Quick running actuator

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Quick running actuator"

Transcription

1 ACTATOR FOR DAMPERS Quick running actuator Actuator with rotation drive. 4 Nm 8 Nm For the application with Laboratory ventilation techniques Room ventilation techniques VAV Valves Page: Content: General overview quick running actuator,.,, 8 Nm + Actuator with digital drive Technical Data, quick running actuator,. Technical Data, quick running actuator, 8 Nm Technical Data, quick running actuator, Technical Data, quick running actuator, Technical Data, quick running actuator, 4 Nm Specific characteristics of continuous control Notes our way to Gruner G R N E R t h e f r i e n d l y a l t e r n a t i v e

2 GENERAL OVERVIEW: QICK RNNING ACTATORS = Standard = Optional Type Torque Running time (90 ) Control Tri-state On/Off Continuous control (0)...0 VDC or (0) ma Power supply 4 VAC/DC 30 VAC Options Digital Drive Feedback signal GAC Connection Page 7CS CS s 4 8 Nm 4 s 6 5 s 8 7CS-04-5 = Standard = Optional Type Torque Running time (90 ) Control Tri-state On/Off Continuous control (0)...0 VDC or (0) ma w/ 500Ω Power supply 4 VAC/DC 30 VAC Options Digital Drive Potentiometer Feedback signal Auxiliary switch GAC Connection Page s 0 7S s 0 7S S s s 7S S P s 7S S s Standard version with universal locking clamp and anti torsion bow. Also available with concentric form locking for shaft ( 8 mm) and flange fixing. All actuators dispose of manual override button, a mechanical limitation of the angle of rotation and setting button for the rotation direction (cw/ccw). Actuators according to S-standards available upon demand. 7S P s 4 7S s 4 7S S s 4 7S P s 6 7CS Nm 5 s 8 7CS-04-04

3 ACTATOR WITH DIGITAL DRIVE 3 The actuators with digital drive have no dip switches for setting the functions. All settings are done by the GIV (Windows PC or Handheld device) via PP-Bus: Available options: direction of rotation increasing of running time up to 0 s control signal = (0)...0 VDC control signal = (0) Ω feedback signal = (0)...0 VDC limitation of angle of rotation % of 95 - α Min correspond (0) VDC - α Max correspond 0 VDC digital control via α Const as variable for angular control Connection scheme BBNBKG /PP Angular control Windows software 00% 0% 0 /VDC GIV Connection PP-Bus LED's / PP FNCTION DATA CONNECT POWER LED RD E GN 3 / PP GIV-S B BN BK G - + AC 4V DC 4V / PP GIV-S 3 3 PC

4 4 7CS-04-0 Applications To regulate dampers, valves or other regulatory functions: sturdy drive torque. running time s position indication angle of rotation changeable from outside load independent speed regulated direction of rotation changeable from inside electromagnetic compatibility controlled maintenance-free Technical data 7CS-04-0 Connnection scheme (continuous control) Control Control signal (Continuous control) Control signal (On/Off) Feedback signal Connecting voltage Power consumption Transformer sizing Angle of rotation Direction of rotation Running time (90 ) Torque Connection Safety class Protection Dimensions Ambient temperature Maintenance CE Weight Continuous control / On/Off VDC or...0 VDC (Standard) or ma or ma 0 VDC (Off) 4 VAC / DC (On) VDC or...0 VDC (Standard) 4 VAC (50/60 Hz) / DC±0% 8.0 W.0 VA max. 95 (adjustable from outside) changeable from inside s. cable 900 mm / 0.75 mm III IP 54 (cable downwards) 5 x 65 x 89 mm C maintenance-free 73/3/EWG, 89/336/EWG 750 g BBNBKG

5 7CS Adjustment of the angle of rotation (fig. ) 0 Both end stops are adjusted to 0 and 90. For smaller rotation angles, loosen the screws at the metal end stop, adjust the end stops as requested, and fasten the screws again. Ø6 Fixing of the shaft (fig. ) by the locking clamp to the damper shaft: 8... mm mm Adjustment of the functional switches (fig. ) Direction of rotation clockwise ( ) counter clockwise ( ) OFF ON ON OFF 3 4 Control signal...0 VDC (Standard) VDC ma ma, - -, Switches actually unused must be at position OFF. All switches are set to OFF by factory default. Technical drawing 7CS-04-0

6 6 7CS Application To regulate dampers, valves or other regulatory functions: sturdy drive torque 84 Nm running time 4 s position indication angle of rotation changeable from outside load independent speed regulated direction of rotation changeable from inside electromagnetic compatibility controlled maintenance-free Technical data 7CS Connnection scheme (continuous control) Control Control signal (Continuous control) Control signal (On/Off) Feedback signal Connecting voltage Power consumption Transformer sizing Angle of rotation Direction of rotation Running time (90 ) Torque Connection Safety class Protection Dimensions Ambient temperature Maintenance CE Weight Continuous control / On/Off VDC or...0 VDC (Standard) or ma or ma 0 VDC (Off) 4 VAC / DC (On) VDC or...0 VDC (Standard) 4 VAC (50/60 Hz) / DC±0%.0 W 5.0 VA max. 95 (adjustable from outside) changeable from inside 4 s 8 Nm cable 900 mm / 0.75 mm III IP 54 (cable downwards) 5 x 65 x 89 mm C maintenance-free 73/3/EWG, 89/336/EWG 750 g BBNBKG

7 7CS Adjustment of the angle of rotation (fig. ) 0 Both end stops are adjusted to 0 and 90. For smaller rotation angles, loosen the screws at the metal end stop, adjust the end stops as requested, and fasten the screws again. Ø6 Fixing of the shaft (fig. ) by the locking clamp to the damper shaft: 8... mm mm Adjustment of the functional switches (fig. ) Direction of rotation clockwise ( ) counter clockwise ( ) OFF ON ON OFF 3 4 Control signal...0 VDC (Standard) VDC ma ma, - -, Switches actually unused must be at position OFF. All switches are set to OFF by factory default. Technical drawing 7CS-04-08

