European Technical Approval ETA 12/0419

Size: px
Start display at page:

Download "European Technical Approval ETA 12/0419"

Transcription

1 FM Approvals Limited 1 Windsor Dials Windsor Berkshire SL4 1RS United Kingdom Tel.: +44 (0) Fax: +44 (0) cpd@fmapprovals.com Internet: Member of EOTA European Technical Approval ETA 12/0419 Trade name: Holder of approval: Website: Generic type and use of construction product: Firestone UltraPly TPO Firestone Building Products Europe Ikaroslaan 75 B-1930 Zaventem Belgium Systems of mechanically fastened flexible roof waterproofing membranes Valid from: to: 21 October October 2017 Manufacturing plant: Firestone Building Products Wellford South Carolina SC USA This European Technical Approval contains: 18 pages including 04 Annexes which form an integral part of the document European Organisation for Technical Approvals

2 European Technical Approval No. 12/0419 Page 2 of 18 I LEGAL BASES AND GENERAL CONDITIONS 1 This European Technical Approval is issued by FM Approvals Limited in accordance with: - Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of Member States relating to construction products 1, modified by the Council Directive 93/68/EEC 2 and Regulation (EC) Nº 1882/2003 of the European Parliament and of the Council 3 - UK implementation of CPD statutory instruments 1991, No The Building and Building Construction Products Regulations 1991 made 15 July 1991, laid before Parliament 22 July 1991, coming into force 27 December 1991, and amended by the Construction Products (Amendment) Regulations 1994 (Statutory Instruments 1994, No. 3051). -Common Procedural Rules for Requesting, Preparing and the Granting of European technical approvals set out in the Annex of Commission Decision 94/23/EC 4. -ETA Guideline No. 006 edition March 2000, as amended April 2007, for systems of mechanically fastened flexible roof waterproofing membranes. 2 FM Approvals Limited is authorised to check whether the provisions of this European Technical Approval are met. Checking may take place in the manufacturing plant(s). Nevertheless, the responsibility for the conformity of the products to the European Technical Approval and for their fitness for the intended use remains with the holder of the European Technical Approval. 3 This European Technical Approval is not to be transferred to manufacturers or agents of manufacturers other than those indicated on page 1 of this European Technical Approval. 4 This European Technical Approval may be withdrawn by FM Approvals Limited in particular pursuant to information by the Commission according to Article 5(1) of Council Directive 89/106/EEC. 5 Reproduction of this European Technical Approval including transmission by electronic means shall be in full. However, partial reproduction can be made with the written consent of FM Approvals Limited. In this case partial reproduction has to be designated as such. Texts and drawings of advertising brochures shall not contradict or misuse the European Technical Approval. 6 The European Technical Approval is issued by the approval body in its official language. This version corresponds fully to the version circulated in EOTA. Translations into other languages have to be designated as such. 1 Official Journal of the European Communities N L40, , p Official Journal of the European Communities N L 220, , p. 1 3 Official Journal of the European Union N L 284, , p Official Journal of the European Communities N L17, , p. 34

3 European Technical Approval No. 12/0419 Page 3 of 18 II SPECIFIC CONDITIONS OF THE EUROPEAN TECHNICAL APPROVAL 1 Definition of the product and intended use 1.1 Definition of the construction product/kit General The systems of mechanically fastened flexible roof waterproofing kits Firestone UltraPly TPO covered by this ETA consist of single ply flexible thermoplastic polyolefin (FPO) membranes, Firestone UltraPly TPO, used in combination with specific mechanical fasteners, as identified in this ETA. The membranes and fasteners for relevant combinations may be obtained in separate transactions and the finished system assembled on site. The waterproofing membranes and the mechanical fasteners are the components of the kit which in combination form the systems covered by this ETA. Any insulation material incorporated into the system is not part of the kit. Throughout this European Technical Approval, other than for product names, the convention is always to give metric units first (together with any applicable tolerances), followed when relevant by imperial units shown in brackets Waterproofing membranes The Firestone UltraPly TPO waterproofing membranes are reinforced membranes manufactured from a woven polyester reinforcement sandwiched between two layers of thermoplastic polyolefin. The membranes are produced by an extrusion/lamination process and are CE-marked in accordance with EN The waterproofing sheets are delivered in rolls with a typical length of 30.5 meters (100 feet). The waterproofing sheets are available in various widths. Firestone UltraPly TPO is available in 4 nominal thicknesses of 1.1mm, 1.2mm, 1.5mm and 1.8mm. The top surface can be white, light grey or tan in colour. Characteristics of the membranes appear in Table 1 below and related performance characteristics are given in Annex 1. Table 1 Thickness (mm) (-5%, +10%) Mass/unit area (g/m 2 ) (-5%, +10%) Roll Length (m) (-0%, +5%) Width (m) (-0%, +5%) Colour Firestone UltraPly TPO and , 1.5 and , 1.5, 2.0, and , 1.5 and 2.0 White, light grey or tan top surface on dark grey bottom surface.

