EME SYSTEM V7.0 By Jean-Jacques F1EHN 08/2008

Size: px
Start display at page:

Download "EME SYSTEM V7.0 By Jean-Jacques F1EHN 08/2008"

Transcription

1 EME SYSTEM V7.0 By Jean-Jacques F1EHN 08/2008 This document is a quick manual of EME System. It briefly explains and shows the main features of EME System and what it is possible to do with it. For more information, please, read the EME_Doc_V7.pdf documentation. Contents : 1. What is there into an EME System? Supported interfaces and protocols How does EME System work? Launcher EME Setup Tracking Planner EME Calculator DXCC Edit EME System diagram What is there into an EME System? EME System is divided into: A front-end module (launcher) to manage EME System and launch directly the other modules An initialization module (emesetup) to set the parameters (call sign, location, serial port, end-stops, station parameters, frequency, angular correction...) called by the control software. A control module (tracking) capable of handling an EME station in real time (Automatic tracking of sources, traffic periods, Doppler, polarization and Rx/Tx management, signal level and antenna diagram measurements, common window, sky temperature..). A module (planner) to plan the EME activity (Moon location, Common window, Doppler, sky temperature...). A module to edit the prefix and countries DXCC database (dxccedit). A module to help the operator about EME calculation to evaluate the average performance of the EME station (emecalc). A hardware interface between the control software and the EME station (Motors, angles monitoring, receiver...). This interface is optional. 1

2 2. Supported interfaces and protocols This chapter gives a non-exhaustive list of the supported interfaces and protocols by the real time tracking module. The next chapter (chapter 3) explains each running with more details. Supported interfaces and protocols Remarks and comments Green Heron (RT21) Using GH tracker (see chapter 3.2) ARS EA4TX DDE dialog (see chapter 3.2) Yeasu G5500 Using GS232 protocol (see chapter 3.3) Alfa Spid rotator, F1TE, G6LVB Using GS232 protocol (see chapter 3.3) F1TE, G6LVB (or any GS232 compatible interfaces) DL7AOT (or any EasyComm1 compatible interfaces) EGIS rotator system (via EPR103/203) (see chapter 3.5) Pro. Sis. Tel rotator system (via CBox D) (see chapter 3.6) F1EHN interface (see chapter 3.7) MK-EHN interface (see chapter 3.7) W2DRZ or F1EHN compatible interfaces (see chapter 3.7) Adaptors USB/RS232 are supported.. 3. How does EME System work? Using GS232 protocol (see chapter 3.3) Using EasyComm1 protocol (see chapter 3.4) The following chapters show the use of the different modules of EME System. This chapter is dedicated to the main uses and utilities of the tracking module. Tracking starts with loading the *.dat file done with EME Setup and selected by the operator Manual running Tracking is able to run without any antenna interface. It displays all the real time parameters which are necessary for the EME traffic (moon position, Doppler shift, Common window, radio sources position or any astronomic object with entering its Ra and Decl coordinates). To use this running, set the Interface dialog to Without in EME Setup. 2

3 3.2. Automatic tracking with DDE dialog Tracking is able to dialog with external applications via a dedicated DDE channel. The document DDE_Dialog.pdf describes how to develop your own DDE application. To use this mode, set the Interface dialog to DDE Server in EME Setup. Moreover, the known interface ARSWin from EA4TX is compatible with tracking. Set the Interface dialog to ARS EA4TX in EME Setup. With checking the Send data check box, you allow tracking to send data to the external application via a DDE channel. The accuracy is limited to 0.1 with the ARSWin program and 0.01 with the DDE server. ARS Win from EA4TX (http://www.ea4tx.com/) The Green Heron engineers have developed a small middleware piece called GH Tracker. It converts the tracking data to DCU-1 protocol compatible with their Rotators as RT21 system (more information at ) 3

4 3.3. Automatic tracking with GS232 protocol and Elevation data. Tracking is compatible with external devices using a GS232 protocol. The GS232 protocol is supplied with the devices documentation like Yaesu Gs232-G5500. Tracking sends only the Azimuth Checking the Send data check box allows tracking to send data to the external devices compatible with the GS232 protocol via a RS232 serial port. The data flow can be set from 600 to baud. The data interval can be set from 1 to 30 s. (10s by default). The accuracy is limited to 1. This mode is compatible with ALFASPID rotator (Rot2Prog interface => RAS or RAK rotator with more information at the F1TE interface (http://www.f1te.org/tracker/trackeur_gb.htm), the G6LVB tracker (http://www.g6lvb.com/articles/lvbtracker/ ) and all the rotator systems using the GS232 protocol Automatic tracking with EasyComm1 protocol Tracking is compatible with external devices using an EasyComm1 protocol. Checking the Send data check box allows tracking to send data to the external devices compatible with the EasyComm1 protocol via a RS232 serial port. The data flow can be set from 600 to baud. The data interval can be set from 1 to 30 s. (10s by default) The accuracy is limited to 0.1. This mode is compatible with the known DL7AOT interface and all the rotator systems using the EasyComm1 protocol. 4

5 3.5. Automatic tracking with EGIS rotator system Tracking is compatible with the EGIS rotator system using the EPR-103/203 interface box. Checking the Send data check box allows tracking to send data to the external devices via a RS232 serial port. The data flow can be set from 600 to baud (1200 baud is recommended). The data interval can be set from 1 to 30 s. (5s by default) The accuracy is limited to More information on the EGIS Bi-Axial-Rotor at Automatic tracking with PROSISTEL rotator system Tracking is compatible with the Pro. Sis. Tel. rotator system using the Control BOX D interface. Checking the Send data check box allows tracking to send data to the external devices. The data flow can be set from 600 to baud (9600 baud is recommended). The data interval can be set from 1 to 30 s. (10s by default). The accuracy is limited to 1. More information on the Pro. Sis. Tel system at (http://www.prosistel.net/home-e/default.html). 5

