USER GUIDE. Aleratec DVD/CD RoboRacer LS. Part No
|
|
- Bertina Lindsey
- 7 years ago
- Views:
Transcription
1 USER GUIDE Aleratec DVD/CD RoboRacer LS Part No
2
3 Table of Contents Welcome!...1 Included Items...1 Product Features...2 Key Items on the DVD/CD RoboRacer LS...2 Installing the Hardware...3 Software Installation...4 Installing the RoboRacer LS Utility...4 Nero Essentials Installation...8 Updating the LightScribe System Software...15 Creating an Image with Nero...18 Creating an Image from a Source Disc...22 Getting Acquainted with the RoboRacer LS Software...24 Using RoboRacer LS to Burn an ISO Disc...27 LightScribe Labeling...29 Technical Support Addresses and Phone Numbers
4
5 Welcome! Congratulations on your purchase of an Aleratec DVD/CD RoboRacer LS, considered by industry experts to be one of the finest DVD/CD Duplicators available. The entire Aleratec team is committed to providing you with courteous service. Our knowledgeable staff will strive to make owning and operating your new Aleratec DVD/CD RoboRacer LS a pleasant experience. This User Guide will lead you step-by step through the operation procedures of your DVD/CD duplicator. We at Aleratec appreciate your selection of our product, and wish you great success and enjoyment of your new DVD/CD RoboRacer LS. Check out Aleratec Online! Included Items 1 DVD/CD RoboRacer LS 1 Disc Output Bin Holder Disc Capacity Disc Output Bin 1 50-Disc Capacity Disc Output Bin Disc Capacity Guide Rods 4 50-Disc Capacity Guide Rods 1 USB 2.0 Cable 1 Power Cord with Switch 1 External Power Supply 1 Disc Publishing Software Suite CD 1 Nero 7 Essentials CD 1
6 Product Features The DVD/CD RoboRacer LS is a versatile robotic desktop DVD/CD copying and LightScribe printing solution. Fully Automatic Disc Publisher Fully automatic disc handling 100 disc capacity Duplicate and LightScribe label Unattended operation Key Items on the DVD/CD RoboRacer LS B 8 C A 1. Clear Plastic Disc Guide Rods 2. Power and Function Indicator LED 3. LightScribe DVD Recorder 4. Disc Tray Control Arm 5. Disc Input Bin 6. Protective Cover 7. Disc Bin Holder 8. Disc Output Bin A. Power Plug B. High Performance Cooling Fan C. USB 2.0 to the PC 2
7 Installing the Hardware 1. Remove the DVD/CD RoboRacer LS from the box, plug the power cord into the end of the external power supply and plug the power cord into a 110VAC power source. Plug the power supply cord into the DVD/CD RoboRacer LS and leave the power switch off, (power on the device after the software has been installed). Place the RoboRacer LS on a level surface. 2. Attach the USB cable into the PC and the RoboRacer LS. 3. Slide the bin holder into the slot on the left side of the RoboRacer LS case and place a disc output bin into the bin holder. There are two output bins included (50 disc capacity, 100 disc capacity). Make sure to keep the output bins that come with the Although similar to a normal disc media cover, the Disc Output Bins are for specific use with the RoboRacer LS. When installing, make sure that the flanges on the bin are touching the lip of the bin holder. If the bin is not pushed down as far as it can go, the edge of the bin could interfere with the disc output. To use the 100 disc bin, the DVD/CD RoboRacer LS should be placed at the edge of a desk or table. Make sure that the bin does not touch the edge of the desk or table surface. 4. Take the clear plastic disc guide rods and place them into the 4 holes in the top of the unit. To load the discs into the input bin, take one disc and place it horizontally level in the input bin. Now you can load the rest of the discs. All of the discs need to be level with the sides of the stack straight. Note: Choose a Good Location 1. Allow adequate clearance for moving parts. 2. Do not place near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock. 3. Good care will help assure maximum product life. Improper operating environment and misuse may void the warranty. 3
8 Software Installation Installing the RoboRacer LS Utility 1. Load the installation CD in the DVD/CD ROM drive in your PC. Double-click on RoboRacer LS Utility from the menu. Click Next to begin. 2. Choose where you would like to install the program and click Next. 4
9 3. Choose where you would like the program s Start menu shortcuts to be installed and click Next. 4. Choose what shortcuts you would like to have created by checking the check boxes, and click Next. 5
10 Installing the RoboRacer LS Utility - continued 5. Review the installation procedure to make sure that you are installing what you would like and click Install. 6. When installation is complete the setup utility will display the following: De-check the box Launch RoboRacer LS Utility. Click Finish to complete the software installation. 6
11 7. If you did not de-check the box and the was not plugged into the USB port or the power to the device was turned off then the display box will show: 7
12 Nero Essentials Installation 1. Open the Nero installation utility. Click Install Nero 7 Essentials. 2. Click Nero 7 Essentials again. 8
13 3. After a short delay, Windows Installer will start the Nero installation Wizard. When this screen is shown, click Next. 4. Agree to the user agreement by checking the checkbox in the lower left corner. Then click Next. 9
14 Nero Essentials Installation - continued 5. At this screen, fill out the fields you would like. When finished clicked Next. Leave the Serial Number that is automatically displayed. 6. Choose the Custom option and click Next. 10
15 7. Select the languages you want to be supported and click Next on this screen. 8. Select only Nero Express Essentials and Nero CoverDesigner, then click Next. 11
