How to deploy Lync 2013 client using SCCM
|
|
- Silvia Lawrence
- 7 years ago
- Views:
Transcription
1 In this doc we will see how to deploy Lync 2013 client using SCCM. There are two versions of the Lync 2013 client available, Lync Basic 2013 and Lync Lync Basic 2013 provides all the basic functionality that s available in the full version of Lync 2013 except some of these. The Lync Basic client includes enhanced presence, contacts, instant messaging (IM), Lync meetings, and basic voice functionality. Features not supported in Lync Basic include multiparty video, OneNote integration, virtual desktop infrastructure (VDI) support, skill search, recording, Enterprise Voice features, and advanced call handling. To compare the features and capabilities of Lync 2013 clients you can read Client comparison tables for Lync Server 2013 Where can I download the Lync 2013 clients? Lync Basic 2013 is available on the Microsoft Download Center and comes in two versions: Microsoft Lync Basic 2013 (64 Bit) Microsoft Lync Basic 2013 (32 Bit) Lync 2013 is available via the Microsoft Volume Licensing Service Center for customers with a Volume Licensing agreement. You can download the Lync 2013 client from VLSC or you could use OCT to customize the Lync 2013 which comes with Office To customize client installation in Lync 2013, you can click on this link. So my Lync configuration file consists of few lines of code. I have saved this file with name config-pd.xml inside the folder lync.ww. You can download the configuration file here. As an example, in this post we will see Lync bit client deployment. You could follow the same procedure to deploy Lync bit client deployment. How to deploy Lync 2013 client using SCCM Copy the Lync setup folder to the sources folder or any shared folder on the ConfigMgr server. Launch the Configuration Manager console, click Software Library, under Application Management right click Applications and click Create Application. Choose Manually specify the application information and click Next.
2 Specify some information about the application such as Name, Publisher etc. Click Next.
3 You can specify more information about the application here, the information specified here will be seen by user in the Application Catalog. Click Next.
4 We will now configure the Deployment Type for Lync 2013 client setup. Click on Add.
5 Let the deployment type be a Windows Installer (*.msi), choose Manually specify the deployment type information. Click Next.
6 Specify some information about this deployment type and click Next.
7 For the Content Location, provide the path where the Lync 2013 files are present. The next step is to specify install and uninstall command. Specify the Installation Program and Uninstall Program as shown in the below screenshot. Click Next.
8 On the Detection Rule window, choose Setting Type as File System. Under Specify the file or folder to detect the app, set the following Type File Path %ProgramFiles%>Microsoft Office >Office15 File or Folder name lync.exe Click OK and then Next.
9 Click on Add Clause. On the Detection Rule window, choose Setting Type as Registry. Under Specify the registry key or value, set the following Hive HKEY_LOCAL_MACHINE key SOFTWARE>Microsoft>Office>15.0>Registration>{0EA305CE-B708-4D D636AB0F1A4D}>ProductName Value Microsoft Lync 2013 Click OK and then Next.
10 In the above steps we have added 2 rules to detect the presence of the app. One of these rules to detect the app is also fine. So under Connector field change And operator to Or. Click Next.
11 Selection the Installation behavior as Install for system if resource is device; otherwise install for user, Logon requirement as Whether or not a user is logged on and Installation program visibility to Hidden. Click Next and complete the remaining steps.
12 Click Close.
13 Right click the Lync application and click on Distribute Content. Add the Distribution Point and complete the wizard. After you distribute the application to DP, right click on the Lync application and click on Deploy. Choose the Collection where this application is to be deployed and click Next. Under Deployment settings, set the Action as Install and Purpose as Available. Click on Next and complete the wizard. After few minutes the Lync 2013 app can be seen in the Software Center under Available Software. Select the app and click on Install Selected. The app is downloaded from the DP and installed.
14 The Lync 2013 client is installed successfully. The Lync 2013 client has been installed on the computer. If you want to what s going in the background during the client installation, you can open the AppEnforce.log file on the client computer using CM Trace tool. If the app fails to install you can check this file for troubleshooting purpose.
