TURIN: MILAN: RECRUITMENT TOUR: 1 OCTOBER 2012 TURIN 2 OCTOBER 2012 MILAN

Transcription

1 Rif EURES Systems Engineer Work in challenging projects and pioneering developments for renowned customers. A market leader in engineering, offers innovative solutions for nearly all areas of aerospace technology - European-wide. As a supplier, it was named an "EADS E2S Preferred Supplier for Engineering Services". Profile Required: Systems Engineer (m/f) - Southern or Northern Germany Analyze requirements documents Create interface specifications Cooperate in the creation of system architecture/design/specifications and supplier specifications Provide technical support for suppliers in the development phase Perform system tests Manage system verification and validation Create supporting approval documents Test, clarify, and process system changes Relevant career training is advantageous for quick familiarization with these subjects, but we also give suitable graduates an opportunity for developing expert competence by a modular job training Completed degree majoring in electrical or communications engineering, technical information systems, or comparable Experience in the development, integration, or testing of electronic systems Working knowledge of the theory and implementation of communications protocols, such as ARINC or AFDX, desirable Working knowledge of aviation-specific development standards (e.g. ABD) desirable Experience in requirement-based engineering (RBE) and configuration management (CM) advantageous Good working knowledge of German and English; French is advantageous You should be a team player and have good communication skills (spoken and written Other information: Guide of the German Labour Market and Job application Process ( CV- Cover letter-

2 Rif EURES SFDT A market leader in engineering offers innovative solutions for nearly all areas of aerospace technology - Europe-wide. As a supplier, it was named an "EADS E2S Preferred Supplier for Engineering Services". Profile Requested: Specialist (m/f) Fatigue and Damage Tolerance - Southern or Northern Germany - Fatigue and damage tolerance assessment during structure development and for repairs to metallic and composite aircraft structures - Performance of fatigue, crack growth and residual strength analyses to support calculation and sizing of primary structure and to assess repair solutions using computer programmes to ensure that the repair conforms to all relevant airworthiness requirements Degree in mechanical or aerospace engineering Profound knowledge in calculations of fatigue strength Experience in stress and fatigue analysis Aviation background is of help Good English and German language skills Structured, independent, accurate and solution-oriented way of working Good communication skills, ability to work in a team and sense of responsibility Your benefits: Permanent equal pay employment contract under the terms of the collective agreement with IG Metall Specific professional trainings Other information: Guide of the German Labour Market and Job application Process (CV- Cover letter-

3 Rif EURES Software Engineer A market leader in engineering offers innovative solutions for nearly all areas of aerospace technology - European-wide. As a supplier, we were named an "EADS E2S Preferred Supplier for Engineering Services". Profile Requested: Software Engineer (m/f) - Southern or Northern Germany Program and validate new software functions Maintain and continue development of the test environment Ensure overall functionality (non-regression testing) Debug and localize errors within the tested software Ensure configuration control (software, documentation) in accordance with project guidelines Plan and execute formal reviews and analyses Cooperate with internal software development and external partner companies Onsite integration and maintenance Completed degree majoring in computer science, electrical or aerospace engineering, or comparable career training Practical experience in software engineering Advantageous: Working knowledge of C/C++, Java, SVN, Assembler, Ada, DO-178B/C, DOORS, Eclipse Fluency in English, knowledge of German would be an advantage Strong technical, analytical, and holistic thinking skills Structured, independent, precise, and solution-oriented work style Team player

4 Rif EURES Design Engineer Aviation A market leader in engineering offers innovative solutions for nearly all areas of aerospace technology - European-wide. As a supplier, it was named an "EADS E2S Preferred Supplier for Engineering Services". Profile Requested: Design Engineer (m/f) Aviation - Southern or Northern Germany Design and engineer primary and secondary structures Test and validate design concepts Analyze production methods and assembly concepts at the subassembly level Generate manufacturing documentation and parts lists in accordance with applicable guidelines Participate in and plan meetings, including preparation of presentation documents Completed degree majoring in aerospace or mechanical engineering, or comparable career training Preferable: Initial practical experience in design and metal and composite fiber components in the aerospace field Advantageous: Working knowledge of CATIA V4/V5, CPD, PRIMES, Fibersim, Enovia VPM, and TAKSY Business fluency in German and English Strong technical, analytical, and holistic thinking skills Structured, independent, and solution-oriented work style Strong teamwork and communication skills Other information: Guide of the German Labour Market and Job application Process (CV- Cover letter-

