MAHATMA GANDHI UNIVERSITY TIMETABLE FOR B.TECH DEGREE EXAMINATIONS, MAY,

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "MAHATMA GANDHI UNIVERSITY TIMETABLE FOR B.TECH DEGREE EXAMINATIONS, MAY,"

Transcription

1 MAHATMA GANDHI UNIVERSITY TIMETABLE FOR B.TECH DEGREE EXAMINATIONS, MAY, 2014 Semester I & II (New Scheme) (2013 Admission Regular, 2012 Admission Improvement & Supplementary /2010 Admission onwards Supplementary) (Time 9.30 a.m to p.m on all days) Day & Date Subject Branch Thursday EN Engineering Physics Wednesday Friday Tuesday EN Engineering Chemistry & Environmental Studies EN Engineering Mathematics-I EN Basic Civil Engineering EN Basic Mechanical Engineering Friday Wednesday EN Basic Electrical Engineering EN Basic Electronics Engg. & Information Technology EN Engineering Graphics AI,CE,EC,EE,EI,PE, IC and MT Friday EN Engineering Mechanics EN Engineering Graphics AN,AU,CS,IT,ME,PO, CH and ST

2 2 I & II Semesters (Old Scheme) ( Scheme, 2002 to 2005 Admissions Mercy Chance / 2006 to 2009 Admissions Supplementary) (Time 9.30 a.m to p.m on all days) Day & Date Subject Engg. Branches Thursday Wednesday Friday Tuesday Friday Wednesday Engineering Physics Engineering Chemistry Engineering Mathematics - I Basic Civil Engineering Basic Mechanical Engineering Basic Electrical Engineering Engineering Graphics Engineering Mechanics Basic Electronic Engineering

3 3 TIME TABLE FOR IV SEMESTER (NEW SCHEME- (2012 ADMISSION REGULAR/2011 ADMISSION IMPROVEMENT & SUPPLEMENTARY/2010 ADMISSION SUPPLEMENTARY TIME TABLE (Time: 1.30 P.m. to 4.30 p.m. on all days except on Friday. On Friday 2 pm to 5 pm) Day & Date Code Subject Branches Friday EN Engineering Mathematics III Common to all branches Tuesday EN Principles of Management AI,AU,EC,EI,IC,IT,ME, MT, PO,PE AN Gas Dynamics AN CE Construction Engg. and Management CE CS Object Oriented Programming CS EE DC Machines and Transformers EE AI EC EI Signals and Systems AI,EC,EI AN Propulsion I AN AU Auto Power Plant AU CE Mechanics of Solids II CE CS IT Data Structures and Algorithms CS,IT EE Linear System Analysis EE IC Transducer Engineering IC ME PE Hydraulic Machines ME,PE MT Mechanical Behavior and Testing MT PO Polymer Physics PO Wednesday AI EC E I IC AN Digital Electronics Aerodynamics I AI,EC,EI,IC AN AU ME Manufacturing Process AU,ME CE Open Channel Flow and Hydraulic CE Machines CS Signals and Communication Systems CS EE Electro Magnetic Theory EE IT Computer Organization and IT Architecture MT Phase Transformation and Heat MT Treatment PO Polymer Science II PO PE Manufacturing Process PE

4 4 Tuesday Thursday AI Signal Communication AI AN Aircraft Structures I AN AU ME PE Machine Drawing CE Surveying II CE CS Microprocessor Systems CS EC Analog Communication EC EE Digital System and Computer EE Organisation EI Electronic Instrumentation EI IC Electrical Engineering IC IT Object Oriented Techniques IT AU,ME,PE MT Electrical, Electronic, Magnetic and MT Optical Materials PO Chemical Engineering I PO AI EC Analog Circuits II AI,EC AN Electrical Technology & Machines AN AU ME Electrical Technology PE CE Civil Engineering Drawing CE AU,ME,PE CS IT Theory of Computation CS,IT EE Computer Programming EE EI Electronic Devices and Circuits II EI IC Mechanical Engineering IC MT Transport Phenomena MT PO Electrical Technology PO

5 5 TIMETABLE FOR IV SEMESTER (OLD SCHEME MERCY CHANCE FOR SCHEME & 2002 TO 2005 ADMISSIONS / SUPPLEMENTARY FOR 2006 TO 2009 ADMISSIONS (Time: 1.30 P.m. to 4.30 p.m. on all days except on Friday and *. On Friday 2 pm to 5 pm and *1 p.m to 5 p.m) Day & Date Subject Branch Friday (CMERTPL Engineering Mathematics ANSUF) Tuesday Fluid Mechanics II Theory of Machines I (M) Network Analysis & Synthesis Digital Electronics & Logic Design (L A S) Computer Organization (R) Data Structures and Algorithms (T) Object Oriented Programming Fuels and Combustion (U) Transducers & Industrial Instrumentation Wednesday Computer Programming Structural Analysis I Hydraulic Machines (M) Electronic Circuits Communication Engineering I (L A S) Object Oriented Programming (R) Linear Integrated Circuits & Applications (T) Electrical Technology Mechanics of Machines (U) Principles of Measurements & Instrumentation Aerodynamics I Engineering Economics & Construction Management Machine Tools (M U) Electrical Machines I Electronic Circuits II (L A S) Integrated Circuits (R) Computer Systems Architecture (T) Chemical Engineering I Computer Programming Gas Dynamics

6 Tuesday Thursday Surveying II *Machine Drawing II (1 pm. to 5 pm.) (M) Computer Programming *Automobile Engg. Drawing (U) (1 pm. to 5 pm.) Signals & Systems (L T A S) Data Structures & Programming (R) Methodology Polymer Physics Digital Electronics Propulsion I Civil Engineering Drawing II Electrical Technology (M U ) Electrical & Electronics Instruments Reliability & Humanities (L A S) Advanced Microprocessor & Peripherals (R) Object Oriented Programming in C+ + (T) Polymer Science II Analog Devices & Circuits II Air Craft Structure I *These examinations will be conducted from 1pm. to 5 pm.

7 7 TIME TABLE FOR VI SEMESTER NEW SCHEME (2011 ADMN. REGULAR / 2010 ADMISSION IMPROVEMENT / SUPPLEMENTARY) (Time: 1.30 P.m. to 4.30 p.m. on all days except on Fridays. On Fridays 2 pm to 5 pm) DAY & DATE Wednesday CODE SUBJECT BRANCH AN Avionics AN AI , EI & IC Process Control Instrumentation AI, EI &IC AU & ME Mechanics of Machines AU & ME CE Design of Steel Structures CE CS & I T Design and Analysis of Algorithms CS & IT EE Power Generation and Distribution EE EC Digital Communication Techniques EC PO Engineering Statistics & Quality Control PO PE Kinematics of Machinery PE Thursday AN Experimental Aerodynamics AN AI , EC & EI Digital Signal Processing AI, EC& EI AU , ME & PE Heat & Mass Transfer AU, ME& PE CE Geotechnical Engineering II CE CS Internet Computing CS EE Induction Machines EE IT Digital Signal Processing IT IC Principles of Telemetry & Communication IC PO Polymer Processing II PO AN Aircraft Structures II AN Friday AI , EI & IC Industrial Instrumentation I AU Automotive Transmission AU AI, EI& IC

8 8 CE Structural Analysis II CE CS System Software CS EE Control Systems EE EC Radiation and Propagation EC IT Information Theory and Coding IT ME Thermal Systems & Applications ME PO Industrial Engineering PO PE Control & Automation PE Wednesday AN Heat Transfer AN AI Microcontroller Based System Design AI AU & ME Metrology & Machine Tools AU& ME CE Transportation Engineering I CE CS Computer Networks CS EE Digital Signal Processing EE EC Computer Architecture and Parallel Processing EC EI Data Acquisition and Communication EI IT Software Engineering IT IC Signals & Systems with Processing IC PO Chemical Engineering - III PO Friday PE Computer Aided Design & Manufacturing AN Theory of Vibration AN AI & EI Control Engineering II AI& EI PE AU & ME Mechatronics & Control Systems AU& ME CE Water Resources Engineering CE CS Software Engineering CS

9 9 EE Microcontrollers and Embedded Systems EE EC Microcontrollers and Applications EC IT Computer Networks IT IC Advanced Control System IC PO Polymer Blends & Composites PO PE Production Engineering PE Elective I AN L06 Non Destructive Testing AN AI L01 Mechatronics AI L02 AI L03 AU L01 AU L05 CE L02 CE L03 CE L05 CE L06 CS L01 CS L03 CS L06 CS L04 & IT L03 EE L01 EE L04 EE L05 EE L06 EC L01 EC L02 Micro Electronics Digital System Design Vehicle Transport Management Alternate Fuels and Energy Systems Open Channel and Coastal Hydraulics Airport Engineering Concrete Technology Soil Stability Analysis. Distributed Systems User Interface Design Advanced Software Environments UNIX Shell Programming High Voltage Engineering Object Oriented Programming Bio - Medical Engineering Renewable Energy Resources Data Structures and Algorithms Data Base Management Systems AI AU CE CS CS &IT EE EC

