DuPont Personal Protection. Product Catalog 2013 Version 1

Transcription

1 DuPont Personal Protection Product Catalog 2013 Version 1

2 DuPont Garments: levels of protection to meet your needs CPF 3 BR LV TK Responder CSM Reflector ThermoPro QC SL F Basic Tempro Non-hazardous particles Non-hazardous particles, liquids and aerosols Light Chemical exposure Heavy Non-hazardous particles and aerosols Flame resistance Non-hazardous particles and light liquid splash Non-hazardous particles Hazardous particles Non-hazardous light liquid splash and aerosols Different jobs require different levels of protective clothing. DuPont Personal Protection offers a wide range of protective clothing to address those varying needs. Visit to search by industry or hazard to help you select a garment.

3 Contents 4 Choosing a Garment 6 Product Part Numbers 8 Permeation data for tychem fabrics 10 Product LINE by hazard Garments Tempro ProShield Basic ProShield ProShield NexGen Tyvek Tyvek boot and shoe covers Tyvek Dual QC / QC for Corrections SL F ThermoPro CPF 3 BR / LV TK Responder CSM Reflector / TK ensembles Accessories for garments 35 Sizing 36 DuPont Controlled Environments

4 Choosing a garment Before searching for an appropriate chemical protective garment, a detailed assessment of the nature of the hazard and the working environment is needed. There are different factors like concentration, temperature, pressure and the work environment that should be matched to the garment s fabric, design and seam construction. Fabric No matter what the brand or trade name, almost all limited use protective apparel products can be classified into one of a few general fabric technologies. It is important to understand the performance attributes of the fabric being used for a given application. Why? Not all fabrics used in chemical protective garments are the same. From exclusive DuPont technologies, such as DuPont Tychem and DuPont Tyvek to high-quality SMS and microporous film fabrics, DuPont offers a variety of fabrics with different levels of comfort, durability, breathability and protection to meet your specific needs. In order to select the appropriate protective garment, it is crucial to know how well the fabric used in the garment provides a barrier to specific hazardous materials. Testing for chemical protective fabrics can be divided into two primary categories: 1) penetration testing appropriate for particle hazards and 2) permeation testing appropriate for liquid and gaseous hazards. Penetration occurs when there is bulk movement of a material through a pore, hole, gap or defect in the fabric and is the proper method to evaluate particle barrier. Permeation, on the other hand, occurs when there is movement of the material through the barrier fabric on a molecular level. It is possible for a liquid or vapor to permeate through a fabric even when there is no observed opening in the fabric. Permeation testing is a more sensitive and representative way of characterizing the interaction of liquids and gases with the barrier fabric. Permeation testing is critical for fabrics that are exposed to hazardous liquids, vapors or gases. Fabric Technologies Typically Used in Protective Garments All images are magnified Increase Fabric Performance DuPont Chemical barrier fabrics specifically engineered for protection over a range of hazards. DuPont Tyvek Made only by DuPont, it offers superior protection and durability. Tyvek is 100% high-density polyethylene fibers entangled into a protective material with no fillers or thin films to wear away. Microporous Films (SF or MF) Bi-laminate with a thin microporous film layer on a spunbonded polypropylene nonwoven, these fabrics offer limited durability barrier protection is lost when the film layer is abraded. Exclusive DuPont Technologies Spunbond-Meltblown-Spunbond (SMS) SMS fabrics rely on the meltblown polypropylene layer in the middle of the open tri-laminate polypropylene structure to act as the main filter for particles limited durability and barrier performance, especially liquids. Spunbonded Polypropylene (SBPP) With their highly open structure, SBPP fabrics offer negligible barrier protection. 4 Customer Service

5 Choosing a garment Seam construction Seams are a critical component of the overall barrier protection provided by a chemical protective garment. It is vital to select the appropriate seam configuration for your application needs and to know that the garment will be constructed with strong, tight seams. One loose thread or gap and the barrier between you and your environment unravels leaving you vulnerable. Serged or Sewn* A seam produced when multiple threads are interlocked around the raw edges of two pieces of material for a strong, stress-resistant seam. S B T T Bound* Tightly sewn with a reinforced outer binding to increase seam strength and barrier. For potential misting exposure of non-hazardous liquids or particle penetration through the seam. Taped Both sewn and taped to provide strong chemical resistance against heavy liquid splashes and tough seam stress. A sewn seam is covered with a strip of compatible material by heat-sealing. *Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Double Taped Sewn, then taped on the inside and the outside of the seam for a very strong chemical- and stressresistant seam. Garment style DuPont offers a wide variety of garment styles from hoods and shoe covers to aprons, coveralls and fully encapsulated suits. Fully encapsulated suits are available with front or rear entry, with a flat back for airline accommodation or an expanded back for SCBA accommodation. Faceshields In addition to the standard faceshield, DuPont has several garment styles that offer a greater field of vision, enabling the wearer to see more of what they are dealing with, reducing missteps and allowing more natural movement and better eye contact. Standard Hoods In addition to our standard hood design, many of our garments offer a respirator fit hood. These hoods are designed with a longer zipper for complete coverage of the neck area. Standard Respirator fit The EX (extra-wide) faceshield options on Tychem TK and Tychem BR Level A garments feature a wrap-around design that provides ample room for a mask-mounted regulator. This faceshield is wider and longer, providing expanded peripheral and vertical viewing. EX (extra-wide) Garment Color High visibility can be either a help or a hindrance for emergency responders. For example, in hazardous situations, it is critical that emergency responders can be easily seen. In addition, hazardous material emergencies often do not occur in well-lighted environments thus the need for high visibility is obviously an important feature. The high-visibility colors chosen for DuPont Tychem fabrics were based on extensive visibility research. For example, the human eye is more sensitive to the lime yellow of Tychem TK and the safety yellow colors of Tychem BR and Tychem QC fabrics. On the other hand, there are instances when being visible is as dangerous as the chemical or biological agent that will be encountered. When discretion is preferred or required special low-visibility fabrics, such as Tychem CPF 3 or Tychem LV are less easy to see and blend into a variety of environments. 5 Customer Service

