, the number of disk drives and blank panels for either model must equal 12 on the initial order. Licensed function features Licensed functions are authorized at the 2859 system level. Only one feature is required per 2859 system, regardless of the physical capacity within the 2859 system or the number of attached expansion units. The following licensed functions are provided with the N3400 Models A11 and A21 at no additional charge: Model A11 Model A21 feature feature Description Data ONTAP N/A 7105 CFO (Model A21 only) The following additional licensed functions are available on the N3400 Models A11 and A21 as optional features: Model A11 Model A21 Feature Feature Description Base Pack Foundation Pack Protection Pack Advanced Pack CIFS HTTP NFS N/A 6105 CFO SyncMirror IBM System Storage N3400 with FlexClone IBM System Storage N3400 with MultiStore IBM is a registered trademark of International Business Machines Corporation 8

9 IBM System Storage N3400 with NearStore N/A 7126 IBM System Storage N3400 with SnapVault Primary/Secondary iscsi Protocol SnapMirror/SnapVault Bundle FlexCache for NFS IBM System Storage N3400 with SnapMirror IBM System Storage N3400 with SnapLock Compliance IBM System Storage N3400 with SnapLock Enterprise N/A 7134 IBM System Storage N3400 with SnapMover IBM System Storage N3400 with SnapRestore IBM System Storage N3400 with SnapVault Primary IBM System Storage N3400 with SnapVault Secondary SnapManager SAP Filer SnapManager Oracle Filer IBM System Storage N3400 with SnapValidator Fibre Channel Protocol Disk Sanitization SnapManager/Exchange Filer SnapManager/SQL Filer Deduplication SnapManager VI Filer SnapManager SharePointFiler SnapManager Hyper V Filer SnapDrive for UNIX Filer SnapDrive for Win Win SnapDrive for UNIX AIX SnapDrive for UNIX Solaris SnapDrive for UNIX HPUX SnapDrive for UNIX Linux SnapDrive for Windows ONTAP DSM for Windows MPIO SnapManager/Oracle WIN SnapManager/Exchange Host SnapManager/VI Host SnapManager for SAP Win SnapManager for SQL Host SnapManager for Oracle SnapManager for SAP SM SharePoint Mgmt. Bundle Single Mbox Recovery 100pk Single Mbox Recovery 500pk Single Mbox Recovery 1000pk Single Mbox Recovery 2500pk Single Mbox Recovery 5K pk Single Mbox Recovery 10K pk Single Mbox Recovery 50K pk SMBR CAARCSERVE Extract Wiz SMBR Tivoli Tape Extract Wiz SMBR Legato Tape Extract Wiz SMBR NetBackup Extract Wiz SMBR PST Tape Extract Wiz SMBR HP Extract Wiz SMBR Commvault Galaxy Ex Wiz SMBR UltraBac Extract Wizard SMBR Agent for Adv Search SMBR Content Analysis Wizard SMBR Administrative Server OSSV Windows for Filers OSSV Linux for Filers OSSV OFM for Filers OSSV UNIX for Filers OSSV VMWare for Filers DFM Server License Op Mgr Store Resource Mgmt IBM is a registered trademark of International Business Machines Corporation 9

10 Ops Mgr Core tier 1 license Ops Mgr Core tier 2 license Ops Mgr Core tier 3 license Ops Mgr Core tier 4 license Ops Mgr Core tier 5 license Ops Mgr Core tier 6 license Ops Mgr Core tier 7 license Protect Mgr tier 1 license Protect Mgr tier 2 license Protect Mgr tier 3 license Protect Mgr tier 4 license Protect Mgr tier 5 license Protect Mgr tier 6 license Protect Mgr tier 7 license Provisioning Mgr. tier Provisioning Mgr. tier Provisioning Mgr. tier Provisioning Mgr. tier Provisioning Mgr. tier Provisioning Mgr. tier Provisioning Mgr. tier Protection Mgr. DR tier Protection Mgr. DR tier Protection Mgr. DR tier Protection Mgr. DR tier Protection Mgr. DR tier Protection Mgr. DR tier Protection Mgr. DR tier Operations Manager for N Protection Manager for N Provisioning Mgr. for N Protection Mgr. DR for N3400 Licensed function indicators Note: For all licensed function indicators, the corequisite 2870 feature must be purchased to establish authorization for use of the coresponding licensed function before the feature activation code is provided by IBM. Software Packs The software packs on the N3000 systems are designed to provide simplified ordering of common combinations of software features on the N series systems. These packs provide a discount for the included functions compared to purchasing each software feature separately. Base Pack (#5201 and #5251) This software pack provides the basic software functions for N series systems. It includes iscsi, FCP, HTTP, SyncMirror, NearStore, Deduplication, and one license for Operations Manager. Foundation Pack (#5202 and #5252) This software pack provides the foundation for expanded use of the N series system. It includes SnapRestore, SnapVault Primary, and one node of Provisioning Manager. Protection Pack (#5203 and #5253) This software pack provides the expanded protection software capabilities of the N series system. It includes SnapMirror, SnapVault Secondary, and one node of Protection Manager. Advanced Pack (#5204 and #5254) This software pack provides the basis for the advanced functions of the N series system. It includes FlexClone, MultiStore, SnapLock Compliance, and SnapLock Enterprise IBM is a registered trademark of International Business Machines Corporation 10

