Amphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors Series C 16-1/ C 16-3

Transcription

1 Amphenol Amphenol-Tuchel Electronics GmbH Circular Connectors Series C 6-/ C 6-3

2 The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation. With our own global presence we offer our customers exceptional technical support and service in the areas of development, production and distribution. Amphenol-Tuchel Electronics GmbH has a successful history as a partner to our customers and sets standards for connector technology. Quality From the beginning of the development process, Amphenol-Tuchel Electronics GmbH gives quality considerations the top priority. Meeting customer requirements is the main focus of the product development process. Interdisciplinary project teams with diverse backgrounds from marketing, product engineering and production guarantee the development and production of robust and reliable connector solutions. Our quality accessment begins with the initial contact to the customer and extends through the life of the product. A satisfied customer is the measure of our success. Amphenol-Tuchel Electronics GmbH is ISO 900, QS 9000 and VDA 6. certified. We strive to use environmentally friendly processes that minimize the waste of natural resources and introduction of toxins into the environment. Amphenol-Tuchel is an ISO 400 certified company. General information We reserve the right to change the design due to improvement in quality, development or production requirements. With this release all former releases are no longer valid. This catalogue must not be used in any form or manner without our prior approval in writing (Copyright Law, Fair Trading Law, Civil Code). Amphenol

3 Content Page General information Technical information 4 Remarks / Safety classification 7 Series C 6- View 8 Product description Order information Approvals Characteristics Derating curves Mounting instructions Male cable connectors 9 0 Series C 6-3 Female receptacles Female cable connectors Male receptacles Accessories View Product description Order information Approvals Coding system Characteristics Derating curves View of connector style Mounting instruction Shell size Male cable connectors Female receptacles Female cable connectors Male receptacles Accessories EMI versions Shell size Male cable connectors Female receptacles Female cable connectors Male receptacles Accessories Crimp contacts pin 33 Crimp contacts socket 34 Part No. system for crimp contacts 35 Summary of Part Numbers 36 Amphenol 3

4 C 6- / C 6-3 Technical Information Termination methods Screw connection Screw clamps are designed acc. to EN /VDE Chart below shows the screw size depending on wire size and the required clamping and testing torque. Chart Wire size (mm ),5, Screw size M,6 M 3 M 3 M 3,5 M 4 M 4 Test torque (Ncm) Diagram below shows the range of tensile strength for a screw connection with a clamp screw M3, fastened with a torque of 50 Ncm, depending on the wire size. Diagram Tensile strength Wire gauge This comparison chart allows a cross reference between American Wire Gauge (AWG) and metric wire sizes (mm ). Chart AWG Wire composition Wire diameter Wire size 30 x 0,5 7 x 0,0 0,5 mm 0,36 mm 0,05 mm 0,06 mm 8 x 0,3 7 x 0,3 0,3 mm 0,38 mm 0,08 mm 0,09 mm 6 x 0,40 7 x 0,6 0,40 mm 0,48 mm 0,3 mm 0,4 mm 9 x 0,0 0,5 mm 0,5 mm 4 x 0,5 7 x 0,0 0,5 mm 0,6 mm 0, mm 0,3 mm 9 x 0,3 0,64 mm 0,4 mm x 0,64 7 x 0,5 0,64 mm 0,76 mm 0,33 mm 0,36 mm 9 x 0,6 0,8 mm 0,38 mm 0 x 0,8 7 x 0,3 0,8 mm 0,97 mm 0,5 mm 0,56 mm 9 x 0,0,0 mm 0,6 mm 8 x,0 9 x 0,5,0 mm,7 mm 0,79 mm 0,96 mm 6 9 x 0,9,44 mm,3 mm 4 9 x 0,36,80 mm,95 mm 9 x 0,46,9 mm 3,09 mm 0 37 x 0,40 3,0 mm 4,60 mm 8 33 x 0,9 4,0 mm 8,80 mm 6 33 x 0,36 5,5 mm 3,5 mm It has to be noted that wires of the same AWG number but with different composition have slightly different mm. Chart 3 Composition and Dimensions of Copper Wires Wire Size Wire Composition Wire diameter 0,09 mm x 0,0 0,48 mm 0,4 mm 8 x 0,0 0,50 mm 0,5 mm 4 x 0,5 0,70 mm 0,34 mm 7 x 0,5 0,78 mm 0,5 mm 6 x 0,0,0 mm 0,75 mm 4 x 0,0, mm,0 mm 3 x 0,0,4 mm,5 mm 30 x 0,5,6 mm,5 mm 35 x 0,30, mm 4,0 mm 56 x 0,30,8 mm 6,0 mm 9 x 0,64 3,4 mm 0 mm 9 x 0,80 4,3 mm 4 Amphenol

5 C 6- / C 6-3 Technical Information Crimp connection A crimp connection is a non-detachable electrical connection between a wire and a crimp contact produced with the crimp technology. Precise crimping dies which are matched to the crimp barrel and the wire size and a defined deformation result in a reliable electrical connection. There are open crimp barrels (stamped contacts) and closed crimp barrels (turned contacts). The main advantages of crimp connections are: Efficient termination of contacts. Reproducible electrical and mechanical figures with a constant crimp quality. The requirements for crimp connections are defined in IEC 6035 Part / DIN EN 6035 Part. An important point of the quality of a crimp connection is the achieved tensile strength of the termination. Easily measured, the tensile strength is a practible means for quality control purposes. Diagram below shows the required minimum tensile strength for open and closed barrels depending on the wire size. Assembly instructions For crimp contacts use the released crimp tool. The insertion and extraction of crimp contacts shall only be approved with the corresponding insertion / extraction tool. A detailed description of the crimp technology can be found in our crimp tooling catalogs. Diagram Min. tensile strength N / lb N lb mm AWG 0,05 0, 0, 0,5,0,5,5 4,0 6,0 0, Wire gauge in mm / AWG 0 Amphenol 5