6 Product part numbers Product part number Abbreviations To simplify ordering and inventory management at your facility, we developed a simple, logical and intuitive product part numbering system. Using only 16 characters, each part number is comprised of abbreviations that provide all the information you need. For your convenience, here is a guide to these abbreviations. PART NUMBER GUIDE TY 120 S WH LG Fabric Style Seam Color Size Case count Options The first two characters are the fabric description. Abbreviations DuPont QC QC SL SL TF F TP ThermoPro C3 CPF 3 BR BR LV LV RC Responder CSM RF Reflector TK TK 99 Accessories DuPont Tyvek TY Tyvek TD Tyvek Dual FC Tyvek FC Seam construction Abbreviations S Serged or sewn B Bound T Taped or double taped See page 5 for details. Many DuPont garments are available in a range of sizes; refer to catalog descriptions for details. Abbreviations* SM Small MD Medium LG Large XL Extra large 2X 2 Extra large 3X 3 Extra large 4X 4 Extra large 5X 5 Extra large 6X 6 Extra large 7X 7 Extra large 00 Universal See page 35 for sizing charts. For example, TV designates Trade Agreement Act compliant. PI designates packaged individually. Not all option codes are available for all products; refer to catalog descriptions for details. See page 7 for abbreviations. DuPont ProShield NG ProShield NexGen P1 ProShield P3 ProShield 3 PB ProShield Basic Other TM Tempro DuPont offers a wide array of garment styles from hoods to aprons and coveralls to fully encapsulated suits. Each garment style has a unique three-digit code. Several DuPont fabrics are available in color options. Abbreviations BU Blue DB Denim blue GY Gray LY Lime yellow OD Olive drab OR Orange SV Silver TN Tan WH White YL Yellow Provides the number of garments per case. *Not all sizes available in all styles. Stock Items versus Make to Order For the General Protection line of garments (Tyvek, ProShield Basic, ProShield, ProShield NexGen and Tempro ), sizes Medium to 4X are identified as stock items. Sizes Small and 5X and above are identified as Make to Order. Certain accessory items are also identified as Make to Order. Most garments in the Chemical/HazMat line ( QC, SL, F, BR, Responder CSM and TK) are identified as Make to Order. A small grouping is identified as stock items, following the same size guidelines as indicated above. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 6 Customer Service

7 Product part numbers Option code abbreviations 00 Standard offering 0B Bulk pack 2K Double storm flap w/zipper & hook-and-loop closing 5C Viton (Showa Best ) outer glove 74 Best Hustler PVC glove 7C MSA connector pass-thru CAMDS (#491335) right side 7M MSA dual purpose w/foster fitting N MSA quick fill w/schrader fitting R MSA dual purpose # Hansen fitting (left front waist) 7S Scott pass-thru # Hansen fitting (right side) 8B twist lock glove ring assembly BN Berry Amendment compliant JF CPE sleeve cuff and jam fit glove insert LG 8.25 high shoe cover NF NAFTA sourced NS Non-skid material PI Packaged individually SR Skid resistant TM Same number of technical manuals as the case count TV Trade Agreement Act compliant WG With gloves YU 22 long, tapered pattern 7 Customer Service