15
How To Deploy Lync 2010 Client Using SCCM 2012 R2
prajwaldesai.com http://prajwaldesai.com/how-to-deploy-lync-2010-client-using-sccm-2012-r2/ How To Deploy Lync 2010 Client Using SCCM 2012 R2 Prajwal Desai In this post we will see how to deploy Lync 2010
More informationHow To Deploy Office 2016 With Office 2016 Deployment Tool
How to deploy Office 2016 using SCCM 2012 R2 In this article we will see how to deploy Office 2016 using SCCM 2012 R2. Along with Office 2016, Microsoft has released office 2016 deployment tool. The Office
More informationThings to consider before you do an In-place upgrade to Windows 10. Setup Info. In-place upgrade to Windows 10 Enterprise with SCCM
In this doc we will see the steps for In-place upgrade to Windows 10 Enterprise with SCCM. Most of the Organizations today are running Windows 7 on their computers. Looking at the stability and features
More informationHow To Deploy Microsoft Office 2013 Using SCCM 2012 R2
prajwaldesai.com http://prajwaldesai.com/how-to-deploy-microsoft-office-2013-using-sccm-2012-r2/ How To Deploy Microsoft Office 2013 Using SCCM 2012 R2 Prajwal Desai In this post we will see how to deploy
More informationHow to deploy Internet Explorer 11 using SCCM 2012 R2
Home Exchange Lync System Center Windows OS Misc Faq Downloads Support About Me How to deploy Internet Explorer 11 using SCCM 2012 R2 In this post we will see how to deploy internet explorer 11 using SCCM
More informationHow to deploy fonts using Configuration Manager 2012 R2
In this post we will see steps on how to deploy fonts using Configuration Manager 2012 R2. If you have been tasked with deploying fonts using SCCM this post should help you. A font is a set of printable
More informationSystem Center 2012 R2 SP1 Configuration Manager & Microsoft Intune
2015 System Center 2012 R2 SP1 Configuration Manager & Microsoft Intune DEPLOYING MICROSOFT OFFICE 365 PROFESSIONAL PLUS RONNI PEDERSEN & HANS CHRISTIAN ANDERSEN RONNIPEDERSEN.COM Microsoft MVP: Enterprise
More informationApplication Deployment in SCCM 2012
Application Deployment in SCCM 2012 This document is explained about new concept of software distribution process in SCCM 2012 SP1.This time Microsoft have started coding part in order to accomplish distribution
More informationACTIVE DIRECTORY DEPLOYMENT
ACTIVE DIRECTORY DEPLOYMENT CASAS Technical Support 800.255.1036 2009 Comprehensive Adult Student Assessment Systems. All rights reserved. Version 031809 CONTENTS 1. INTRODUCTION... 1 1.1 LAN PREREQUISITES...
More informationConfiguration Manager 2012 R2 Hotfixes
prajwaldesai.com Configuration Manager 2012 R2 Hotfixes Author - Prajwal Desai Configuration Manager 2012 R2 Hotfixes Soon after the release of Microsoft System Center 2012 R2 Configuration Manager, Microsoft
More informationDeploying Applications To Users Using SCCM 2012 R2
Deploying Applications To Users Using SCCM 2012 R2 PrajwalDesai.Com Page 1 of 19 prajwaldesai.com Deploying Applications To Users Using SCCM 2012 R2 Prajwal Desai In this post we will look at the steps
More informationAutodesk Navisworks 2015 Service Pack 3
Autodesk Navisworks 2015 Service Pack 3 Thank you for downloading Autodesk Navisworks 2015 Service Pack 3. This readme contains the latest information about the installation and use of the service pack.