6 C 6- / C 6-3 Technical Information Degree of protection Electrical devices to which connectors belong to have to be protected for safety reasons from outside influences like dust, foreign objects, direct contact, moisture and water. This protection is provided on industrial connectors by its housings with their latching devices and sealed cable entries. The degree of protection can be selected depending on the type of intended use. The standard IEC 6059 and/or DIN EN 6059/VDE 0470 Part has specified the degree of protection and divided into several classes. The degree of protection is indicated in the following way: IP 65 Code letters (Internat. Protection) st charact. numeral (degree of protection against access to hazardous parts and against solid foreign objects) nd charact. numeral (degree of protection against ingress of water) The following charts an give an overview about all protection degrees. Chart 4 st charact. Brief description Definition numeral Non-protected Protected against access to hazardous parts with the back of a hand. Protected against solid foreign objects of 50mm Ø. Protected against access to hazardous parts with a finger. Protected against solid foreign objects of,5mm Ø. Protected against access to hazardous parts with a tool. Protected against solid foreign objects of,5mm Ø. Protected against access to hazardous parts with a wire. Protected against solid foreign objects of mm Ø. Protected against access to hazardous parts with a wire. Dust-protected. Protected against access to hazardous parts with a wire Dust-tight. The probe, sphere of 50mm Ø, shall not fully penetrate and shall have adequate clearance from hazardous parts. The jointed test finger of mm Ø, 80mm length, shall have adequate clearance from hazardous parts. The probe, sphere of,5mm Ø, shall not fully penetrate. The probe of,5mm Ø shall not penetrate at all. The probe of mm Ø shall not penetrate at all. The probe of mm Ø shall not penetrate. Intrusion of dust is not totally prevented, but dust shall not penetrate in a quantity to interfere with satisfactory operation of the device or to impair safety. The probe of mm Ø shall not penetrate. No intrussion of dust. Chart 5 nd charact. Brief description Definition numeral K ) Non-protected Protected against vertically falling water drops Protected against vertically falling water drops when enclosure tilted up to 5 Protected against spraying water Protected against splashing water Protected against water jets Protected against powerful water jets Protected against the effects of temporary immersion in water Protected against the effects of continous immersion in water Protected against water during high pressure/steam jet cleaning ) Remark: Numeral acc. to DIN part 9, vehicles IP code Vertically falling drops shall have no harmful effects. Vertically falling drops shall have no harmful effects when the enclosure is tilted at any angel up to 5 on either side of the vertical. Water sprayed at an angle up to 60 on either side of the vertical shall have no harmful effects. Water splashed against the enclosure from any direction shall have no harmful effects. Water projected in jets against the enclosure from any direction shall have no harmful effects. Water projected in powerful jets against the enclosure from any direction shall have no harmful effects. Intrusion of water in quantities causing harmful effects shall not be possible when the enclosure is temporalily immersed in water for 30 min. in m depth. Intrusion of water in quantities causing harmful effects shall not be possible when the enclosure is continuously immersed in water under conditions which shall be agreed between manufacturer and user but which are more severe than for numeral 7. Water projected in powerful jets with high pressure against the enclosure from any direction shall have no harmful effects. 6 Amphenol

7 C 6-/6-3 Remarks Safety classification. General Remarks These connectors are designed and produced in conformity with the low voltage directive (73/3/EWG) respectively Gerätesicherheitsgesetz (German law) and are especially in accordance with the standards DIN EN 6984 (VDE067); IEC (VSE 00-) and IEC The connectors may be used only within the technical ratings. These connectors and/or plug and socket devices are designed and produced according to DIN EN 6984/VDE 067. All technical data refer to mated connectors under live conditions. The safety of the connector system depends on the correct selection of products, proper assembly of the connector device, and a precise fit of the connectors.. Application Remarks Connectors and/or plug and socket devices must be used according to specified technical ratings. The technical data represents the initial value of mated parts under predetermined conditions and length of time.these values could change with different test parameters or product requirements. The C 6-/6-3 Series connectors are used in a wide variety of industries and equipment. Some of these include industrial machines and controls, data processing, instrumentation and test equipment, medical devices, telecommunication s network and equipment, plus outdoor and marine applications. All rated data for the connectors listed in this catalog are based on overvoltage category III ) and pollution degree 3 ) for electronic applications. Connectors were completely mated according to their respective safety locking mechanism. Selection and testing of connectors and/or plug and socket devices to meet specific product or industrial requirements such as rated voltage and the related clearances and creepage distances are the responsibility of the user. 3. Assembling Remarks Protection against electrical shock of the termination of the connectors shall be secured by correct mounting. Connectors of the same or different series being mounted side by side may be protected against incorrect mating by the use of coding options. Care must be taken to ensure the parts are correctly mated and screws are tightened with the proper torque. 4. Termination Remarks Cable connectors are effectively secured when using the internal cable clamp. When the connector contains a simple gland bushing for retention without clamping ring the cable should have a strain relief close behind the connector. All cable properties or specifications must be compatible with the connector design and materials. Designated wire conductors must be terminated to the correct poles in the connector. Crimp contacts must be fully inserted into the plastic housing and retention assured with a slight tug on the wire. Wire should be stripped correctly according to printed specifications to insure no electrical contact can be made between the conductors. There should be no nicked or cut strains during the stripping action. 5. Safety Classification acc. to DIN EN 6984 VDE 067 Style enclosed mated enclosed unmated protective earthing contact finger safety mated finger safety unmated hand back safety mated connector with breaking capacity ) rewirable Cable clamp with without Male cable connector X X X X X X X X X Female cable connector X X X X X X X X X Male receptacle screw / crimp Female receptacle screw / crimp X X X X X X X X X X X X 3) X X X X Male receptacle solder X X X X 3) X 3) X X X Female receptacle solder X X X 3) X 3) X 3) X X X ) Overvoltage category III: Equipment intended for the use in installations or parts of it in which lightning overvoltages do not need to be considered, however switching overvoltages generated by the equipment, and for cases where the reliability and the availability of the equipment or its dependent circuits are subject to special requirements. Examples are protecting means, switches and sockets. ) Pollution degree 3: Conductive pollution occurs or dry non-conductive pollution occurs which becomes conductive due to condensation which is to be expected. 3) Protection against electrical shock on the termination side has to be secured by proper mounting. Amphenol 7