5 Rif. EURES Avionics Engineer A market leader in engineering offers innovative solutions for nearly all areas of aerospace technology - European-wide. As a supplier, it was named an "EADS E2S Preferred Supplier for Engineering Services". Proflie Requested: Avionics Engineer (m/f) Southern or Northern Germany Analyze avionics system requirements and corresponding implementation Specify requirements for avionics components Define requirements for verification and performance of avionics system integration tests Program software for analyzing flight test data according to requirements Provide support in creating test procedures Create software documentation Completed degree majoring in computer science, electrical or aerospace engineering, or comparable career training Preferable: Initial experience with avionics systems in the aerospace industry Advantageous: Working knowledge of C/C++, Ada, Fortran, DOORS, Matlab, MS Office, UNIX, and Linux Fluency in English, knowledge of German would be an advantage Strong technical, analytical, and holistic thinking skills Structured, independent, precise, and solution-oriented work style Team player Other information: Guide of the German Labour Market and Job application Process (CV- Cover letter-

6 Rif. EURES Technical draftsman A market leader in engineering offers innovative solutions for nearly all areas of aerospace technology - European-wide. As a supplier it was named an "EADS E2S Preferred Supplier for Engineering Services". Profile Requested: Technical draftsman (m/f) Southern or Northern Germany Design and engineer to meet aesthetic and technical requirements using a 3D CAD program Create component, sub-assembly, assembly, and installation drawings Create documentation such as technical drawings and presentations Documentation (such as creating parts lists) Data migration from various 3D CAD programs Communication with customers and technical departments Targeted seminars Individualised practical coaching Completed career training program as a technical product designer / technical draftsman Initial career experience in aviation (desirable) Spatial reasoning skills Experience in creating drawings Good working knowledge of CAD-Tool, CATIA V5 is desirable Good working knowledge of MS Office Good working knowledge of English (desirable) Very good teamwork and communication skills Willingness to learn, dedication, and reliability Other information: Guide of the German Labour Market and Job application Process (CV- Cover letter-

7 Rif. EURES Maintainability Engineer You will be a member of our team of maintainability engineers working on all types of aircraft. You will focus your work on a wide spectrum of challenging tasks such as: Maintainability Engineer (m/f), Bremen and Hamburg (Germany) - Handling analysis: Installation/ removal of devices - Verification and changes of Installation and Maintenance documents - DMU- Analysis - Engineering degree in Mechanical Engineering or Aerospace Engineering - Experience in working in the aerospace industry - Proficient in MS Office - Knowledge of Catia V5 and D-Vise would be a plus - Structured working method and ability to communicate - Good command of the English and German language The Offer Apart from professional challenges throughout daily work, we also offer you the prospect of internal mobility within an international company. If you like to participate in the further development of the worldwide most ambitious projects of our customers and if you are not afraid of high technological expectations, you will find this position with us.

