EVELYN TRADE PLASTIC MOLDING AND TRADING LTD COMPANY INTRODUCTION
|
|
- Arleen Ellis
- 7 years ago
- Views:
Transcription
1 EVELYN TRADE PLASTIC MOLDING AND TRADING LTD COMPANY INTRODUCTION Owner: Ferenc Szóda Address: H Esztergom- kertváros, Lakópark 5. Tel/fax: Mob: (Hungarian) (English) Web:
2 Introduction of the company The ac'vity of the company began in 1980 with plas'c processing on an ar'san level. Then in 1999, the company called Evelyn Bt. was established. The current premise of the company was bought back then and manufacture began to grow. In 2008 the company structure was changed from Evelyn Bt. to Evelyn- Trade Ltd. Later, in July 2009 the MSZ EN ISO 9001:2009 standards were adopted into the working processes. These will be shortly developed into TS. Main aci'vies: Plas'c processing (moulding and rubber processing) Produc'on and assembly Research and consul'ng of different produc'on technologies Raw material experiments Joint services: Planning and produc'on of moulding forms Raw material purchasing Produc'on of prototypes CAD/CAM prototyping in 3D Assembly of complex units Repara'on of plas'c parts Premise: company owned 600 m2 workshop company owned 400 m2 store- house company owned 2000 m2 free area Plastic molding machinery: ENGEL ES 100/200 1 piece ENGEL ES 1300/250 1 piece ENGEL ES 75 ST 2 pieces ENGEL ES 250/600 1 piece Somer 1000/300 1 piece Arburg mini 15gr 1 piece 100/60 gr developed by ourselves for special purposes 1 piece 100/60 gr ver'cal developed by ourselves for special purposes 1 piece Supporting equipments: Drying boxes 1m3 3 pieces Gullet dryer 2 pieces Tempering equipments 2 pieces Central cooling system 1 piece Grinders 3 pieces Forwarding equipments: Manual fork li^ 1 piece Electric fork li^ 1 piece Van (1.5t) 1 piece
3 Parameters of machinery: Minimal amount of injec'on: 5 gr Maximal amount of injec'on: 600 gr Minimal measure of molding tool: 100x100x80 mm Maximal measure of molding tool: 800x550x500 mm Maximal tool opening: 500 mm Characteristics of the machinery: 1 piece 1-15 gr 2 pieces 5-60 gr 2 pieces gr 1 piece gr 1 piece gr 2 pieces gr We process the following materials: LDPE, HDPE, PS ABS, PA,POM, TPU, TPE, EUA etc.. Filled and enhanced plas'cs, such as: ü carbon fiber filled PAG, PA6.6. ü glass fiber filled PAG,PA 6.6, PP ü teflon filled POM ü wood powder filled PP (max 20%) ü plas'cs mixed with fireproof addi'ves ü plas'cs mixed with UV- proof addi'ves ü injec'on of adhesion modified TPE onto other plas'cs We are able to process in one shift: on the 600 gr machine maximum 300 kg, on the 300 gr machine maximum 150 kg, on the 200 gr machine maximum 100 kg, on the 80 gr machine maximum 40kg of raw material. Working schedule: according to the needs 1, 2 or 3 shi^s. Delivery guarantee We had no insufficiency regarding quality or delivery deadlines for a long 'me, which is proven by the aiached partner qualifica'ons and the quality policy of the Evelyn Trade K^. In the case of pre- produc'on, the company is ready to produce and store the products for 1-4 weeks without any addi'onal costs in order to meet any required delivery deadlines. We are also able to fulfill any packaging and logis'cs requirements