8 8 7CS-04-5 Application To regulate dampers, valves or other regulatory functions: Lifetime under full load 8 Nm more than 60,000 cycles at least 0,000 cycles running time 5 s angle of rotation changeable from outside load independent speed regulated direction of rotation changeable from inside electromagnetic compatibility controlled maintenance-free Technical data 7CS-04-5 Connnection scheme (continuous control) Control Control signal (Continuous control) Control signal (On/Off) Feedback signal Connecting voltage Power consumption Transformer sizing Max. allowable running time per 00 s Angle of rotation Direction of rotation Running time (90 ) Torque Connection Safety class Protection Dimensions Ambient temperature Maintenance CE Weight Conntinuous control / On/Off VDC or...0 VDC (Standard) or ma or ma 0 VDC (Off) 4 VAC / DC (On) VDC or...0 VDC (Standard) 4 VAC (50/60 Hz) / DC±0% 0.0 W 6.0 VA 50% ED max. 95 (adjustable from outside) changeable from inside 5 s cable 900 mm / 0.75 mm III IP 54 (cable downwards) 5 x 65 x 89 mm C maintenance-free 73/3/EWG, 89/336/EWG 750 g BBNBKG

9 7CS Adjustment of the angle of rotation (fig. ) 0 Both end stops are adjusted to 0 and 90. For smaller rotation angles, loosen the screws at the metal end stop, adjust the end stops as requested, and fasten the screws again. Ø6 Fixing of the shaft (fig. ) by the locking clamp to the damper shaft: 8... mm mm Adjustment of the functional switches (fig. ) Direction of rotation clockwise ( ) counter clockwise ( ) OFF ON ON OFF 3 4 Control signal...0 VDC (Standard) VDC ma ma, - -, Switches actually unused must be at position OFF. All switches are set to OFF by factory default. Technical drawing 7CS-04-5

10 0 7S-04-05, 7S S, 7S P5 Application To regulate dampers, valves or other regulatory functions: sturdy drive torque load dependent running time position indication angle of rotation changeable from outside direction of rotation changeable from outside Auxiliary switch adjustable from outside electromagnetic compatibility controlled maintenance-free Technical data Control Connecting voltage Power consumption Transformer sizing Angle of rotation Direction of rotation Running time (90 ) Torque max. auxiliary switch Schaltleistung Zusatzschalter Rückführpoti Connection Safety class Protection Dimensions Ambient temperature Maintenance CE Weight On/Off + Tristate 4 VAC (50/60 HZ) / DC ±0% 3.5 W 6.5 VA max. 95 (adjustable from outside) changeable from outside s changeable from outside 50 VAC / 5 A, change-over switch 4.7 kω cable 900 mm / 0.75 mm III IP 54 (cable downwards) 5 x 65 x 6 mm C maintenance-free 73/3/EWG, 89/336/EWG 530 g 7S S S 7S P5 Connection scheme Connection scheme Connection scheme B BNBK On/Off B BNBK B BNBK B BNBK B BNBK B BNBK 3 S Tristate Potentiometer 3 Auxiliary switch

11 7S-04-05, 7S S, 7S P5 M5 Adjustment of the angle of rotation (fig. ) Both end stops are adjusted to 0 and 90. For smaller rotation angles, loosen the screws at the metal end stop, adjust the end stops as requested, and fasten the screws again. 0 Fixing of the shaft (fig. ) Ø6 by the locking clamp to the damper shaft: 8... mm mm Adjustment of the direction of rotation (fig. ) S S3 S 0,,4,6,8 S S3 S 50 VAC 5 (,5) A S S S3 7S S 4VAC/ DC B BN BK 50/60Hz 3,5 W s IP 54 The actuator is adjusted to clockwise direction by the factory => R. For changing the direction of rotation, turn the adjusting knob to L. Adjustment of the auxiliary switch (fig. ) The scale at the adjusting know corresponds to a percentage graduation, related to ) End stop is set to 0 : Switch off the motor and choose the requested switching position by turning the knob to the right, i.e.. = 0%. ) End stop is set to : Switch off the motor rand choose the requested switching position by turning the knob to the left, i.e..8 = 0%. Technical drawing 7S-04-05

12 7S-30-05, 7S S, 7S P5 Application To regulate dampers, valves or other regulatory functions: sturdy drive torque load dependent running time position indication angle of rotation changeable from outside direction of rotation changeable from outside Auxiliary switch adjustable from outside electromagnetic compatibility controlled maintenance-free Technical data Control Connecting voltage Power consumption Transformer sizing Angle of rotation Direction of rotation Running time (90 ) Torque max. auxiliary switch Schaltleistung Zusatzschalter Rückführpoti Connection Safety class Protection Dimensions Ambient temperature Maintenance CE Weight On/Off 30 VAC (50/60 HZ) ±5%. W 8.0 VA max. 95 (adjustable from outside) changeable from outside s changeable from outside 50 VAC / 5 A, change-over switch 4.7 kω cable 900 mm / 0.75 mm II IP 54 (cable downwards) 5 x 65 x 6 mm C maintenance-free 73/3/EWG, 89/336/EWG 530 g 7S S S 7S P5 Connection scheme (On/Off) Connection scheme (On/Off) Connection scheme (On/Off) S 3 Auxiliary switch B BNBK B BNBK 3 B BNBK N L N L Potentiometer N L

13 7S-30-05, 7S S, 7S P5 3 M5 Adjustment of the angle of rotation (fig. ) Both end stops are adjusted to 0 and 90. For smaller rotation angles, loosen the screws at the metal end stop, adjust the end stops as requested, and fasten the screws again. 0 Fixing of the shaft (fig. ) Ø6 by the locking clamp to the damper shaft: 8... mm mm Adjustment of the direction of rotation (fig. ) S S3 S 0,,4,6,8 S S3 S 50 VAC 5 (,5) A S S S3 7S S 4VAC/ DC B BN BK 50/60Hz 3,5 W s IP 54 The actuator is adjusted to clockwise direction by the factory => R. For changing the direction of rotation, turn the adjusting knob to L. Adjustment of the auxiliary switch (fig. ) The scale at the adjusting know corresponds to a percentage graduation, related to ) End stop is set to 0 : Switch off the motor and choose the requested switching position by turning the knob to the right, i.e.. = 0%. ) End stop is set to : Switch off the motor rand choose the requested switching position by turning the knob to the left, i.e..8 = 0%. Technical drawing 7S-30-05