4 European Technical Approval No. 12/0419 Page 4 of Mechanical fasteners and substrate Mechanical fasteners for use with profiled steel deck which fall within the scope of the investigation for this European Technical Approval are shown in Table 2 below: Table 2 Fastener Plate Supporting ETA in accordance with ETAG 006* Firestone All-Purpose (AP) fastener Firestone HD seam plate 12/0419 SFS Intec IR2 4.8xL SFS Intec IR 82x40 08/0262 SFS Intec ISO-TAK BS 48 EJOT Dabo TKR-4.8 SFS Intec ISO-TAK Twin Peak Plus (TPP) EJOT HTK 50 06/0170 and 08/ /0013 *The supporting ETA s referred to in Table 2 above must remain valid in order for this ETA 12/0419 to also remain valid. Further relevant fastener geometry (with tolerances), properties and performance are contained either in Annex 2 of this ETA or within the relevant ETA s identified in Table 2 above. All fasteners (screws and plates) referred to in Table 2 are of metallic construction with the exception of the SFS Intec ISO-TAK TPP and EJOT HTK 50 plates which are of polymeric construction Ancillary products Ancillary products referred to in this ETA, as a part of installation provisions or in the framework of determining performances are not covered by this ETA and cannot be CEmarked on the basis of it. The ancillary products used as part of installation procedures (see also section 4.3) are: Firestone UltraPlyTPO Cut Edge Sealant A sealant applied to all cut edges of reinforced UltraPly TPO membranes to encapsulate any exposed polyester reinforcement along the cut edge Firestone UltraPly Bonding Adhesive A solvent based bonding adhesive that may be used specifically to secure UltraPly TPO membranes to walls, upstands and kerbs in vertical flashing applications.

5 European Technical Approval No. 12/0419 Page 5 of Intended use The roof waterproofing systems can be installed on flat or sloped roofs to resist the passage of water to the building's internal structure, where requirements concerning safety in case of fire, hygiene, health and the environment and safety in use as well as the durability in the sense of the Essential Requirements N 2 to N 4 of the Directive 89/106/EEC shall be satisfied. The allowable substrates covered by this ETA: profiled steel deck (minimum 0.75mm thick, grade S280GD to EN 10346) concrete* lightweight concrete* wooden deck * * large scale testing of wind uplift performance has been established on a trapezoidal steel deck, therefore prior to use, pullout resistance of the fasteners from concrete or wooden deck substrates must be demonstrated to exceed the pullout value obtained from a steel deck. No performance has been determined [NPD] for external roof fire performance of the system when installed on a wooden deck see clause The insulation material must be CE marked according to the relevant harmonized European standards and shall have a minimum performance as stated in clause 4.2. The provisions made in this ETA are based on an assumed intended working life of the mechanically fastened waterproofing system of 10 years, provided that the roof waterproofing kit is subjected to appropriate installation, use and maintenance. These provisions are based upon the current state of the art and the available knowledge and experience. The indications given on the working life cannot be interpreted as a guarantee given by the producer or FM Approvals Limited, but are to be regarded only as a means for choosing the appropriate products in relation to the expected, economically reasonable working life of the works. 2 Characteristics of the product(s) and methods of verification 2.1 Characteristics of the roof waterproofing system The components of the mechanically fastened roof waterproofing system show the characteristic values with respect to the permissible tolerances which are stated in the Manufacturer s Technical Dossier (MTD) to this ETA. The chemical composition of the components of the kit and the detailed manufacturing methods are confidential and deposited with FM Approvals Limited. The property values of the waterproofing sheets and the assembled systems, which have been verified by the approval testing and reported in this ETA, fulfill the requirements of the ETAG 006. By using information in this ETA, an evaluation for the intended use of the waterproofing system can be carried out by the user, taking account of national requirements of member states, where the product shall be used Methods of verification Assessment of the fitness of the roof waterproofing system for the intended use with regard to the essential requirements N 2 to N 4 inclusive was performed following the procedures of ETAG 006 (as amended April 2007). 2.2 Mechanical resistance and stability (ER1) Not applicable.