6 3.7. Automatic tracking with F1EHN or MK-EHN interface Tracking dialogs with the MK-EHN (or F1EHN) interface through a RS232 serial com port. It is also compatible with USB/RS232 adaptors. This interface allows very accurate tracking (0.01 ) and a complete antenna management (motor drive with or without speed control). Read the rotation_modes.pdf documentation. For more information about the interface, read the documentation or the PCB_Wiring document including schematics, components list The accuracy is determined by the Azim / Elev measurement encoders. Tracking is compatible up to 16 bits resolution. The performance is also coming from the time of latency of the interface. The MK/EHN interface is optimized to reduce this latency to the minimum value (the information is renewed each 60 ms). Be careful if you are looking for a very accurate system. For an antenna rotation speed of 1 /sec the accuracy is then limited to 1 * 0.06 => an angular error of Some EMErs have developed their own interface compatible with this mode like the known W2DRZ interface (http://www.w2drz.ramcoinc.com/overview.htm). 6

7 4. Launcher It concentrates the launch of the different modules. It allows creating shortcuts and so launching directly your favourite program with your favorite setup file. To edit and update a setup file (*.dat), select an existing file then press the Planner button or press the New button. 5. EME Setup Use it during the first use of EME System or to adjust your EME station parameters. All the parameters are stored in a "*.dat" file. The 6 tabs allow to set : Coordinates of the station (Call sign, latitude, longitude ) Interface: to define the dialogue between your interface and your computer Azimuth: to set the parameters of the antenna azimuth axis (encoder, end stop ) Elevation: to set the parameters of the antenna elevation axis (encoder, end stop ) EME station to enter all the characteristics of the station (power, NF, antenna gain, cables losses ) Correct : to create or modify a correction file of your antenna angular measurement. With this file, the Tracking module is able to compensate the drift of your mechanical antenna system by adding the correction values to the angular measurement. This feature is available for the other protocols (different as F1EHN). Then Tracking adds the correction values to the angular position of the tracked source. 7

8 6. Tracking Tracking starts with loading the setup file. It displays 3 fixed frames for : The position of the selected source. The UTC coordinates The traffic information with the traffic period, the frequency and the Doppler shift. Tracking has 6 selectable tabs to display: World map tab : it is dedicated to the EME traffic (common window, polar, DXCC data..) Sky Map tab : it is dedicated to the astronomical information and displays a Brightness sky map (isothermic curves) and a few astronomic information (phase, GHa, Decl, Range of the moon Traffic tab : it is dedicated to give a help around the EME traffic with the ability to manage a transceiver and a list of schedules Terrestrial tab : it brings a useful help for the operator using their EME antenna for the terrestrial traffic. It also displays a local map and antenna position. Sources tab : it offers a complete choice of sources ( Sun or Moon, Radio sources, Cold sky area, Deep Space Network object with a complete compatibility with the Horizons tools (from JPL), fixed point or User define sources) 8

9 Setup tab : it displays the general parameters (coordinates, traffic, frequency, interface dialog ) and the tracking parameters (angular configuration, level or polar measurement ). Meas. window : it allows to do an antenna diagram measurement. It displays the antenna aperture on both Az/El axis and results (-3 db aperture, Beam offset, Cursors measurement). By using a RF detector or similar connected to the analog input, tracking is able to do an automatic antenna diagram measurement. Moreover, Tracking displays a dedicated Interface window for the F1EHN interface and a RIG manager window. Select the DX station into Tracking which automatically links the DX info to Google Earth. If a geo-localized photo is present in the EME antenna photos database**, then view the antenna of your DX station by clicking the icone available into Google Earth. ** a collection of photos of the EME antennas is available on the download page of the F1EHN web site. These photos are geo-localized and visible into Google Earth. More information on the F1EHN web site. 9

10 7. Planner The Planner module helps you to plan the EME activity, to prepare your skeds or traffic periods with calculating and displaying the Moon location, DX Common window, Doppler shift, polarization offset, sky temperature, phase of the moon... Planner is able to simulate and calculate the EME data for a month, the EME forecast for a wished date and a common window forecast to prepare your skeds. The Month EME data window displays up to 4 curves for the : Declination of the Moon Extra path loss Sky temperature degradation System temp. degradation. Planner calculates all the steps and displays a new EME forecast window for each day, including date, time, sky noise temperature for the moon position, the extra loss (Loss/Perigee), the moon declination, the moon position and Doppler frequency shift, the sun location and a radio source location. Planner displays the Common window window including 3 different tabs : Sources : to select the wished common source (Planner supports the same sources data as Tracking) Sky Map : to display Astronomical and Sky information World Map : it is dedicated to the EME traffic (common window, polar, DXCC data..) By selecting a DXCC, Planner is able to display a complete forecast for the common window between the station and DXCC. 10

11 8. EME Calculator The EME calculator module helps you to evaluate or to gauge the performance of your EME station. Use EMECalc to do an EME budget or to calculate the average performance of your station with noise measurement. 9. DXCC Edit The DXCC editor module helps you to edit the DXCC database, to modify or update the information, to create a new DXCC or delete obsolete information. 11

12 10. EME System diagram PC LAUNCHER To launch the different modules of the system. INTERFACE ICP Voltage regulator +12V EME SETUP To set the parameters CORRECT To correct the antenna angular positions TCV file Data file +5V 16-bit Az/El Option Clock Data Rec Rx Bus 2* ADC + sensors Optical encoders TRACKING Real time tracking RIG RS232 RS232 PIC RS 485 Az/El Option Analog input Led A2 Optical encoders Signal level Polar meas. PLANNER To forecast the EME activity Speed Control Option Azim Elev analog outputs EME Calc EME and Noise calculator DXCC Editor Antenna Control Up Down CW CCW DXCC data base editor 12

EME SYSTEM V7. EME System V7 by F1EHN by J-Jacques F1EHN 08/2008

EME SYSTEM V7. EME System V7 by F1EHN by J-Jacques F1EHN 08/2008 EME SYSTEM V7 EME System V7 by F1EHN 1993-2008 by J-Jacques F1EHN 08/2008 EME SYSTEM V7...1 1 INTRODUCTION...3 2 WHAT IS NEW IN THE 7.0 VERSION...4 3 Considerations on an automatic tracking system...5