14 4 7S , 7S S, 7S P5 Application To regulate dampers, valves or other regulatory functions: sturdy drive torque load dependent running time position indication angle of rotation changeable from outside direction of rotation changeable from outside Auxiliary switch adjustable from outside electromagnetic compatibility controlled maintenance-free Technische Daten Control Connecting voltage Power consumption Transformer sizing Angle of rotation Direction of rotation Running time (90 ) Torque max. auxiliary switch Schaltleistung Zusatzschalter Rückführpoti Connection Safety class Protection Dimensions Ambient temperature Maintenance CE Weight Tristate 30 VAC (50/60 HZ) ±5%. W 8.0 VA max. 95 (adjustable from outside) changeable from outside s changeable from outside 50 VAC / 5 A, change-over switch 4.7 kω cable 900 mm / 0.75 mm II IP 54 (cable downwards) 5 x 65 x 6 mm C wartungsfrei 73/3/EWG, 89/336/EWG 530 g 7S S S 7S P5 Connection scheme (Tri-state) Connection scheme (Tri-state) Connection scheme (Tri-state) S B BNBK B BNBK 3 B BNBK 3 N L N L Potentiometer N L Auxiliary switch

15 7S ,7S S,7S P5 5 M5 Adjustment of the angle of rotation (fig. ) Both end stops are adjusted to 0 and 90. For smaller rotation angles, loosen the screws at the metal end stop, adjust the end stops as requested, and fasten the screws again. 0 Fixing of the shaft (fig. ) Ø6 by the locking clamp to the damper shaft: 8... mm mm Adjustment of the direction of rotation (fig. ) S S3 S 0,,4,6,8 S S3 S 50 VAC 5 (,5) A S S S3 7S S 4VAC/ DC B BN BK 50/60Hz 3,5 W s IP 54 The actuator is adjusted to clockwise direction by the factory => R. For changing the direction of rotation, turn the adjusting knob to L. Adjustment of the auxiliary switch (fig. ) The scale at the adjusting know corresponds to a percentage graduation, related to ) End stop is set to 0 : Switch off the motor and choose the requested switching position by turning the knob to the right, i.e.. = 0%. ) End stop is set to : Switch off the motor rand choose the requested switching position by turning the knob to the left, i.e..8 = 0%. Technical drawing 7S

16 6 7CS Application To regulate dampers, valves or other regulatory functions: sturdy drive torque load dependent running time position indication angle of rotation changeable from outside direction of rotation changeable from outside electromagnetic compatibility controlled maintenance-free 7CS Connection scheme (Continuous control) Control Control signal Feedback signal Connecting voltage Power consumption Transformer sizing Angle of rotation Direction of rotation Running time (90 ) Torque Connection Safety class Protection Dimensions Ambient temperature Maintenance CE Weight Technical data Continuous control VDC or...0 VDC (Standard) or ma or ma VDC or...0 VDC (Standard) 4 VAC (50/60 Hz) / DC ±0% 3.5 W 5.5 VA max. 95 (adjustable from outside) changeable from outside s cable 900 mm / 0.75 mm III IP 54 (cable downwards) 5 x 65 x 6 mm C maintenance-free 73/3/EWG, 89/336/EWG 530 g BBNBKG

17 7CS M5 Adjustment of the angle of rotation (fig. ) Both end stops are adjusted to 0 and 90. For smaller rotation angles, loosen the screws at the metal end stop, adjust the end stops as requested, and fasten the screws again. 0 Fixing of the shaft (fig. ) Ø6 by the locking clamp to the damper shaft: 8... mm mm Adjustments (fig. ) 0% 00% 7CS VAC/DC 50/60Hz 3,5 W s IP 54 =...0VDC =...0VDC Angle of rotation: The actuator is adjusted to clockwise direction by the factory => R. For changing the direction of rotation, turn the adjusting knob to L. Regulation range: The actuators are supplied with the (0)...0 VDC for the regulation range 0 to 90. A smaller angle (proportional) can be chosen, where the regulation range (0)...0 VDC goes for. The actuator must be switched off for doing so. B BN BK G Technical drawing 7CS-04-05

18 8 7CS Application To regulate dampers, valves or other regulatory functions: sturdy drive torque 4 Nm load dependent running time position indication angle of rotation changeable from outside direction of rotation changeable from outside electromagnetic compatibility controlled maintenance-free 7CS Connection scheme (Continuous control) Control Control signal Feedback signal Connecting voltage Power consumption Transformer sizing Angle of rotation Direction of rotation Running time (90 ) Torque Connection Safety class Protection Dimensions Ambient temperature Maintenance CE Weight Technical data Continuous control VDC or...0 VDC (Standard) or ma or ma VDC or...0 VDC (Standard) 4 VAC (50/60 Hz) / DC ±0%.0 W 5.0 VA max. 95 (adjustable from outside) changeable from outside 5 s 4 Nm cable 900 mm / 0.75 mm III IP 54 (cable downwards) 5 x 65 x 6 mm C maintenance-free 73/3/EWG, 89/336/EWG 530 g BBNBKG

19 7CS M5 Adjustment of the angle of rotation (fig. ) Both end stops are adjusted to 0 and 90. For smaller rotation angles, loosen the screws at the metal end stop, adjust the end stops as requested, and fasten the screws again. 0 Fixing of the shaft (fig. ) Ø6 by the locking clamp to the damper shaft: 8... mm mm Adjustment of the direction of rotation (fig. ) 7CS VAC/DC 50/60Hz W 4 Nm 5 s IP 54 =...0VDC =...0VDC The actuator is adjusted to clockwise direction by the factory => R. For changing the direction of rotation, turn the adjusting knob to L. B BN BK G Technical drawing 7CS-04-04

20 0 SPECIFIC CHARACTERISTICS OF CONTINOS CONTROL Wiring configuration and recommended cable length - + 7CS - + 7CS B BN BK G B BN BK G L L 4VAC transformer I G R L < 4VAC transformer DC 0()...0V by the controller DC 0()...0V by the actuator max. cable length ( I + I ) R A G L > L L DC 0()...0V by the controller DC 0()...0V by the actuator max. cable length current of set valve selector actuator current cable resistance cable length cable cross section cable cross section 0,75 mm mm,5 mm max. cable length 3 m 3 m 46 m,5 mm 76 m For several actuators switched in parallel the max. cable length must be divided by the number of actuators. Teach-in of range of angle > 30 BBNBKG. Actuator stand by. Adjusting mechanical endstops 3. 5 VDC at 4. Power on actuator 5. Actuator starts teach-in process of range of angle ( s) 6. Remove 5 VDC at 5 VDC

21 NOTES

22 OR WA TO GRNER Stuttgart A8 München Balingen Strasbourg A5 Karlsruhe Freudenstadt Schramberg Offenburg B33 Freiburg B3 Schömberg A8 Wehingen B7 Gosheim Frittlingen Denkingen Tuttlingen Rottweil B4 34 B7 Donaueschingen Singen Spaichingen Aldingen Basel N3 Zürich N

225C-024T-05. Continuous control rotary drive without spring return. Technical data sheet. Description. Technical data. Actuators

225C-024T-05. Continuous control rotary drive without spring return. Technical data sheet. Description. Technical data. Actuators Actuators Technical data sheet 225C-024T-05 Continuous control rotary drive without spring return Description Actuator for adjusting air dampers of 90 angle of rotation to be used in HVAC installations.

