SERVICE BULLETIN. REASON This version software service bulletin provides an upgrade that includes the following changes:

Size: px
Start display at page:

Download "SERVICE BULLETIN. REASON This version 0563.26 software service bulletin provides an upgrade that includes the following changes:"

Transcription

1 TITLE NAVIGATION - GARMIN G1000 SYSTEM SOFTWARE UPGRADE TO VERSION FOR AIRPLANES EQUIPPED WITH NAV III (NON-WAAS INSTALLATIONS ONLY) EFFECTIVITY The airplanes that follow that are equipped with the Garmin G1000 Nav III Avionics Option but are not equipped with the Wide Area Augmentation System (WAAS) (have not installed SB ): MODEL SERIAL NUMBERS 172R thru S 172S9810 thru 172S T , thru , thru T182T T thru T , T thru T H thru , thru T206H T thru T , T thru T REASON This version software service bulletin provides an upgrade that includes the following changes: Resolution for Garmin Service Advisory No Rev A Momentary loss of GRS 77 and GDC 74A functions as addressed in Cessna Service Newsletter SNL Approach Identifiers Added the ability to check for approaches with 3-numeric approach identifiers so that WAAS LPV approaches with 3-numeric identifiers would be available; software fix to Garmin Service Advisory No.: Flight Plan Sorting The functionality of sorting the stored flight plans was removed; software fix to Garmin Service Advisory No.: Graphical METARs The display of graphical METARs is added to the active flight plan page and moving maps. METAR Text Raw METAR text is displayed on the active flight plan page and moving maps when a METAR flag is highlighted with the map cursor. Weather Legend A weather legend is added to the maps that share the weather-related soft keys (NEXRAD, XM, LTNG, and METAR). The display of this legend is controlled via the Legend soft key in the MAP tier of soft keys. METAR Search Radius The active flight plan page can now be configured to show a METAR flag (and corresponding report) from a nearby location for any waypoint in the flight plan without an active reporting station. The search radius is set to 30 NM. Selected-Altitude Intercept Arc A Selected-Altitude Intercept Arc is displayed on the moving maps that follow: Navigation map, PFD inset map, AUX - Trip Planning map, Active Flight Plan page map, and all NRST maps. A cyan arc is drawn across the active leg (when enabled via the Map Setup) to indicate the location at which the aircraft will reach the selected altitude based on the current barometric altitude, vertical speed, and ground speed. Profile View The profile view option is added to the MFD Navigation Map. When enabled, the airplane's vertical position over terrain and obstacles is shown centered on the current ground track. When datalink March 27, 2012 Page1of11 Cessna Aircraft Company, Cessna Customer Service, P.O. Box 7706, Wichita, KS 67277, U.S.A , Fax , customercare@cessna.textron.com COPYRIGHT 2012

2 weather is available, winds aloft information is also shown, which depicts a headwind or tailwind as a function of altitude. This vertical profile view is pilot configurable. Circular SAR Pattern A circular search and rescue pattern is now available with the accomplishment of Cessna Service Bulletin SEB Garmin G1000 Enhanced Search and Rescue Enablement. Runway Highlights SVT no longer renders a runway highlight on the PFD synthetic view when there is obscuring terrain between the current aircraft position and the runway. Dual Navigation Databases This feature allows a future navigation database to be stored in a standby location on the SD card in the bottom slot of each GDU. When the standby database becomes effective (as determined by the system date and time) the standby database will be automatically loaded into the active location internal to the GDU. This allows users to proactively update their aircraft with the next navigation cycle as soon as it becomes available, rather than having to wait until the first effective date to switch over. Database Crossfill This feature allows most databases to be automatically cross-filled from the bottom SD card in one GDU to the bottom SD card in the other GDU. The following databases are supported: Basemap, Terrain, Airport Terrain, Obstacle, SafeTaxi, Airport Directory, and Standby Navigation. Startup Screen When the dual navigation database feature is active, the Garmin startup screen is now displayed for up to 150 seconds at power up, when necessary, while the internal navigation database is updating. The following message is displayed on the screen: "Please Wait. Navigation Database Update in Progress. Do Not Remove Power from Displays". If the database update has not completed during the allotted time, an error message is then displayed on the MFD and the navigation database is disabled for that power cycle. DB SYNC Manual control of the DB SYNC function is removed. Geometric Altitudes All GPS-derived geometric altitudes that are referenced to sea level are now displayed using the label "GSL". CDI Deflection When flying an LNAV+V or an LNAV / VNAV approach and a vectors-to-final approach transition has not been selected, a full-scale deflection of the CDI on the final approach segment now represents no more than 0.3 NM - even if the final approach segment is longer than 7 NM. When the missed approach point is located well before the runway, a full-scale deflection of the CDI after the MAP represents 350 feet until a missed approach is initiated. Software fix to Garmin Service Advisory No.: Voice Call-Out Alerts Voice call-out alerts issued within 5 NM of a runway threshold are now based only upon the GPS height above that runway threshold. Improved Lighting Curve The lighting curve has been updated for the displays and their bezels to provide more optimal dimming characteristics while under manual control with the dimming potentiometer. Pilot-Selectable MGRS Position Format This configuration item enables the ability to display GPS position according to the Military Grid Reference System, and is controlled by a new setting on the AUX System Setup page. Resolution for Garmin Service Advisory No Rev A - If Synthetic Vision is installed, Pathways is now enabled. Resolution for Garmin Service Advisory No Rev A - Momentary failure indications (Red-X) can occur when deleting stored data. Fixed Content Data Logging Provides capability of logging flight data to a comma-separated-value (CSV) file on an SD card in the upper MFD slot. GTS800 TAS System Input/Output Communication If installed via field approval, allows input/output communication on RS-232 and ARINC-429 interfaces. Flight Plan Import/Export Provides capability to import and export flight plans between an SD card and the GDU flight plan memory. NAV III System Configuration Bar END (endurance), FOB (fuel on board), and FOD (fuel over destination) options are now displayed on the MFD status bar. Resolution for Garmin Service Advisory No. 0904A If Synthetic Vision is installed, Pathways is now enabled. Fixed Content Data Logging Provides capability of logging flight data to a comma-separated-value (CSV) file on an SD card in the upper MFD slot. Resolution for Garmin Service Advisory No Change implemented to prevent the possibility of flagging primary flight data, COM frequency, and EIS information while all stored flight plans or user waypoints are being deleted. AOPA Airport Directory Information Support added for display on the "WPT-Airport Information" page. Field aircraft will need to purchase the AOPA directory via Page 2 March 27, 2012

3 MFD Page Navigation Updated the MFD selection window to show the Page Group and Page Title for selection. Waypoint Arrival Alerts This configuration item enables the 'arriving at [waypoint]' advisory alert when the aircraft is 10 seconds away from reaching the arrival alert distance to the destination waypoint. DESCRIPTION This service bulletin provides parts and instructions to upgrade the Garmin G1000 software on non-waas enabled installations to version COMPLIANCE MANDATORY. This service bulletin must be accomplished within the next 200 hours of operation or 12 months, whichever occurs first. NOTE: For NAV III airplanes equipped with KAP-140 autopilot, Cessna Service Bulletin SB (Garmin G1000 System Software Upgrade to ) (or later revision) must be accomplished before compliance with this service bulletin. NOTE: Existing Garmin software backup CDs shall be destroyed and discarded to eliminate the possibility of loading the incorrect software at a later date. APPROVAL Cessna received FAA approval for the technical data in this publication that changes the airplane type design. Cessna received EASA approval for the technical data in this publication that changes the airplane type design. WEIGHT AND BALANCE INFORMATION Negligible REFERENCES Model 172 Series 1996 and On Maintenance Manual Model 182/T182T Series 1997 and On Maintenance Manual Model 206/T206 Series 1998 and On Maintenance Manual Garmin G1000 Cockpit Reference Guide for Cessna NAV III, Part Number Rev. A. Garmin G1000 Pilot's Guide for Cessna NAV III, Part Number Rev. A. The following documents can be viewed by Cessna Authorized Service Facilities by going to Garmin G1000 System Installation Manual, Part Number , Revision H (or latest revision) Garmin GDU 1040 Installation Manual, Part Number , Revision V (or latest revision) Garmin GMA 1347 Installation Manual, Part Number , Revision E (or latest revision) Garmin GIA 63 Installation Manual, Part Number , Revision J (or latest revision) Garmin GRS 77/GMU 44 Installation Manual, Part Number , Revision Q (or latest revision) Garmin GDC 74A Installation Manual, Part Number , Revision H (or latest revision) Garmin GEA 71 Installation Manual, Part Number , Revision G (or latest revision) Garmin GTX 33 Installation Manual, Part Number , Revision J (or latest revision) March 27, 2012 Page 3