11 Data ONTAP (#6700 and #6750) This feature enables the Data ONTAP licensed function. Data ONTAP is an optimized, scalable, and flexible operating system for the IBM N series storage controllers that is designed for heterogeneous environments. Data ONTAP is designed to deliver flexible management and high availability, support business continuance, and support data retention, thereby helping reduce storage management complexity in your enterprise. Data ONTAP includes FlexShare, FlexCache, FlexVol, and Snapshot support. CIFS (#6002 and #6102) This feature enables the CIFS licensed function, which is designed to provide connectivity to client machines so that data can be transferred via the CIFS protocol. This feature is also used for maintenance billing purposes. The corequisite 2870 feature must be purchased to establish authorization for use of the CIFS licensed function before the feature activation code is provided by IBM. HTTP (#7003 and #7103) This feature enables the HTTP licensed function which is designed to provide data transfer to and from the N3400 storage controllers via the HTTP protocol. This feature is also used for maintenance billing purposes. NFS (#6004 and #6104) This feature enables the NFS licensed function provided you have applied a feature activation code that is made available by IBM. The NFS licensed function is designed to provide connectivity to client machines that transfer data via the NFS protocol. This feature is also used for maintenance billing purposes. CFO (#6105 A21 only) Installed on a pair of N series storage controllers, this feature is designed to enable the transfer of data service from an unavailable controller to the other controller in the cluster. It is designed to deliver a robust and highly available data service for businesscritical environments. FlexClone (#7011 and #7111) This feature enables the FlexClone licensed function provided you have applied a feature activation code that is made available by IBM. FlexClone is designed to enable true cloning nearinstant replication of data volumes and data sets without requiring additional storage space at the time of creation. This feature is also used for maintenance billing purposes. MultiStore (#7020 and #7120) This feature enables the MultiStore licensed function provided you have applied a feature activation code that is made available by IBM. MultiStore is designed to enable multiprotocol storage consolidation across enterprises. It is designed to provide partitioning of network and storage resources and enable multidomain and multiserver consolidation on a single storage appliance. In addition, it is designed to help reduce data management cost by introducing a tiered management model enabling costeffective administration. This feature is also used for maintenance billing purposes. Note: The combination of Fibre Channel Protocol (#7043 and #7143) and MultiStore (#7020 and #7120) is supported only on virtual filer 0. They are otherwise mutually exclusive IBM is a registered trademark of International Business Machines Corporation 11

12 NearStore (#7022 and #7122) This feature is designed to help optimize a storage controller for data protection and retention applications. It enables additional concurrent streams and SnapVault for NetBackup. iscsi Protocol (#7025 and #7125) This feature enables the iscsi Protocol licensed function, which is designed to provide connectivity to clients that transfer data via the iscsi protocol. You must apply a feature activation code made available by IBM. This feature is also used for maintenance billing purposes. SnapMirror/SnapVault Bundle (#7029 and #7129) This feature is a bundle of the SnapMirror and SnapVault Secondary features, designed to provide improved value for the combination. It is typically used by customers wanting to provide a mirrored, remote site for their data backup. This feature is designed to accomplish that by having the SnapVault function create an initial, local backup copy of the data, and then having the SnapMirror function copy the data to a remote site. SnapVault Primary and SnapManager are not included in this bundle. FlexCache for NFS (#7030 and #7130) FlexCache for NFS is designed to create a caching layer in your storage infrastructure that helps to eliminate performance bottlenecks in NFS environments. It is designed to replicate hot data sets to local caching volumes anywhere in the infrastructure. This is useful with NFS implementations in computeintensive applications, distributed computing environments, and reverse tiered storage. For additional detail and assistance with planning, it is highly recommended that you refer to the documentation for FlexCache. SnapMirror (#7031 and #7131) This feature enables the SnapMirror licensed function provided you have applied a feature activation code that is made available by IBM. SnapMirror is designed to replicate data between one or