10 10 EC L03 EC L04 EC L05 EC L06 EI L05 EI L06 IT L02 IT L04 IT L06 IC L01 ME L01 ME L02 ME L03 ME L05 ME L06 High Speed Digital Design Medical Electronics Soft Computing Television and Radar Engineering Telemetry and Remote Control Robotics and Automation Management Information Systems Advanced Database Systems Optimization Techniques Mechatronics Computational Fluid Dynamics Composite Material Technology Automobile Engineering Industrial Hydraulics Project Management EI IT IC ME PO L01 Bio Medical & Bio Polymers PO PE L04 Financial Management PE

11 11 TIME TABLE FOR vi SEMESTER (OLD SCHEME MERCY CHANCE FOR SCHEME & 2002 TO 2005 ADMISSIONS / SUPPLEMENTARY FOR 2006 TO 2009 ADMISSIONS) (Time: 1.30 P.m. to 4.30 p.m. on all days except on Fridays and *. On Fridays 2 pm to 5 pm and *1 p.m to 5 p.m) Day & Date Subject Branch Wednesday Thursday Structural Analysis III Mechanics of Materials (M) Control Systems I Industrial Management & Economics (L,A S) PC and PC based systems (R) Principles of Management Project Management (T) Drives and Controls Dynamics of Machines (U) Avionics *Design of Steel Structures 4hrs 1 pm to 5 pm Metrology and Instrumentation (M U) Electrical Machines II Digital Communication Techniques (L) Software Engineering (R,T) Engineering Statistics and Quality Control Microprocessors and Microcontrollers (A) Industrial Electronics and Applications (S) Process Control Instrumentation I Aircraft System and Instrumentation Friday Wednesday Transportation Engineering I Thermal Engineering II (M) Electrical Power Transmission Digital Signal Processing (L,T A S) Project Management and Quality (R) Assurance Chemical Engineering III Industrial Instrumentation II Automotive Transmission (U) Theory of Vibration Water Resources Engg. I Heat and Mass Transfer (M U) Digital Signal Processing Radiation and Propagation (L) Computer Networks (R T) Biomedical and Biopolymers Industrial Instrumentation I (A) Process Instrumentation I (S) Digital Signal Processing

12 Friday Operations Research Geotechnical Engineering II Principles of Management and Engg (M U) Economics Microprocessors and Applications Electronic Instrumentation (L) Network Computing (RT) Polymer Blends and Composites Data Communication (A) Process Control (S) Control Engineering II Aircraft Structure II Quantity Surveying CAD & Manufacturing (M U) Computer Organisation Control Systems (L) Algorithm Analysis and Design (R) Polymer Processing II Personal Computer Hardware (T) Control System Theory (A) Control System II (S) Microprocessor and Microcontroller based System Design Aero Ecology and Environment * This examination will be conducted from 1 pm to 5 pm

13 13 VII Semester (New Scheme) 2010 Admission Improvement / Supplementary (Time: 1.30 P.m. to 4.30 p.m. on all days except on Friday. On Friday 2 pm to 5 pm) DAY & DATE CODE SUBJECT Branch Thursday AN Computational Fluid Dynamics AN AI VLSI AI AU & ME Design of Machine Elements AU &ME CE Design of Hydraulic Structures CE CS Web Technologies CS EE Electrical Power Transmission EE EC VLSI Design EC EI Fibre Optics and Laser Instrumentation EI IT Financial Management and E Banking IT IC Computer Control of Industrial Process IC PO Polymer Machinery, Moulds & Dies PO PE Tool Engineering and Design PE AN Experimental Stress Analysis AN AI & EI Computerised Process Control AI & EI AU Advanced Automotive Technology AU CE Environmental Engineering I CE CS Compiler Construction CS EE Synchronous Machines EE

14 14 EC Information Theory and Coding EC IT Object Oriented Modeling and Design IT Optical and Opto Electronic IC Instrumentation IC ME Dynamics of Machines ME PO Polymer Testing PO PE Operations Management PE Wednesday AN Aircraft Design AN AI , EI & IC Biomedical Instrumentation AI, EI & IC AU Auto Electrical and Electronics AU CE Design of Concrete Structures II CE CS Computer Graphics CS EE Drives and Control EE EC Microwave Engineering EC Computer Graphics and Multimedia IT Systems IT ME Gas Dynamics and Jet Propulsion ME PO Plastic Products Design & Testing PO PE Bulk Deformation Processes PE Friday AN Flight Dynamics II AN AI , EI & IC Analytical Instrumentation AI, EI & IC AU & ME Refrigeration and Air Conditioning AU & ME CE Architecture and Town Planning CE CS Object Oriented Modeling and Design CS

15 15 EE Modern Control Theory EE EC Electronic Instrumentation EC IT Internetworking IT PO Chemical Engineering IV PO PE Theory of Metal Forming PE Tuesday AN Aircraft System and Instrumentation AN AI , EI & IC Industrial Instrumentation II AI, EI & IC AU & ME Industrial Engineering AU & ME CE Transportation Engineering II CE CS Principles of Programming Languages CS EE Communication Engineering EE EC Embedded Systems EC IT Web Applications Development IT PO Tyre Technology PO Thursday PE Advanced Manufacturing Process PE AN L04 Helicopter Aerodynamics AN AI L01 Robotics AI AI L02 Real Time Systems AI L03, EC L01 & EI L01 Optimization Techniques AI, EC & EI AI L04 Fuzzy Logic AI AU L01 Vehicle Body Engineering AU AU L02 Vehicle Performance and Testing

16 16 AU L05 CE L02 CE L03 CE L04 CE L06 Industrial Safety Ground Improvement Techniques Pre Stressed Concrete Environmental Impact Assessment Traffic Engineering and Management CE CS L02 Data Mining and Data Warehousing CS CS L03 & IT L05 Operating System Kernel Design CS & IT CS L04 CS L06 Digital Image Processing Client Server Architecture and Applications CS EE L01 HVDC Transmission EE EE L02 EE L03 EE L04 EE L05 EE L06 EC L02 EC L03 EC L06 EI L04 Industrial Instrumentation Power Quality PLC Based Systems MEMS Technology Special Electrical Machines Speech and Audio Processing Digital Image Processing System Software Applied Soft Computing EC EI

17 17 EI L05 Instrumentation in Petrochemical Industries EI IT L01 Software Project Management IT IT L02 Optical Communication Networks IT L04 & CS L01 Real Time Systems IT & CS IT L06 Data Mining and Data Warehousing IT IC L04 Ultrasonic Instrumentation IC ME L01 &PE ME & PE L05 Plant Engineering and Maintenance ME L02 Turbo Machines ME L03 Theory of Vibration ME ME L04 ME L06 Sales and Marketing Management Foundry and Welding Technology PO L01 Paints and Surface Coatings PO

18 18 TIME TABLE FOR VII SEMESTER (OLD SCHEME) 2006 ADMISSION ONWARDS SUPPLEMENTARY Time: 1.30 p.m. to 4.30 p.m. on all days except on Friday and *. On Friday 2 p.m. to 5 p.m. and *1 p.m. to 5 p.m. Day & Date Subject Branch Thursday *(4hours) *Design of Concrete Structures II pm to 5 pm Gas Dynamics and Jet Propulsion (M) Electrical Machines III Micro Controller based System Design (L A) Object Oriented Modelling and Design (R T) Elective I Paint Technology Numerical Analysis Wednesday Auto Power Plant (U) Process Instrumentation II (S) Computational Fluid Dynamics Water Resources Engineering II Industrial Engineering (M U) Electrical Drives and Control VLSI Technology (L A) Computer Graphics (R T) Industrial Engineering Optoelectronic Instrumentation Analytical Instrumentation (S) Experimental Stress Analysis Transportation Engineering II Refrigeration and Air Conditioning (M U) Utilization of Electrical Power Microwave and Radar Engineering (L) Theory of Computation (R) Production Engineering Modern Communication System (T) Industrial Instrumentation II (A) Process Control Instrumentation II Data Acquisition & Communication (S) Finite Element Method

19 19 VII - (2) Friday Tuesday Architecture and Town Planning Dynamics of Machinery Control System II Optical Fibre Communication Systems Advanced Software Environments Chemical Engineering IV Multi media Techniques Process Dynamics & Control Computer Control of Processor Advanced IC Engines Computer Control of Process Flight Dynamics II (M) (L) (R) (T) (A) (U) (S) Environmental Engineering I Machine Design and Drawing I (M) System Design with Micro Controllers Information Theory and Coding (L) Web Technologies (R T) Tyre Technology Biomedical Instrumentation (A S) Elective I Mechatronics Auto Electrical/Electronics (U) Thursday Polymer Testing Elective I a) Optimization Techniques b) Optimization Techniques c) Pre-stressed Concrete d) Ground Improvement Techniques e) Concrete Technology f) Traffic Engineering and Management g) Remote Sensing and its Application h) Air Pollution Control (CMLRTAS) a) Plant Engineering and Maintenance (M) b) Welding Technology (M) c) Foundry Technology (M) d) Advanced Operations Research (M) e) Marketing and Sales Management (M) f) Computational Fluid Dynamics (M) a) HVDC Engineering b) Neural Networks c) Object Oriented Programming d) Biomedical Instrumentation Object Oriented Programming in C++ (LAS)

20 20 a) Neural Networks (L) b) Biomedical Engineering (L) Principles of Real Time Systems (LA RT) Operating System Kernol Design (R) LAN Technology (R) Windows Programming (RT) Mobile Computing (RT) Software Architecture (RT) Optical Communication (T) Fuzzy Systems (A S) Artificial Intelligence and Expert System Vehicle Body Engineering Special Type of Vehicle Power Plant Instrumentation Composite Structures Electrical Drawing Ultrasonic Instrumentation (AS) (U) (U) (S) *This examination will be conducted from 1 p.m. to 5 p.m.

