PMA MEDOC SHELLS USER S GUIDE
|
|
- Scarlett Hunt
- 7 years ago
- Views:
Transcription
1 1 PMA MEDOC SHELLS USER S GUIDE
2 2 1. FIELD OF USE The MEDOC ventilated applied cladding procedure is destined for use on flat, vertical walls (or at angle of no more than 15 from vertical) made of concrete or stonework, or on composite walls with metallic or wooden elements on new or renovated buildings with or without windows. This cladding technique enables the construction of walls of type XIII or XIV as specified in the General Conditions of Use of External Thermal Insulation Systems (CSTB specification manual N 1833 March 1983) and the support walls must meet the requirement of paragraph 4.2. of this document, given that air-tightness is provided by the supporting wall. MEDOC SHELLS applied cladding does not contribute to the general stability of the building not to the function of load transmission, sway-bracing, shock resistance and safety which all depend on the supporting wall. 2. ATTACHMENT TO THE REGULATIONS As well as the specific particularities of the MEDOC procedure as defined in the Specifications Manual, applied cladding must be built in accordance with the General Regulation in force in relation to such, and notably: cladding.. Snow and wind rules in force in terms of determining wind stress.. Professional rules applicable to the manufacture and use of metallic. General rules applicable to the design and deployment of the wooden frame and the thermal insulation of applied cladding (CSTB Specification N 2545 December 1991).. Technical Instruction N 249 relating to frontage walls.. Calculation on site of the maximum allowable load applicable to the mechanical fastening of applied cladding (CSTB Specification N 1661 July 1980). 3. TECHNICAL CHARATERISTICS Steel: Grade S 320 GD in accordance with P34-310
3 Thickness: 1.5 mm THD-PVDF-DUANAR XL Pre-lacquering in accordance with P Post-lacquering by POLYESTER powder coating on galvanized steel + primer Minimum thickness of 60 microns Thickness: 2 mm Post-lacquering by powder coating only. 3
4 4 Stainless Steel: Grade UGINOX 18.9E ML Standardized appellation: L Thickness 1.5 and 2 mm Mat, brushed or gloss finish (contact us for further details). Aluminium: Alloy grade 3003 Thickness 1.5 and 2 mm POLYESTER/PVDF Pre lacquering only (min. thickness 60 microns). Colors: Contact us for feasibility Pre-lacquered and nacreous steel: PAB color chart Powder-coated post-lacquered steel: RAL color chart Pre-lacquered aluminium: ALCAN color chart Post-lacquered aluminium: RAL color chart Particularities: The sheet thicknesses are defined in accordance with the dimensions of the shells and the technical requirements. Fastenings: invisible. 4. DESCRIPTION 4.1 Principle The MEDOC SHELLS are made of pre-lacquered, galvanized steel or stainless steel, fixed by the vertical edges then blocked in place using brackets. MEDOC SHELLS are characterized by their flat appearance and the fact that the fastening are not visible. The selected design is that of applied metallic cladding on a wall which is itself airtight and if necessary, of the wall (load-bearing wall). The definition of a wall includes reinforced concrete or stonework walls, as well as composite metal or wood walls. 4.2 Rails
5 5 These are made of extruded aluminium and are an integral part of the MEDOC system. They are delivered in a standard length of 6 meters and have sliding brackets into which the MEDOC SHELLS fit. The lateral parts of the rails are fixed onto the fastening lugs TG 30/10 using hex head bolts (diameter of 6) and rivets.
6 6 5. CORNER TRIMS MEDOC SHELLS are delivered as: 1. Pre-lacquered or Post-lacquered steel support, silicone-sprayed returns. 2. Pre-lacquered aluminium support, silicone-sprayed returns. 3. Post-lacquered aluminium support, silicone-sprayed or welded returns. 6. FIELD OF USE 6.1 Destination MEDOC SHELLS can be use for cladding the facades (vertical or sloping by a maximum of 15 from vertical) of public, private, industrial, commercial or dwelling buildings either new or renovated. In the pre-studies, particular attention should be paid to the following cases:. Building located in non-mainland France.. Façade that are higher than 10m above ground level. 6.2 Usages clauses MEDOC SHELLS must be use in accordance with the specification and requirement of the Professional Rules for the manufacture and installation of Metallic Cladding (2 nd edition, January1981). The purpose of these Specifications is to adapt and complement these Rules, bearing in mind the specificity of the products. MEDOC is designed for type XIII or XIV walls (CSTB specifications n 1833, March 1983) with ventilation airspace, according to the design and realizations of applied cladding on the façade in question. The type XIV wall implies suitable arrangements to ensure the water tightness of the various connections. 7. PARTICULAR ESTHETIC POINTS MEDOC SHELLS are designer for flat façade with or without vertical and/or horizontal indented joints. For this reason certain technical choices have been made with regard to product design. The sub frame rail on fastening lugs must be adjustable and perfectly aligned.