More information4cast Client Specification and Installation
4cast Client Specification and Installation Version 2015.00 10 November 2014 Innovative Solutions for Education Management www.drakelane.co.uk System requirements The client requires Administrative rights
More informationDeploying Endpoint Protection Updates Offline Using SCCM 2012 R2
Deploying Endpoint Protection Updates Offline Using SCCM 2012 R2PrajwalDesai.Com Page 1 of 18 prajwaldesai.com Deploying Endpoint Protection Updates Offline Using SCCM 2012 R2 Prajwal Desai Deploying Endpoint
More informationInstalling Windows Server Update Services (WSUS) on Windows Server 2012 R2 Essentials
Installing Windows Server Update Services (WSUS) on Windows Server 2012 R2 Essentials With Windows Server 2012 R2 Essentials in your business, it is important to centrally manage your workstations to ensure
More informationActive Directory Software Deployment
APPLICATION N0TE ST-0128 March 24, 2006 Product: Active Directory / PCM Deployment System version: ShoreTel 6 Active Directory Software Deployment Courtesy of: Dylan Moser with LANtelligence Inc. This
More informationBoot Images and Distribution Point Configuration For OSD In SCCM 2012 R2
1 prajwaldesai.com http://prajwaldesai.com/boot-images-distribution-point-configuration-osd-sccm-2012-r2/ Boot Images and Distribution Point Configuration For OSD In SCCM 2012 R2 Prajwal Desai Boot Images
More informationCapture Windows 7 Using SCCM 2012 R2
prajwaldesai.com http://prajwaldesai.com/capture-windows-7-using-sccm-2012-r2/ Capture Windows 7 Using SCCM 2012 R2 Prajwal Desai In this post we will see the steps to capture windows 7 using SCCM 2012
More information1. PART ONE: PREPARE OFFICE 365 PACKAGE 1.1. DOWNLOAD OFFICE 365
1. PART ONE: PREPARE OFFICE 365 PACKAGE 1.1. DOWNLOAD OFFICE 365 1. Download Office Deployment Tool for Click-to-Run : Link 2. Create five xml files inside downloaded folder Click-to-Run a. Download32.xml
More informationHow To Backup SCCM 2012 R2 Server
Page 1 of 11 prajwaldesai.com How To Backup SCCM 2012 R2 Server Prajwal Desai How To Backup SCCM 2012 R2 Server In this post we will see How To Backup SCCM 2012 R2 Server. If you have deployed SCCM 2012
More informationSCUtils WorkItem Scheduler Guide Solution for Microsoft System Center 2012 Service Manager
SCUtils WorkItem Scheduler Guide Solution for Microsoft System Center 2012 Service Manager Published: 6 th February 2015 Version: 1.1 Authors: Marat Kuanyshev Feedback: support@scutils.com Contents 1.
More informationMicrosoft Office 365 Microsoft Office 2013 Pro Plus for PC Installation and Activation Walkthrough
Microsoft Office 365 Microsoft Office 2013 Pro Plus for PC Installation and Activation Walkthrough Contents Introduction... 2 System Requirements... 2 Installing Microsoft Office 2013... 2 Manage/Deactivate
More informationPassTest. Bessere Qualität, bessere Dienstleistungen!
PassTest Bessere Qualität, bessere Dienstleistungen! Q&A Exam : 70-243 Title : Administering and Deploying System Center 2012 Configuration Manager Version : Demo 1 / 7 1.You recently migrated from System
More informationSCCM 2012. How to guide deploying SCCM Client, setting up SUP and SCEP. Hans Chr. Andersen
SCCM 2012 How to guide deploying SCCM Client, setting up SUP and SCEP Hans Chr. Andersen Contents What is Configuration Manager?... 2 Deploying SCCM Client... 3 Client push Installation... 3 SUP Installation...
More informationInstallation Steps on Desktop Clients
Installation Steps on Desktop Clients Table of Contents TABLE OF CONTENTS... 2 INSTALLATION STEPS FOR APPLE MAC BOOK... 3 XGEN PLUS INSTALLATION STEPS ON IPAD... 7 XGEN PLUS INSTALLATION STEPS ON MICROSOFT
More informationDeployment of Keepit for Windows
Deployment of Keepit for Windows Keepit A/S October 13, 2010 1 Introduction When deploying Keepit in larger setups with many desktops and servers, installing Keepit individually on each computer is cumbersome
More informationAutodesk Navisworks 2015 Service Pack 2
Autodesk Navisworks 2015 Service Pack 2 Thank you for downloading Autodesk Navisworks 2015 Service Pack 2. This readme contains the latest information about the installation and use of the service pack.