21 21 VIII SEMESTER (NEW SCHEME) 2010 ADMISSION REGULAR (Time: 9.30 AM to PM on all days) DAY CODE SUBJECT BRANCH Wednesday AI010801/ EI010801/ INSTRUMENTATION SYSTEM DESIGN AI/EI/IC IC AN ROCKETS & MISSILES AN AU / DESIGN OF TRANSMISSION AU/ME ME ELEMENTS CE ADVANCED STRUCTURAL DESIGN C E CS HIGH PERFORMANCE COMPUTING CS EC WIRELESS COMMUNICATION EE POWER SYSTEM ANALYSIS EE IT WIRELESS COMMUNICATION IT EC Friday PE COMPOSITE MATERIALS & MANUFACTURING PE PO POLYMERS & ENVIRONMENT PO AI / INSTRUMENTATION IN PROCESS EI INDUSTRIES AI/EI AN INTRODUCTION TO SPACE TECHNOLOGY AN AU / OPERATIONS MANAGEMENT ME AU/ME CE BUILDING TECHNOLOGY AND MANAGEMENT C E CS / ARTIFICIAL INTELLIGENCE IT CS/IT EC COMMUNICATION NETWORKS EC EE SWITCH GEAR AND PROTECTION EE IC POWER PLANT INSTRUMENTATION IC PE PO NON-CONVENTIONAL MACHINING PROCESSES RUBBER PRODUCTS DESIGN AND TESTING PE PO

22 22 Tuesday Thursday AI COMPUTER NETWORKS AI AN AIR TRANSPORTATION AND AIR CRAFT MAINTENANCE AN AU SPECIAL TYPES OF VEHICLES AU CE ENVIRONMENTAL ENGINEERING II C E CS SECURITY IN COMPUTING CS EC LIGHT WAVE COMMUNICATION EC EE ELECTRICAL SYSTEM DESIGN EE EI ADVANCED INSTRUMENTATION AND APPLICATIONS EI IC INSTRUMENTATION & CONTROL IN PETROCHEMICAL INDUSTRIES IC IT CRYPTOGRAPHY AND NETWORK SECURITY IT ME PRODUCTION ENGINEERING ME PE MACHINE DESIGN PE PO SPECIALITY POLYMERS PO ELECTIVE III AI L01 NEURAL NETWORKS AI AI L03 EMBEDDED SYSTEMS AI AI L04 ARTIFICIAL INTELLIGENCE AI AI L05 VHDL AI AU L02 ENGINEERING ECONOMICS AND AU AUTOMOTIVE COST ESTIMATION AU L03 VEHICLE DYNAMICS AU CE L02 ENVIRONMENTAL C E GEOTECHNIQUES CE L03 EARTHQUAKE ENGINEERING AND C E DESIGN CE L04 ADVANCED HYDROLOGY AND C E SYSTEM ANALYSIS CE L05 HIGHWAY AND AIRFIELD C E PAVEMENTS CS L01 E COMMERCE CS CS L02/ GRID COMPUTING CS/IT IT L06 CS L05 MOBILE COMPUTING CS CS L06 ADVANCED NETWORKING TRENDS CS EC L01/ NANO ELECTRONICS EC/EI EI L01 EC L02 MICRO ELECTRO MECHANICAL EC/EI EI L02 SYSTEMS EC L03 SECURE COMMUNICATION EC EE L01 ADVANCED POWER SYSTEM EE EE L02 COMPUTER NETWORKS EE EE L03 GENERALIZED MACHINE THEORY EE

23 EE L05 DIGITAL SIGNAL PROCESSORS EE EE L06 OPTO ELECTRONICS EE EI L04 REAL TIME EMBEDDED SYSTEMS EI IC L03 INSTRUMENTATION AND CONTROL IN PAPER INDUSTRIES IC IT L01 SOFTWARE TESTING IT IT L02 INFORMATION RETRIEVAL IT IT L03 HIGHSPEED NETWORKS IT IT L04 NETWORK ADMINISTRATION IT AND MANAGEMENT ME L01 AEROSPACE ENGINEERING ME ME L02/ ADVANCED MACHINING ME/PE PE LO2 PROCESS ME L03/ AN G03 CRYOGENICS ME/AN Elective IV for AN ME L05/ NON DESTRUCTIVE TESTING ME/PE PE L05 ME L06 ADVANCE OPERATIONS ME RESEARCH PO L01 ADHESIVE TECHNOLOGY PO ELECTIVE IV AI G01/ EI G02/ IC G03 AI G02/ EI G03 AI G04/ EI G06/ EC G06/ IC G06 TOTAL QUALITY MANAGEMENT HUMAN FACTORS ENGINEERING PROFESSIONAL ETHICS AI/EI/IC AI/EI AI/EI/EC/IC AI G05 INDUSTRIAL POLLUTION AI CONTROL AN L04 INDUSTRIAL AERODYNAMICS AN (Elective III) AU G01 SYSTEM MODELING AND AU SIMULATION AU G05 MANAGEMENT INFORMATION AU SYSTEMS CE G01 FINITE ELEMENT ANALYSIS C E CE G02 ENVIRONMENTAL POLLUTION C E CONTROL TECHNIQUES CE G04 LAND USE PLANNING C E CE G05 NUMERICAL METHODS C E CE G06 REMOTE SENSING AND GIS C E APPLICATIONS CS G01 MULTIMEDIA TECHNIQUES CS CS G02/ NEURAL NETWORKS CS/IT

24 IT G05 CS G04/ IT G01 CS G05 EC G01 EI G01/ IC G01 24 SOFTWARE ARCHITECTURE NATURAL LANGUAGE PROCESSING TEST ENGINEERING CS/IT CS EC/EI/ IC EC G02 E LEARNING EC EC G03 MECHATRONICS EC EC G04/ EC/EI/IC EI G04/ IC G04 BIO-INFORMATICS EC G05/ INTELLECTUAL PROPERTY EC/EE/EI/IC EE G02/ EI G05/ IC G05 RIGHTS EE G01 SOFT COMPUTING TECHNIQUES EE EE G03 ADVANCED MATHEMATICS EE EE G05 DIGITAL IMAGE PROCESSING EE EE G06 DISTRIBUTED POWER SYSTEMS EE IT G03 AD HOC AND SENSOR IT NETWORKS IT G04 ELECTRONIC BUSINESS AND IT SERVICES ME G01/ INDUSTRIAL SAFETY ME/PE PE G01 ME G02/ DISASTER MANAGEMENT ME/PE PE G02 ME G03/ NANO TECHNOLOGY ME/PE PE G03 ME G04 FINITE ELEMENT ANALYSIS ME ME G05/ OPTIMIZATION METHODS IN ME/PE PE G05 DESIGN ME G06 PETROCHEMICAL ENGINEERING ME PO G01 FIBRE TECHNOLOGY PO

25 TIMETABLE FOR VIII SEMESTER (OLD SCHEME) (MERCY CHANCE FOR SCHEME / 2002 TO 2005 ADMISSIONS & SUPPLEMENTARY FOR 2006 TO 2009 ADMISSIONS) (Time: 9.30 am to pm on all days except *. * 9 am to 1 pm) Day & Date Subject Branch Wednesday * Advanced Structural Design (4 hrs 9 AM to 1 PM) ( C ) 25 Friday Tuesday Production Engineering Power Systems Analysis Computer Networks Security in Computing Adhesive Technology (Elective II) Optimization Techniques Rockets and Missiles Finite Element Analysis Automobile Engineering Switchgear and Protection Advanced Communication Systems High Performance Computing Computer Aided Design & Manufacture Information Systems and Management Modern Control Theory Analysis and Design Instrumentation Systems Analytical Instruments Vehicle Dynamics Introduction to Space Technology Building Technology and Management Production Planning and Control Instrumentation Advanced Microprocessors Principles of Programming Languages Fibre Technology E-Commerce Biomedical Instrumentation Engine & Drive Line Design Air Transportation and Aircraft Maintenance M,U E LAS RT P N F C M E L R P T A S N U F C M E LAS R P T N U F