7 Particular provision: any alignment fault of the sub frame cannot be compensated for by the MEDOC SHELLS themselves. 7
8 8 8. CHOISE OF PRE-LACQUERED COATING IN ACCORDANCE WITH THE P STANDARD, OR OF THE GRADE OF STAINLESS STEEL For the MEDOC SHELLS manufactured with pre-lacquered galvanized steel, in reference to the exposure defined in annex B of the standard P34 301, the following table defines the choices of coatings used: steel support, polyester support 25 microns, THD Polyester microns, PVDF 25 microns DURANAR XL 50 to 60 microns. COATING SYSTEM Metallic Z 225 or Z275 Organic Reverse band 5-7µm Rural non polluted External atmospheres Industrial or urban Normal sever e km km Marine Shore <3km Mixed Particular Healthy atmosphere Relative humidity Low Average Aggressive atmosphere O X _ Super 25µm O O X O O X O O X THD 35µm O O X O O O X X O O X PVDF 25µm O O X O O X X X O O X GALVA Duranar XL 50 to 60 µm O O X O O O X X O O X O coatings adapted to the exposure X Coatings the final choice and particular characteristics of which must be decided after consultation with and agreement by PMA _Non recommended coatings For the MEDOC SHELLS made of stainless steel, the following table defines the choice of grades according to exposures, in reference to annex B1 of DTU Grade of stainless steel Rural non polluted Atmospheric exposures External atmospheres Urban or industrial Marine normal severe <10 km <3 km Mixed of Particular Interior atmospheres Healthy Damp Aggressive and dry Z6CN18.09 O O X X O O X Z3 CND O O X O O X O O O O the grades of stainless steel adapted to the exposure
9 9 X the grades of stainless steel the final choice of which and the characteristics of which must be decided after consultation with and agreement by PMA. _ the grades not recommended. 9. THERMAL INSULATION MEDOC SHEELS have no particular thermal insulation function. If this insulation is required, it is generally ensured by semi-rigid panels or rolls of mineral wool placed beneath or between the rails leaving a ventilation airspace. In all cases, the steam-proofing function must be ensured on the warms side of the wall. On the MEDOC cladding side, a ventilation airspace of at least 2cm must be made. The insulating material must never be compressed, or esthetic problems may occur; the insulating material must no be pinched between the MEDOC SHELLS bearing frame. 10. FIRE GRADING The fire grading of the MEDOC SHELLS is M TRIMMINGS Trimmings: pre-lacquered or stainless steel parts shaped on a folding-press and made of identical materials to the other parts.. Initial lower shells. Protruding corner shells. Retracting corner shells. Acroter cover shells. Window support parts. Parts under return face. Trimmings for opening table All these parts are made on request within manufacturing limits and are subject to an individual case-by-case study.
10 FASTENINGS (not supplied) MEDOC SHELLS have hidden fastenings. Concerning anti-rust protection, the fastenings must comply with the requirements of the professional rules for metallic cladding. 13. PACKAGING AND TRANSPORT 13.1 Protective film A peel-off protective film is applied to the visible face of the pre-lacquered MEDOC SHELLS. This film must be removed within 2 weeks.
11 Labelling A delivery note is affixed to each package, specifying:. customer order reference. bath reference. customer name. product type. cladding thickness. load content (number and length). grade reference of pre-lacquered steel This note is accompanied by a second note with handling and storage instructions Packing MEDOC SHELLS are packed on the manufacturing line. Packing consists in:. Latticed wooden case. Upper, lower and intermediate cardboard protection. Vertical storage of the shells. Retractable anti-uv surrounding film. Wooden transversal banding 13.4 Transport MEDOC SHELLS and their accessories must be transported in conditions which preserve the integrity of their characteristics (packages carefully wedged and strapped, trucks covered). 14. INSTALLATION
12 Organization The pre-studies carried out on the façade are not the responsibility of PMA or the distributing companies. PMA does not install MEDOC SHELLS. The installation of MEDOC SHELLS must be performed by companies with the required professional qualifications Unloading and handling Handling operations must be carried out with the particularities of the MEDOC SHELLS in mind. 15. EXTERNAL MAINTENANCE The metallic facades must be maintained in compliance with the requirement of the Professional Rules for Metallic Cladding (article , external maintenance). Owing to their flatness, the MEDOC SHELLS cladding is self-cleaning; however, if needs be, they can be cleaned periodically using a gentle detergent (non-bleach) following by a rinse with water. Maintenance consists in: The removal of various vegetation (moss, for example) and of any incompatible matter which may have been deposited on the surface of the cladding. The immediate repair of any localized degradation, such as incipient corrosion caused, for instance, by the stagnation or impact of foreign bodies.
