ISO Cylinders. ISO Cylinders. Wide range and fast delivery

Transcription

1 ISO Cylinders ISO Cylinders Wide range and fast delivery

2 WIDE RANGE: Our ISO Cylinders take standardisation to another level SMC presents you our full range of standardscomplying cylinders: tierod, compact and round crimped body cylinders which observe standards ISO 15552, ISO 31, ISO 27 and ISO 32 respectively. Nevertheless, in SMC, standard does not mean basic and we provide our ISO standard cylinders with additional features so they can adapt to your more particular demands: Wide range of mounting accessories It is possible to mount the cylinders practically everywhere Many options available as standard: ATEX compliant to be used in potentially explosive atmospheres, high and low temperature resistance or intermediate s, among others (detailed information in the inside). Because the applications are not always standard. FAST DELIVERY: SMC is close to you with ISO Close to you with ISO Immediate Shipping & Fast Delivery At our European Central Warehouse placed in Antwerp we stock more than 1300 standard ISO Cylinder references (detailed information in the inside). Close to you with Semicustomised ISO Production time: from 3 to 5 days Our newly opened Czech Republic Factory counts with the most modern facilities and highly qualified personnel to adapt our ISO range to your requirements (detailed information in the inside). Close to you with Customised ISO Production time: from 1 to days If you require a fully customised ISO, SMC s local facilities will adapt any of our ISO range to your specific demands. (detailed information in the inside). SMC s ISO Range a Quick view ISO / ISO 31 Tie Rod Cylinders C(P)9/C95 series ISO C5 series Round Crimped Body Cylinders ISO 32 ISO 27 Compact Body Cylinders C55 series ISO C9 & CP9 Series ISO 31 C95 Series Profile & Round Tube TieRod Cylinder The ISO cylinder with more standard options With an easy adjustment of the cushion valve and a maximum flexibility for auto switch mounting on all four sides, C(P)9C95 series achieve the best performance for both standard and specific applications. It can even be used in extreme environments or special conditions, for example: in smooth movements at low pressure, explosive atmospheres, places at high or low temperatures, dusty environments and areas subject to water splashing, among others. ISO 27 C55 Series Compact Body cylinder When space is a problem If you don't find any cylinder that fits in that small place, C55 series is your solution. Designed in bores from Ø20 to Ø0, it now offers an improved and flush auto switch mounting possibilities with slide in grooves which can accommodate auto switches on all four cylinder sides without the need for auto switch brackets. There is also an option for explosive atmosphere. ISO 32 C5 Series Round Crimped Body cylinder A clean profile for dusty environments The lightweight C5 has a unique rod packing design that prevents the entry of dust and its effectiveness of the seal is such that it is suitable for use in dusty environments, regardless of whether the environments are at high or low temperatures, or if you need to move slowly or work in explosive atmospheres. depending on model and quantity 2

3 ISO Cylinder, Series Variations and Index ISO TieRod Cylinder Series CP9 C9 55CP9 (ATEX) 55C9 (ATEX) Type NonRotating NonRotating Smooth NonRotating NonRotating Smooth Action Maximum mm mm mm mm mm mm mm mm mm mm Page CP9 and C9 Related products 7 ISO 31 TieRod Cylinder C95 55C95 (ATEX) C95 Related products 200 mm 9 ISO 32 Round Crimped Body cylinder C5 55C5 (ATEX) NonRotating Direct Mount NonRotating Single acting, Single acting, 300 mm 300 mm 150 mm 300 mm 150 mm 10 mm 300 mm 300 mm 300 mm mm 500 mm 150 mm mm 150 mm mm mm 500 mm mm 11 C5 Related products 13 ISO 27 Compact cylinder C55 55C55 (ATEX) C55 Related products 150 mm 150 mm Related products Other noniso cylinders

4 Series CP9 ISO Series C9 ISO ISO [ISO 15552]. Tie rod cylinder / Non Rotating / Smooth type Double Acting, Single/Double Rod Series CP9C9 ø32, ø0, ø50, ø3, ø0, ø0, ø5 Double Acting Double Acting Light weight Easy and fine adjustment of the air cushion valve Minimum piston rod deflection Wide range of made to order specifications s up to mm Operating piston speed up to mm/s ATEX compliant version for explosive atmospheres Possible to mount directly round DM9 auto switches on the surfaces of the CP9 Nonrotating Double Acting Smooth cylinder Double Acting Nonrotating Double Acting How to Order Profile cylinder Round tube cylinder CP9 S D B 32 0 W C9 S D Type S K Nonrotating rod Y Note) Smooth cylinder Note) For C9 only Builtin magnet Mounting B Basic/Without bracket T Note) Centre trunnion Note) For C9 only CP9 Note) , 50, 0, 0, 5, 10, 200, 250, 320, 00, , 50, 0, 0, 5, 10, 200, 250, 320, 00, , 50, 0, 0, 5, 10, 200, 250, 320, 00, 500, 00 25, 50, 0, 0, 5, 10, 200, 250, 320, 00, 500, 00 25, 50, 0, 0, 5, 10, 200, 250, 320, 00, 500, 00, 700, 00 25, 50, 0, 0, 5, 10, 200, 250, 320, 00, 500, 00, 700, 00 Intermediate s are available Note) Please consult with SMC for longer s C9 Note) B Note) 32 mm 0 mm 50 mm m 0 mm 0 mm 5 mm Note) Not available in nonrotating type CP9 Note) C9 Note) C(P)9K Note) C9Y Note) W Made to order Note) Note) Only for standard type except for the XA0~30, which is also possible in the smooth type (Refer to Made to order table in next page) Rod boot J JJ K KK Only for type In case of double rod X option combinations available to order Symbol XA XC1 XB XA XC1 XB XC7 XC22 X XC7 XC22 XC Rod W Note) Note) Not available in Smooth cylinder Without boot Nylon tarpaulin (one end) Nylon tarpaulin (both ends) Heat resistant tarpaulin (one end) Heat resistant tarpaulin (both ends) : Combination possible to produce X: Combination possible to produce but contact with SMC : Combination not produced Only for without magnet type If XC1A (trunnion next to the rod end) or XC1B (trunnion next to the head end) are required, the X combination is considered as If you want to order a combination of non Simple Special options, just add the X options by alphabetical order at the end of the part number, for example: XC7C22 or XC1AC