8 Rif. EURES EEAECS You will be a member of our team of electrical engineers for air conditioning systems working on all types of aircraft. You will focus your work on a wide spectrum of challenging tasks such as Is looking for: Electrical Engineer for Aircraft Environmental Controls System (m/f), Hamburg (Germany) Job description - Electrical definition of the environmental controls system (ATA21), its controller, components and wiring in aircraft - Wiring definition (electric power, routing, connectors, segregation) - Definition of the electric load of the system components - Specification of interfaces with electrical power supply in an aircraft (ATA24) - Hard- and software analysis of the system and the components on PCB, equipment and system level with respect to the certification process - Customization of the Air Conditioning System - Impact analysis of the customization and modification on the system - Definition and implementation of self test functions (BITE, ISMD, MIMOS) and system communication (ISCD, Albatros) - Engineering degree in electrical engineering, automation engineering or mechatronics - Knowledge of designing electrical systems - Knowledge of power electronics - Knowledge of electrical integration of aircraft systems would be a plus - Deductive reasoning and good communication skills - Work independently - Good command of the English language, German would be a plus The Offer Apart from professional challenges throughout daily work, we also offer you the prospect of internal mobility within an international company. If you like to participate in the further development of the worldwide most ambitious projects of our customers and if you are not afraid of high technological expectations, you will find this position with us. Other information: Guide of the German Labour Market and Job application Process (CV- Cover letter-

9 Rif. EURES SEH To provide on-site engineering support as an engineer for hydraulic systems you actively participate in the development of hydraulic systems for a special aircraft program. Is looking for: Systems-Engineer Hydraulics (m/f) in Bremen (Germany) Job description - Update of detailed specification of systems / equipments - Participation in supplier reviews for steering and monitoring of design - Update of documents - Simulation of dynamic and thermal behavior of equipment and system - Engineering Degree in Mechanical or Aerospace Engineering or similar - First experience in designing complex aeronautical systems - Experience in simulation - A team player, able to work independently - Proactivity - Deductive reasoning and good communication skills - A very good command of the English language, German would be a plus The Offer Apart from professional challenges throughout daily work, we also offer you the prospect of internal mobility within an international company. If you like to participate in the further development of the worldwide most ambitious projects of our customers and if you are not afraid of high technological expectations, you will find this position with us.

10 Rif. EURES Project Coordinator Germany s biggest engineering service provider and preferred supplier of the EADS for engineering services is looking for: Project Coordinator (m/f) for a Premium Car Manufacturer Branches: Automotive Location: Munich Autonomous coordination of project management and interface management Planning, moderation and documentation of coordination meetings of all involved departments Drafting and tracking of the project plan Realization of plausibility checks for results and controlling Assessment of control factors of the project Development of cross-divisional expertise Targeted seminars Development of expert competence Permanent IG Metall labour contract with an expected gross annual salary between and University degree (mechanical engineering, automotive engineering, industrial engineering) Working experience in the automotive sector with special regard to car body sector and project management Fluent oral German skills and fluent written and oral English skills

11 Rif. EURES Logistics Planner Germany s biggest engineering service provider and preferred supplier of the EADS for engineering services is looking for: Planner (m/f) for a Premium Car Manufacturer Branches: Automotive Location: Munich Planning, optimization and realization of concepts for material flow and supply Integration of new products and processes into existing structures Application of strategic subjects (logistics strategy, technical reference systems, standards, customer-oriented sales and production process) Purchasing, installation and bringing into service of storages and the necessary facilities Assessment of cost effectiveness, area and feasibility Processing of potential assessments with regard to the long-term development of the sites Development of cross-divisional expertise Targeted seminars Development of expert competence Permanent IG Metall labour contract with an expected gross annual salary between and University degree (mechanical engineering, logistics, industrial engineering) Working experience in the automotive sector Fluent oral German skills and fluent written and oral English skills

12 Rif. EURES SESI Germany s biggest engineering service provider and preferred supplier of the EADS for engineering services is looking for: System Engineer (m/f) System integration Branches: Aerospace, Automotive, Medical Engineering, Commercial Vehicles Location: Munich Preparation and examination of incoming single components as well as mechanical, functional and electrical integration of subsystems to a complete system Requirements analysis to identify the required testing work environment and acquisition of standard measurement equipment and tools Definition of mechanical auxiliary material for integration and furthermore integration and construction of the required testing work environment with hardware and software Definition and development of testing and acceptance procedures for the checkable systems and their approval Documentation of testing results and verification of system requirements Development of cross-divisional expertise Targeted seminars Permanent IG Metall labour contract with an expected gross annual salary between and University degree Working experience as junior professional, professional or senior professional Fluent written and oral English skills; German skills are highly desirable