16 Nero Essentials Installation - continued 9. When the final setup is complete, click Install to begin the installation process. 10. During the installation process this screen will be displayed. 12
17 11. Near the end of the installation process, this screen will appear asking if you would like to install any shortcuts. Check the boxes of the shortcuts you would like and then click Next. 12. When installation is complete this screen will appear. Click Finish to exit back to the installer display. 13
18 Nero Essentials Installation - continued 13. Once back to this screen, click Exit. 14. You can now exit this screen as well by clicking Exit. You are ready to use the RoboRacer LS. 14
19 Updating the LightScribe System Software 1. To install the LightScribe Utility needed to use the LightScribe feature of the click on the LS installer. 2. Choose the Run option on the Windows security warning to allow the installer to begin. 3. The installer will begin by extracting the installer. 15
20 Updating the LightScribe System Software - continued 4. When extraction is complete The InstallShield Wizard will begin. Click the Next button. 5. Agree to the License Agreement by choosing the upper bubble and click the Next button. 16
21 6. The installation will run and take a minute or so to complete. 7. When the installer is finished this screen will be displayed. Click the Finish button to exit the installer. 17
22 Creating an Image with Nero 1. Start the Nero Express Essentials program. 2. The screen below will be displayed. For this example choose Data and Data CD. 18
23 3. Add any data file by using the Add option or by dragging and dropping a file or files into the large white area. When finished adding, click the Next button. 4. The next display you will see is a label printing screen. Un-check the Print label box at the bottom center of the display and click the Next button. 19
24 Creating an Image with Nero - continued 5. In the final display before creating an image, make sure that Image Recorder in the dropdown menu to the right of Current Recorder is selected. Fill out the disc name if you would like, and when you are ready, press the Burn button at the lower right. 6. After the burn button is pressed the Save Image File screen will appear. In the lowest dropdown menu called Save as type: select ISO Image Files (.iso). Type in the name you would like the image file to be and then click the Save button. 20
25 7. After clicking the save button the write progress screen will appear. 8. The image process is successful when Nero displays this screen. 21
26 Creating an Image from a Source Disc 1. From the main menu of Nero Express, select the Image, Project, Copy option. From the right menu choose either Copy Entire CD or Copy Entire DVD. 2. The next screen displayed will contain the source drive and destination drive of the copy that will be performed. For the Source drive dropdown menu, ensure that the drive selected is the drive that contains the source disc that you will be creating an image of. The Destination drive dropdown menu will need to be selected as the Image Recorder. This will allow you to save the image to your computer s hard drive. Leave the number of copies at 1. When your settings are correct, click the Copy button. 22
27 3. The next step requires you to tell Nero where to save the image file. Name the file and notice that it will save the file as a Nero image file (.nrg). When you are ready click the Save button and Nero will begin copying the source disc. 4. The Nero progress bar will be displayed and when you are finished you will see a final screen displaying your file was successful. 23
28 Getting Acquainted with the RoboRacer LS Software 1. Connect the USB cable from the DVD/CD RoboRacer LS to the PC and power on the DVD/CD RoboRacer LS. Check to see that Windows has recognized the new device. To do this, go to My Computer and check to see that the Aleratec drive has appeared. If the drive is not displayed in My Computer the RoboRacer LS software will not work. Note: In some cases the PC will not boot if the RoboRacer LS is connected to the PC and powered on before the PC. 2. Open the RoboRacer LS software by double-clicking the RoboRacer LS icon. The screen shown below will be displayed. The RoboRacer LS Automation tab contains the following: a. The operation that RoboRacer LS is running will be displayed in the box area. (shown blank here) b. The upper left corner displays the current COM port and drive letter location. 24
29 c. Go! starts the automatic operation of the DVD/CD RoboRacer LS for LightScribe Labeling and begins the Disc Recording procedure for automatically burning pre-existing disc images. The Go! button can be activated after Disc Recording or LightScribe Labeling is selected. Note: Click the Aleratec logo to go to the Aleratec website. Click the Buy Media button to go to Aleratec s media webpage for an excellent selection of duplicator grade LightScribe recording media. d. Click Cancel to stop current auto loading actions. e. To start a new job, select the Disc Recording or LightScribe Labeling and click the Go! to restart. 3. The Utilities tab manually operates the RoboRacer LS. a b c d a. The Remove Disc button ejects the drive tray and rotates the drive tray arm to the side allowing the hinged part of the tray to drop to the reject disc position. b. The Eject button will open the drive tray. c. The Load Disc button will eject the drive tray and activate the disc loading mechanism causing a disc to drop into the drive tray. The drive tray will then close. d. The Close Tray button will close the drive tray. 25