8 C 6- Product description The circular connectors of the C 6- series are designed to meet the high requirements of industrial applications under harsh environmental conditions. The range includes versions with screw, solder and crimp terminations. A selection of crimp contacts for hand crimp tools and crimp machines ensure a reliable termination resulting in qualitative, technical and economical advantages. A large selection of housing styles offers the user an optimal solution. Main features and advantages: Circular connectors with contact arrangements 3 + PE and 6 + PE for power and signal applications For applications in machine tools, measurement and control, process technology and medical equipment Housing are made from high grade plastic material Protected against unlocking by threaded coupling Cable housing straight with PG 9, and 3,5 cable outlet, Cable housing 90 with PG 9 and cable outlet Cable housing straight or right-angled with various cable outlets ) Protection degree IP 65/IP 67 per IEC 6059 in mated condition Internal strain relief with screw clamp or clamping ring provides a safe cable restrain ) Other cable outlets uppon request 8 Amphenol

9 C 6- Product description Order information Approvals Order information Contact plating The standard plating is silver. Gold plated contacts are available upon request. Min order quantity = 00 contacts per type. Color coding Upon request the coupling ring of the plugs and the housings of the receptacles can be delivered in the colors red, green, blue, yellow and grey. Min order quantity = 50 pcs. per type. Crimp version Order numbers do not include crimp contacts. Please order separately (see page 33/34). Crimp contact for higher currents are available upon request. Crimp tooling Ask for our catalog Tools Mechanical coding Achieved with special coding pins which are inserted into contact cavities. Min. order quantity = 50 pcs. per type. Testhouse Characteristis Approval No. VDE 3+PE, 400 V, 6 A 78 6+PE, 50 V, 0 A 780 SEV 3+PE, 400 V, 6 A PE, 50 V, 6 A UL 3+PE, 50 V, A E PE, 50 V, 8 A CSA 3+PE, 50 V, A PE, 50 V, 8 A 6+PE, 50 V, 5 A German LLyod 3+PE, 50 V, 6 A 408 / 84 6+PE, 50 V, 8 A In general approvals refer to representative versions of the connector series. Extail and specifications of test upon request. Amphenol 9

10 C 6- Characteristics General Characteristics Standard Characteristics Number of contacts 3 + PE 6 + PE Electrical Characteristics Rated insulation voltage Rated impulse withstand voltage Pollution degree Installation (overvoltage) category Material group Current carrying capacity Insulation resistance Contact resistance Climatical Characteristics Climatic category Operating temperature Mechanical Characteristics IP-degree of protection Insertion and withdrawal force Mechanical operation Materials Housing material Dielectric material Gasket material Contact plating Other Characteristics Termination technique Wire gauge mm / AWG Flammability Locking system Fire protection IEC ) IEC ) IEC ) IEC ) IEC ) IEC , Test 5b IEC IEC IEC IEC 6059 UL 94 ) IEC ^= VDE 00- ^= DIN EN IEC , Test 3b IEC , Test 9a DIN 550 Part DIN Part -3 screw type solder type crimp type 400 V 50 V 00 V 6000 V 4000 V 3 3 III III II II 6 A / + 55 C 0 A / + 55 C 3 A / + 55 C 0 8 Ω 0 8 Ω 5 m Ω 5 m Ω 5 N schrauben max.,5 mm 40 / 00 / C C IP 65 / IP mating cycles Polyamid 6.6 Polyamid 6.6 Neoprene silver plated / gold plated VO round thread DIN 405 S 30 N 40 / 5 / 56 löten 0,75 mm crimpen 0,4 -,5 mm The stated technical values refer to the use as connector. If these components are used as plug and socket device a reduced current carrying capacity has to be considered. 0 Amphenol

11 C 6- Derating curves No of contacts 3 + PE No of contacts 6 + PE Current carrying capacity A alle Ansc all c wire Current carrying capacity y g p y A a b alle Ko all cont a) Ansc wire b) Ansc wire C BaAmbient elemente temperature Umgeb ngstemperat r B lambient t Utemperature b t t C all contacts wire gauge,5 mm, 4 AWG all contacts a) wire gauge,5 mm, 6 AWG b) wire gauge 0,75 mm, 0 AWG C 6- Mounting instructions Shinning lengths Screw contacts 7,0+ mm ) Solder contacts 4,0+ mm Crimp contacts 0,4-0,50 mm 3+0,5 mm 0,50 -,50 mm 3,5+ mm ) end splice recommended Torque for back shell and cable clamp min. Nm max. Nm coupling ring male internal strain relief back shell sealing gasket clamping ring cable nut metal washer Torque for back shell and cable clamp min. Nm max.nm back shell right angled coupling ring male clamping ring sealing gasket cable nut female female Amphenol C 6- Amphenol C 6- Amphenol

12 C 6- Male cable connectors Description Drawing No. of cont. Part. no. Cable outlet Ø 8-0 Ø 0- Ø 0- Male cable connector, 3+PE screw, 6+PE solder termination, with cable clamp or clamping ring 3 + PE T T T (with clamping ring) 6 + PE T T T (with clamping ring) Male cable connector, 3+PE screw, 6+PE solder termination, without cable clamp 3 + PE T T PE T T Male cable connector, crimp version without contacts ), with cable clamp or clamping ring 6 + PE T T T (with clamping ring) Cable outlet Ø 6-8 Ø 8-0 Male cable connector, right-angled, 3+PE screw, 6+PE solder termination, with clamping ring 3 + PE T T PE T T Male cable connector, right-angled, crimp version, without contacts ), with clamping ring 6 + PE T T ) Please order crimp contacts separatly, see page 33/34, part numbersystem for crimpcontacts see page 35. Amphenol

13 C 6- Female receptacles Panel cutout ) Description Drawing No. of cont. Part. no. Female receptacle, screw termination 3 + PE T Female receptacle, solder termination 6 + PE T Female receptacle, crimp 6 + PE T version, without contacts ) ) Please order crimp contacts separatly, see page 33/34, past numbersystem for crimpcontacts see page 35. ) Mounting hole Ø without chamfer, suitable sealing for screws is necessary. Amphenol 3

14 C 6- Female cable connectors Description Drawing No. of cont. Part No. Cable outlet Ø 8-0 Ø 0- Ø 0- Female cable connector, 3+PE screw, 6+PE solder termination, with cable clamp or claming ring 3 + PE T T T (with clamping ring) 6 + PE T T T (with clamping ring) Female cable connector, 3+PE screw, 6+PE solder termination, without cable clamp 3 + PE T T PE T T Female cable connector, crimp version without contacts ), with cable clamp or claming ring 6 + PE T T T (with clampin ring) Cable outlet Ø 6-8 Ø 8-0 Female cable connector, right-angled, 3+PE screw, 6+PE solder termination, with clamping ring 3 + PE T T PE T T Female cable connector, right-angled, crimp version, without contacts ), with clamping ring 6 + PE T T ) Please order crimp contacts separatly, see page 33/34, part numbersystem for crimpcontacts see page Amphenol