PROPOSED SPECIFICATION FOR ALUCOBOND PLUS Aluminium Composite Panel Cladding System Fixed Watertight Cassette Panel System - 4mm thick
1. SCOPE OF WORK The scope of work includes the design, supply fabrication and installation of Alucobond PLUS aluminium composite panel cladding, complete with all necessary sub-structures, anchors, hardware
More informationSchlüter -KERDI-BOARD Substrate, structural panel, bonded waterproofing
Substrate, structural panel, bonded waterproofing The universal substrate for tiles Perfect covering No matter whether you work with mosaics or large format tiles, an absolutely level substrate with straight
More informationCERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011
CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS
More information1.2.1 1.1.8 PRODUCTBLADEN GT ROCKPANEL STRUCTURE
1..1 1.1.8 PRODUCTBLADEN SHEETS GT page 1 to 6 Rockpanel Structure is a very durable panel with a lightly textured finish, specially developed for use in cladding, fascia, soffit applications. The basic
More informationColonnade Security Pipe
Description: Round & Square downpipe formed from extruded 6060 T4 aluminium in various sizes (Ø83mm, Ø108mm, 83x83 mm & 108x108mm*) & supplied with a complete range of accessories i.e. Offsets, bends,
More informationPART 1 GENERAL 1.1 SECTION INCLUDES
J-1 Section 09110 Long Form Specification INTERIOR METAL STUD FRAMING This section includes lightweight, usually 0.036 inch (0.9 mm) thick or lighter, non-axial load bearing metal stud framing including
More informationSECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2
More informationProduct Data Sheet ROCKPANEL Rockclad
Product Data Sheet ROCKPANEL Rockclad Durable - Xtreme - FS-Xtra United Kingdom 1 Product description ROCKPANEL boards are prefabricated compressed mineral wool boards with synthetic binders. The surface
More informationSTAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM
STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM Installed in Pre-engineered Steel Buildings Provides Lowest Cost Construction Method for CORROSIVE AND WET Environments PREFERRED SOLUTIONS, INC.
More informationStorage Store the siding in a dry and ventilated area. Do not place it directly on the ground. Always cover the siding after a day s work.
Installation Guide Before you begin, take the time to read this entire guide to clearly understand the requirements and steps to follow for proper installation. Warning Do not install defective material.
More informationSECTION 08 5656 GUARDA SECURITY WINDOW SCREENS
Page 1 of 5 SECTION 08 5656 GUARDA SECURITY WINDOW SCREENS Guarda Security Window Screens in this specification are appropriate for use in windows, storefronts, curtain walls, vents, and any other applications
More informationSTRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM
Chapter 9 STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM 9.1 BACKGROUND Steel is widely used in the construction of multi-storey buildings. However, steel construction is seldom used and is traditionally
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationServices Enclosures and Protected Shafts - Maintaining Compartmentation
Introduction When a fire resisting element is used to provide fire compartmentation, every opening that allows services to pass through the element must be adequately protected by sealing, or fire stopping
More informationCardok Sàrl CP37 CH-1295 Tannay Switzerland Phone: 0041 22 77 66 051 info@cardok.com
CARDOK CARLIFT Fast access to underground garages Fast, Silent, Discreet, Design, High-Tech Installation to replace an access ramp on private property Dimensions: (Built to measure, all dimensions can
More informationWindows, French doors, folding windows, terrace doors SFB 1074 with low U-values
Windows, French doors, folding windows, terrace doors SFB 1074 with low U-values SFB 1074 is available in two versions. In the first version the profiles are insulated with 30 mm glass fibre reinforced
More informationI-Line - Snap-On Feature
