SAFETY DATA SHEET. Hazardous to the aquatic environment, acute hazard Not classified

Transcription

1 SAFETY DATA SHEET 1. Identification Product identifier Other means of identification SDS number 1601E Synonyms Part Numbers: 22027, 23000, 23001, 23002, 29030, 29024, 29025, 53061, 53180, 53062, 53188, 53064, 53195, 50683, 50684, 50691, 50962, 53013, Recommended use Joining Copper Pipes. Recommended restrictions None known. Manufacturer/Importer/Supplier/Distributor information Company Name Oatey Co. Address 4700 West 160th St. Cleveland, OH Telephone Transport Emergency Chemtrec (Outside the US ) Emergency First Aid Contact person MSDS Coordinator 2. Hazard(s) identification Physical hazards Health hazards Environmental hazards OSHA defined hazards Label elements Not classified. Not classified. Hazardous to the aquatic environment, acute hazard Not classified. Category 1 Signal word Hazard statement Precautionary statement Prevention Response Storage Disposal Hazard(s) not otherwise classified (HNOC) Warning Very toxic to aquatic life. Avoid release to the environment. Collect spillage. Store away from incompatible materials. Dispose of contents/container in accordance with local/regional/national/international regulations. Heating above the melting point releases metallic oxides which may cause metal fume fever by inhalation. The symptoms are shivering, fever, malaise and muscular pain. 3. Composition/information on ingredients Mixtures Chemical name Tin Bismuth Copper Silver CAS number % Version #: 02 Revision date: 10-December-2014 Issue date: 30-July / 6

2 *Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret. 4. First-aid measures Inhalation Skin contact Eye contact Ingestion Most important symptoms/effects, acute and delayed Indication of immediate medical attention and special treatment needed General information 5. Fire-fighting measures Suitable extinguishing media Unsuitable extinguishing media Specific hazards arising from the chemical Special protective equipment and precautions for firefighters Fire fighting equipment/instructions Specific methods General fire hazards Move to fresh air. Call a physician if symptoms develop or persist. Wash off with soap and water. Get medical attention if irritation develops and persists. Rinse with water. Get medical attention if irritation develops and persists. Rinse mouth. Get medical attention if symptoms occur. Direct contact with eyes may cause temporary irritation. Provide general supportive measures and treat symptomatically. Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. Water fog. Foam. Dry chemical powder. Dry sand. Carbon dioxide (CO2). Do not use water jet as an extinguisher, as this will spread the fire. During fire, gases hazardous to health may be formed. Self-contained breathing apparatus and full protective clothing must be worn in case of fire. Use water spray to cool unopened containers. Use standard firefighting procedures and consider the hazards of other involved materials. No unusual fire or explosion hazards noted. 6. Accidental release measures Personal precautions, protective equipment and emergency procedures Methods and materials for containment and cleaning up Environmental precautions Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Keep out of low areas. Wear appropriate personal protective equipment. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be contained. For personal protection, see section 8 of the SDS. Stop the flow of material, if this is without risk. Collect spillage. Prevent entry into waterways, sewer, basements or confined areas. Following product recovery, flush area with water. For waste disposal, see section 13 of the SDS. Avoid release to the environment. Contact local authorities in case of spillage to drain/aquatic environment. Prevent further leakage or spillage if safe to do so. Do not contaminate water. Avoid discharge into drains, water courses or onto the ground. 7. Handling and storage Precautions for safe handling Conditions for safe storage, including any incompatibilities Avoid prolonged exposure. Avoid breathing dust/fume/gas/mist/vapors/spray. Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Avoid release to the environment. Do not empty into drains. Store in original tightly closed container. Store away from incompatible materials (see Section 10 of the SDS). 8. Exposure controls/personal protection Occupational exposure limits US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR ) Components Type Value PEL 1 mg/m3 Dust and mist. 0.1 mg/m3 Fume. PEL 0.01 mg/m3 PEL 2 mg/m Version #: 02 Revision date: 10-December-2014 Issue date: 30-July / 6

3 US. ACGIH Threshold Limit Values Components Type TWA 0.1 mg/m3 Dust and fume. TWA 2 mg/m3 US. NIOSH: Pocket Guide to Chemical Hazards Components Biological limit values Appropriate engineering controls Type Value Value TWA 1 mg/m3 Dust and mist. TWA 0.01 mg/m3 Dust. TWA 2 mg/m3 No biological exposure limits noted for the ingredient(s). Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level. Individual protection measures, such as personal protective equipment Eye/face protection Wear safety glasses with side shields (or goggles). Skin protection Hand protection Wear protective gloves. Other Wear appropriate chemical resistant clothing. Respiratory protection In case of insufficient ventilation, wear suitable respiratory equipment. Thermal hazards Wear appropriate thermal protective clothing, when necessary. General hygiene considerations 9. Physical and chemical properties Appearance Solid wire. Physical state Solid. Solid. Color Silver. Odor Odor threshold ph Melting point/freezing point F ( C) Initial boiling point and boiling range Flash point Evaporation rate Flammability (solid, gas) Upper/lower flammability or explosive limits Flammability limit - lower (%) Flammability limit - upper (%) Explosive limit - lower (%) Explosive limit - upper (%) Vapor pressure Vapor density Relative density 9-11 Solubility(ies) Solubility (water) Partition coefficient (n-octanol/water) Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants Version #: 02 Revision date: 10-December-2014 Issue date: 30-July / 6