15 C 6- Male receptacles Panel cutout ) Description Drawing No. of cont. Part No. Male receptacle, screw termination 3 + PE T Male receptacle, solder termination 6 + PE T Male receptacle, crimp version, 6 + PE T without contacts ) Male receptacle, straight dip solder pins 3 + PE T Hole pattern on PCB Male receptacle, straight dip soldier pins 6 + PE T Hole pattern on PCB ) Please order crimp contacts separatly, see page 33/34, past numbersystem for crimpcontacts see page 35. ) Mounting hole Ø without chamfer, suitable sealing for screws is necessary. Amphenol 5

16 C 6- Accessories Description Figure Part No. Figure Part No. Protective cover for male cable connector and male receptacle 5,5 Ø 9,0 for male connector T ,5 Ø 9,0 for male receptacle T ca. 35 Protective cover for female cable connector and female receptacle 3,3 for female cable connector for female receptacle Ø 9,0 T T ca ,0 60,0 3,3 Ø 9,0 Backshell, straight version, packaging unit 0 pcs. cable outlet 8-0 / 0,35-0,394 cable outlet 0- / 0,394-0,47 T X T X Back shell, straight version, with clamping ring, Packaging unit 0 pcs. cable outlet 0- / 0,394-0,47 T X Backshell, right-angled with clamping ring, packaging unit 0 pcs. cable outlet 8-0 / 0,35-0,394 T X cable outlet 0- / 0,394-0,47 T X Cable clamp, packaging unit 0 pcs. cable clamp diameter Ø 6- N X 6 Amphenol

17 C 6-3 Product description The circular connector series C 6-3 has two housing sizes. The connectors are designed to meet the high requirements of industrial applications under harsh environmental conditions. The range includes versions with screw and crimp terminations. A selection of crimp contacts for hand crimp tools and crimp machines enables a reliable termination resulting in qualitative, technical and economical advantages. A broad selection of housing styles are available. Main features and advantages: Circular connectors for power and signal applications with following contact arrangements: Shell size : 8 + PE,, 7 + PE Shell size : 5 + PE, + PE,, 9 + PE For applications in machine tools, measurement and control, process technology and medical equipment Housing are made from high grade plastic material. Vibration safe connection by solid bayonet coupling with lock in position. Cable housing straight or right-angled with various cable outlets Protection degree IP 65 in mated position. Internal cable clamp or clamping ring provides a safe cable restrain. Amphenol 7

18 C 6-3 Product description Order information Approvals Order information Color coding Upon request the coupling ring of the plugs and the housings of the receptacles can be delivered in the color red, green, blue, yellow and grey. Polarization Depending on the contact arrangements the polarization of this connector series can be varied. The contact inserts can be mounted in alternate positions. The order number in the catalog refers always to position. The position of the contact inserts can also be changed by the customer using a disassembly tool (see page 6 and 9) to remove the insert and remount it in the required position (see page 9). Crimp version Order numbers do not include crimp contacts. Please order separately (page 33/34). Crimp contacts for higher currents are available upon request. Crimp tooling Ask for our crimp tooling catalogs. Testhouse Approvals Approval No. VDE 3964 UL E CSA In general approvals refer to representative versions of the connector series. Extail and specifications of test upon request. 8 Amphenol

19 C 6-3 Coding system Polarization Depending on the contact arrangements the polarization of this connector series can be varied. Please take care of the housing and contact insert characteristics. Shell size Shell size No of contacts No of coding possibil. Position No of contacts No of coding possibil. Position 8 + PE 7 + PE 4 7 6, 3, 5, 7,, 3, 4, 5, 6, 7,, 3, 4, 5, PE + PE 9 + PE ,, 3, 4, 6, 7,, 3, 4, 5, 6, 7,, 3, 4, 5, 6, 7, 3, 4, 5, 6, 7 Coding point on the shell Coding point on the contact insert Pos. Pos. Pos. 3 Pos. 4 Pos. 5 Pos. 6 Pos. 7 Pin contact insert termination side Pos. Pos. Pos. 3 Pos. 4 Pos. 5 Pos. 6 Pos. 7 Socket contact insert termination side Disassembly of contact inserts with disassembly tool (see page 6 und 9) Pin or socket contact insert Disassembly tool Amphenol 9

20 C 6-3 Characteristics General Characteristics Standard Characteristics Number of contacts 8 + PE Shell size Shell size 7 + PE 5 + PE + PE 9 + PE Electrical Characteristics Rated insulation voltage Rated impulse withstand voltage Pollution degree Installation (overvoltage) category Material group Current carrying capacity Insulation resistance Contact resistance Climatical Characteristics Climatic category Operating temperature Mechanical Characteristics IP-degree of protection Insertion and withdrawal force Mechanical operation Materials IEC ) IEC ) IEC ) IEC ) IEC ) IEC , Test 5b IEC , Test 3a IEC 605--, Test a IEC IEC 6059 IEC , Test 3b IEC , Test 9a 400 V 00 V 00 V 400 V 3 x 500 V 9 x 300 V 400 V 50 V 6000 V 3000 V 3000 V 6000 V 3 x 6000 V 9 x 4000 V 30 V 4000 V 3 III II 3 III II 3 III II 3 III II 3 III II 3 III II 3 III II A x 6 A 6 A A 3 x A 4 x 6 A 4 x 6 A 9 x A x A 0 8 Ω 6 A 40 / 5 / 56 5 mω 40 / 00 / / 5 / C C (5+PE: +00 C) IP 65 5 N 30 N N 5 N 5 N 30 N 5 N 500 mating cycles Housing material Dielectric material Gasket material Contact plating Other Characteristics Termination technique Wire range mm / AWG Flammability Locking system Fire protection UL 94 DIN 550 Part DIN Part -3 Polyamid 6.6 Polyamid 6.6 Neoprene silver plated / gold plated crimp screw crimp 0,4-0,4-0,4-4 mm 0,4-0,4-0,4 -,5 mm,5 mm,0 mm,5 mm,5 mm,0 mm VO bayonet ) IEC ^= VDE 00- ^= DIN EN The stated technical values refer to the use as connector. If these components are used as plug and socket device a reduced current carrying capacity has to be considered. 0 Amphenol S