4 References: A.L.S. Schmiertechnik - D- Sindelfingen (automa'c greasing unit, delivered to DE and Canada) P.O.S. Almási K=. - Budapest (marke'ng, merchandising and POS materials, shel^rays, for the following companies: Eskimo, Schöller and Unilever) MMG Autóalkatrész és Domotechnikai Zrt. - Szekszárd (electronic parts for cars) Q.P. Qualita've Produc'on Rt. - Győr (parts for the produc'on line in the Audi factory in Győr) André Media Hungary K=. - Budapest (cash poster, cash desk separators for Lidl supermarket chain) Innomed Medical Zrt. - Budapest (produc'on of housings of medical devices, e.g. portable EKG) Kühl K=. - Tokod (refrigerator parts) GE Healthcare - Budaörs (maintanence and repair of housings of medical devices, e.g. CT / MRI) Rimóczi és Tsa K=. - Budapest (produc'on of filters for medical and engineering use) Products produced by EvelynPlast: electric parts housings of instruments earplugs, membranes furniture parts, handles and foo'ngs for industrial use folding wellness slippers plas'c cups, cutleries, plates plas'c boxes in different sizes Teflone filled POM parts (even injected onto metal parts) cases for glasses plas'c numbers with fixing studs (0-9) warning boards containers for fiongs, part and screws with plas'c drawers handles overmoulded on screws pipe plugs current- carrying plas'c and rubber parts
5 Attachments: Maps Partner sa'sfac'on index ISO cer'ficate Esztergom- kertváros is located 45 km from Budapest
6 Partner sa'sfac'on index from ALS Schmiertechnik, Germany
7 ISO cer'ficate
Product planning, tool production, plastic injection moulding, lease-work, used machines
Product planning, tool production, plastic injection moulding, lease-work, used machines Introduction Plastic Product Hungary Kft. was founded in 2002 for plastic production. Our aim is to fulfil our clients
More informationFredriksons conveyor systems handle goods with a width from 20 mm up to 600 mm.
Conveyor Solutions Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from one
More informationH-8400 Ajka, Gyár u. 35. Tel.: +36-88-510-510, Fax: +36-88-211-815 E-mail: igazgatosag@ae-plasztik.hu
H-8400 Ajka, Gyár u. 35. Tel.: +36-88-510-510, Fax: +36-88-211-815 E-mail: igazgatosag@ae-plasztik.hu LOCATION Prague 5 hours Warsaw 9 hours Moscow 22 hours Munich 6.5 hours Ljubljana 4 hours Airports:
More informationBringing good things ahead
Bringing good things ahead Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from
More informationH-8400 Ajka, Gyár u. 35. Tel.: +36-88-510-510, Fax: +36-88-211-815 E-mail: ae-plasztik@ae-plasztik.hu
H-8400 Ajka, Gyár u. 35. Tel.: +36-88-510-510, Fax: +36-88-211-815 E-mail: ae-plasztik@ae-plasztik.hu LOCATION Prague 5 hours Warsaw 9 hours Moscow 22 hours Munich 6.5 hours Ljubljana 4 hours Airports:
More informationWe realise your visions- take us at our word! Präsentation Firma 1 A Autenrieth GmbH & Co. KG
We realise your visions- take us at our word! That s us That s how we work Customer demand advice conzeption, prototyping service logistics tooling production Our history 1977 Foundation of business named
More informationOverview. History of Balda Group Company structure Balda Group Locations Balda Healthcare Core technologies Quality Our spirit The markets
Page 2 Company Presentation 2014 Overview History of Balda Group Company structure Balda Group Locations Balda Healthcare Core technologies Quality Our spirit The markets >> We improve peoples quality
More informationNingbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes,
Ningbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes, STEREOLITHOGRAPHY (SLA) Selective Laser Sintering (SLS) RTV MOLDING AND CAST URETHANE PROTOTYPES Tel : +86 574
More informationRapid Prototyping Technologies. May, 2016
Rapid Prototyping Technologies May, 2016 WE HAVE ALL THE NECESSARY TOOLS TO ENSURE THE FINAL SUCCESS OF YOUR PROTOTYPE. Andaltec can help you in all the steps, from the design to fully finished prototype
More informationIntroduction of ZF-Hungary Ltd. T-Eger ZF Hungária Kft.