More information

Power consuption Motor (Motion) Power consuption Standby (end position) 1,0 W. Position feedback - Switching point 0...95

Power consuption Motor (Motion) Power consuption Standby (end position) 1,0 W. Position feedback - Switching point 0...95 Actuators Technical data sheet 227S-230-05-S1 Rotary drive without spring return Description Actuator for adjusting air dampers of 90 angle of rotation to be used in HVAC installations. Torque Motor 5

More information

Power consuption Motor (Motion) Power consuption Standby (end position) Position feedback. Switching point

Power consuption Motor (Motion) Power consuption Standby (end position) Position feedback. Switching point Actuators Technical data sheet Rotary drive without spring return Description Actuator for adjusting air dampers of 90 angle of rotation to be used in HVAC installations. Torque Motor Nominal Voltage Control

More information

225-230T-05-S2. Rotary drive without spring return. Technical data sheet. Description. Technical data. Actuators

225-230T-05-S2. Rotary drive without spring return. Technical data sheet. Description. Technical data. Actuators Actuators Technical data sheet 225-230T-05-S2 Rotary drive without spring return Description Actuator for adjusting air dampers of 90 angle of rotation to be used in HVAC installations. Torque Motor 5

More information

Power consuption Motor (Motion) Power consuption Standby (end position) Position feedback. Switching point

Power consuption Motor (Motion) Power consuption Standby (end position) Position feedback. Switching point Actuators Technical data sheet Rotary drive without spring return Description Actuator for adjusting air dampers of 90 angle of rotation to be used in HVAC installations. Torque Motor Nominal Voltage Control

More information

Air damper actuators

Air damper actuators 4 634 OpenAir TM Air damper actuators GDB...1 GLB...1 Rotary version, / AC 230 V Electronic motor driven actuators for three-position and modulating control Nominal torque 5 Nm (GDB), 10 Nm (GLB) Mechanically

More information

Electric Rotary Actuator - On/Off or programmable control actuator

Electric Rotary Actuator - On/Off or programmable control actuator Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type

More information

N20xxA, N34xxA NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR FLOATING AND 2-POSITION CONTROL

N20xxA, N34xxA NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR FLOATING AND 2-POSITION CONTROL N2xxA, N34xxA NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR FLOATING AND 2-POSITION CONTROL SPECIFICATIONS Supply voltage N224A / N3424A N223A / N3423A PRODUCT DATA 24 Vac 15%, 5/6 Hz 23 Vac 15%,

More information

Manual triggering of the adaption by pressing the «Adaption» button or with the PC-Tool

Manual triggering of the adaption by pressing the «Adaption» button or with the PC-Tool echnical data sheet SMA-MA Parameterisable damper actuator for adjusting air dampers in ventilation and air-conditioning systems in buildings Air damper size up to approx. m orque 0 Nm Nominal voltage

More information

SAL.. ACVATIX Electromotoric rotary actuators for butterfly or slipper valves. with 90 rotary angle

SAL.. ACVATIX Electromotoric rotary actuators for butterfly or slipper valves. with 90 rotary angle s 4 502 ACVATIX Electromotoric rotary actuators for butterfly or slipper valves SAL.. with 90 rotary angle SAL31.. Operating voltage AC 230 V, 3-position control signal SAL61.. Operating voltage AC/DC

More information

Rotary actuator for 2 and 3-way (control) ball valves Torque 5 Nm Nominal voltage AC 100... 240 V Control: Open/close or 3-point Auxiliary switch

Rotary actuator for 2 and 3-way (control) ball valves Torque 5 Nm Nominal voltage AC 100... 240 V Control: Open/close or 3-point Auxiliary switch echnical data sheet Rotary actuator LR-S Rotary actuator for and -way (control) ball valves orque 5 Nm Nominal voltage C... 4 V Control: Open/close or -point uxiliary switch echnical data Electrical data

More information

ACTUATORS PRODUCT RANGE. In this overview you can find the most important part numbers. from our comprehensive range of actuators for HVAC.

ACTUATORS PRODUCT RANGE. In this overview you can find the most important part numbers. from our comprehensive range of actuators for HVAC. ACTUATORS PRODUCT RANGE In this overview you can find the most important part numbers from our comprehensive range of actuators for HVAC. We'll be happy to provide you with more information at any time.

More information

Power consumption In operation At rest For wire sizing. Cable 1 m, 2 x 0.75 mm 2 Cable 1 m, 6 x 0.75 mm 2 Functional data Torque Motor Spring return

Power consumption In operation At rest For wire sizing. Cable 1 m, 2 x 0.75 mm 2 Cable 1 m, 6 x 0.75 mm 2 Functional data Torque Motor Spring return echnical data sheet SFG-S2- Spring return actuator with emergency function in the IP66 I protective protecti e housing for adjusting air dampers in industrial plants and in technical building installations

More information

Air damper actuators Rotary version, two-position control, with spring return, AC 24 V or AC 230 V

Air damper actuators Rotary version, two-position control, with spring return, AC 24 V or AC 230 V 4 613 OpenAir TM Air damper actuators Rotary version, two-position control, with spring return, AC 24 V or AC 230 V GCA12...1 GCA32...1 Electromotive rotary actuators for two-position control, nominal

More information

Technote. Frese OPTIMA Compact actuators DN10-DN32. Application. Features thermic actuators. Features motoric actuators. Approval. www.frese.

Technote. Frese OPTIMA Compact actuators DN10-DN32. Application. Features thermic actuators. Features motoric actuators. Approval. www.frese. Page 1 of 6 Application Proportional 0-10V or 3-position modulating or On/ Off control of Frese OPTIMA Compact valves in heating, ventilating and air conditioning systems. The actuator can be mounted on

More information

OPERATION AND MAINTENANCE MANUAL

OPERATION AND MAINTENANCE MANUAL OM ELECTRIC ACTUATOR OPERATION AND MAINTENANCE MANUAL PERFORMANCE 12V / 24V Model Torque Speed Motor Motor Speed 12V DC/ AC 24V DC/ AC No. (Nm) (90 0 ) Power 12 V 24 V Run Start Lock Run Start Lock OM-A

More information

Actuator for modulating control AME 435

Actuator for modulating control AME 435 Data sheet Actuator for modulating control AME 435 Description The actuator automatically adapts its stroke to the valve end positions which reduces commissioning time (self stroking). The advanced design

More information

Flexibility moves. Actuators from Gruner Product range overview.