Oct 2012 I-Line - Snap-On Feature DATA SHEET Snap-On features - Guaranteed truelines every time Bailey I-Line Snap-On is an architectural cladding feature offering creative possibilities for architects
More informationRESIDENTIAL ROOFING & RE-ROOFING, ROOF VENTILATION AND ROOF SHEATHING REQUIREMENTS MICHIGAN RESIDENTIAL CODE 2000
RESIDENTIAL ROOFING & RE-ROOFING, ROOF VENTILATION AND ROOF SHEATHING REQUIREMENTS MICHIGAN RESIDENTIAL CODE 2000 SECTION R905 REQUIREMENTS FOR ROOF COVERINGS R905.1 Roof covering application. Roof coverings
More information- - - - Steel Panel Frame. Exterior Steel Sheeting. Optional Rigid Insulation. Optional Steel Insulation Liner
The Kelly Klosure pre-framed modular panel has 4 components that are factory finished to create an easy and versatile bolt-together system in the field. Steel Panel Frame Exterior Steel Sheeting Optional
More informationSECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word
More informationConfort 26. Sliding Systems. Sapa Building System
Confort 26 Sliding Systems Sapa Building System Confort 26 is Sapa s thermally insulated sliding system for windows and doors. Available as two- and three-rail solution. Among its features, there are
More informationV-joint fascia soffit systems
V-joint fascia systems CI/SfB October 2005 (4-) Uniclass L5294 extruded aluminium system with complete versatility for eaves and other building features Bailey V-Joint and fascia system has been designed
More informationPlaisance 24. Sliding Systems. Sapa Building System
Plaisance 24 Sliding Systems Sapa Building System Plaisance 24 is Sapa s noninsulated sliding system for windows and doors. Available as one-, two-, three- and fourrail solution. Among its features, there
More informationA. Work on this project shall consist of, but is not limited to, the following:
PART 1 - GENERAL CLEANING AND RESTORATION OF SECTION 05900-1 1.1 SUMMARY A. Work on this project shall consist of, but is not limited to, the following: 1. Clean and treat all exposed anodized architectural
More informationArmanet BEKAERT. Armanet THE CONSTRUCTIVE IDEA. Render & plaster reinforcing mesh @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@
BEKAERT Armanet THE CONSTRUCTIVE IDEA Armanet Render & plaster reinforcing mesh Armanet Renovation Product specification Insulation Reinforcing Mesh Armanet is a heavily galvanized welded mesh used for
More informationLaying the First Course. 1. Excavate the site and construct the footing.
Use QUIKRETE Mortar Mix or Mason Mix lay up a concrete block wall as shown. QUIKRETE Mortar Mix or Mason Mix Concrete block Mason's line Line blocks 4' level brick trowel Jointer Mason's hammer Stiff brush
More informationRockwool Cladding Roll
Rockwool Cladding Roll High performance industrial insulation has been specifically developed for use in lightweight cladding applications to commercial or industrial framed buildings. Cladding Roll U/F
More informationFLASHMAN WINDOW AND DOOR FLASHING SYSTEM. Product. Scope. Appraisal No. 573 [2013]
FLASHMAN WINDOW AND DOOR FLASHING SYSTEM This Appraisal replaces BRANZ Appraisal No. 573 (2007). Amended 05 February 2016. BRANZ Appraisals Technical Assessments of products for building and construction.
More informationDubai Municipality Standard DMS 1: Part 5: 2004
Specification for precast concrete blocks Part 5: Normal-weight concrete-polystyrene sandwich masonry blocks Issue Date Revision Revision Description Prepared by Approved by Authorized by 19/12/2004 Issue
More information00MK-MA0190-EN00. Mounting System ASSEMBLY INSTRUCTIONS. Universal Light system with locking brackets, for sloped roof
00MK-MA0190-EN00 Mounting System ASSEMBLY INSTRUCTIONS Universal Light system with locking brackets, for sloped roof Rev.02 November 2014 Table of contents General instructions 2 General safety instructions
More information12.1 Schlüter -KERDI-BOARD
I n n o v a t i v e p r o f i l e s 12.1 Schlüter -KERDI-BOARD S u b s t r a t e U N I V E R S A L S T R U C T U R A L P A N E L, B O N D E D W A T E R P R O O F I N G Application and Function Schlüter
More informationSolar Mounting System