21 C 6-3 Derating curves Shell size Current carrying capacity A Ambient temperature 8+PE 8+PE a) a) alle Kcontacts Ø,6 Ansch wire gauge 6 AWG all con wire g C Current carrying capacity A a b Ambient temperature 4+PE a) a) 4 4 Kon contacts Ø,5 Ansch wire gauge 6 AWG b) 4 concontacts Ø,5 wire wire g gauge 0 AWG b) Ko Ansch con wire g C Current carrying capacity A PE alle Kontak contacts Ø,5 Anschlußq wire gauge 0 AWG all contact wire gauge Ambient temperature C Shell size Current carrying capacity A Ambient temperature 5+PE a) a) alle Ko contacts Ø,5 Ansch wire gauge AWG b) all all con contacts Ø,5 wire wire g gauge 4 AWG b) alle Ko Ansch all con wire g C Current carrying capacity A a b Ambient temperature +PE a) a) 3 3 Kocontacts Ø,5 Ansc wire gauge 4 AWG b) 3 9 con contacts Ø,6 wire wire gauge 6 AWG b) 9 Ko Ansc 9 con wire C Current carrying capacity A a b Ambient temperature 4+PE a) a) Kocontacts Ø,6 Ansc wire gauge 6 AWG b) 4 contacts Ø,5 wire wire g gauge 0 AWG b) 4 Ko Ansc 4 con wire g C Current carrying capacity A Ambient temperature 9+PE alle Kon contacts Ø,5 Anschlu wire gauge 0 AWG all conta wire gau C Amphenol

22 C 6-3 View of connector style, Shell size and Identification Figure Description Conn. Style Page Size Size Male cable connector Long version with internal cable clamp I 4 30 Short version, with clamping ring H 4 30 Right-angled, with clamping ring K 4 30 Female cable connector Long version with internal cable clamp E 5 3 Short version, with clamping ring D 5 3 Right-angled, with clamping ring F 5 3 Female receptacle Flange mounting, with mounted gasket G 5 30 Panel mounting with ring nut, with gasket N 5 Male receptacle Flange mounting, with mounted gasket C 6 3 Amphenol

23 C 6-3 Mounting instruction Torque for back shell and cable screw min. Nm max. Nm short back shell clamping ring cable nut sealing gasket long back shell coupling ring male internal strain relief metal washer right-angled female Amphenol C 6-3 Shinning lengths Screw contacts 7,0+ mm ) Solder contacts 4,0+ mm Crimp contacts 0,4-0,50 mm 3+0,5 mm 0,50 -,50 mm 3,5+ mm ) end splice recommended Amphenol 3

24 C 6-3 Shell size Male cable connectors I H K Description Drawing No. of cont. Contacts ) Part No. Cable outlet Ø 0- Ø -4 Male cable connector, long, style I with internal cable clamp, without contacts ) 8 + PE.N C06 0I C06 0I x.n x.n C06 0I04 00 C06 0I PE.N C06 0I07 00 C06 0I Cable outlet Ø 8-0 Ø 0- Male cable connector, short, style H with clamping ring, without contacts ) 8 + PE.N C06 0H C06 0H x.n x.n C06 0H04 00 C06 0H PE.N C06 0H07 00 C06 0H Male cable connector, style K with clamping ring, without contacts ) 8 + PE.N C06 0K C06 0K x.n x.n C06 0K04 00 C06 0K PE.N C06 0K07 00 C06 0K ) Please order crimp contacts separatly, see page 33/34. ) Part No system for crimp contacts, see page Amphenol

25 C 6-3 8,6 ±0, (.6) Shell size Female receptacles G 3,8 +0, oder M3,5 (.5) Panel cutout 6, +0, (.03) 8,6 ±0, (.6) N 30, +0, (.89) SW7, +0, (.07) Panel cutout Identification Drawing No. of cont. Contacts ) Part No. Female receptacle, 8 + PE.N C06 0G without contacts ) x.n x.n C06 0G PE.N C06 0G Female receptacle, style N, 8 + PE.N C06 0N without contacts ) x.n x.n PE.N C06 0N C06 0N C 6-3 Shell size Female cable connectors E D F Identification Drawing No. of cont. Contacts ) Part No. Cable outlet Ø 0- Ø -4 Female cable connector, long, style E with internal cable clamp, without contacts ) 8 + PE.N C06 0E C06 0E x.n C06 0E04 00 C06 0E x.n PE.N C06 0E07 00 C06 0E Cable outlet Ø 8-0 Ø 0- Female cable connector, short, style D with clamping ring, without contacts ) 8 + PE.N C06 0D C06 0D x.n C06 0D04 00 C06 0D x.n PE.N C06 0D07 00 C06 0D Female cable connector, style F with clamping ring, without contacts ) 8 + PE.N C06 0F C06 0F x.n C06 0F04 00 C06 0F x.n PE.N C06 0F07 00 C06 0F ) Please order crimp contacts separatly, see page 33/34. ) Part No system for crimp contacts, see page 35. Amphenol 5

26 C 6-3 Shell size Male receptacles C Panel cutout Identification Drawing No. of cont. Contacts ) Part No. Male receptacle, style C, 8 + PE.N C06 0C without contacts ) x.n x.n C06 0C PE.N C06 0C C 6-3 Shell size Accessories Identification Drawing Part No. Protective cover for male cable connector and male receptacle. for male cable connector for male receptacle C06 00U C06 00U Protective cover for female cable connector and female receptacle. for female cable connector C06 00V for female receptacle C06 00V Disassembly tool for pin-and socket inserts FH ) Please order crimp contacts separatly, see page 33/34. ) Part No system for crimp contacts, see page Amphenol