4 Garmin G1000 NAV III Line Maintenance Manual, Part Number , Revision P (or latest revision) NOTE: Make sure all publications used are complete and current. Refer to NOTE: This information shall be considered an amendment to the Cessna Manufacturer's Service/Maintenance Manual and should be accomplished within the specified time requirement. PUBLICATIONS AFFECTED Model 172R & Model 172S Illustrated Parts Catalog Model 182S/182T/T182T Illustrated Parts Catalog Model 206H & Model T206H Illustrated Parts Catalog NOTE: Make sure all publications used are complete and current. Refer to ACCOMPLISHMENT INSTRUCTIONS General Information NOTE 1: This software update only supports NAV III installations that are non-waas enabled airplanes. If the aircraft is a WAAS-enabled aircraft do not perform this software update. Cessna Service Bulletin SEB-34-02, Garmin G1000 System Software Upgrade to Version for Airplanes Equipped with NAV III (WAAS-Enabled Installations Only) supports NAV III installations that are for WAAS airplanes. NOTE 2: If the system software or configuration fails to upload correctly during accomplishment of this Service Bulletin, do the upload again. Do not try to upload more than five times. If the system does not upload after the fifth attempt, refer to the Garmin Line Maintenance Manual, Revision P or later, Appendix B.3 Software / Configuration Troubleshooting. If the system still does not upload, contact Cessna Propeller Aircraft Product Support: Telephone or FAX Do not cancel a software or configuration upload that is in progress. Let the system either successfully load or fail. NOTE 3: If the alert chime comes on at any time during the accomplishment of this Service Bulletin, you can go to the Alert Configuration page in the GDU page group, push the soft key directly below the ACK, and this should make the chime stop. 1. Make the 006-B Software SD Loader Card as follows: A. Use the new Cessna NAV III Installation software CD shown in TABLE 1 and update the SD Card for the correct model airplane: TABLE 1 INSTALLATION SOFTWARE CD AND GARMIN SYSTEM SOFTWARE (G1000) PART NUMBER FILE VERSION 006-B B. Right mouse click on the START button in the lower left corner of the computer screen and click on EXPLORE. C. Find the CD drive with the CD in it on your computer and double click it to open the CD file. D. Double click on the file labeled 006-B _OA.exe. E. When the window opens, click the SETUP button. F. Install a blank SD Card into the SD card reader and click the NEXT button. NOTE: SanDisk is the SD card brand that is recommended by Garmin for use in their G1000 system. Page 4 March 27, 2012

5 G. The next window will ask for your SD card reader location. Select the location of the SD card reader and then click the NEXT button. H. Click the NEXT button when the window opens. NOTE: If there is information on the SD card, it will be erased by the Software Application Builder. I. The software will begin to transfer from the CD to the SD Card. J. When the data has transferred to the SD card, click the FINISH button. K. Remove the SD card from the SD card reader and identify the SD card as 006-B L. Remove the CD from the computer and install it in the Nav III/Garmin Software sleeve in the Pilot s Operating Handbook (POH). 2. Turn on the G1000 in configuration and / or normal mode to verify existing options. A. (Refer to TABLES 2, 3, and 4.) Record which options are installed for later reference. If you do not know which options are installed on your airplane, use TABLE 5 to make a list of the installed options before you go to Step 4. This list is necessary to do the correct software upload and configuration. Record in TABLE 5 all installations and configuration options necessary for the airplane. NOTE: To stop the alert chime in configuration mode, on the Alert Configuration page in the GDU page group, push the soft key that is below ACK. TABLE 2- Model 172R and 172S. 172R/172S AIRPLANE MODEL CONFIGURATION FILE SELECTIONS - PULL-DOWN MENU Cessna 172R B Full Configuration (Non-WAAS) or Cessna 172S B Full Configuration (Non-WAAS) Cessna NAV III CO Guardian Installation Option (if applicable) NOTE: All NAV III 2006 and on Model Year airplanes have the CO Guardian installed. Cessna NAV III GDL90 Installation Option (if applicable) NOTE: The GDL90 is not the same equipment as the GDL69. Cessna NAV III KAP 140 Installation Option (if applicable) NOTE: Use only if a Honeywell KAP 140 AFCS is installed. A KC140 controller is installed in the instrument panel. All 2008 and later Models only installed the Garmin GFC-700 AFCS autopilot. Cessna NAV III KN 63 DME Installation Option (if applicable) NOTE: All airplanes equipped with the Cessna NAV III KN 63 DME installation option have a DME antenna installed on the bottom of the fuselage below the cabin. Cessna NAV III KR 87 ADF Installation Option (if applicable) NOTE: Airplanes equipped with the NAV III KR 87 ADF installation option have a receiver installed on the instrument panel. Cessna NAV III (Pre 2007 Model Year Airplanes) Comant CI Antenna Configuration NOTE: All Pre 2007 Model Year Airplanes not equipped with WAAS are equipped with the Comant CI antenna. Cessna NAV III Disable SVT Pathways Option (if desired) NOTE: Most installations will not use this option. March 27, 2012 Page 5

6 TABLE 3- Model 182T and T182T 182T/T182T AIRPLANE MODEL CONFIGURATION FILE SELECTIONS - PULL-DOWN MENU Cessna 182T B Full Configuration (Non-WAAS) or Cessna T182T B Full Configuration (Non-WAAS) Cessna NAV III CO Guardian Installation Option (if applicable) NOTE: All NAV III 2006 and on Model Year airplanes have the CO Guardian installed. Cessna NAV III KTA 870 TAS Installation Option (if applicable) NOTE: All airplanes equipped with the Cessna NAV III KTA 870 TAS have a TAS circuit breaker installed on the circuit breaker panel. NOTE: All airplanes equipped with the Cessna NAV III KTA 870 TAS have a directional TAS antenna installed on the top of the airplane and a TAS antenna installed on the bottom of the airplane. Cessna NAV III KAP 140 Installation Option (if applicable) NOTE: Only use if a Honeywell KAP 140 AFCS is installed. A KC140 controller is installed in the instrument panel. All 2007 and later Models only installed the Garmin GFC-700 AFCS autopilot. Cessna NAV III KN63 DME Installation Option (if applicable) NOTE: All airplanes equipped with the Cessna NAV III KN 63 DME installation option have a DME antenna installed on the bottom of the fuselage below the cabin. Cessna NAV III KR 87 ADF Installation Option (if applicable) NOTE: Airplanes equipped with the NAV III KR 87 ADF installation option have a receiver installed on the instrument panel. Cessna NAV III (Pre 2007 Model Year Airplanes) Comant CI Antenna Configuration NOTE: All Pre 2007 Model Year Airplanes not equipped with WAAS are equipped with the Comant CI antenna. Cessna NAV III Disable SVT Pathways Option (if desired) NOTE: Most installations will not use this option. Page 6 March 27, 2012

7 TABLE 4- Models 206H and T206H 206H/T206H AIRPLANE MODEL CONFIGURATION FILE SELECTIONS - PULL-DOWN MENU Cessna 206H B Full Configuration (Non-WAAS) or Cessna T206H B Full Configuration (Non-WAAS) as applicable Cessna NAV III CO Guardian Installation Option NOTE: All NAV III 2006 and on Model Year airplanes have the CO Guardian installed. Cessna NAV III KTA 870 TAS Installation Option (if applicable) NOTE: All airplanes equipped with the Cessna NAV III KTA 870 TAS have a TAS circuit breaker installed on the circuit breaker panel. NOTE: All airplanes equipped with the Cessna NAV III KTA 870 TAS have a directional TAS antenna installed on the top of the airplane and a TAS antenna installed on the bottom of the airplane. Cessna NAV III KAP 140 Installation Option (if applicable) NOTE: Only use if a Honeywell KAP 140 AFCS is installed. A KC140 controller is installed in the instrument panel. All 2007 and later Models only installed the Garmin GFC-700 AFCS autopilot. Cessna NAV III KN63 DME Installation Option NOTE: All airplanes equipped with the Cessna NAV III KN 63 DME installation option have a DME antenna installed on the bottom of the fuselage below the cabin. Cessna NAV III KR 87 ADF Installation Option NOTE: Airplanes equipped with the NAV III KR 87 ADF installation option have a receiver installed on the instrument panel. Cessna NAV III (Pre 2007 Model Year Airplanes) Comant CI Antenna Configuration NOTE: All Pre 2007 Model Year Airplanes not equipped with WAAS are equipped with the Comant CI antenna. Cessna NAV III Disable SVT Pathways Option (if desired) NOTE: Most installations will not use this option. TABLE 5- Configuration Selections Cessna (Model) 006-B Full Configuration (Non-WAAS) NOTE: Use this table to list the necessary configuration uploads for the specified airplane installation. March 27, 2012 Page 7