Introduction of ZF-Hungary Ltd. T-Eger ZF Hungária Kft. 1 2014 T-Eger, ZF Hungária Kft. Company History, ZF Group Milestones 1915 Foundation of Zahnradfabrik GmbH in Friedrichshafen by the Luftschiffbau
More informationThermostatic valve Type AVTA
MAKING MODERN LIVING POSSIBLE Data sheet Thermostatic valve Type AVTA Thermostatic valves are used for proportional regulation of flow quantity, depending on the setting and the sensor temperature. The
More information10 Golden Rules in EcoDesign
10 Golden Rules in EcoDesign Associate Professor, Dr. Conrad Luttropp, [conrad@md.kth.se], KTH Machine Design, SE-100 44 Stockholm, Sweden, Phone: +46 8 790 7497 fax: +46 8 202287 First it must be stated
More informationOperating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
More informationVolkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 17 Engine-Lubrication system (Page GR-17)
17 Engine-Lubrication system (Page GR-17) Lubrication system components, removing and installing Oil pan, removing and installing Oil pressure and oil pressure switch, checking Dynamic oil pressure warning
More information1. Injection Molding (Thermoplastics)
1. Injection Molding (Thermoplastics) l Molding: Injection (thermoplastics) INJECTION MOLDING of thermoplastics is the equivalent of pressure die casting of metals. Molten polymer is injected under high
More informationPlastics: An Energy-Efficient Choice
Plastics: An Energy-Efficient Choice Introduction Plastics are derived from petroleum and natural gas. With increased public awareness and concern about waste and energy issues, some have questioned whether
More informationProduct Information Miniature Safety Edges
Product Information Safety Edges (EKS) the "invisible" protection against trapping and nipping Safety Edges... Tiny dimensions, enormous reliability. The are the result of consistent further development
More informationALLROUNDER 420 C GOLDEN EDITION
Facts and figures ALLROUNDER C GOLDEN EDITION Distance between tie bars: x mm Clamping force: 1 kn Injection unit (acc. to EUROMAP): 29 www.arburg.com C GOLDEN EDITION Machine dimensions 85 33 125 195
More informationNORTHFIELD METAL PRODUCTS
NORTHFIELD METAL PRODUCTS CUSTOM METAL & PLASTIC COMPONENT MANUFACTURING SINCE 1974 PROGRESS through engineering & design WHO WE ARE Northfield Metal Products, located in Waterloo Ontario Canada, has been
More informationMANAGING DIRECTOR András Gerber. BUSINESS DEVELOPMENT Balázs Fábián
1 ORG CHART OF VTEP PRODUCTION József Nyers Logistics Zoltán Pozsega BRAUN MFG László Hirsch DELONGHI MFG Péter Karlovics MFG UNIT No. 8. Bálint Toronyi BATTERY MFG Tibor Juhász PHILIPS MFG Gábor Rauf
More informationCriteria Sheet for: Plastic Screw Caps
Page 1 of Criteria Sheet for: Content: 1. Preliminary note 3 2. Specification Criteria of: 4 2.1. Introduction 4 2.2. Geometrical and dimensional accuracy 5 2.2.1. Main dimensions D, d, Di, H, 5 2.2.2.