8 Permeation data Mid level 21 Industrial Chemicals ASTM F1001 Cas # Physical Phase QC* 8 Customer Service SL* F ThermoPro CPF 3 Acetone L imm. imm. >480 >480 >480 Acetonitrile L imm >480 imm. Ammonia G imm > , 3-Butadiene G imm. >480 >480 >480 >480 Carbon disulfide L imm. imm. >480 > Chlorine G imm. >480 >480 >480 >480 Dichloromethane L imm. imm. imm. imm. imm. Diethylamine L imm. 12 >480 >480 >480 N, N-Dimethylformamide L imm. 78 >480 >480 >480 Ethyl acetate L imm. imm. >480 >480 >480 Ethylene oxide G imm. imm. >480 >480 >480 n-hexane L imm. imm. >480 >480 >480 Hydrogen chloride G imm. >480 >480 >480 >480 Methanol L imm. > >480 imm. Methyl chloride G imm. >480 >480 >480 >480 Nitrobenzene L imm. 102 >480 >480 >480 Sodium hydroxide, 50% L >480 >480 >480 >480 >480 Sulfuric acid, 98% L >480 >480 >480 >480 >480 1, 1, 2, 2-Tetrachloroethylene L imm. imm. >480 >480 >480 Tetrahydrofuran L imm. imm. 464 >480 >480 Toluene L imm. imm. >480 >480 >480 Chemical Warfare Agents** Lewisite (L) L nt > Mustard (HD) L nt >720 2 > Tabun (GA) L nt nt >720 4 >720 4 nt Sarin (GB) L nt >60 3 >720 4 > Soman (GD) L nt nt >720 4 >720 4 >480 3 VX Nerve Agent L nt >480 3 >720 4 >720 4 >480 3 Index of codes: >=greater than, imm. =immediate (<10 minutes), nt=not tested, L=liquid, G=gas Normalized Breakthrough Time (NBT) shown in minutes. *Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. **Actual Breakthrough Time in minutes. Permeation testing on industrial chemicals is in accordance with ASTM F739, Standard Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Continuous Contact. All tests are conducted at room temperature unless otherwise noted. Reported results are Normalized Breakthrough Times defined by ASTM F739 as the time (in minutes) when the permeation rate reaches 0.1 µg/cm 2 /min. The product information contained is current as of the date of publication, but may be revised as new information is developed. Before relying on any performance data for the purchase or performance of products, you should check or contact DPP Customer Service at to determine whether there is new information that relates to your intended use or application of the product. NOTE: Numbers reported are averages of samples tested. Sample results vary. All DuPont testing is performed by a third party. **Chemical warfare agents are tested according to the following protocols: 1 Protocol DN3-MIL-STD-282, Method T-209 (HD) or modified for Lewisite, for 12 hours at 10 g/m 2. 2 Protocol DN4-MIL-STD-282, Method T-209 (HD) or modified for Lewisite, for 12 hours at 100 g/m 2 (total coverage). 3 Protocol DN5-MIL-STD-282, Method T-208 (GB) or modified for GA, GD and VX, for 12 hours at 10 g/m 2. 4 Protocol DN6-MIL-STD-282, Method T-208 (GB) or modified for GA, GD and VX, for 12 hours at 100 g/m 2 (total coverage). All tests are performed at 22 C and 50% R.H. Actual Breakthrough Times, in minutes, are reported.

9 Permeation data High level 21 Industrial Chemicals ASTM F1001 Cas # Physical Phase BR/LV 9 Customer Service TK Responder CSM Reflector Acetone L >480 >480 >480 >480 Acetonitrile L >480 >480 >480 >480 Ammonia G 46 > >480 1, 3-Butadiene G >480 >480 >480 >480 Carbon disulfide L >480 >480 >480 >480 Chlorine G >480 >480 >480 >480 Dichloromethane L 432 > >480 Diethylamine L >480 >480 >480 >480 N, N-Dimethylformamide L >480 >480 >480 >480 Ethyl acetate L >480 >480 >480 >480 Ethylene oxide G >480 >480 >480 >480 n-hexane L >480 >480 >480 >480 Hydrogen chloride G >480 >480 >480 >480 Methanol L 157 >480 >480 >480 Methyl chloride G >480 >480 >480 >480 Nitrobenzene L >480 >480 >480 >480 Sodium hydroxide, 50% L >480 >480 >480 >480 Sulfuric acid, 98% L >480 >480 >480 >480 1, 1, 2, 2-Tetrachloroethylene L >480 >480 >480 >480 Tetrahydrofuran L >480 >480 >480 >480 Toluene L >480 >480 >480 >480 Chemical Warfare Agents** Lewisite (L) L >720 1 >720 2 >720 1 >720 1 Mustard (HD) L >720 2 >720 2 >720 2 >720 2 Tabun (GA) L >720 3 >720 4 >720 3 >720 3 Sarin (GB) L >720 4 >720 4 >720 4 >720 4 Soman (GD) L >720 3 >720 4 >720 3 >720 3 VX Nerve Agent L >720 4 >720 4 >720 4 >720 4 Index of codes: >=greater than, imm. =immediate (<10 minutes), nt=not tested, L=liquid, G=gas Normalized Breakthrough Time (NBT) shown in minutes. *Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. **Actual Breakthrough Time in minutes. Permeation testing on industrial chemicals is in accordance with ASTM F739, Standard Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Continuous Contact. All tests are conducted at room temperature unless otherwise noted. Reported results are Normalized Breakthrough Times defined by ASTM F739 as the time (in minutes) when the permeation rate reaches 0.1 µg/cm 2 /min. The product information contained is current as of the date of publication, but may be revised as new information is developed. Before relying on any performance data for the purchase or performance of products, you should check or contact DPP Customer Service at to determine whether there is new information that relates to your intended use or application of the product. NOTE: Numbers reported are averages of samples tested. Sample results vary. All DuPont testing is performed by a third party. **Chemical warfare agents are tested according to the following protocols: 1 Protocol DN3-MIL-STD-282, Method T-209 (HD) or modified for Lewisite, for 12 hours at 10 g/m 2. 2 Protocol DN4-MIL-STD-282, Method T-209 (HD) or modified for Lewisite, for 12 hours at 100 g/m 2 (total coverage). 3 Protocol DN5-MIL-STD-282, Method T-208 (GB) or modified for GA, GD and VX, for 12 hours at 10 g/m 2. 4 Protocol DN6-MIL-STD-282, Method T-208 (GB) or modified for GA, GD and VX, for 12 hours at 100 g/m 2 (total coverage). All tests are performed at 22 C and 50% R.H. Actual Breakthrough Times, in minutes, are reported.