5 Made to order Symbol Details How to order C9 CP9 Change of rod end shape Please use SMC's simple special system and configurators Change of trunnion bracket position Please use SMC's simple special system and configurators Note 5) Heat resistant cylinder ( ~150 C) C(P)9S(W)XB Note 5) Cold resistant cylinder ( 0~70 C) C9SBXB7 With Heavy Duty Scraper (protection against particles) C(P)9SD(W)XC Tie rod, cushion valve, and tie rod nut, made of stainless steel C(P)9SD(W)XC7 Dual cylinder / type (back to back) C(P)9SD+XC Dual Cylinder/Single Rod Type (in line) C(P)9SD+XC11 Fluoro rubber seals (for chemical splashes) With Coil Scraper (when frost, weld spatter or others adhere to rod) Piston rod, and rod end nut made of stainless steel C(P)9SD(W)XC22 C(P)9SD(W)XC35 C(P)9SD(W)XC XA0~30 XC1 XB XB7 XC XC7 Note 3) XC XC11 XC22 XC35 Note ) XC For XB7 and XC11 in a double rod cylinder, please consult SMC ø0 Note 3) XC is not possible for double rod cylinder Note ) Maximum s differ from the standard in the single rod types. In CP9 ø32: 0, in CP9 and C9 ø0 to ø0: 1700 and in CP9 and C9 ø5: 100 Note 5) Not possible with the built in magnet type, so do not add the D in the part number Specifications / Non Rotating type Action Fluid Proof pressure operating pressure Min. operating pressure Ambient and fluid temperature Lubrication Double acting Air 1.5 MPa 1.0 MPa 0.05 MPa Without auto switch: 20 to 70 C (No freezing) Note) With auto switch: to 0 C (No freezing) Not required (Nonlube) Operating piston speed Cushion 50 to mm/s Both ends (Air cushion) 50 to 700 mm/s NonRotating accuracy ±0.5 ±0.5 ±0.3 Not possible Note) ATEX version: to 0 C (No freezing) Smooth type Action Fluid Proof pressure operating pressure Min. operating pressure Ambient and fluid temperature Lubrication Operating piston speed Cushion Allowable air leak Double acting Air 1.05 MPa 0.7 MPa 0.02 MPa 0.01 MPa Without auto switch: to 70 C (No freezing) Note) With auto switch: to 0 C (No freezing) Not required (Nonlube) 5 to 500 mm/s Non 0.5 L/min (ANR) Availability: Stocked items for fast delivery & Manufacturing (European and Local) Stocked items for fast delivery Part Number CP9SDB32 CP9SDB0 CP9SDB50 CP9SDB3 CP9SDB0 CP9SDB0 CP9SDB5 () 25, 0, 50, 0, 75, 0, 0, 5, 150, 10,, 200, 250, 300, 320, 350, 00, 50, 500, 550, 00, 50, 700, 750, 00, 900, 25, 0, 50, 0, 75, 0, 0, 5, 150, 10,, 200, 250, 300, 320, 350, 00, 50, 500, 550, 00, 50, 700, 750, 00, 900, 25, 0, 50, 0, 75, 0, 0, 5, 150, 10,, 200, 250, 300, 320, 350, 00, 50, 500, 550, 00, 50, 700, 750, 00, 900, 25, 0, 50, 0, 75, 0, 0, 5, 150, 10,, 200, 250, 300, 320, 350, 00, 50, 500, 550, 00, 50, 700, 750, 00, 25, 0, 50, 0, 75, 0, 0, 5, 150, 10, 200, 250, 300, 320, 350, 00, 50, 500, 00, 700, 00, 25, 50, 0, 75, 0, 0, 5, 150, 10,, 200, 250, 300, 320, 350, 00, 50, 500, 00, 700, 00, 50, 0, 5, 200, 500 Stocked items could be subject to change without prior notice European Manufacturing 3 days Production: Stocked items for fast delivery Intermediate s Part Number () Longer than standard s C9SDB32 25, 50, 0, 0, 5, 10, 200, 250, 300, 320, 00, 500 C9SDB0 25, 50, 0, 0, 5, 10, 200, 250, 300, 320, 00, 500 C9SDB50 25, 50, 0, 0, 5, 10, 200, 250, 300, 320, 00, 500 C9SDB3 25, 50, 0, 0, 5, 10, 200, 250, 300, 320, 00, 500, 00 C9SDB0 25, 50, 0, 0, 5, 10, 200, 250, 320, 00, 500, 00, 700, 00 C9SDB0 25, 50, 0, 0, 5, 10, 200, 250, 320, 00, 500, 00, 700, 00 Stocked items could be subject to change without prior notice For emergency orders or other delivery dates, please consult with SMC For orders up to pcs, delivery dates are a guideline 5 days Production: Non Rotating cylinder cylinder + Non Rotating cylinder Smooth cylinder ATEX compliant version Change of rod end shape XA0~30 Heat resistant cylinder ( ~ 150ºC) XB Cold resistant cylinder (0 ~ 70ºC) XB7 Tie rod, cushion valve and tie rod nut made of stainless steel XC7 Piston rod and rod end nut made of stainless steel XC Local Manufacturing (from 1 to days Production): Customised C(P)9 5