More informationAdministration Guide. . All right reserved. For more information about Specops Deploy and other Specops products, visit www.specopssoft.
. All right reserved. For more information about Specops Deploy and other Specops products, visit www.specopssoft.com Copyright and Trademarks Specops Deploy is a trademark owned by Specops Software. All
More informationSTATISTICA VERSION 9 STATISTICA ENTERPRISE INSTALLATION INSTRUCTIONS FOR USE WITH TERMINAL SERVER
Notes: STATISTICA VERSION 9 STATISTICA ENTERPRISE INSTALLATION INSTRUCTIONS FOR USE WITH TERMINAL SERVER 1. These instructions focus on installation on Windows Terminal Server (WTS), but are applicable
More informationMailStore Outlook Add-in Deployment
MailStore Outlook Add-in Deployment A MailStore Server installation deploys the MailStore Outlook Add-in as a Windows Installer package (MSI) that can be installed on client machines using software distribution.
More informationU S E R M A N U A L. Alcatel-Lucent. Click to call plugin for OmniPCX Enterprise. User manual. Alcatel-Lucent Enterprise Services Page 1/12
U S E R M A N U A L Alcatel-Lucent Click to call plugin for OmniPCX Enterprise User manual Alcatel-Lucent Enterprise Services Page 1/12 Index table 1 D o c u m e n t h i s t o r y 3 2 S c o p e 3 2.1 Overview...
More informationInstalling IDEA v8 Client Software on Citrix Server Environment
CASEWARE IDEA INC. Installing IDEA v8 Client Software on Citrix Server Environment Quick How to Guide This document describes the process of Installing Caseware IDEA v8 Client software on Citrix Server
More informationManaging Enterprise Devices and Apps using System Center Configuration Manager
Course 20696B: Managing Enterprise Devices and Apps using System Center Configuration Manager Course Details Course Outline Module 1: Managing Desktops and Devices in the Enterprise This module explains
More informationLicensing Windows and Microsoft Office for use on a Mac
Volume Licensing brief Licensing Windows and Microsoft Office for use on a Mac Table of Contents This brief applies to all Volume Licensing programs. Summary... 1 What s New in This Brief... 1 Details...
More informationLync Online. Basic Administration Guide
Basic Administration Guide Table of Contents Introduction... 3 Audience... 3 Document Location... 3 Special information... 3 1. Download and install Lync... 4 2. Set External Communications... 6 3. Modify
More informationNintex Workflow 2010 Installation Guide. Installation Guide. 2012 Nintex USA LLC, All rights reserved. Errors and omissions excepted.
Installation Guide 2012 Nintex USA LLC, All rights reserved. Errors and omissions excepted. Table of Contents 1. Installing Nintex Workflow 2010... 3 1.1 Run the Installer... 3 1.2 Deploy the Solution
More informationOption 1 Using the Undelete PushInstall Wizard.
Installing Undelete on Your Network Undelete can be installed in a variety of ways. If you are installing Undelete onto a single computer, no special actions are needed. Simply double-click the Undelete
More informationAdminToys Suite. Installation & Setup Guide
AdminToys Suite Installation & Setup Guide Copyright 2008-2009 Lovelysoft. All Rights Reserved. Information in this document is subject to change without prior notice. Certain names of program products
More informationHow to install and use the File Sharing Outlook Plugin
How to install and use the File Sharing Outlook Plugin Thank you for purchasing Green House Data File Sharing. This guide will show you how to install and configure the Outlook Plugin on your desktop.
More informationSystem Center 2012 R2 Configuration Manager Toolkit
prajwaldesai.com http://prajwaldesai.com/system-center-2012-r2-configuration-manager-toolkit/ System Center 2012 R2 Configuration Manager Toolkit Prajwal Desai System Center 2012 R2 Configuration Manager
More informationInstalling VinNOW Client Computers
Installing VinNOW Client Computers Please review this entire document prior to proceeding Client computers must use UNC path for database connection and can t be connected using a mapped network drive.