8 CAUTION: Failure to follow the instructions in exact step-by-step order could result in damage to the GDU SUPPLEMENTAL database and/or SD cards. 3. Do the preparation of the airplane for the software update as follows: A. Remove the GDU Supplemental Data SD Cards from the bottom slot of the PFD and the MFD units. B. Mark the SD Cards PFD or MFD. C. Remove the electronic checklist SD card from the top slot of the MFD as applicable. 4. Load the GDU (PFD and MFD) software as follows: A. Make sure that all switches are in the OFF/NORM position. B. Connect the airplane to an external power unit. C. Make sure that no SD cards are installed in the PFD and MFD slots. D. Make sure that the PFD (ESS BUS and AVN BUS 1) and the MFD (AVN BUS 2) circuit breakers are disengaged. E. Insert the 006-B SD card into the top card slot of the MFD. F. Put the BAT MASTER switch to the ON position. G. Put the AVIONICS MASTER switches to the ON position and put the STDBY BATT switch to ARM. H. Push and hold the ENT key on the MFD and engage the MFD (AVN BUS 2) circuit breaker. I. Release the softkey after the INITIALIZING SYSTEM message appears. J. Push the YES soft key to upload GDU system files when the messages that follows shows: DO YOU WANT TO UPDATE SYSTEM FILES? K. If the message that follows shows, push the YES soft key: DO YOU WANT TO UPLOAD THE SPLASH SCREEN? L. Push the ENT key when the splash screen update is complete and you are asked to PRESS ANY SOFTKEY TO CONTINUE. M. Software load to the MFD is complete when the display starts into configuration mode. N. Leave the MFD display powered on. O. Remove the 006-B Garmin SD Card from the MFD and insert it into the top PFD slot. P. Engage the PFD (ESS and AVN BUS 1) circuit breakers and do Steps 4H thru 4M again for the PFD. 5. Initial software load and configuration upload. A. Turn the small FMS knob on the PFD to go to the system group SYSTEM UPLOAD page. B. Push the small FMS knob to start the cursor. C. Turn the small FMS knob to highlight the applicable airplane model from the group menu option and push the ENT key. D. Turn the small FMS knob, select the applicable Cessna (Model Number) 006-B Full Configuration (Non-WAAS) item menu option and push the ENT key. NOTE: The software included in the 006-B SD Card will automatically determine which files must be loaded. Page 8 March 27, 2012

9 E. Press the LOAD softkey to load selected software/config items. Periodically monitor the loading process for failures. A green PASS message is shown beside software and configuration items. NOTE: Periodically monitor the software load for progress. If the upload to a unit is unsuccessful, an UPLOAD FAIL message will be posted and the upload will stop. A red FAIL will be shown beside the software that failed. Press enter to acknowledge the fail message and to continue the same software load. If unable to load the software after several attempts, uncheck the software and configuration boxes using the ENT softkey and press the LOAD softkey to continue with the rest of the software load before troubleshooting cause of failure. F. Monitor the upload status. When the Upload Complete message is shown, push the ENT key to select OK. NOTE: This can take up to 60 minutes. 6. For airplanes equipped with additional items as shown in TABLES 2, 3, or 4 (refer to TABLE 5), do the necessary uploads as follows: NOTE: This can take several minutes for each option. WARNING: Do not configure an option that is not installed on the airplane. A. Turn the large FMS knob counterclockwise to go to the ITEM menu. B. Turn the small FMS knob to expand the ITEM pull down menu field and highlight one of the Cessna Nav III software uploads that is applicable for your airplane. C. Push the ENT key. D. Push the LOAD soft key to install the software. E. Monitor the upload status. When the Upload Complete message is shown, push the ENT key to select OK. F. Do Steps 6A thru 6E again until all applicable (refer to TABLE 5) software uploads are complete. G. Press the FMS knob to unselect the cursor. 7. Push the UPDT CFG softkey and then the ENT key to select YES to update the PFD Config module, and push the ENT key to select OK when complete. 8. Complete the basic software load and system verification procedures as follows: A. On the PFD, turn the large FMS knob to go to the SYSTEM group. Turn the small FMS knob to go to the MANIFEST CONFIGURATION page. B. (Refer to TABLE 6.) Make sure that the data file and file version shown in TABLE 6 are shown in the SYSTEM field window. TABLE 6 DATA FILE FILE VERSION 006-B Put the AVIONICS and BAT MASTER switches in the off position. 10. Make sure that the STDBY BATT switch is in the off position. 11. Remove the SD card from the top slot on the PFD. 12. Do the system checks as follows: A. Install the GDU Supplemental Data SD Cards in to the bottom slot on the PFD and the MFD units. B. Install the Electronic Checklist SD Card in to the top slot on the MFD. March 27, 2012 Page 9

10 C. Put the BAT MASTER switch to the ON position. D. Put the AVIONICS MASTER switches to the ON position. E. Make sure that no G1000 system messages, alerts, annunciations, or Red X s are shown on the PFD or the MFD on the AUX-SYSTEM STATUS page. NOTE: Reference Garmin Line Maintenance Manual Revision P (or later revision) for troubleshooting instructions. 13. Put the AVIONICS and BAT MASTER switches in the off position. 14. Make sure that the STDBY BATT switch is in the off position. 15. Remove external power receptacle. 16. (For airplanes equipped with TAWS-B) Do the enablement of Garmin G1000 Terrain Awareness Warning System Class-B (TAWS-B), SB Revision 1 or later revision. 17. (For airplanes equipped with Chartview) Do the Garmin G1000 NAV III Avionics Chartview Option, SB Revision 1 or later. NOTE: Airplanes equipped with GDU Supplemental Database SD Cards will do the same procedures as cards described in SB Revision 1 or later. 18. (For airplanes equipped with Garmin Synthetic Vision Technology) Do the enablement of Garmin G1000 Synthetic Vision Installation, SB (or latest revision). 19. (For airplanes equipped with Garmin Search and Rescue) Do the Garmin G1000 Search and Rescue Enablement, SB (or latest revision) or the Garmin G1000 Enhanced Search and Rescue Enablement, SEB If necessary, do the Standby Battery Ammeter Calibration Procedure. (Refer to Section 2.2 of the Garmin G1000 NAV III Line Maintenance Manual Revision P (or latest revision).) NOTE: GDU software version is with version installed. 21. (For airplanes equipped with Dual GMA 1347 Audio Panels) Do the configuration of the dual audio panels in accordance with the latest revision of Garmin Installation Bulletin No.: System software build supports AOPA database display. The database is available for purchase at Refer to Cessna Service Newsletter Do the software and paper documentation: A. After successful completion of this service bulletin, remove, destroy, and discard the old Cessna NAV III Installation Software CD from the sleeve in the Pilot's Operating Handbook (POH) to eliminate the possibility of reloading the incorrect software at a later date, and get the new Cessna NAV III Installation Software CD to load the new software. B. Remove the old Garmin G1000 Cockpit Reference Guide for Cessna NAV III and replace it with the Garmin G1000 Cockpit Reference Guide for Cessna NAV III, Part Number C. The Garmin G1000 Cockpit Reference Guide for Cessna NAV III, Part Number and the Garmin NAV III Installation Software CD may be ordered through Cessna Service Parts and Programs. You must use the new CD when you do the software upgrade on the airplane. When not in use, the CD should be stored in the Pilot's Operating Handbook sleeve for the NAV III Garmin Software. 24. Make an entry in the airplane logbook that states compliance and method of compliance with this Service Bulletin. Page 10 March 27, 2012

11 MATERIAL INFORMATION Order the parts below to install this service bulletin: NOTE: REVA Garmin G1000 Pilot's Guide for Cessna NAV III is optional. NEW P/N QUAN- TITY NAVIIIGSW System Software CD with Garmin 006-B * REVA 1 Garmin G1000 Integrated Flight Deck Cockpit Reference Guide for Cessna NAV III REVA 1 Garmin G1000 Pilot s Guide for Cessna NAV III KEY WORD OLD P/N INSTRUCTIONS/ DISPOSITION NAVIIIGSW00-02 and prior revisions and prior revisions REVA Destroy and Discard Remove and Replace Remove and Replace *Airplanes with version installed do not need a new Garmin G1000 Integrated Flight Deck Cockpit Reference Guide for Cessna NAV III. March 27, 2012 Page 11

