RITE Touch RT1050D Digital Glass Door Lock

Transcription

1 RITE TOUCH RT1050D DIGITAL GLASS DOOR LOCK DL-1 RITE Touch RT1050D Digital Glass Door Lock FULL GLASS ELECTRIFIED PRODUCT The surface-mounted RITE Touch RT1050D provides flexible, keyless access control for single or double all-glass doors. Function The RITE Touch RT1050D is a digital door lock that provides keyless access control for all-glass openings. The RITE Touch offers sophisticated styling, convenience, flexible access control, and safety and security for single or double glass doors. Perfect for indoor applications, the easy to install surfacemounted RITE Touch RT1050D combines elegant aesthetics with the latest touch screen technology, to harmonize style and security. Features Battery-operated lock uses 4 AA alkaline batteries Expected battery life is 1 year based on 10 daily uses Operating temperature 5 F to 130 F (-15 C to 55 C) Programming via touch-screen RITE Touch will support up to 40 credential cards (extra cards available seperately) Operation The surface-mounted lock features two options for credential actuation on the secure side of the door: either by entering a user code using a touch-screen or by using provided Mifare credential cards. The lock features dual unlock from the inside of the door, either by thumbturn or by using an override button. Specifications DOOR THICKNESS 7/16" to 1/2" thick glass doors, indoor applications only. LOCK BODY The RITE Touch RT1050D comes in an elegant mirrored finish. Front Body: 9/16" x 2-7/8" x 7-5/16" Back Body: 1-15/16" x 3-1/16" x 7-1/2" BOLT Twin bolts measuring 13/32" diameter with 1-1/8" throw. Bolt Extensions included separately in standard package for larger door gap, including twin bolts with 2-1/8" throw. STRIKE Surface-mounted strike plate for double glass doors provided. OPTIONS The RITE Touch RT1050D is designed for single or double glass doors. The surface-mounted strike is provided for double door applications. Extra credential cards available in packs of 5. STANDARD PACKAGE Individually boxed with mounting plate, AA batteries (x4), credential cards (x4), single door magnet, bolt extensions, thin door plate, and mounting screws. Shipping weight: 6 lbs. ARM-014-9/ Fax S. 51st Street, Ste 102 Phoenix, Arizona

2 DL-2 RITE TOUCH RT1050D DIGITAL GLASS DOOR LOCK All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions. Dimensions LOCKBODY 9/16" 14.3mm 31/64" 12.3mm 1-59/64" 48.8mm 2-55/64" 72.6mm 5/32" 4mm 1/16" 1.6mm 3-1/16" 77.8mm 7-21/64" 186.1mm 7-1/2" 190.5mm STRIKE PLATE 9/16" 14.3mm 31/64" 12.3mm 1-1/2" 38.1mm 3/16" 4.8mm 1-39/64" 40.9mm 1-51/64" 45.6mm 3/32" 2.4mm 7-21/64" 186.1mm 7-1/2" 190.5mm HOW TO ORDER RT1050D RITE TOUCH DIGITAL GLASS DOOR LOCK Specify quantity and the following information. RITE TOUCH RT MODEL 1050D 1050D For single or double doors RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately: Accessories Extra credential card 5 pack (RT-5C-1050). 2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.

3 1830 BOTTOM RAIL DEADLOCK (SWING BOLT) DL Bottom Rail Deadlock (Swing Bolt) FULL GLASS ALUMINUM GRADE 1 E8211 Operation 360 turn of key or thumbturn throws or retracts the counterbalanced bolt. Key can be removed only when bolt is in a positively locked or unlocked position. Lock accepts any standard 1-5/32" mortise cylinder from either or both sides. Cylinder must have dimensioned cam. Specifications HEIGHT () 31/32" and 1-1/8" only. CASE Steel with corrosion-resistant plating, measures 1" x 6" x depth (depth varies with cylinder height). The 1830 Bottom Rail Deadlock provides bottom rail locking in ultra-narrow stile or tempered glass doors. Tamper-proof with an armored faceplate, it protects with a minimum threshold strike opening. Function For bottom rail locking of ultra-narrow stile or tempered glass doors whose bottom rail (shoe) is too shallow for the 1861 Bottom Rail Deadbolt (see ). Mechanism is that of the 1850 Deadlock, but with the bolt size reduced. This keeps the threshold strike opening to a practical minimum, avoiding collection of debris or snagging on high-heeled shoes. Armor faceplate protects cylinder setscrews from tampering and keeps them from loosening. Not applicable to wood doors. BOLTS 15/32" x 5/8" x 2-1/8" with 5/8" throw. Six-ply laminated steel with eight plys within case. Center ply has aluminaceramic core to deter hacksaw attack. STRIKE See back page for dimensions of strike slot which can be cut in metal thresholds strike (shown) is available separately, with stainless steel trim plate and plastic box. CAM 1830 Bottom Rail Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with cam, dimensioned as shown. Cylinders with cams can be readily obtained from most cylinder manufacturers. See S section for cylinder make, thumbturn and trim ring information. DIMENSIONS OF CAM TO OPERATE: DEADLOCK.120" R 3.0mm.182" 4.6mm Dim A.800" ±.005" 20.3mm ±.127mm DEADLATCH EXIT DEVICES FLUSHBOLTS 4006 STRIKE OPTIONS Specify either 31/32" or 1-1/8" cylinder height (see dash table) strike and cylinder(s) available separately, if required..620" 15.7mm R.334" 8.5mm TRIM DIMENSIONS O STANDARD PACKAGE TO OPERA Individually boxed with machine screws for mounting DE Cylinders and/or thumbturns are available separately. Shipping weight: 1-1/2 lbs. THIS CAM AVAI.850" ±.005" FROM ABOVE CY 21.6mm ± MANUFACTUR.127mm ON SPECIAL O (OR MAKE FR STANDARD C ARM-014-9/14 A TRIM RING Fax TR CYL DOOR STILE Narro S. 51st Street, Ste 102 should Phoenix, Arizona harde B simply cylind

4 DL BOTTOM RAIL DEADLOCK (SWING BOLT) All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions. Dimensions Stile & Threshold Preparation 6-3/8" 161.9mm 5-31/32" 151.6mm 3/8" 9.5mm 1/4" 6.4mm A 1-11/32" 34.1mm 6-3/8" 161.9mm THRESHOLD 2-5/16" 58.7mm 21/32" 16.7mm 6-7/8" 174.6mm 29/64" 11.5mm 1" 25.4mm 2-3/16" 55.6mm 1-3/4" 44.5mm 1/2" 12.7mm DIA. (2 PLCS) DRILL & TAP (2 PLCS) HEIGHT 4006 Strike Dimensions 1-3/8" 34.9mm 1/2" 12.7mm DASH NO. -02 HEIGHT 31/32" 24.6mm DIM. A 1-5/8" 41.3mm Lock & Cylinder Installation TUBE SPACER 2-3/4" 69.9mm 2" 50.8mm 1-1/2" 38.1mm /8" 28.6mm 1-25/32" 45.2mm MIN. CHANNEL DEPTH: A + 1/32" 5/8" 15.9mm 3/8" 9.5mm 1/2" 12.7mm 9/16" 14.3mm 5/64" 2mm TUBE SPACERS MAY BE REQ D TO POSITION LOCK MACHINE SCREWS HOW TO ORDER 1830 BOTTOM RAIL DEADLOCK Specify quantity and the following information. Order related products separately. PRODUCT NO. DASH NO. (SPECIFY FOR HEIGHT AND LOCK DEPTH) FINISH Cylinder Height 31/32" Dim. "A" 1-5/8" 628 Clear Anodized 03 Cylinder Height 1-1/8" Dim. "A" 1-25/32" 313 Dark Bronze Anodized RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately: Accessories 4006 strike. Cylinder guards. Cylinders 1830 Bottom Rail Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with cam. 2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.