27 C 6-3 EMI Shell size shielded version The C6-3 EMI connectors excel by versatile fields of application, especially high mechanical requirements, industrial ebvironments and demands for safe contact. Main features: high attenuation of shielding contact inserts suitable for standard and EMI versions completely compatible with standard C6-3, size same technical characteristics as standard C6-3 Two versions available:. Version with metalized plastic housing accord. VDE 060. PE wire is connected to cable shield and housing. In case of error the current will be lead directly to the PE wire.. Combined version with metalized plastic and two-part metal housing accord. VDE 03. PE wire is securely and firmly connected with the metal housing. Crimp version Order numbers do not include crimp contacts. Please order separately (see page 33/34). Crimp contact for higher currents are available upon request. Crimp tooling Ask for our catalog Tools. Amphenol 7

28 C 6-3 Shell size C6-3 EMI Description Drawing No. of cont. Contacts ) Part No. Cable outlet Ø 0- Ø -4 Male cable connector, style H, without contacts ), without cable screw, metalized plastic housing 8 + PE.N C06 0H C06 0H PE x.n x.n C06 0H C06 0H N C06 0H C06 0H Female cable connector, style D, without contacts ), without cable screw, metalized plastic housing 8 + PE.N C06 0D C06 0D PE x.n x.n C06 0D C06 0D N C06 0D C06 0D Cable outlet Ø 9- Male cable connector, without contacts ), two part metal housing, with PE contact 8 + PE.N C06 0H x.n x.n C06 0H PE.N C06 0H Female cable connector, without contacts ), two part metal housing, with PE contact 8 + PE.N C06 0D x.n x.n C06 0D PE.N C06 0D ) Please order crimp contacts separatly, see page 33/34. ) Part No system for crimp contacts, see page Amphenol

29 C 6-3 Shell size C6-3 EMV 3,8 +0, oder M3,5 (.5) 8,6 ±0, (.6) Panel cutout 6, +0, (.03) 8,6 ±0, (.6) 30, +0, (.89) SW7, +0, (.07) Panel cutout Description Drawing No. of cont. Contacts ) Part No. Female receptacle, style G, without contacts ) 8 + PE.N C06 0G x.n x.n C06 0G PE.N C06 0G Female receptacle, style N, without contacts ) 8 + PE.N C06 0N x.n x.n C06 0N PE.N C06 0N Male receptacle, style C, without contacts ) 8 + PE.N C06 0C x.n x.n C06 0C PE.N C06 0C Mounting instruction min.4 Amphenol 9

30 C 6-3 Shell size Male cable connectors I H K Description Drawing No. of cont. Contacts ) Part No. Cable outlet Ø -4 Ø 4-6 Ø 9- Male cable connector, long, style I with internal cable clamp, 5 + PE screw termination, + PE-, and 9 + PEversion without contacts ) 5 + PE C06 0I C06 0I C06 0I PE 9 x.n x.n x.n x.n C06 0I0 003 C06 0I0 004 C06 0I C06 0I C06 0I0 005 C06 0I PE.N C06 0I C06 0I C06 0I Male cable connector, short, style H with clamping ring, 5 + PE screw termination, + PE-, and 9 + PEversion without contacts ) Cable outlet Ø 0- Ø -4 Ø PE C06 0H C06 0H PE 9 x.n x.n x.n x.n C06 0H0 003 C06 0H0 004 C06 0H C06 0H C06 0H PE.N C06 0H C06 0H Male cable connector, style K with clamping ring, 5 + PE screw termination, + PE-, and 9 + PEversion without contacts ) 5 + PE C06 0K PE 9 x.n x.n x.n x.n C06 0K0 004 C06 0K PE.N C06 0K C 6-3 Shell size Female receptacle G Panel cutout Identification Drawing No. of cont. Contacts ) Part No. Female receptacle, style G, 5 + PE screw termination, + PE-, and 9 + PEversion without contacts ) 5 + PE C06 0G PE 9 x.n x.n x.n x.n C06 0G0 000 C06 0G PE.N C06 0G ) Please order crimp contacts separatly, see page 33/34. ) Part No system for crimp contacts, see page Amphenol

31 C 6-3 Shell size Female cable connectors E D F Description Drawing No. of cont. Female cable connector, long, style E with internal cable clamp, 5 + PE screw termination, + PE-, and 9 + PEversion without contacts ) Contacts ) Part No. Cable outlet Ø -4 Ø 4-6 Ø PE C06 0E C06 0E C06 0E PE 9 x.n C06 0E0 003 C06 0E0 004 C06 0E x.n x.n x.n C06 0E C06 0E C06 0E PE.N C06 0E C06 0E C06 0E Female cable connector, short, style D with clamping ring, 5 + PE screw termination, + PE-, and 9 + PEversion without contacts ) 5 + PE C06 0D C06 0D PE 9 x.n x.n x.n x.n Cable outlet Ø 0- Ø -4 C06 0D0 003 C06 0D0 004 C06 0D C06 0D PE.N C06 0D C06 0D Female cable connector, style F with clamping ring, 5 + PE screw termination, + PE-, and 9 + PEversion without contacts ) 5 + PE C06 0F PE 9 x.n x.n x.n C06 0F0 004 C06 0F PE.N C06 0F C 6-3 Shell size Male receptacle C Panel cutout Description Drawing No. of cont. Contacts ) Part No. Male receptacle, style C, 5 + PE screw termination, + PE-, and 9 + PEversion without contacts ) 5 + PE C06 0C PE 9 x.n x.n x.n x.n PE.N C06 0C0 000 C06 0C C06 0C ) Please order crimp contacts separatly, see page 33/34. ) Part No system for crimp contacts, see page 35. Amphenol 3

32 C 6-3 Shell size Accessories Description Figure Part No. Protective cover for male cable connector and male receptacle for male cable connector for male receptacle C06 00U C06 00U Protective cover for female cable connector and female receptacle for female cable connector for female receptacle C06 00V C06 00V Disassembly tool for pin-and socket inserts FH Amphenol