10 Product line by hazard When it comes to addressing a broad range of hazards in the workplace, specifiers have many product options from which to select. The process to understand which option matches a given situation can be confusing and taxing. DuPont Personal Protection has tried to reduce some of that burden by providing a complete line of products with supporting information to help guide specifiers through the selection process. Our database includes hundreds of chemicals, including warfare agents and the ASTM F1001 standard list of challenge chemicals. This tool can be accessed on our website at To provide a quicker overview of our products and where they are ideally suited for use, we developed the simple guide below. Our goal was to match the level of protection and value for a given exposure hazard. To get the most out of your Personal Protective Equipment (PPE), it is necessary to understand where the products are intended to be used. DuPont SafeSPEC 2.0 is a sophisticated, easy-to-use interactive tool that provides suggestions for chemical protective clothing based on the user s hazard scenario. DuPont Tyvek and General Protection Products Typical general industrial hazards/description/examples Garment Non-hazardous Hazardous Particles Aerosol Light liquid splash* Particles Aerosol General Animal dirt waste & grime Sanding & grinding waste Spray paints Oil & Lubricants Fertilizer Sewage Fertilizer Pesticides Asbestos Lead Chromium Berylium Mold Fiberglass Carbon Radioactive Isocyanate grease particles Flame** resistance Tyvek ProShield NexGen ProShield ProShield Basic Tempro Generally preferred Acceptable for use *Liquid barrier performance varies based on the amount of liquid on the garment, the length of time the liquid is on the garment, applied pressures and certain physical properties of the liquid. In applications where a higher liquid barrier is needed, consider DuPont protective garments. **Tempro garments are flame retardant treated, not inherently flame resistant, and are intended to be worn OVER primary flame-resistant protective apparel such as Nomex IIIA. It is the user s responsibility to determine the nature and level of hazard and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics, not complete garments, under controlled conditions. It is intended for information use by persons having technical skill for evaluation under their specific end-use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended use. In many cases, seams and closures have shorter breakthrough times and higher penetration rates than the fabric. Please contact DuPont for specific data. If the garment becomes torn, abraded or punctured, end user should discontinue use of garment to avoid potential exposure. WARNINGS: 1) Tyvek, ProShield NexGen, ProShield and ProShield Basic garments are not flame-resistant and should not be used around heat, flame, sparks or in potentially flammable or explosive environments. 2) Garments made of Tyvek, ProShield NexGen, ProShield, ProShield Basic and Tempro should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers or other garment surfaces in conditions where slipping may occur. 3) should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only ThermoPro, Reflector and TK styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of ThermoPro, Reflector and TK styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the user manual, located on our website, for instructions on proper use, care and maintenance of your garments. 4) Some garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. 5) DuPont Tyvek coveralls can be considered for use with the appropriate respirators and other suitable PPE to minimize contact with isocyanate paint aerosols. Tyvek garments are not appropriate if they are getting wet (paint is dripping or running, or wet to the touch) or if spotting is observed on skin or garments worn under the coveralls. aprons and smocks are available for situations where prolonged liquid exposure may be limited to the front of the torso and/or arms of the wearer. These aprons and smocks can be worn with Tyvek to provide localized protection while limiting the level of thermal discomfort. 10 Customer Service