5 1837 TWO-POINT DEADLOCK DL Series Two-Point Deadlock WOOD GRADE 1 E8241 Maximum security for wood door pairs is provided with the 1837 Two-Point Deadlock. A single turn drops a bolt into the threshold and pivots the bolt. Function Maximum security for wood door pairs by a single turn of a key is provided with the Simultaneously dropping a stainless steel hexbolt into the threshold and pivoting the massive bolt into the opposite leaf, the 1837 eliminates inconvenient and sometimes forgotten flushbolts in the inactive leaf. Operation 360 turn of key or thumbturn throws counterbalanced bolt into opposite door and drops bolt into threshold. Key can be removed only when bolts are in a positively locked or unlocked position. Lock accepts any standard 1-5/32" diameter mortise cylinder from either or both sides. Cylinder must have dimensioned cam. Specifications 1-1/2" only. HEIGHT 36" standard. Other heights available on special order. CASE Steel with corrosion-resistant plate, measures 1" x 6" x 2-3/16". PIVOTED BOLT 5/8" x 1-3/4" x 2-7/8" with 1-3/8" throw. Eight-ply laminated steel with alumina-ceramic core to deter hacksaw attack. THRESHOLD BOLT Hexagonal 3/8", flat to flat. Stainless steel. ARMORED FACEPLATE Flat, two-piece plate extends to bottom of door. Standard finish is US28 (628) Clear Anodized. STRIKE For bolt, a strike plate with dust box is furnished. Threshold bolt strike can be 1/2" diameter hole in metal threshold or, if threshold is wood, 4005 strike is available as an option. CAM 1837 Two-Point Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with cam, dimensioned as shown. Cylinders with cams can be readily obtained from most cylinder manufacturers. See S section for cylinder make, thumbturn and trim ring information. DIMENSIONS OF CAM TO OPERATE: DEADLOCK.120" R 3.0mm.182" 4.6mm Dim A.800" ±.005" 20.3mm ±.127mm DEADLATCH EXIT DEVICES FLUSHBOLTS ARM-014-9/14 STANDARD PACKAGE Basic lock individually boxed with mounting screws. Hexbolt and rod packed separately with face extension plate, screws, bottom bolt guide, and attachment pin. Cylinders and/or thumbturns available separately. Shipping weight: 3 lbs..620" 15.7mm R.334" 8.5mm TRIM DIMENSIONS O TO OPERA 4070 DE THIS CAM AVAIL " ±.005" Fax FROM ABOVE CY 21.6mm ± MANUFACTUR.127mm S. 51st Street, Ste ON 102 SPECIAL OR (OR MAKE FR Phoenix, Arizona 85044STANDARD CA

6 DL TWO-POINT DEADLOCK All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions. Dimensions LOCK MOUNTING PLATE FACEPLATE 2-1/4" 57.2mm 63/64" 25mm 1-1/2" 38.1mm Installation INSTALL ADAPTOR ARM IN LOCK FROM REAR WITH BOLT RETRACTED AS SHOWN. DRIVE PIN THROUGH SLOTS IN LOCK SIDE PLATES, PASSING THROUGH HOLE IN THE ADAPTOR ARM. #12 X FLAT HEAD WOOD SCREW 1/8" 3.2mm 2-1/8" 54mm 1/8" 3.2mm 7/8" 22.2mm 1-1/2" 38.1mm 1" 25.4mm DIA. 8" 203.2mm 10-1/2" 266.7mm #8-32 X 1/4" FLAT HEAD MACHINES SCREWS (3) 30-5/32" 766mm 36" 914.4mm STANDARD HEIGHT #12 X 3" FLAT HEAD WOOD SCREW #6 X 3/4" FLAT HEAD WOOD SCREWS (6) 2-5/16" 58.7mm 1/2" 12.7mm 1" 25.4mm 1/4" 6.4mm DOOR BOTTOM BOLT GUIDE 3/4" 19.1mm 3-1/4" 82.6mm 5/8" 15.9mm 63/64" 25mm BOLT PROJECTION DOOR NOSE OF DOOR 7/8" 22.2mm 1/2" 12.7mm DIA. 3-3/8" 85.7mm BOLT GUIDE #8 X 1" FLAT HEAD WOOD SCREWS (3) HOW TO ORDER 1837 TWO-POINT DEADLOCK Specify quantity and the following information. Order related products separately. PRODUCT NO. FINISH Dark Bronze Anodized 626 Satin Chrome 335 Black Anodized 628 Clear Anodized 605 Bright Brass If cylinder height other than 36" is required, specify exact height from bottom of door to cylinder center. RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately: Accessories Cylinders 4005 trim strike for wooden threshold Two-Point Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with cam. 2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.

7 1847 DEADLOCK/DEADLATCH DL Series Deadlock/Deadlatch FULL GLASS ALUMINUM GRADE 1 E8291 The 1847 Deadlock/Latch for ultra-narrow stile siding doors features a self-protecting bolt with adjustable bolt projection. Function A compact lock designed to fit within very narrow sliding door stiles without compromising the high degree of security these doors need. The sturdy stainless steel bolt has two important features not usually found in sliding door hardware. First, it is adjustable: a full 3/16" lengthening or shortening of bolt projection is possible by turning an exposed screw in the face of the lock. This can compensate for considerable misalignment between door and jamb. Second, the 1847 bolt is self-protecting: if the door is closed with the bolt in the locked position, the bolt will retract immediately on contact with the jamb, thus preventing damage or accidental lock-out. Operation Can be operated by a standard cylinder, so the glass door may be keyed-in with other types of doors. Three hub slot positions allow installation even where jamb and stile design provides severely limited turn clearance. Specifications LATCH VERSION The same stainless steel hookbolt, but spring-loaded for automatic latching, is provided by the and All dimensions and available accessories for the 1847 deadlocks also apply to 1847 deadlatches. CASE Stainless steel, measures 1/2" x 3-3/16" x 1-1/8". ANTI-LIFT BOLT Three-ply laminated stainless steel. Designed to withstand approximately one-half ton force, either horizontal or vertical. Anti-lift bolt stops both door-from-jamb pry bar attacks and attempts to lift the door from its track. FACE Rectangular or full radiused ends (see table on back of page for dash numbers). STANDARD PACKAGE Case-packed with machines screws for mounting. Shipping weight: 1/3 lb ARM-014-9/ Fax S. 51st Street, Ste 102 Phoenix, Arizona