12

13 OWNER ADVISORY TITLE NAVIGATION - GARMIN G1000 SYSTEM SOFTWARE UPGRADE TO VERSION FOR AIRPLANES EQUIPPED WITH NAV III (NON-WAAS INSTALLATIONS ONLY) TO: Cessna 172, 182, and 206 Owners REASON This owner advisory is to inform you that has been issued. Version software service bulletin provides an upgrade that includes the following changes: Resolution for Garmin Service Advisory No Rev A Momentary loss of GRS 77 and GDC 74A functions as addressed in Cessna Service Newsletter SNL Approach Identifiers Added the ability to check for approaches with 3-numeric approach identifiers so that WAAS LPV approaches with 3-numeric identifiers would be available; software fix to Garmin Service Advisory No.: Flight Plan Sorting The functionality of sorting the stored flight plans was removed; software fix to Garmin Service Advisory No.: Graphical METARs The display of graphical METARs is added to the active flight plan page and moving maps. METAR Text Raw METAR text is displayed on the active flight plan page and moving maps when a METAR flag is highlighted with the map cursor. Weather Legend A weather legend is added to the maps that share the weather-related soft keys (NEXRAD, XM, LTNG, and METAR). The display of this legend is controlled via the Legend soft key in the MAP tier of soft keys. METAR Search Radius The active flight plan page can now be configured to show a METAR flag (and corresponding report) from a nearby location for any waypoint in the flight plan without an active reporting station. The search radius is set to 30 NM. Selected-Altitude Intercept Arc A Selected-Altitude Intercept Arc is displayed on the moving maps that follow: Navigation map, PFD inset map, AUX - Trip Planning map, Active Flight Plan page map, and all NRST maps. A cyan arc is drawn across the active leg (when enabled via the Map Setup) to indicate the location at which the aircraft will reach the selected altitude based on the current barometric altitude, vertical speed, and ground speed. Profile View The profile view option is added to the MFD Navigation Map. When enabled, the airplane's vertical position over terrain and obstacles is shown centered on the current ground track. When datalink weather is available, winds aloft information is also shown, which depicts a headwind or tailwind as a function of altitude. This vertical profile view is pilot configurable. Circular SAR Pattern A circular search and rescue pattern is now available with the accomplishment of Cessna Service Bulletin SEB Garmin G1000 Enhanced Search and Rescue Enablement. Runway Highlights SVT no longer renders a runway highlight on the PFD synthetic view when there is obscuring terrain between the current aircraft position and the runway. Dual Navigation Databases This feature allows a future navigation database to be stored in a standby location on the SD card in the bottom slot of each GDU. When the standby database becomes effective (as determined by the system date and time) the standby database will be automatically loaded into the active location internal to the GDU. This allows users to proactively update their aircraft with the next navigation cycle as soon as it becomes available, rather than having to wait until the first effective date to switch over. Database Crossfill This feature allows most databases to be automatically cross-filled from the bottom SD card in one GDU to the bottom SD card in the other GDU. The following databases are supported: Basemap, Terrain, Airport Terrain, Obstacle, SafeTaxi, Airport Directory, and Standby Navigation. March 27, 2012 Page1of4 Cessna Aircraft Company, Cessna Customer Service, P.O. Box 7706, Wichita, KS 67277, U.S.A , Fax , customercare@cessna.textron.com COPYRIGHT 2012

14 OWNER ADVISORY Startup Screen When the dual navigation database feature is active, the Garmin startup screen is now displayed for up to 150 seconds at power up, when necessary, while the internal navigation database is updating. The following message is displayed on the screen: "Please Wait. Navigation Database Update in Progress. Do Not Remove Power from Displays". If the database update has not completed during the allotted time, an error message is then displayed on the MFD and the navigation database is disabled for that power cycle. DB SYNC Manual control of the DB SYNC function is removed. Geometric Altitudes All GPS-derived geometric altitudes that are referenced to sea level are now displayed using the label "GSL". CDI Deflection When flying an LNAV+V or an LNAV / VNAV approach and a vectors-to-final approach transition has not been selected, a full-scale deflection of the CDI on the final approach segment now represents no more than 0.3 NM - even if the final approach segment is longer than 7 NM. When the missed approach point is located well before the runway, a full-scale deflection of the CDI after the MAP represents 350 feet until a missed approach is initiated. Software fix to Garmin Service Advisory No.: Voice Call-Out Alerts Voice call-out alerts issued within 5 NM of a runway threshold are now based only upon the GPS height above that runway threshold. Improved Lighting Curve The lighting curve has been updated for the displays and their bezels to provide more optimal dimming characteristics while under manual control with the dimming potentiometer. Pilot-Selectable MGRS Position Format This configuration item enables the ability to display GPS position according to the Military Grid Reference System, and is controlled by a new setting on the AUX System Setup page. Resolution for Garmin Service Advisory No Rev A - If Synthetic Vision is installed, Pathways is now enabled. Resolution for Garmin Service Advisory No Rev A - Momentary failure indications (Red-X) can occur when deleting stored data. Fixed Content Data Logging Provides capability of logging flight data to a comma-separated-value (CSV) file on an SD card in the upper MFD slot. GTS800 TAS System Input/Output Communication If installed via field approval, allows input/output communication on RS-232 and ARINC-429 interfaces. Flight Plan Import/Export Provides capability to import and export flight plans between an SD card and the GDU flight plan memory. NAV III System Configuration Bar END (endurance), FOB (fuel on board), and FOD (fuel over destination) options are now displayed on the MFD status bar. Resolution for Garmin Service Advisory No. 0904A If Synthetic Vision is installed, Pathways is now enabled. Fixed Content Data Logging Provides capability of logging flight data to a comma-separated-value (CSV) file on an SD card in the upper MFD slot. Resolution for Garmin Service Advisory No Change implemented to prevent the possibility of flagging primary flight data, COM frequency, and EIS information while all stored flight plans or user waypoints are being deleted. AOPA Airport Directory Information Support added for display on the "WPT-Airport Information" page. Field aircraft will need to purchase the AOPA directory via MFD Page Navigation Updated the MFD selection window to show the Page Group and Page Title for selection. Waypoint Arrival Alerts This configuration item enables the 'arriving at [waypoint]' advisory alert when the aircraft is 10 seconds away from reaching the arrival alert distance to the destination waypoint. provides parts and instructions to upgrade the Garmin G1000 software to version Page 2 March 27, 2012

15 OWNER ADVISORY COMPLIANCE MANDATORY. This service bulletin must be accomplished within the next 200 hours of operation or 12 months, whichever occurs first. NOTE: For NAV III airplanes equipped with KAP-140 autopilot, Cessna Service Bulletin SB (Garmin G1000 System Software Upgrade to ) (or later revision) must be accomplished before compliance with this service bulletin. NOTE: Existing Garmin software backup CDs shall be destroyed and discarded to eliminate the possibility of loading the incorrect software at a later date. LABOR HOURS 2.0 man-hours to load the software upgrade If necessary, 0.2 man-hour to do the applicable configuration upload for airplanes equipped with the Garmin G1000 Terrain Awareness System (TAWS-B) If necessary, 0.2 man-hour to do the applicable configuration upload for airplanes equipped with the Garmin G1000 Chartview System If necessary, 0.2 man-hour to do the applicable configuration upload for airplanes equipped with Garmin G1000 Synthetic Vision Technology (SVT) If necessary, 0.2 man-hour to do the applicable configuration upload for airplanes equipped with Garmin G1000 Search and Rescue If necessary, 0.2 man-hour to do the standby battery ammeter battery calibration procedure If necessary, 0.2 man-hour to do the dual audio panel configuration procedure WARRANTY For airplanes identified within the serial effectivity and complying within 200 hours or twelve months from the date of this service bulletin; whichever occurs first: Applicable Cockpit Reference Guide (CRG) and software CD parts credit and a labor allowance credit of 2.0 man-hours per airplane will be provided to load the software upgrade. If necessary, a labor allowance credit of 0.2 man-hour will be provided to do the applicable configuration upload for airplanes equipped with the Garmin G1000 Terrain Awareness System (TAWS-B). If necessary, a labor allowance credit of 0.2 man-hour will be provided to do the applicable configuration upload for airplanes equipped with the Garmin G1000 Chartview System. If necessary, a labor allowance credit of 0.2 man-hour will be provided to do the applicable configuration upload for airplanes equipped with Garmin G1000 Synthetic Vision Technology (SVT). If necessary, a labor allowance credit of 0.2 man-hour will be provided to do the applicable configuration upload for airplanes equipped with Garmin G1000 Search and Rescue. If necessary, a labor allowance credit of 0.2 man-hour will be provided to do the standby battery ammeter battery calibration procedure. If necessary, a labor allowance credit of 0.2 man-hour will be provided to do the dual audio panel configuration procedure. Freight will be credited at the most economical method unless pre-approved by Cessna. For pre-approval contact Cessna Service Parts and Programs Warranty Administration at Telephone: , Fax: or cpd2claims@cessna.textron.com. March 27, 2012 Page 3

16 OWNER ADVISORY To receive credit, the work must be completed within stated compliance timeframe and a Warranty Claim submitted by a Cessna Single Authorized Service Facility within 30 calendar days of Service Bulletin compliance before the credit expiration dates shown below. Domestic... April 27, 2013 International... April 27, 2013 Special Note to Authorized Service Facilities: When you complete the Warranty Claim, the labor allowance claimed shall be itemized for each above action completed. Please contact a Cessna Authorized Service Facility for detailed information and arrange to have Cessna service bulletin accomplished on your airplane. NOTE: As a convenience, service documents are now available online to all our customers through a simple, free-of-charge registration process. If you would like to sign up, please visit the "Customer Access" link at to register. Page 4 March 27, 2012

DATABASE MANAGEMENT JEPPESEN DATABASES APPENDIX B

DATABASE MANAGEMENT JEPPESEN DATABASES APPENDIX B DATABASE CAUTION: Never disconnect power to the system when loading a database. Power interruption during the database loading process could result in maintenance being required to reboot the system. The