13 Rif. EURES ESM Germany s biggest engineering service provider and preferred supplier of the EADS for engineering services is looking for: Engineer (m/f) Software Modelling Branches: Aerospace, Automotive, Medical Engineering, Commercial Vehicles Location: Munich Development of security relevant software for aviation, automotive and medical technology Mentoring of the complete software life cycle ranging from requirement analyses, draft, modelling and implementation to testing the software in hardware in the loop devices Utilisation of appropriate development tools such as DOORS, Matlab/Simulink and C Development of cross-divisional expertise Targeted seminars Performance monitoring Permanent IG Metall labour contract with an expected gross annual salary between and University degree Working experience as junior professional, professional or senior professional Fluent oral German skills and fluent written and oral English skills

14 Rif. EURES SDES Germany s biggest engineering service provider and preferred supplier of the EADS for engineering services is looking for: Software-Developer (m/f) Embedded Software Branches: Aerospace, Automotive, Medical Engineering Location: Munich Development, automation and application of software testing methods for control units (C, C++) Static and dynamic software module tests, integration as well as and system tests Application and development of embedded software solutions in the test range of complex systems Effective error detection and error correction by using applicable methods for early error prevention Implementation of software quality processes and tools Development of cross-divisional expertise Talent management programmes Targeted seminars Permanent IG Metall labour contract with an expected gross annual salary between and University degree Working experience as junior professional, professional or senior professional Fluent oral German skills and fluent written and oral English skills

15 Rif. EURES Engineer Germany s biggest engineering service provider and preferred supplier of the EADS for engineering services is looking for: Engineer (m/f) Branches: Aerospace, Automotive, Medical Engineering, Commercial Vehicles Location: Munich Realization of development-related examinations of components Planning and conduction of experiments; validation of experimental results as well as record keeping and administration of experimental and release reports Conduction of apparatus and system analyses at customers and users Calibration of measurement systems and automation of experimental progress (programming with LabVIEW, Diadem) Development of cross-divisional expertise Targeted seminars Modular job training Permanent IG Metall labour contract with an expected gross annual salary between and University degree (Master and/or Bachelors degree) Working experience as junior professional, professional or senior professional Fluent written and oral English skills; German skills both written and spoken are required

16 Rif. EURES Quality Specialist (m/f) Germany s biggest engineering service provider and preferred supplier of the EADS for engineering services is looking for: Quality Specialist (m/f) for a Premium Car Manufacturer Branches: Automotive Location: Munich Adjustment and compliance of quality targets of factories with regard to technical planning in car body sector Supervision of problem management Supporting the problem-solving team Tracking the quality schedule and multi project management Developing audit plans and performing internal audits Participating in inspections and value-added production system events Application of complex Q-methods Development of cross-divisional expertise Targeted seminars Development of expert competence Permanent IG Metall labour contract with an expected gross annual salary between and University degree (mechanical engineering, automotive engineering, industrial engineering, manufacturing technique) Working experience in the automotive sector Fluent oral German skills and fluent written and oral English skills

17 Rif. EURES Systems TE - Young German company which distinguishes itself by means of excellent know-how in the fields of telecommunications and vehicle telematics. The company's disposes of a versatile portfolio of consultancy and application development services. It is particularly engaged in the automotive domain and the telecommunication sector. The basis of all solutions constitutes its own developed Advanced Telematics Platform (ATP). Currently, the company is looking for: System Test Engineers (m/f) experienced professional or graduate), who are supposed to support the system test, test automation and system integration of in-vehicle infotainment systems for the OEM market. - Analysis and testing of the equipment locally at our lab - On-site work assignments at our customers premises - Automated tests and qualification. Qualification requirements: - Degree in electrical engineering, computer science, applied computational linguistics, text- and media technology etc. - Experiences in test automation - Ability to cope with pressure, capacity for teamwork, flexibility, learning aptitude High affinity with the subjects of modern communication and infotainment systems - Highly proficient in English (knowledge of German desirable) - Knowledge of the Arabic, Chinese, Japanese language are advantageous. - Possession of a full clean driving license Timeframe: Starting Operating location: Stuttgart region