30 Getting Acquainted with the RoboRacer LS Software - continued 4. To Test, click the Load Disc button and see if the RoboRacer LS will load one disc. After loading the disc, click the Eject button and the disc should be delivered to the output bin. The DVD/CD RoboRacer LS is ready to use. 26
31 Using RoboRacer LS to Burn an ISO Disc 1. Start the RoboRacer LS software. 2. Select the Disc Recording button. 3. Click the Go! button and you will now see a display box that will ask you to choose several options. The first option is the image file that you would like to duplicate. Click the Browse button to find the image file you want. Then choose either CD or DVD media depending on the media you are going to use. Type in how many copies you would like from 1 to 100, and then click the OK button to start the automatic disc burning process. 27
32 Using RoboRacer LS to Burn an ISO Disc - continued 4. The screen will return to this display and the RoboRacer LS will burn the number of discs required. 5. When finished the display will show the job as successful. 28
33 LightScribe Labeling The following shows you how to print a batch of LightScribe labels. 1. Start at the RoboRacer LS main screen. 2. Choose the LightScribe Labeling Option. 29
34 LightScribe Labeling - continued 3. Click the Go! button to set the RoboRacer in the auto-load mode. 4. Open Nero Express Essentials and choose the Print LightScribe Labels menu. If there is no Print LightScribe Label icon on the left side menu go to step 5. Sometimes the Print LightScribe Label in the right side menu can be grayed out. If it is, click on the grayed out icon and a display box will prompt you to select the current recorder. Click Yes and the Print LightScribe Label option will no longer be grayed out. Click the now colored Print LightScribe Label and go on to step
35 5. If the Print LightScribe Label option is not on the screen, go to the screen as shown below. To get to this screen, refer to Creating an Image with Nero and follow steps 2 through 5. The screen below is the same screen as described in step 5. While going through steps 2 through 5, you do not need to set up any files, simply use the Next button until you see this screen. Then, select the Current recorder dropdown box and choose the ALERATEC DVDRW 20A1H as the drive to be used. Then use the Back button to return to the Nero Express Essentials main menu. The Print LightScribe Label option should now be selectable. 6. The first screen you will see is the disc layout. Choose the print design from a file or create your own. When you are done, click Next. 31
36 LightScribe Labeling - continued 7. In this screen choose the print quality that you would like as well as the number of discs to print. Also make sure that the selected drive is listed as ALERATEC DVDRW 20A1H. When these settings are complete click the Print button. Auto Labeling will begin after a short delay. 8. When the LightScribe labeling job has been completed Nero will display this screen. The RoboRacer display will be similar to this. 32
37 Technical Support Addresses and Phone Numbers By By Telephone: Technical Support Group can be reached 8:00 AM to 5:00 PM, Pacific Time, Monday through Friday, excluding U.S. holidays. Please try to call from a phone near your computer system. Access is available 24 hours a day, 365 days a year, via: The World Wide Web at: FAX at:
38 Document Number: _ENG_Rev. E Copyright 2011 Specifications subject to change without notice. Aleratec, Inc Owensmouth Avenue Chatsworth, CA U.S.A.
QUICK START GUIDE. Aleratec 1:2 DVD/CD Copy Cruiser Pro HLX Win/Mac. Part No. 260167
QUICK START GUIDE Aleratec 1:2 DVD/CD Copy Cruiser Pro HLX Win/Mac Part No. 260167 Welcome! Congratulations on your purchase of an Aleratec 1:2 DVD/CD Copy Cruiser Pro Win/Mac, considered by industry experts
More informationQUICK START GUIDE. Aleratec 1:3 Blu-ray/DVD/CD LightScribe Duplicator SA. Part No. 260201
QUICK START GUIDE Aleratec 1:3 Blu-ray/DVD/CD LightScribe Duplicator SA Part No. 260201 Welcome! Congratulations on your purchase of an Aleratec 1:3 Blu-ray/DVD/CD LightScribe Duplicator SA, considered
More informationUSER GUIDE. Aleratec DVD/CD RoboRacer LS Duplex Win/Mac. Part No. 280113
USER GUIDE Aleratec DVD/CD RoboRacer LS Duplex Win/Mac Part No. 280113 Copyright/Model Identification The content of this manual is for informational purposes only and is subject to change without notice.
More informationSOFTWARE USER GUIDE. Aleratec. Part No. 330113, 330113EU. 1:10 USB 3.0 Copy Cruiser Mini
SOFTWARE USER GUIDE Aleratec 1:10 USB 3.0 Copy Cruiser Mini Part No. 330113, 330113EU Copyright/Model Identification The content of this manual is for informational purposes only and is subject to change
More informationMaxtor OneTouch User's Guide
EXTERNAL HARD DRIVE Maxtor OneTouch User's Guide TM II P/N:20259600 i Contents 1 Introduction................................................. 1 Maxtor OneTouch II Drive Components............................
More informationMini Amazing Box 4.6.1.1 Update for Windows XP with Microsoft Service Pack 2
Mini Amazing Box 4.6.1.1 Update for Windows XP with Microsoft Service Pack 2 Below you will find extensive instructions on how to update your Amazing Box software and converter box USB driver for operating
More informationGuide to Installing BBL Crystal MIND on Windows 7
Guide to Installing BBL Crystal MIND on Windows 7 Introduction The BBL Crystal MIND software can not be directly installed on the Microsoft Windows 7 platform, however it can be installed and run via XP
More informationHOW TO BURN A CD/DVD IN WINDOWS XP. Data Projects
Page 1 HOW TO BURN A CD/DVD IN WINDOWS XP There are two ways to burn files to a CD or DVD using Windows XP: 1. Using Sonic RecordNow! Plus or 2. Using the Windows Explorer CD Burning with Sonic Recordnow!