26 26 Thursday Environmental Engineering II Machine Design and Drawing II Electrical System Design Television Engineering Artificial Intelligence Polymers & Environment Computerised Process Control Fibre Optics & Laser Instrumentation Instrumentation System Design Vehicle Transport Management Project Management and Total Quality Management Polymer Product Design Elective II 1. Highway and Airfield Pavements 2. Advanced Hydrology 3. Applied Geology 4. Theory of Shells 5. Industrial Waste Engineering 1. Aerospace Engineering 2. Project Management 3. Programming in C++ and Visual C++ 4.Expert systems in Manufacturing 5.Silicates-Structure Particle Analysis and Spray Coating 1. Robotics 2. Advanced Power Systems 3. Advanced Microprocessors 4. System Software 5. Advanced Power Electronic Systems Advanced Mathematics Medical Electronics 1. VHDL 2. Advanced Micro-controllers 3. E-Commerce E-Commerce 1. Client Server Computing 2. Distributed Computing 3. User Interface Design C M E L RT P A S N U F P C M E CMELRT L LA R RT

27 Wednesday High Performance Computing Satellite and Mobile Communication Robotics Neural Networks VLSI Technology Power Plant Instrumentation 1. Engineering Economics & Automotive Cost Estimation 2. Project Management Air Navigation Elective III 1. Traffic and Transportation Planning 2. Environmental Impact Analysis 3. Structural Dynamics and Stability Analysis 4. Environmental Geotechniques 5. Soil Stability Analysis 1. Management Information Systems 2. Cryogenics 3. Total Quality Management 4. Finite Element Analysis 5. Nuclear Engineering 6. Machine Vision and Application 1. Digital Protection of Power Systems 2. Insulation Technology 3.Computer Networks 4. Optoelectronics and Communication 5. VLSI Technology 6. Artificial Intelligence and Expert Systems 1. Advanced Digital Signal Processing 2. System Software 1. Multimedia Systems 2. Embedded Systems 3. Digital Image Processing 1. Embedded Systems 2. Neural Networks 3. Advanced Networking Trends 4. Biometrics T A AS S N U F C M E LA LASR RT 5. Data Processing & Analysis Techniques

28 28 Fuzzy Systems 1. Robotics & Automation 2. Instrumentation in Petrochemical Industry Intelligent Control Systems Vehicle Maintenance Speciality Polymers Boundary Layer Theory T S N U P F Sd/- P.D. Hills, Dr. M. THOMAS JOHN Controller of Examinations Symbols used: (New Scheme) 1. Applied Electronics and Instrumentation Engineering. AI 2. Aeronautical Engineering. AN 3. Automobile Engineering. AU 4. Civil Engineering. CE 5. Computer Science and Engineering. CS 6. Electronics and Communication Engineering. EC 7. Electrical and Electronics Engineering EE 8. Electronics & Instrumentation Engineering. EI 9. Instrumentation and Control Engineering. IC 10. Information Technology IT 11. Mechanical Engineering. ME 12. Polymer Engineering. PO 13. Production Engineering. PE 14. Chemical Engineering CH 15. Naval Architecture and Ship Building Engineering ST Symbols used: (Old Scheme) A Applied Electronics and Instrumentation E Electrical and Electronics M Mechanical P Polymers S Electronics and Instrumentation U Automobile Engineering C Civil L Electronics and Communication

29 29 N Instrumentation and Control R Computer Science and Engineering T Information Technology F Aeronautical Engineering To 1. The Principals of the Colleges concerned/regional Director, STAS, Pullarikkunnu. 2. PRO/Enquiry 3. PS to VC/PVC 4. JR II/IV/DR II/VIII/AR III/XI/XVII/XVIII/XXI/Pool Officer (Exams.)/ System Administrator 5. PA to C.E./C.E s Sn./CT&D Sn/Mon.Cell/CV Cell/Uty.Information Centres 6. EB/Tabulations sections concerned/cetex/front Office/Ac.C 7. SF/FC Approved for Issue SECTION OFFICER

ANNA UNIVERSITY CHENNAI - 25

ANNA UNIVERSITY CHENNAI - 25 I M.E-Aeronautical Engineering Page : 1 of 17 071180013:AERODYNAMICS - II Wednesday 071180021:BOUNDARY LAYER THEORY 071180027:COMPUTER METHODS IN ENGINEERING Wednesday 071180022:FATIGUE AND FRACTURE MECHANICS

More information

Subject Name. Exam Date. Session CONTROLLER OF EXAMINATIONS

Subject Name. Exam Date. Session CONTROLLER OF EXAMINATIONS CY2111 GE2111 GE2112 HS2111 MA2111 PH2111 CY2161 GE2151 HS2161 MA2161 ME2151 PH2161 AE22 AE22 AE22 AE22 MA2211 ME22 AE2251 AE2252 AE2253 AE2254 AE2255 MA2264 AE23 AE23 AE23 AE23 EE2365 GE21 AE21 AE22 AE23

More information

CONTROLLER OF EXAMINATIONS

CONTROLLER OF EXAMINATIONS B.Arch. and B.Arch.(Interior Design) Marine /B.Tech(Co mmon to all branches) (Incorporating the First and Second Rescheduling and Changes and Additions - I,, I and IV) For candidates admitted in Anna University

More information

GOVERNMENT COLLEGE OF TECHNOLOGY NOV / DEC 2013 TIME TABLE BATCHES : 2003-2007 B.E. / B.TECH. DEGREE : FULL TIME & PART TIME 2003 REGULATION

GOVERNMENT COLLEGE OF TECHNOLOGY NOV / DEC 2013 TIME TABLE BATCHES : 2003-2007 B.E. / B.TECH. DEGREE : FULL TIME & PART TIME 2003 REGULATION GOVERNMENT COLLEGE OF TECHNOLOGY NOV / DEC 2013 TIME TABLE BATCHES : 2003-2007 B.E. / B.TECH. DEGREE : FULL TIME & PART TIME 2003 REGULATION SESSION Government College of Technology, Coimbatore - 641 013

More information

List of courses covered under each stream

List of courses covered under each stream List of courses covered under each stream Chemical Engineering & Allied S. No. COURSE 1 ADVANCED MATERIALS TECHNOLOGY 2 BIOCHEMICAL ENGINEERING 3 BIOCHEMICAL ENGINEERING AND BIOTECHNOLOGY 4 BIOMEDICAL

More information

B.E. (OLD) (All Branches) Term-I & II Examinations,May/June, 2016

B.E. (OLD) (All Branches) Term-I & II Examinations,May/June, 2016 (OLD) (All Branches) Term-I & II NORTH MAHARASHTRA UNIVERSITY, JALGAON Circular No. 108 of 2016 Programme of [ All Branches ( Term-I & II ) Course:Jully 2008 Examinations, May/June, 2016 1) Candidates

More information

GUJARAT TECHNOLOGICAL UNIVERSITY

GUJARAT TECHNOLOGICAL UNIVERSITY Subject Code Subject Name Date Time Branch 01: Aeronautical Engineering 160101 Aerodynamics-II 24-05-2013 10:30 To 01:00 160102 Fundamentals of Jet Propulsion 27-05-2013 10:30 To 01:00 160103 Vibration

More information

EXAMINATION TIMETABLE B.E. (SEM.-VII) (OLD) (ALL BRANCHES) EXAMINATIONS SECOND HALF 2015

EXAMINATION TIMETABLE B.E. (SEM.-VII) (OLD) (ALL BRANCHES) EXAMINATIONS SECOND HALF 2015 EXAMINATION TIMETABLE B.E. (SEM.-VII) (OLD) (ALL BRANCHES) EXAMINATIONS SECOND HALF 2015 TIME: 11:00am to 02:00pm DAY THURSDAY MONDAY THURSDAY SATURDAY TUESDAY DATE 10 TH December,2015 14 ST December,

More information

Diploma in Electrical Engineering DEE

Diploma in Electrical Engineering DEE Diploma in Electrical Engineering DEE Electrical Engg. Electric Circuit Power Generation Basic Electronics Solid State Devices & Circuits Switching Theory & Logic Design I Electro Magnetic fields Analog

More information

College of Engineering Distance Education Graduate Degree Programs, Degree Requirements and Course Offerings

College of Engineering Distance Education Graduate Degree Programs, Degree Requirements and Course Offerings College of Engineering Distance Education Graduate Degree Programs, Degree Requirements and Course Offerings Master of Engineering Program Requirements: The student must complete a total of 30 credit hours

More information

(Electrical/Electronics Engineering/Computer Sciences, Information and Systems Technology

(Electrical/Electronics Engineering/Computer Sciences, Information and Systems Technology Science Direct (Electrical/Electronics Engineering/Computer Sciences, Information and Systems Technology Information Sciences / Mechanical Engineering and CIVIL Engineering Chem & Biotech) Solid-State

More information

Effective for Fall 2013 Onwards

Effective for Fall 2013 Onwards Honors Program Degree Requirements Effective for Fall 2013 Onwards College: Engineering Honors Program Degree Requirements:. Honors Students are requested to fulfill a minimum of 24 CH of Honors courses.