Xiamen Antai New Energy Tech.Co., Ltd Installation Manual Antai Rail Solar Mounting System (Flat Roof Solution) Version 1.1 Office Add: 508#, North Tower, Guangxia Building Huli Torch Hi-tech Zone, Xiamen,
More informationSECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE
SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More information09/07/07 GLASSFIBER REINFORCED CEMENT (GRC) C. S. I. Spec 03500 Master Spec. 03 49 00 Page 1
C. S. I. Spec 03500 Page 1 PART 1 - GENERAL 1.01 SUMMARY:.01 Provide special glassfiber reinforced cement (GRC) shapes in accordance with the requirements of the contract documents..02 The installing contractor
More informationORAY PREFABRICATED GSM SHELTER CONTAINERS TECHNICAL SPECIFICATIONS
GSM SHELTER CONTAINERS TECHNICAL SPECIFICATIONS ~GSM SHELTER CONTAINERS ARE PROCUDED ACCORDING TO THE DEMANDED SIZE.~ (W x L x H) Page1 GENERAL FEAUTURES Environmental Conditions : Maximum outdoor temperature
More informationSapa: SECTION 05520 ARCHITECTURAL ALUMINUM HANDRAILS AND RAILINGS
PART 1 GENERAL Sapa: SECTION 05520 ARCHITECTURAL ALUMINUM HANDRAILS AND RAILINGS 1.1 SECTION INCLUDES A. Aluminum and Glass Handrails B. Aluminum Railings 1.2 RELATED SECTIONS A. Section 05700 - Ornamental
More informationAsphalt Shingle Application Requirements
Alberta Allied Roofing Association Asphalt Shingle Application Requirements Section 1 Roof Decks 1.1 General Asphalt Shingles are not permitted to be installed directly over rigid insulation. When Asphalt
More informationCHAT BOARD. Danish Design Made in Denmark PRODUCT SHEETS
CHAT BOARD Danish Design Made in Denmark PRODUCT SHEETS Classic CHAT BOARD Classic is a magnetic glass- and writing board for use in modern offices and private homes. CHAT BOARD Classic is Danish Design
More informationSIMPLE SAVER SYSTEM DESIGN MANUAL
SECTION 5: BAR JOIST CONSTRUCTION DETAILS SIMPLE SAVER SYSTEM DESIGN MANUAL Call Toll-free: 1-800-255-0776 Fax: 1-402-454-2708 E-mail us at: custserv@thermaldesign.com SIMPLE SAVER SYSTEM DESIGN MANUAL
More informationBOQ SPECIFICATIONS. The Blind system consist of a coated aluminium tube of 38 mm diameter with provision of fabric clamping.
BOQ SPECIFICATIONS VERTICAL BLINDS Vertical Blinds made of glass fibre fabrics in width 5 (or 4 ). Minimum overlapping of ¾ in fabric. Top aluminium anodized rail of 1.4 mm thickness. 2 inch wide channel
More informationDock Hardware & Accessory Products Catalog
Dock Hardware & Accessory Products Catalog Product Page # Product Page # Angle Brackets/Clips 8 Back Up Plate 5 Backing Plate/Hurricane Stop 10 Carriage Bolt Sets 4 Chain Retainer 10 Connector Pin Set
More informationSECTION 07400 STANDING SEAM METAL ROOF
SECTION 07400 STANDING SEAM METAL ROOF PART 1 - GENERAL 1.01 SECTION INCLUDES A. Work described in this section includes pre-formed standing seam metal roofing system complete with clips, perimeter and
More informationTECHNISCHE FICHE - TECHNISCHE FICHE - Chat Board: Classic
- TECHNISCHE FICHE - Chat Board: Classic Classic is a magnetic glass- and writing board for use in modern offices and private homes. CHATBOARD Classic is Danish Design - made in Denmark. Classic is a glass
More informationSL30-ISO PROFILE SYSTEM
AESTHETICS AND sustainability SL30-ISO PROFILE SYSTEM TECHNICAL DOCuMENTATION WWW.MHB.NL SL30-ISO PROFILE SYSTEM 1. SL30-ISO and SL30-ISO-PLUS Sustainability is getting worldwide more and more the attention
More informationBSF and BCC beam connections
No. 2512 Norwegian member of European Organisation for Technical Approvals, EOTA, and European Union of Agrément, UEAtc Issued: 11.09.2007 Revised: Valid until: 11.09.2012 Page: 1 of 5 BSF and BCC beam
More informationDENVER MODEL 30 X 30 SPECIFICATIONS
DENVER MODEL 30 X 30 SPECIFICATIONS Dimensions: Roof Dimensions 30-0 x 30-0 (4) Columns (Center to Center) 25-6½ x 25-6½ Minimum Clearance 8-0 Roof Height @ Peak Dependent on Col. Ht. Hip Roof 4:12 pitch
More informationRPV - RP - RA air handling units
APPLICATIONS Heating, ventilation, cooling >> FACTORIES >> WAREHOUSES >> HALLS >> DISTRIBUTION CENTRES >> COMMERCIAL PREMISES >> PLACES OF WORSHIP RPV - RP - RA air handling units www.reznor.eu RPV - RP