More informationEPSON Stylus. Start Here
EPSON Stylus C84 EPSON Stylus Start Here C84 CPD-16675R1 4043482-00 XXX 1 Unpack 1 Remove everything from the box. Paper support Printer Manual Power cord Ink cartridges CD-ROM 2 Remove all the blue tape
More informationFujitsu SCSI Scanner Installation Procedures Windows 95\98\98SE\ME\2000\XP\Vista
If you are installing the following models by means of the SCSI interface then please use this document. Fi-5530C2 Fi-6140 Fi-6670\A Fi-6240 Fi-6770\A Hardware requirements. You will need a PC system that
More informationPrinter Support Guide. FedEx Ship Manager Software
Printer Support Guide FedEx Ship Manager Software Printer FAQs Installing Printer Drivers How do I download and install the Zebra printer drivers? To download and install the current Zebra printer drivers
More informationXConsole GUI setup communication manual September 2010.
XConsole GUI setup communication manual September 2010. XConsole is compatible with Microsoft XP, Vista and Windows 7. The software will also work if using Boot camp on a Mac. IMPORTANT NOTES: - Do NOT
More information*Section 1: Installing the Lightscribe Template Labeler Software
*Section 1: Installing the Lightscribe Template Labeler Software **Note: Images displayed represent examples and are not intended as literal selections.** -Place the setup disk in the computer drive -Double
More informationBelow are the instructions for downloading the Dartfish Software Files from the website:
Below are the instructions for downloading the Dartfish Software Files from the website: 1. TO ACCESS THE FILES TO DOWNLOAD - Using the computer that you wish to install the Dartfish software on, connect
More informationCreating Disc Labels on Your Notebook Using LightScribe
Creating Disc Labels on Your Notebook Using LightScribe Document Part Number: 383416-001 February 2005 Copyright 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject
More informationUSER GUIDE. Aleratec 1:3 Blu-ray/DVD/CD LightScribe Duplicator SA. Part No. 260201
USER GUIDE Aleratec 1:3 Blu-ray/DVD/CD LightScribe Duplicator SA Part No. 260201 Copyright/Model Identification The content of this manual is for informational purposes only and is subject to change without
More informationSimple Computer Backup
Title: Simple Computer Backup (Win 7 and 8) Author: Nancy DeMarte Date Created: 11/10/13 Date(s) Revised: 1/20/15 Simple Computer Backup This tutorial includes these methods of backing up your PC files:
More informationGetting Started with the OmniKey Card Reader
Getting Started with the OmniKey Card Reader Congratulations! You ve taken the plunge and purchased the OmniKey Card Reader. These instructions will guide you through installing the LogCard Utility and
More informationUSB2VGA. Instruction Manual. USB to VGA Adapter. USB 2.0 to VGA External Multi Monitor Video Adapter
USB to VGA Adapter USB2VGA Instruction Manual USB 2.0 to VGA External Multi Monitor Video Adapter FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class
More informationOnly smart people read the manual.
Only smart people read the manual. Contents Getting Started... 1 Installing the FreeAgent Tools... 1 Using the FreeAgent Tools Icons... 9 Using the System Tray Icon... 10 Disconnecting the FreeAgent Drive...
More information*Section 1: Installing the Lightscribe Template Labeler Software
*Section 1: Installing the Lightscribe Template Labeler Software **Note: Images displayed represent examples and are not intended as literal selections.** -Place the setup disk in the computer drive -Double
More informationZP 500 Plus Thermal Printer
Quick Installation Guide FedEx Ship Manager Software FedEx Ship Manager at fedex.com ZP 500 Plus Thermal Printer Step 1: Confirm Printer Kit Contents Your printer kit contains: 1. Thermal Printer 4. USB
More informationUSER GUIDE. Aleratec DVD/CD Stand-Alone Duplicators
USER GUIDE Aleratec DVD/CD Stand-Alone Duplicators Part No. 260155... 1:1 DVD/CD Copy Cruiser Pro HS Part No. 260156... 1:1 DVD/CD Copy Cruiser Pro HLS Part No. 260157... 1:2 DVD/CD Copy Cruiser Pro HLX
More informationParallels Desktop for Mac
Parallels Software International, Inc. Parallels Desktop for Mac Quick Start Guide 3.0 (c) 2005-2007 Copyright 2006-2007 by Parallels Software International, Inc. All rights reserved. Parallels and Parallels
More informationIT Quick Reference Guides Using Windows 7
IT Quick Reference Guides Using Windows 7 Windows Guides This sheet covers many of the basic commands for using the Windows 7 operating system. WELCOME TO WINDOWS 7 After you log into your machine, the
More informationUSB 2.0 to VGA Quick Installation Guide
Introduction USB 2.0 to VGA Quick Installation Guide The USB 2.0 to VGA allows you to connect an additional display to your desktop or notebook PC and use it as an extended desktop or as an additional
More informationChapter 1 Downloading Images to Your Computer (Windows)
Software User Guide For the safe use of your camera, be sure to read the Safety Precautions thoroughly before use. Types of software installed on your computer varies depending on the method of installation
More informationNOTICE WELCOME MESSAGE