More information

GNS 430/430A. Quick Reference

GNS 430/430A. Quick Reference GNS 430/430A Quick Reference KEYS AND KNOBS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 COM Power/Volume 7 RNG (map range) 13 OBS 2 VLOC Volume 8 MENU 14 MSG (message) 3 COM Flip-flop 9 ENT (enter)

More information

P/N 135A-970-022 FAA Approved: 12/6/2007 Section 9 Initial Release Page 1 of 8

P/N 135A-970-022 FAA Approved: 12/6/2007 Section 9 Initial Release Page 1 of 8 FAA APPROVED AIRPLANE FLIGHT MANUAL SUPPLEMENT FOR GARMIN SL40 NAV/COMM Serial No: Registration No: When the GARMIN SL40 COM radio is installed in the Liberty Aerospace XL-2, this supplement is applicable

More information

G1000 Search Patterns. National Emergency Services Academy Mission Aircrew School (June 2013 Rev D)

G1000 Search Patterns. National Emergency Services Academy Mission Aircrew School (June 2013 Rev D) G1000 Search Patterns National Emergency Services Academy Mission Aircrew School (June 2013 Rev D) Standardized Visual Search Pattern method Visual search pattern techniques include: Minimum # of user

More information

LOG OF REVISIONS Revision Page FAA Date of Number Number(s) Description Approved Approval A All Initial Release K.

LOG OF REVISIONS Revision Page FAA Date of Number Number(s) Description Approved Approval A All Initial Release K. LOG OF REVISIONS Revision Page FAA Date of Number Number(s) Description Approved Approval A All Initial Release K. Campbell* 4/4/00 B 5, 10 Remove SKYWATCH and add GTX 330 TIS G. Baker* 11/21/02 C All

More information

Add-on for Microsoft FSX 2008 FriendlyPanels. All right reserved

Add-on for Microsoft FSX 2008 FriendlyPanels. All right reserved FriendlyPanels Software FMC manual is in a separate document Add-on for Microsoft FSX 2008 FriendlyPanels. All right reserved 1 1. Introduction 2. Requirements 3. Installing the panel 4. CRJ 700 Gauges

More information

S-Tec System Thirty Autopilot

S-Tec System Thirty Autopilot Cirrus Design Section 9 Pilot s Operating Handbook and FAA Approved Airplane Flight Manual Supplement for S-Tec System Thirty Autopilot When the S-Tec System Thirty Autopilot is installed in the Cirrus

More information

Garmin GNC 300XL Pilot s Quick Reference Guide ---------------------------------------------------------------

Garmin GNC 300XL Pilot s Quick Reference Guide --------------------------------------------------------------- Garmin GNC 300XL Pilot s Quick Reference Guide --------------------------------------------------------------- CURSOR/ DATA ENTRY Cursor control: The cursor key is used to activate the cursor in the comm

More information

Global Positioning System Steering (GPSS) Converter Pilot s Operating Handbook

Global Positioning System Steering (GPSS) Converter Pilot s Operating Handbook Global Positioning System Steering (GPSS) Converter Pilot s Operating Handbook List of Effective Pages * Asterisk indicates pages changed, added, or deleted by revision. Retain this record in front of

More information

GPSMAP 62 series quick start manual. For use with the GPSMAP 62, 62s, and 62st

GPSMAP 62 series quick start manual. For use with the GPSMAP 62, 62s, and 62st GPSMAP 62 series quick start manual For use with the GPSMAP 62, 62s, and 62st Getting Started warning See the Important Safety and Product Information guide in the product box for product warnings and

More information

The KFC 225 s Internal GPSS. by Dan Herr, TTCF Member. November 2014

The KFC 225 s Internal GPSS. by Dan Herr, TTCF Member. November 2014 The KFC 225 s Internal GPSS by Dan Herr, TTCF Member November 2014 The KFC 225 was designed after the advent of aviation GPS, but before WAAS and before GPS approaches had a glideslope. Unlike VOR navigation,

More information

Flight database services for Pro Line 4 and Pro Line 21

Flight database services for Pro Line 4 and Pro Line 21 Flight database services for Pro Line 4 and Pro Line 21 1 Flight database services Pro Line 4 and Pro Line 21 Database Options Welcome to Rockwell Collins Flight Database Services. Below you will find

More information

GPSMAP 62 series quick start manual. For use with the GPSMAP 62, 62s, 62st, 62sc, and 62stc

GPSMAP 62 series quick start manual. For use with the GPSMAP 62, 62s, 62st, 62sc, and 62stc GPSMAP 62 series quick start manual For use with the GPSMAP 62, 62s, 62st, 62sc, and 62stc Getting Started warning See the Important Safety and Product Information guide in the product box for product

More information

Field Manager Mobile Worker User Guide for RIM BlackBerry 1

Field Manager Mobile Worker User Guide for RIM BlackBerry 1 Vodafone Field Manager Mobile Worker User Guide for RIM BlackBerry APPLICATION REQUIREMENTS Supported devices listed here o http://support.vodafonefieldmanager.com Application requires 600 KB of application

More information

Global Avionics Training Specialists, LLC.

Global Avionics Training Specialists, LLC. Global Avionics Training Specialists, LLC. PRIMUS 2000/DORNIER 328 JET INTEGRATED AVIONICS SYSTEM LINE MAINTENANCE FAMILIARIZATION COURSE SYLLABUS I. INTRODUCTION A. SYSTEM DESCRIPTION The PRIMUS 2000

More information

For Microsoft Flight Simulator X 2008 FriendlyPanels. All right reserved

For Microsoft Flight Simulator X 2008 FriendlyPanels. All right reserved FriendlyPanels Software For Microsoft Flight Simulator X 2008 FriendlyPanels. All right reserved REPLACEMENT NAVIGATION GAUGES FOR FSX AIRCRAFT 1 1. Introduction. 2. Requirements 3. Installing the pack

More information

GPSMAP 62 series quick start manual. For use with the GPSMAP 62, 62s, 62st, 62sc, and 62stc

GPSMAP 62 series quick start manual. For use with the GPSMAP 62, 62s, 62st, 62sc, and 62stc GPSMAP 62 series quick start manual For use with the GPSMAP 62, 62s, 62st, 62sc, and 62stc Getting Started warning See the Important Safety and Product Information guide in the product box for product

More information

G1000 Integrated Flight Deck

G1000 Integrated Flight Deck G1000 Integrated Flight Deck Pilot s Training Guide 190-00368-05 Rev. A Garmin G1000 Pilot s Training Guide i Copyright 2006 Garmin Ltd. or its subsidiaries. All rights reserved. Garmin International,

More information

SA-9600 Surface Area Software Manual

SA-9600 Surface Area Software Manual SA-9600 Surface Area Software Manual Version 4.0 Introduction The operation and data Presentation of the SA-9600 Surface Area analyzer is performed using a Microsoft Windows based software package. The

More information

GPSMAP 78 series. quick start manual. for use with the GPSMAP 78, GPSMAP 78s, and GPSMAP 78sc

GPSMAP 78 series. quick start manual. for use with the GPSMAP 78, GPSMAP 78s, and GPSMAP 78sc GPSMAP 78 series quick start manual for use with the GPSMAP 78, GPSMAP 78s, and GPSMAP 78sc Getting Started warning See the Important Safety and Product Information guide in the product box for product

More information

09 FLIGHT MANAGEMENT, NAVIGATION

09 FLIGHT MANAGEMENT, NAVIGATION Course overview N E X T G E N E R A T I O N Airplane General Air Systems Warning Systems, Communications, Ice & Rain Protection Electrical Engines, APU, Fuel System Hydraulics, Flight Controls, Landing

More information

Sync Guide. Sync Overview. Before the Event. During the Event. After the Event. Greater Giving Event Software

Sync Guide. Sync Overview. Before the Event. During the Event. After the Event. Greater Giving Event Software Sync Guide Sync Overview Timeline Equipment Terms + This guide will instruct you on how to transfer data between Greater Giving Event Software and Auctionpay Master terminal Before, During and After your

More information

Avaya Network Configuration Manager User Guide

Avaya Network Configuration Manager User Guide Avaya Network Configuration Manager User Guide May 2004 Avaya Network Configuration Manager User Guide Copyright Avaya Inc. 2004 ALL RIGHTS RESERVED The products, specifications, and other technical information

More information

U g CS for DJI Phantom 2 Vision+, Phantom 3 and Inspire 1

U g CS for DJI Phantom 2 Vision+, Phantom 3 and Inspire 1 U g CS for DJI Phantom 2 Vision+, Phantom 3 and Inspire 1 Copyright 2015, Smart Projects Holdings Ltd Contents Preface... 2 Drone connection and first run... 2 Before you begin... 2 First run... 2 Connecting

More information

History of Revisions. Ordering Information

History of Revisions. Ordering Information No part of this document may be reproduced in any form or by any means without the express written consent of II Morrow Inc. II Morrow, Apollo, and Precedus are trademarks of II Morrow Inc. Windows is