More informationChains. Product Catalogue. Bringing Good Things Ahead
Chains Product Catalogue Bringing Good Things Ahead Contents Welcome 3 Developement of plastic chains 4 FT70 5 RT114 6 RTF70 7 RTF114 8 FT54 9 KLDH50 10 Welcome to the world of Conveyor Solutions Fredriksons
More informationmedical application products
medical application products BIWI at it's customer's service ISO 9 0 01 / ISO13485 BIWI develops your projects from A to Z, according to your requirements. R&D phase Materials development via customised
More informationPVC in automotive. Examining the trends and drivers behind the growth of PVC for dashboard applications
PVC in automotive Examining the trends and drivers behind the growth of PVC for dashboard applications Summary Introduction The evolution of PVC-slush: past & present How PVC meets the increasingly stringent
More informationRe-board Accessories
Re-board Accessories Plastic Screws Plastic screws specially developed for 16 mm Re-board, but works with most thicknesses. A special version comes with a loop for hanging (only available in transparent
More informationMeeting Tomorrow s Standards Today
Meeting Tomorrow s Standards Today One of the best injection molding companies in the U.S. Centrally located to major transportation networks to ensure timeliness Large enough to have the right equipment
More informationManual. Solar Fountain Mobile Phone Charger
EN Manual Solar Fountain Mobile Phone Charger Copyrights 2008 Victron Energy B.V. All Rights Reserved This publication or parts thereof may not be reproduced in any form, by any method, for any purpose.
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationwww.steelformcatering.com
www.steelformcatering.com catering cat e r i n g We are specialized in the production and sub furniture of components for mechanical industry, sector for which we even furnish advice and collaborate in
More informationNAN YA NYLON 66 Engineering Plastics. Flame Retardant.High Toughness.Heat Resistant. Impact Resistant.Moldability.Low Warpage
NAN YA NYLON 66 Engineering Plastics Flame Retardant.High Toughness.Heat Resistant. Impact Resistant.Moldability.Low Warpage Introduction NAN YA FR-NYLON 66 has water absorption propertieslike other nylons.
More informationPRECISION PROTOTYPING THE ROLE OF 3D PRINTED MOLDS IN THE INJECTION MOLDING INDUSTRY
By Lior Zonder, Applications Team Leader Nadav Sella, Solutions Sales Manager, Global Field Operations Injection molding (IM) the process of injecting plastic material into a mold cavity where it cools
More informationINDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK
INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single
More informationForm 0.5 chair, 2805 and 2806
Page 1(8) Form 0.5 chair, 2805 and 2806 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface
More informationOperating Instructions Hand pallet trucks HU Profi. Issue 08.2000
Operating Instructions Hand pallet trucks HU Profi Issue 08.2000 Index 1 Introduction 1.1 Product description 1.2 General information on service and maintenance 1.3 Spare parts 1.4 Dimensions 2 Correct
More informationKursus i Produktions- og materialeteknologi
Kursus i Produktions- og materialeteknologi Plastsprøjtestøbning / Injection Molding Basics Short history of plastics 1862 first synthetic plastic 1866 Celluloid 1891 Rayon 1907 Bakelite 1913 Cellophane
More informationHow To Run A Plant In Kiskunf\U00E9Legyh\U00E1Za
A short history of the company 1961. the first plastic processing plant named Bács-Kiskun Megyei Mőanyagfeldolgozó Vállalat (Plastic Processing Company of Bács-Kiskun County) was founded in Kiskunfélegyháza
More informationQuality Expertise Affordable prices
MILESTONES Marostech Kft. is founded as a German- Hungarian joint venture 100% of the company becomes Hungarian-owned Implementing ISO 9001 quality management system Purchasing a machining center and some
More informationMAKING MODERN LIVING POSSIBLE. Thermostatic valve AVTA. Technical brochure
MAKING MODERN LIVING POSSIBLE Thermostatic valve AVTA Technical brochure 2 IC.PD.500.A3.02-520B3728 Danfoss A/S 07-2009/ RA-MC/mr Contents Page Features............................................................................................4
More informationGuidelines for Industrial Internships as per November 18 th 2008
Guidelines for Industrial Internships as per November 18 th 2008 Special section of the study and examination regulations (SPO) of the Esslingen University of Applied Sciences to regulate the voluntary
More informationBURG Manufacturing. Competence in die casting.
BURG Manufacturing. Competence in die casting. Take advantage of the know-how of BURG in producing your zinc die cast components. Production service from one source: Development and mould construction
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationVisions become real. Temperature control and cooling systems. The innovative and reliable solution
Temperature control and cooling systems The innovative and reliable solution With our PulseTemp equipment you have the option of up to 72 cooling circuits in the impulse cooling, temperature control, temperature
More informationThis unit is a pump that will clear the waste from a domestic shower and washbasin, bath, washing machine, glass washer and a sink.