6 European Technical Approval No. 12/0419 Page 6 of Safety in case of fire (ER2) Membranes The performance of the reaction to fire behavior of the Firestone UltraPly TPO waterproofing membranes leads to the classification of Class E for all thicknesses according to EN :2007+A1:2009. This is part of the CE-marking of the sheets in accordance with EN System The classification of the external fire performance of the roof waterproofing system according to EN :2005+A1:2009 is either B ROOF (t1) or B ROOF (t3) for specific combinations as detailed in Annex 4 and subject to the following end use conditions: roof pitch up to 20 degrees for B ROOF (t1) for 1.1mm and 1.5mm UltraPly TPO, roof pitch equal to 30 degrees for B ROOF (t1) for 1.8mm UltraPly TPO, roof pitch up to 10 degrees for B ROOF (t3) for 1.8mm UltraPly TPO, any profiled and non perforated trapezoidal steel deck, any non combustible continuous deck with a minimum thickness of 10mm. Note: no performance has been determined (NPD) for the UltraPly TPO system when installed on a wooden deck substrate (see Annex 4). 2.4 Hygiene, health and environment (ER3) According to the manufacturer's declaration the mechanically fastened roof waterproofing systems do not contain any dangerous substances as currently contained in the EU database 5. Within the scope of this approval there may be other requirements applicable to dangerous substances resulting from transposed European legislation or applicable national laws, regulations and administrative provisions. 2.5 Safety in use (ER4) Membranes The characteristic values of the waterproofing membranes, which are CE-marked in accordance with EN 13956, are given in Annex System The systems of mechanically fastened flexible roof waterproofing membranes Firestone UltraPly TPO have obtained the admissible design loads (W adm ) shown in Table 3 below for wind uplift in accordance with ETAG 006. Values apply for use on a profiled steel deck (minimum thickness 0.75mm and S280GD (or higher) grade to EN 10346). Table 3 Roof Membranes Fastener screw Washer name W adm name 1.1mm and 1.2mm UltraPlyTPO Firestone AP fastener Firestone HD seam plate 725 N/fastener (1) 5 Notes are stated in Guidance Paper H: A harmonized approach relating to Dangerous substances under the construction product directive, Brussels, 18 February 2000

7 European Technical Approval No. 12/0419 Page 7 of mm and 1.8mm Firestone Firestone 900 N/fastener UltraPlyTPO AP fastener HD seam plate UltraPly TPO SFS Intec SFS Intec 850 N/fastener (1) (all thicknesses) IR2 4.8 x L IR 82 x 40 UltraPly TPO (all thicknesses) SFS Intec ISO-TAK BS 48 SFS Intec ISO-TAK Twin Peak Plus (TPP) 850 N/fastener (1) 1.2mm, 1.5mm and 1.8mm UltraPly TPO EJOT Dabo TKR 4.8 EJOT HTK N/fastener (1) Value of W adm obtained after test rounded down by request of the ETA Holder 2.6 Protection against noise (ER5) Not applicable 2.7 Energy economy and heat retention (ER6) Not applicable (since insulation does not form part of the kit covered by this ETA) 2.8 Aspects of durability The durability requirements of ETAG 006 are assessed as satisfied for both the membranes and the specified fasteners. 3 Evaluation and attestation of conformity and CE marking 3.1 System of attestation of conformity According to the Decision 98/143/EC of the European Commission 6 system 2+ for the procedure of attestation of conformity (Annex III, clause 2(ii) first possibility of Directive 89/106/EEC) applies for mechanically fastened roof waterproofing system. Attestation of Conformity System 2+ is defined as: Declaration of conformity of the product by the manufacturer on the basis of: (a) Tasks for the manufacturer: (1) initial type testing of the product; (2) factory production control; (3) testing of samples taken at the factory in accordance with a prescribed test plan. (b) Tasks for the notified body: (4) certification of factory production control on the basis of: initial inspection of factory and of factory production control; continuous surveillance, assessment and approval of factory production control. 6 Official Journal of the European Communities L 42, 14 February 1998

8 European Technical Approval No. 12/0419 Page 8 of Responsibilities The tasks of the manufacturer and the notified body for the roof membranes are done in conjunction with the attestation of conformity processes according to EN The required additional attestation of conformity related to the kit to ensure that the specified components as approved with this ETA are delivered and combined is as described in ETAG 006. This shall be marked with a separate CE marking of the kit according to clause Tasks of the manufacturer Factory production control The manufacturer shall exercise permanent internal control of production. All the elements, requirements and provisions adopted by the manufacturer shall be documented in a systematic manner in the form of written policies and procedures, including records of results performed. This production control system shall insure that the product is in conformity with this ETA. The factory production control shall be in accordance with the appropriate part of the control plan 7 which is a confidential part of the MTD and is deposited with FM Approvals Limited. The factory production control is in conformity with ETAG 006. The manufacturer may only use products according to the MTD. He shall inspect or control the initial materials on acceptance according to the control plan. The results of the factory production control shall be recorded and evaluated in accordance with the provisions of the control plan. The records shall include at least the following information: Name of the product and of raw materials, type of inspection or control, date of manufacture of the product, batch number if needed, and date of inspection or control of the product, result of inspections or controls and, as far as applicable, comparison with the requirements, signature of the person responsible for the factory production control. The records shall be kept for at least five years. On request they shall be presented to FM Approvals Limited. Details concerning extent, type and frequency of the tests or inspections to be performed within the scope of the factory production control shall correspond to the control plan which is part of the MTD to this ETA Initial type-testing of the product The initial type-testing refers to the product properties stated in the appropriate part of the control plan to this ETA. The initial type-testing conforms to ETAG 006. If the verifications underlying this ETA have been established based on samples from the current production, these will replace the initial type-testing. 7 The "control plan" is a confidential part of the MTD to this ETA and deposited with FM Approvals Limited. It contains the required information on the factory production control, on the initial typetesting and the initial inspection of the factory and the continuous surveillance, assessment and approval of factory production control. As far as this is relevant to the tasks of the notified body involved in the procedure of attestation of conformity the control plan will be handed over to the notified body.