Flexibility moves. Actuators from Gruner Product range overview. Flexibility moves. Actuators from Gruner Product range overview. When a suitable alternative is needed... High-quality actuators, from classic to customized. The Slinky was invented in 1945 by Richard

More information

SQM5... Damper Actuators. Siemens Building Technologies HVAC Products. SQM5..., gear train side with drive shaft no. 7

SQM5... Damper Actuators. Siemens Building Technologies HVAC Products. SQM5..., gear train side with drive shaft no. 7 7 815 SQM5..., gear train side with drive shaft no. 7 SQM5..., rear, version without second drive shaft end Damper Actuators with electronic modules SQM5..., rear, version with 2 drive shaft ends SQM5...

More information

Type 3374 Electric Actuator

Type 3374 Electric Actuator Type 3374 Electric Actuator Application Electric actuator for plant engineering and HVAC The actuator is a linear actuator with or without failsafe action available either in a version with a threestep

More information

HERZ-Thermal Actuators

HERZ-Thermal Actuators HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01

More information

Air damper actuators

Air damper actuators 4 634 OPEN AIR Air damper actuators Rotary version, modulating, AC 24 V GDB16...1 GLB16 1 Electric motor-driven actuators, modulating for DC 1 V control signals, nominal torque 5 / 1 Nm, AC 24 V operating

More information

Technical data. General specifications. Signal voltage 15... 30 V DC Signal duration. 1 s Input 2. Signal voltage. 1 s Analog output.

Technical data. General specifications. Signal voltage 15... 30 V DC Signal duration. 1 s Input 2. Signal voltage. 1 s Analog output. Model Number Features Very small housing High climatic resistance 4 Bit multiturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling

More information

Table of content. 1. Gruner Compact VAV Controller 227VM / GA-VM General Description Setup of VAV actuator... 13

Table of content. 1. Gruner Compact VAV Controller 227VM / GA-VM General Description Setup of VAV actuator... 13 Table of content ge 1. Gruner Compact VAV Controller 227VM / GA-VM... 1 1.1.General Description... 1 1.2.Setup of VAV actuator... 13 1. Gruner Compact VAV Controller 1.1. General Description Pressure independent

More information

Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com. Installation and operating manual

Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com. Installation and operating manual Uni-Valve A /S VENTILER & INSTRUMENTER Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com UNI-EL Electric actuator Installation and operating manual Remote position

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnical data sheet NV24A--RE Communicative globe valve actuator for 2-way and 3-way globe valves Actuating force 1000 N Nominal voltage AC/DC 24 V Control Modulating DC (0)2...10 V Variable Nominal stroke

More information

18 mm Diameter DC 4 Wire

18 mm Diameter DC 4 Wire 18 mm Diameter DC 4 Wire Capacitive Short circuit & reverse polarity protection Improved EMC and ESD Shielding Protection degree IP65 NPN, NO+NC S5000 S5022 S5010 S5032 PNP, NO+NC S5001 S5023 S5011 S5033

More information

Contents. Document information

Contents. Document information User Manual Contents Document information... 2 Introduction... 3 Warnings... 3 Manufacturer... 3 Description... Installation... Configuration... Troubleshooting...11 Technical data...12 Device Scope: PCB

More information

VAV compact controller KNX / PL-Link

VAV compact controller KNX / PL-Link s 3 547 OpenAir VAV compact controller KNX / PL-Link Series E GDB181.1E/KN GLB181.1E/KN Networked compact controller featuring KNX (S-mode / LTE-mode) and PL- Link capability for plants with variable air

More information

Electromotoric Actuators

Electromotoric Actuators OEM SQS35954 with spring return function, without manual adjuster SQS35903, SQS35905, SQS85900, without spring return function, with manual adjuster Electromotoric Actuators for VVG549, VVP459, VXP459,

More information

1115 4G SERIES GOVERNOR. 4-20 ma ANALOGUE DIGITAL SPEED SETTING

1115 4G SERIES GOVERNOR. 4-20 ma ANALOGUE DIGITAL SPEED SETTING 1115 4G SERIES GOVERNOR with 4-20 ma ANALOGUE & DIGITAL SPEED SETTING PO Box 28, 9300AA Roden, The Netherlands Tel: +31 505019888 Fax: +31 505013618 E-mail: regulateurs@regulateurs-europa.com 1115 4G

More information

Emotron M20 Shaft Power Monitor

Emotron M20 Shaft Power Monitor Emotron M20 Shaft Power Monitor Data Sheet English The M20 provides complete flexibility in terms of the type of protection required for your application. You may select either overload and underload protection

More information

VAV compact controller KNX / PL-Link

VAV compact controller KNX / PL-Link s 3 547 OpenAir VAV compact controller KNX / PL-Link Series E GDB181.1E/KN GLB181.1E/KN Networked compact controller featuring KNX (S-mode / LTE-mode) and PL- Link capability for plants with variable air

More information

RY2 miniature industrial relays

RY2 miniature industrial relays 6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,

More information

capacitive sensors 241

capacitive sensors  241 capacitive sensors Highlights: ü Synthetic or metal housings ü 4- or 2-wire devices ü Adjustable operating distances ü For the detection of all kinds of materials www.contrinex.com 241 capacitive Sensors

More information

MPPM1606 MPPM2508 MPPM3210

MPPM1606 MPPM2508 MPPM3210 MPPM 2-jaw parallel self-centering electric gripper Plug & play user friendly gripper. No electricity consumption when gripper is engaged. No programming required. Gripper retention guaranteed in event

More information

Control Devices Catalogue. Control Devices. Preferred and Standard Products

Control Devices Catalogue. Control Devices. Preferred and Standard Products Control Devices Catalogue Control Devices Preferred and Standard Products KOP.J Timer Electronic 22.5 mm Characteristics Mounting KOP.J 22.5 mm mono or multifunction high immunity to interference surface

More information

Manual Operators. Manual Operators for Louvers & Dampers. Hand Quadrant Operator #2 Heavy Duty 1/2 and 3/4 round shafts

Manual Operators. Manual Operators for Louvers & Dampers. Hand Quadrant Operator #2 Heavy Duty 1/2 and 3/4 round shafts Manual Operators Manual Operators for Louvers & Dampers Hand Quadrant Operator #1 1/2 round shaft only Hand Quadrant Operator #2 Heavy Duty 1/2 and 3/4 round shafts Worm Gear with Hand Wheel Operator #3