More information

Eligibility Qualifications for admission to M.E./M.Tech./M.Arch./M.Plan. degree programmes through single window counselling

Eligibility Qualifications for admission to M.E./M.Tech./M.Arch./M.Plan. degree programmes through single window counselling Eligibility Qualifications for admission to M.E./M.Tech./M.Arch./M.Plan. degree programmes through single window counselling I. FACULTY OF CIVIL ENGINEERING B.E. / B.Tech 2. Chemical 3. Geoinformatics

More information

NATIONAL SUN YAT-SEN UNIVERSITY

NATIONAL SUN YAT-SEN UNIVERSITY NATIONAL SUN YAT-SEN UNIVERSITY Department of Electrical Engineering (Master s Degree, Doctoral Program Course, International Master's Program in Electric Power Engineering) Course Structure Course Structures

More information

Regulations: R 2013. Printing Tech. PTMA8251 Numerical Methods. PTME8251 Mechanics of Machines. PTCE 8252 Strength of Materials PTEC 8251 Electronics

Regulations: R 2013. Printing Tech. PTMA8251 Numerical Methods. PTME8251 Mechanics of Machines. PTCE 8252 Strength of Materials PTEC 8251 Electronics Regulations: R 2013 ANNA UNIVERSITY:: CHENNAI 600 025. B.E./B.Tech. (Part Time) Degree Examinations, Nov Dec 2013 Regular Examinations Semester. No.: II Time Table Time: 9.30 A.M. to 12.30 P.M 11.11.2013

More information

MAHATMA GANDHI UNIVERSITY. Kottayam, Kerala

MAHATMA GANDHI UNIVERSITY. Kottayam, Kerala MAHATMA GANDHI UNIVERSITY Kottayam, Kerala B.Tech. Degree Courses 2010-2011 Revised Scheme and Syllabus And Syllabus for Combined I & II Sem Contents 1. Course Regulations of B.Tech. Degree Courses (With

More information

ADMISSION TO PG (MBA / MCA / M.E. / M.TECH. / M.ARCH. / M.PLAN) DEGREE COURSES 2014-2015

ADMISSION TO PG (MBA / MCA / M.E. / M.TECH. / M.ARCH. / M.PLAN) DEGREE COURSES 2014-2015 DEPARTMENT OF TECHNICAL EDUCATION : CHENNAI 600 025 ADMISSION TO PG (MBA / MCA / M.E. / M.TECH. / M.ARCH. / M.PLAN) DEGREE COURSES 2014-2015 ELIGIBLE QUALIFICATION(S) FOR PG DEGREE COURSES PRESCRIBED BY

More information

Departments and Specializations

Departments and Specializations Departments and Specializations Department Post Specialization Areas Aerospace Engineering: Only candidates with a clear focus on one or more of the specified areas will be considered Experimental Structural

More information

MTech / ME / MArch / MBA (Infrastructure Management) COURSE-WISE ELIGIBILITY ( ) APPENDIX - VI. Code 01

MTech / ME / MArch / MBA (Infrastructure Management) COURSE-WISE ELIGIBILITY ( ) APPENDIX - VI. Code 01 01 02 03 04 05 06 08 09 11 12 13 14 AERONAUTCAL AUTOMOTIVE TECHNOLOGY Bio-Medical Electronics and Industrial Instru. Bio-Medical Signal Processing and Instrumentation Intelligent Systems CHEMICAL COMMUNICATION

More information

Poznan University of Technology Faculty of Electrical Engineering

Poznan University of Technology Faculty of Electrical Engineering Poznan University of Technology Faculty of Electrical Engineering Contact Person: Pawel Kolwicz Vice-Dean Faculty of Electrical Engineering pawel.kolwicz@put.poznan.pl List of Modules Academic Year: 2015/16

More information

Master of Science (Electrical Engineering) MS(EE)

Master of Science (Electrical Engineering) MS(EE) Master of Science (Electrical Engineering) MS(EE) 1. Mission Statement: The mission of the Electrical Engineering Department is to provide quality education to prepare students who will play a significant

More information

Elsevier Science Direct E- Journals (Computer Science & Engineering) 2016

Elsevier Science Direct E- Journals (Computer Science & Engineering) 2016 Elsevier Science Direct E- Journals (Computer Science & Engineering) 2016 ISSN Number Journal Title 0038-1101 Solid-State Electronics 0967-0661 Control Engineering Practice 0968-090X Transportation Research

More information

REVISED AS ON 26/04/2016

REVISED AS ON 26/04/2016 SAVITRIBAI PHULE PUNE UNIVERSITY (Formerly University of Pune) Examination Circular No 127 Of 2016 REVISED AS ON 26/04/2016 BACHELOR OF ENGINEERING (2008 & 2012 COURSE) Examination of APR/MAY 2016 Instruction

More information

ANNA UNIVERSITY, CHENNAI TIME TABLE

ANNA UNIVERSITY, CHENNAI TIME TABLE NA UNIVERSITY, CHENNAI - 600 5 TIME TABLE - B.E/B.Tech.(R-20)/B.Arch(R-2009) DEGREE EXAMINATIONS -Nov/Dec - 23 Tiruchirappalli in 20, 2009 & 20 Branch Name B.Arch. History Of Architecture And Culture I

More information

Bachelor of Technology in

Bachelor of Technology in Course Structure and Detailed Syllabus for Bachelor of Technology in Civil Engineering Computer Science & Engineering Electrical Engineering Electronics & Communication Engineering Information Technology

More information

Department of CSE. Jaypee University of Information Technology, Waknaghat. Course Curricula

Department of CSE. Jaypee University of Information Technology, Waknaghat. Course Curricula Department of CSE Jaypee University of Information Technology, Waknaghat Course Curricula This document contains the Course Curricula for the following courses offered in the Department of CSE : B.Tech.

More information

Curriculum of Electronics Engineering Program

Curriculum of Electronics Engineering Program Curriculum of Electronics Engineering Program FIRST ACADEMIC SEMESTER EB 0101 Workshop on Methods of University Studies 2 -- -- -- 4 EB 0102 Workshop on Oral and Written Communications 2 -- -- -- 4 EB

More information

Assistant Professor: Rs.12,000-420-18,300/- plus allowances as admissible to Central Government employees.

Assistant Professor: Rs.12,000-420-18,300/- plus allowances as admissible to Central Government employees. Indian Institute of Technology Kharagpur 721302 Faculty Openings The Institute invites applications from Indian nationals, possessing excellent academic background, commitment to quality teaching and potential

More information

List of Companies. Sr. no. courses Analog Electronic Circuits (1) (2) Transform Techniques For Signal

List of Companies. Sr. no. courses Analog Electronic Circuits (1) (2) Transform Techniques For Signal Sr. no (1) Name courses Analog Electronic Circuits of Career Prospects of Courses Biomedical instrumentation, mobiles, digital clock, formation of various electronics devices, sensors, clock, timers, switches,

More information

MINOR CURRICULA. Minor Curricula Page 1

MINOR CURRICULA. Minor Curricula Page 1 MINOR CURRICULA This Document contains the Senate Approved Minor Curricula for various disciplines. For the exact subject numbers please refer to the UG curriculum available on the Institute Web Site/ERP.

More information

Bachelor of Science (BSc), Information Technology (IT) Semester-based Layout of the Program

Bachelor of Science (BSc), Information Technology (IT) Semester-based Layout of the Program DEGREE PROGRAMS OUTLINE Advanced School of Systems and Data Studies (ASSDAS) Bachelor of Science (BSc), Information Technology (IT) Semester-based Layout of the Program PROGRAM Information Technology QUALIFICATION

More information

Engineering Technology Division

Engineering Technology Division 93 xxx The Engineering Technology division of the Higher Colleges of Technology offers a wide range of programs at the Diploma, Higher Diploma and Bachelor of Applied Science levels. These programs prepare

More information

PPIMT DATE SHEET GJU EXAMINATION DEC. 2014 M = Morning (10:00 A.M. to 01:00 P.M.) And E = Evening (02:00 P.M to 05:00.P.M.) Sr./I.D No.

PPIMT DATE SHEET GJU EXAMINATION DEC. 2014 M = Morning (10:00 A.M. to 01:00 P.M.) And E = Evening (02:00 P.M to 05:00.P.M.) Sr./I.D No. PPIMT DATE SHEET GJU EXAMINATION DEC. 2014 M = Morning (10:00 A.M. to 01:00 P.M.) And E = Evening (02:00 P.M to 05:00.P.M.) Date of Exams. Class Paper code Nomenclature Sr./I.D No. Sessi on 08.12.2014

More information

DEPARTMENT OF TECHNICAL EDUCATION

DEPARTMENT OF TECHNICAL EDUCATION DEPARTMENT OF TECHNICAL EDUCATION From The Commissioner of Technical Education Directorate of Technical Education Guindy Chennai-600025 To The Principals of Government, Government Aided and Self Financing

More information

ELIGIBILITY FOR ADMISSION TO VARIOUS PROGRAMS (TENTATIVE)

ELIGIBILITY FOR ADMISSION TO VARIOUS PROGRAMS (TENTATIVE) ELIGIBILITY FOR ADMISSION TO VARIOUS PROGRAMS (TENTATIVE) B.E./ B. Tech./B. Arch. Programs Sl. No. Course Eligibility B.E./ B.Tech. B.Arch. Bachelor of / Bachelor of Bachelor of Architecture a) Second

More information

Types of Engineering Jobs

Types of Engineering Jobs What Do Engineers Do? Engineers apply the theories and principles of science and mathematics to the economical solution of practical technical problems. I.e. To solve problems Often their work is the link