8 DL DEADLOCK/DEADLATCH All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions. Dimensions Stile Preparation 1-1/8" 28.6mm 3/32" 2.4mm 17/32" 13.5mm DRILL AND CSK FOR #6 SCREW (2 PLCS) SEE DASH NUMBER FOR SQUARE OR RADIUS ENDS 13/64" 5.2mm 5/32" 4mm FULL RADIUS TYP. 3/8" 9.5mm MAX. ADJUSTMENT 3/16" 4.8mm 3-11/16" 93.7mm 15/64" 6mm 3-7/32" 81.8mm NOTE: DIMENSIONS SHOWN ARE RECOMMENDED MINIMUM 1" 25.4mm 3/8" DIA. 9.5mm 1-31/32" 50mm 17/32" 13.5mm 25/32" 19.8mm 45 SEE DASH NUMBERS FOR VARIOUS HUB ANGLES 3-3/16" 81mm 3-11/16" 93.7mm Installation 7/64" 2.8mm MIN. 17/64" 6.7mm MIN. 3/4" 19.1mm 1/4" R 6.4mm 27/64" 10.7mm 4-1/32" 102.4mm 3/8" 9.5mm LOCK & STILE STRIKE CUTOUT HUB 11/16" 17.5mm TAP #6-32 THREAD TYP. 11/64" 4.4mm 1-1/16" 27mm 3/16" 4.8mm HUB HOW TO ORDER 1847 DEADLOCK/DEADLATCH Specify quantity and the following information. Order related products separately. PRODUCT NO. FACE SHAPE, HUB ANGLE, LOCK OR LATCH FINISH (blank) See Configuration Table 02 See Configuration Table 06 See Configuration Table 09 See Configuration Table 10 See Configuration Table 11 See Configuration Table 13 See Configuration Table 630 Satin Stainless 1847 LOCK LOCK LOCK LOCK LOCK LOCK LOCK RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately: Accessories Cylinders Trim strikes. Turns and cylinder pulls. 2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.

9 1850S DEADLOCK DL S Series Deadlock ALUMINUM GRADE 1 E8211 Specifications 7/8", 31/32", 1-1/8", or 1-1/2" only. CASE Steel with corrosion-resistant plating, measures 1" x 6" x depth. Depth varies by backset (see table on back of page). BOLT 5/8" x 1-3/8" x 2-7/8" with 1-3/8" throw. Eight-ply laminated stainless steel. Center ply has alumina-ceramic core to defeat any hacksaw attack, including rod-type super hacksaws. FACEPLATE Measures 1" x 6-7/8" The 1850S Deadlock utilizes a laminated stainless steel bolt, activated by a pivot mechanism to provide maximum security for a single leaf narrow stile door. Function A huge bolt of laminated stainless steel, nearly three inches long, activated by an uncomplicated pivot mechanism, has made this basic Deadlock the standard of the narrow stile door industry. The length of this bolt provides maximum security for a single leaf door, even a very tall and flexible one or an installation where the gap between the door and jamb is greater than it should be. Operation 360 turn of key or thumbturn throws or retracts the counterbalanced bolt. Key can be removed only when bolt is in a positively locked or unlocked position. Lock accepts any standard 1-5/32" diameter mortise cylinder or thumbturn from either or both sides. Cylinder must have dimensioned cam. ARM-014-9/14 STRIKE See back of page for dimensions of strike slot which can be cut in metal jamb. Trim plate, box strike, and armored strike are available separately. CAM 1850S Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with cam dimensioned as shown. Cylinders with cams can be readily obtained from most cylinder manufacturers. See S section for cylinder make, thumbturn and trim ring information. DIMENSIONS OF CAM TO OPERATE:.120" R 3.0mm.182" 4.6mm Dim A.800" ±.005" 20.3mm ±.127mm OPTIONS For jambs too narrow to accept the long bolt, the 1850S-050 offers a shorter bolt with hook shape to provide equal security against door-prying attempts. 1850S-020 short throw without hook is also available. Second and third point locking bolts are available for pairs of doors. All use any make standard mortise cylinder and thus can be keyed into systems with other types of doors. SCHOOLHOUSE version, also available, is modified so that operation from inside is unlock.850" only. ±.005" This lock is handed and must be specified LH or RH. 21.6mm Specify ±.127mmSeries DEADLOCK DEADLATCH EXIT DEVICES FLUSHBOLTS TRIM THIS CAM AVAILAB FROM ABOVE CYLIN MANUFACTURER ON SPECIAL ORD SCH1850S. Same faceplate and backset options as (OR MAKE FROM Series 1850S. Operation from inside, with standard STANDARD CAM.620" R Adams Rite 15.7mm 4066 Turn or with 4550 Deadlock Lever. For.334" wood or hollow metal, see 1850SN. 8.5mm hardened STANDARD PACKAGE Individually boxed with machine screws for mounting. Cylinders and/or thumbturns available separately. Shipping weight: 1-1/2 lbs. TRIM RING TR CYLIN DOOR STILE Narrow s shoulder A B simply a cylinder m Fax LOCK CASE determin S. 51st Street, Ste 102 CAM FOR M Phoenix, Arizona TR* = A DOOR CENTERLINE 1 M M M M 1 M M DIMENSIONS OF TO OPERAT 4070 DEA

10 DL S DEADLOCK All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions. Dimensions HOW IS MEASURED: Stile Preparation STILE 53/64" 21mm 29/64" 11.5mm A 29/64" 1" 11.5mm 25.4mm SHOWN WITH FLAT FACEPLATE MEASURED AT CENTERLINE OF STILE NOSE FLAT RADIUS 6-57/64" 175mm 1-19/32" 40.5mm DIA. HOLE 6-53/64" 173.4mm 6" 152.4mm 1/4" 6.4mm 1-13/32" 35.7mm 6-3/8" 161.9mm 6-7/8" 174.6mm 7/8" 22mm 31/32" 24.6mm 1-1/8" 28.6mm 1-1/2" 38.1mm BEVEL A 1-9/16" 34.7mm 1-5/8" 41.3mm 1-25/32" 45.2mm 2-1/4" 57.2mm ARMORED FACEPLATE 1" X 6-7/8" FLAT 1850S Lock & Cylinder Installation 1-3/8" 34.9mm LOCK & STILE 11/16" 17.5mm STRIKE CUTOUT 5/32" R 4mm (4 PLCS.) 1-1/64" 25.8mm 1/4" 6.4mm RADIUS 1851S RADIUS W/ WEATHERSTRIP 1851SW 1" 25.4mm 3-3/8" 85.7mm 59/64" 23.4mm LH BEVEL 1852S-X15 RH BEVEL 1852S-X16 HOW TO ORDER 1850S DEADLOCK Specify quantity and the following information. Order related products separately. PRODUCT NO. FACEPLATE HANDING FINISH 185 0S S Flat 1 7/8" 15 LH or RHR 313 Dark Bronze Anodized 1S Radius 2 31/32" 16 RH or LHR 335 Black Anodized 1SW Radius with weatherstrip 3 1-1/8" 10 Non-Handed* 628 Clear Anodized 2S Bevel 4 1-1/2" *Any flat or radius faceplate, except Schoolhouse. RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately: Accessories Cylinders Trim Special Order Options 4015 Threshold Bolt or 4016 Header Bolt for multipoint locking Header Bolt for pairs of doors. 4000, 4001, 4002 Deadlock Strikes. Lock mounting accessories and options. 1850S Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with cam. Deadlock lever trim and keyless entry trim. Exit indicators. Schoolhouse function available as special order. 2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.