More information

Series 6000 Torque measured metal bellow coupling

Series 6000 Torque measured metal bellow coupling Properties Free of float metal bellow coupling with integrated torque measurement Non-contact measurement system, high robustness High torsional stiffness Limited torque of inertia Performance Measurement

More information

SMOKE DAMPERS IMOS DKI-1 TECHNICAL CONDITIONS TPI 52-07 (DAMPERS FOR EMISSION EXHAUST) FOR ONE FIRE AREA

SMOKE DAMPERS IMOS DKI-1 TECHNICAL CONDITIONS TPI 52-07 (DAMPERS FOR EMISSION EXHAUST) FOR ONE FIRE AREA 900 43 Kalinkovo 146 Slovakia Tel.: 00421 /2 /40203111 40203112 Fax: 00421 /2 /45989179 Email: imos@imos.sk http://www.imos.sk SMOKE DAMPERS (DAMPERS FOR EMISSION EXHAUST) FOR ONE FIRE AREA IMOS-DKI-1

More information

Elctromotoric Actuators

Elctromotoric Actuators 4 865 Elctromotoric Actuators for small valves VVP47.., VXP47.., VMP47.. SFP21/18 SFP71/18 SFP21/18 AC 230 V operating voltage, 2-position control signal SFP71/18 AC 24 V operating voltage, 2-position

More information

MPLM1630 MPLM2535 MPLM3240

MPLM1630 MPLM2535 MPLM3240 MPLM Self-centering 2-jaw electric parallel gripper with long stroke Plug & play user friendly gripper. No electricity consumption when gripper is engaged. No programming required. Gripper retention guaranteed

More information

Duct Humidity Transmitter

Duct Humidity Transmitter SDC-H Duct Humidity Transmitter Features Replaceable sensor element Humidity measurement for air ducts Minimum and maximum value memory 0 0V, 0 0mA or 0V, 4 0mA measuring signals selectable with jumpers

More information

RDJ10RF/SET. Wireless room temperature controller with 24-hour time switch and LCD. Programmable, for heating systems

RDJ10RF/SET. Wireless room temperature controller with 24-hour time switch and LCD. Programmable, for heating systems 3 072 RDJ10RF RCR10/433 Wireless room temperature controller with 24-hour time switch and LCD Programmable, for heating systems RDJ10RF/SET Operating modes: Automatic, Comfort, Energy Saving, and Frost

More information

for air dampers and control valves of oil and gas burners

for air dampers and control valves of oil and gas burners 7 814 Actuators for air dampers and control valves of oil and gas burners SQM45... SQM48... Electromotoric actuators Torques: SQM45... up to 3 Nm SQM48... up to 20 Nm SQM48.6... up to 35 Nm Running times:

More information

Power Supply and Indicator Unit Type 5024-1. Fig. 1 Type 5024-1. Mounting and Operating Instructions EB 9539 EN

Power Supply and Indicator Unit Type 5024-1. Fig. 1 Type 5024-1. Mounting and Operating Instructions EB 9539 EN Power Supply and Indicator Unit Type 5024-1 Fig. 1 Type 5024-1 Mounting and Operating Instructions EB 9539 EN Edition October 2003 Application 1 Application The Type 5024-1 Power Supply and Indicator Unit

More information

Analogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001

Analogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001 Analogue Input, -fold, MDRC, GH Q605 005 R0001 The analogue input is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via the bus connecting terminal supplied.

More information

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER Application : The RISH CON - Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC Current or load independent DC Voltage.

More information

Contactless Encoder RI360P0-QR24M0-INCRX2-H1181

Contactless Encoder RI360P0-QR24M0-INCRX2-H1181 Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.

More information

AVM 105S, 115S: Valve actuator with SAUTER Universal Technology (SUT)

AVM 105S, 115S: Valve actuator with SAUTER Universal Technology (SUT) Product data sheet 51.362 AVM 105S, 115S: Vale actuator with SAUTER Uniersal Technology (SUT) How energy efficiency is improed Automatic adaptation to ale, precision actiation and high energy efficiency

More information

ABB Drives. User s Manual. Pulse Encoder Interface Module RTAC-01

ABB Drives. User s Manual. Pulse Encoder Interface Module RTAC-01 ABB Drives User s Manual Pulse Encoder Interface Module RTAC-0 Pulse Encoder Interface Module RTAC-0 User s Manual 3AFE 64486853 REV A EN EFFECTIVE:.5.00 00 ABB Oy. All Rights Reserved. Safety instructions

More information

TorqPlus TM Electric Valve Actuators and Controls

TorqPlus TM Electric Valve Actuators and Controls TorqPlus TM Electric Valve Actuators and Controls Torque 150 IN/LB 600 IN/LB The Engineered Solution Bettis TorqPlus quality line of electric actuators are designed for quarter turn applications ball,

More information

Description. Dimensions. Features. www.pwb-encoders.com. precision works better

Description. Dimensions. Features. www.pwb-encoders.com. precision works better Description The MEC22 is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square wave outputs in quadrature

More information

Electric actuators type EA25-250

Electric actuators type EA25-250 Electric actuators type EA25-250 Small & Light Product description The actuators type EA25, EA45, EA120 and EA250 are not only excellently equipped, they also feature very high peak torques ranging from

More information

HVAC Actuators. Schneider Electric Motion

HVAC Actuators. Schneider Electric Motion HVAC Actuators Schneider Electric Motion Index Heating Ventilating and Air Conditioning Typical Applications of Actuators Overview of Actuators Type: STM 6SF-L Type: STM Type: STA Type: STE analogue I/O

More information

INDEX. 1. COMPONENTS pag DIMENSIONS pag TECHNICAL SPECIFICATIONS pag ELECTRICAL CONNECTIONS pag INSTALLATION pag.

INDEX. 1. COMPONENTS pag DIMENSIONS pag TECHNICAL SPECIFICATIONS pag ELECTRICAL CONNECTIONS pag INSTALLATION pag. INDEX 1. COMPONENTS pag.7 3. DIMENSIONS pag.7 2. TECHNICAL SPECIFICATIONS pag.7 4. ELECTRICAL CONNECTIONS pag.8 5. INSTALLATION pag.8 5.1. PRELIMINARY CHECKS pag.8 5.2 INSTALLATION DIMENSIONS pag.8 5.3.