11 Product line by hazard DuPont Chemical Protection Products Typical chemical hazards/examples Garment Brands Exposure Hazardous dry powders & solids Dry pharma chemicals Bloodborne pathogens & biohazards Blood, saliva, human excrement Light chemical splash & aerosols Inorganic acids and bases, salts Moderate liquid chemical splash Organics, solvents Potential flash fire exposure & liquid organic chemicals Methamphetamine Heavy liquid chemical splash (toxics & corrosives) Known carcinogens ChemBio & warfare agents Sarin, Mustard, VX nerve agent Chemical vapors & gases (toxics & corrosives) Chlorine, anhydrous ammonia 1991 Flash fire option NFPA Ensembles 1991 Liq. gas option Class E Cat 2 QC * SL * F ThermoPro CPF 3 LV BR Responder CSM TK ** Reflector ** Generally preferred Acceptable for use *Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. ** Reflector RF600T and TK600T and TK601T have NFPA 1991 flash fire option. 11 Customer Service

12 Reflector DuPont Tempro Secondary flame-resistant protection 1 TM 120 S BU xx SM-6X 1 TM 127 S BU xx Attached hood SM-6X TM 127 S 1 TM 122 S BU xx Attached hood Attached sock boots 2 SM-7X Tempro Lightweight, disposable overgarment designed to help protect and preserve primary flame-resistant garments Provides a barrier against non-hazardous particles and aerosols while not contributing to burn injury Won t ignite and continue to burn when exposed to a flame source Tempro is blue Level of protection Tempro Basic QC SL ThermoPro F CPF 3 BR LV TK Responder CSM Tempro garments are flame retardant treated, not inherently flame resistant, and are intended to be worn over your primary flame-resistant garments. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. 1 Styles do not have storm flaps. 2 These Tempro garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. Note: Not all sizes available in all styles. 12 Customer Service

13 Responder Reflector DuPont ProShield Basic PB 120 S BU xx PB 120 S WH xx Storm flap MD-5X PB 125 S BU xx PB 125 S WH xx Storm flap MD-5X PB 125 S Proshield Basic Comfort and quality at an affordable price Soft, breathable and lightweight garments using our unique comfort fit design Spunbond-meltblown-spunbond (SMS) garments made to high quality standards Uses include general maintenance, janitorial/cleaning and other dirty work assignments ProShield Basic is available in blue or white PB 127 S BU xx PB 127 S WH xx Attached hood Storm flap MD-5X PB 122 S BU xx PB 122 S WH xx Attached hood Storm flap Attached skid-resistant boots MD-5X Level of protection BR TK Tempro Basic QC SL ThermoPro F CPF 3 LV CSM Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. WARNING: ProShield Basic should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of ProShield Basic fabric should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur. Note: Not all sizes available in all styles. 13 Customer Service

14 DuPont ProShield P1 120 S DB xx P1 120 S WH xx Elastic waist Available in blue or white SM-7X P1 125 S DB xx P1 125 S WH xx Elastic waist Available in blue or white SM-7X P1 120 S P1 127 S DB xx P1 127 S WH xx Attached hood (respirator fit) 1 Elastic waist Available in blue or white SM-7X Labcoat P1 212 S DB xx Front snap closure Two pockets Available in blue only SM-7X ProShield Optimized for comfort with soft fabric and excellent breathability Roomy garments using our unique comfort fit design Uses include general maintenance and hospital visitation ProShield is available in white or denim blue, except where noted Frock P1 271 S DB xx P1 271 S WH xx Mandarin collar MD-4X Shoe cover P3 450 S GY xx Elastic opening 5 height ProShield 3 fabric Skid-resistant PROSHIELD 3 Skid-resistant material for shoe/boot covers to help prevent slipping Provides non-hazardous liquid splash protection ProShield 3 is gray Shoe cover P3 450 S GY xx 0200 LG Elastic opening 8.25 height ProShield 3 fabric Skid-resistant Boot cover P3 454 S GY xx Elastic opening 18 height ProShield 3 fabric Skid-resistant Level of protection Tempro Basic QC SL ThermoPro F CPF 3 BR LV TK Responder CSM Reflector Boot cover P3 452 S GY xx Elastic opening 10 height ProShield 3 fabric Skid-resistant 1 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Bound and sewn seams and closures have less barrier than fabric. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Note: Not all sizes available in all styles. WARNING: ProShield should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of ProShield fabric should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur. 14 Customer Service

15 DuPont ProShield NexGen NG 120 S WH xx SM-6X NG 125 S WH xx SM-5X NG 127 S NG 127 S WH xx 0025 NP Attached hood (respirator fit) 1 Storm flap SM-7X NG 122 S WH xx Attached hood Attached skid-resistant boots SM-6X ProShield NexGen Barrier against a variety of non-hazardous aerosols, liquids and dry particles Microporous film laminated to a nonwoven fabric Uses include automotive refinishing, waste cleanup and sanitation engineering ProShield NexGen is white Apron NG 273 B WH xx Bound seams Bound neck and ties Bib style 28 x 36 Sleeve NG 500 S WH xx Elastic top Elastic wrist 18 length Labcoat NG 212 S WH xx Front snap closure Two pockets Shoe cover NG 451 S WH xx Elastic opening 5 height ProShield NexGen fabric shaft PVC sole SM-XL Level of protection Tempro Basic QC SL ThermoPro F CPF 3 BR LV TK Responder CSM Reflector Boot cover NG 456 S WH xx Elastic opening Elastic ankle 18 height ProShield NexGen fabric shaft PVC sole SM XL 1 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Bound and sewn seams and closures have less barrier than fabric. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Note: Not all sizes available in all styles. WARNING: ProShield NexGen should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of ProShield NexGen fabric should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur. 15 Customer Service