9 European Technical Approval No. 12/0419 Page 9 of 18 Otherwise the necessary initial type-testing shall be carried out according to the provisions of the control plan and observance of the required property values shall be ascertained by the notified body. After changing the production process or starting the production in another manufacturing plant the initial type-testing shall be repeated Other tasks for the manufacturer The manufacturer shall, on the basis of a contract, involve a body which is notified for the tasks referred to in section 3.1 in the field of the product in order to undertake the actions laid down in section For this purpose, the control plan referred to in section shall be handed over by the manufacturer to the notified body involved. The manufacturer shall make a declaration of conformity, stating that the product is in conformity with the provisions of this ETA Task of the notified body Initial type testing Approval tests have been conducted under the responsibility of FM Approvals Limited and the results have been assessed as satisfying the requirements of Chapter 6 of ETAG 006 (as amended 2007) as part of the ETA issuing process. These tests shall be used for the purposes of initial type testing Initial inspection of factory and factory production control The appropriate part of the control plan states the information on the properties which have to be controlled by the notified body involved for initial inspection of factory and factory production control. The notified body has to control the devices and equipments and the documentation of the factory production control of the manufacturer when starting the production or starting a new production line. The notified body shall retain the essential points of its actions referred to above and state the results obtained and conclusions drawn in a written report. The notified certification body involved by the manufacturer shall issue an EC certificate of conformity of the factory production control stating the conformity with the provisions of this ETA. After changing the production process or starting the production in another manufacturing plant the initial inspection of factory and factory production control shall be repeated. The notified body shall issue a new EC certificate of conformity of the factory control stating the conformity with the provisions of this ETA Continuous surveillance, judgment and assessment of factory production control The appropriate part of the control plan states the information on properties to be checked by the notified body involved. The notified body shall retain the essential points of its actions referred to above and state the results obtained and conclusions drawn in a written report. In cases where the provisions of this ETA and its control plan are no longer fulfilled the certification body involved shall withdraw the certification of conformity and inform FM Approvals Limited without delay.

10 European Technical Approval No. 12/0419 Page 10 of CE marking of the kit The CE marking 8 shall be affixed by the manufacturer on the packaging of the kit of the roof waterproofing Firestone UltraPly TPO or its accompanying documents. The letters "CE" shall be followed by the identification number of the notified body, and be accompanied by the following additional information: - name and address or identifying mark of the manufacturer, - last two digits of the year in which the CE marking was affixed, - number of the EC certificate for the factory production control, - number of the European technical approval: ETA-12/ number of the European technical approval guideline: ETAG 006. The approved components shall be specified as belonging to the mechanically fastened roof waterproofing kit Firestone UltraPly TPO" CE marking and accompanying information: Letters "CE" 1725 Identification number of notified body (system 2 +) Firestone Building Products Europe Ikaroslaan 75 B-1930 Zaventem Belgium production at Factory 1 Name and address of the ETA holder and identification of production location. 12 two last digits of year of affixing CE marking 1725-CPD-xxxx number of the EC certificate for the FPC ETA-12/0419 ETAG 006 Mechanically fastened roof waterproofing system Declared values of the product and the system see Annexes of ETA-12/0419 ETA number ETAG number Intended use Classification and characteristics of the product 4 Assumptions under which the fitness of the product(s) for the intended use was favourably assessed 4.1 Manufacturing The components of the kit of the mechanically fastened roof waterproofing kit are factory-made according to the procedure laid down in the MTD. 8 Notes on the CE marking are stated in Guidance Paper D "CE marking under the Construction Products Directive", Brussels, 1 August 2002