more N series storage controllers. It is designed to continually update the mirrored data to help keep it current and available for disaster recovery, offloading tape backup, readonly data distribution, testing on nonproduction systems, and online data migration. This feature is also used for maintenance billing purposes. SnapLock Compliance (#7032 and #7132) This feature enables the SnapLock Compliance licensed function provided you have applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes. SnapLock Enterprise (#7033 and #7133) This feature enables the SnapLock Enterprise licensed function provided you have applied a feature activation code that is made available by IBM. SnapLock Enterprise is designed to provide high performance and highsecurity data permanence to diskbased primary and secondary N3400 storage subsystems. An integrated element of the proven IBM Data ONTAP operating system, SnapLock software is designed to support the accuracy, integrity, and security of data by helping prevent the alteration of business records and allow rapid online access for long periods of time. SnapLock Enterprise allows administrators to delete entire SnapLock Enterprise volumes. However, it is designed to prevent any SnapLock Enterprise user or administrator from deleting or modifying individual SnapLock Enterprise WORM records. This feature is also used for maintenance billing purposes IBM is a registered trademark of International Business Machines Corporation 12

13 SnapMover (#7134 Model A21 only) This feature enables the SnapMover licensed function provided you have applied a feature activation code that is made available by IBM. SnapMover is designed to provide a nocopy data migration solution for workload distribution among N series storage controllers sharing common backend storage while avoiding impact to data availability and disruption to users. This helps organizations to efficiently address evolving storage and performance requirements while maintaining user productivity. This feature is also used for maintenance billing purposes. SnapRestore (#7035 and #7135) This feature enables the SnapRestore licensed function provided you have applied a feature activation code that is made available by IBM. SnapRestore is designed to help an enterprise to recover from data loss that may occur due to user error, viruses, or many other disasters. SnapRestore is designed to help users recover data, from individual files to multiterabyte volumes, using snapshot copies, to help allow quick resumption of operations. This feature is also used for maintenance billing purposes. SnapVault features SnapVault provides a centralized diskbased backup solution for heterogeneous storage environments. Storing backup data in multiple snapshot copies on the SnapVault secondary storage system from multiple SnapVault primary systems helps let enterprises keep weeks of backups online for fast restoration. Backing up multiple SnapVault primary storage systems to a single SnapShot copy on a large SnapVault secondary storage system can help allow enterprises to centralize their backup and restore operations in a single location. SnapVault primary storage systems can be local or remote N3400 storage controllers, Windows servers, or UNIX servers connected via a LAN or a WAN. The SnapVault secondary storage system can also be located at a remote disaster recovery site to help protect against production site failures. SnapVault Primary and SnapVault Secondary may be concurrently installed on an N3400 Model A21. This allows data to be backed up from one node of the Model A21 to the other node. Each must be installed on its own node, that is, SnapVault Primary must be installed on one of the two nodes and SnapVault Secondary on the other. They may never both be installed on the same node. Data ONTAP 7.2.1, or later, is required. SnapVault Primary (#7036 and #7136) This feature enables the SnapVault Primary licensed function provided you have applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes. SnapVault Secondary (#7037 and #7137) This feature enables the SnapVault Secondary licensed function provided you have applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes. SnapManager SAP Filer (#7038 and #7138) This feature is designed to allow SAP administrators to back up and restore an SAP System hosted on an Oracle Database. It is integrated with the interface for SAP tools for backup and recovery of SAP systems as well as with the N series data management tools. It is designed to simplify provisioning and data protection on enterprise SAP systems. This feature allows connectivity of any number of SAP servers to one storage controller. SnapDrive for UNIX (one of features #8024 through #8027) or SnapDrive for Windows is required IBM is a registered trademark of International Business Machines Corporation 13