11 1850S-050 DEADLOCK DL S-050 Series Deadlock ALUMINUM GRADE 1 E8281/E8291 The 1850S-050 Deadlock utilizes a laminated stainless steel hookbolt, activated by a pivot mechanism to provide maximum security for a sliding narrow stile door. Specifications 7/8", 31/32", 1-1/8", or 1-1/2" only. CASE Steel with corrosion-resistant plating, measures 1" x 6" x depth. Depth varies by backset (see table on back of page). BOLT 5/8" x 1-3/8" with 13/16" throw. Eight-ply laminated stainless steel. Center ply has alumina-ceramic core to defeat any hacksaw attack, including rod-type super hacksaws, while hook shape repels pry bar attempts to spread the door from its jamb or lift it off its track. FACEPLATE Measures 1" x 6-7/8". STRIKE See back of page for dimensions of strike slot which can be cut in metal jamb. Trim plate, box strike, and armored strike are available separately. Function The 1850S-050 Deadlock answers the security need of sliding glass doors in commercial, industrial, and institutional buildings. The mechanism is identical to the widely used Maximum Security swinging door lock, except that the massive laminated bolt is provided in a hook shape to resist the parting motion of sliding door and jamb. The over-center locking action assures that forced entry attempts to pry the door in any direction, up, down, or sideways will be defeated. Operation 360 turn of key or thumbturn throws or retracts the counterbalanced bolt. Key can be removed only when bolt is in a positively locked or unlocked position. Lock accepts any standard 1-5/32" diameter mortise cylinder or thumbturn from either or both sides. Cylinder must have dimensioned cam. CAM 1850S-050 Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with cam dimensioned as shown. Cylinders with cams can be readily obtained from most cylinder manufacturers. See S section for cylinder make, thumbturn and trim ring information. DIMENSIONS OF CAM TO OPERATE:.120" R 3.0mm.182" 4.6mm Dim A.800" ±.005" 20.3mm ±.127mm DEADLOCK DEADLATCH EXIT DEVICES FLUSHBOLTS OPTIONS TRIM Cylinder backset and faceplate finish and shape (radiused, flat or bevel cross-section to match door nose) must be specified. SCHOOLHOUSE version, also available, is modified so that operation from inside is unlock only. This DIMENSIONS lock is OF C handed and must be specified LH or RH. Specify Series TO OPERATE: SCH1850S-050. Same faceplate and backset options 4070 as DEAD Series 1850S-050. Operation from inside, with standard Adams Rite 4066 Trim or with 4550 Deadlock Lever. For THIS CAM AVAILABLE wood or hollow metal, see 1850SN..850" ±.005" FROM ABOVE CYLINDE 21.6mm ± MANUFACTURERS.127mm ON SPECIAL ORDER STANDARD PACKAGE (OR MAKE FROM STANDARD CAM) Individually.620" boxed R with machine screws for mounting. Cylinders 15.7mm and/or thumbturns available.334" separately. Shipping weight: 1-1/2 lbs. 8.5mm ARM-014-9/14 A hardened s TRIM RING TR CYLIND DOOR STILE Narrow stile shoulder an B simply a len Fax cylinder ma LOCK CASE determined S. 51st Street, Ste 102 CAM Phoenix, Arizona FOR TR* = A + DOOR CENTERLINE

12 DL S-050 DEADLOCK All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions. Dimensions 53/64" 21mm 5/8" 15.9mm 1" 25.4mm HOW IS MEASURED: Stile Preparation STILE A SHOWN WITH FLAT FACEPLATE FLAT 1-19/32" 40.5mm 27/64" 15/64" 10.7mm 6mm MEASURED AT CENTERLINE OF STILE NOSE RADIUS 1-27/32" 46.8mm 6-57/64" 175mm LOCKFACE DIA. HOLE 6-53/64" 173.4mm 6-3/8" 161.9mm 6" 152.4mm 51/64" 20.2mm 13/32" 10.3mm 5/8" 15.9mm 6-7/8" 174.6mm 7/8" 22.2mm 31/32" 24.6mm 1-1/8" 28.6mm 1-1/2" 38.1mm BEVEL "A" 1-9/16" 39.7mm 1-5/8" 41.3mm 1-25/32" 44.5mm 2-1/4" 57.2mm ARMORED FACEPLATE 1" X 6-7/8" LOCK & STILE 5/32" R 4mm (4 PLCS.) 11/16" 17.5mm 1-1/64" 25.8mm Lock & Cylinder Installation FLAT 1850S /16" 55.6mm STRIKE CUTOUT 1/4" 6.4mm RADIUS 1851S-050 RADIUS W/ WEATHERSTRIP 1851SW-050 1/4" 6.4mm 1-15/16" 49.2mm 59/64" 23.4mm LH BEVEL 1852S-055 RH BEVEL 1852S-056 HOW TO ORDER 1850S-050 DEADLOCK Specify quantity and the following information. Order related products separately. PRODUCT NO. FACEPLATE HANDING FINISH 185 0S S Flat 1 7/8" 55 LH or RHR 313 Dark Bronze Anodized 1S Radius 2 31/32" 56 RH or LHR 335 Black Anodized 1SW Radius with weatherstrip 3 1-1/8" 50 Non-Handed* 628 Clear Anodized 2S Bevel 4 1-1/2" *Any flat or radius faceplate. RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately: Accessories Cylinders Trim Special Order Options 4015 Threshold Bolt or 4016 Header Bolt for multi-point locking Header Bolt for pairs of doors. Deadlock Strikes. Lock mounting accessories and options. 1850S-050 Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with cam. Deadlock lever trim and keyless entry trim. Exit indicators. Schoolhouse function available as special order. 2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.