11 European Technical Approval No. 12/0419 Page 11 of 18 The ETA is issued for the kit on the basis of agreed data/information, deposited with FM Approvals Limited, which identifies the kit that has been assessed and judged. Changes to the components of the kit or in the production process of the components, which could result in the production process and/or the properties of the product deposited being incorrect should be notified to FM Approvals Limited before the changes are introduced. FM Approvals Limited will decide whether or not such changes affect the ETA and consequently the validity of the CE marking on the basis of the ETA and, if so, what further assessment or alterations to the ETA shall be necessary. 4.2 Design and dimensioning Correct design of all roofs incorporating the systems detailed in this ETA shall be a requirement. In particular full account shall be taken of: - dead and imposed loads, - relevant design codes and national rules (eg EN and relevant national annexes) - relevant design wind pressure on all roof areas (eg field of roof, perimeters and corners), - structural strength, stiffness and deflection limits, - attachment of the roof deck to the structural framing, - provision of insulation, - assessment of condensation risk and provision of vapour control layers, - sound insulation, - fire precaution, - roof attachments, fixtures and penetrations, - falls and drainage, - means of access for inspection and maintenance. The substrate onto which the waterproofing kit is to be laid should be sufficiently rigid, dense and dimensionally stable to support the system (roof sheet and insulation). In respect of the compression behaviour of the insulation material, it shall be ensured that the insulation material on site has a minimum performance of: Compressive strength at 10% deformation 50 kpa (to method of EN 826) Point load behaviour 600 N, at 5mm deformation (to method of EN 12430) The insulation material must be CE marked according to the relevant harmonized European standard. The durability shall be assessed in accordance with these standards. The required thickness of the insulation material should be designed in accordance with national regulations. 4.3 Installation The fitness for use of the mechanically fastened roof waterproofing system can be assumed only if the installation is carried out according to the installation instructions stated in the MTD by the manufacturer and any other applicable national requirements. In all cases the following points shall be accounted for: installation by appropriately trained personnel, familiar with the requirements of the Firestone Building Products installation manual, installation of only those components which are part of the system identified by this ETA, installation with the required tools and equipment, safety during installation,

12 European Technical Approval No. 12/0419 Page 12 of 18 inspecting the substrate surface for cleanliness and correct preparation, checking suitability for installation of the system in adverse weather conditions (eg high humidity, rain, snow, fog, temperatures below zero centigrade). inspections during installation and of the finished roof waterproofing system and documentation of the results. If there is doubt about the suitability of the substrate on a construction site, a pullout test(s) on site shall be performed to verify the performance of the fastener (see ETAG 006 Annex C) Joints For all joint types described below, any exposed visible cut edges shall be covered with UltraPly TPO Cut Edge Sealant so as to totally encapsulate any exposed polyester reinforcement along the cut edge UltraPly TPO Membrane Longitudinal Joints: Figure 1 shows the standard overlap design for the longitudinal joints of the mechanically fastened Firestone UltraPly TPO roofing membrane. The sheets shall be positioned with a minimum overlap of 150 mm and the overlap shall be hot air welded over at least 40 mm by automatic welding tools or over at least 50 mm by manual welding tools, calculated from the edge of the upper sheet of the overlap. Figure 1: Standard overlap with mechanical attachment UltraPly TPO Membrane Transverse Joints Figure 2 shows a typical transverse joint and/or joints without mechanical fasteners in the overlap. These joints shall be executed with a minimum overlap of 100 mm and hot air welded over 40 mm (automatic weld) or 50 mm (manual weld), calculated from the edge of the upper sheet of the overlap. The weld shall be executed and pressured with a pressure roller.

13 European Technical Approval No. 12/0419 Page 13 of 18 Figure 2: Standard overlap without mechanical attachment Fastener spacing The number of fasteners shall be determined according to national legislation (eg design codes such as EN and relevant National Annex) for every relevant roof zone (eg field of roof, perimeter and corner). The admissible design wind load per fastener (W adm ) is given in this ETA (see clause and Table 3).The length of the fasteners shall be determined to ensure that the fastener will be protruding sufficiently through the profiled steel deck as required by applicable national provisions Standard installation detail for upstand and base tie-in The membrane must be attached mechanically over the entire perimeter and around penetrations. The base tie-in shall be executed by mechanically attaching the membrane either in the plane of the roof or in the upstand with appropriate fasteners every 300 mm on centres. All upstands are further finished with a separate strip of UltraPly TPO membrane which is fully adhered (as of 450 mm height) with UltraPly Bonding Adhesive and/or mechanically attached according to the guidelines of the manufacturer. On top of the upstand, the membrane is mechanically attached and finished with an applicable detail from the Firestone installation manual. Figure 3: Base tie-in detail

14 European Technical Approval No. 12/0419 Page 14 of Manufacturer's responsibilities It is the manufacturer's responsibility to make sure that all those who utilize the approved roof waterproofing system will be appropriately informed about the specific conditions according to sections 1, 2, 4, and 5 (including the annexes to this ETA) and also any relevant parts of the MTD associated with this ETA. 5 Recommendations 5.1 Recommendations for packaging, transport and storage The Firestone UltraPly TPO membranes shall be stored above ground (roof level) on pallets providing a clean, smooth and dry substrate without sharp protusions and suitably protected against the effects of inclement weather. The membranes must be protected from any source of heat, naked flame or sparks. Fasteners shall be stored in their original container in dry conditions until just prior to use. Plastic washers/plates shall not be left exposed to direct sunlight prior to installation. Ancillary products shall be stored in accordance with the manufacturers instructions. Further guidance on packaging, transport and storage is available from the installation manual of the ETA holder. 5.2 Recommendations for use, maintenance and repair It is the responsibility of the manufacturer to ensure that proper information on the use of the Firestone UltraPly TPO membranes and specified fasteners are available at each installation, including guidance from this ETA where relevant. Assessment of fitness for use of the system is based on the assumption that appropriate periodic inspection and maintenance of the system is performed by the end user. Repairs to the roofing system shall be made with care using similar materials to the original installation and in accordance with instructions of the holder of this ETA. On behalf of FM Approvals Limited Date 21 October 2012 R A Zammitt Senior Engineer A J Was Certification Manager