33 C 6- und 6-3 Crimp contacts Pin Stamped single contacts Stamped contacts on reel for hand crimping tools Stamped contacts on reel for crimp machines 00 pcs 000 pcs (feeding left or right hand side) Series Contact Ø in mm Insulation Ø in mm No. of cont. Shell size Wire gauge in mm AWG Supplied as pcs. Part No. Contact plating silver gold C 6-,6,0 -,0 6 + PE 0,4-0,5 single contact 00 VN () VN () 6-0 contacts on reel 00 ZN () ZN () right 000 HN () HN () left 000 TN () TN () C 6-,6,8 -,8 6 + PE 0,5 -,5 single contact 00 VN () VN () 0-6 contacts on reel 00 ZN () ZN () right 000 HN () HN () left 000 TN () TN () C 6-3,5,6 -,3 0,4-0,5 single contact 00 VN () VN () 7 + PE 6-0 contacts on reel 00 ZN () ZN () right 000 HN () HN () 9 + PE left 000 TN () TN () C 6-3,5,8 -,0 0,5 -,0 single contact 00 VN () VN () 7 + PE 0-8 contacts on reel 00 ZN () ZN () right 000 HN () HN () 9 + PE left 000 TN () TN () C 6-3,6,0 -,0 8 + PE 0,4-0,5 single contact 00 VN () VN () + PE 6-0 contacts on reel 00 ZN () ZN () right 000 HN () HN () left 000 TN () TN () C 6-3,6,8 -,8 8 + PE 0,5 -,5 single contact 00 VN () VN () + PE 0-6 contacts on reel 00 ZN () ZN () right 000 HN () HN () left 000 TN () TN () C 6-3,6,5-3,5 8 + PE,5 -,5 single contact 00 VN () VN () + PE 6-4 contacts on reel 00 ZN () ZN () right 000 HN () HN () left 000 TN () TN () C 6-3,5,8 -,8 0,5 -,5 single contact 00 VN (0) VN (0) + PE 0-6 contacts on reel 00 ZN () ZN () right 000 HN () HN () left 000 TN () TN (),5-3,5,5 -,5 single contact 00 VN (0) VN (0) + PE 6-4 contacts on reel 00 ZN () ZN () right 000 HN () HN () left 000 TN () TN () Single contact in plasticbag stamped contact on red HN = feeding right side / TN = feeding left side Amphenol 33

34 C 6- und 6-3 Crimp contacts Socket Stamped single contacts Stamped contacts on reel for hand crimping tools Stamped contacts on reel for crimp machines 00 pcs 000 pcs (feeding left or right hand side) Series Contact Ø in mm Insulation Ø in mm No. of cont. Shell size Wire gauge in mm AWG Supplied as pcs. Part No. Contact plating silver gold C 6-3,5,0 -,0 0,4-0,5 single contact 00 VN () VN () 7 + PE 6-0 contacts on reel 00 ZN () ZN () right 000 HN () HN () 9 + PE left TN () TN () C 6-3,5,6 -,3 0,5 -,0 single contact 00 VN () VN () 7 + PE 0-8 contacts on reel 00 ZN () ZN () right 000 HN () HN () 9 + PE left TN () TN () C 6-,6,0 -,0 6 + PE 0,4-0,5 single contact 00 VN () VN () C PE 6-0 contacts on reel 00 ZN () ZN () + PE right 000 HN () HN () left TN () TN () 9 + PE C 6-,6,8 -,8 6 + PE 0,5 -,5 single contact 00 VN () VN () C PE 0-6 contacts on reel 00 ZN () ZN () + PE right 000 HN () HN () left TN () TN () C 6-3,6,5-3,5 6 + PE,5 -,5 single contact 00 VN () VN () 8 + PE 6-4 contacts on reel 00 ZN () ZN () + PE right 000 HN () HN () left TN () TN () C 6-3,5,8 -,8 0,5 -,5 single contact 00 VN (0) VN (0) + PE 0-6 contacts on reel 00 ZN () ZN () right 000 HN () HN () left TN () TN () C 6-3,5,5-3,5,5 -,5 single contact 00 VN (0) VN (0) + PE 6-4 contacts on reel 00 ZN () ZN () right 000 HN () HN () left TN () TN () Single contact in plasticbag stamped contact on red HN = feeding right side / TN = feeding left side 34 Amphenol

35 Part No. system for crimp contacts VN ) 0 _ ) 06 _ 3) 000 _ 4) () _ 5) ) supplied as: VN = single contact 00 pcs. ZN = contacts on reel 00, 00 or 400 contacts HN = Contacts on reel with 000 contacts for Acrimat FD (contact feeding right hand side) TN = Contacts on reel with 000 contacts for Acrimat II + III (contact feeding left hand side) ) Type of contact: 0 = male contact 0 = emale contacts 3) Contact pin dia.: e. g. 06 ^=,6 mm 4) Index of version (wire gauge) 5) Plating: () = silver plated () = gold plated (4) = gold plated for high performance Amphenol 35

36 Summary of Part No. Part No. Page Part No. Page Part No. Page Part No. Page C06 00U C06 00U C06 00U C06 00U C06 00V C06 00V C06 00V C06 00V C06 0C C06 0C C06 0C C06 0C C06 0C C06 0C C06 0C C06 0C C06 0C C06 0D C06 0D C06 0D C06 0D C06 0D C06 0D C06 0D C06 0D C06 0D C06 0D C06 0D C06 0D C06 0D C06 0D C06 0D C06 0D C06 0D C06 0D C06 0D C06 0D C06 0D C06 0E C06 0E C06 0E C06 0E C06 0E C06 0E C06 0E C06 0E C06 0E C06 0E C06 0E C06 0E C06 0E C06 0E C06 0E C06 0F C06 0F C06 0F C06 0F C06 0F C06 0F C06 0F C06 0F C06 0F C06 0G C06 0G C06 0G C06 0G C06 0G C06 0G C06 0G C06 0G C06 0G C06 0H C06 0H C06 0H C06 0H C06 0H C06 0H C06 0H C06 0H C06 0H C06 0H C06 0H C06 0H C06 0H C06 0H C06 0H C06 0H C06 0H C06 0H C06 0H C06 0H C06 0H C06 0H C06 0I C06 0I C06 0I C06 0I C06 0I C06 0I C06 0I C06 0I C06 0I C06 0I C06 0I C06 0I C06 0I C06 0I C06 0I C06 0K C06 0K C06 0K C06 0K C06 0K C06 0K C06 0K C06 0K C06 0K C06 0N C06 0N C06 0N C06 0N C06 0N C06 0N C06 0C C06 0D C06 0D C06 0E C06 0E C06 0E C06 0F C06 0G C06 0H C06 0H C06 0I C06 0I C06 0I C06 0K FH FH HN () 33 HN () 33 HN () 33 HN () 33 HN () 33 HN () 33 HN () 33 HN () 33 HN () 33 HN () 33 HN () 33 HN () 33 HN () 33 HN () 33 HN () 33 HN () 33 HN () 33 HN () 33 HN () 34 HN () 34 HN () 34 HN () 34 HN () 34 HN () 34 HN () Amphenol