More information

Rotator RAK Controller Rot1Prog

Rotator RAK Controller Rot1Prog 2014-05-05 Rotator RAK Controller Rot1Prog Instruction Manual Page 3 www.spid.alpha.pl Spid Rotator Table of Contents Introduction...3 Shipping Contents...3 Technical Data...3 Control Panel...4 Rear Panel...5

More information

AlfaSpid Rotator RAS Controller Rot2Prog For use with AlfaSpid AZ/EL RAS. AlfaSpid EL REAL. User Manual DRAFT

AlfaSpid Rotator RAS Controller Rot2Prog For use with AlfaSpid AZ/EL RAS. AlfaSpid EL REAL. User Manual DRAFT AlfaSpid Rotator RAS Controller Rot2Prog For use with AlfaSpid AZ/EL RAS OR AlfaSpid EL REAL User Manual DRAFT AlfaSpid Rotator www.alfaradio.ca Page 2 Table of contents Introduction... 3 Shipping Contents...

More information

ZT-USB Series User Manual

ZT-USB Series User Manual ZT-USB Series User Manual Warranty Warning Copyright All products manufactured by ICP DAS are under warranty regarding defective materials for a period of one year, beginning from the date of delivery

More information

Firmware Reprogramming Guide

Firmware Reprogramming Guide 20 Sept. 2011 1 UART Connection Hardware Setup Modules and adaptors may be reprogrammed using the procedure detailed in this document. Normally, our platforms will be delivered with the final firmware

More information

Tech Info Document: PIC16F84A LCD Satellite Antenna Tracking Interface

Tech Info Document: PIC16F84A LCD Satellite Antenna Tracking Interface Fox Delta Amateur Radio Projects & Kits FD- ST3 Tech Info Document: PIC16F84A LCD Satellite Antenna Tracking Interface Preview: When ST1 was made available in kits, hundreds of Radio Amateurs took interest.

More information

SMS Alarm Messenger. Setup Software Guide. SMSPro_Setup. Revision 090210 [Version 2.2]

SMS Alarm Messenger. Setup Software Guide. SMSPro_Setup. Revision 090210 [Version 2.2] SMS Alarm Messenger SMSPro_Setup Revision 090210 [Version 2.2] ~ 1 ~ Contents 1. How to setup SMS Alarm Messenger?... 3 2. Install the SMSPro_Setup software... 5 3. Connection Type... 6 4. Connection Port

More information

1 What s in the shipping package?

1 What s in the shipping package? ZT-USB Series Quick Start 1 What s in the shipping package? The package includes the following items: ZT-USB Series Quick Start CD If any of these items are missing or damaged, please contact the local

More information

AlfaSpid MD-01 Controller

AlfaSpid MD-01 Controller AlfaSpid MD-01 Controller 11211-154 St. Edmonton, Alberta, Canada T5M 1X8 sales@alfaradio.ca 780 466 5779 www.alfaradio.ca Revised 15March2013 http://www.alfaradio.ca This manual is for use with units

More information

GPS-G1 GPS- G1(T) User Manual

GPS-G1 GPS- G1(T) User Manual GPS-G1 GPS- G1(T) User Manual MoTeC GPS- G1 User Manual Contents Using the GPS... 1 Description... 1 Mounting... 1 Electrical Connections... 2 GPS Configuration... 2 Data Logger Configuration... 3 GPS

More information

Schematic & Parts List: PIC16F688 Satellite Tracker & Rotor Controller

Schematic & Parts List: PIC16F688 Satellite Tracker & Rotor Controller Fox Delta Amateur Radio Projects & Kits FD- ST1 Schematic & Parts List: PIC16F688 Satellite Tracker & Rotor Controller Introduction to Satellite Antenna Tracking: In view to encourage radio amateurs and

More information

Antenna Rotator System

Antenna Rotator System Antenna Rotator System RCI-USB Reference Manual September/2011 Rev 1.3c Introduction Thank you for purchasing the ARS RCI-USB Interface. Presently, the ARS System provides the most powerful highest performance

More information

SPID Elektronik. Driver MD-01 MD-01

SPID Elektronik. Driver MD-01 MD-01 SPID Elektronik Driver MD-01 MD-01 Table of contents Table of contents... 2 Introduction... 4 Block diagram... 4 Parameters of the driver... 4 Photos and description... 5 Front... 5 Back... 5 Operation...

More information

I-7561 Pin Assignment and Specifications. Introduction

I-7561 Pin Assignment and Specifications. Introduction I-7561 Pin Assignment and Specifications Introduction The I-7561 is a cost-effective module for transfer serial data over USB. It allows you to connect your serial devices to systems using a USB interface.

More information

SPID Elektronik. Driver MD-01 MD-01

SPID Elektronik. Driver MD-01 MD-01 SPID Elektronik Driver MD-01 MD-01 Table of contents Table of contents... 2 Introduction... 4 Block diagram... 4 Parameters of the driver... 4 Photos and description... 5 Front... 5 Back... 5 Operation...

More information

Schematic & Parts List: PIC16F688 Satellite Tracker & Rotor Controller

Schematic & Parts List: PIC16F688 Satellite Tracker & Rotor Controller Fox Delta Amateur Radio Projects & Kits FD- ST1 Schematic & Parts List: PIC16F688 Satellite Tracker & Rotor Controller Introduction to Satellite Antenna Tracking: The ST1 kit/project was designed as an

More information

BTS-1000A Bluetooth to RS-232 Converter

BTS-1000A Bluetooth to RS-232 Converter BTS-1000A Bluetooth to RS-232 Converter Operation Manual Version 1.0 Table of Contents 1. Introduction.. 2 2. Package checklist.. 3 3. Product Specification... 4 4. Product Panel View Description. 5 BTS-1000A

More information

There are many ham radio related activities

There are many ham radio related activities Build a Homebrew Radio Telescope Explore the basics of radio astronomy with this easy to construct telescope. Mark Spencer, WA8SME There are many ham radio related activities that provide a rich opportunity

More information

User Guide. Model Temperature and Humidity Datalogger Kit Model SW276 Datalogging Software

User Guide. Model Temperature and Humidity Datalogger Kit Model SW276 Datalogging Software User Guide Model 42275 Temperature and Humidity Datalogger Kit Model SW276 Datalogging Software Introduction Congratulations on your purchase of Extech Instrument s Datalogging instrumentation and software.