More informationOwner's Manual & Assembly Instructions
Owner's Manual & Assembly Instructions PM01 BASE KIT Model No. FDN1014 717090311 CAUTION: SOME PARTS HAVE SHARP EDGES. CARE MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES TO AVOID A MISHAP. FOR SAFETY
More informationENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES
ENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES PART 1 - GENERAL 1.1 SCOPE OF WORK SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED SQUARE TUBE LADDER
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationFLASHCLAD VERTICAL WEATHERBOARD CAVITY SYSTEM. Product. Scope. Appraisal No. 829 [2013] Appraisal No. 829 (2013) Amended 05 February 2016
WEATHERBOARD CAVITY SYSTEM Amended 05 February 2016 BRANZ Appraisals Technical Assessments of products for building and construction. Flashclad Limited PO Box 346 Kaiapoi 7633 North Canterbury Tel: 0800
More informationPreformed Metal Roofing and Siding
Page -1-1. GENERAL 1.1. Description This specification along with the drawings covers the furnishing of all material, products, equipment, accessories, tools, services, transportation, labor and supervision
More informationAA Solar and Sun Power Plus
AA Solar and Sun Power Plus www.aasolar.co.nz www.sunpowerplus.co.nz -1- Contents Chapter Title Page 1 General information 3 2 Safety and Installer Responsibilities 4 3 Technical Specifications 5 4 Tools
More informationHORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
More informationCLEAR-DIVISIONS CENTERFOLD
CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in
More informationTASTECH SERVICES LTD. Manufacturer and Supplier of Equipment and Daily Living Aides to Hospitals, Resthomes, OT s and the General Public
TASTECH SERVICES LTD Manufacturer and Supplier of Equipment and Daily Living Aides to Hospitals, Resthomes, OT s and the General Public Issue One Phone (03) 343 2122 e.mail: info@tastechservices.co.nz
More informationRAUFOSS EXPLOSIVE COMPRESSION FITTINGS
INSTRUCTION MANUAL FOR RAUFOSS EXPLOSIVE COMPRESSION FITTINGS Box 7 2831 Raufoss Norway Tlf.: +47 61 15 17 87 Fax: +47 61 15 25 56 25 January 2013, rev 2 Available on www.vpmetall.no Page 1 CONTENTS GENERAL
More information!!!!!! !!! Decra Plus DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 DPSW016 DPSW020 DPSW021 DPSW024 DPSW030 DPSW031 DPSW035 DPSW030 DPSW031 DPSW035
Decra Plus Drawing no DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 Description Shown In Decra Brochure Most Commonly Used Detail t~êã=oççñ=b~îéë=aéí~áä=b~îéë=lîéêü~åö=táíü=fåëìä~íéç=c~ëåá~=~åç=pçññáí
More informationINSTALLATION. General. Important Note. Design. Transport
General The roof trusses you are about to install have been manufactured to precise engineering standards. To ensure that the trusses perform as designed, it is essential that they be handled, erected
More informationInstallation Detailed installation instructions are provided which should be strictly followed.
Specification System 6 The Metal Technology Thermally-Broken Vertical Slide Window has been designed in such a way that its'attractive and clean lines will enhance all types of residential and commercial
More informationRef: GA13UK Glass Awning Support System
Ref: GA13UK Glass Awning Support System Give any entrance an uncomplicated, graceful look, enhancing the design of any building. Installation LAMINATED TOUGHENED GLASS High grade 316 stainless steel for
More informationFIREPROOF Panels Trimoterm
FIREPROOF Panels Trimoterm FIREPROOF Panels Trimoterm Fireproof panels Trimoterm FTV and SNV are particularly convenient for constructing, where very high demands of fire resistance, sound reduction and
More informationE. INTERNAL PACKAGING
ANTI-CRRSIN MEASURES E. INTERNAL PACKAGING 1. ANTI-CRRSIN MEASURES During transport, handling and storage especially during overseas shipping more intensive stresses occur, which are often not sufficiently
More informationFinal inspections are completed by site visit only. Access to fenced yards shall be planned.