18 Rif. EURES Systems Engineer For a renowned company within the aerospace industry in Bremen (Lower Saxony, Germany), we are seeking a: Systems Engineer (m/f) for an immediate start or upon availability - Cooperation in the further development of electronic and electromechanical components for a cargo loading system - Definition, planning and steering of integration- and test activities - Validation of development documents - Validation of test results - Engineering Degree in Electronics, Information Technology or Telecommunications - Experience as Systems Engineer in the afore-mentioned areas of the aerospace industry - Good knowledge of technical English - MS Office very good - Use of modern technologies in HW and SW is a matter of course - Up-to-date specialized knowledge of different technologies - Work independently, proactivity - Team player and willingness to work in international teams The Offer Apart from professional challenges throughout daily work, we also offer you the prospect of internal mobility within an international company. If you like to participate in the further development of the worldwide most ambitious projects of our customers and if you are not afraid of high technological expectations, you will find this position with us.

19 Rif. EURES Project Leader For a renowned company within the aerospace industry in Buxtehude (Germany), we are seeking a: Project Leader (m/f) for an immediate start as part of a long-term collaboration. - Carry out a development project independently within the aviation industry - Monitoring of suppliers and sub-contractors from first customer contact to delivery - of components and systems - Surveillance of the compliance of manufacturers delivery obligations according to agreed schedule - Reporting of projects Close collaboration with the customer - Electronics Engineer or Information Technology graduated - Professional experience as project leader in afore-mentioned areas within the aerospace industry - Very good technical English skills - Willingness to travel - Very good MS Office skills (Word, Excel, PowerPoint, MS Project) - Updated specific knowledge in regards to different technologies in Design, Test and Integration - Independent and structural work method The Offer Apart from professional challenges throughout daily work, we also offer you the prospect of internal mobility within an international company. If you like to participate in the further development of the worldwide most ambitious projects of our customers and if you are not afraid of high technological expectations, you will find this position with us.

20 Rif. EURES TES For a renowned company within the aerospace industry in Baden-Württemberg (Germany), we are seeking a: Test Engineer Satellites (m/f) as of or earlier as part of a long-term collaboration. - Installation of complex measuring stations according to plan - Calibration of measuring stations - Realization of measures according to test specifications - Evaluation of test results Documentation - Aerospace Engineering or Electrical Engineering, Telecommunications Engineering or Mechanical Engineering graduated OR other field-related vocational training (i.e. Engineer, Technician) - Testing experience - First experience in aerospace desirable - Knowledge of telecommunication and communication systems - Experience in the installation and calibration of complex measuring stations according to plan - Experience in high-frequency measurement techniques and knowledge of relevant measurement devices - Very good English skills (written and oral) - Proficient MS Office skills (Word, Excel ) - Willingness to travel, ability to work shifts, stays abroad - Thorough working method The Offer Apart from professional challenges throughout daily work, we also offer you the prospect of internal mobility within an international company. If you like to participate in the further development of the worldwide most ambitious projects of our customers and if you are not afraid of high technological expectations, you will find this position with us.

21 Rif. EURES DEA Munich German enterprise, leading European specialist in critical systems in the High-Tech sector (aerospace, defence, automotive, energy), is looking for Italians engineers: Development Engineer - Aeronautics (m/f) Job Drescription - Project-related accountability of tasks as a Consultant at our local customers in the aeronautic industry - Experience with software projects in avionic - Experience in developing a safety-critical software for the Aviation-Standard DO Testing of the developed software at the HiL-test bench - Implementation of the Control and Chance Management Requirements University degree in aerospace or comparable degree At least one year of relevant work experience or internships in various field of the Aeronautic industry Experience in the following areas: o C/C++ o Matlab o Simulink o Ada o Pascal o UNIX o Linux o Windows Business fluent in English, German preferable