4 Auto-ignition temperature Decomposition temperature Viscosity 10. Stability and reactivity Reactivity Chemical stability Possibility of hazardous reactions Conditions to avoid Incompatible materials Hazardous decomposition products The product is stable and non-reactive under normal conditions of use, storage and transport. Material is stable under normal conditions. No dangerous reaction known under conditions of normal use. Contact with incompatible materials. Acids. Chlorine. No hazardous decomposition products are known. 11. Toxicological information Information on likely routes of exposure Inhalation Prolonged inhalation may be harmful. Skin contact No adverse effects due to skin contact are expected. Eye contact Direct contact with eyes may cause temporary irritation. Ingestion Expected to be a low ingestion hazard. Symptoms related to the Direct contact with eyes may cause temporary irritation. physical, chemical and toxicological characteristics Information on toxicological effects Acute toxicity Skin corrosion/irritation Prolonged skin contact may cause temporary irritation. Serious eye damage/eye Direct contact with eyes may cause temporary irritation. irritation Respiratory or skin sensitization Respiratory sensitization Skin sensitization This product is not expected to cause skin sensitization. Germ cell mutagenicity No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic. Carcinogenicity This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA. OSHA Specifically Regulated Substances (29 CFR ) Not listed. Reproductive toxicity This product is not expected to cause reproductive or developmental effects. Specific target organ toxicity - Not classified. single exposure Specific target organ toxicity - Not classified. repeated exposure Aspiration hazard Chronic effects Prolonged inhalation may be harmful. 12. Ecological information Ecotoxicity Persistence and degradability Bioaccumulative potential Mobility in soil Other adverse effects Very toxic to aquatic life. No data is available on the degradability of this product. No data available. No data available. No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component Version #: 02 Revision date: 10-December-2014 Issue date: 30-July / 6

5 13. Disposal considerations Disposal instructions Local disposal regulations Hazardous waste code Waste from residues / unused products Contaminated packaging 14. Transport information DOT Not regulated as dangerous goods. IATA Not regulated as dangerous goods. IMDG Not regulated as dangerous goods. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code 15. Regulatory information Collect and reclaim or dispose in sealed containers at licensed waste disposal site. This material and its container must be disposed of as hazardous waste. Do not allow this material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditches with chemical or used container. Dispose of contents/container in accordance with local/regional/national/international regulations. Dispose in accordance with all applicable regulations. The waste code should be assigned in discussion between the user, the producer and the waste disposal company. Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions). Empty containers should be taken to an approved waste handling site for recycling or disposal. Since emptied containers may retain product residue, follow label warnings even after container is emptied. Not applicable. US federal regulations This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR All components are on the U.S. EPA TSCA Inventory List. TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D) Not regulated. OSHA Specifically Regulated Substances (29 CFR ) Not listed. CERCLA Hazardous Substance List (40 CFR 302.4) LISTED LISTED Superfund Amendments and Reauthorization Act of 1986 (SARA) Hazard categories Immediate Hazard - No Delayed Hazard - No Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No SARA 302 Extremely hazardous substance Not listed. SARA 311/312 Hazardous No chemical SARA 313 (TRI reporting) Chemical name CAS number % by wt. Copper Silver Other federal regulations Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List Not regulated. Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR ) Not regulated Version #: 02 Revision date: 10-December-2014 Issue date: 30-July / 6

6 Safe Drinking Water Act Not regulated. (SDWA) US state regulations US. Massachusetts RTK - Substance List US. New Jersey Worker and Community Right-to-Know Act US. Pennsylvania Worker and Community Right-to-Know Law US. Rhode Island RTK US. California Proposition 65 California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. International Inventories Country(s) or region Inventory name On inventory (yes/no)* Australia Australian Inventory of Chemical Substances (AICS) Canada Domestic Substances List (DSL) Canada Non-Domestic Substances List (NDSL) No China Inventory of Existing Chemical Substances in China (IECSC) Europe European Inventory of Existing Commercial Chemical Substances (EINECS) Europe European List of Notified Chemical Substances (ELINCS) No Japan Inventory of Existing and New Chemical Substances (ENCS) No Korea Existing Chemicals List (ECL) New Zealand New Zealand Inventory Philippines Philippine Inventory of Chemicals and Chemical Substances (PICCS) United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory *A "" indicates this product complies with the inventory requirements administered by the governing country(s). A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s). 16. Other information, including date of preparation or last revision Issue date 30-July-2014 Revision date 10-December-2014 Version # 02 HMIS ratings Health: 0 Flammability: 0 Physical hazard: 0 Disclaimer Oatey Co. cannot anticipate all conditions under which this information and its product, or the products of other manufacturers in combination with its product, may be used. It is the user s responsibility to ensure safe conditions for handling, storage and disposal of the product, and to assume liability for loss, injury, damage or expense due to improper use. The information in the sheet was written based on the best knowledge and experience currently available Version #: 02 Revision date: 10-December-2014 Issue date: 30-July / 6