1. Description This unit is a pump that will clear the waste from a domestic shower and washbasin, bath, washing machine, glass washer and a sink. The unit will start automatically. Please pay particular
More informationCraft and Design Application of Injection Moulding (Mobile Phone)
Craft and Design Application of Injection Moulding (Mobile Phone) 5700 Summer 1999 HIGHER STILL Craft and Design Application of Injection Moulding (Mobile Phone) Support Materials This Support Material
More informationp l a s t i c i n j e c t i o n m o l d i n g p a r t 1 p r o c e s s, m o l d a n d m a c h i n e e r i k d e l a n g e
p l a s t i c i n j e c t i o n m o l d i n g p a r t 1 p r o c e s s, m o l d a n d m a c h i n e e r i k d e l a n g e H R O R o t t e r d a m B r n o U T j o i n t p r o j e c t 1 plastic injection
More informationSITRANS F flowmeters SITRANS F M
Overview Integration The complete flowmeter consists of a flow sensor and an associated transmitter MAG 5000, 6000 or 6000 I. The flexible communication concept USM II simplifies integration and update
More informationABEL Positive Displacement Pumps
Membrane Pumps Solids Handling Pumps High Pressure Pumps Marine Pumps ABEL Positive Displacement Pumps Units for Process Engineering and optimal Solids Transport The International Experts ABEL Positive
More informationIndustry Analysis and Skills Foresight Appendix 1 Printing and Packaging Industry
Industry Analysis and Skills Foresight Appendix 1 Printing and Packaging Industry INDUSTRY ANALYSIS Page 1 of 10 Introduction The printing and packaging companies in Trinidad and Tobago are involved in
More informationFIRST STOP SAFETY 1 PAT-IT. Portable Appliance Tester. User Manual. Issue 1.6
FIRST STOP 1 PAT-IT Portable Appliance Tester User Manual Issue 1.6 First Stop Safety 11 Glaisdale Road Northminster Business Park Upper Poppleton York YO26 6QT t: 01904 791050 f: 01904 780054 e: info@firststopsafety.co.uk
More informationPHOENIX TAPWARE. Gloss. Shower/Wall Mixer RRP: $264.00. Product Code: Available Finishes: GS780. Chrome MATCH WITH...
PHOENIX TAPWARE RRP: $264.00 Stylish Premium Chrome Finish Entire Range Available Phoenix Gloss Shower/Wall Mixer Product Code: Available Finishes: GS780 Chrome MATCH WITH... Click here to download HIGH
More informationThe India Thermit Corporation
The India Thermit Corporation World Leaders in Rail Welding Alumino - Thermic Welding Flash Butt Welding The Company The India Thermit Corporation (ITC) is the world's largest executor of rail welds. We
More informationtire inflator with pressure gauge
tire inflator with pressure gauge Model 95583 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks
More informationKEEP FOR FUTURE REFERENCE MRTALP VERTICAL LIFT BAR READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT
KEEP FOR FUTURE REFERENCE INSTRUCTIONS P.O. Box 368 908 West Main Laurel, MT USA 59044 phone 800-548-7341 phone 406-628-8231 fax 406-628-8354 International Version MODEL NUMBER: LB10VLB MRTALP VERTICAL
More informationAPPLYING RAPID TOOLING FOR INJECTION MOLDING & DIE CASTING From a RT users perspective
APPLYING RAPID TOOLING FOR INJECTION MOLDING & DIE CASTING From a RT users perspective Glenn Anderson Senior Engineer, Research and Development Southco, Inc. RPA/SME Technical Forum on Rapid Tooling 20
More informationEUROPLAST S.P.A. 31025 S. LUCIA DI PIAVE - Via Gorizia, 7 - (Tv) - Italy. Tel. +39 0438.4697 - Fax +39 0438.460766. www.europlast.