More information

G1000TM. pilot s training guide instructor s reference

G1000TM. pilot s training guide instructor s reference G1000TM pilot s training guide instructor s reference COPYRIGHT 2004, 2005 Garmin Ltd. or its subsidiaries. All rights reserved. Garmin International, Inc., 1200 East 151st Street, Olathe, Kansas 66062,

More information

Model 288B Charge Plate Graphing Software Operators Guide

Model 288B Charge Plate Graphing Software Operators Guide Monroe Electronics, Inc. Model 288B Charge Plate Graphing Software Operators Guide P/N 0340175 288BGraph (80207) Software V2.01 100 Housel Ave PO Box 535 Lyndonville NY 14098 1-800-821-6001 585-765-2254

More information

ABB solar inverters. User s manual ABB Remote monitoring portal

ABB solar inverters. User s manual ABB Remote monitoring portal ABB solar inverters User s manual ABB Remote monitoring portal List of related manuals Title ABB Remote monitoring portal User s manual NETA-01 Ethernet adapter module User s manual Code (English) 3AUA0000098904

More information

Install Guide for Time Matters and Billing Matters 11.0

Install Guide for Time Matters and Billing Matters 11.0 Install Guide for Time Matters and Billing Matters 11.0 Copyright and Trademark Notice LexisNexis, the Knowledge Burst logo, Lexis, lexis.com, Shepard's, Shepardize, martindale.com and Martindale-Hubbell

More information

Upgrade Instructions. View Manager 96 v. 5.1. Software Upgrade

Upgrade Instructions. View Manager 96 v. 5.1. Software Upgrade WORLD LEADER IN ELECTRONIC SECURITY Upgrade Instructions View Manager 96 v. 5.1 1 Software Upgrade This software permits you to upgrade your VM96 version 3.x or 4.x system to the latest version of VM96

More information

STANDARD UPDATING NAV DATABASES DOWNLOADING TREND AND FAULT HISTORY FILES

STANDARD UPDATING NAV DATABASES DOWNLOADING TREND AND FAULT HISTORY FILES PILOT'S GUIDE Avionic & Electrical Systems May 29, 2015 STANDARD UPDATING NAV DATABASES AND DOWNLOADING TREND AND FAULT HISTORY FILES ON THE PC-12/47E PRIMUS APEX SYSTEM Page 2/21 1 RECORD OF REVISIONS

More information

User s Manual for Fingerprint Door Control Software

User s Manual for Fingerprint Door Control Software User s Manual for Fingerprint Door Control Software Foreword The naissance of F7 indicated that fingerprint reader enters into professional door control domain. That s why we developed this software to

More information

GNS 430(A) Pilot s Guide and Reference

GNS 430(A) Pilot s Guide and Reference GNS 430(A) Pilot s Guide and Reference RECORD OF REVISIONS Revision Date of Revision Description A 12/98 Initial Release B 4/99 Update to conform to recent SW changes C 6/99 Added Addendum D 7/99 Update

More information

OPTAC Fleet Viewer. Instruction Manual

OPTAC Fleet Viewer. Instruction Manual OPTAC Fleet Viewer Instruction Manual Stoneridge Limited Claverhouse Industrial Park Dundee DD4 9UB Help-line Telephone Number: 0870 887 9256 E-Mail: optac@stoneridge.com Document version 4.0 Part Number:

More information

Windows 10.1 Tablet (UB-15MS10 and UB-15MS10SA) FAQ December 2014

Windows 10.1 Tablet (UB-15MS10 and UB-15MS10SA) FAQ December 2014 Windows 10.1 Tablet (UB-15MS10 and UB-15MS10SA) FAQ December 2014 Navigation... 2 Question 1: What are charms used for?... 2 Question 2: How do I navigate while using a mouse or trackpad?... 3 Question

More information

Mass Announcement Service Operation

Mass Announcement Service Operation Mass Announcement Service Operation The Mass Announcement Service enables you to automate calling a typically large number of contacts, and playing them a pre-recorded announcement. For example, a weather

More information

GFC 700 AUTOMATED FLIGHT CONTROL SYSTEM (AFCS)

GFC 700 AUTOMATED FLIGHT CONTROL SYSTEM (AFCS) All GFC 700 AUTOMATED FLIGHT CONTROL SYSTEM (AFCS) 1. DESCRIPTION This section covers those systems and components which use inputs to the system to automatically control the flight path of the aircraft

More information

Producing Standards Based Content with ToolBook

Producing Standards Based Content with ToolBook Producing Standards Based Content with ToolBook Contents Using ToolBook to Create Standards Based Content... 3 Installing ToolBook... 3 Creating a New ToolBook Book... 3 Modifying an Existing Question...

More information

Bombardier Challenger 605 - Communications

Bombardier Challenger 605 - Communications GENERAL The aircraft communication system includes those components and subsystems providing air-to-ground, interphone and cabin communications. The system is also responsible for recording communications

More information

Jeppesen Mobile FliteDeck

Jeppesen Mobile FliteDeck Jeppesen Mobile FliteDeck Frequently Asked Questions Introduction and How to Get Mobile FliteDeck Q. What is Jeppesen Mobile FliteDeck? A: Jeppesen Mobile FliteDeck provides pilots who subscribe to Jeppesen

More information

USER MANUAL (PRO-CURO LITE, PRO & ENT) [SUPPLIED FOR VERSION 3]

USER MANUAL (PRO-CURO LITE, PRO & ENT) [SUPPLIED FOR VERSION 3] Pro-curo Software Ltd USER MANUAL (PRO-CURO LITE, PRO & ENT) [SUPPLIED FOR VERSION 3] CONTENTS Everyday use... 3 Logging on... 4 Main Screen... 5 Adding locations... 6 Working with locations... 7 Duplicate...

More information

Western Canada Map Installation & Usage Instructions

Western Canada Map Installation & Usage Instructions Table of Contents 1. Installation of the Western Canada Map onto the Garmin Nuvi Series : Page 2 2. Finding LSD s using the Western Canada Map & your Garmin Nuvi : Page 3 3. Installation of the Western

More information

Weather Direct Displays show Lost Forecast (blank boxes in the picture icons)

Weather Direct Displays show Lost Forecast (blank boxes in the picture icons) Weather Direct Displays show Lost Forecast (blank boxes in the picture icons) Many routine events can cause a Lost Forecast situation. Examples include: Power outage Change batteries Internet down in your

More information

Weather Capture Software Guide Version 1.4 Revision: June 10 2008

Weather Capture Software Guide Version 1.4 Revision: June 10 2008 Weather Capture Software Guide Version 1.4 Revision: June 10 2008 1 Introduction 2 Menu screen structure and navigation Menu Bar i. File ii. Display iii. Settings Alarm User Download Language iv. Help

More information

ivms-4200 Intelligent Video Management System Quick Start Guide

ivms-4200 Intelligent Video Management System Quick Start Guide ivms-4200 Intelligent Video Management System Quick Start Guide Notices The information in this documentation is subject to change without notice and does not represent any commitment on behalf of HIKVISION.

More information

CONNECTIVITY QUICK START GUIDE

CONNECTIVITY QUICK START GUIDE CONNECTIVITY QUICK START GUIDE MZD-CONNECT 1 MZD-CONNECT INFOTAINMENT SYSTEM The MZD-Connect system is divided into five sections as displayed on the Home screen. The Home screen can be accessed at any

More information

Avalanche Site Edition

Avalanche Site Edition Avalanche Site Edition Version 4.8 avse ug 48 20090325 Revised 03/20/2009 ii Copyright 2008 by Wavelink Corporation All rights reserved. Wavelink Corporation 6985 South Union Park Avenue, Suite 335 Midvale,

More information

mapping software user s manual

mapping software user s manual mapping software user s manual Copyright 2004-2005 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 E. 151 st Street, Olathe, Kansas 66062 U.S.A. Tel. 913/397.8200 or 800/800.1020 Fax. 913/397.8282

More information

GPS 72. Personal Navigator. Read This First! quick start guide

GPS 72. Personal Navigator. Read This First! quick start guide GPS 72 Personal Navigator Read This First! quick start guide Internal Antenna Quick Start Unit Overview Interface keys MOB ZOOM Battery Compartment MARK External Data/Auxilary Power Port 120 x 160 Four

More information

Merging Labels, Letters, and Envelopes Word 2013

Merging Labels, Letters, and Envelopes Word 2013 Merging Labels, Letters, and Envelopes Word 2013 Merging... 1 Types of Merges... 1 The Merging Process... 2 Labels - A Page of the Same... 2 Labels - A Blank Page... 3 Creating Custom Labels... 3 Merged

More information

Service Bulletin [2014 02]

Service Bulletin [2014 02] How do you know if you have a PanelView Plus or a Panelview Plus 6? The quickest way is to look at the type of memory slot the unit has on the back. If it accepts and SD Card, it s a PanelView Plus 6.

