SIMATIC Software on server. Available softwares : STEP 7 Professional For applications development on the S7-300 and S7-400 PLC series.

Transcription

1 SIMATIC Software on server. The access to the software is free nevertheless, for protection reasons, it is restricted to the authorized users. To acquire the access rights you must be registered from a manager 1 of the users data base. Information required subscription NICE login name All software are on the dfs server in \\cern.ch\dfs\applications\siemens\simatic\ The installation can be done on two ways - by launching the concerned setup - from CMF if the application is deployed on the PC Available softwares : STEP 7 Professional For applications development on the S7-300 and S7-400 PLC series. Content of the STEP 7 professional package: STEP 7 basic S7-SCL S7-GRAPH S7-PLCSIM It is necessary to be declared in the administrator group My Computer Manage Local Users and Groups Groups Administrators The installation can be done from CMF or directly from the server. \\cern.ch\dfs\applications\siemens\simatic\step7pro Options during installation Choice of the languages: This option defined only the language for the first use; it could then be changed. Software suggested: Install all the software suggested except Acrobat Reader Interfaces \\cern.ch\dfs\applications\siemens\simatic\step7pro\cern\ucl

2 S7 Distributed Safety For safety applications development \\cern.ch\dfs\applications\siemens\simatic\distributed_safety \\cern.ch\dfs\applications\siemens\simatic\distributed_safety\cern\ucl CFC For creating automation programs by drawing a function chart. \\cern.ch\dfs\applications\siemens\simatic\cfc During installation, the setup propose 3 softwares : CFC, VXM et VT. Tic the CFC box; VXM and VT are optional. VXM : Version Cross Manager is a version comparison software. VT : Version Trail is an archiving software which need an additional license. \\cern.ch\dfs\applications\siemens\simatic\cfc\cern\ucl S7-HiGraph For graphic description of asynchronous processes using state charts. \\cern.ch\dfs\applications\siemens\simatic\higraph \\cern.ch\dfs\applications\siemens\simatic\higraph\cern\ucl

3 S7-PDIAG For configuration of process diagnostics with Simatic S7. \\cern.ch\dfs\applications\siemens\simatic\pdiag \\cern.ch\dfs\applications\siemens\simatic\pdiag\cern\ucl Modular PID Control For creating complex closed-loop control structures. Fonctions Blocks \\cern.ch\dfs\applications\siemens\simatic\optional_software\modular_pid\function_blocks Control Tool \\cern.ch\dfs\applications\siemens\simatic\optional_software\modular_pid\control_tool (For Control Tool only) \\cern.ch\dfs\applications\siemens\simatic\optional_software\modular_pid\control_tool\cern\ucl STEP 7 MicroWin For applications development on the S7-200 PLCs. \\cern.ch\dfs\applications\siemens\simatic\step7microwin Eventually, install also the service pack.

4 HMI SOFTWARE WinCC flexible \\cern.ch\dfs\applications\siemens\simatic\hmi_software\wincc_flexible - install the last version of WinCC flexible software do not install the license when the software ask to restart the computer - install the CERN license from the folder ATTENTION: Before you begin to install WinCC flexible, you must already have removed any installed previous versions (incl. any optional package). Reboot the computer and then install the last version of WinCC flexible. Autorisation Once the installation is finished, the authorization must be put. To do that, the setup must be launched from \\cern.ch\dfs\applications\siemens\simatic\hmi_software\wincc_flexible\cern\ucl Optional softwares : The Sm@rtAccess and Sm@artService options are available for evaluation. The users haave to bye themselves the licenses. These options are describe in the WinCC flexible presentation (in French) PROTOOL \\cern.ch\dfs\applications\siemens\simatic\hmi_software\protoolpro ProTool/Pro consist of two parts : ProTool CS is the configuration software Instructions for installation : Default user interface language is the language of the operating system (that s to say English). To install other languages, choose «Custom installation», select «User interface language» and «Change». You can now select the desired languages. ProTool RT is the «Runtime» software, it requires a license but it is not necessary for applications on Siemens operator panels. ProTool RT includes «Simulator», a useful software to test your applications without PLC nor panel operator. (Simulator does not require a license) Present version: V6.0+SP2. This version is an upgrade which which verify if a ProTool installation is on the PC. When the installation program ask for a previous version, use browse to show the way of \\cern.ch\dfs\applications\siemens\simatic\hmi_software\protoolpro\trace_of_v6.0_installed

5 SIMATIC NET up to V6.3 PC/PLC communication Interface through Ethernet and OPC Access path: \\cern.ch\dfs\applications\siemens\simatic\simaticnet Then select the folder of the chosen version and launch the Setup Simatic Net is a Run Time software which need a license. It works perfectly without a license but in this case, a window appear regularly to inform you that you don t have it. During installation, don t select any box in the window Install License The order number of the license is 6GK1704-1CW62-3AA0 From version V6.4 the software doesn t run anymore without authorization. 1 Users management: Jacky Brahy Enrique Blanco Vinuela EN/ICE/PLC jacky.brahy@cern.ch EN/ICE/PLC enrique.blanco@cern.ch