EUROPLAST S.P.A. 31025 S. LUCIA DI PIAVE - Via Gorizia, 7 - (Tv) - Italy Tel. +39 0438.4697 - Fax +39 0438.460766 www.europlast.it e-mail: europlast@europlast.it 09/05 drainage system EXPORT COMPANY PROFILE
More information6 LED colours: White Blue Green Red Yellow Amber
Illuminated contours can be found in many places on petrol stations and buildings of industrial, commercial and service companies. Such light bands visually emphasize the contours of a building during
More informationSeismic Installation for Attic Storage System
Your Performance Partner Seismic Installation for Storage System CONTENTS SSafety Precautions................................. 2 Required Tools..................................... 2 Parts and Fastener
More informationAlfra Rotabest 100 Metal Core Drilling Machine. Operation Manual
Alfra Rotabest 100 Metal Core Drilling Machine Operation Manual 06/2005 1. Technical Data Prod. No.: 18630 Name : Rotabest 100 Input: Load rpm: 1800 Watt 110/175/245/385 rpm Tool Holder : MT 3 Coolant
More informationTECHNICAL SHEET RELATED TO DRAWN PRODUCTS OBTAINED BY A RECOVERY PROCESS OF ECO LIFE SRL ECOLOGICAL DRAWN PRODUCTS
TECHNICAL SHEET RELATED TO DRAWN PRODUCTS OBTAINED BY A RECOVERY PROCESS OF ECO LIFE SRL ECOLOGICAL DRAWN PRODUCTS deriving from post-consuming waste sorting of solid urban waste TECNICAL PRODUCT SHEET
More informationENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING
ENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING MERSEN A world leader committed to Renewable Energies A world leading supplier of electrical protection, sealing,
More informatione-mobility Special cables for electric vehicles Coroplast Fritz Müller GmbH & Co. KG Tapes Cables Cable Assemblies
www.echtzeit.com e-mobility Coroplast Fritz Müller GmbH & Co. KG Tapes Cables Cable Assemblies Special cables for electric vehicles Wittener Straße 271 D-42279 Wuppertal Phone +49(0)202.2681.228 Fax +49(0)202.2681.360
More informationAPI Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More informationLatin American Experience
Latin American Experience Cedar is global management consulting firm with a network of offices in 15 countries, having served over 800 clients since 1985. Formerly part of Renaissance Worldwide, a $1 Billion
More informationLinear Recirculating Roller Bearing and Guideway Assemblies. Series RUE-E / RUE-E-KT-L
Linear Recirculating Roller Bearing and Guideway Assemblies Series RUE-E / RUE-E-KT-L C o n c e p t Linear Recirculating Roller Bearing and Guideway Assemblies RUE-E / RUE-E-KT-L: Optimum Running Characteristics
More informationHOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
More informationMACHINERY MANUFACTURING
INDUSTRY AT A GLANCE: MACHINERY MANUFACTURING Nature of the Industry Goods and services. The development and deployment of Quick Reference machinery was responsible for one of the great advances in human
More informationWorkshop Compressors CLASSIC Series
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your CLASSIC workshop compressor? Quality results can be achieved only by using
More informationProfile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
More informationINSTALLATION INSTRUCTIONS PART NUMBER:
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-475B (Blue Finish) 21-475C (Gun Metal Grey Finish) 21-475P (Vacuum Metalized Chrome-VMC) 21-475R (Red Finish)
More informationInsideManufacturing. Close Brothers Asset Finance Manufacturing Newsletter Issue 1. 04 Sale and HP Back 06 Case Study 3 Dimensional
InsideManufacturing Close Brothers Asset Finance Manufacturing Newsletter Issue 1 02 Welcome 03 Case Study Metal Co Ltd 04 Sale and HP Back 06 Case Study 3 Dimensional 07 Case Study Nottinghamshire Recycling
More informationTerminal Boxes Series 8146
Series > Enclosures in shock-resistant glass fibre reinforced polyester resin > basic enclosure sizes various heights > Fitted according to the customer's requirements > For terminals up to max. 00 mm
More informationOperations Manual Blast Chiller
Operations Manual Blast Chiller ADE- 2039-A Page 1 of 14 Contents Page 1 What is the Adande System 3 2 Adande Technology Explained 3 3 EC Declaration of Conformity 4 4 Storage of Product 5 5 Operating
More informationMANUFACTURING SERVICES
MANUFACTURING SERVICES Good product idea, but need: Concepts? prototyping? competitive manufacturing? certification? aggressive global purchasing? marketing? sales channel development? distributor recruitment?