37 Summary of Part No. Part No. Page Part No. Page Part No. Page Part No. Page HN () 34 HN () 34 HN () 34 HN () 34 HN () 34 HN () 34 HN () 34 N X 6 T X 6 T X 6 T X 6 T X 6 T X 6 T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T TN () 33 TN () 33 TN () 33 TN () 33 TN () 33 TN () 33 TN () 33 TN () 33 TN () 33 TN () 33 TN () 33 TN () 33 TN () 33 TN () 33 TN () 33 TN () 33 TN () 33 TN () 33 TN () 34 TN () 34 TN () 34 TN () 34 TN () 34 TN () 34 TN () 34 TN () 34 TN () 34 TN () 34 TN () 34 TN () 34 TN () 34 TN () 34 VN () 33 VN () 33 VN () 33 VN () 33 VN () 33 VN () 33 VN () 33 VN () 33 VN () 33 VN () 33 VN () 33 VN () 33 VN () 33 VN () 33 VN (0) 33 VN (0) 33 VN (0) 33 VN (0) 33 VN () 34 VN () 34 VN () 34 VN () 34 VN () 34 VN () 34 VN () 34 VN () 34 VN () 34 VN () 34 VN (0) 34 VN (0) 34 VN (0) 34 VN (0) 34 ZN () 33 ZN () 33 ZN () 33 ZN () 33 ZN () 33 ZN () 33 ZN () 33 ZN () 33 ZN () 33 ZN () 33 ZN () 33 ZN () 33 ZN () 33 ZN () 33 ZN () 33 ZN () 33 ZN () 33 ZN () 33 ZN () 34 ZN () 34 ZN () 34 ZN () 34 ZN () 34 ZN () 34 ZN () 34 ZN () 34 ZN () 34 ZN () 34 ZN () 34 ZN () 34 ZN () 34 ZN () 34 Amphenol 37

38 International Argentina Amphenol Argentina Av. Callao 930 nd Floor Office B Plaza C03 AAP Buenos Aires Phone +54 / / Fax +54 / / Italy Amphenol Italia S.p.A. Via Barbaiana n. 5 l-000 Lainate (MI) Phone +39 / / Fax +39 / / Sweden Amphenol Scandinavia Johanneslundsvägen 94 6 Upplands Väsby Phone +46 / 8 / Fax +46 / 8 / Australia Amphenol Australia Ltd. Fiveways Blvd Keysborough Victoria 3 73 Phone +6 / 3 / 8796 / 8888 Fax +6 / 3 / 8796 / 880 Japan Amphenol Japan, K.K. -3-7, Kudan Minami Chiyoda-Ku Tokyo 0 Phone +8 / 3 / 3 63 / 56 Fax +8 / 3 / 5 76 / Spain Amphenol Ibérica C/Comunidad de Madrid, 35-bis oficina N 55 Edificio Burgosol E-830 las Rozas Madrid Phone +34 / Fax +34 / Brasilia Amphenol do Brasil Ltda. Rua Diogo Moreira 3, 0th Floor CEP Sao Paulo SP Phone +55 / / Fax +55 / / Korea Amphenol DaeShin Limited #80 Joong-Dong 3-5 Wonmi-Ku Bucheon-City Kyunggi-Do Korea Phone +8 / / 785 / 588 Fax +8 / / 589 / 54 South Africa Amphenol International Ltd Chislehurston 30 Impala Road Chislehurston Sandton, 46 Phone +7 / / Fax +7 / / France Amphenol Socapex S.A.S. Mil-Aero Business Unit 948, Promenade de l Arve B.P Thyez Cedex Phone +33 / 4 / Fax +33 / 4 / Mexico Amphenol Mexico Prolongacion Reforma 6-6 B Col. Paseo de las Lomas C.P Mexico D.F. Phone +5 / 55 / Fax +5 / 55 / Taiwan Amphenol East Asia Ltd. Taiwan Branch (H.K.) 6 Zhong Shan Road Lane 956 Taoyuan City Taiwan R.O.C. 330 Phone +886 / 3 / 370 / 7855 Fax +886 / 3 / Great Britain Pyle-National A division of Amphenol Ltd. Unit D, Crossgate Drive Queens Drive Industrial Estate Nottingham, NG LW Phone: +44 / 5 / Fax +44 / 5 / Netherlands Amphenol Benelux b.v. Hoofdveste AK Houten Phone +3 / 30 / Fax +3 / 30 / Turkey Amphenol Turkiye Ayazaga Mah. Meydan Sk. No. 8 Beybi Giz Plaza, Kat Maslak/Istanbul Phone +90 / 0 / Fax +90 / 0 / ATE 00 C Printed on chlorin-free bleached paper, specifications may be changed without notice. Copyright 04/04 by Amphenol-Tuchel Electronics GmbH, Germany Hongkong Amphenol East Asia Limited 6/F Railway Plaza 39 Chatham Road South Tsimshatsui, Kowloon Phone +8 5 / 6 99 / 6 63 Fax +8 5 / 6 88 / India Amphetronix Limited Plot No.05 Bhosari Industrial Area Pune Phone +9 / 0 / 748 Fax +9 / 0 / Your engineering sales representives: Peoples Republic of China Amphenol-Tuchel Electronics GmbH China Branch 0- Taishan Road Changzhou 3 0 Phone +86 / 05 9 / Fax +86 / 05 9 / Singapore Amphenol East Asia Limited Asia Pacific Sales Operation Singapore Branch 300 Beach Road #5-07 The Concourse Singapore Phone +7 / / Fax +7 / / USA Amphenol-Tuchel Electronics Representative Office 6900 Haggerty Road Suite 00 Canton, Michigan 4887 Phone + / 734 / Fax + / 734 / Amphenol Corporation Corporate Headquarters 358 Hall Avenue Wallingford, CT 0649 Phone + / 03 / 65 / Fax + / 03 / 65 / 86 8 Amphenol Amphenol-Tuchel Electronics GmbH August-Haeusser- Str. 0. D Heilbronn. Germany. Phone +49 (0) 73/ Fax +49 (0) 73/