More information

Creating a Poster in PowerPoint 2010. A. Set Up Your Poster

Creating a Poster in PowerPoint 2010. A. Set Up Your Poster View the Best Practices in Poster Design located at http://www.emich.edu/training/poster before you begin creating a poster. Then in PowerPoint: (A) set up the poster size and orientation, (B) add and

More information

Appointment Scheduler

Appointment Scheduler EZClaim Appointment Scheduler User Guide Last Update: 11/19/2008 Copyright 2008 EZClaim This page intentionally left blank Contents Contents... iii Getting Started... 5 System Requirements... 5 Installing

More information

GNS 530(A) Pilot s Guide and Reference

GNS 530(A) Pilot s Guide and Reference GNS 530(A) Pilot s Guide and Reference RECORD OF REVISIONS Revision Date of Revision Description A 5/00 Initial Release B 5/01 Update to reflect software changes through 2.06 C 4/03 Update to reflect

More information

Revision Number Revision Date Insertion Date/Initials 1 st Ed. Feb 01, 00 2 nd Ed. Jun 24, 02 3rd Ed. Feb 15, 07

Revision Number Revision Date Insertion Date/Initials 1 st Ed. Feb 01, 00 2 nd Ed. Jun 24, 02 3rd Ed. Feb 15, 07 List of Effective Pages * Asterisk indicates pages changed, added, or deleted by current revision. Retain this record in front of handbook. Upon receipt of a Record of Revisions revision, insert changes

More information

OPTAC Fleet Viewer. Instruction Manual

OPTAC Fleet Viewer. Instruction Manual OPTAC Fleet Viewer Instruction Manual Stoneridge Limited Claverhouse Industrial Park Dundee DD4 9UB Help-line Telephone Number: 0870 887 9256 E-Mail: optac@stoneridge.com Document version 3.0 Part Number:

More information

Volvo Parts Corporation 04-02-03 Volvo Trip Manager. Contents

Volvo Parts Corporation 04-02-03 Volvo Trip Manager. Contents User s Manual Contents Functional Overview...4 Welcome to Volvo Trip Manager...4 About the documentation...4 Information Downloading...5 Vehicle Groups...6 Warning Messages...6 Reports...7 Trend Report...7

More information

iloq P10S.10/20 Programming device User's Guide

iloq P10S.10/20 Programming device User's Guide iloq P10S.10/20 Programming device User's Guide CONTENTS CONTENTS... 2 GENERAL... 3 USING THE PROGRAMMING DEVICE... 5 Starting the programming device... 5 Programming of locks... 5 Programming of keys...

More information

Table of Contents. Manual for Core Staff - Equipment/Scheduling Core Facilities

Table of Contents. Manual for Core Staff - Equipment/Scheduling Core Facilities Table of Contents 1. Overview 2. How do I manage my account? 3. Equipment Scheduling Workflow Overview 4. Equipment Scheduling Walk Through a. How do I access the list of calendars available for scheduling?

More information

Reference Manual. IQ System Database Manager Software

Reference Manual. IQ System Database Manager Software Reference Manual IQ System Database Manager Software Honeywell Analytics, Inc. 405 Barclay Blvd Lincolnshire, IL 60069 (800) 711-6776 (847) 955-8200 Fax (800) 995-4992 P/N 13-241 Version 6 27AUG2012 Note:

More information

Vodafone Email Plus. User Guide for Windows Mobile

Vodafone Email Plus. User Guide for Windows Mobile Vodafone Email Plus User Guide for Windows Mobile 1 Table of Contents 1 INTRODUCTION... 4 2 INSTALLING VODAFONE EMAIL PLUS... 4 2.1 SETUP BY USING THE VODAFONE EMAIL PLUS ICON...5 2.2 SETUP BY DOWNLOADING

More information

G3X Touch Pilot s Guide

G3X Touch Pilot s Guide G3X Touch Pilot s Guide SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS INTERFACE NAVIGATION FLIGHT PLANNING HAZARD AVOIDANCE ADDITIONAL FEATURES AFCS ANNUNCIATIONS & ALERTS APPENDIX INDEX Copyright 2014 Garmin

More information

SOFTWARE MANUAL. Please ensure that you read the instruction manual carefully before use. About software

SOFTWARE MANUAL. Please ensure that you read the instruction manual carefully before use. About software SOFTWARE MANUAL Please ensure that you read the instruction manual carefully before use Software Notes The attached software is a camera driver and image editing software tool for Windows. Under no circumstances

More information

Revision Number Revision Date Insertion Date/Initials 1 st Edition February 1992 2 nd Edition March 05, 2002

Revision Number Revision Date Insertion Date/Initials 1 st Edition February 1992 2 nd Edition March 05, 2002 GPS List of Effective Pages * Asterisk indicates pages changed, added, or deleted by revision. Record of Revisions Retain this record in front of handbook. Upon receipt of a revision, insert changes and

More information

? Index. Introduction. 1 of 38 About the QMS Network Print Monitor for Windows NT

? Index. Introduction. 1 of 38 About the QMS Network Print Monitor for Windows NT 1 of 38 About the QMS Network for Windows NT System Requirements" Installing the " Using the " Troubleshooting Operations" Introduction The NT Print Spooler (both workstation and server versions) controls

More information

Lenovo Miix 2 8. User Guide. Read the safety notices and important tips in the included manuals before using your computer.

Lenovo Miix 2 8. User Guide. Read the safety notices and important tips in the included manuals before using your computer. Lenovo Miix 2 8 User Guide Read the safety notices and important tips in the included manuals before using your computer. Notes Before using the product, be sure to read Lenovo Safety and General Information

More information

POINT OF SALES SYSTEM (POSS) USER MANUAL

POINT OF SALES SYSTEM (POSS) USER MANUAL Page 1 of 24 POINT OF SALES SYSTEM (POSS) USER MANUAL System Name : POSI-RAD System Release Version No. : V4.0 Total pages including this covering : 23 Page 2 of 24 Table of Contents 1 INTRODUCTION...

More information

Rev 06 1211. GSM base station. Installation instructions

Rev 06 1211. GSM base station. Installation instructions Rev 06 1211 GSM base station Installation instructions Output string format Baud rate 115200 bps Parity none Data bits 8 Stop bits 1 Flow control none The output string is a modified version of the Sureguard

More information

Using These Manuals. How to Use the. Software User Guide. Display examples: 1. Understanding How to Use Your Camera.

Using These Manuals. How to Use the. Software User Guide. Display examples: 1. Understanding How to Use Your Camera. Software User Guide For the safe use of your camera, be sure to read the Safety Precautions thoroughly before use. Types of software installed on your computer varies depending on the method of installation

More information

Kentico CMS 7.0 User s Guide. User s Guide. Kentico CMS 7.0. 1 www.kentico.com

Kentico CMS 7.0 User s Guide. User s Guide. Kentico CMS 7.0. 1 www.kentico.com User s Guide Kentico CMS 7.0 1 www.kentico.com Table of Contents Introduction... 4 Kentico CMS overview... 4 Signing in... 4 User interface overview... 6 Managing my profile... 8 Changing my e-mail and

More information

Fleet Manager II. Operator Manual

Fleet Manager II. Operator Manual Fleet Manager II Operator Manual Table of Contents Table of Contents Table of Contents 2 About this Publication 4 Trademarks 5 About Fleet Manager II 6 Contact BW Technologies by Honeywell 7 Getting Started

More information

HDS Gen2 RTM 4.0 software update

HDS Gen2 RTM 4.0 software update HDS Gen2 RTM 4.0 software update The HDS RTM 4.0 software update enables autopilot control of outboard motors and includes features for Jeppesen 4D charts. Outboard motor autopilot To use outboard autopilot

More information

Kansas City Scout. Subscriber s Guide. Version 1.0

Kansas City Scout. Subscriber s Guide. Version 1.0 Kansas City Scout Subscriber s Guide Version 1.0 November 15, 2010 TABLE OF CONTENTS 1 INTRODUCTION... 1-1 1.1 Overview... 1-1 2 SYSTEM DESCRIPTION... 2-1 2.1 System Overview... 2-1 2.1.1 Information Services...