More information

Setup guide for EZ50 and EZ500 serial RS232 RF Radios. Establishing a link in a test setup

Setup guide for EZ50 and EZ500 serial RS232 RF Radios. Establishing a link in a test setup Setup guide for EZ50 and EZ500 serial RS232 RF Radios Establishing a link Verifying communication Configuring the parameters Establishing a link in a test setup Before connecting the serial radios to your

More information

PstRotator ~ Antenna Rotator Software Application for Radio Astronomy

PstRotator ~ Antenna Rotator Software Application for Radio Astronomy PstRotator ~ Antenna Rotator Software Application for Radio Astronomy Whitham D. Reeve 1. Introduction This article describes the PstRotator application software {PstR}. PstRotator is a Windows program

More information

Zigbee RS-232/DI/DO/AI Adapter

Zigbee RS-232/DI/DO/AI Adapter Zigbee RS-232/DI/DO/AI Adapter 1.Product description 1.1 Profiles RS-232 DB9 Connector Blue LED: Digital Firmware Switching by DIP Switch C: Coordinator R: Router D: Device Blue LED: Analog DIP Switch

More information

RST INSTRUMENTS LTD.

RST INSTRUMENTS LTD. RST INSTRUMENTS LTD. Digital Bus Tilt Meter Host Software Instruction Manual PC Platform Ltd. 11545 Kingston St., Maple Ridge, B.C. Canada V2X 0Z5 Tel: 604-540-1100 Fax: 604-540-1005 e-mail: info@rstinstruments.com

More information

2 Channels Watt & SWR Meter

2 Channels Watt & SWR Meter 2 Channels Watt & SWR Meter 1. 2ChWattMeter: The Architecture... 2 2.1 LCD Unit... 4 2.2 SWR Bridge... 6 2.3 WINDOW BASED PROGRAM... 8 2. LCD UNIT... 10 3.1 Operative Modes... 10 3.2 Wattmeter Mode: Automatic

More information

GPS-BL1 User s Manual

GPS-BL1 User s Manual GPS-BL1 User s Manual Contents Using the GPS... 1 Description... 1 GPS Mounting... 1 Antenna Mounting... 1 Antenna Connection... 2 GPS Unit Electrical Connections... 2 GPS Configuration... 2 Logging Device

More information

Zigbee RS-232/DI/DO/AI Adapter

Zigbee RS-232/DI/DO/AI Adapter ZA-L2 Low Power External 2 dbi Dipole Antenna Zigbee RS-232/DI/DO/AI Adapter User manual for ZA-L2 and ZA-H5 models Adapter Model ZA-H5 High Power External 5 dbi Dipole Antenna Comparison 1.Packing Contents

More information

Bluetooth to RS-232 Converter. Bluetooth Adaptor Operation Manual

Bluetooth to RS-232 Converter. Bluetooth Adaptor Operation Manual Bluetooth to RS-232 Converter Bluetooth Adaptor Operation Manual First Edition, Nov 2007 Table of Contents 1. Introduction.. 2 2. Package checklist.. 3 3. Product Specification... 4 4. Product Panel Views

More information

MS830 / MS833 Barcode Reader v1.0 9-December-2014

MS830 / MS833 Barcode Reader v1.0 9-December-2014 MS830 / MS833 Barcode Reader v1.0 9-December-2014 Publication Information 2014 Imagine Communications Corp. Proprietary and Confidential. Imagine Communications considers this document and its contents

More information

Datalogger and RS232 Interface

Datalogger and RS232 Interface Datalogger and RS232 Interface RS232 Wiring Hardware 2 RS232 Code.. 3 Hardware Requirements and Setup 4 Software Requirements and Setup.. 5 Communicating Operation. 8 Run the Software......8 Record.. 10

More information

ScanWin Installation and Windows 7-64 bit operating system

ScanWin Installation and Windows 7-64 bit operating system ScanWin Installation and Windows 7-64 bit operating system In order to run the ScanWin Pro install and program on Windows 7 64 bit operating system you need to install a Virtual PC and then install a valid,

More information

Digital Analogue Converter User Guide

Digital Analogue Converter User Guide Digital Analogue Converter User Guide Issue 1 22 May 2014 This page intentionally left blank Page 2 22 May 2014 Contents Introduction... 4 Inputs / Outputs... 4 Standard inventory... 4 Configuring the

More information

A MICROCONTROLLER BASED AUTO TRACKING ROBOT

A MICROCONTROLLER BASED AUTO TRACKING ROBOT A MICROCONTROLLER BASED AUTO TRACKING ROBOT 1. Safety The voltages used in this experiment are less than 10V and normally do not present a risk of shock. Take this opportunity to observe posted safety

More information

Configuring Kepware KEPServerEX 5.0 for Communications with Acromag Busworks Modbus I/O Modules

Configuring Kepware KEPServerEX 5.0 for Communications with Acromag Busworks Modbus I/O Modules Configuring Kepware KEPServerEX 5.0 for Communications with Acromag Busworks Modbus I/O Modules ACROMAG INCORPORATED Tel: (248) 295-0880 30765 South Wixom Road Fax: (248) 624-9234 P.O. BOX 437 Email: sales@acromag.com

More information

USER GUIDE v July 2015

USER GUIDE v July 2015 U S E R G U IDE v. 1.0.0.3.7 July 2015 TABLE OF CONTENTS 1 INTRODUCTION... 3 2 INSTALLATION... 3 3 LAUNCH PROGRAM... 4 3.1 PTT TRACKER FEATURES...6 3.1.1 Toolbar... 6 3.1.2 Connection Tree... 6 3.1.3 Module