More information

Revistas IEEE ANII 2009

Revistas IEEE ANII 2009 Revistas IEEE ANII 2009 Advanced Packaging, IEEE Transactions on Aerospace and Electronic Systems Magazine, IEEE Aerospace and Electronic Systems, IEEE Transactions on American Institute of Electrical

More information

BACHELOR OF SCIENCE IN ELECTRICAL AND ELECTRONIC ENGINEERING DEGREE PROGRAMME

BACHELOR OF SCIENCE IN ELECTRICAL AND ELECTRONIC ENGINEERING DEGREE PROGRAMME SEMESTER 1 BACHELOR OF SCIENCE IN ELECTRIL AND ELECTRONIC ENGINEERING DEGREE PROGRAMME CE 101 Structural Mechanics I C 3 3/4 CE 10 Fluid Mechanics I C 3/4 EE 101 Electrical Engineering C 3/4 EE 10 Electronics

More information

NATIONAL INSTITUTE OF TECHNOLOGY, TIRUCHIRAPPALLI-620015

NATIONAL INSTITUTE OF TECHNOLOGY, TIRUCHIRAPPALLI-620015 NATIONAL INSTITUTE OF TENOLOGY, TIRUIRAPPALLI-620015 Tentative Vacancy Position for SPOT Admission 2015 for M.Tech Programme Sl.No. Department Specialization Group OC OBC SC ST OCPWD OBCPWD SCPWD STPWD

More information

COMPUTER ENGINEERING GRADUTE PROGRAM FOR MASTER S DEGREE (With Thesis)

COMPUTER ENGINEERING GRADUTE PROGRAM FOR MASTER S DEGREE (With Thesis) COMPUTER ENGINEERING GRADUTE PROGRAM FOR MASTER S DEGREE (With Thesis) PREPARATORY PROGRAM* COME 27 Advanced Object Oriented Programming 5 COME 21 Data Structures and Algorithms COME 22 COME 1 COME 1 COME

More information

MASTER OF ENGINEERING Mechanical Engineering Program

MASTER OF ENGINEERING Mechanical Engineering Program MASTER OF ENGINEERING Mechanical Engineering Program Note: On-line registration is available to CURRENT M.Eng. students only. NEW students are NOT permitted to register on-line for their first semester.

More information

Autumn Semester Examination-December, 2015

Autumn Semester Examination-December, 2015 Time Table Date: 10.12.2015 Course Branch Sem. Paper B. Tech EC I Remedial English Language EI I EE I CSE I IT I ME I B. Pharm I Remedial Biology/ Remedial Mathematics MBA BE I Research Methodology F&C

More information

UNIVERSITY OF CALICUT (Pareeksha Bhavan) REVISED TIME TABLE FOR THE I SEMESTER M.TECH. ENGINEERING SUPPLEMENTARY EXAMINATION JANUARY 2016

UNIVERSITY OF CALICUT (Pareeksha Bhavan) REVISED TIME TABLE FOR THE I SEMESTER M.TECH. ENGINEERING SUPPLEMENTARY EXAMINATION JANUARY 2016 UNIVERSITY OF CALICUT (Pareeksha Bhavan) REVISED TIME TABLE FOR THE I SEMESTER M.TECH. ENGINEERING SUPPLEMENTARY EXAMINATION JANUARY 2016 Time of Examination Maximum Marks : 1.30 pm to 4.30 pm (Except

More information

Eligibility Matrix for admission to MTech./MArch./MPlan./MDes./MURP/MBA Programmes under DASA-2015. NIT Agartala

Eligibility Matrix for admission to MTech./MArch./MPlan./MDes./MURP/MBA Programmes under DASA-2015. NIT Agartala Eligibility Matrix for admission to MTech./MArch./MPlan./MDes./MURP/MBA Programmes under DASA-2015 (All other criteria for admission are as per DASA-2015 norms). NIT Agartala Sl No. Department Postgraduate

More information

2014 Voluntary Page and Overlength Article Charges

2014 Voluntary Page and Overlength Article Charges 2014 and NOTE: page charges do not apply to open access articles. Title Aerospace & Electronic $200 10 4 Aerospace & Electronic Affective Computing Annals of the History of Computing Antennas & Propagation

More information

Coursework for MS leading to PhD in Electrical Engineering. 1 Courses for Digital Systems and Signal Processing

Coursework for MS leading to PhD in Electrical Engineering. 1 Courses for Digital Systems and Signal Processing work for MS leading to PhD in Electrical Engineering 1 s for Digital Systems and Signal Processing EE 801 Analysis of Stochastic Systems EE 802 Advanced Digital Signal Processing EE 80 Advanced Digital

More information

GUJARAT TECHNOLOGICAL UNIVERSITY Computer Engineering (07) BE 1st To 8th Semester Exam Scheme & Subject Code

GUJARAT TECHNOLOGICAL UNIVERSITY Computer Engineering (07) BE 1st To 8th Semester Exam Scheme & Subject Code GUJARAT TECHNOLOGICAL UNIVERSITY Computer Engineering (07) BE 1st To 8th Semester Scheme & EVALUATION SCHEME Continuous (Theory) (E) Evaluation Practical (I) (Practical) (E) Process(M) MAX MIN MAX MIN

More information

Technical Elective I 3 0 3 Technical Elective II 3 1 4 Technical Elective III 3 0 3 Technical Elective IV 3 0 3 3 0 3

Technical Elective I 3 0 3 Technical Elective II 3 1 4 Technical Elective III 3 0 3 Technical Elective IV 3 0 3 3 0 3 BE Degree Requirements for Fall 06 Intake (Avionics Majors) Required edit (Minimum ) English-I 3 0 3 English-I (Proficiency) (2+1) English-II 3 0 3 English-II (Written Communication) (2+1) Oral Communication

More information

NATIONAL INSTITUTE OF TECHNOLOGY WARANGAL 506 004, (T.S.) INDIA

NATIONAL INSTITUTE OF TECHNOLOGY WARANGAL 506 004, (T.S.) INDIA NATIONAL INSTITUTE OF TECHNOLOGY WARANGAL 506 004, (T.S.) INDIA Advt. No Admn 01/2015 ADVERTISEMENT FOR RECRUITMENT OF FACULTY POSITIONS The National Institute of Technology, Warangal invites applications

More information

Class of 2016 Second Year Common CORE - 2013-2014

Class of 2016 Second Year Common CORE - 2013-2014 2013-2014 Engineering and Applied Science Calendar Class of 2016 Second Year Common CORE - 2013-2014 APSC 200 Engineering Design and Practice II F 3-0-1 4 APSC 293 Engineering Communications F.25-0-.75

More information

Integrated Dual Degree B. Tech. + M. Tech. / MBA - I Semester S. No. Subject Code Name of Subject L-T-P Credits Theory Subjects 3-1-0 4

Integrated Dual Degree B. Tech. + M. Tech. / MBA - I Semester S. No. Subject Code Name of Subject L-T-P Credits Theory Subjects 3-1-0 4 Integrated Dual Degree B. Tech. + M. Tech. / MBA - I Semester 1 PH 102 / Engineering Physics / CY 101 Engineering Chemistry 2 MA 101 Mathematics I 3 CE 101 Engineering Mechanics 2-1-0 3 4 CS 101 Computer

More information

Qualifying Degree and Seat Matrix for admission to M.Tech. (Part Time and Sponsored)

Qualifying Degree and Seat Matrix for admission to M.Tech. (Part Time and Sponsored) Qualifying Degree and Seat Matrix for admission to M.Tech. (Part Time and Sponsored) Department Programme Qualifying Degree Part Time Sponsored Applied Mechanics Applied Mechanics Aeronautical 00 05 Aerospace

More information

Civilian Institution PU411 School of International and Public Affairs FALL Public Project Management and Evaluation PU413 School of International and

Civilian Institution PU411 School of International and Public Affairs FALL Public Project Management and Evaluation PU413 School of International and Course Course ID School Delivering Course NOTE Semester Discrete Control System AU303 School of Electrical and Information Engineering English FALL Communication Principles ES311 School of Electrical and

More information

EXAMINATION SCHEDULE FOR MCA I SEMESTER BACK PAPER EXAMINATION JULY 2015

EXAMINATION SCHEDULE FOR MCA I SEMESTER BACK PAPER EXAMINATION JULY 2015 EXAMINATION SCHEDULE FOR MCA I SEMESTER 25.06.2015 THURSDAY 10 AM to 1 PM TCA 513 Procedure Oriented Programming using C 26.06.2015 FRIDAY 10 AM to 1 PM TCA 514 Combinatorics and Graph Theory 2- All Notice

More information

Subscription Order Form

Subscription Order Form STM JOURNALS STM JOURNALS STM (Scientific, Technical and Medical) Journals www.stmjournals.com Subscription Order Form International Rates (Year - 2014) The Publisher, STM Journals (Subscriptions), Consortium

More information

SECOND YEAR. Major Subject 3 Thesis (EE 300) 3 Thesis (EE 300) 3 TOTAL 3 TOTAL 6. MASTER OF ENGINEERING IN ELECTRICAL ENGINEERING (MEng EE) FIRST YEAR

SECOND YEAR. Major Subject 3 Thesis (EE 300) 3 Thesis (EE 300) 3 TOTAL 3 TOTAL 6. MASTER OF ENGINEERING IN ELECTRICAL ENGINEERING (MEng EE) FIRST YEAR MASTER OF SCIENCE IN ELECTRICAL ENGINEERING (MS EE) FIRST YEAR Elective 3 Elective 3 Elective 3 Seminar Course (EE 296) 1 TOTAL 12 TOTAL 10 SECOND YEAR Major Subject 3 Thesis (EE 300) 3 Thesis (EE 300)

More information

Career Point University, Kota (Raj.)