ROOFING RESIDENTIAL BUILDING INSPECTIONS DEPARTMENT www.ci.blaine.mn.us This handout is intended only as a guide and is based in part on the 2015 Minnesota State Building Code, Blaine City ordinances,
More informationSpecifications. Preformed Metal Wall and Roof Panels. Alcoa Cladding Systems Manufacturing Plant 100 Industrial Boulevard Eastman, Georgia 31023
Specifications Preformed Metal Wall and Roof Panels Alcoa Cladding Systems Manufacturing Plant 100 Industrial Boulevard Eastman, Georgia 31023 Section 07410 Preformed Metal Wall and Roof Panels Structural
More informationSECTION 07 61 13 STANDING SEAM METAL ROOFING
SECTION 07 61 13 STANDING SEAM METAL ROOFING PART 1 GENERAL 1.01 SCOPE OF WORK A. The Work shall include all labor, materials, equipment and supervision required to complete the work of the above referenced
More informationK2 STONE NATURAL VENEER
INTRODUCTION WHAT IS K2 NATURAL THINSTONE VENEER? Natural K2 Stone veneer is real stone, cut 1 inch thick, making it light enough to be installed as a veneer. Sometimes referred to as thin veneer, thin
More informationSECTION 05 7360 ALUMINUM HANDRAIL AND RAILING SYSTEMS WITH DECORATIVE METAL PANEL INFILLS
1 SECTION 05 7360 ALUMINUM HANDRAIL AND RAILING SYSTEMS WITH DECORATIVE METAL PANEL INFILLS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and
More informationChelsea Loft Bed WARNING:
Chelsea Loft Bed WARNING: Failure to follow these warnings and assembly instructions could result in serious injury or death. Read all instructions before assembling bunk bed. KEEP INSTRUCTIONS FOR FUTURE
More informationSECTION 07720 PREFORMED METAL STANDING SEAM ROOFING
SECTION 07720 PREFORMED METAL STANDING SEAM ROOFING PART ONE GENERAL DESCRIPTION This section includes pre-formed standing seam metal roofing and related flashings, closures, trim and accessories including,
More informationCOLORADO MODEL. 35 x 65 SPECIFICATIONS
COLORADO MODEL 35 x 65 SPECIFICATIONS Dimensions: Roof Dimensions 35-0 x 65-0 Column Dimensions (center to center) 31-0 x 30-6 Minimum Clearance 14-0 Roof Height @ Peak ±18-8 Curved Roof ±42-6 radius Square
More informationInsulated Roof & Wall Panels. Product Data Sheet. Trapezoidal Insulated Roof Panels KS1000 RW
Insulated Roof & Wall Panels Trapezoidal Insulated Roof Panels KS1000 RW Overview Kingspan roof panel systems present a superior system compared to conventional multi-part site assembled systems. They
More informationCity of San Diego, CWP Guidelines
PART 1 -- GENERAL SECTION 08520-1.1 WORK OF THIS SECTION City of San Diego, CWP Guidelines A. The WORK of this Section includes providing aluminum windows with frames, bracing, glazing attachments, screens,
More informationConcepts. Products. Service. Lindner Plus Organisation
Concepts Products Service Lindner Plus Organisation Building new solutions. Lindner undertakes major worldwide projects in all areas of interior finishes, insulation technology, industrial services and
More informationRoof Curbs, Extensions and Equipment Supports
Roof s, Extensions and Equipment Supports December 2012 Roof Page s, Header Extensions and Equipment Supports Table of Contents Model GPI Standard and Optional Construction Features... 3 Model Number Code....
More informationSPECIFICATION Aluminum Module Frames. Allowed anodization before fabrication for clear frames.
SPECIFICATION Allowed anodization before fabrication for clear frames. Page 2 of 9 1. SCOPE 1.1. This document provides general requirements for aluminum frames used in the assembly of photovoltaic modules.