More information

Lumio Crystal Touch Manager for Windows User Guide v. 6.9

Lumio Crystal Touch Manager for Windows User Guide v. 6.9 Lumio Crystal Touch Manager for Windows User Guide v. 6.9 April 2012 6355 Topanga Boulevard #335, Woodland Hills, CA 91367, USA Copyright 2012, Lumio Inc. All rights reserved. Important Notice This manual

More information

Contents. Chapter 1 Introduction. In Chapter 1. General Information 1 2 Setting Up QuickLog 1 3. Specifications 1 4 TABLE OF CONTENTS

Contents. Chapter 1 Introduction. In Chapter 1. General Information 1 2 Setting Up QuickLog 1 3. Specifications 1 4 TABLE OF CONTENTS TABLE OF CONTENTS In Chapter 1 Contents Chapter 1 Introduction General Information 1 2 Setting Up QuickLog 1 3 QLW 10/97 OMEGA Specifications 1 4 QuickLog for Windows Owner s Manual i In Chapter 2 Contents

More information

WinCCU Start-Up Guide

WinCCU Start-Up Guide WinCCU Start-Up Guide Desktop Computer w/winccu & Comm ` Remote FCU w/comm MEASUREMENT & CONTROL SYSTEMS Intellectual Property & Copyright Notice 2009 by ABB Inc., ( Owner ), Bartlesville, Oklahoma 74006,

More information

SB-2000 USB Radio Interface Operating Manual CG Antenna Co. Ltd.

SB-2000 USB Radio Interface Operating Manual CG Antenna Co. Ltd. CG Antenna SB-2000 USB Radio Interface Operating Manual CG Antenna Co. Ltd. Shanghai, China FEATURES Connect your computer with USB port. No need serial or parallel port. Most of Radio programs are built

More information

Supply Voltage V dc Supply is fully isolated internally, and protected against transients. Internal power modules are CE certified.

Supply Voltage V dc Supply is fully isolated internally, and protected against transients. Internal power modules are CE certified. Features Precision closed loop inertial sensor with optical position feedback and fluid damping Single axis measurement range ±8 (overrange to ±12 ) High resolution measurement

More information

OPERATION MANUAL. Humidity temperature sensor with serial interface. Characteristics features. Areas of application. Windows-Software.

OPERATION MANUAL. Humidity temperature sensor with serial interface. Characteristics features. Areas of application. Windows-Software. Description Characteristics features Combined Temperature and Humidity measurement Sensor in Stainless steel casing with Sinterfilter Resolution 0.01 % RH, 0.01 C Accuracy 2 % RH, 0.3 C Inclusive of Windows-Software

More information

MX OPC Server Quick Start

MX OPC Server Quick Start Mitsubishi Electric 1-1 MX OPC Server 1.1 Introduction to MX OPC Server The MX OPC Server 5.0 is a Mitsubishi I/O driver OPC Data Access (DA) and Alarm/Events (AE) server that provides the interface and

More information

Handling B. Handling the display unit

Handling B. Handling the display unit Handling B B. Handling the display unit Main menu... B2 Help menus... B3 Store measurement result... B4 Restore and Delete measurement result... B5 Printouts and PC transmitting... B6 EasyLink PC software

More information

How to Connect Stellarium to a Celestron GO TO Mount for Telescope Computer Control

How to Connect Stellarium to a Celestron GO TO Mount for Telescope Computer Control 1) You need the Serial Cable that comes with the hand controller. You also need a Serial to USB converter if your computer does not have a serial port. If it has a serial port you do not need the converter

More information

FLDIGI MARS Usage FLDIGI MARS Use.docx - 19-Nov :08 Terry G. Glagowski, Ph.D / W1TR / AFA1DI

FLDIGI MARS Usage FLDIGI MARS Use.docx - 19-Nov :08 Terry G. Glagowski, Ph.D / W1TR / AFA1DI FLDIGI MARS Usage FLDIGI MARS Use.docx - 19-Nov-2015 16:08 Terry G. Glagowski, Ph.D / W1TR / AFA1DI INTRODUCTION This document describes how to download, install, setup, and use FLDIGI for MARS purposes,

More information

VISUAL DRIVE SETUP. Parameterization software for INFRANOR drives. User manual. Visual Drive Setup 1

VISUAL DRIVE SETUP. Parameterization software for INFRANOR drives. User manual. Visual Drive Setup 1 VISUAL DRIVE SETUP Parameterization software for INFRANOR drives User manual Visual Drive Setup 1 Visual Drive Setup WARNING! VISUAL DRIVE SETUP is a parameterization software for INFRANOR servo drives.

More information

Using Xbee 802.15.4 in Serial Communication

Using Xbee 802.15.4 in Serial Communication Using Xbee 802.15.4 in Serial Communication Jason Grimes April 2, 2010 Abstract Instances where wireless serial communication is required to connect devices, Xbee RF modules are effective in linking Universal

More information

SB-2000 USB Radio Interface Operating Manual CG Antenna Co. Ltd.

SB-2000 USB Radio Interface Operating Manual CG Antenna Co. Ltd. CG Antenna SB-2000 USB Radio Interface Operating Manual CG Antenna Co. Ltd. Shanghai, China FEATURES Connect your computer with USB port. No need serial or parallel port. Most of Radio programs are built

More information

SPID Azimuth Antenna rotator Type: BIG-RAK/HR

SPID Azimuth Antenna rotator Type: BIG-RAK/HR WWW.RFHAMDESIGN.COM SPID Azimuth Antenna rotator Type: BIG-RAK/HR SPID BIG-RAK/HR MD-02 Rotor Controller Type BIG-RAK/HR is a 1 engine rotor system (Azimuth) and delivered including: BIG-RAK/HR rotor 0.2

More information

RX-6 Six In - One Out All in One Receive Antenna Switch Local and Remote Control System RX6ACI User Manual Version 2.1

RX-6 Six In - One Out All in One Receive Antenna Switch Local and Remote Control System RX6ACI User Manual Version 2.1 Universal Device Control Systems www.udcsys.com RX-6 Six In - One Out All in One Receive Antenna Switch Local and Remote Control System RX6ACI User Manual Version 2.1 May, 2014 Universal Device Control

More information

IMU03 and YAW03 Inertial Sensor User Guide

IMU03 and YAW03 Inertial Sensor User Guide IMU03 and YAW03 Inertial Sensor User Guide Issue 1 11 December 2014 This page intentionally left blank Page 2 11 December 2014 Contents Introduction... 4 Features... 4 Standard inventory... 4 Operation...