6 Series CP9 ISO Series C9 ISO ATEX compliant version (ATEX directive category 2) Classification II 2 GD c With magnet type D T 5 C (T5) Ta C to 0 C T 5 C (T) Ta 0 C to 0 C How to Order Profile cylinder 55CP9 S D B 32 0 W Round tube cylinder 55 C9 S D B 32 0 W ATEX category 2 Type S K Nonrotating rod Y Note) Smooth cylinder Note) For C9 only Builtin magnet Mounting B Basic/Without bracket T Note) Centre trunnion Note) For C9 only Note) 32 mm 0 mm 50 mm m 0 mm 0 mm 5 mm Note) Not available in nonrotating type Rod W Note) Note) Not available in smooth cylinder (Refer to table below) Made to order Note) Note) Only for type except for the XA0~30, which is also possible in the smooth type (Refer to Made to order table below) 32 25, 50, 0, 0, 5, 10, 200, 250, 320, 00, , 50, 0, 0, 5, 10, 200, 250, 320, 00, , 50, 0, 0, 5, 10, 200, 250, 320, 00, 500, , 50, 0, 0, 5, 10, 200, 250, 320, 00, 500, , 50, 0, 0, 5, 10, 200, 250, 320, 00, 500, 00, 700, , 50, 0, 0, 5, 10, 200, 250, 320, 00, 500, 00, 700, 00 5 Intermediate s are available Note) Please consult with SMC for longer s CP9 Note) C9 Note) CP9 Note) C9 Note) C(P)9K Note) C9Y Note) Made to order Symbol Details How to order C9 CP9 Change of rod end shape Please use SMC's simple special system and configurators Change of trunnion bracket position Please use SMC's simple special system and configurators With Heavy Duty Scraper (protection against particles) C(P)9SD(W)XC Tie rod, cushion valve, and tie rod nut, made of stainless steel Fluoro rubber seals (for chemical splashes) Piston rod, and rod end nut made of stainless steel C(P)9SD(W)XC7 C(P)9SD(W)XC22 C(P)9SD(W)XC XA0~30 XC1 XC XC7 XC22 XC ø0 The maximum s differ from the standard in the single rod types. In CP9 ø32: 0, in CP9 and C9 ø0 to ø0: 1700 and in CP9 and C9 ø5: 100

7 CP9 and C9 Accesories/Related Products Speed controllers CP9 series C9 series , 50 3, 0 0, 5 Foot (Supplied with two pieces and screws) ø tube 3,2 L5032 L500 L5050 L503 L500 L50 L55 Male head Male head Rod/Head Angled head Angled head Piston rod Floating end clevis (Supplied with screws) end clevis end flange (Supplied with screws) end clevis end clevis with ball joint ball joint (ISO 139) joint Female head end clevis (Corresponds to E accessory) (Supplied with bolt, safety device and screws) D5032 D500 D5050 D503 D500 D50 D55 Speed controller elbow type AS2201F0123A AS2201F010SA AS2201F010SA AS2201F010SA AS2201F020SA AS2201F020SA AS2201F020SA AS2201F02SA AS3201F030SA AS3201F030SA AS3201F03SA AS3201F03SA AS201F0SA AS201F0SA C5032 C500 C5050 C503 C500 C50 C55 Female head end clevis (for ES accessory) (Supplied with bolt, safety device and screws) DS5032 DS500 DS5050 DS503 DS500 DS50 DS55 with ball joint (Supplied with screws) CS5032 CS500 CS5050 CS503 CS500 CS50 CS55 F5032 F500 F5050 F503 F500 F50 F55 E5032 E500 E5050 E503 E500 E50 E55 ES5032 ES500 ES5050 ES503 ES500 ES50 ES55 KJD KJD KJ1D KJ1D KJ20D KJ20D KJ27D Dual speed Air saving valve Air saving valve controller Pressure valve Flow valve Speed controller universal type AS2301F0123 AS2301F010S AS2301F010S AS2301F010S AS2301F020S AS2301F020S AS3301F020S AS3301F02S AS3301F02S AS3301F030S AS3301F030S AS3301F03S AS3301F03S AS301F0S AS301F0S ASD330F010S ASD330F010S ASD30F020S ASD530F020S ASD530F02S ASD530F02S ASD530F030S ASD530F030S ASD530F03S ASD530F03S ASD30F0S ASD30F0S ASR30F020S ASR530F020S ASR530F02S ASR530F02S ASR530F030S ASR530F030S ASR530F03S ASR530F03S ASR30F0S ASR30F0S ASQ30F020S ASQ530F020S ASQ530F02S ASQ530F02S ASQ530F030S ASQ530F030S ASQ530F03S ASQ530F03S ASQ30F0S ASQ30F0S 32 0, , 0, 5 Speed controller inline type ø Part No. tube Rod clevis (ISO 10) (Supplied with bolt and safety device) GKM20 JA305 GKM2 JA05 GKM132 JA GKM132 JA GKM200 JAH GKM200 JAH GKM305 JA DM9BWL DM9PWL Wiring 2 wire 3 wire PNP AS2052F0 AS3002F0 DM9BWL5 DM9PWL5 2 wire 3 wire PNP AS3002F0 DM9PWSAPC5 M3pin PNP AS3002F AS3002F Reed type AS3002F0 Part No. Wiring AS3002F0 DA93L 2 wire AS002F DA93SAPC M3pin AS002F For ATEX AS002F DA93L5 2 wire AS002F DA93SAPC5 M3pin Auto switch mounting bracket (C9 only) BMB5032 BA700 BA703 BA700 Auto switch Solid state type 2 colour indication Part No. AS2002F0 AS2052F0 DM9PWSAPC M3pin PNP For ATEX Ø5: Can also use a large flow inline type speed controller: AS200 When mounting an auto switch on a 55series (Category 2) model, the ATEX class of the cylinder with auto switch changes to Category 3, which is the same class as the auto switch. Auto switch only conforms to Category 3. (II 3GD EEx na II T5x C Ta +0 C IP7) Cable Cable 7