WELCOME MESSAGE Thank you for choosing the U-Print CDP78 CD/DVD Printer. The U-Print is compact and extremely easy to use, giving you the ability to customize your CDs and DVDs by directly printing onto
More informationGetting to Know Your Mobile Internet Key
Thank you for choosing the Huawei E3276 4G LTE Mobile Internet Key. With your Mobile Internet Key, you can enjoy a full high speed Internet experience on the go. This guide shows you how to set-up and
More informationQUICK START GUIDE. SG2 Client - Programming Software SG2 Series Programmable Logic Relay
QUICK START GUIDE SG2 Client - Programming Software SG2 Series Programmable Logic Relay SG2 Client Programming Software T he SG2 Client software is the program editor for the SG2 Series Programmable Logic
More informationIVS-Basic 4.4 IVS-Professional 4.4 IVS-PowerPoint 1.1
Manual IVS-Basic 4.4 IVS-Professional 4.4 IVS-PowerPoint 1.1 Supplement connecting USB RF-II Base Station 1213 2 Contents Contents... 3 Connecting the RF-II Base Station to the USB port... 4 Using the
More informationEXTERNAL HARD DRIVE Maxtor OneTouch User s Guide
EXTERNAL HARD DRIVE Maxtor OneTouch User s Guide P/N: 20246100 Warranty Maxtor s warranty obligations are limited to the terms set forth: Maxtor warrants only to the original consumer purchaser that new
More informationCreating a Poster in PowerPoint 2010. A. Set Up Your Poster
View the Best Practices in Poster Design located at http://www.emich.edu/training/poster before you begin creating a poster. Then in PowerPoint: (A) set up the poster size and orientation, (B) add and
More informationWindows XP.. ELITE Firmware Update procedures.. v1.41
Windows XP.. ELITE Firmware Update procedures.. v1.41 Download and Extract the ELITE update. Note.. Please ensure you are logged in to Windows as an Administrator before carrying out the instructions in
More informationThe Coast to Coast AM Podcast for itunes 11
The Coast to Coast AM Podcast for itunes 11 System Requirements In order to run itunes 11, please see the system requirements at http://www.apple.com/itunes/download/. A Note on Downloading Directly to
More informationUSB Driver Installation for Windows XP
USB Driver Installation for Windows XP USB Serial Converter Driver Installation for Windows XP CAUTION: You must use the drivers on the CD-ROM supplied with your USB Device. DO NOT download drivers from
More informationBluetooth Wireless USB Adapter. User Manual (GBU221P)
Bluetooth Wireless USB Adapter User Manual (GBU221P) 1 2006 IOGEAR. All Rights Reserved. M0394 IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and
More informationGuide for Remote Control PDA
030.0051.01.0 Guide for Remote Control PDA For Use with Bluetooth and a PC Running Windows 7 Table of Contents A. Required Parts... 3 B. PC Software Installation... 3 C. Configure PC Software... 4 D. Testing
More informationInstructions for Installing and Using the FOCUS DL-15 Data Transfer Software
27 March 2015 Instructions for Installing and Using the FOCUS DL-15 Data Transfer Software Introduction This guide will walk you through the process of transferring data from the FOCUS DL-15 to the computer
More informationInstallation Instructions for 9555 USB Driver
Prior to using the data modem features of your 9555 handset; you must first install the VCOMPORT 9555 USB Driver. This driver is compatible with: Windows XP Service Pack 2, Windows 2000 Service Pack 4,
More informationThe Rush 24/7 Podcast for itunes 11
The Rush 24/7 Podcast for itunes 11 System Requirements In order to run itunes 11, please see the system requirements at http://www.apple.com/itunes/download/. A Note on Downloading Directly to Mobile
More informationCyberLink. LabelPrint. User s Guide
CyberLink LabelPrint User s Guide Copyright and Disclaimer All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means electronic,
More informationImage Backup and Recovery Procedures
Image Backup and Recovery Procedures Thank you for purchasing a Fujitsu computer. Fujitsu is committed to bringing you the best computing experience with your new system. It is very important that you
More informationLoss of data can happen in many ways. One of the most common causes is hard drive failure. Hard drives can die without warning.
Backing up Important Data Data Backup Procedures for Medford High School Faculty & Staff Backup Procedures for saving to: Zip Drives CD-ROM Drives Floppy Disks Data Travelers And how to use the Windows
More informationScanShell.Net Install Guide
ScanShell.Net Install Guide Please install the software first - DO NOT PLUG IN THE SCANNER The scanner has been carefully packaged to avoid damage during transportation. Before operating the scanner, please
More informationNero BackItUp Manual. Nero AG
Nero BackItUp Manual Nero AG Copyright and trademark information The Nero BackItUp manual and all its contents are protected by copyright and are the property of Nero AG. All rights reserved. This manual
More informationPIGCHAMP MOBILE. PigCHAMP Knowledge Software. Installation Guide for Mobile Units
PIGCHAMP MOBILE PigCHAMP Knowledge Software Installation Guide for Mobile Units Table of Contents: Important Note:... 4 Chapter 1: PC Setup... 5 A. Install PigCHAMP Mobile Manager on Windows XP...5 B.