More information

Instruction Manual. AlfaSpid Rotator and Controller

Instruction Manual. AlfaSpid Rotator and Controller AlfaSpid Rotator and Controller Instruction Manual This manual is for use with units sold by AlfaRadio Ltd. of Edmonton, Alberta, Canada. Units sold by others may have different firmware and may operate

More information

TBS Help Index / On Board Software User Manual

TBS Help Index / On Board Software User Manual TBS Help Index / On Board Software User Manual The TBS 2000 Functional Testing Systems Software has a convenient, quick and easy access on board software help manual. While a hard copy of on board TBS

More information

INDUSTRIAL AUTOMATION. Interactive Graphical SCADA System INSIGHT AND OVERVIEW QUICK START GUIDE

INDUSTRIAL AUTOMATION. Interactive Graphical SCADA System INSIGHT AND OVERVIEW QUICK START GUIDE INDUSTRIAL AUTOMATION Interactive Graphical SCADA System INSIGHT AND OVERVIEW QUICK START GUIDE Page 1 of 26 Quick Start Guide for IGSS FREE50 Introduction This guide is intended to get you up and running

More information

SA-9600 Surface Area Software Manual

SA-9600 Surface Area Software Manual SA-9600 Surface Area Software Manual Version 4.0 Introduction The operation and data Presentation of the SA-9600 Surface Area analyzer is performed using a Microsoft Windows based software package. The

More information

MS-DMT and AMT Installation and Use for M110a Digital Communications

MS-DMT and AMT Installation and Use for M110a Digital Communications MS-DMT and AMT Installation and Use for M110a Digital Communications MS-DMT and AMT Installation and Use for M110a Digtal Communications.docx - 2015-02-18 19:58:00 Terry G. Glagowski, Ph.D. / W1TR / AFA1DI

More information

RcWare SoftPLC Modbus server mapping editor User manual

RcWare SoftPLC Modbus server mapping editor User manual RcWare SoftPLC Modbus server mapping editor User manual 1 Contents 1 Contents... 2 2 Why SoftPLC as a Modbus server... 3 3 Installation and setup of the Modbus mapping editor... 4 4 Creating and editing

More information

Recording and Evaluating CAN Signals

Recording and Evaluating CAN Signals 10/16 Recording and Evaluating Signals Introduction 1 Recording Signals 2 General information 2 Recording the complete signal with HEADlab 3 Creating a sensor 4 Using the sensor in HEAD Recorder 5 Summary

More information

NanoPro Software Training

NanoPro Software Training NanoPro Software Training NanoPro Our NanoPro software is a recommendable tool for: - Configuration - Testing - Troubleshooting - Firmware updates Today, you ll learn how to use the NanoPro software properly.

More information

WA Manager Alarming System Management Software Windows 98, NT, XP, 2000 User Guide

WA Manager Alarming System Management Software Windows 98, NT, XP, 2000 User Guide WA Manager Alarming System Management Software Windows 98, NT, XP, 2000 User Guide Version 2.1, 4/2010 Disclaimer While every effort has been made to ensure that the information in this guide is accurate

More information

Serial Port Configuration

Serial Port Configuration UC2322 / UC2324 / UC4852 / UC4854 USB-to-Serial RS-232 Hub Serial Port Configuration User Manual www.aten.com Serial Port Configuration Overview This user manual provides information to help you configure

More information

Using Bluetooth-Enabled PosiTector 6000 with Statistical Process Control Software

Using Bluetooth-Enabled PosiTector 6000 with Statistical Process Control Software Using Bluetooth-Enabled PosiTector 6000 with Statistical Process Control Software SPC programs are available from third party vendors that enhance the measurement capabilities of the PosiTector 6000. With

More information

GPS DATA LOGGER. User s Manual

GPS DATA LOGGER. User s Manual GPS DATA LOGGER User s Manual Safety Warnings Before using GPS DATA LOGGER, please read and ensure you of fully understood the following safety precautions. The safety precautions describe important details

More information

General Instruments DSR-4800 / 4810 Satellite Receiver

General Instruments DSR-4800 / 4810 Satellite Receiver 2/6/01 DEVICE: General Instruments Satellite Receiver FILE O:\On-Line Tech Docs\Louth\Autosat\DSR-4800.doc REVISION HISTORY: Rev. Date Author Company Description 1.1 Feb 06 2001 Bill Coutts BAS Configuration

More information

RTC Communications Procedure

RTC Communications Procedure RTC Communications Procedure Chapter 1 Chapter 2 Chapter 3 Chapter 4 Appendix A Appendix B Appendix C Appendix D Serial Port Direct Connect AP22 Serial Port Direct Connect CPR2102 Version M Serial Port

More information

RoyalTek Bluetooth GPS Datalog Receiver

RoyalTek Bluetooth GPS Datalog Receiver RoyalTek Bluetooth GPS Datalog Receiver MBT-1100 User Manual V1.0 Published on March 2008 by RoyalTek Company Ltd. (Design and specifications are subject to change without notice.) 1 Content 1. Product

More information

Mini USB & GPS Module Demo Board. User's Guide (SIN BLUETOOTH)

Mini USB & GPS Module Demo Board. User's Guide (SIN BLUETOOTH) Mini USB & GPS Module Demo Board User's Guide (SIN BLUETOOTH) MAYO 2009 GM10 DEVELOPMENT KIT 1/12 Table of contents Chapter 1. Brief Introduction and Port Definition 3 1-1. Product. 3 1-2. Accessories