16 DuPont Tyvek TY 120 S WH xx SM-7X TY 120 S WH xx 0025 PI SM-7X TY 120 S WH xx 0025 NF MD-7X TY 120 S WH xx 0025 TV MD-7X TAA Elastic waist Comfort fit design TY 121 S WH xx 0025 NS Attached skid-resistant boots MD-7X TY 120 S TY 122 S WH xx SM-7X TY 122 S WH xx 0025 NF MD-7X TY 122 S WH xx 0025 PI SM-7X Attached hood (respirator fit) 1 Elastic waist Attached skid-resistant boots Comfort fit design TY 125 S WH xx TY 125 S WH xx 0025 PI Elastic waist Comfort fit design MD-7X Tyvek An ideal balance of protection, durability and comfort Comfort fit design allows for a greater range of motion and fewer blowouts Breathable inherent barrier protection against hazardous dry particles, aerosols and non-hazardous light liquid splash Excellent abrasion resistance; protects against small-sized hazardous particles When used with masks and gloves, can help reduce the risk of cross-contamination in pandemic response activities One garment for many applications: - General maintenance/operations - Microcrystalline silica - Lead abatement - Environmental cleanup - Agriculture - Asbestos abatement - Food processing - Mold remediation - Spray painting - Crime scene investigation Tyvek is white PI = Packaged individually TV = TAA compliant TAA TY 127 S WH xx MD-7X TY 127 S WH xx 0025 PI MD-4X TY 127 S WH xx 0025 NF MD-7X TY 127 S WH xx 0025 TV MD-7X TAA Attached hood (respirator fit) 1 Elastic waist Comfort fit design Level of protection Tempro Basic QC SL ThermoPro F CPF 3 BR LV Reflector TK Responder CSM TY 152 S WH xx Two pockets Elastic waist MD-7X 16 Customer Service

17 DuPont Tyvek TY 127 S Frock TY 210 S WH xx TY 210 S WH xx 0030 PI Front snap closure SM-7X Frock TY 211 S WH xx Front snap closure Knee length SM-7X Frock TY 216 S WH xx Mandarin collar Front snap closure SM-5X Labcoat TY 212 S WH xx TY 212 S WH xx 0030 PI TY 212 S WH xx 0030 NF Front snap closure Two pockets SM-7X Shirt TY 303 S WH xx SM-7X TY 303 S WH xx 0050 PI SM-3X Front snap closure Long sleeve SM-7X Pants TY 350 S WH xx SM-7X TY 350 S WH xx 0050 PI SM-3X Elastic waist Apron TY 273 B WH xx TY 273 B WH xx 0100 PI Bound seams Bound neck & ties Bib style 28 x 36 Sleeve TY 500 S WH xx TY 500 S WH xx 0200 NF Elastic top Elastic wrist 18 length Hood TY 657 S WH xx Pullover Elastic face Shoulder length Only TV option codes are TAA compliant. 1 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Bound and sewn seams and closures have less barrier than fabric. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Tyvek with Friction Coating (FC) has been specially treated to promote ink/coating adhesion. This treatment lowers the typical bulk liquid holdout values for Tyvek fabric. Products with this treatment offer limited bulk liquid holdout. If barrier protection from liquid splash is required, please consider a non-treated Tyvek style or other substrate. Note: Not all sizes available in all styles. WARNING: Tyvek should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of Tyvek fabrics should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur. Certain accessory items are also identified as Make to Order. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 17 Customer Service

18 DuPont Tyvek Shoe cover TY 450 S WH xx height TY 450 S WH xx 0200 LG 8.25 height Tyvek fabric Elastic opening Boot cover TY 452 S WH xx Tyvek fabric Elastic opening 10 height Boot cover TY 454 S WH xx Tyvek fabric Elastic opening 18 height Boot cover TY 454 S WH xx 0100 SR Tyvek fabric Tyvek FC sole Elastic opening Elastic ankle 18 height Skid-resistant LG-XL FC 454 S TYVEK FC Skid-resistant materials for shoe/ boot covers to prevent slipping Tyvek with Friction Coating Tyvek FC is gray Shoe cover Tyvek FC FC 450 S GY xx FC 450 S GY xx 0200 NF Tyvek FC fabric Elastic opening Elastic toe, sole and heel seam 5 height Skid-resistant Boot cover Tyvek FC FC 454 S GY xx Tyvek FC fabric Elastic opening 18 height Skid-resistant Level of protection Tempro Basic QC SL ThermoPro F CPF 3 BR LV TK Responder CSM Reflector Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Tyvek with Friction Coating (FC) has been specially treated to promote ink/coating adhesion. This treatment lowers the typical bulk liquid holdout values for Tyvek fabric. Products with this treatment offer limited bulk liquid holdout. If barrier protection from liquid splash is required, please consider a non-treated Tyvek style or other substrate. WARNING: Tyvek should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of Tyvek fabrics should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur. Certain accessory items are also identified as Make to Order. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 18 Customer Service

