Chiara LED Design by Ares Concept

Transcription

1 Chiara 148

2 Chiara LE esign by Ares Concept 67 Round recessed luinaire for outdoor installation on wall and ground. Configuration: die-cast aluiniu structure. EN A alloy (low copper content) ouble layer coating for high resistance to corrosion: The low copper Aluiniu alloy is painted with a double coat using powders which are coplaint with QUALICOAT standards: a first layer of epoxy powder (with excellent cheical and echanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atospheric agents).the entire painting process of the aluiniu fitting starts fro coponents which have been sand-blasted in advance to ake the surface ore porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces copletely, then rinses with deineralised water to reove any residue particles, subsequently a cheical conversion treatent is done to protect against rusting. Sandblasted glass with silkscreen border, AISI 316L blasted stainless steel frae. Glass fixed to the aluiniu body through a robotic gluing syste Protection Rating: IP67 In copliance with EN Class of insulation: ains: I; low-voltage: III Installation: the luinaire is equipped with a plastic cable gland and a piece of cable for an easy-to-ake connection. Installation requires a dedicated box to be ordered separately. It is iportant to provide a >200 gravel layer or a drain syste (for concrete surface) to ensure good drainage and to avoid water stagnation. We recoend the use of a connection syste with a protection degree greater than or equal to the protection degree of the luinaire. The luinaire is supplied with a 2-way terinal block for 3-conductor cables - IP68 (IRECT 230V version) EU Regulation 874/ Illuination equipent energy classes A ++ A + A LE VERSION: Class A/A+/A++ Luinaire supplied with integrated LE odules which cannot be replaced 0. Inox Recessed ground fitting Recessed wall fitting o not install in hollow areas Installation requires a 20c water drainage layer (gravel) Pre-wired with approx 250 of cable. Reote device required.for 24V version kg Protection against water ingress fro the cable Static load: 500Kg walk over Glass surface teperature <70 C for LE source Protection against ipact. IK 08-5,00 joule

3 Chiara Mid-Power LE / Stainless Steel Frae - Sandblasted Glass A A + A ++ COOL WHITE 6000K MI-POWER LEs 7W/ V Total power 7W LE l 630 FIXT l 543 CRI>70 Led odule set up to work directly connected to the ains = = A A + A ++ NATURAL WHITE 4000K MI-POWER LEs 7W/ V Total power 7W LE l 555 FIXT l 479 CRI> Led odule set up to work directly connected to the ains Ø MI-POWER LE IRECT 230V A A + A ++ WARM WHITE 3000K MI-POWER LEs 7W/ V Total power 7W LE l 525 FIXT l 453 CRI> Led odule set up to work directly connected to the ains A A + A ++ COOL WHITE 6000K MI-POWER LEs 7W/24Vdc Total power 7,3W LE l 761 FIXT l 409 CRI>70 Reote electronic power supply to be ordered Acc. 144 or = = Ø MI-POWER LE A A + A ++ NATURAL WHITE 4000K MI-POWER LEs 7W/24Vdc Total power 7,3W LE l 734 FIXT l 394 CRI> Reote electronic power supply to be ordered Acc. 144 or A A + A ++ WARM WHITE 3000K MI-POWER LEs 7W/24Vdc Total power 7,3W LE l 707 FIXT l 308 CRI> Reote electronic power supply to be ordered Acc. 144 or

4 Accessories: Chiara LE 50 OX FOR INSTALLATION Ø 160 H /4 way terinal block 3 poles IP68 (Ø5,5 12 cable) 87 POWER SUPPLY 10W/ V - 24Vdc IP20 CLASS II SELV. 175 POWER SUPPLY 10W/ V - 24Vdc IP67 CLASS II SELV. 70 Ø 115 Ø POWER SUPPLY 17W/ V - 24Vdc (15W@110V) IP20 CLASS II SELV. 176 POWER SUPPLY 17W/ V - 24Vdc (15W@110V) IP67 CLASS II SELV. 147 POWER SUPPLY 20W/ V - 24Vdc IP67 CLASS II SELV. 155 POWER SUPPLY 50W/ 240V - 24Vdc IP67 CLASS II SELV IMMALE: PUSH-IM OR V See Page 628 Wiring iagra n.4 IMMALE: PUSH-IM OR V See Page 628 Wiring iagra n POWER SUPPLY 100W / 240V - 24Vdc IP67 CLASS II SELV POWER SUPPLY 70W/ V - 24Vdc IP67 CLASS II SELV EQ SP: (SURGE PROTECTION EVICE) 275Vac MAXIMUM ISCHARGE CURRENT 10KA (8/20μs) MAXIMUM OPERATING CURRENT 5A SUITALE FOR SERIES CONNECTION - IP Accessories chart acc. code prod. code