8 Series C95 ISO 31 ISO/VDMA [ISO 31]. Tie rod cylinder type Double Acting, Single Rod Series C95 ø10, ø200, ø250 s up to 200 mm Operating piston speed up to 500 mm/s ATEX compliant version for explosive atmospheres Auto switch tie rod mounting How to Order C95 S D B Builtin magnet Mounting B T Specifications Basic/Without bracket Centre trunnion mm 200 mm 250 mm Note) Intermediate s are available Note) Please consult with SMC for longer s Action Fluid Proof pressure operating pressure Min. operating pressure Without auto switch Ambient and fluid temperature With auto switch Lubrication Operating piston speed Cushion Note) ATEX version: to 0ºC (No freezing) Double acting Air 1.5 MPa 1.0 MPa 0.05 MPa to 70ºC Note) (No freezing) to 0ºC (No freezing) Not required (Nonlube) 50 to 500 mm/s Both ends (Air cushion) Availability: Stocked items for fast delivery & Manufacturing (Local) Stocked items for fast delivery Local Manufacturing (from 1 to days Production): Part Number () Customised C95 CP95SDB10 0, 5, 200, 250, 320, 00, 500 CP95SDB200 0, 200 Stocked items could be subject to change without prior notice For emergency orders or other delivery dates, please consult with SMC For orders up to pcs, delivery dates are a guideline ATEX compliant version (ATEX directive category 2) Classification II 2 GD c 95 C (T5) Ta C to 0 C 115 C (T) Ta 0 C to 0 C How to Order ATEX category 2 55C95SD Builtin magnet B T Mounting Basic/Without bracket Centre trunnion B mm 200 mm 250 mm Each will be made to order Note) Note) Please consult with SMC for longer s

9 C95 Accesories/Related Products Speed controllers Foot (Supplied with two pieces and screws) Flange (Supplied with screws) Single rear clevis (Supplied with screws) Double rear clevis (Supplied with bolt, safety device and screws) Male head end clevis with ball joint (Supplied with screws) Piston rod ball joint (ISO 139) Rod clevis (ISO 10) (Supplied with bolt and safety device) Floating joint Speed controller Large flow inline type Auto switch mounting bracket 10 L510 F510 C510 D510 CS10 KJ3D GKM355 JA AS5000 BS L5200 F5200 C5200 D5200 CS200 KJ3D GKM355 JA AS5000 BS L5250 F5250 C5250 D5250 CS250 KJ2D GKM0 AS00 BT20 10, wire cable DM9BWL DJ59WL 3 wire PNP cable DM9PWL DF5PWL Solid state 2colour indication autoswich M3pin PNP cable DM9PWSAPC DF5PWSAPC Reed auto switch 2 wire cable DA93L DA5L M3pin cable DA93SAPC For ATEX Note) 10, DM9BWL5 DJ59WL5 DM9PWL5 DF5PWL5 DM9PWSAPC5 DF5PWSAPC5 DA93L5 DA5L5 DA93SAPC5 Note) When mounting an auto switch on a 55series (Category 2) model, the ATEX class of the cylinder with auto switch changes to Category 3, which is the same class as the auto switch. Auto switch only conforms to Category 3. (II 3GD EEx na II T5x C Ta +0 C IP7) 9