More information

Speed Control Relays SX2

Speed Control Relays SX2 SX2 File 850 CONENS Description.....................................................Page General Information................................................ 2-3 SX2DV General Information...........................................

More information

POWER TOOL SWITCHES VARIETY. QUALITY. INNOVATION

POWER TOOL SWITCHES VARIETY. QUALITY. INNOVATION POWER TOOL SWITCHES VARIETY. QUALITY. INNOVATION POWER TOOL SWITCHES BY MARQUARDT THE PROGRAM This catalog covers our wide range of power tool switches. The standard versions are listed with their part

More information

Know-how makes the difference. Electrical Actuators

Know-how makes the difference. Electrical Actuators Know-how makes the difference Electrical Actuators With Dansk Ventil Center as your business partner, you are always guaranteed a wide and well sorted product range and a unique technical know-how Product

More information

PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description

PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.

More information

WE-350 Series ¼ Turn Electric Actuator

WE-350 Series ¼ Turn Electric Actuator WE-350 Series ¼ Turn Electric Actuator Operation and Installation Manual Pg 1 (Rev. 020113) Table of Contents 1.0 General 1.1 Pre-Installation Inspection 1.2 Storage 1.3 Features & General Information

More information

Position switches FR series

Position switches FR series Position switches FR series Selection diagram 01 A1 08 02 A2 A4 05 A5 external rubber gasket external rubber gasket external rubber gasket external rubber gasket external rubber gasket 21 25 4 69 5 stainless

More information

Electromotoric Actuators

Electromotoric Actuators 4 554 Electromotoric Actuators for valves with 2 mm stroke SQX32.. SQX82.. SQX62 SQX32.. operating voltage AC 23 V, 3-position positioning signal SQX82.. operating voltage AC 24 V, 3-position positioning

More information

TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector

TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector Product datasheet Characteristics TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector Main Range of product Product or component type Range compatibility Enclosure material Bus

More information

TS93 EMR T/PT/TDE. Surface applied door closer

TS93 EMR T/PT/TDE. Surface applied door closer TS EMR T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer with smoke detector (EMR T) Push side track mount door closer with smoke detector (EMR PT) Double

More information

TAC I/NETTM MR-VAV-AX. Application Specific MicroRegulator TM

TAC I/NETTM MR-VAV-AX. Application Specific MicroRegulator TM TAC I/NETTM TM TAC s TM has an extensive range ofpre-engineered VAV control sequences, which combined with a fully integrated actuator and airflow transducer, makes it a low Total Installed Cost solution

More information

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils

More information

Damper Actuators. Technical Databook Version 5.1. Belimo Asia Pacific

Damper Actuators. Technical Databook Version 5.1. Belimo Asia Pacific Damper Actuators Technical Databook Version 5. Belimo Asia Pacific Damper Actuator standard type naming Product naming e.g. L M U 24 -SR General Damper Actuator 4Nm 2Nm Nm 5Nm 2Nm Mechanical Fail-Safe

More information

MINI MCR-SL-R-UI(-SP)

MINI MCR-SL-R-UI(-SP) Resistance/potiposition transducer INTERFACE Data Sheet 0807_en_05 Description PHOENIX CONTACT - 0/008 Features The slim MINI MCR-SL-R-UI... potiposition transducer has a width of only 6. mm and converts

More information

Digital input modules

Digital input modules 8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a

More information

OpenAir GCA Series Spring Return Rotary 24 Vac Modulating 0 to 10 Vdc Control, 24 Vac/dc Modulating 2 to 10 Vdc Control Electric Damper Actuators

OpenAir GCA Series Spring Return Rotary 24 Vac Modulating 0 to 10 Vdc Control, 24 Vac/dc Modulating 2 to 10 Vdc Control Electric Damper Actuators OpenAir GCA Series Spring Return Rotary 4 Vac Modulating 0 to 10 Vdc Control, 4 Vac/dc Modulating to 10 Vdc Control Electric Damper Actuators Document No. 155-173P5 EA GCA-1 Description The OpenAir direct

More information

CONNECTOR AMPLIFIER FOR PROPORTIONAL VALVES (4-20 ma Input Version)

CONNECTOR AMPLIFIER FOR PROPORTIONAL VALVES (4-20 ma Input Version) TECHNICAL DATASHEET #TD1102AX CONNECTOR AMPLIFIER FOR PROPORTIONAL VALVES (4-20 ma Input Version) Part Number: Connector Amplifier CAPV-H-4-20MA-x complete with cable CAPV-4C-yM Where: x = current output

More information

Service Manual Washing machine Toploader

Service Manual Washing machine Toploader Whirlpool Europe Customer Services AWT 2289 Service Manual Washing machine Toploader AWT 2289 Model AWT 2289 Version 8561 228 10190 Page Technical data 2-3 Spare part list 4 Exploded view 5-6 Wiring diagram

More information

Long-distance capacitive proximity sensor. Ordering Information EB-74. Sensors. Accessories (Order Separately) Mounting Brackets. Unshielded.

Long-distance capacitive proximity sensor. Ordering Information EB-74. Sensors. Accessories (Order Separately) Mounting Brackets. Unshielded. Long-distance capacitive proximity sensor Capacitive Proximity Sensor with Adjustable Sensitivity Detects both metallic and non-metallic objects (glass, lumber, water, oil, plastic, etc.) without direct

More information

For tailormade safety. Actuators of the 300 series for fire protection and smoke extraction.

For tailormade safety. Actuators of the 300 series for fire protection and smoke extraction. For tailormade safety. Actuators of the 300 series for fire protection and smoke extraction. The new performers. Reliable, user-friendly and flexible. Actuators have been a central component of the Gruner

More information

Knob Potentiometer with Switch

Knob Potentiometer with Switch Knob Potentiometer with Switch The is a revolutionary concept in panel mounted potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the mounting

More information

Automation System TROVIS 6400 TROVIS 6493 Compact Controller

Automation System TROVIS 6400 TROVIS 6493 Compact Controller Automation System TROVIS 6400 TROVIS 6493 Compact Controller For panel mounting (front frame 48 x 96 mm/1.89 x 3.78 inch) Application Digital controller to automate industrial and process plants for general

More information

Givare NC-SRS 280 och 880

Givare NC-SRS 280 och 880 Givare NC-SRS 280 och 880 Aratron AB/Nordic Control, 02 03 SRS280SEALED ROTARY SENSOR PERFORMANCE ±2 Resistance ±20% Hysteresis (repeatability) Accuracy Applied voltage maximum Resolution Output smoothness

More information

S03, S05 Series Low-Torque Spring- Return Direct-Coupled Actuators

S03, S05 Series Low-Torque Spring- Return Direct-Coupled Actuators S, S Series Low-Torque Spring- Return Direct-Coupled Actuators S, S, S, S, S, S INSTALLATION AND OPERATING INSTRUCTIONS S, S Series Low-Torque Spring-Return Direct-Coupled Actuators (DCA) are used for

More information

Electrical Actuators

Electrical Actuators 4 895 Electrical Actuators for valves VVP45..., VXP45..., VMP45... SSC31 SSC81 SSC61... SSC31 operating voltage AC 230 V 3-position control signal SSC81 operating voltage AC 24 V 3-position control signal

More information

I nstallation. M100Q Series Proportional Actuator with R81Q Controller Board for Thermistor Sensor Applications. Tools Needed.