More informationeduc Office 365 email: Remove & create new Outlook profile
Published: 29/01/2015 If you have previously used Outlook the with the SCC/SWO service then once you have been moved into Office 365 your Outlook will need to contact the SCC/SWO servers one last time
More informationINTEGRATING VIRTUAL APPLICATION MANAGEMENT WITH APP-V 5 AND CONFIGURATION MANAGER 2012 SP1
INTEGRATING VIRTUAL APPLICATION MANAGEMENT WITH APP-V 5 AND CONFIGURATION MANAGER 2012 SP1 Introduction 2013 Microsoft Corporation. All rights reserved. This document is provided "as-is." Information and
More informationHow to Install and Setup IIS Server
How to Install and Setup IIS Server 2010/9/16 NVR is a Windows based video surveillance software that requires Microsoft IIS (Internet Information Services) to operate properly. If you already have your
More informationDeployment options for Avaya Communicator for Microsoft Lync with Lync Peer to Peer calling enabled
White Paper Deployment options for Avaya Communicator for Microsoft Lync with Lync Peer to Peer calling enabled Abstract This white paper describes the procedure to enable Microsoft peer to peer calling
More informationSecrets of Event Viewer for Active Directory Security Auditing Lepide Software
Secrets of Event Viewer for Active Directory Security Auditing Windows Event Viewer doesn t need any introduction to the IT Administrators. However, some of its hidden secrets, especially those related
More informationAbout This Guide... 4. Signature Manager Outlook Edition Overview... 5
Contents About This Guide... 4 Signature Manager Outlook Edition Overview... 5 How does it work?... 5 But That's Not All...... 6 And There's More...... 6 Licensing... 7 Licensing Information... 7 System
More informationWeb based training for field technicians can be arranged by calling 888-577-4919 These Documents are required for a successful install:
Software V NO. 1.7 Date 9/06 ROI Configuration Guide Before you begin: Note: It is important before beginning to review all installation documentation and to complete the ROI Network checklist for the
More informationPearl Echo Installation Checklist
Pearl Echo Installation Checklist Use this checklist to enter critical installation and setup information that will be required to install Pearl Echo in your network. For detailed deployment instructions
More informationInstallation Guide. Installing MYOB AccountRight in a Remote Desktop Services Environment
Installation Guide Installing MYOB AccountRight in a Remote Desktop Services Environment Table of Contents 1 Contents Page No. Contents Page No. Overview 2 1.0 Installing AccountRight on a Remote Desktop
More informationCreating and Issuing the Workstation Authentication Certificate Template on the Certification Authority
In this post we will see the steps for deploying the client certificate for windows computers. This post is a part of Deploy PKI Certificates for SCCM 2012 R2 Step by Step Guide. In the previous post we
More informationNagios XI Mass Deploy NSClient++
The Industry Standard in IT Infrastructure Monitoring Purpose This document describes how to mass deploy the NSClient++ agent. To accomplish this goal, we'll show how Microsoft's SCCM 2007 can be used
More informationCitrix EdgeSight for Load Testing Installation Guide. Citrix EdgeSight for Load Testing 3.5
Citrix EdgeSight for Load Testing Installation Guide Citrix EdgeSight for Load Testing 3.5 Copyright Use of the product documented in this guide is subject to your prior acceptance of the End User License
More informationMicrosoft Office 365 with MailDefender
(PC) for Microsoft Office 365 with MailDefender V1.0 Contents 1 Logging in to the Office 365 Portal... 3 1.1 Outlook Web Access Exchange & Lync... 3 1.2 Team Site SharePoint Online... 3 2 Configuring your
More informationNetIQ Advanced Authentication Framework - Citrix XenDesktop Plugin. Installation Guide. Version 5.1.0
NetIQ Advanced Authentication Framework - Citrix XenDesktop Plugin Installation Guide Version 5.1.0 Table of Contents 1 Table of Contents 2 Introduction 3 About This Document 3 System Requirements 4 Installing
More informationLync Training Outline
Setup Information - To conduct this training module on Lync 2011 (Mac), instructors will need a computer running the Lync 2011 client and the most recent Lync update (14.0.1 as of this writing) it is critical
More informationAdobe Acrobat 9 Deployment on Microsoft Windows Group Policy and the Active Directory service
Adobe Acrobat 9 Deployment on Microsoft Windows Group Policy and the Active Directory service white paper TABLE OF CONTENTS 1. Document overview......... 1 2. References............. 1 3. Product overview..........