10 Series C5 ISO 32 ISO [ISO 32]. Round Crimped Body Cylinder / Nonrotating Type Double/Single Acting, Single/Double Rod Series C5 ø, ø, ø, ø1, ø20, ø25 Rubber cushion Air cushion Nonrotating, Double acting Special rod seal gives high resistant to dusty environments s up to mm High speed actuation, up to 1500 mm/s ATEX compliant version for explosive atmospheres Auto switch band mounting How to Order and NonRotating type Double acting Double acting D N E F Note 3) Y C Bultin magnet None Builtin magnet D5W Single acting Single acting C D5 N 1 0 S B C D5 N 1 0 C J Type Nonrotating rod K (Rubber cushion only) Basic (integrated clevis) Double end bosscut style Bosscut basic style Head cover axial port Mounting E N type is only applicable for air cushion type E type is only applicable for double rod Note 3) Except single acting/spring extended type 1 Nonrotating Single Acting Spring return Spring extended Spring return Spring extended 0 JJ B B Action S T Single acting, Spring return Single acting, Spring extended Other options None XA0~30 Note) Change of Rod end shape Stainless steel piston rod and XCA piston rod nut Stainless steel piston rod, XCB piston rod nut and mounting nut Note) ø to ø1: only possible XA0/1//11 ø20 to ø25 (except Nonrotating type): XA0 to XA30 possible ø20 to ø25 (Nonrotating type): XA0/1///11/13/1/17/19/21 Other options XA0~30 3)) XB 3)5)) XB7 Note 3)5))7) XB9 Note 5))) XC Note 9) XCA Note 9) XCB None Change of Rod end shape High Temperature Low Temperature Low Speed Heavyduty Scraper Stainless steel piston rod and piston rod nut Stainless steel piston rod, piston rod nut and mounting nut ø to ø1: only possible XA0/1//11 ø20 to ø25 (except Nonrotating type): XA0 to XA30 possible ø20 to ø25 (Nonrotating type): XA0/1///11/13/1/17/19/21 Without magnets Note 3) Contact SMC for Nonrotating type Note ) In and/or air cushion type, only available for ø20 and ø25 Note 5) Only rubber cushion Note ) Only ø20, ø25 Note 7) Only single rod Note ) Not applicable for Nonrotating type Note 9) In air cushion type, only ø, and 1 possible 1 20 Double acting Note 3) Nonrotating 200, 25, 0, 50, 0, 0 0 0, 25, 0, 50, 0, 0, 5, 10, 200, 25, 0, 50, 0, 0, 5, 10, 200, 250, Single acting, 25, 0, 50, 25, 0, 50, 0, 0, 5, Not available with air cushion Other s available on request Note 3) When exceeding the standard range, it will be available as made to order (X201) Auto switch mounting B Without auto switch Band mounting Rod boot (only ø20, ø25) Without rod boot J Nylon tarpaulin (one side) K Heat resistant tarpaulin (one side) JJ Note) Nylon tarpaulin (both sides) KK Note) Heat resistant tarpaulin (both sides) Note) In case of double acting/double rod Cushion Rubber cushion () Air cushion (Only N execution, C bores to 25 mm)

11 How to Order Direct Mount Type Double acting D C Builtin magnet D None Builtin magnet 5R Type A Bottom side mounting B Note) Front side mounting Note) Only ø20, ø25 F Y Mounting Bosscut basic style Head cover axial port A F 1 0 B Other options XA0~30 XB 3) XB7 Note 3) XB9 XCA None Change of Rod end shape High Temperature Low Temperature Low Speed Stainless steel piston rod and piston rod nut ø to ø1: only possible XA0/1//11 ø20 to ø25: XA0 to XA30 possible Without magnets Note 3) Only ø20, ø25 Auto switch mounting Without auto switch B Band mounting 200, 25, 0, 50, 0, 0, 25, 0, 50, 0, , 10 20, 25, 0, 50, 0, , 10 Other s on available request For exceeding the standard range, it will be available as a special order (X201) Specifications / Nonrotating type Cushion Action Fluid Proof pressure operating pressure Double Acting Min. operating pressure Single Acting Min. operating pressure Ambient and fluid temperature Lubrication Piston speed Allowable kinetic energy Spring return Spring extended Spring return Spring extended Rubber cushion Air cushion Nonrotating accuracy Double/Single Acting, Single/Double Rod Air 1.5 MPa 1.0 MPa 0.1 MPa 0.0 MPa 0.05 MPa 0.22 MPa 0.1 MPa 0.13 MPa 0.05 MPa 0.0 MPa 0.1 MPa 0.23 MPa 20 to 0 C (Builtin magnet: to 0 C) No freezing Rubber cushion, Air cushion (Only N execution, bores to 25 mm), (Nonrotating and Single Acting: Rubber cushion only) Not required. Use turbine oil Class 1 ISO VG32, if lubricated 50 to 1500 mm/s 0.02 J 0.03 J 0.0 J 0.09 J 0.27J 0. J 0.17 J 0.19 J 0. J 0. J 0.93 J ±1º30 ±1º30 ±1º ±1º ±0º2 ±0º2 Direct mount type Action Double Acting, Single Rod Fluid Air Proof pressure 1.5 MPa operating 1.0 MPa pressure Min operating pressure 0.1 MPa 0.0 MPa 0.05 MPa Ambient and fluid temperature Cushion Lubrication Piston speed Allowable kinetic energy 20 to 0 C (Builtin magnet: to 0 C) Rubber bumper () Not required. If necessary, turbine oil no. 1 ISO VG32 is recommended 50 to 1500 mm/s 0.02 J 0.03 J 0.0 J 0.09 J 0.27J 0. J 11