Career Point University, Kota (Raj.) Career Point University, Kota (Raj.) Schedule of Re-MajorExamination 2015- B.Tech. (1 st Semester) Time/Shift Cycle Section A and B Cycle- Section D and E Mechanics Fundamental of Electrical (AML-110)

More information

Name of the. Test code. Programme 1 M.Tech. (Civil Engg.)

Name of the. Test code. Programme 1 M.Tech. (Civil Engg.) ------------------------------------------------------------------ ELIGIBILITY CRITERIA OF M.TECH./M.PHARM PROGRAMMES FOR JNTUH FOR THE ACADEMIC YEAR 2014-15 S.No PG Programme 1 M.Tech. (Civil Engg.) s

More information

REGULATIONS 2015 (CBCS) B.TECH. INFORMATION TECHNOLOGY CURRICULUM - SYLLABUS SEMESTER I

REGULATIONS 2015 (CBCS) B.TECH. INFORMATION TECHNOLOGY CURRICULUM - SYLLABUS SEMESTER I REGULATIONS 2015 (CBCS) B.TECH. INFORMATION TECHNOLOGY CURRICULUM - SYLLABUS SEMESTER I Code No. Course Title L T P C BEN101 Technical English I 3 0 0 3 BMA101 Mathematics -I 3 0 0 3 BPH101 Engineering

More information

Department of Electronics & Communication Engineering Bundelkhand Institute of Engineering & Technology, Jhansi

Department of Electronics & Communication Engineering Bundelkhand Institute of Engineering & Technology, Jhansi Department of Electronics & Communication Engineering Bundelkhand Institute of Engineering & Technology, Jhansi Mission: To provide knowledgeable, principled and inspiring Engineers for the future society

More information

UNIVERSITY OF PUNE. ONLINE EXAM CELL Fax : 020-25601206 Ganeshkhind, Pune - 411 007

UNIVERSITY OF PUNE. ONLINE EXAM CELL Fax : 020-25601206 Ganeshkhind, Pune - 411 007 UNIVERSITY OF PUNE Phone : 020-25601229 ONLINE EXAM CELL Fax : 020-25601206 Ganeshkhind, Pune - 411 007 Email : osd_engg@pun.unipune.ac.in Maharashtra (INDIA) Web : http://www.unipune.ac.in Ref.:OEC/ 45

More information

NED University of Engineering and Technology MECHANICAL DESIGN. Master of Engineering in. Mechanical Engineering Department. Courses Offered.

NED University of Engineering and Technology MECHANICAL DESIGN. Master of Engineering in. Mechanical Engineering Department. Courses Offered. MECHANICAL DESIGN 1. Masters program in Mechanical Engineering with specialization in DESIGN field empowers the student with the required skill set for the job market as well as for further studies. 2.

More information

TJU master of Urban Planning in English

TJU master of Urban Planning in English TJU master of Urban Planning in English The design courses were the most important course for the three majors to improve the students' comprehensive ability, the ability to analyze the question, propose

More information

Recommended Courses by ECE Topic Area

Recommended Courses by ECE Topic Area Recommended Courses by ECE Topic Area Undergraduate Students: Verify a course is an approved Science/Math/Engineering Elective or Technical Elective for your major. Graduate Students: A maximum of 6 credits

More information

Program Academic program code

Program Academic program code 4101 Aerospace Engineering (4 Years, Bachelor of Technology) 4102 Agricultural and Food Engineering (4 Years, Bachelor of Technology) 4103 Biological Sciences and Bioengineering (4 Years, Bachelor of Technology)

More information

Core Subjects (CS) Compulsory Subjects (CPS) Optional Subjects (OS)

Core Subjects (CS) Compulsory Subjects (CPS) Optional Subjects (OS) UNDERGRADUATE DEGREE PROGRAMME IN MECHANICAL ENGINEERING School of Industrial Engineering, Albacete. Higher Technical School of Industrial Engineering, Ciudad Real and Polytechnic University School, Almadén

More information

Career Point University, Kota (Raj.)

Career Point University, Kota (Raj.) Schedule of Summer Semester Examination 2015- B.Tech. (1 st Year) Date & Day Time Shift Cycle- 1 st July 2 nd July 4 th July 5 th July 6 th July Engg. Mechanics (AML-110) ntroduction to Computer & Programming

More information

Depth and Excluded Courses

Depth and Excluded Courses Depth and Excluded Courses Depth Courses for Communication, Control, and Signal Processing EECE 5576 Wireless Communication Systems 4 SH EECE 5580 Classical Control Systems 4 SH EECE 5610 Digital Control

More information

BACHELOR OF TECHNOLOGY (B.Tech) CSE - IBM Cloud. School Program Date Time Course Code Course Name

BACHELOR OF TECHNOLOGY (B.Tech) CSE - IBM Cloud. School Program Date Time Course Code Course Name GALGOTIAS UNIVERSITY Uttar Pradesh SCHEDULE FOR END TERM EXAMINATION SEMESTER - VI (Winter Sem. - 2015/16) (9-24 MAY 2016) BACHELOR OF TECHNOLOGY (B.Tech) CSE SCSE B.Tech CSE VI Sem 18.05.2016 01.30 p.m

More information

DATE SHEET - EXAMINATION JUN-2012 DATESHEET FOR DIPLOMA II SEM ALL BRANCHES DATESHEET FOR DIPLOMA ECE III SEM DATESHEET FOR DIPLOMA ECE IV SEM

DATE SHEET - EXAMINATION JUN-2012 DATESHEET FOR DIPLOMA II SEM ALL BRANCHES DATESHEET FOR DIPLOMA ECE III SEM DATESHEET FOR DIPLOMA ECE IV SEM DATE SHEET - EXAMINATION JUN-2012 DATESHEET FOR DIPLOMA I SEM ALL BRANCHES DATE TIME SUBJECT COMMUNICATION SKILLS - I APPLIED MATHEMATICS I APPLIED PHYSICS I APPLIED CHEMISTRY-I BASICS OF INFORMATION TECHNOLOGY

More information

What can I do with this degree?

What can I do with this degree? What can I do with this degree? ANY ENGINEERING DISCIPLINE Production Sales and Marketing Management Consulting Research and Development Teaching Law AEROSPACE Propulsion Fluid Mechanics Thermodynamics

More information

Mk- Ckh vkj vecksmdj jk"vªh; izks ksfxdh lalfkku] tkyu/kj &144011 Dr B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY, JALANDHAR - 144011

Mk- Ckh vkj vecksmdj jkvªh; izks ksfxdh lalfkku] tkyu/kj &144011 Dr B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY, JALANDHAR - 144011 Mk- Ckh vkj vecksmdj jk"vªh; izks ksfxdh lalfkku] tkyu/kj &144011 Dr B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY, JALANDHAR - 144011 Admission to Ph D Programmes 2013-2014 (Starting from January-2014)

More information

GOA UNIVERSITY. Scheme of Instruction Hrs/Week

GOA UNIVERSITY. Scheme of Instruction Hrs/Week GOA UNIVERSITY SECOND/THIRD YEAR OF BACHELOR S DEGREE COURSE IN COMPUTER SEMISTER III Sub Code CE3.1 AM3 Applied Mathematics III 3 1 0 3 100 20+5 125 CE3.2BC++ Basics of C++ 3 1 2 3 100 20+5 50 175 CE3.3PPL

More information

What can I do with a degree in... Engineering

What can I do with a degree in... Engineering What can I do with a degree in... Engineering The Department of Physics offers a spectrum of courses reflective of both the integral character of physics in the liberal arts curriculum and its essential

More information

Aerospace Engineering

Aerospace Engineering West Virginia University 1 Aerospace Engineering Aerospace Engineering Aerospace travel, space exploration, and flight of manned or unmanned vehicles continue to gain significance. Aerospace engineering

More information

Foundation Year for Engineering, Physics and Geophysics. Faculty of Engineering, Science and Mathematics

Foundation Year for Engineering, Physics and Geophysics. Faculty of Engineering, Science and Mathematics Foundation Year for Engineering, Physics and Geophysics Faculty of Engineering, Science and Mathematics Development of electronic technology Who is the course for? The Foundation Year is the first year

More information

Bachelor of Technology (Computer Engineering.) Scheme of Courses/Examination. (3 rd SEMESTER) 1 HUT-211 Organizational Behaviour 2 1-3 60 40-100 3 2.