14 SnapManager Oracle Filer (#7039 and #7139) IBM SnapManager for Oracle is designed to integrate with an Oracle Database and automate crucial tasks such as backup, restore, database recovery, and cloning. Note: FlexClone is required with NFS and is optional for FCP and iscsi environments. SnapRestore is always required with SnapManager for Oracle. When using iscsi or FCP, you must have the appropriate host support kit (iscsi downloadable) or FCP Host Attach Kit. This feature allows connectivity of any number of Oracle servers to one storage controller. SnapDrive for UNIX (one of features #8024 through #8027) or SnapDrive for Windows is required. SnapValidator (#6042 and #6142) This feature enables the SnapValidator licensed function provided you have applied a feature activation code that is made available by IBM. SnapValidator is tightly integrated with the Oracle Database architecture and complies with the Oracle Hardware Assisted Resilient Data (HARD) initiative. It is designed to detect and prevent potential corruptions of Oracle data before they happen. By adding intelligence and database awareness to modular storage systems (across SAN, isan, and NAS protocols), IBM N3400 SnapValidator helps to enable advanced database protection functionality to a broader array of organizations. This feature is also used for maintenance billing purposes. Fibre Channel Protocol (#7043 and #7143) This feature enables the Fibre Channel Protocol licensed function, which is designed to provide connectivity to client machines that transfer data via the FCP protocol provided you have applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes. Note: The combination of Fibre Channel Protocol (#7043 and #7143) and MultiStore (#7020 and #7120) is supported only on virtual filer 0. They are otherwise mutually exclusive. Disk Sanitization (#7044 and #7144) This feature enables the Disk Sanitization licensed function provided you have applied a feature activation code that is made available by IBM. This feature is also used for maintenance billing purposes. SnapManager/Exchange Filer (#7045 and #7145) This feature enables the SnapManager/Exchange Filer licensed function provided you have applied a feature activation code that is made available by IBM. IBM SnapManager for Microsoft Exchange is a comprehensive data management solution designed to streamline storage management while simplifying configuration, backup, and restore operations for Exchange databases. Deployed in combination with N3400 storage systems, SnapManager software is designed to provide nearinstantaneous hot backups and rapid restores to help you achieve a combination of availability, scalability, performance, and reliability for Exchange environments. This feature allows connectivity of any number of exchange servers to one N3400 storage controller. Note: SnapManager/Exchange Filer and SnapManager/Exchange Host (#8131) provide identical function but support different numbers of hosts. Only one or the other is needed, not both. SnapManager/Exchange Filer allows connectivity to any number of hosts, SnapManager/Exchange Host allows just one host connection. If the planned number of hosts to be supported, multiplied by the feature #8131 price, is greater than the price of SnapManager/Exchange Filer (#7045 or #7145), #7045 or #7145 may be a more costeffective choice. Other factors may influence this decision IBM is a registered trademark of International Business Machines Corporation 14

15 This feature requires either FCP or iscsi Protocol, and SnapRestore, SnapManager/ Exch Media Kit, and SnapDrive for Windows to be installed on the machine. This feature is also used for maintenance billing purposes. SnapManager/SQL Filer (#7046 and #7146) This feature enables the SnapManager/SQL Filer licensed function provided you have applied a feature activation code that is made available by IBM. IBM SnapManager for Microsoft SQL is a comprehensive data management solution designed to streamline storage management while simplifying configuration, backup, and restore operations for Exchange databases. Deployed in combination with N3400 storage systems, SnapManager software is designed to provide nearinstantaneous hot backups and rapid restores to help you achieve a combination of availability, scalability, performance, and reliability for SQL environments. This feature allows connectivity of any number of SQL servers to one N3400 storage controller. Note: SnapManager/SQL Filer and SnapManager for SQL Host (#8141) provide identical function but support different numbers of hosts. Only one or the other is needed, not both. SnapManager/SQL Filer allows connectivity to any number of hosts, SnapManager for SQL Host allows just one host connection. If the planned number of hosts to be supported, multiplied by the feature #8141 price, is greater than the price of SnapManager/SQL Filer (#7046 or #7146), #7046 or #7146 may be a more costeffective choice. Other factors may influence this decision. This feature requires either FCP or iscsi Protocol, and SnapRestore, SnapManager/ SQL Media Kit, and SnapDrive for Windows to be installed