12 Series C5 ISO 32 Availability: Stocked items for fast delivery & Manufacturing (European and Local) Stocked items for fast delivery European Manufacturing () 3 days Production: Intermediate s Part Number (Without auto switch) C5N C5N C5N C5NC C5N C5N C5NC C5N C5N1 C5N1C C5N1 C5N20 C5N20C C5N20 C5N25 C5N25C C5N25 ATEX compliant version (ATEX directive category 2) Classification How to Order Double acting II 2 GD c ATEX category 2 Built in magnet None D Builtin magnet Type K 90 C (T5) Ta C to 0 C 1 C (T) Ta 0 C to 0 C 55C D 5 K N 20 0 C B 55C D 5W E 20 0 B Double acting Non rotating rod (Rubber cushion only) Part Number (With auto switch) CD5NB CD5N B CD5NB CD5NCB CD5N B CD5NB CD5NCB CD5N B CD5N1B CD5N1CB CD5N1 B CD5N20B CD5N20CB CD5N20 B CD5N25B CD5N25CB CD5N25 B CD5WE1B CD5WE20B CD5WE25B Stocked items could be subject to change without prior notice : Action S: Single action, spring return T: Single action, spring extend , 25, 0, 50, 0, 0, 25, 0, 50, 0, 0, 5, 10, 200, 25, 0, 50, 0, 0, 5, 10, 200, 250, 300, 25, 0, 50, 0, 0, 25, 50, 25, 0, 50, 0, 0, 25, 0, 50, 0, 25, 50, 25, 0, 50, 0, 0, 5, 10, 200, 25, 0, 50, 0, 0, 5, 10, 200, 25, 50, 25, 0, 50, 0, 0, 5, 10, 200, 25, 0, 50, 0, 0, 5, 10, 200, 25, 50, 25, 0, 50, 0, 0, 5, 10, 200, 250, 300, 25, 0, 50, 0, 0, 5, 10, 200, 250, 300, 25, 50, 0, 25, 0, 50, 0, 0, 5, 10, 200, 250, 300, 25, 0, 50, 0, 0, 5, 10, 200, 250, 300, 25, 50, 25, 0, 50, 0, 0, 5, 10, 200, 25, 0, 50, 0, 0, 5, 10, 200, 250, 300, 25, 0, 50, 0, 0, 5, 10, 200, 250, 300 Symbol N E F Mounting Mounting Basic integrated clevis Double end type Front nose type Front nose in line port Y N type is only applicable for air cushion type E type is only applicable for double rod Note 3) Nonrotating Not available with air cushion Other s available on request Note 3) For exceeding the standard range, it will be available as made to order (X201) Specifications Action Fluid Proof pressure operating pressure Min. operating pressure Ambient and fluid temperature Cushion Lubrication Piston speed Nonrotating accuracy 5 days Production: Longer than standard s X201 Non Rotating cylinder cylinder ATEX compliant version Change of rod end shape XA0~30 Heat resistant cylinder ( ~ 150ºC) XB Cold resistant cylinder (0 ~ 70ºC) XB7 Low speed cylinder XB9 Stainless steel piston rod and piston rod nut XCA Stainless steel piston rod, piston rod nut and mounting nut XCB Local Manufacturing (from 1 to days Production): Customised C5 For emergency orders or other delivery dates, please consult with SMC For orders up to pcs, delivery dates are a guideline Other options Stainless steel piston rod and XCA piston rod nut Stainless steel piston rod, piston XCB rod nut and mounting nut Auto switch mounting Without auto switch B Band mounting Cushion Rubber bumper () Air cushion (only "N" execution, C bores to 25 mm) Double acting Air 1.5 MPa 1.0 MPa 0.1 MPa 0.0 MPa 0.05 MPa to 0 C (no freezing) Rubber bumper, Air cushion (Except for ø) Not required (Non lube) 50 to 750 mm/s Rubber bumper, 50 to mm/s Air cushion ±1 30' ±1 30' ±1 ±1 ±0 2' ±0 2'

13 C5 Accesories/Related Products Speed controllers C5R series C5 series Mounting bracket Auto switch Mounting band,, Front/Rear Flange Rod clevis Clevis Foot Foot Front/Rear Piston rod Floating (ISO10) (1pc) (2 pcs Note) ) Trunnion (Supplied ball joint joint with bolt (ISO139) and safety device) C5F C5F1 C5F25 C5C C5C1 C5C25 C5LA C5L1A C5LA25 C5LB C5L1B C5L25B C5T C5T1 C5T25 GKM GKM GKM1 GKM20 Note) 2 pcs with mounting nut 1 pc ø Speed controller Auto switch tube inline type Solid state type 2 colour indication Part No. Cable AS02F23 AS02F0 AS02F0 AS02F23 AS2002F0 AS2052F0 AS2052F0 AS2002F0 AS2052F0 AS2052F0 DM9BWL DM9PWL Wiring 2 wire 3 wire PNP DM9PWSAPC M3pin PNP For ATEX DM9BWL5 2 wire DM9PWL5 3 wire PNP DM9PWSAPC5 M3pin PNP DA93L5 DA93SAPC5 Reed type Part No. Wiring Cable DA93L DA93SAPC For ATEX 2 wire M3pin 2 wire M3pin Mounting bracket BJ31 KJD KJD KJD KJD JA070 JA150 JA205 JA305 Mounting Band BJ200 BJ20 BJ20 BJ201 BM2020 BM2025,, 1 20, 25 ø tube Speed controller elbow type AS01FM523A AS01FM50A AS01FM50A AS2201F0123A AS2201F010SA AS2201F010SA AS2201F010SA AS2201F01SA Speed controller universal type AS1301FM523 AS1301FM50 AS1301FM50 AS2301F0123 AS2301F010S AS2301F010S AS2301F010S DA93 type cannot be mounted on bore s ø, ø and ø When mounting an auto switch on a 55series (Category 2) model, the ATEX class of the cylinder with auto switch changes to Category 3, which is the same class as the auto switch. Auto switch only conforms to Category 3. (II 3GD EEx na II T5x C Ta +0 C IP7) Dual speed controller ASD230FM50 ASD230FM50 ASD330F010S ASD330F010S 13

14 Series C55 ISO 27 ISO [ISO 27]. Compact Cylinder type Double Acting, Single Rod Series C55 ø20, ø25, ø32, ø0, ø50, ø3, ø0, ø0 s up to 150 mm Operating piston speed up to 500 mm/s ATEX compliant version for explosive atmospheres Possible to mount directly round DM9 auto switches on the surfaces Tapped body with through holes for easy mounting Female and male rod threads available How to Order C D55 B 20 D B Builtin magnet None Builtin magnet Mounting style Throughhole/Both ends tapped common () Other options None X139 Note) Auto Switch Tslot mounting Note) Only available from ø20 to ø mm mm mm 0 0 mm mm 3 m 0 0 mm 0 0 mm Rod end thread M Rod end female thread Rod end male thread 20 to 3 5,, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5, 150 0, 0, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5 Note) Intermediate s by using an exclusive body are available. Order example: C55B327 Specifications Type Action Fluid Proof pressure Maximum operating pressure Minimum operating pressure Ambient and fluid temperature Cushion Piston speed Without auto switch With auto switch ø20 to ø3 ø0, ø0 Note) ATEX version: to 0ºC (No freezing) Pneumatic (Nonlube) Air 1.5 MPa 1.0 MPa 0.05 MPa (ø20 to ø3) 0.03 MPa (ø0, ø0) to 70ºC Note) (No freezing) to 0ºC (No freezing) Rubber bumper on both end 50 to 500 mm/s 50 to 300 mm/s 1