More informationDistributing EmailSMS v2.0
Distributing EmailSMS v2.0 1) Requirements Windows 2000/XP and Outlook 2000, 2002 or 2003, Microsoft.NET Framework v 2).NET Framework V 1 Rollout Microsoft.NET Framework v1 needed to run EmailSMS v2.0.
More informationIBM Connections Plug-In for Microsoft Outlook Installation Help
IBM Connections Version 5 IBM Connections Plug-In for Microsoft Outlook Installation Help Edition Notice Note: Before using this information and the product it supports, read the information in "Notices."
More informationDeploying Windows 7 Using SCCM 2012 R2
prajwaldesai.com http://prajwaldesai.com/deploying-windows-7-using-sccm-2012-r2/ Deploying Windows 7 Using SCCM 2012 R2 Prajwal Desai In this post we will see the steps for deploying windows 7 using SCCM
More informationHosted Connecting Steps Client Installation Instructions
Hosted Connecting Steps Client Installation Instructions Thank you for purchasing B Squared s Hosted Connecting Steps System for Schools. Connecting Steps V4 currently requires you to install a client
More informationTECHNICAL DOCUMENTATION SPECOPS DEPLOY / APP 4.7 DOCUMENTATION
TECHNICAL DOCUMENTATION SPECOPS DEPLOY / APP 4.7 DOCUMENTATION Contents 1. Getting Started... 4 1.1 Specops Deploy Supported Configurations... 4 2. Specops Deploy and Active Directory...5 3. Specops Deploy
More informationInteract for Microsoft Office
Interact for Microsoft Office Installation and Setup Guide Perceptive Content Version: 7.0.x Written by: Product Knowledge, R&D Date: October 2014 2014 Perceptive Software. All rights reserved Perceptive
More informationServerView Integration Pack for Microsoft SCCM
User Guide - English FUJITSU Software ServerView Suite ServerView Integration Pack for Microsoft SCCM Edition July 2012 Comments Suggestions Corrections The User Documentation Department would like to
More informationStellar Phoenix Exchange Server Backup
Stellar Phoenix Exchange Server Backup Version 1.0 Installation Guide Introduction This is the first release of Stellar Phoenix Exchange Server Backup tool documentation. The contents will be updated periodically
More informationFor Splunk Universal Forwarder and Splunk Cloud
Quick Start Guide; For Splunk Universal Forwarder and Splunk Cloud This document details the procedure for manually installing Layer8 software agents, and forwarding data to an existing Splunk Enterprise
More informationApp-V Deploy and Publish
App-V Deploy and Publish Tools from TMurgent Technologies Updated Aug 5, 2010 Version 1.8 Introduction: The deployment of Virtual Applications in the simplest way possible, without the need for complicated
More informationStarWind iscsi SAN Software: Installing StarWind on Windows Server 2008 R2 Server Core
StarWind iscsi SAN Software: Installing StarWind on Windows Server 2008 R2 Server Core www.starwindsoftware.com Copyright 2008-2011. All rights reserved. COPYRIGHT Copyright 2008-2011. All rights reserved.
More informationConfiguration Manager 2012 R2 Client Installation
prajwaldesai.com http://prajwaldesai.com/configuration-manager-2012-r2-client-installation/ Configuration Manager 2012 R2 Client Installation Prajwal Desai In this post we will discuss about the Configuration
More informationComo configurar o IIS Server para ACTi NVR Enterprise
Como configurar o IIS Server para 20101/1/26 NVR is a Windows based video surveillance software that requires Microsoft IIS (Internet Information Services) 6 or above to operate properly. If you already
More informationCore Solutions of Microsoft Lync Server 2013
Course 20336B: Core Solutions of Microsoft Lync Server 2013 Course Details Course Outline Module 1: Architecture and Design Approach for Microsoft Lync Server 2013 This module will help you to plan and
More informationSCUt ils SmartAssign Guide Solution for Microsoft System Center 2012 Service Manager
SCUt ils SmartAssign Guide Solution for Microsoft System Center 2012 Service Manager Published: 06 th March 2015 Version: 1.1 Authors: Marat Kuanyshev Feedback: support@scutils.com Contents 1. Getting
More information1. Begin by opening XenCenter to manage the assigned XenServer.