22 Rif. EURES EQAA Munich German enterprise, leading European specialist in critical systems in the High-Tech sector (aerospace, defence, automotive, energy), is looking for Italians engineers: Engineer Quality Assurance/ Automotive (m/f) Job Description - Implementation of the quality pre-planning process - Supplier liaison regarding quality issues - Processing of complaints and problem solutions using 8D process - Participation in feasibility study, risk analysis, specification creations and the implementation of the necessary processes - Coordination of activities for the development and compilation of documents for process and product release Requirements - University degree in mechanical engineering, industrial engineering, automotive engineering - At least five year of relevant work experience in the field of automotive - Experience in the following areas: o APQP/QVP o Q-methods, QM-Systems o SAP beneficial - Business fluent in English, German preferable - Willingness to travel

23 Rif. EURES SHDA Munich German enterprise, leading European specialist in critical systems in the High-Tech sector (aerospace, defence, automotive, energy), is looking for Italians engineers: Software/ Hardware Developer - Automotive (m/f) Job Description: - Project-related accountability of tasks as a Consultant at our local customers in the automotive industry - Development of embedded systems - Preparation of specifications, architecture, system design - Simulation, implementation - Coordination of the interface with customers, internal and external development partners - Integration and testing of functional models - University degree in automotive engineering, electrical engineering, mechatronics, physics, aeronautics, space - At least one year of relevant work experience or internships in various field of the automotive industry - Experience in at least one of the following areas: o System engineering (hardware /software systems) o Requirements engineering, in particular the creation of system specifications and design documents for the entire project cycle (DOORS) o Software Integration o Software Quality o Configuration Management o HMI/ Navigation System Development (C, C++, Java) o Software Architecture Business fluent in English, German preferable For application: Send as a PDF or Word file, only in English CV, Cover letter, Academic certificates incl.

24 Rif. EURES STEA Munich German enterprise, leading European specialist in critical systems in the High-Tech sector (aerospace, defence, automotive, energy), is looking for Italians engineers: Software Test Engineer Automotive (m/f) Job Description - Implementation and documentation of software tests and software integration tests - Participation in system integration tests, test planning process - Assist with development of the process design for the testing management and configuration management Requirements : - University degree computer engineering, computer science or equivalent - Experience in the following areas: o Embedded software testing o ISTQB Certified o SPICE o ISO26262 o IEC61508 beneficial Business fluent in English, German preferable

25 10 ENGINEERS (Electrical, Mechanical, Computer) Description: German enterprise is looking for Italians engineers; it's the world s leading producer of engineering tools for developing electronic control units (ECUs) and mechatronic systems. It produces tools used in aerospace, drives technology, medical engineering, industrial automation. Requirements : Diploma in Electrical engineering, Mechanical engineering, or Computer engineering (Bachelor's Degree, Master's Degree, or PhD) Very good proficiency in English Good proficiency in obj ect-oriented software development Good proficiency the programming languages C# or C++, as well as proficiency in the programming language C Knowledge and experience in one or several of the following areas is advantageous, but not required: Proficiency in programming embedded systems and/or real-time systems Proficiency in control engineering, measurement engineering and the functionalities of electronic control units Practical experience in working with oscilloscopes and other electronic measuring devices Developing with AUTOSAR Practical experience with MATLAB / Simulink Proficiency in the Python scripting language Proficiency in using the.net framework Experience in working with UML Software engineering, such as OOA, OOD and UML Automotive bus systems, such as CAN, LIN and FlexRay Experience in test methods, testing tools, and quality management Qualification as an ISTQB Certified Tester It provides: Active support in finding accommodations in Paderborn Active support in attaining German language proficiency (if applicable, also for the spouse or partner) A solid training concept based on mentors An innovative, future-oriented product range Multifaceted, diverse tasks within proj ect teams An excellent partnership-based work climate A high level of personal responsibility Contract: Permanent, full time (40H. per week) An above-average, performance-oriented salary (13- month salary with an optional company performance bonus) Work location: Paderborn (Germany). For application: Send as a PDF or Word file, only in English CV, Cover letter, Academic certificates incl.