15 Availability: Stocked items for fast delivery & Manufacturing (European and Local) Stocked items for fast delivery Part Number () C 55B20 5,, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5, 150 C 55B20M 5,, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5, 150 C 55B25 5,, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5, 150 C 55B25M 5,, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5, 150 C 55B32 5,, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5, 150 C 55B32M 5,, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5, 150 C 55B0 5,, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5, 150 C 55B0M 5,, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5, 150 C 55B50 5,, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5, 150 C 55B50M 5,, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5, 150 C 55B3 5,, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5, 150 C 55B3M 5,, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5, 150 C 55B0, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5 C 55B0M, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5 C 55B0, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5 C 55B0M, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5 Stocked items could be subject to change without prior notice Auto switch : without D: with European Manufacturing 5 days Production: ATEX compliant version Auto switch Tslot mounting X139 Local Manufacturing (from 1 to days Production): Customised C55 For emergency orders or other delivery dates, please consult with SMC For orders up to pcs, delivery dates are a guideline ATEX compliant version (ATEX directive category 2) Classification II 2 GD c 5 C (T5) Ta C to 0 C 5 C (T) Ta 0 C to 0 C How to Order 55 C D55B 20 ATEX directive category 2 D Built in magnet None Builtin magnet Rod end thread M Rod end female thread Rod end male thread B Mounting style Throughhole/Both ends tapped common () mm 25 mm 32 mm 0 mm 50 mm m 0 mm 0 mm 20 to 3 5,, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5, 150 0, 0, 15, 20, 25, 30, 35, 0, 5, 50, 0, 0, 0, 5 Note) Intermediate s by using an exclusive body are available. Order example: C55B327 15

16 C55 Accesories/Related Products Speed controllers Foot (Supplied with 2 pieces and screws) C55L020 C55L025 C55L032 C55L00 C55L050 C55L03 C55L00 C55L0 Flange (Supplied with screws) C55F020 C55F025 C55F032 C55F00 C55F050 C55F03 C55F00 C55F0 Single clevis (Supplied with screws) C55C020 C55C025 C55C032 C55C00 C55C050 C55C03 C55C00 C55C0 Piston rod ball joint (ISO139) KJD KJD KJD KJD KJD KJD KJ1D KJ1D Rod clevis (ISO10) (Supplied with bolt and safety device) GKM1 GKM1 GKM20 GKM20 GKM2 GKM2 GKM132 GKM132 Floating joint for male thread JA205 JA205 JA305 JA305 JA05 JA05 JA JA Floating joint for female thread JB250 JB250 JB05 JB05 JB3150 JB , 25 32, 0 50, 3 0, 0 Speed controller elbow type ø tube 3.2 AS01FM523A AS01FM50A AS01FM50A 3.2 AS2201F0123A AS2201F010SA AS2201F010SA AS2201F010SA AS2201F01SA Speed controller universal type ø tube 3.2 AS1301FM523 AS1301FM50 AS1301FM AS2301F0123 AS2301F010S AS2301F010S AS2301F010S ø tube Dual speed controller ASD230FM50 ASD230FM50 ASD330F010S ASD330F010S Speed controller inline type ø tube 3.2 AS02F23 AS2002F0 20 AS2052F0 AS2052F0 AS2002F0 25, 32 AS2052F0 AS2052F0 AS3002F0 0, 50 AS3002F0 AS3002F AS3002F AS3002F0 AS3002F0 3 AS002F AS002F AS002F 0, 0 AS002F Auto switch Solid state type 2 colour indication Part No. DM9BWL DM9PWL Wiring 2 wire 3 wire PNP DM9PWSAPC M3pin PNP For ATEX Note) DM9BWL5 2 wire DM9PWL5 3 wire PNP DM9PWSAPC5 M3pin PNP Part No. DA93L DA93SAPC For ATEX Note) DA93L5 DA93SAPC5 Reed type Wiring 2 wire M3pin 2 wire M3pin Cable Cable Note) When mounting an auto switch on a 55series (Category 2) model, the ATEX class of the cylinder with auto switch changes to Category 3, which is the same class as the auto switch. Auto switch only conforms to Category 3. (II 3GD EEx na II T5x C Ta +0 C IP7) 1