15 European Technical Approval No. 12/0419 Page 15 of 18 Characteristic Test Method Units Value Value Value Value Expression Thickness EN mm MDV (-5%,+10%) Mass per unit area EN kg/m MDV (-5%,+10%) Reaction to fire EN Class E Class E Class E Class E EN Watertightness EN 1928 kpa Pass Pass Pass Pass Pass Test B Peel resistance of EN N/50mm MLV joints Shear resistance of EN N/50mm MLV joints Tensile strength EN N/50mm MLV Tensile elongation EN % MLV Resistance to dynamic impact Hard substrate EN Test A mm MLV Resistance to dynamic impact Soft substrate Resistance to static loading soft substrate Resistance to static loading hard substrate EN Test B EN Test A EN Test B mm MLV kg MLV kg MLV Tear resistance EN N MLV Dimensional EN % MLV stability Resistance to cold EN C MLV bending Resistance to UV EN 1297 visual Pass Pass Pass Pass Pass radiation Water vapour transmission EN 1931 µ MDV (-30%,+30%) Resistance to EN Pass 1 Pass 1 Pass 1 Pass 1 Pass 1 liquid chemicals Resistance to heat ageing (EN 1296) Peel resistance of EN % Δ 20 Δ 20 Δ 20 Δ 20 Pass joints Shear resistance of EN % Δ 20 Δ 20 Δ 20 Δ 20 Pass joints Resistance to cold bending EN C N/A N/A N/A N/A Only for bituminous Resistance to UV ageing (EN 1297) Resistance to cold EN C Δ 15 Δ 15 Δ 15 Δ 15 Pass bending Resistance to water ageing (EN 1847) Peel resistance of joints EN % Δ 20 Δ 20 Δ 20 Δ 20 Pass MLV (manufacturers limiting value) and MDV (manufactured declared value) apply to both longitudinal (machine) direction and transverse (cross-machine) direction. Firestone UltraPly TPO membrane Performance Characteristics Annex 1 of ETA 12/0419

16 European Technical Approval No. 12/0419 Page 16 of 18 Firestone AP Firestone HD seam plate Note: All dimensions above are in mm using the metric system, with the exception of any values shown in parentheses [ ] which are the equivalent values in inches using the imperial system. Combination 1 AP fastener and HD seam plate Annex 2 Of the European Technical Approval ETA 12/0419

17 European Technical Approval No. 12/0419 Page 17 of 18 Characteristic Values of Axial Load Resistance (kn) Roof Fastener Combination Substrate Steel minimum 0.7mm thick S280GD to EN Plywood t 19mm exterior grade to EN 636 Concrete 100mm thick C25/30 to EN Annex Screw Washer / Linear Fastener Steel Plywood Concrete 2 Firestone AP Firestone HD seam plate Mean Values of Axial Load Resistance (kn) Annex Roof Fastener Combination Substrate Steel minimum 0.7mm thick S280GD to EN Plywood t 19mm exterior grade to EN 636 Concrete 100mm thick C25/30 to EN Firestone AP Firestone HD seam plate The above components passed the resistance to corrosion test after 15 cycles to the method of D of ETAG 006. The above components passed the resistance to unwinding test specified in Annex D of ETAG 006. Characteristic and Mean Values of Axial Load Resistance Annex 3 Of the European Technical Approval ETA 12/0419