More information

X Series Application Note 43:

X Series Application Note 43: X Series Application Note 43: Using the Remote Viewing & Web Pages of the X - Series & GR Series Recorders The Remote Viewing function of the X-Series and GR Series Recorders provide the user with the

More information

Microsoft Office. Mail Merge in Microsoft Word

Microsoft Office. Mail Merge in Microsoft Word Microsoft Office Mail Merge in Microsoft Word TABLE OF CONTENTS Microsoft Office... 1 Mail Merge in Microsoft Word... 1 CREATE THE SMS DATAFILE FOR EXPORT... 3 Add A Label Row To The Excel File... 3 Backup

More information

Bluetooth GPS with Navigation Software. Software Quick Start Guide (GBGPS201)

Bluetooth GPS with Navigation Software. Software Quick Start Guide (GBGPS201) Bluetooth GPS with Navigation Software Software Quick Start Guide (GBGPS201) 2004 IOGEAR. All Rights Reserved. PKG-M0129QS-SW IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks

More information

Operating Manual. Audi connect (myaudi) Operating Manual Audi connect (myaudi) Englisch 08.2015 AMH012720EA. Audi Vorsprung durch Technik

Operating Manual. Audi connect (myaudi) Operating Manual Audi connect (myaudi) Englisch 08.2015 AMH012720EA. Audi Vorsprung durch Technik Operating Manual Audi connect (myaudi) Operating Manual Audi connect (myaudi) Englisch 08.2015 www.audi.com Audi Vorsprung durch Technik 2015 AUDI AG AUDI AG works continuously to develop and further improve

More information

E-Loader Operation Manual

E-Loader Operation Manual Multi-Function Tools for E-MU Instruments Revision A _ Before you Begin - Read and follow the instructions given in the READ BEFORE INSTALLING file that comes with the E-Loader installer program. E-Loader

More information

Synthetic Monitoring Scripting Framework. User Guide

Synthetic Monitoring Scripting Framework. User Guide Synthetic Monitoring Scripting Framework User Guide Please direct questions about {Compuware Product} or comments on this document to: APM Customer Support FrontLine Support Login Page: http://go.compuware.com

More information

Kurz MODBUS Client User s Guide

Kurz MODBUS Client User s Guide Kurz MODBUS Client User s Guide Introduction The Kurz MODBUS Client program can be used to demonstrate how the Kurz MFTB and MFTA Series products can be used in a MODBUS protocol network. The program is

More information

G1000TM. Transponder Pilot s Guide

G1000TM. Transponder Pilot s Guide G1000TM Transponder Pilot s Guide Record of Revisions Revision Date of Revision Revision Page Range Description A B C D 04/30/04 11/29/04 05/3/05 07/20/05 5-1 5-7 5-1 5-7 5-1 5-5 5-1 5-5 Initial release.

More information

FTP Updates. Hiden Analytical Limited 420 Europa Boulevard Warrington WA5 7UN England. Tel: +44 (0)1925 445225 Fax: +44 (0)1925 416518

FTP Updates. Hiden Analytical Limited 420 Europa Boulevard Warrington WA5 7UN England. Tel: +44 (0)1925 445225 Fax: +44 (0)1925 416518 ANALYTICAL FTP Updates Hiden Analytical Limited 420 Europa Boulevard Warrington WA5 7UN England Tel: +44 (0)1925 445225 Fax: +44 (0)1925 416518 E-mail: info@hiden.co.uk Web site: http://www.hidenanalytical.com

More information

Configuration Backup Restore

Configuration Backup Restore Configuration Backup Restore June 2010 2010 Avaya Inc. All Rights Reserved. States and other countries. Adobe and Flash are either trademarks or registered trademarks in the United States and/or other

More information

RemoteWare Software Manager

RemoteWare Software Manager RemoteWare Software Manager Client User s Guide Version 2.0 RemoteWare Software Manager Client User s Guide Version 2.0 This document was prepared to assist licensed users of RemoteWare by XcelleNet, Inc.;

More information

Hypercom Key Loading and Management (HKLM) RS232 PPP Key Injection PC Setup Guide

Hypercom Key Loading and Management (HKLM) RS232 PPP Key Injection PC Setup Guide Hypercom Key Loading and Management (HKLM) RS232 PPP Key Injection PC Setup Guide Hypercom Corporation 8888 East Raintree Drive Scottsdale, Arizona 85260 USA Corporate Telephone: 480.642.5000 Corporate

More information

SonicWALL GMS Custom Reports

SonicWALL GMS Custom Reports SonicWALL GMS Custom Reports Document Scope This document describes how to configure and use the SonicWALL GMS 6.0 Custom Reports feature. This document contains the following sections: Feature Overview

More information

CONTENTS. Overview. Profile. Drones/UAVs. Batteries. Equipment. Customers

CONTENTS. Overview. Profile. Drones/UAVs. Batteries. Equipment. Customers User Manual 2016 CONTENTS Overview 0.1 Drone Logbook Overview... 5 0.2 Upgrading your Account... 6 0.3 Retrieving your Password... 7 0.4 Changing Your Password... 7 0.6 Main Dashboard... 7 Profile 1.1

More information

Microsoft SQL Database

Microsoft SQL Database This TechNote applies to MaxSea TimeZero Navigator and Explorer v1.9.5 and above Description: MaxSea display the following error when starting (in Navigation or Home Planning): Resolution: MaxSea TimeZero

More information

Installation & Licensing Guide. AquiferTest Pro. An Easy-to-Use Pumping Test and Slug Test Data Analysis Package

Installation & Licensing Guide. AquiferTest Pro. An Easy-to-Use Pumping Test and Slug Test Data Analysis Package Installation & Licensing Guide AquiferTest Pro An Easy-to-Use Pumping Test and Slug Test Data Analysis Package Table of Contents Software Maintenance and Support... 3 How to Contact SWS... 3 System Requirements...

More information

S TEC. List of Effective Pages. Record of Revisions

S TEC. List of Effective Pages. Record of Revisions List of Effective Pages * Asterisk indicates pages changed, added, or deleted by current revision. Retain this record in front of handbook. Upon receipt of a Record of Revisions revision, insert changes

More information

GTX 330. Mode S Transponder. pilot s guide

GTX 330. Mode S Transponder. pilot s guide GTX 330 Mode S Transponder pilot s guide Copyright 2002, 2007 Garmin Ltd. or its subsidiaries All Rights Reserved Except as expressly provided herein, no part of this manual may be reproduced, copied,

More information

CIRRUS AIRPLANE MAINTENANCE MANUAL

CIRRUS AIRPLANE MAINTENANCE MANUAL All AUDIO INTEGRATING 1. DESCRIPTION This section covers the portion of the system which controls the output of the communications and navigation receivers into the flight crew headphones and speakers,

More information

Garmin touchscreen avionics are redefining what it means to fly with your fingertips.

Garmin touchscreen avionics are redefining what it means to fly with your fingertips. G T N s e r i e s Garmin touchscreen avionics are redefining what it means to fly with your fingertips. What began back in 1998 with the debut of Garmin s best-selling GNS 430/530 series of GPS/Nav/Comm

More information

ROM ACCESS CONTROL USER S MANUAL

ROM ACCESS CONTROL USER S MANUAL ROM ACCESS CONTROL USER S MANUAL Manual Software Pro-Access Page: 1 PRO-ACCESS SOFTWARE GUIDE PRO-ACCESS SOFTWARE GUIDE 1 0. INTRODUCTION 3 1. INSTALLIG THE SOFTWARE 4 2. SOFTWARE OPERATORS AND COMPETENCIES.

More information

ADC SWATCH (v3.0) Switch Monitoring Software) User Manual)

ADC SWATCH (v3.0) Switch Monitoring Software) User Manual) ADC SWATCH (v3.0) Switch Monitoring Software) User Manual) Content Page INTRODUCTION... 1 Revision History... 1 Trademark Information... 1 1 OVERVIEW... 2 1.1 System Requirements... 2 2 INSTALLATION...

More information

Sierra Wireless AirCard Watcher Help for Mac OS X

Sierra Wireless AirCard Watcher Help for Mac OS X Sierra Wireless AirCard Watcher Help for Mac OS X Sierra Wireless AirCard Watcher allows you to manage and monitor the connection between your modem and the network. With Watcher, you can: Determine signal

More information

AUDIO INTEGRATING. EFFECTIVITY: All

AUDIO INTEGRATING. EFFECTIVITY: All All AUDIO INTEGRATING 1. DESCRIPTION This section covers the portion of the system which controls the output of the communications and navigation receivers into the flight crew headphones and speakers,

More information

[INSTALLING THE M2SYS BIOMETRIC SCANNING SYSTEM]

[INSTALLING THE M2SYS BIOMETRIC SCANNING SYSTEM] Installing the M2SYS BIOMetric Scanning System 2009 Fellowship Technologies, LP [INSTALLING THE M2SYS BIOMETRIC SCANNING SYSTEM] CONSULTING & DELIVERY SERVICES 7/22/2010 1 TABLE OF CONTENTS 2 Figures Index...

More information

Smart Control Center. User Guide. 350 East Plumeria Drive San Jose, CA 95134 USA. November 2010 202-10685-01 v1.0

Smart Control Center. User Guide. 350 East Plumeria Drive San Jose, CA 95134 USA. November 2010 202-10685-01 v1.0 Smart Control Center User Guide 350 East Plumeria Drive San Jose, CA 95134 USA November 2010 202-10685-01 v1.0 2010 NETGEAR, Inc. All rights reserved. No part of this publication may be reproduced, transmitted,

More information

ExpressShipper UK User Guide

ExpressShipper UK User Guide ExpressShipper Quick User Guide ExpressShipper Section 0 Page 1 of 63 Section 1: Structure of the User Guide In this section This section contains the following topics: Topic See Page What is the purpose

More information