More information

s!nus-elektrotechnikai bt. Industrial IT & Automation

s!nus-elektrotechnikai bt. Industrial IT & Automation USB/PPI+ Optoelectronic isolated USB/PPI adapter Optoelectronic isolated USB/PPI adapter, can replace Siemens 6ES7 901-3DB30-0XA0, the largest communication distance of up to 2 kilometers. Not support

More information

YellowFrog 2 Power Meter. Manual Version 1.3

YellowFrog 2 Power Meter. Manual Version 1.3 YellowFrog 2 Power Meter Manual Version 1.3 Yellow Frog II Power Meter Manual Version 1.3 YellowFrog II Contents PC Requirements........ 1 YellowFrog Power Meter II Quick Start...... 2 YellowFrog Power

More information

Mission Planner. Tutorial, how to get started. The Mission Planner interface

Mission Planner. Tutorial, how to get started. The Mission Planner interface Mission Planner Tutorial, how to get started The Mission Planner interface Mission Planner is split in different sections. In this tutorial we focus on how-to-get-started and the basic functions in order

More information

Using AKA 65 Software on Your PC

Using AKA 65 Software on Your PC Chapter 7 Using AKA 65 Software on Your PC AKA 65 software can be used for communication with a local AKCESS network (that s one that the PC is directly connected to), and also (over telephone lines) with

More information

Manual. Sealer Monitor Software. Version 0.10.7

Manual. Sealer Monitor Software. Version 0.10.7 Manual Sealer Monitor Software Version 0.10.7 Contents 1 Introduction & symbols 1 2 Installation 2 2.1 Requirements 2 2.2 Installation process 2 3 Menu & Tooblar 5 3.1 File menu 5 3.2 Print menu 6 3.3

More information

Wireless Sensors Point Sensor Pulse Counter Point Sensor Thermistor Point Sensor Power Monitor Point Sensor Magnetic Door

Wireless Sensors Point Sensor Pulse Counter Point Sensor Thermistor Point Sensor Power Monitor Point Sensor Magnetic Door Wireless Sensors Point Six offers an expanded line of wireless sensors to measure temperature, relative humidity, pressure, vibration, analog voltage and current, and discrete digital inputs. Each sensor

More information

VBOX3i Dual Antenna with RTK

VBOX3i Dual Antenna with RTK VBOX3i SL-RTK is Racelogic s most powerful GPS data logging system. The VB3iSL-RTK combines high level accuracy and test repeatability with the ability to measure slip and pitch/roll angles at 100Hz with

More information

Programming and Using the Courier V.Everything Modem for Remote Operation of DDF6000

Programming and Using the Courier V.Everything Modem for Remote Operation of DDF6000 Programming and Using the Courier V.Everything Modem for Remote Operation of DDF6000 1.0 Introduction A Technical Application Note from Doppler System July 5, 1999 Version 3.x of the DDF6000, running version

More information

PenMount 9084 Setup and Users Manu

PenMount 9084 Setup and Users Manu PenMount 9084 Setup and Users Manu DMC9000 for Windows 2000 V2.0 PenMount 9084 control board is the new control board from Salt, its touch screen controller is DMC9000 that interfaces analog resistive

More information

TouchKit TouchScreen Controller User Manual for Windows 2000 / XP Version: 4.0.2

TouchKit TouchScreen Controller User Manual for Windows 2000 / XP Version: 4.0.2 TouchKit TouchScreen Controller User Manual for Windows 2000 / XP Version: 4.0.2 1 CONTENT CHAPTER 1. TOUCH PANEL CONTROLLER 2 1.1 Controller 2 1.2 Specifications and Features 3 CHAPTER 2. INSTALLING TOUCHKIT

More information

4 inputs for standardized signal measuring 0 10 V, 0 20 ma, 4 20 ma. Communication via RS232 or RS485 lines

4 inputs for standardized signal measuring 0 10 V, 0 20 ma, 4 20 ma. Communication via RS232 or RS485 lines Measuring converter 4 inputs for standardized signal measuring 0 10 V, 0 20 ma, 4 20 ma Communication via RS232 or RS485 lines 15. June 2009 w w w. p a p o u c h. c o m 0294.01.02 Datasheet Created: 4.5.2007

More information

Setting up a Local Interconnect Network (LIN) using dspace MicroAutoBox 1401/1501 Simulink Blocks

Setting up a Local Interconnect Network (LIN) using dspace MicroAutoBox 1401/1501 Simulink Blocks Setting up a Local Interconnect Network (LIN) using dspace MicroAutoBox 1401/1501 Simulink Blocks Guiseppe Ferro Design Team 4 3/22/13 Executive Summary Learn how to setup and properly use the Real- Time

More information

Control Center Series 30 User Manual For CCS30 Version 1.1

Control Center Series 30 User Manual For CCS30 Version 1.1 Control Center Series 30 User Manual For CCS30 Version 1.1 Index 1 Installation... 4 1.1 Microsoft.Net 2.0...4 2 General Functions... 5 2.1 Search for Devices...5 2.1.1 Default Search...5 2.1.2 Advanced

More information

Multi-Display Administrator User Manual

Multi-Display Administrator User Manual Multi-Display Administrator User Manual Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents of this document. BenQ Corporation

More information

TOPCON REAL-TIME KINEMATIC (RTK) + POST-PROCESSING KINEMATIC (PPK) SURVEY NOTES

TOPCON REAL-TIME KINEMATIC (RTK) + POST-PROCESSING KINEMATIC (PPK) SURVEY NOTES TOPCON REAL-TIME KINEMATIC (RTK) + POST-PROCESSING KINEMATIC (PPK) SURVEY NOTES! & ' " " #$ $ % UNAVCO, Inc. Page 2 BASE STATION SETUP 1. Set up the GPS antenna using a tripod or other antenna mount. Level

More information

Universal Link Cable User Guide

Universal Link Cable User Guide User Guide Honeywell Industrial Measurement and Control 2500 W. Union Hills Drive 34-XY-25-12 Phoenix AZ, 85027 Rev 1 10/05 Table of Contents 1. ABOUT THE UNIVERSAL LINK CABLE...1 2. SETTING UP A RS-232