I nstallation. M100Q Series Proportional Actuator with R81Q Controller Board for Thermistor Sensor Applications. Tools Needed. FANs 268.1, 1628.3 Installation Bulletin M100Q Issue Date 1099 M100Q Series Proportional Actuator with R81Q Controller Board for Thermistor Sensor Applications I nstallation Parts Included M110QGA-1 and

More information

OpenAir Electric Damper Actuators GDE/GLB Series Non-spring Return Rotary 24 Vac - Modulating Control 0 to 10 Vdc

OpenAir Electric Damper Actuators GDE/GLB Series Non-spring Return Rotary 24 Vac - Modulating Control 0 to 10 Vdc Document No. 155-187P25 EA GDE/GLB-1 OpenAir Electric Damper Actuators GDE/GLB Series Non-spring Return Rotary 24 Vac - Modulating Control 0 to 10 Vdc Description The OpenAir direct coupled 24 Vac non-spring

More information

ARI-PACO Electric thrust actuator Electric thrust actuator ARI-PACO

ARI-PACO Electric thrust actuator Electric thrust actuator ARI-PACO Electric thrust actuator Electric thrust actuator ARI-PACO ARI-PACO 0,85 kn Electric thrust actuator for Heating-, Ventilation- and Air-Conditioning- Systems, 3... 20 mm travel Thrust 0,85 kn Tightly-closed

More information

ABB i-bus KNX Fan Coil Actuator, MDRC FCA/S 1.1M, 2CDG 110 084 R0011

ABB i-bus KNX Fan Coil Actuator, MDRC FCA/S 1.1M, 2CDG 110 084 R0011 , 2CDG 110 084 R0011 2CDC 071 112 F0008 The Fan Coil Actuator is a modular installation device (MDRC) in pro M design. It is intended for installation in the distribution board on 35 mm mounting rails.

More information

Electromotoric actuators

Electromotoric actuators 86 ACVATIX Electromotoric actuators for Combi-valve types VPI5.., D5 32 SSD3.. SSD8.. SSD6.. SSD3.. operating voltage AC 230 V 3-position control signal SSD8.. operating voltage AC 2 V 3-position control

More information

Temperature Controller (Heat Pumps)

Temperature Controller (Heat Pumps) 3 346 Temperature Controller (Heat Pumps) RWD34 RWD44 For comfort control in HVAC & R systems Standalone electronic controller Programmable controller with preconfigured applications Two universal inputs

More information

DMX-K-DRV. Integrated Step Motor Driver + (Basic Controller) Manual

DMX-K-DRV. Integrated Step Motor Driver + (Basic Controller) Manual DMX-K-DRV Integrated Step Motor Driver + (Basic Controller) Manual DMX-K-DRV Manual page 1 rev 1.33 COPYRIGHT 2007 ARCUS, ALL RIGHTS RESERVED First edition, June 2007 ARCUS TECHNOLOGY copyrights this document.

More information

Hydraulic Control Solutions

Hydraulic Control Solutions Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district

More information

Automatic Voltage Regulator User s Manual

Automatic Voltage Regulator User s Manual Resp. dept. R&D We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden. Copyright

More information

60 Series - General purpose relays 6-10 A. Features

60 Series - General purpose relays 6-10 A. Features 60 Series - General purpose relays 6-10 A Features 60.12 60.13 Plug-in mount 10 A General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listing

More information

SKR - industry relay

SKR - industry relay SKR - industry relay the universal relay SKR the time module STM the socket The strengths of the SKR industry relay lie in the mature and thoughtout construction. Over-average contact safety and life time,

More information

STRA-14 Control equipment Fläkt Woods

STRA-14 Control equipment Fläkt Woods STRA-14 Control equipment Fläkt Woods Functions STRA-14 Temperature control CO 2 level control Free cooling feature Occupancy detection Condensation risk detection Communication: Modbus or BACnet Mode

More information

Electromotoric Actuators

Electromotoric Actuators 4 863 Electromotoric Actuators for zone valves and Combi valves SFA21/18 SFA71/18 SFA21/18 AC 230 V operating voltage, 2-position control signal SFA71/18 AC 24 V operating voltage, 2-position control signal

More information

RoHS. Shock / vibration resistant. Magnetic field proof. Many variants

RoHS. Shock / vibration resistant. Magnetic field proof. Many variants Sendix 5000 / 500 (Shaft / Hollow shaft) Push-Pull / RS4 ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors.

More information

Selector Switch Type 01

Selector Switch Type 01 Selector Switch Type 0 Compact positions selector switch,000 switching cycles with up to.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft Optional IP front panel

More information

Electronic Control Devices The European Product Catalogue 2007

Electronic Control Devices The European Product Catalogue 2007 FX07 Field Controller (1/4) FX07 Field Controller Display Model Dimensions in mm (inches) The FX07 is a terminal unit controller in the Facility Explorer range of products. The controller is designed specifically

More information

Shutter Actuator Standard, 4-fold, 230 VAC, MDRC RA/S 4.230.1, GH Q631 0076 R0111. ABB i-bus EIB

Shutter Actuator Standard, 4-fold, 230 VAC, MDRC RA/S 4.230.1, GH Q631 0076 R0111. ABB i-bus EIB , GH Q631 0076 R0111 2CDC 071 240 F0003 The Shutter Actuator Standard is used to control a maximum of four independent 230 VAC drives for positioning shutters, blinds, awnings and other hangings as well

More information

Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous

Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of

More information

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage

More information

DCS Input/Output Relay Card Series

DCS Input/Output Relay Card Series Input/Output Relay Card Series I/O RELAY CARD (with loopback test function) 8N The 8N series I/O Relay Cards easily and quickly standardize and facilitate installation of the relay board. Loopback test

More information