18 European Technical Approval No. 12/0419 Page 18 of 18 Annex 4 : External Roof Fire Classification All the mechanically attached roof systems* detailed below achieved a B ROOF (t1) classification in accordance with EN for the following field of application: Range of pitches: greater than or equal to 0 and less than 20 for 1.1mm and 1.5mm UltraPly TPO and eqaul to 30 for 1.8mm UltaPly TPO. Range of decks: any profiled and non perforated trapezoidal steel deck. any non-combustible contiuous deck with a minimum thickness of 10mm. Firestone UltraPly TPO 1.1mm Firestone UltraPly TPO 1.5mm Firestone UltraPly TPO 1.8mm 1.1mm UltraPly TPO mechanically attached Acceptable insulation materials: 100mm mineral wool (density 150kg/m 3 ) or 75mm faced polyisocyanurate (PIR) board (density 34.9kg/m 3 ), density of PIR foam 27.7kg/m 3 or 70mm faced PIR board, density of PIR foam 32.0kg/m 3 and surface mass of the double faced PIR board 3287g/m 2. Profiled steel deck. 1.5mm UltraPly TPO mechanically attached 40mm mineral wool (density 175kg/m 3 ), reaction to fire class A1 to EN mm expanded polystyrene (EPS 100) board,reaction to fire class E to EN mm polyethylene vapour control layer,reaction to fire class E to EN Profiled steel deck 1.8mm UltraPly TPO mechanically attached 80mm mineral wool (density 150kg/m 3 ) Profiled steel deck The mechanically attached roof systems* detailed below achieved a B ROOF (t3) classification in accordance with EN for the following field of application: range of pitches: greater than or equal to 0 and less than 10 range of decks: any profiled and non perforated trapezoidal steel deck any non-combustible continuous deck with a minimum thickness of 10 mm Firestone UltraPly TPO 1.8mm 1.8mm UltraPly TPO mechanically attached 100mm mineral wool (density 154kg/m 3 ) Profiled steel deck * Full details for each construction tested above are contained in the formal Classification Reports establishing the B ROOF (t1) or B ROOF (t3) performance available from the ETA holder.

Page 1 of European Technical Approval ETA-12/0495

Page 1 of European Technical Approval ETA-12/0495 Page 1 of European Technical Approval ETA-12/0495 VTT Expert Services Oy PL 1001 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston

More information

European technical approval

European technical approval Authorised and notified according to Article 10 of the Council Directive 89/ 106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of Member States relating

More information

Europeiskt Tekniskt Godkännande European Technical Approval

Europeiskt Tekniskt Godkännande European Technical Approval SITAC Box 553 SE 371 23 Karlskrona SWEDEN MEMBER OF EOTA Tfn.: +46-(0)10-516 63 00 Fax: +46-(0)455-206 88 E-mail: info@sitac.se Europeiskt Tekniskt Godkännande European Technical Approval Handelsnamn Trade

More information

European Technical Approval ETA-12/0500

European Technical Approval ETA-12/0500 ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC

More information

European Technical Approval ETA 13/0526

European Technical Approval ETA 13/0526 European Technical Approval ETA 13/0526 Trade Name Holder of the approval Website Generic type and use of construction product DOLCEA i3 PCIM S.A. Rue du Péquet 54 5590 Achene (Ciney) Belgium www.isoproc.eu

More information

European Organisation for Technical Approvals

European Organisation for Technical Approvals Warrington Certification Limited, Holmesfield Road, Warrington, WA1 2DS Tel. +44 (0) 1925-646777 Fax +44 (0) 1925-646667 Member of EOTA Authorised and notified according to Article 10 of the Council Directive

More information

Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN

Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN VTT Expert Services Oy PL 1001 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu

More information

European Technical Approval ETA-10/0124

European Technical Approval ETA-10/0124 ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC

More information

CHESTERFLEX ROOF WATERPROOFING MEMBRANES

CHESTERFLEX ROOF WATERPROOFING MEMBRANES CI/SfB (47) Ln2 Chesterfelt Ltd CHESTERFLEX ROOF WATERPROOFING MEMBRANES Certificate No 94/3062 DETAIL SHEET 2 Product THIS DETAIL SHEET RELATES TO CHESTERFLEX ROOF WATERPROOFING MEMBRANES, POLYESTER REINFORCED

More information

Page 1 of European Technical Approval ETA-08/0018

Page 1 of European Technical Approval ETA-08/0018 Page 1 of European Technical Approval ETA-08/0018 VTT Expert Services Oy PL 1001 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston

More information

European Technical Approval ETA-06/0259

European Technical Approval ETA-06/0259 European Technical Approval ETA-06/0259 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and

More information

European Technical Assessment ETA-15/0028 of 23/02/2015

European Technical Assessment ETA-15/0028 of 23/02/2015 ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of

More information

Page 1 of European Technical Approval ETA-09/0129, Issued on September 26, 2011, valid until June 3, 2014

Page 1 of European Technical Approval ETA-09/0129, Issued on September 26, 2011, valid until June 3, 2014 Page 1 of European Technical Approval ETA-09/0129, Issued on September 26, 2011, valid until June 3, 2014 VTT Expert Services Ltd PL 1001 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin

More information

European Technical Approval ETA-10/0153

European Technical Approval ETA-10/0153 ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC

More information

Sealfire W1000 Compound. (2 references for the same product) Fire Stopping and Sealing Product: Penetration Seals

Sealfire W1000 Compound. (2 references for the same product) Fire Stopping and Sealing Product: Penetration Seals UL INTERNATIONAL (UK) LTD Wonersh House, Building C, The Guildway, Old Portsmouth Road, Guildford. GU3 1LR. United Kingdom. Phone : +44 1483 302130 Fax : +44 1483 302230 Email : Inform.NB@uk.ul.com Website