on the machine. This feature is also used for maintenance billing purposes. Deduplication (#7047 and #7147) This feature is designed to provide blocklevel deduplication within the entire flexible volume on an IBM N series storage controller that has the NearStore feature enabled. Deduplication only stores unique data blocks in the flexible volume and creates a small amount of additional metadata in the process. Each block of data has a digital "signature" that is compared to all other signatures in the flexible volume. If an exact byteforbyte block match exists on the flexible volume, the duplicate block is discarded and its disk space is reclaimed. SnapManager VI Filer (#7048 and #7148) IBM SnapManager for Virtual Infrastructures (SnapManager VI) is designed to integrate with a virtual server infrastructure and automate crucial tasks such as backup, restore, recovery, and cloning. It allows connectivity of any number of VMWare servers to one storage controller. SnapManager SharePointFiler (#7049 and #7149) This feature enables the SnapManager SharePointFiler licensed function provided the customer has applied a feature activation code that is made available by IBM. IBM SnapManager for Microsoft Office SharePoint Server (SMMOSS) is designed to enable a single console to manage diskbased backup and recovery of SharePoint content databases, portals, sites, subsites, folders, documents, and versions of documents. Deployed in combination with an N series storage system, SnapManager software is designed to provide nearinstantaneous hot backups and rapid restores to help you achieve a combination of availability, scalability, performance, and reliability for SharePoint environments. This feature is designed to allow connectivity of any number of Microsoft Office SharePoint servers to one N series storage system. It is also used for maintenance billing purposes IBM is a registered trademark of International Business Machines Corporation 15

16 SnapManager HyperV Filer (#7050 and #7150) These features are designed to integrate with the Microsoft HyperV virtual server infrastructure and automate crucial tasks such as backup, restore, recovery, and cloning. It allows connectivity of any number of Microsoft HyperV servers to one storage controller. SnapDrive for UNIX Filer (#7076 and #7176) This feature is designed to provide software that enhances the storage management capability of UNIXbased systems, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature allows the connection of any number of hosts to the licensed storage controller. SnapDrive for Win Filer (#7077 and #7177) This feature is designed to provide software that enhances the storage management capability of Windowsbased systems, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature allows the connection of any number of hosts to the licensed storage controller. Host software Note: For all host software, the corequisite 2870 feature must be purchased to establish authorization for use of the corresponding licensed function before the feature activation code is provided by IBM. SnapDrive for UNIX AIX (#8024) This feature is designed to provide a software application that enhances the storage management capabilities in a AIX environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed. SnapDrive for UNIX Solaris (#8025) This feature is designed to provide a software application that enhances the storage management capabilities in a Solaris environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed. SnapDrive for UNIX HPUX (#8026) This feature is designed to provide a software application that enhances the storage management capabilities in a HPUX environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed. SnapDrive for UNIX Linux (#8027) This feature is designed to provide a software application that enhances the storage management capabilities in a Linux environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. One feature must be ordered for each host on which it will be installed. SnapDrive for Windows (#8050) This feature provides SnapDrive for Windows function. One feature must be ordered for each host on which it will be installed. It provides a software application that is designed to enhance the storage management capability in a Windows IBM is a registered trademark of International Business Machines Corporation 16