13 1850SN DEADLOCK (ANSI SIZE) DL SN Series Deadlock (ANSI Size) Operation 360 turn of key or thumbturn throws or retracts the counterbalanced bolt. Key can be removed only when bolt is in a positively locked or unlocked position. Lock accepts any standard 1-5/32" diameter mortise cylinder from either or both sides. Cylinder must have dimensioned cam. Specifications 1-1/2" only. HOLLOW METAL WOOD GRADE 1 E8211 The ANSI size 1850SN Deadlock utilizes a laminated stainless steel bolt, activated by a pivot mechanism to provide maximum security for hollow metal or wood doors. Function For hollow metal or wood doors prepared for hardware according to the specifications of the American National Standards Institute (ANSI), the 1850SN Deadlock provides maximum security and ease of installation. Its standard 1-1/2" backset dimension provides adequate clearance for the deep stop on the door jamb of hollow metal entrances. CASE Steel with corrosion-resistant plating, measures 1" x 6" x 2-1/4". BOLT 5/8" x 1-3/8" x 2-7/8" with 1-3/8" throw. Eight-ply laminated stainless steel. Center ply has alumina-ceramic core to defeat any hacksaw attack, including rod-type super hacksaws. STRIKE Available in lipped, ANSI-spec version in steel with chrome finish. See back of page for dimensions of strike slot which can be cut in metal jamb. Other strikes are available separately. CAM 1850SN Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with cam dimensioned as shown. Cylinders with cams can be readily obtained from most cylinder manufacturers. See S section for cylinder make, thumbturn and trim ring information. DIMENSIONS OF CAM TO OPERATE:.120" R 3.0mm.182" 4.6mm Dim A.800" ±.005" 20.3mm ±.127mm OPTIONS Second and third point locking bolts are available for pairs of steel doors. Shorter hookbolt version also available. All use any make standard mortise cylinder and thus can be keyed into systems with other types of doors. SCHOOLHOUSE version, also available, is modified so that operation from inside is unlock only. This lock is handed and must be specified LH or RH. Specify Series SCH1850SN. Same faceplate and backset options as Series 1850SN. DEADLOCK DEADLATCH EXIT DEVICES FLUSHBOLTS TRIM DIMENSIONS OF TO OPERATE 4070 DEAD THIS CAM AVAILABL Operation from inside, with standard Adams.850" Rite ±.005" 4066 Turn. FROM ABOVE CYLIND 21.6mm ± MANUFACTURERS.127mm ON SPECIAL ORDE STANDARD PACKAGE (OR MAKE FROM Individually boxed with machine screws for mounting. STANDARD CAM).620" Cylinders and/or R 15.7mm thumbturns available separately..334" Shipping weight: 1-1/2 lbs. 8.5mm ARM-014-9/14 A TRIM RING TR CYLIND DOOR STILE Narrow sti Fax shoulder a S. 51st Street, Ste 102 hardened Phoenix, Arizona B simply a le cylinder m LOCK CASE determine

14 DL SN DEADLOCK (ANSI SIZE) All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions. Dimensions Jamb & Stile Preparation FOR ANSI STRIKE STILE 53/64" 21mm 19/32" 15.1mm HOW IS MEASURED: 1/4" 6.4mm 53/64" 21mm 2-9/64" 54.4mm 11/32" 8.7mm 2-7/32" 56.4mm 1-17/32" 38.9mm SHOWN WITH FLAT FACEPLATE MEASURED AT CENTERLINE OF STILE NOSE FLAT 3-3/8" 85.7mm 4-7/8" 123.8mm 8-1/64" 203.6mm DIA. 7-15/16" 201.6mm 59/64" 23.4mm 6" 152.4mm 7-1/4" 184.2mm 8" 203.2mm RADIUS BEVEL ARMORED FACEPLATE X 8" FLAT 1850SN LOCK & STILE 1-17/64" 32.1mm Lock & Cylinder Installation 1-1/2" 38.1mm RADIUS 1851SN LH BEVEL 1852SN /8" 34.9mm 11/16" 17.5mm STRIKE CUTOUT 1/4" 6.4mm 1-25/64" 35.3mm RH BEVEL 1852SN /8" 1" 85.7mm 25.4mm 59/64" 22.6mm HOW TO ORDER 1850SN DEADLOCK Specify quantity and the following information. Order related products separately. PRODUCT NO. FACEPLATE ANSI SIZE HANDING FINISH SN Flat 415 LH or RHR 313 Dark Bronze Anodized 1 Radius 416 RH or LHR 335 Black Anodized 2 Bevel 410 Non-Handed* 628 Clear Anodized *Any flat or radius faceplate, except Schoolhouse. If ANSI strike required, specify 4003ANSI and finish: 626 or 605 (see ACCESSORIES). RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately: Accessories Cylinders Trim Special Order Options 4015 Threshold Bolt or 4016 Header Bolt for multi-point locking Header Bolt for hollow metal pairs of doors Header Bolt not recommended for wood applications. Deadlock strikes. Lock mounting accessories and options. 1850SN Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with cam. Deadlock lever trim & keyless entry trim. Schoolhouse function available as special order. 2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.

15 1850SN-050 DEADLOCK (ANSI SIZE) DL SN-050 Deadlock (ANSI Size) Operation 360 turn of key or thumbturn throws or retracts the counterbalanced bolt. Key can be removed only when bolt is in a positively locked or unlocked position. Lock accepts any standard 1-5/32" diameter mortise cylinder or thumbturn from either or both sides. Cylinder must have dimensioned cam. Specifications HOLLOW METAL WOOD GRADE 1 E8281/E /2" only. CASE Steel with corrosion-resistant plating, measures 1" x 6" x 2-1/4". The ANSI size 1850SN-050 Deadlock utilizes a laminated stainless steel hookbolt, activated by a pivot mechanism to provide maximum security for wood or hollow metal doors. Function For hollow metal or wood sliding doors prepared for hardware according to the specifications of the American National Standards Institute (ANSI), this deadlock provides maximum security and ease of installation. Its standard 1-1/2" backset dimension provides adequate clearance for the deep jamb pocket of many commercial and industrial entrances. Also useful for swinging doors closing against jambs too shallow for the 1-3/8" throw of the 1850SN swinging door deadlock. ARM-014-9/14 BOLT 5/8" x 1-3/8" with 13/16" throw. Eight-ply laminated stainless steel. Center ply has alumina-ceramic core to defeat any hacksaw attack, including rod-type super hacksaws, while hook shape repels pry bar attempts to spread the door from its jamb or lift it off its track. FACEPLATE Measures x 8". STRIKE See back of page for dimensions of strike slot which can be cut in metal jamb. Trim plate, box strike, and armored strike are also available. CAM 1850SN-050 Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with cam dimensioned as shown. Cylinders with cams can be readily obtained from most cylinder manufacturers. See S section for cylinder make, thumbturn DIMENSIONS and trim ring OF information. CAM TO OPERATE:.120" R 3.0mm.182" 4.6mm Dim A.800" ±.005" 20.3mm ±.127mm OPTIONS Cylinder backset and faceplate finish and shape (radiused, flat or bevel cross-section to match door nose) must be specified. SCHOOLHOUSE version, also available, is modified so that operation from inside is unlock only. This lock is handed and must be specified LH or RH. Specify Series SCH1850SN-050. Same faceplate and backset options as Series 1850SN-050. Operation from inside, DEADLOCK DEADLATCH EXIT DEVICES FLUSHBOLTS TRIM DIMENSIONS OF TO OPERATE 4070 DEAD with standard Adams Rite 4066 Turn. THIS CAM AVAILABL STANDARD PACKAGE.850" ±.005" FROM ABOVE CYLIND 21.6mm ± MANUFACTURERS.127mm Individually boxed with machine screws for mounting. ON SPECIAL ORDE (OR MAKE FROM Cylinders and/or thumbturns available separately. Shipping STANDARD CAM) weight: 1-1/2.620" lbs. R 15.7mm.334" 8.5mm Fax S. 51st Street, Ste 102 Phoenix, Arizona TRIM RING TR CYLIND DOOR STILE Narrow sti