Exercise 1 Microsoft Lync Optimization Overview In this exercise, you will see the difference made by the Lync Optimization Pack in the quality and stability of communications through Microsoft s Lync
More informationYubiKey PIV Deployment Guide
YubiKey PIV Deployment Guide Best Practices and Basic Setup YubiKey 4, YubiKey 4 Nano, YubiKey NEO, YubiKey NEO-n YubiKey PIV Deployment Guide 2016 Yubico. All rights reserved. Page 1 of 27 Copyright 2016
More informationNetWrix Password Manager. Quick Start Guide
NetWrix Password Manager Quick Start Guide Contents Overview... 3 Setup... 3 Deploying the Core Components... 3 System Requirements... 3 Installation... 4 Windows Server 2008 Notes... 4 Upgrade Path...
More informationDeep Freeze and Microsoft System Center Configuration Manager 2012 Integration
1 Deep Freeze and Microsoft System Center Configuration Manager 2012 Integration Technical Paper Last modified: May 2015 Web: www.faronics.com Email: sales@faronics.com Phone: 800-943-6422 or 604-637-3333
More informationTo add Citrix XenApp Client Setup for home PC/Office using the 32bit Windows client.
I. PURPOSE To add Citrix XenApp Client Setup for home PC/Office using the 32bit Windows client. II. POLICY: Network Request form must be sent from MIS staff to HCN Hardware Support requesting Citrix XenApp
More informationGlobal Image Management System For epad-vision. User Manual Version 1.10
Global Image Management System For epad-vision User Manual Version 1.10 May 27, 2015 Global Image Management System www.epadlink.com 1 Contents 1. Introduction 3 2. Initial Setup Requirements 3 3. GIMS-Server
More informationSCUP 2011 Installation and Configuration Guide
SCUP 2011 Installation and Configuration Guide Author: Kent Agerlund Create date: 09/06-2011 Change date: 14/06-201 Document version no.: 1.1 Written by Kent Agerlund, Coretech A/S Page 1 of 48 Document
More informationODBC Group Policy Settings
ODBC Group Policy Settings Indhold Introduction... 3 Computers involved... 3 Complete process... 3 ODBC 32/64 bit issues... 3 Process of setting up Registry settings for ODBC... 5 Registry files with settings...
More informationDeploying Dedicated Virtual Desktops in Hosted Environments
Deploying Dedicated Virtual Desktops in Hosted Environments Technical Preview Release Citrix XenDesktop 5.6 for Windows Server 2008 R2 Deploying Dedicated Desktops in Hosted Environments Hosted Server
More informationDeploying Dedicated Virtual Desktops in Hosted Environments
Deploying Dedicated Virtual Desktops in Hosted Environments Citrix XenDesktop 5.6 for Windows Server 2008 R2 Deploying Dedicated Desktops in Hosted Environments Hosted Server VDI enables CSPs to provide
More informationMicrosoft Dynamics GP. Business Analyzer
Microsoft Dynamics GP Business Analyzer April 5, 2013 Copyright Copyright 2013 Microsoft. All rights reserved. Limitation of liability This document is provided as-is. Information and views expressed in
More informationGetting Started Guide
Getting Started Guide www.exclaimer.com Contents About This Guide... 2 Signature Manager Overview... 3 How does it Work?... 3 But That s Not All... 4 And There s More... 4 Licensing... 5 Licensing Information...
More informationInstallation Guide. . All right reserved. For more information about Specops Inventory and other Specops products, visit www.specopssoft.
. All right reserved. For more information about Specops Inventory and other Specops products, visit www.specopssoft.com Copyright and Trademarks Specops Inventory is a trademark owned by Specops Software.