More informationBIS Gulv / Radiator Beslag
O BIS Gulv / Radiator Beslag BIS Manifold Fixings BIS Manifold Fixing 2 BIS Pipe Protection BIS Protection Plate BIS Two-Part Floor Bend BIS Floor Bend BIS Bend Guider BIS Protective Pipe BIS PE Flexible
More information3D Sputtering System Fully automated
3D Sputtering System Fully automated S8+ Sputtering Technology by Tapematic Built on the ability to draw on the best that the world has to offer, and to develop innovative products with anticipation of
More informationMANUFACTURING THE FUTURE
Paul Miller 803-554-3590 paul.miller@3dsystems.com MANUFACTURING THE FUTURE PAUL MILLER DIRECTOR OF SALES WWW.3DSYSTEMS.COM NYSE:DDD 2013 3DSYSTEMS A 3D PRINTER FOR YOU RESULTING IN UNMATCHED 3D PRINTER
More informationStreets ahead of Injection Molding
One-meter long strips in ABS with a Y cross-section and end caps (photos: IB Steiner) Streets ahead of Injection Molding Exjection. A newly-developed process combines the advantages of extrusion and injection
More informationROUTER TABLE INSERT ASSEMBLY AND OPERATING INSTRUCTIONS
ROUTER TABLE INSERT 94331 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2006 by Harbor Freight Tools. All
More informationPR11 Plastic Repair, Adhesive
Uniform Procedures For Collision Repair PR11 Plastic Repair, Adhesive 1. Description This procedure describes methods for making adhesive repairs to most types of exterior and interior automotive plastics.
More informationPresentation of. factory at Segmon, Grums municipal.
Presentation of factory at Segmon, Grums municipal. Office building Office building Office building Storehouse Space for annex Preparatory work with plinths for the extension of sheet metal building by
More informationReadyKart Mobile Processing Station Instructions for Use
GE Healthcare Instructions 28-9606-47 AB ReadyKart Mobile Processing Station Instructions for Use Contents ReadyToProcess 1 Introduction... 1 2 General Description... 2 3 Description of Components... 4
More informationALFRA Rotabest Piccolo 32/50 Weldon Metal Core Drilling Machine. Operation Manual
ALFRA Rotabest Piccolo 32/50 Weldon Metal Core Drilling Machine Operation Manual 06/2005 1 1. Technical Data Prod. No.: 18550 Name : Rotabest Piccolo 32/50 Weldon Input: Load rpm: 1050 Watt 400 rpm Tool
More informationBASIS RANGE TMB SERIES
BASIS RANGE SERIES magnetic driven pumps BASIS The pumps belong to Argal s BASIS range and feature, single stage, centrifugal impeller and magnetic drive. The range of pumps includes five models to deliver
More informationOur references. Direct-Line Ltd. H-2330-Dunaharaszti Jedlik Ányos str. 14 email: info@dldh.hu homepage: www.dldh.hu
Our references Direct-Line Ltd. H-2330-Dunaharaszti Jedlik Ányos str. 14 email: info@dldh.hu homepage: www.dldh.hu Our core activities Integrated engineering design Ultra precision processing technology
More informationOperating and Installation Instructions
Operating and Installation Instructions System Drawer ESS 2062 To prevent accidents and en - US, CA appliance damage, read these instructions before installation or use. M.-Nr. 07 342 360 Contents IMPORTANT
More informationMICRO FIBER OPTIC CABLE BLOWING MACHINE WITH ELECTRIC
ELECTROFOK MACHINES MICRO FIBER OPTIC CABLE BLOWING MACHINE WITH ELECTRIC fokmachine.com FIBER OPTIC CABLE BLOWING MACHINES ABOUT US Our company ever since its incorporation in the telecommunication sector