16 DL SN-050 DEADLOCK (ANSI SIZE) All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions. Dimensions Stile & Wood Door Preparation 53/64" 21mm 2-7/32" 56.4mm 1-15/32" 37.3mm 19/32" 15.1mm SHOWN WITH FLAT FACEPLATE HOW IS MEASURED: STILE 2-9/32" 57.9mm 1/4" 6.4mm 2-9/64" 54.4mm 1" 25.4mm 31/32" 11/32" 24.6mm 8.7mm 1-15/32" 37.3mm MEASURED AT CENTERLINE OF STILE NOSE FLAT RADIUS 8-1/64" 203.6mm 1-1/2" 38.1mm DIA. 8-1/64" 203.6mm 7/8" 22.2mm TYP. 1-1/2" 38.1mm DIA. 7-15/16" 201.6mm 7-1/4" 184.2mm 6" 152.4mm 13/32" 10.3mm 5/8" 15.9mm 8" 203.2mm BEVEL ARMORED FACEPLATE X 8" FLAT 1850SN /64" 32.1mm 1-17/64" 32.1mm Lock & Cylinder Installation 2-3/8" 60.3mm 51/64" 20.2mm RADIUS 1851SN-450 LOCK & STILE LH BEVEL 1852SN-455 RH BEVEL 1852SN /16" 55.6mm 11/16" 17.5mm STRIKE CUTOUT 1/4" 6.4mm 1-15/16" 49.2mm 1/4" 6.4mm 59/64" 23.4mm HOW TO ORDER 1850SN-050 DEADLOCK (ANSI SIZE) Specify quantity and the following information. Order related products separately. PRODUCT NO. FACEPLATE ANSI SIZE HANDING FINISH SN Flat 455 LH or RHR 313 Dark Bronze Anodized 1 Radius 456 RH or LHR 335 Black Anodized 2 Bevel 450 Non-Handed* 628 Clear Anodized *Any flat or radius faceplate. RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately: Accessories Cylinders Trim Special Order Options 4015 Threshold Bolt or 4016 Header Bolt for multi-point locking Header Bolt for hollow metal pairs of doors Header Bolt not recommended for wood applications. Deadlock strikes. 1850SN-050 Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with cam. Deadlock lever trim & keyless entry trim. Schoolhouse function available as special order. 2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.

17 1861 BOTTOM RAIL DEADBOLT DL Series Bottom Rail Deadbolt FULL GLASS GRADE 1 E8211 The 1861 Bottom Rail Deadbolt provides maximum security with deadbolt over-center/pivot locking mechanism. It utilizes hardened steel bolts for the limited space of ultra-narrow stile doors. Operation 360 turn of key or thumbturn throws or retracts bolt(s). Key can be removed only when bolts are in a positively locked or unlocked position. Lock accepts any standard 1-5/32" diameter mortise cylinder from either or both sides. Cylinder must have dimensioned cam. Specifications Minimum backset is approximately 2-1/4" for the with vertical bolt only. The with vertical and horizontal bolts requires placement of cylinder centerline 5-3/4" from nose of door. Both have cylinder center 1-7/8" above bottom edge of door. CASE Steel with corrosion-resistant plate, measures 1" x 6" x 1-13/16". BOLTS 3/8" diameter. Stainless steel vertical threshold bolt has 13/16" throw. Hardened steel horizontal bolt has 1-1/8" throw. Function Using the same over-center/pivot locking mechanism as the basic deadbolt, the 1861 lies horizontally in the bottom rail of ultra-narrow stile doors which have insufficient vertical space for a lock, and tempered glass doors which have no stile at all. The hardened steel cylindrical bolts allow simple drilled strike holes of a relatively small size to minimize the nuisance and danger presented by some threshold strikes in collecting debris or snagging on high-heeled shoes locks either single-leaf or pairs of doors. Not recommended for wood doors STRIKES In metal installation, 7/16" drilled holes in threshold are required. For , drilled holes are also required in jamb or opposite door. For wood, metal plate with 7/16" hole must be provided for each bolt. CAM 1861 Bottom Rail Deadbolts are operable by any standard 1-5/32" diameter mortise cylinder with cam dimensioned as shown. Cylinders with cams can be readily obtained from most cylinder manufacturers. See S section for cylinder make, thumbturn DIMENSIONS and trim ring OF information. CAM TO OPERATE:.120" R 3.0mm.182" 4.6mm Dim A STANDARD PACKAGE Individually boxed with mounting screws. Cylinders and/or thumbturns available separately. Shipping weight: : 1-3/4 lbs., : 2 lbs..620" 15.7mm R.334" 8.5mm.800" ±.005" 20.3mm ±.127mm.850" ±.005" 21.6mm ±.127mm DEADLOCK DEADLATCH EXIT DEVICES FLUSHBOLTS TRIM DIMENSIONS OF C TO OPERATE: 4070 DEAD THIS CAM AVAILABLE FROM ABOVE CYLINDE MANUFACTURERS ON SPECIAL ORDER (OR MAKE FROM STANDARD CAM) ARM-014-9/ Fax TRIM RING S. 51st Street, TR Ste 102 CYLIND DOOR Phoenix, STILE Arizona Narrow stile shoulder an hardened s

18 DL BOTTOM RAIL DEADBOLT All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions. Dimensions 3/4" 19.1mm THROW 1-1/8" 21.6mm 3/8" DIA. 9.5mm 4" 101.6mm 3-5/8" 92.1mm 5-25/64" 136.9mm 7-15/16" 201.6mm 3/8" 9.5mm 1-55/64" 47.2mm 9/16" 14.3mm BOTTOM RAIL MTG. WEB 63/64" 25mm 1" 25.4mm UNIT ILLUSTRATED IS (BOTH HORIZONTAL & VERTICAL BOLTS INCLUDED.) PART NUMBER FOR VERTICAL BOLT OPERATION ONLY IS CONVERSION KIT NO AVAILABLE TO CONVERT TO SEE BELOW: 4014 Conversion Kit To convert to , 4014 Conversion Kit provides horizontal bolt assembly with guide and attachment fittings. The 4014 Conversion Kit consists of: 1 Arm & Bolt Assembly 2 Assembly Pin 3 Bolt Guide Bracket 4 Mounting Screws To assemble, press pin through disc and arm. BOTTOM OF DOOR Rail Preparation 7/16" 11.1mm DIA. 1/4" 6.4mm 4" 101.6mm RAIL WITHOUT WEB #8-32 DRILL & TAP TYP. 2" 50.8mm 7-1/4" 184.2mm FOR /16" 14.3mm 1/2" 12.7mm 6-1/8" 155.6mm TUBE SPACER 2-1/2" MIN. 63.5mm CHANNEL DEPTH 5-49/64" 146.4mm DIA. #10-32 DRILL & TAP TYP. 1" 25.4mm TUBE SPACERS MAY BE REQUIRED TO POSITION LOCK MECHANISM. 1-11/16" 42.9mm BOTTOM DOOR RAILS WITH WEB WILL REQUIRE MACHINING AS SHOWN. POSITION OF WEB WILL DETERMINE TUBE SPACER REQUIREMENT AND TUBE SPACER LENGTH. Lock & Cylinder Installation HOW TO ORDER 1861 BOTTOM RAIL DEADBOLT Specify quantity and the following information. Order related products separately. PRODUCT NO. BOLT OPERATION FINISH PACKAGING IB 01 Vertical Bolt Only 603 Zinc plated steel IB Individually Boxed 02 Vertical and Horizontal Bolts If tube spacers are required, specify QUANTITY and LENGTH. RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately: Accessories 4014 Conversion Kit for multi-point locking applications or it can be ordered with vertical and horizontal bolts (Bolt Operation option 2). Cylinders 1861 Bottom Rail Deadbolts are operable by any standard 1-5/32" diameter mortise cylinder with cam. 2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.