More informationPLEASE PRINT THESE INSTRUCTIONS OUT.
PLEASE PRINT THESE INSTRUCTIONS OUT. Directions on How to Install and Configure Lotus Notes 8.5.3 on PCs Download & Install Lotus Notes Download and save lotus_notes853_win_en.exe as directed in the email
More informationWireless Network Adapter Installation
Belkin 54 Mbps Wireless Network Adapter Installation Version 1.0 Copyright Copyright 2013 Watthour Engineering Co., Inc.. All rights reserved. Information in this document is subject to change without
More informationPC Troubleshooting Steps
PC Troubleshooting Steps This FAQ is designed to help PC users to go through various troubleshooting steps to allow them to view the FerrisConnect Learn/Vista sites appropriately. Compatible Browsers Check
More informationAddonics. DVD±R/RW DigiCopier. Users Guide Revision 1.0
Addonics T E C H N O L O G I E S DVD±R/RW DigiCopier Users Guide Revision 1.0 FCC Warning Statement This equipment has been tested and found to comply with the limits for a class B digital device pursuant
More information15 Digital Photo Frame Instructional Manual
15 Digital Photo Frame Instructional Manual aluratek.com mnl M10054 ADMPF315F Copyright 2011 Aluratek, Inc. All Rights Reserved. Table of Contents Frame Close-up... Remote Control Close-up... Package Contents...
More informationScan2CRM for ACT! User Guide
Scan2CRM for ACT! User Guide APPENDIX Warranty... I Notice to user...ii Publication...III Trademarks...IV Version 9.50 - Supports ACT! by Sage for windows, ACT! 2007 (Version 9) and above. This publication
More informationUSB 3.0 to Multi Monitor Video Adapter Quick Installation Guide
USB 3.0 to Multi Monitor Video Adapter Quick Installation Guide Introduction The USB 3.0 to Multi Monitor Video Adapter allows you to connect a monitor, LCD or projector to your desktop or notebook computer
More informationCool USB 2.0/eSATA to SATA Docking Duplicator Quick Installation Guide
Cool USB 2.0/eSATA to SATA Docking Duplicator Quick Installation Guide Introducing the SATA Docking Duplicator The Cool USB 2.0/eSATA to SATA Docking Duplicator adds extra storage space to your computer
More informationUSB to Serial Quick Installation Guide
Introduction USB to Serial Quick Installation Guide SIIG's USB to Serial is designed to instantly add an additional RS232 9-pin serial port to your computer via an available USB port. Key Features and
More informatione-dpp 4.0.2 May 2013 Quick Installation Guide Microsoft Windows 2003 Server, XP, Vista, 7 Access Database
e-dpp 4.0.2 May 2013 Microsoft Windows 2003 Server, XP, Vista, 7 Access Database ELTECHS Engineering and Consulting Co., Ltd., Japan www.eltechs.co.jp Tel No. +81 (47) 490-1010 Fax No. +81 (47) 490-1011
More informationInstallation of USB Virtual COM. Version 1.02
Installation of USB Virtual COM Version 1.02 RELEASE NOTES Version Date Notes 1.02 May 13, 2014 Modified: Install USB Virtual COM Drivers files on CD updated 1.01 Dec. 10, 2009 Supports driver for Windows
More informationConnecting your Omega/BetaPAT PLUS to a PC via a USB
Connecting your Omega/BetaPAT PLUS to a PC via a USB Install software Windows XP and below Insert the disc into your computers disc drive and run through the setup wizard. Windows Vista & 7 1. Insert the
More informationRimage 2000i Knowledge Base
Important! This document is designed to be viewed online. It contains links to several online processes and procedures, which are not available in the printed version. August 3, 2007 Rimage 2007 Table
More informationImage Backup and Recovery Procedures
Image Backup and Recovery Procedures Thank you for purchasing a Fujitsu computer. Fujitsu is committed to bringing you the best computing experience with your new system. It is very important that you
More informationUSB 2.0 Video Capture Device Quick Installation Guide
USB 2.0 Video Capture Device Quick Installation Guide Introducing the USB 2.0 Video Capture The USB 2.0 Video Capture Device easily captures video from VHS or any external source and record to DVD. Features
More informationMAXTOR ONETOUCH III MINI EDITION FOR WINDOWS VISTA. User s Guide
MAXTOR ONETOUCH III MINI EDITION FOR WINDOWS VISTA User s Guide MAXTOR ONETOUCH III MINI EDITION WINDOWS VISTA USER S GUIDE Contents Windows Installation Introduction...................................................