More informationCannon T4 Modular Data Centres. For Outside Deployment & Challenging Environments
Cannon T4 Modular Data Centres For Outside Deployment & Challenging Environments A high performance, full specification Data Centre, up to Tier 4* resilience, instantly deployable A highly secure Data
More information7. Installation. installation 7.1.1. CAST-IN WINDOW SYSTEM 7.1. INSTALLATION OF WINDOW MAIN FRAME
7. Installation Window involves the fixing of window frame at an earlier construction stage and subsequent of the window sashes. This is a highly workmanship dependent process. Only trained and approved
More informationWeather Resistant Louvres
L---e Weather Resistant Louvres Type WSL Untreated aluminium Contents Application Realisation Safety instructions Contents Application Realisation Safety instructions Dimensions Sizes Installation Accessories
More informationPOST AND FRAME STRUCTURES (Pole Barns)
POST AND FRAME STRUCTURES (Pole Barns) Post and frame structures. The following requirements serve as minimum standards for post and frame structures within all of the following structural limitations:
More informationSSG PRODUCTS FOR SHIPS AND OFFSHORE
6.1 SSG PRODUCTS FOR SHIPS AND OFFSHORE SSG workshop cabinets, tables and shelving system specially adapted to be used on-board ships and offshore. Developed in close cooperation with users from these
More informationThe compliance of a roof to part of a new house at 28D Rata Street, Oxford, Waimakariri
Determination 2009/103 The compliance of a roof to part of a new house at 28D Rata Street, Oxford, Waimakariri 1. The matters to be determined 1.1 This is a determination under Part 3 Subpart 1 of the
More informationFaçade panels for interior cladding on a wooden supporting structure
1 General These application instructions are specifically intended for the fastening of EURO PANELS OVERSEAS N.V. façade panels as decorative interior wall cladding on a wooden supporting structure. A
More informationResidential Deck Safety, Construction, and Repair
Juneau Permit Center, 4 th Floor Marine View Center, (907)586-0770 This handout is designed to help you build your deck to comply with the 2006 International Residential Building code as modified by the
More informationHigh-speed folding doors. F Series
High-speed folding doors F Series 02 F Series The horizontal folding motion of high-speed folding doors ensures that the entire vertical clearance is achieved immediately. F Series doors open at high speed
More informationMaster Panel 1000 R5 Roof
Master Panel 1000 R5 Roof Product Description The important feature of the roof elements are the easy installation procedure. The element fix exactly and pushed together without much force. Roof coverage
More informationMezzanine. Technical manual
TechNICAL MANUAL 1 Mezzanine Technical manual 2 Varnished (optional) Product class P6 Melamined (optional) Tongue and groove Structural applications STANDARD FEATURE additional options - Chipboard - Varnished
More informationTHE STAINLESS CONSOLE SYSTEM. AGS Sp. z o.o. KNOW HOW IN VENTILATED FACEDES OF MODERN BUILDING
THE STAINLESS CONSOLE SYSTEM AGS Sp. z o.o. KNOW HOW IN VENTILATED FACEDES OF MODERN BUILDING The standard resolutions of ventilated facade system that are avialable on the market contain: aluminium sub-constructions
More informationIsover HVAC Application Handbook Installing fire protection insulation to metal ductwork
Isover HVAC Application Handbook Installing fire protection insulation to metal ductwork HVAC - Fire protection of metal ductwork Fire protection Thermal insulation Isover ULTIMATE TM Protect - Fire protection
More informationWindow Installation Instructions
Caution The correct installation methods of windows in full frame or insert applications is critical towards achieving the tested performance of the window and longterm enjoyment and energy savings for
More informationProfiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
More informationHoesch Matrix System individuell. ThyssenKrupp Steel Europe Thinking the future of steel
Hoesch Matrix System individuell ThyssenKrupp Steel Europe Thinking the future of steel 2 3 Steel in perfect shape and precision Steel the material of contemporary architecture. Throughout the production
More informationAluminium foil properties: Applications of aluminium foils and thin gauge strips in thickness below 0,50 mm:
1 ALUMINIUM FOILS AND THIN GAUGE STRIPS The year 2010 has been celebrated as the 100th anniversary of aluminium foil. Ever since the beginning in 1910 the usage of foil has been growing and products developed
More informationSECTION 08 41 1 ALUMINUM FRAMED ENTRANCES and STOREFRONTS. System 402 Flush-Glazed Screw Spline Storefront
PART 1 GENERAL 1.01 Work Included SECTION 08 41 1 ALUMINUM FRAMED ENTRANCES and STOREFRONTS System 402 Flush-Glazed Screw Spline Storefront A. Furnish and install aluminum architectural storefront system
More informationK17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
More informationH-Stud Area Separation Wall System
12 TH EDITION 09 21 16.33/NGC H-Stud Area Separation Wall System 09 21 16.33 139 H-STUD AREA SEPARATION WALL SYSTEM The fire-protection of gypsum-based Area Separation Walls is demonstrated in dramatic
More informationCLEAR-DIVISIONS VARIOFOLD
CLEAR-DIVISIONS VARIOFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOFOLD moveable The yellow highlighted areas in the
More informationSchluter -KERDI-BOARD Substrate, building panel, bonded waterproofing
Schluter -KERDI-BOARD Substrate, building panel, bonded waterproofing Schluter -KERDI-BOARD The universal substrate for tiles Flat. Level. Plumb. Square. No matter the quality, cost, or extravagance of
More informationCATALOGO PRODOTTI PORTONI INDUSTRIALI COIBENTATI
CATALOGO PRODOTTI PORTONI INDUSTRIALI COIBENTATI The Company Founded in 1973 by Mr Imes Tinti in association with his son Vanni Tinti. In 1999 the locksmith workshop became a modern industrial company
More information