More information

CanWay User S Manual. 2012 December

CanWay User S Manual. 2012 December CanWay User S Manual 2012 December Contents Install CanWay.3 Read GPS Log From Device... 5 Clear Data Logger Memory... 10 Data Logger Configuration... 10 Track List Window... 12 TAB List Window... 12 Add

More information

RS-232/422/485 to Bluetooth. Quatech Model SS-BLT-300 Operation Manual

RS-232/422/485 to Bluetooth. Quatech Model SS-BLT-300 Operation Manual RS-232/422/485 to Bluetooth Quatech Model SS-BLT-300 Operation Manual First Edition, May 2008 Table of Contents 1. Introduction 2 2. Package checklist 3 3. Product Specification 4 4. Product Panel Views

More information

USER GUIDE M2M Point to Multipoint

USER GUIDE M2M Point to Multipoint USER GUIDE M2M Point to Multipoint TABLE OF CONTENTS 1 INSTALLATION... 3 1.1 SUB-STATIONS... 3 1.2 MASTER STATION (PC)... 3 2 CONNECTING THE INPUTS AND OUTPUTS... 4 2.1 DIGITAL CONNECTIONS... 4 2.2 ANALOG

More information

Using the MT8852B to Test a Bluetooth Low Energy Device Controlled through an HCI or 2-Wire Interface

Using the MT8852B to Test a Bluetooth Low Energy Device Controlled through an HCI or 2-Wire Interface Application Note December 2010 Using the MT8852B to Test a Bluetooth Low Energy Device Controlled through an HCI or 2-Wire Interface BLE Overview Scope of this Application Note BLE Testing on the MT8852B

More information

Power Log. Users Manual. PC Application Software

Power Log. Users Manual. PC Application Software Power Log PC Application Software Users Manual May 2007 2007 Fluke Corporation, All rights reserved. All product names are trademarks of their respective companies. Fluke Corporation FLUKE Power Log Software

More information

A1035-H GPS USB Reciver Module

A1035-H GPS USB Reciver Module A1035-H GPS USB Reciver Module Introduction: A1035-H GPS USB Receiver Module from NEX Robotics is based on the SiRF Star III technology. It can be directly interfaced with the PC. GPS module has onboard

More information

GPRS Data Logger [built in GPS]

GPRS Data Logger [built in GPS] GS902 GPS Data & Measurement Logging 2 x Analog Channels + 2 x Pulse Channel + 4 x Digital Channels + 2 x Relay Outputs Upload Data & GPS information via GPRS and SMS on schedule or alarm triggered Programmable

More information

PICO Plug User Manual

PICO Plug User Manual PICO Plug User Manual 1. Introduction The PICO Plug is an universal Bluetooth adapter for peripheral devices with parallel or serial interface. With factory settings the PICO Plug can only act as a Bluetooth

More information

Setting up a Hyper Terminal Application

Setting up a Hyper Terminal Application Setting up a Hyper Terminal Application 1. Start a HyperTerminal session from the start menu. 2. Enter a name for the terminal session (e.g., LS 331, LS 332, LS340) and click OK. 3. Select the COM Port

More information

VK3UM EME Planner. Table of Contents

VK3UM EME Planner. Table of Contents Table of Contents Introduction Program Options Main Opening Screen. VK3UM DXCC Data Base EME Planner Calculator Global Spatial offset Sources and Planet Display Sources and Planet Planner Sky Noise Map

More information

Physical Requiiremnts of the GPS Receiver

Physical Requiiremnts of the GPS Receiver CORS GPS Receiver Bid Specifications The specification below outlines the requirements for a dual frequency (L1/L2, L2C), network compatible GPS receiver for CORS reference station purposes. Regulations

More information

DMK-DMG Data Logger INDEX

DMK-DMG Data Logger INDEX I154 GB 0510 DMK-DMG Data Logger SOFTWARE MANUAL INDEX Introduction... 2 Minimum resources of the PC... 2 Installation... 2 Activation of the PC - DMK connection... 3 Basic principles... 4 Main window...

More information

Quick Guide to GPS Data Logger and Receiver / GR-106

Quick Guide to GPS Data Logger and Receiver / GR-106 Quick Guide to GR-106, GPS Data Logger and Receiver Overview In addition to per-second location data output, GR-106 also supports location data log in local memory. After a trip is completed, the logged

More information

STIM202 Evaluation Kit

STIM202 Evaluation Kit Table of contents: 1 FEATURES... 2 2 GENERAL DESCRIPTIONS AND SYSTEM CONTENTS... 2 3 SYSTEM REQUIREMENTS... 2 4 GETTING STARTED... 3 4.1 INSTALLATION OF NI-SERIAL CABLE ASSEMBLY DRIVER... 3 4.2 INSTALLATION

More information

GS902. GPRS Data Logger [built in GPS]

GS902. GPRS Data Logger [built in GPS] Sirius Corp GPRS Data Logger [built in GPS] GS902 GPS Data & Measurement Logging 2 x Analog Channels + 1 x Pulse Channel + 4 x Digital Channels + 2 x Relay Outputs Upload Data & GPS information via GPRS

More information

XBee USB Wireless Module

XBee USB Wireless Module XBee USB Wireless Module Introduction: XBee USB wireless adaptor board is used for interfacing any of the series 1 XBee wireless modules with the PC. Using this USB adaptor board for XBee wireless modules

More information

TFA. KlimaLogg Pro. User Manual. Revision: 0.1

TFA. KlimaLogg Pro. User Manual. Revision: 0.1 TFA KlimaLogg Pro User Manual Revision: 0.1 Table of Contents Overview... 2 Getting Started... 2 Setting up the KlimaLogg Pro device... 2 Installing the USB-Stick... 2 Installation... 2 System Requirements...

More information

Universal isolated USB to serial converter and RS232 to RS485/422 converter.

Universal isolated USB to serial converter and RS232 to RS485/422 converter. GS180 Universal isolated USB to serial converter and RS232 to RS485/422 converter. Multifunctional unit, converts: USB RS232/485/422 or RS232 RS485/422 Powered via USB port or external power adaptor Compact

More information