17 More Related Products More Related Products Series KQ2 Fittings Easy and quick assembly with less labour costs and high flexibility Series TU Tubing Good flexibility and available in 29 different colours Series RB Shock Absorbers Wide range and automatic adjustment to the most appropriate absorption performance Series GUM/GUL Guide Units External guides for cylinders with bores from to 0 Series VBA Booster Regulator Increase factory air pressure by up to times Series AV Soft Startup Valve Gradually increases supply pressure during start up and rapidly exhausts air when the supply air is shut off Series SY 5 Port Solenoid Valves Unique allpurpose solenoid valve 5 bore cylinders Outsanding flow while compact Plugin metal base type available Series VFS 5 Port Solenoid Valves For big bore cylinders 300 bore cylinders Series SY/SYJ 3 Port Solenoid Valves Suitable to operate single acting cylinders High flow with low power consumption Series AR Regulator Port s from M5 to 1 and set pressure range from 0.05 to 0.5MPa Series IR Precision Regulator For instrumentation applications with a selectable pressure range from to 0. MPa Series ITV ElectroPneumatic Regulator Stepless control of air pressure proportional to an electrical signal with set pressure range from to 0.9 MPa Small auto switch mountable on all types Perfect for use with our easy to set 2colour indication solid state auto switch, series DM9W A green light illuminates up at the optimum operating range. CP9 Direct mounting C9, C95 TieRod mounting Operating range ON Red Green Red OFF Optimum operating range C5 Band mounting C55 Direct mounting 17

18 Other noniso cylinders Other noniso cylinders that may suit your needs Series CG1 Round cylinder The Most Flexible Round Cylinder When you need a round cylinder with many options Shorter and cleaner than equivalent tierod cylinder Female and male rod end thread Grease for food processing equipment PTFE grease Nonrotating Rod Direct mount Direct mount / Nonrotating Rod Low friction With end lock With onetouch fittings Airhydro type Clean series Copper free Water resistant s: ø20, ø25, ø32, ø0, ø50, ø3, ø0, ø0 s: from 25 to 300 mm (Maximum up to 1500 mm) Series CG3 Round cylinder. Short type The Most Compact Round Cylinder If space, weight or cleanliness is a challenge Space saving Light weight Clean profile Female and male rod end thread s: ø20, ø25, ø32, ø0, ø50, ø3, ø0, ø0 s: from 25 to 300 mm Series CG5 Stainless Steel Round cylinder The Cleanest Round Cylinder For use in environments with water splashing such as food processing machines Special scraper as standard prevents water from entering the cylinder All external parts (including mounts) are made from Stainless Steel (SUS30) Two types of seal material NBR or FKM can be selected Extended service life as it can be disassembled for replacement of seals s: ø20, ø25, ø32, ø0, ø50, ø3, ø0, ø0 s: from 25 to 300 mm (Maximum up to 1500 mm) 1

19 Series CQ2 Compact cylinder The Most Flexible Compact Cylinder If you need the special to be standard Female and male rod end thread Nonrotating Rod Axial Piping Antilateral Load With end lock Water Resistant Smooth Cylinder Lowspeed Heat resistant cylinder ( ~150 C) Cold resistant cylinder ( 0~70 C) With heavy duty scraper Piston rod, rod end nut made of SUS With coil scraper Fluoro rubber for seals Dual cylinder / type Dual cylinder / type Change of rod end shape With boss in rod side With concave boss on head end Special port location With onetouch fittings Airhydro type Clean series Copper and fluorinefree series s: ø, ø1, ø20, ø25, ø32, ø0, ø50, ø3, ø0, ø0, ø5, ø10, ø10, ø, ø200 s: from 5 to 300 mm Series CQU Compact cylinder. Plate type The Thinnest Compact Cylinder When you have tried everything and nothing else fit in that small space Light and compact Allows smaller mounting pitch Female and male rod end thread s: ø20, ø25, ø32, ø0 s: from 5 to 0 mm Series MGP Compact Guide Cylinder The Most Flexible and Compact Guide Cylinder If you need the robustness of a guide cylinder Slide bearing type Fluoro rubber for seals Ball bushing type With air cushion High precision ball bushing type With end lock Wide type (for transferring large work Heavy duty guide rod pieces) With lock Copper and fluorinefree series Clean series Change of guide rod end shape Water Resistant Lowspeed With shock absorber Machining tapped hole, drilled hole and pin With heavy duty scraper hole additionally With parts made of SUS Bottom mounting style Extension/retraction adjustable type Symmetrical port position With coil scraper Lateral piping type Dust proof type Heat resistant cylinder ( ~150 C) With felt s: ø, ø1, ø20, ø25, ø32, ø0, ø50, ø3, ø0, ø0 s: from to 00 mm 19

20 For more information about the ISO cylinders Digital catalogue: Select the product you need Validate the part number Get the required information PDF documentation 3D CAD Technical information Stock information Cylinder Configurator: Download the Cylinder Configurator Install it or execute it Select the cylinder series Configure the cylinder and accesories Contact SMC ISOCYL01AUK SMC CORPORATION (Europe) Austria +3 (0) Belgium +32 (0) Bulgaria +359 (0) Croatia +35 (0) Czech Republic Denmark Estonia Finland France +33 (0)17 Germany +9 (0) Greece sales@smchellas.gr Hungary office@smc.hu Ireland +353 (0) sales@smcpneumatics.ie Italy mailbox@smcitalia.it Latvia info@smclv.lv Lithuania info@smclt.lt Netherlands +31 (0) info@smcpneumatics.nl Norway post@smcnorge.no Poland + (0) office@smc.pl Portugal postpt@smc.smces.es Romania smcromania@smcromania.ro Russia info@smcpneumatik.ru Slovakia +21 (0) office@smc.sk Slovenia +3 (0)735 office@smc.si Spain post@smc.smces.es Sweden + (0) post@smc.nu Switzerland +1 (0) info@smc.ch Turkey info@smcpnomatik.com.tr UK + (0) sales@smcpneumatics.co.uk SMC CORPORATION Akihabara UDX 15F, 11, Sotokanda, Chiyodaku, Tokyo 10021, JAPAN Phone: FAX: st printing RT printing RT 7 Printed in Spain Specifications are subject to change without prior notice and any obligation on the part of the manufacturer.