More informationHow to Install Multiple Monitoring Agents on a Microsoft Operating System. Version StoneGate Firewall/VPN 2.6 and SMC 3.2
How to Install Multiple Monitoring Agents on a Microsoft Operating System Version StoneGate Firewall/VPN 2.6 and SMC 3.2 INTRODUCTION This document provides detailed instructions for installing multiple
More informationEgress Switch Client Deployment Guide V4.x
Egress Switch Client Deployment Guide V4.x www.egress.com 2007-2013 Egress Software Technologies Ltd Table of Contents System Requirements... 4 Deployment Process... 4 Computer & User Based Policy Application...
More informationInstallation Manual (MSI Version)
Installation Manual (MSI Version) 1. SYSTEM REQUIREMENTS... 2 2. INSTALLATION INSTRUCTIONS... 2 2.1 REMOTE INSTALLATION USING GROUP POLICY... 2 2.1.1 Assigning Software...2 2.1.2 Publishing Software...2
More informationDeep Freeze and Microsoft System Center Configuration Manager 2012 Integration
Deep Freeze and Microsoft System Center Configuration Manager 2012 Integration Introduction This white paper explains how to integrate Microsoft System Center Configuration Manager with Deep Freeze. Requirements
More informationENABLE LOGON/LOGOFF AUDITING
Lepide Software LepideAuditor Suite ENABLE LOGON/LOGOFF AUDITING This document explains the steps required to enable the auditing of logon and logoff events for a domain. Table of Contents 1. Introduction...
More informationCORISECIO. Quick Installation Guide Open XML Gateway
Quick Installation Guide Open XML Gateway Content 1 FIRST STEPS... 3 2 INSTALLATION... 3 3 ADMINCONSOLE... 4 3.1 Initial Login... 4 3.1.1 Derby Configuration... 5 3.1.2 Password Change... 6 3.2 Logout...
More informationConfiguring an Etherspeak SIP Trunk in Microsoft Lync 2013
Configuring an Etherspeak SIP Trunk in Microsoft Lync 2013 This is to cover the steps needed for basic functionality to communicate with Etherspeak s SIP trunking service. Many environments are different
More informationTable of Contents. Table of Contents... 2. 1 Installation overview... 3. 2 Create a Group Policy Object and Deploy SmartAgentSetup MSI package...
1 Table of Contents Table of Contents... 2 1 Installation overview... 3 2 Create a Group Policy Object and Deploy SmartAgentSetup MSI package... 4 3 Change SmartAgentSetup Settings (Redeploy)... 11 4 Predefine
More informationCitrix EdgeSight for Load Testing Installation Guide. Citrix EdgeSight for Load Testing 3.8
Citrix EdgeSight for Load Testing Installation Guide Citrix EdgeSight for Load Testing 3.8 Copyright Use of the product documented in this guide is subject to your prior acceptance of the End User License
More informationAdministrator s Guide
Attachment Save for Exchange Administrator s Guide document version 1.8 MAPILab, December 2015 Table of contents Intro... 3 1. Product Overview... 4 2. Product Architecture and Basic Concepts... 4 3. System
More informationWindows Intune Walkthrough: Windows Phone 8 Management
Windows Intune Walkthrough: Windows Phone 8 Management This document will review all the necessary steps to setup and manage Windows Phone 8 using the Windows Intune service. Note: If you want to test
More informationHow To Deploy Software Updates Using SCCM 2012 R2
prajwaldesai.com http://prajwaldesai.com/deploy-software-updates-using-sccm-2012-r2/ How To Deploy Software Updates Using SCCM 2012 R2 Prajwal Desai In this post we will look at the steps on how to deploy
More informationCloudPortal Services Manager Version 11.0 CU2 Deployment Guide
CloudPortal Services Manager Version 11.0 CU2 Deployment Guide Contents Install... 3 Requirements... 3 Recommended deployment procedure... 3 Impacted Servers... 3 Prerequisites... 4 Upgrade the database...
More informationOneStop Reporting 3.7 Installation Guide. Updated: 2013-01-31
OneStop Reporting 3.7 Installation Guide Updated: 2013-01-31 Copyright OneStop Reporting AS www.onestopreporting.com Table of Contents System Requirements... 1 Obtaining the Software... 2 Obtaining Your
More information