19 DuPont Tyvek dual TD 125 S WB xx Storm flap Thumb loops Elastic waist Tyvek front TD 127 S ProShield back TD 127 S WB xx Attached hood (respirator fit) 1 Storm flap Thumb loops Elastic waist Tyvek dual Tyvek Dual garments provide an ideal balance of comfort, durability and protection for workers Comfort fit design helps enable a greater range of movement while stretching and bending Designed for very specific applications where demanding comfort requirements are combined with limited protective requirements for frontal exposures Well suited for workers who are involved in a variety of strenuous activities that can lead to heat stress in applications that include: - Wind turbines - Composites manufacturing - Boat manufacturing - Remediation - Utilities - Maintenance - Glass manufacturing Level of protection CPF 3 BR Reflector TK Responder CSM LV ThermoPro DuPont Tyvek fabric on the front Tyvek fabric is composed of flashspun high-density polyethylene, which creates a unique nonwoven material available only from DuPont Tyvek fabric provides an ideal balance of protection, durability and comfort compared to any limiteduse fabric technology Tyvek fabric s durability delivers a consistently better barrier, even after wear and abrasion Tyvek is white DuPont ProShield fabric on the back ProShield fabric has been optimized for comfort, softness and breathability ProShield fabric is designed for non-hazardous dry particle and light liquid splash applications ProShield is made from a polypropylene spunbond-meltblownspunbond (SMS) fabric ProShield is denim blue 1 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Note: Not all sizes available in all styles. WARNING: Tyvek and ProShield should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of Tyvek and ProShield fabrics should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur. Certain accessory items are also identified as Make to Order. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 19 Customer Service Tempro Basic QC SL F

20 DuPont QC QC 120 S YL xx QC 120 S YL xx 0012 PI SM-7X QC 122 S YL QC 122 S GY QC 120 B YL xx Bound seams Storm flap with tape closure MD-6X QC Light liquid splash protection Used extensively in the petroleum; pulp and paper; food and chemical processing; and pharmaceutical industries Tychem QC is polyethylene-coated Tyvek fabric Flexible, durable and lightweight Tychem QC provides at least 30 minutes of protection against >40 chemical challenges When used with masks and gloves, can help reduce the risk of cross-contamination in pandemic preparedness activities Tychem QC is yellow for high visibility PI = Packaged individually BN = Berry compliant BERRY QC for corrections Fits the unique safety requirements for inmate extractions in corrections facilities Sized to be worn over protective equipment used by corrections officers Provides excellent barrier against biohazards such as blood, body fluid and viral contaminants Tychem QC 122 T/125 T/127 T pass ASTM F1671 standard testing for viral penetration by potentially infectious blood and body fluids Gray color provides contrast against high-visibility prisoner uniforms Tychem QC for Corrections provides at least 30 minutes of protection against >40 chemical challenges PI = Packaged individually QC 125 S YL xx QC 125 S YL xx 0012 PI MD-7X QC 125 B YL xx Bound seams, SM-6X QC 125 T YL xx , SM-7X QC 125 T GY xx , SM-7X Storm flap with tape closure Level of protection QC SL ThermoPro F CPF 3 BR LV Reflector TK Responder CSM QC 122 S YL xx SM-7X QC 122 S GY xx 0012 PI MD-4X Attached hood Basic Tempro 20 Customer Service

21 DuPont QC QC 120 S QC 122 B YL xx Bound seams, MD-6X QC 122 B YL xx 0012 BN Bound seams, MD-6X QC 122 T YL xx , SM-6X Attached hood Storm flap with tape closure BERRY QC 127 S YL xx Attached hood SM-7X QC 127 B YL xx Bound seams, SM-7X QC 127 T YL xx , SM-7X QC 127 B GY xx Bound seams, MD-4X QC 127 T GY xx , SM-7X Attached hood Storm flap Frock QC 210 S YL xx Front snap closure SM-5X Apron QC 273 B YL xx QC 273 B YL xx Bound neck & ties Bib style 36 long Apron QC 275 B YL xx Bound seams Raw edge neck with snaps Attached long sleeves Waist ties 44 long Apron QC 278 B YL xx Bound seams Attached long sleeves Bound yoke neck without snaps Waist ties 52 long Shirt QC 303 S YL xx Front snap closure Long sleeve MD-4X Sleeve QC 500 B YL xx Bound seam Elastic top Elastic wrist 18 length Pants QC 350 S YL xx Elastic waist MD-4X Only BN option codes are Berry compliant. Please note that fabrics have different permeation performance. Please check SafeSPEC 2.0 on our website for permeation data that meets your specific needs. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 1 These garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. Storm flaps: All standard bound and taped seam coveralls have a single storm flap with a pressure-sensitive tape closure. Serged seam coveralls do not have a storm flap. Seams and closures have less barrier than fabric. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Note: Not all sizes available in all styles. WARNING: should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only ThermoPro, Reflector and TK styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of ThermoPro, Reflector and TK styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the user manual, located on our website, for instructions on proper use, care and maintenance of your garments. 21 Customer Service