Bachelor of Technology (Computer Engineering.) Scheme of Courses/Examination. (3 rd SEMESTER) 1 HUT-211 Organizational Behaviour 2 1-3 60 40-100 3 2. Bachelor of Technology (Computer Engineering.) Scheme of s/examination Sl. (3 rd SEMESTER) Teaching Schedule Examination Schedule 1 HUT-211 Organizational Behaviour 2 1-3 60 40-100 3 2.5 2 COT-201 Programming

More information

TABLES TO REFER FOR CHOICE FILLINGS DURING ONLINE APPLICATION SUBMISSION

TABLES TO REFER FOR CHOICE FILLINGS DURING ONLINE APPLICATION SUBMISSION TABLES TO REFER FOR CHOICE FILLINGS DURING ONLINE APPLICATION SUBMISSION TABLE-2 For Admission to First Year Programme (BHMS and BAMS, Pharmacy degree): (01 to 03) Exam. 10 +2 Sc BAMS and BHMS 01 PHARMACY

More information

SERIALS PUBLICATIONS (P) LTD.

SERIALS PUBLICATIONS (P) LTD. J o u r n a l s SERIALS PUBLICATIONS (P) LTD. PUBLISHERS : JOURNALS & BOOKS 4830/24, Ansari Road, Darya Ganj, New Delhi-110 002 Ph.: 011-2324 5225, 2325 9212, E-mail: serials@mail.com National Journals

More information

M.Tech. Software Systems

M.Tech. Software Systems M.Tech. Software Systems Input Requirements Employed professionals holding an Integrated First Degree of BITS or its equivalent in relevant disciplines, with minimum one year work experience in relevant

More information

Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified)

Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) 272 School of Engiineering Contact: The Dean, School of Engineering Moi University P.O. Box 3900 30100, Eldoret, Kenya Tel: (053) 43170;

More information

Subject Module. Department

Subject Module. Department POSTGRADUATE LEURE-TYPE MODULES PER DEPARTMENT CIVIL ENGINEERING 10785 812 15 Advanced Bitumen Technology R 3 777 CIVIL ENGINEERING 10809 711 15 Advanced geotechnics R 3 777 CIVIL ENGINEERING 10809 811

More information

ENGINEERING AT CAMBRIDGE

ENGINEERING AT CAMBRIDGE ENGINEERING AT CAMBRIDGE GEOFF PARKS DIRECTOR OF UNDERGRADUATE ADMISSIONS ENGINEERING Engineers are ingenious people who apply science and technology to the fulfilment of human needs and aspirations Engineers

More information

Engineering Technology Division xxx

Engineering Technology Division xxx 7 xxx The offers a wide range of programs. These programs prepare students to successfully move to challenging and critical positions requiring technical expertise in a modern and evolving world. Students

More information

Publishing in IEEE PES Transactions: IEEE Transactions on Energy Conversion

Publishing in IEEE PES Transactions: IEEE Transactions on Energy Conversion 1 Publishing in IEEE PES Transactions: IEEE Transactions on Energy Conversion Presented Presented at Kyiv Polytechnic Institute (KPI) 1 July, 2014, Kyiv, Ukraine Dr. Juri Jatskevich, Editor In Chief Electrical

More information

COURSE CATALOGUE 2013-2014

COURSE CATALOGUE 2013-2014 COURSE CATALOGUE 201-201 Field: COMPUTER SCIENCE Programme: Bachelor s Degree Programme in Computer Science (Informatics) Length of studies: years (6 semesters) Number of ECTS Credits: 180 +0 for the B.Sc.

More information

Object Oriented Programming Data Comm. & Networks Grid Computing Programming in VB. NET Programming in Java

Object Oriented Programming Data Comm. & Networks Grid Computing Programming in VB. NET Programming in Java PRESTON UNIVERSITY Subject List Graduate and Undergraduate Programs Master of Computer Science (MCS) Specializations Data Structures Introduction to IT Programming Languages Operating Systems Database

More information

EECS PhD Comprehensive Examination Guidelines

EECS PhD Comprehensive Examination Guidelines EECS PhD Comprehensive Examination Guidelines EECS Graduate and Research Committee Graduate students accepted in the EECS doctoral program may take comprehensive exam as early as the last semester of their

More information

ESE 50 ISE 10 ESE - 50 20 - - 4 2 ISE -

ESE 50 ISE 10 ESE - 50 20 - - 4 2 ISE - Second Year B.Tech. Program in Electronics Semester I 1MA 203 201 202 203 204 252 253 Applied Mathematics III Circuits Theory L T P Credits Scheme Theory Marks Practical Marks -- Data Structures and Algorithms

More information

GAUTAM BUDDHA UNIVERSITY

GAUTAM BUDDHA UNIVERSITY GAUTAM BUDDHA UNIVERSITY Gautam Buddh Nagar -201310 SCHOOL OF ENGINEERING REVISED COURSE STRUCTURE (Five Years Integrated Dual Degree Program in Electrical Engineering) 9 th Board of Studies Meeting (August

More information

Seat Matrix for M.Tech [Part-Time & Sponsored] Programmes. Department Programme Qualifying Degree Part Time Sponsored Applied Mechanics Mechanics

Seat Matrix for M.Tech [Part-Time & Sponsored] Programmes. Department Programme Qualifying Degree Part Time Sponsored Applied Mechanics Mechanics Ekksrhyky usg: jk Vªh; izks ksfxdh lalfkku bykgkckn bykgkckn&211004 [Hkkjr] Motilal Nehru National Institute of Technology Allahabad Allahabad-211004 [India] Seat Matrix for M.Tech [Part-Time & Sponsored]

More information

Date : 04.06.2015. 8/6/2015 Monday. Controller of Examinations. Date/ Day. S. No.

Date : 04.06.2015. 8/6/2015 Monday. Controller of Examinations. Date/ Day. S. No. Schedule for COP Examinations of Theory Subjects, 2014-15 Subject Code Subject Name Subject Code Subject Name 1 CEE 323 GEOTECHNICAL ENGINEERING ECE 403 OPTICAL COMMUNICATION & NETWORKS 2 EEE 305 CONTROL

More information

B.E. COMPUTER SCIENCE AND ENGINEERING (PART-TIME)

B.E. COMPUTER SCIENCE AND ENGINEERING (PART-TIME) NA UNIVERSITY, CHENNAI - 600 5 Dated: -DEC-12 TIME TABLE - B.E.(PARTTIME)(R-20) DEGREE EXAMINATIONS -Nov/Dec - 22 for cadidates admitted i erstwhile Aa Uiversity of Techology, Tiruchirappalli i 20,2008,2009

More information

STEM DEGREES (Degree title name has to be exactly as here) Acoustical Engineering Acoustical Engineering & Music Actuarial Science Aeronautical and

STEM DEGREES (Degree title name has to be exactly as here) Acoustical Engineering Acoustical Engineering & Music Actuarial Science Aeronautical and STEM DEGREES (Degree title name has to be exactly as here) Acoustical Engineering Acoustical Engineering & Music Actuarial Science Aeronautical and Astronautical Engineering Aeronautical Engineering Aeronautical

More information

INTERNAL REGULATIONS FOR THE BACHELOR OF SCIENCE DEGREE IN MECHATRONICS AND ROBOTICS ENGINEERING

INTERNAL REGULATIONS FOR THE BACHELOR OF SCIENCE DEGREE IN MECHATRONICS AND ROBOTICS ENGINEERING Czech Technical University in Prague Faculty of Engineering Assiut University INTERNAL REGULATIONS FOR THE BACHELOR OF SCIENCE DEGREE IN MECHATRONICS AND ROBOTICS ENGINEERING Assiut University awards at

More information

The Emerging Trends in Electrical and Computer Engineering

The Emerging Trends in Electrical and Computer Engineering 18-200 Fall 2006 The Emerging Trends in Electrical and Computer Engineering Hosting instructor: Prof. Jimmy Zhu; Time: Thursdays 3:30-4:20pm; Location: DH 2210 Date Lecturer Lecture Contents L01 08/31

More information

Subscription Order Form National Rates (Year -2015)

Subscription Order Form National Rates (Year -2015) Subscription Order Form National Rates (Year -2015) The Publisher, JournalsPub (Subscriptions), st Office No-4, 1 Floor, CSC Market, Pocket-E, Mayur Vihar, Phase-2, New Delhi-110091 India Tel: 0120-4347644

More information

Doctor of Philosophy in Systems Engineering

Doctor of Philosophy in Systems Engineering Doctor of Philosophy in Systems Engineering Coordinator Michael P. Polis Program description The Doctor of Philosophy in systems engineering degree program is designed for students who plan careers in

More information

Faculty of Applied Science and Engineering University of Toronto. Chapter 7. Chapter 5 Chapter 4 Chapter 3 Chapter 2 Chapter 1.

Faculty of Applied Science and Engineering University of Toronto. Chapter 7. Chapter 5 Chapter 4 Chapter 3 Chapter 2 Chapter 1. Chapter 5 Chapter 4 Chapter 3 Chapter 2 Chapter MECHANICAL ENGINEERING (Offered by the Department of Mechanical and Industrial Engineering. For a listing of Academic Staff in the Department, please refer

More information