5 Clio 152

6 Clio esign by Ares Concept 67 Round recessed luinaire for outdoor installation in wall and ground. Configuration: die-cast aluiniu structure. EN A alloy (low copper content) ouble layer coating for high resistance to corrosion: The low copper Aluiniu alloy is painted with a double coat using powders which are coplaint with QUALICOAT standards: a first layer of epoxy powder (with excellent cheical and echanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atospheric agents).the entire painting process of the aluiniu fitting starts fro coponents which have been sand-blasted in advance to ake the surface ore porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces copletely, then rinses with deineralised water to reove any residue particles, subsequently a cheical conversion treatent is done to protect against rusting. Tepered transparent or sandblasted glass, oulded silicone gasket, aluiniu or AISI 316L stainless steel frae. Protection Rating: IP67 In copliance with EN standards Class of insulation: ains: I; low voltage: III Installation: the luinaire is equipped with M16x1,5 plastic cable gland and a piece of cable for an easy-to-ake connection. Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. Installation requires a dedicated box to be ordered separately. It is iportant to provide a >300 gravel layer or a drain syste (for concrete surface) to ensure good drainage and to avoid water stagnation. We recoend the use of a connection syste with a protection degree greater than or equal to the protection degree of the luinaire. The luinaire is supplied with a 2-way terinal block for 3-conductor cables - IP68 EU Regulation 874/ Illuination equipent energy classes A LE UL VERSION: Class LE UL A VERSION: RR/GU5,3 Class A R-PAR/GZ10 HALOGEN VERSION: Class QR-CC51/GU5,3 HALOGEN VERSION: Class QRPARCC51/GZ10 1. White 2. Aluiniu 3. Anthracite 4. lack 9. Rust-red Recessed ground fitting o not install in hollow areas Installation requires a 30c water drainage layer (gravel) Pre-wired with approx 250 of cable Reote device required Protection against ipact. IK 09-10,00 joule kg Protection against water ingress fro the cable Static load: 1000Kg walk over (Ø version) Static load: 1500Kg walk over (Ø 130 version) Check that diffuser s teperature T ax C (tested at 25 C) coplies with your local regulation

7 Clio / Ø - Aluiniu Frae - Transparent Glass - Fixed Syetric Optic QPAR CC 51 50W/230V GZ10 R PAR 7,5W/230V GZ10 Lap ax size: Ø50 H.58 Photoetric curve not available RR 6,5W/12V a.c. GU5,3 Lap ax size: Ø50 H.48 Reote transforer to be ordered Photoetric curve not available QR CC 51 50W/12V GU5,3 Reote transforer to be ordered bea bea 38 Ø SUPPLY ACCORING TO THE LE UL. Clio / Ø - Aluiniu Frae - Transparent Glass - Adjustable Optic QPAR CC 51 50W/230V GZ10 R PAR 7,5W/230V GZ10 Lap ax size: Ø50 H.58 Photoetric curve not available QR CC 51 50W/12V GU5,3 Reote transforer to be ordered bea RR 6,5W/12V a.c. GU5,3 Lap ax size: Ø50 H.48 Reote transforer to be ordered Photoetric curve not available bea 38 Ø SUPPLY ACCORING TO THE LE UL. Clio / Ø - Aluiniu Frae - Sandblasted Glass - Fixed Syetric Optic QPAR CC 51 50W/230V GZ10 R PAR 7,5W/230V GZ10 Lap ax size: Ø50 H.58 Photoetric curve not available 5 Ø 154 SUPPLY ACCORING TO THE LE UL QR CC 51 50W/12V GU5,3 Reote transforer to be ordered RR 6,5W/12V a.c. GU5,3 Lap ax size: Ø50 H.48 Reote transforer to be ordered Photoetric curve not available

8 Clio / Ø Stainless Steel Frae - Transparent Glass - Fixed Syetric Optic INOX ONLY QPAR CC 51 50W/230V GZ10 R PAR 7,5W/230V GZ10 Lap ax size: Ø50 H.58 Photoetric curve not available RR 6,5W/12V a.c. GU5,3 Lap ax size: Ø50 H.48 Reote transforer to be ordered Photoetric curve not available QR CC 51 50W/12V GU5,3 Reote transforer to be ordered bea bea 38 Ø 130 SUPPLY ACCORING TO THE LE UL.. Clio / Ø Stainless Steel Frae - Transparent Glass - Adjustable Optic INOX ONLY QPAR CC 51 50W/230V GZ10 R PAR 7,5W/230V GZ10 Lap ax size: Ø50 H.58 Photoetric curve not available QR CC 51 50W/12V GU5,3 Reote transforer to be ordered bea RR 6,5W/12V a.c. GU5,3 Lap ax size: Ø50 H.48 Reote transforer to be ordered Photoetric curve not available bea 38 Ø 130 SUPPLY ACCORING TO THE LE UL. Clio / Ø Stainless Steel Frae - Sandblasted Glass - Fixed Syetric Optic INOX ONLY QPAR CC 51 50W/230V GZ10 R PAR 7,5W/230V GZ10 Lap ax size: Ø50 H.58 Photoetric curve not available 3 Ø QR CC 51 50W/12V GU5,3 Reote transforer to be ordered RR 6,5W/12V a.c. GU5,3 Lap ax size: Ø50 H.48 Reote transforer to be ordered Photoetric curve not available SUPPLY ACCORING TO THE LE UL

9 Accessories: Clio 20 OX FOR INSTALLATION Ø 175 H /4 way terinal block 3 poles IP68 (Ø5,5 12 cable) Ø Ø TRANSFORMER 50W 230V/12V 50Hz IP TRANSFORMER 200W 230V/12V 50Hz IP Ø TRANSFORMER 300W 230V/12V 50Hz IP Ø 140 Accessories chart acc. code prod. code

10 157