19 5 TWO-POINT DEADLOCK DL-19 5 Two-Point Deadlock Operation 90 rotation of turn throws or retracts bolts. 360 turn of key deadlocks mechanism, preventing operation of the turn in either locked or unlocked position. Specifications Bolt arms require inside stile clearance of 1-11/16" on one side of cylinder center, 1" on the other. ROLL-UP DOOR GRADE 2 E86182 The 5 Two-Point Deadlock provides security for roll-up doors, security screens, or similar doors. Two bolts are operational from either or both sides of the deadlock. Function For overhead garage doors, roll-up security screens, or similar doors. Provides turn operation of two bolts from either or both sides. Accepts standard mortise cylinders for key control of bolts to secure them in either projected or retracted position TURN CASE Steel with corrosion-resistant plate, measures 1" x 6" x 2-5/8". BOLT AR 1-1/32" throw. Threaded for 1/4" 20 rods. Because of design variations in this type of door, no standard bolt can be offered to fit all makes of doors. Contact the Adams Rite factory concerning bolts, rods, bolt guides, and strikes to fit individual door designs TURN Zinc alloy escutcheon and handle. Finish is US26D. Steel spindle is also available to accommodate various door thicknesses. CAM 5 Two-Point Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with cam dimensioned as shown. Cylinders with cams can be readily obtained from most cylinder manufacturers. See S section for cylinder make, thumbturn and trim ring information. DIMENSIONS OF CAM TO OPERATE:.120" R 3.0mm.182" 4.6mm OPTIONS 4060 Turn shown is available with choice of spindle lengths. Bolts, connecting rods, bolt guides, and strikes are available by special order. Cylinders also available separately. STANDARD PACKAGE Shipping weight: 1-1/2 lbs..620" 15.7mm R Dim A.334" 8.5mm.800" ±.005" 20.3mm ±.127mm.850" ±.005" 21.6mm ±.127mm DEADLOCK DEADLATCH EXIT DEVICES FLUSHBOLTS TRIM DIMENSIONS OF C TO OPERATE: 4070 DEAD THIS CAM AVAILABLE FROM ABOVE CYLINDE MANUFACTURERS ON SPECIAL ORDER (OR MAKE FROM STANDARD CAM) ARM-014-9/14 A TRIM RING TR CYLIND DOOR STILE Fax Narrow stile shoulder an S. 51st Street, Ste 102 hardened s Phoenix, Arizona B85044 simply a len cylinder ma LOCK CASE determined

20 DL-20 5 TWO-POINT DEADLOCK All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions. Dimensions 7-15/16" 201.6mm 6" 152.4mm 7-1/4" 184.2mm 11/32" 8.7mm 1-1/64" 25.8mm 1/4-20 NC (2 PLCS) 1-21/32" 42.1mm 1" 25.4mm 1-23/32" 43.7mm 2-5/8" 66.8mm MAX. 1-1/32" 26.2mm TRAVEL 3-1/2" 88.9mm 8-63/64" 228.2mm 1-63/64" 50.4mm 1-1/32" 26.2mm TRAVEL 1" 25.4mm 4060 Turn Installation 2-1/8" 54mm 2-7/8" 73mm 7/8"* 22.2mm 51/64" 20.2mm NOTE: INSTALLATION REQUIREMENTS VARY ACCORDING TO RAIL DESIGN 1-1/2" 38.1mm *FOR 1-3/4" THICK DOOR NF, 2 PLCS (HOLE LOCATION FOR 4060 HANDLE ASSY) 2-1/8" 54mm 3-15/32" 88.1mm 3/8" 9.5mm DIA. 11/16" 17.5mm MIN. 1/2" DIA. 12.7mm 1-11/16" 42.9mm MIN. 3/16" DIA. 4.8mm (2 PLCS) 23/32" 18.3mm HOW TO ORDER 5 TWO-POINT DEADLOCK Specify quantity and the following information. Order related products separately. PRODUCT NO. PACKAGING 5 -IB IB Individually Boxed RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately: Accessories Cylinders Special Order Options 4060 turn. Cylinder guards. 5 Two-Point Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with cam. Bolts, connecting rods, bolt guides and strikes are by special order only. 2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.

21 +1890 DEADLOCK/DEADLATCH DL Series Deadlock/Deadlatch Specifications 31/32", 1-1/8", or 1-1/2". CASE Steel with corrosion-resistant plating, measures 1" x 7-3/8" x depth. Depth varies by backset (see table on back of page). LATCHBOLT Zinc alloy with Delrin face for smooth, quiet action, measures 5/8" x 5/8" with 7/16" throw. Handing easily reversible. Bolt can be held fully retracted to allow door to be free swinging (see illustration on back of page). ALUMINUM GRADE 1 E82101 The Deadlock/Latch provides a maximum security deadlock for after hour and traffic control convenience during business hours. Function Maximum Security deadlock after hours, plus traffic control convenience for management during the business day. Typical installation is a bank or store requiring three modes of door control: 1. Both lock and latch bolts retracted for unrestricted entry and exit during business hours, 2. Handle-operated latch for exit-only traffic just after closing and 3. Maximum Security hookbolt for overnight lockup. NOTE: Handle or paddle operates latchbolt only. Operation 360 turn of key or thumbturn throws or retracts the hook-shaped deadlock. 120 further turn retracts latch bolt as well. Cylinder may be any make standard 1-5/32" diameter mortise type with dimensioned cam (see S). Handle retracts spring-loaded latchbolt only ARMORED STRIKE LOCKBOLT 5/8" x 1-3/8" with 13/16" throw. Eight-ply laminated stainless steel. Center ply has alumina-ceramic core to defeat any hacksaw attack, including rod-type super hacksaws, while hook shape repels pry bar attempts to spread the door from its jamb or lift it off its track. ARMORED STRIKE Satin stainless steel trimplate with steel mounting plate and dust box. Flat strike furnished. Also available for pairs of doors in radius shape, or flat with square corners for ANSI hollow metal jambs. Flat strikes also available with longer lip Deadlock/Latch cannot be used with electric strikes. CAM Series locks are operable by any standard 1-5/32" diameter mortise cylinder with cam dimensioned as shown. Cylinders with cams can be readily obtained from most cylinder manufacturers. See S section for cylinder make, thumbturn and trim ring information. DIMENSIONS OF CAM TO OPERATE:.120" R 3.0mm.182" 4.6mm Dim A OPTIONS Order handle/paddle for one side only or both sides. Handles/paddles on both sides solve, with minimum traffic impediment, the problem of doors that stand ajar due to wind or air-conditioning pressures. STANDARD PACKAGE Individually boxed with strike and machine screws for mounting. Cylinders available separately. Shipping weight: 2 lbs..620" 15.7mm R.334" 8.5mm.800" ±.005" 20.3mm ±.127mm.850" ±.005" 21.6mm ±.127mm DEADLOCK DEADLATCH EXIT DEVICES FLUSHBOLTS TRIM DIMENSIONS OF C TO OPERATE: 4070 DEAD THIS CAM AVAILABLE FROM ABOVE CYLINDE MANUFACTURERS ON SPECIAL ORDER (OR MAKE FROM STANDARD CAM) ARM-014-9/ Fax TRIM RING S. 51st Street, TR Ste 102 CYLIND DOOR Phoenix, STILE Arizona Narrow stile shoulder an hardened s