More informationEconomy Combo Heat Press Manual Model No.: ECH-800
Economy Combo Heat Press Manual Model No.: ECH-800 CONTENTS I. Assembly Drawing -----------------------------------------------------------------------------------2 II. Technical Parameters ------------------------------------------------------------------------------2
More informationMRK/ 1-12-2011 Page 1(9) 2 Description and assessment of the Production process. 3 Description and assessment of the Surface Treatment Methods
Page 1(9) Plus+ 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface Treatment Methods 4
More informationFRIULFORGIA Srl COMPANY PRESENTATION. We shape your world
FRIULFORGIA Srl We shape your world COMPANY PRESENTATION E-mail: info@friulforgia.it - Web: www.friulforgia.it 1 FRIULFORGIA Foundation and facts Friulforgiaisa privatelyheldcompany, whichstarteditsactivitiesin
More informationSITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS drive system for powerful forces on a short stroke hydraulic actuation closing force
More informationIntroduction FRIGERIO ETTORE spa Lecco (Italy) Rev.09 1 / 19
Introduction FRIGERIO ETTORE spa Lecco (Italy) Rev.09 1 / 19 HISTORY Frigerio Ettore S.p.A. is a family run company founded in 1948 with a strong presence in the European metal working market. Frigerio
More informationTerminal Boxes in Glass Fiber Reinforced Polyester (GRP)
Features Variants options Glass fiber reinforced polyester (GRP) enclosures Suitable for installation in Zones 0, 1, 2, 21 and 22 Certified Ex e, Ex ia and Ex tb 16 enclosure size options Various terminal
More informationScotch-Weld PUR Easy 250 Adhesive Applicator
Scotch-Weld September, 2014 Product Description PUR Easy 250 Applicator is a self contained pneumatic applicator designed to dispense 1/10 th gallon(300ml) cartridges of 3M PUR adhesives. PURs are a family
More informationDevelopment/ 3D Modelling Calculations and Sizing Design Eco-design Expert knowledge Software Virtual prototyping Simulation.
BUSINESS FIELDS REPRESENTED: Studies and development Equipment supply Raw materials Additive manufacturing Rapid prototyping Design and manufacture of rapid tooling and / or prototype molds Laboratory
More informationSaferand easierinstallation
EN 85-07 Saferand easierinstallation IföSigninstallationsystem andifösignbuilt-incistern www.ifosanitar.com/sign Aneffectivesolution withmanyadvantages. Ifö Sign installation system makes life a little
More informationECOCIAT. Domestic hot water heat recovery unit
Heat recovery unit Domestic hot water High energy efficiency with R410A Compact and quiet Scroll compressors Brazed-plate heat exchangers Heating Heat recovery ENVIRONMENTALLY HFC R410A PROTECTION DE FRIENDLY
More informationThe Coating Machinery Experts Supplier Questionnaire
Date: Completed by: Company Data 1.1 General Data Full company name, legal form and address: Short form of company name: Country: USt. ID/ VAT Reg./ N.IVA/ NIPIC/ UID Nr./ ID TVA: Company homepage: www.
More informationSPREFIX SPRAY INSULATION _ in the marine market.
SPREFIX SPRAY INSULATION _ in the marine market. A self-adhesive glass or stone wool, sprayed directly onto surface.. Easily applied to wood, steel, plastic or other surfaces without any mechanical fasteners
More information