More informationSOFTWARE INSTALLATION AND USB/i.LINK CONNECTION GUIDE
SOFTWARE INSTALLATION AND USB/i.LINK CONNECTION GUIDE ENGLISH LYT1155-001A COPYRIGHT 2003 VICTOR COMPANY OF JAPAN, LTD. M3D8 Printed in Japan 0403-FO-ID-VP This document explains the basic information
More informationInternet Setup Manual for Windows 95/98
Step 1 On your Windows 95/ 98 desktop, click on Start, then click on Settings, then click on Control Panel. Step 2 Inside of the Control Panel, find the icon labeled Network. Now double-click on the Network
More informationOMEGA STUDIO SOFTWARE INSTALLATION GUIDE
OMEGA STUDIO SOFTWARE INSTALLATION GUIDE USB Device Drivers, Cubase LE Setup, and Pantheon Reverb Plug-in for Windows XP Cubase LE Setup and Pantheon Reverb Plug-in for Mac OS X Congratulations on your
More informationDSG SoftPhone & USB Phone Series User Guide
DSG SoftPhone & USB Phone Series User Guide Table of Contents Overview Before You Start Installation Step 1. Installing DSG SoftPhone Step 2. Installing USB Phone Step 3. System Check First Time Use Step
More informationPre-Installation: Personal Storage 3100 Installation Guide. Hardware and Operating System Requirements for Windows PC
Pre-Installation: Thank You Thank you for selecting a Maxtor Personal Storage product. Please follow these instructions to take full advantage of its features. Handling Precautions If these handling precautions
More information3. USB DRIVER. 3-1. Installation of USB driver. 3-1-1. Driver for Infinity SD Data Logger. INFINITY Series Acquisition Tools Manual
3. USB DRIVER 3-1. Installation of USB driver Before you launch this software, the driver should be once surely registered. Access between the instrument and a PC through the USB cable supplied by us as
More informationBluetooth Wireless USB Adapter. User Manual (GBU221/321)
Bluetooth Wireless USB Adapter User Manual (GBU221/321) 1 2007 IOGEAR. All Rights Reserved. M0345 IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks of IOGEAR, Inc. Microsoft
More informationOptional Bluetooth Firmware Update HW05-SW01.27.20 Enables Bluetooth AVRCP control and metadata display for iphone 5 and ios 6 users.
January 29, 2013 Optional Bluetooth Firmware Update HW05-SW01.27.20 Enables Bluetooth AVRCP control and metadata display for iphone 5 and ios 6 users. IMPORTANT Please download and print these Bluetooth
More informationJROTC CURRICULUM MANAGER INSTALLATION GUIDE VERSION 2.0
JROTC CURRICULUM MANAGER INSTALLATION GUIDE VERSION 2.0 Updated November 24, 2014 Table of Contents Curriculum Manager Installation Instructions... 6 Set-up Steps... 6 Step 1... 7 Pre-Install Instructions...
More informationStart Here USB. (802.11) (Ethernet)
Start Here 1 USB 802.11 Ethernet USB cable users: Do not connect the USB cable until Section A. USB A USB Wireless (802.11) or wired (Ethernet) network users : you must follow the instructions in this
More informationBluetooth Wireless USB Adapter. User Manual (GBU211 / GBU311)
Bluetooth Wireless USB Adapter User Manual (GBU211 / GBU311) Welcome Thank you for purchasing one of the most feature-rich Bluetooth to USB adapters available. IOGEAR s Bluetooth to USB adapters are first-rate
More informationWireless Keyboard & Optical Mouse. User Manual
Wireless Keyboard & Optical Mouse User Manual Table of Contents Introduction... 1 Software Compatibility... 1 Product Features... 2 Quick Installation Setup for PS/2 Connections (PC-only)... 5 Quick Installation
More information2-Port RS232 Serial PCI with 16950 UART Quick Installation Guide
2-Port RS232 Serial PCI with 16950 UART Quick Installation Guide Introduction The 2-Port RS232 Serial PCI with 16950 UART high-speed serial card provides two RS-232 9-pin serial ports. Key Features and
More informationWINDOWS 64-BIT INSTALLATION NOTES ORACLE VIRTUALBOX Micro Planner X-Pert V3.5.1 Digital Download Edition
WINDOWS 64-BIT INSTALLATION NOTES ORACLE VIRTUALBOX Micro Planner X-Pert V3.5.1 Digital Download Edition THIS DOCUMENT CONTAINS IMPORTANT INFORMATION REGARDING THE INSTALLATION AND USE OF THIS SOFTWARE.
More informationThe Rush 24/7 Podcast for itunes 9
The Rush 24/7 Podcast for itunes 9 System Requirements In order to run the Rush 24/7 Podcast for itunes 9, please see the system requirements here: http://www.apple.com/itunes/download/ Initial Setup of
More informationKI6501 Data Manager. Software User Manual
KI6501 Data Manager Software User Manual CONTENTS 1. Installation of USB Virtual COM Port driver software... 2 2. Installation of KI6501 Manager Software... 2 3. Connecting KI6501 to PC (Personal Computer)
More informationivms-4200 Client Software Quick Start Guide
ivms-4200 Client Software Quick Start Guide Notices The information in this documentation is subject to change without notice and does not represent any commitment on behalf of HIKVISION. HIKVISION disclaims
More informationN150 Wireless Micro USB Adapter WNA1000M Installation Guide
N150 Wireless Micro USB Adapter WNA1000M Installation Guide This guide explains Express installation with the NETGEAR Smart Wizard and the Standalone Windows Driver installation. Note: For help with custom
More informationQuick Start Guide. DVR DS-7200HWI-SH Series DVR. www.hikvision.com. First Choice For Security Professionals
Quick Start Guide DVR DS-7300HWI-SH Series DVR DS-7200HWI-SH Series DVR NOTE: For more detailed information, refer to the User s Manual on the CD-ROM. You must use your PC or MAC to access the files. www.hikvision.com
More informationINF-USB2 and SI-USB Quick Start Guide
INF-USB2 and SI-USB Quick Start Guide Please follow these instructions carefully. DO NOT connect the INF-USB2 or SI-USB module to your computer before running the setup program. After running Setup and
More informationHUMAC2009 Software Installation Instructions for Windows XP and Vista
101 Tosca Drive Stoughton, MA 02072 USA (Phone) 781.297-2034 (FAX) 781.297-2039 (Web) www.csmisolutions.com HUMAC2009 Software Installation Instructions for Windows XP and Vista 1. Program Requirements...