22 DL DEADLOCK/DEADLATCH All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions. Dimensions 53/64" 21mm 3/16" 4.8mm 7-25/64".7mm 31/32" 24.6mm 1-1/8" 28.6mm 1-1/2" 38.1mm A 1/4" 6.4mm 39/64" 15.5mm 51/64" 20.2mm 17/32" 13.5mm 9/16" 14.3mm 31/64" 12.3mm.260 SQ. BROACH (ON DIAMOND) "A" 1-5/8" 41.3mm 1-25/32" 45.2mm 2-1/4" 57.2mm 63/64" 25mm 6-3/8" 162mm 7/32" 5.6mm 6-27/32" 173.8mm HOW IS MEASURED: FLAT RADIUS BEVEL ARMORED FACEPLATE 1" X 6-7/8" FLAT RADIUS RADIUS W/ WEATHERSTRIP +1891W Jamb Preparation 5/32" R 4mm (4 PLCS) 11/16" 17.5mm 1/4" 6.4mm 5-3/8" 136.5mm 4-57/64" 124.2mm 5/8" 15.9mm MAXIMUM GAP 1/8" DOOR TO JAMB 3.2mm 1-17/64" 32.1mm 3-3/8" 85.7mm 1/16" 1.6mm 3/4" 19.1mm (COVERS ANY PREVIOUS CUTOUT FOR DEADBOLT) Latch/Lock, Cylinder & Paddle Installation 4-7/8" 123.8mm 6-57/64" 175mm 1 2 Stile Preparation Cutout same as 1850 Deadbolt plus holes for handle mount. THROW LOCKBOLT PUSH BACK LATCHBOLT 5/32" R 4mm (4 PLCS) 1-1/64" 25.8mm Latch Holdback Intructions 3 DIA. 1-19/32" 40.5mm 5-9/16" 1/16" 141.3mm 1.6mm 1-1/2" 38.1mm 3" 76.2mm 7/16" DIA. 11.1mm 2 PLACES: PADDLE: 17/64" DIA. 6.7mm LEVER: TAP OPERATE BOLT HOLDBACK LEVER WITH KEY, NAIL FILE OR SIMILAR TOOL UP TO HOLD BACK DOWN TO RELEASE LH BEVEL (LH) RH BEVEL (RH) HOW TO ORDER DEADLOCK/DEADLATCH Specify quantity and the following information. Order related products separately. PRODUCT NO. FACEPLATE STRIKE SHAPE/LIP LENGTH HANDING FINISH Flat 2 31/32" 01 Flat/Standard Jamb 5 LH or RHR 313 Dark Bronze Anodized 1 Radius 3 1-1/8" 02 Radius/Standard Stile 6 RH or LHR 335 Black Anodized 1W Radius with weatherstrip 4 1-1/2" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized 2 Bevel 21 Flat/Center Hung 4-1/2" Jamb XX Other Lip Lengths For door thickness other than 1-3/4", contact factory. RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately: Accessories Cylinders Trim Trim strikes, including 4505 armored strike Deadlock/Latch is operable by any standard 1-5/32" diameter mortise cylinder with cam. 4568, 4569 Lever trim and 4591 paddles. Electrified trim/operators are not available for the , Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.

23 1950 DEADLOCK DL Series Deadlock ALUMINUM GRADE 1 E5211 Specifications 31/32", 1-1/8", or 1-1/2" only. CASE Fully stainless steel case and internal components, measures 1" x 6" x depth. Depth varies by backset (see table on back of page). BOLT 5/8" x 1-3/8" x 2-7/8" with 1-3/8" throw. Eight-ply laminated stainless steel. Center ply has alumina-ceramic core to defeat any hacksaw attack, including rod-type super hacksaws. FACEPLATE Measures 1" x 6-7/8". The stainless steel 1950 Deadlock utilizes a laminated stainless steel bolt, activated by a pivot mechanism to provide maximum security for a single leaf narrow stile door. Function A huge bolt of laminated stainless steel, nearly three inches long, activated by an uncomplicated pivot mechanism, has made this basic Deadlock the standard of the narrow stile door industry. The length of this bolt provides maximum security for a single leaf door, even a very tall and flexible one or an installation where the gap between the door and jamb is greater than it should be. Operation 360 turn of key or thumbturn throws or retracts the counterbalanced bolt. Key can be removed only when bolt is in a positively locked or unlocked position. Lock accepts any standard 1-5/32" diameter mortise cylinder or thumbturn from either or both sides. Cylinder must have dimensioned cam. ARM-014-9/14 STRIKE See back page for dimensions of strike slot which can be cut in metal jamb. Trim plate, box strike, and armored strike are available separately. CAM 1950 Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with cam dimensioned as shown. Cylinders with cams can be readily obtained from most cylinder manufacturers. See S section for cylinder make, thumbturn DIMENSIONS and trim ring OF information. CAM TO OPERATE:.120" R 3.0mm.182" 4.6mm OPTIONS For jambs too narrow to accept the long bolt, the offers a shorter bolt with hook shape to provide equal security against door-prying attempts. Second and third point locking bolts are available for pairs of doors. All use any make mortise cylinder and thus can be keyed into systems with other types of doors. SCHOOLHOUSE version, also available, is modified so that operation from inside is unlock only. This lock is handed and must be specified LH or RH. Specify.850" Series ±.005" SCH mm ±.127mm Same faceplate and backset options as Series Operation from inside, with standard Adams Rite 4066 Thumbturn.620" or Rwith 4550 Deadlock Lever. 15.7mm.334" STANDARD PACKAGE 8.5mm Individually boxed with machine screws for mounting. Cylinders and/or thumbturns available separately. Shipping weight: 1-1/2 lbs. TRIM RING TR A Dim A.800" ±.005" 20.3mm ±.127mm DEADLOCK DEADLATCH EXIT DEVICES FLUSHBOLTS TRIM DIMENSIONS OF C TO OPERATE: 4070 DEAD THIS CAM AVAILABLE FROM ABOVE CYLINDE MANUFACTURERS ON SPECIAL ORDER (OR MAKE FROM STANDARD CAM) CYLIND DOOR STILE Narrow stile shoulder an hardened s B simply a len cylinder ma LOCK CASE Fax determined CAM S. 51st Street, Ste 102 FOR Phoenix, Arizona TR* = A + DOOR CENTERLINE