17 environment, including easier management of dynamic volume management, cluster management, snapshot management, and replication management. Note: Feature number 8052 is highly recommended when using feature number 8050 with FCP. Note: If running with FCP, feature #8100 is a corequsite. If running with iscsi, the iscsi Host Support Kit is required. The iscsi Host Support Kit is available for download from ONTAP DSM for Windows MPIO (#8052) This feature provides the multipathing MPIO driver for FC data transmission in Windows environments connected to N series machines. It is required when FC multipathing function is required. Note: Feature number 8052 is highly recommended when using feature number 8050 with FCP. SnapManager/Oracle WIN (#8129) IBM SnapManager for Oracle is designed to integrate with an Oracle Database and automate crucial tasks such as backup, restore, database recovery, and cloning. This feature allows connection of one Oracle host server to a storage controller. One of this feature is required for each Oracle host. Snapmanager for Oracle for Windows is available for Oracle databases running on Windows. SnapManager/Exchange Host (#8131) This feature allows connection of one exchange host server to a storage controller. One of this feature is required for each exchange host. The Fibre Channel Protocol feature or iscsi must be installed on the attached storage controller. Note: SnapManager/Exchange Host and SnapManager/Exchange Filer (#7045 or #7145) provide identical function but support different numbers of hosts. Only one or the other is needed, not both. SnapManager/Exchange Filer allows connectivity to any number of hosts, SnapManager/Exchange Host allows just one host connection. If the planned number of hosts to be supported, multiplied by the feature #8131 price, is greater than the price of SnapManager/Exchange Filer (#7045 or #7145), #7045 or #7145 may be a more costeffective choice. Other factors may influence this decision. This feature requires either FCP or iscsi Protocol, and SnapRestore, SnapManager/ Exch Media Kit, and SnapDrive for Windows to be installed on the machine. SnapManager VI Host (#8133) This feature provides SnapManager function for Virtual Infrastructure (VI) environments, utilizing the VMWare system. It is designed to provide snapshot management for any number of N series controllers attached to a single VMWare host. SnapMgr HyperV Host (#8135) This feature is designed to integrate with the Microsoft HyperV virtual server infrastructure and automate crucial tasks such as backup, restore, recovery, and cloning. It allows one Microsoft HyperV server to connect to any number of N series controllers. Note: Use of this feature with FCP requires the FCP protocol feature, the host attach kit for the appropriate hosts, and one of the SnapDrive for Windows features. If running with iscsi, the iscsi protocol feature and appropriate iscsi host attach kit are required. SnapManager for SAP Win (#8140) This feature is designed to allow SAP administrators in Windows environments to back up and restore a SAP System hosted on an Oracle Database. It is integrated IBM is a registered trademark of International Business Machines Corporation 17

18 with the interface for SAP tools for backup and recovery of SAP systems as well as with the N series data management tools. It is designed to simplify provisioning and data protection on enterprise SAP systems. This feature includes feature #8050, SnapDrive for Windows. One of this feature must be ordered for each host on which it will be installed. Note: SnapRestore is always required with SnapManager for SAP. The necessary SnapDrive code and license are included as part of the SnapManager for SAP feature. SnapManager for SQL Host (#8141) This feature allows connection of one SQL host server to a storage controller. One of this feature is required for each SQL host. The Fibre Channel Protocol feature or iscsi must be installed on the attached storage controller. Note: SnapManager for SQL Host and SnapManager/SQL Filer (#7046 or #7146) provide identical function but support different numbers of hosts. Only one or the other is needed, not both. SnapManager/SQL Filer allows connectivity to any number of hosts, SnapManager for SQL Host allows just one host connection. If the planned number of hosts to be supported, multiplied by the feature #8141 price, is greater than the price of SnapManager/SQL Filer (#7046 or #7146), #7046 or #7146 may be a more costeffective choice. Other factors may influence this decision. This feature requires either FCP or iscsi Protocol, and SnapRestore, and SnapDrive for Windows to be installed on the machine. SnapManager for Oracle (#8143) IBM SnapManager for Oracle is designed to integrate with an Oracle Database and automate crucial tasks such as backup, restore, database recovery, and cloning. This feature allows connection of one Oracle host server to a storage controller. One of this feature is required for each Oracle host. Note: FlexClone is required with NFS and is optional for FCP and iscsi environments. SnapRestore (#7035 and #7135) is always required with SnapManager for Oracle. The necessary SnapDrive code and license are included as part of the SnapManager for Oracle feature. When using iscsi or FCP, you must have the appropriate host support kit (iscsi downloadable) or FCP attach kit (downloadable) available. SnapManager for Oracle requirements vary depending on the host OS. For full details on supported operating system levels, Oracle database levels, and other SnapManager for Oracle requirements, refer to the N series