22 Responder Reflector DuPont SL SL 120 B WH xx Bound seams, SM-6X SL 120 T WH xx , MD-4X Storm flap with tape closure SL 125 B WH xx Bound seams, SM-6X SL 125 B WH xx 0012 PI Bound seams, SL 125 T WH xx , SM-5X Storm flap with tape closure SL 122 T SL 121 B WH xx Bound seams, SM-6X SL 121 T WH xx , MD-5X Storm flap with tape closure SL 122 B WH xx Bound seams, MD-7X SL 122 T WH xx , MD-6X Attached hood Storm flap with tape closure SL Effective protection against a range of chemicals Uses include waste management, hazardous response and nuclear environments Tychem SL is Saranex 23-P film laminated to Tyvek fabric Rugged and durable Tychem SL is white for high visibility Tychem SL provides at least 30 minutes of protection against >120 chemical challenges When used with masks and gloves, can help reduce the risk of cross-contamination in pandemic preparedness activities PI = Packaged individually BN = Berry compliant BERRY SL 120 T SL 122 B WH xx 0012 BN Bound seams SL 122 T WH xx 0006 BN Attached hood Storm flap with tape closure SM-7X BERRY Level of protection BR TK CPF 3 LV CSM ThermoPro SL F QC Basic Tempro 22 Customer Service

23 DuPont SL SL 127 B SL 127 B WH xx Bound seams SL 127 T WH xx Attached hood Storm flap with tape closure SM-7X SL 128 T WH xx Attached hood (respirator fit) 2 Storm flap with tape closure Outer boot flaps with elastic SM-5X Apron SL 274 B WH xx Bound neck & ties Bib style 36 long Apron SL 275 T WH xx Raw edge neck with snaps Attached long sleeves Waist ties 44 long Apron SL 278 B WH xx Bound seams Bound yoke neck without snaps Attached long sleeves Waist ties 52 long Sleeve SL 500 B WH xx length SL 500 B WH xx 0200 YU 22 length Bound seam Elastic top Elastic wrist Only BN option codes are Berry compliant. Please note that fabrics have different permeation performance. Please check SafeSPEC 2.0 on our website for permeation data that meets your specific needs. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 1 These garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. 2 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Storm flaps: All standard bound and taped seam coveralls have a single storm flap with a pressure-sensitive tape closure. Seams and closures have less barrier than fabric. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Note: Not all sizes available in all styles. WARNING: should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only ThermoPro, Reflector and TK styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of ThermoPro, Reflector and TK styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the user manual, located on our website, for instructions on proper use, care and maintenance of your garments. 23 Customer Service

24 DuPont F TF 145 T GY xx 0006 TV TF 145 T GY xx Attached hood (respirator fit) 2 Storm flap with tape closure SM-5X TAA TF 169 T GY xx 0006 TV TF 169 T GY xx Attached hood (respirator fit) 2 Storm flap with tape closure SM-5X TAA TF 145 T F Widely used by military personnel and first responders for chemical warfare situations Strong and durable garments with broad chemical barrier For use when potential exposure to industrial chemicals and chemical warfare agents exists Successfully tested by Soldier and Biological Chemical Command (SBCCOM) in Aberdeen, MD Tychem F is a barrier film laminated to Tyvek Tychem F provides at least 30 minutes of protection against >180 chemical challenges Tychem F is gray for discretionary purposes TV = TAA compliant TAA Level of protection Tempro Basic QC SL ThermoPro F CPF 3 BR LV TK Responder CSM Reflector TF 169 T Only TV option codes are TAA compliant. Please note that fabrics have different permeation performance. Please check SafeSPEC 2.0 on our website for permeation data that meets your specific needs. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 1 These garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. 2 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Storm flaps: All taped seam coveralls have a single storm flap with a pressure-sensitive tape closure. Seams and closures have less barrier than fabric. Note: Not all sizes available in all styles. WARNING: should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only ThermoPro, Reflector and TK styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of ThermoPro, Reflector and TK styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the user manual, located on our website, for instructions on proper use, care and maintenance of your garments. 24 Customer Service