More informationCloud Print Edition Quick Start Guide
WHAT S INSIDE Quick Start Guide xprintserver Power supply with regional adapters 3 Ethernet Cable Mounting Bracket & 2 Screws Rubber Feet (4) 1 BEFORE YOU BEGIN 1. If you intend to connect a USB printer
More informationInstalling the Gerber P2C Plotter USB Driver
Installing the Gerber P2C Plotter USB Driver 1 You can install a Gerber P2C plotter using a USB connection and communicate with it using compatible design software. The following procedures describe installing
More informationUSB 2.0 to DVI/VGA Pro Installation Guide
Introduction USB 2.0 to DVI/VGA Pro Installation Guide The USB 2.0 to DVI/VGA Pro adds DVI or VGA port to your USB enabled system. Key Features and Benefits Quickly adds a monitor, LCD or projector to
More informationDriver Installation (USB 2.0) and Software configuration manuals for Sopro Imaging, EagleSoft, and Dentrix Image 4.5
Driver Installation (USB 2.0) and Software configuration manuals for Sopro Imaging, EagleSoft, and Dentrix Image 4.5 124 Gaither Drive - Suite 140 - Mount Laurel, NJ 08054 USA Tel: 800-289-6367 Fax: 856-222-4726
More informationB.A.S.I.S. G and V Offline Setup Guide
B.A.S.I.S. G and V Offline Setup Guide Copyright 2006 Stanley Security Solutions, Inc. and Stanley Logistics, Inc. All rights reserved. Printed in the United States of America. Information in this document
More informationTable of Contents. 1. Overview... 3. 1.1 Materials Required. 3 1.2 System Requirements. 3 1.3 User Mode 3. 2. Installation Instructions..
Table of Contents 1. Overview..... 3 1.1 Materials Required. 3 1.2 System Requirements. 3 1.3 User Mode 3 2. Installation Instructions.. 4 2.1 Installing the On Call Diabetes Management Software. 4 2.2
More informationHow to Download Images Using Olympus Auto-Connect USB Cameras and Olympus Master
How to Download Images Using Olympus Auto-Connect USB Cameras and Olympus Master Introduction Auto-Connect USB is a feature that allows Olympus digital cameras to emulate a Hard disk drive when connected
More informationThe FlexiSchools Online Order Management System Installation Guide
The FlexiSchools Online Order Management System Installation Guide FlexiSchools May 2012 Page 1 of 18 Installation Pack Welcome to the FlexiSchools system. You will have received a disc containing: Sato
More informationCassette2CD Wizard User's Manual
Cassette2CD Wizard User's Manual Table of Contents 1. Installation Instructions a. Connecting tape-deck to the computer b. Installing the Software 2. Using Cassette2CD Wizard a. Setting up and Testing
More informationTaurus Super-S3 LCM. Dual-Bay RAID Storage Enclosure for two 3.5-inch Serial ATA Hard Drives. User Manual March 31, 2014 v1.2 www.akitio.
Dual-Bay RAID Storage Enclosure for two 3.5-inch Serial ATA Hard Drives User Manual March 31, 2014 v1.2 www.akitio.com EN Table of Contents Table of Contents 1 Introduction... 1 1.1 Technical Specifications...
More informationQuick Start Using DASYLab with your Measurement Computing USB device
Quick Start Using DASYLab with your Measurement Computing USB device Thank you for purchasing a USB data acquisition device from Measurement Computing Corporation (MCC). This Quick Start document contains
More informationUSB VoIP Phone Adapter. User s Manual
USB VoIP Phone Adapter User s Manual FCC Certifications This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 68 of the FCC Rules.
More informationGetting Started. rp5800, rp5700 and rp3000 Models
Getting Started rp5800, rp5700 and rp3000 Models Copyright 2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft, Windows, and Windows
More informationChapter 2 Installation
Installation Chapter 2 Installation This chapter will guide you through the installation of the Quartet Serial PCI. There are no jumpers or switches to set for this PCI Plug-n-Play board. 2-1 Hardware
More informationGetting Started User s Guide
Getting Started This short guide can help you to quickly start using Acronis True Image Home 2011. It describes just a few of the key features of Acronis True Image Home 2011. For detailed program information,
More information