interoperability matrix at SnapManager for SAP (#8145) This feature is designed to allow SAP administrators to back up and restore a SAP System hosted on an Oracle Database. It is integrated with the interface for SAP br* tools for backup and recovery of SAP systems as well as with the N series data management tools. It is designed to simplify provisioning and data protection on enterprise SAP systems. This feature includes feature #8040 and SnapManager for Oracle (#8143). Features #8024 through #8027 and #8143 need not be ordered if SnapManager for SAP (#8145) is ordered. One of this feature must be ordered for each CPU on each host on which it will be installed. Note: FlexClone is required with NFS and is optional for FCP and iscsi environments. SnapRestore (#7035 and #7135) is always required with SnapManager for Oracle. The necessary SnapDrive code and license are included as part of the SnapManager for Oracle feature. When using iscsi or FCP, you must IBM is a registered trademark of International Business Machines Corporation 18

19 have the appropriate host support kit (iscsi downloadable) or FCP attach kit (downloadable) available. SnapManager SharePointHost (#8147) This feature enables the SnapManager SharePointHost licensed function provided the customer has applied a feature activation code that is made available by IBM. IBM SnapManager for Microsoft Office SharePoint Server (SMMOSS) is designed to enable a single console to manage diskbased backup and recovery of SharePoint content databases, portals, sites, subsites, folders, documents, and versions of documents. Deployed in combination with an N series storage system, SnapManager software is designed to provide nearinstantaneous hot backups and rapid restores to help you achieve a combination of availability, scalability, performance, and reliability for SharePoint environments. This feature is designed to allow connectivity to a single Microsoft Office SharePoint CPU to one N series storage system. It is also used for maintenance billing purposes. SM SharePoint Mgmt. Bundle (#8149) This feature includes SnapManager for SQL Host (#8141), SnapManager SharePointHost (#8147), and SnapDrive for Windows (#8050). It is a feature bundle designed to simplify the feature ordering for SM Sharepoint environments. Single Mailbox Recovery Single Mailbox Recovery for Microsoft Exchange (SMBR) software is designed to provide rapid recovery of single mailboxes, individual folders, or single messages from a valid SnapManager backup to the production Exchange server, to any offline Exchange server, or to an Outlook.pst file. The software can help save time and money by avoiding the need for cumbersome and diskintensive bricklevel backups or investments in a dedicated recovery server infrastructure. Single Mbox Recovery 100pk (#8150) This feature provides support for 100 mailboxes. Single Mbox Recovery 500pk (#8151) This feature provides support for 500 mailboxes. Single Mbox Recovery 1000pk (#8152) This feature provides support for 1,000 mailboxes. Single Mbox Recovery 2500pk (#8153) This feature provides support for 2,500 mailboxes. Single Mbox Recovery 5K pk (#8154) This feature provides support for 5,000 mailboxes. Single Mbox Recovery 10K pk (#8155) This feature provides support for 10,000 mailboxes. Single Mbox Recovery 50K pk (#8156) This feature provides support for 50,000 mailboxes. SMBR CAARCSERVE Extract Wiz (#8158) The CAARCSERVE Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any IBM is a registered trademark of International Business Machines Corporation 19

20 alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server. SMBR Tivoli Tape Extract Wiz (#8159) The Tivoli Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server. SMBR Legato Tape Extract Wiz (#8160) The Legato Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server. SMBR NetBackup Extract Wiz (#8161) The NetBackup Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server. SMBR PST Tape Extract Wiz (#8162) The PST Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server. SMBR HP Extract Wiz (#8163) The HP Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server. SMBR Commvault Galaxy Ex Wiz (#8164) The Commvault Galaxy Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server. SMBR UltraBac Extract Wizard (#8165) The UltraBac Extract Wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server. SMBR Agent for Adv Search (#8166) The SMBR Agent for Advanced Search is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, helping eliminate the need for a recovery server. SMBR Content Analysis Wizard (#8167) The SMBR Content Analysis Wizard (CAW) is designed to enable you to automate and save search results with Microsoft Exchange by selecting sources, including entire Exchange Database (EDB) files, individual mailboxes from an EDB, or folders from an EDB. Any number of sources is allowed, including multiple EDBs IBM is a registered trademark of International Business Machines Corporation 20