More information

Eurooppalainen tekninen hyväksyntä ETA - 13/0613 European Technical Approval

Eurooppalainen tekninen hyväksyntä ETA - 13/0613 European Technical Approval VTT Expert Services Ltd PL 1001 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu

More information

Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN

Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN Page 1 of European Technical Approval ETA-09/0129 VTT Valtion Teknillinen Tutkimuskeskus PL 1000 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan

More information

Authorised and notified according to Article 10 of the Council Directive 89/106/EEC of 21 December 1988 on the

Authorised and notified according to Article 10 of the Council Directive 89/106/EEC of 21 December 1988 on the ÖSTERREICHISCHES I N S T I T U T F Ü R B A U T E C H N I K A-1010 Vienna, Schenkenstrasse 4 Tel.: + 4 3 ( 0 ) 1-5 3 3 6 5 5 0 Fax: + 4 3 ( 0 ) 1-5 3 3 6 4 2 3 relating to construction products E - m a

More information

Polymeric membrane for roof waterproofing

Polymeric membrane for roof waterproofing Product Data Sheet Edition 09.2008 Revision no: 0 Identification no: 01 09 01 02 200 0 120000 Sarnafil TS 77-12 Polymeric membrane for roof waterproofing Construction Product Description Uses Characteristics

More information

CERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011

CERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS

More information

European Technical Approval ETA-08/0121

European Technical Approval ETA-08/0121 European Technical Approval - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and use of construction

More information

European Technical Assessment ETA-10/0153 of 10/06/2015

European Technical Assessment ETA-10/0153 of 10/06/2015 ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of

More information

Construction. SikaProof A-08 Edge, A-12 Edge. Fully bonded FPO sheet membrane in L-shape for the SikaProof A waterproofing system. Product Description

Construction. SikaProof A-08 Edge, A-12 Edge. Fully bonded FPO sheet membrane in L-shape for the SikaProof A waterproofing system. Product Description Product Data Sheet Edition 15/10/2014 Identification no: 02 07 04 10 300 0 000002 SikaProof A Edge SikaProof A-08 Edge, A-12 Edge Fully bonded FPO sheet membrane in L-shape for the SikaProof A waterproofing

More information

Europeiskt Tekniskt Godkännande European Technical Approval

Europeiskt Tekniskt Godkännande European Technical Approval SITAC Box 553 SE 371 23 Karlskrona SWEDEN MEMBER OF EOTA Tfn.: +46-(0)10-516 63 00 Fax: +46-(0)455-206 88 E-mail: info@sitac.se Europeiskt Tekniskt Godkännande European Technical Approval ETA-12/0257 Handelsnamn

More information

Roofing. Sarnafil S 327-15EL. Polymeric membrane for roof waterproofing. Product Description

Roofing. Sarnafil S 327-15EL. Polymeric membrane for roof waterproofing. Product Description Roofing Product Data Sheet Edition 02.2015 Identification no: 02 09 01 01 201 0 150000 Version no. 04 Sarnafil S 327-15EL Polymeric membrane for roof waterproofing Product Description Sarnafil S 327-15EL

More information

Fire Stopping and Sealing Product: Penetration Seals

Fire Stopping and Sealing Product: Penetration Seals UL INTERNATIONAL (UK) LTD Wonersh House, Building C, The Guildway, Old Portsmouth Road, Guildford. GU3 1LR. United Kingdom. Phone : +44 1483 302130 Fax : +44 1483 302230 Email : Inform.NB@uk.ul.com Website

More information

European Technical Approval ETA 13/0384

European Technical Approval ETA 13/0384 European Technical Approval ETA 13/0384 Trade Name Holder of the approval Website Generic type and use of construction product Isobriq EU, Isobriq LE, Isobriq PA & Isobriq ZE Isobriq sa 49 Rue Slar 4801

More information

European Technical Approval ETA-10/0200

European Technical Approval ETA-10/0200 Deutsches Institut für Bautechnik Anstalt des öffentlichen Rechts Kolonnenstr. 30 B 10829 Berlin Germany Tel.: +49(0)30 787 30 0 Fax: +49(0)30 787 30 320 E-mail: dibt@dibt.de Internet: www.dibt.de Mitglied

More information

European technical approval

European technical approval Authorised and notified according to Article 10 of the Council Directive 89/ 106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of Member States relating

More information

Memtec Single Ply PVC Membrane Roofing and Waterproofing Technology. Modern Efficient Performance Cost Effective Flat Roofing Systems

Memtec Single Ply PVC Membrane Roofing and Waterproofing Technology. Modern Efficient Performance Cost Effective Flat Roofing Systems Memtec Single Ply PVC Membrane Roofing and Waterproofing Technology Modern Efficient Performance Cost Effective Flat Roofing Systems Introduction A complete range of Memtec Roofing and Waterproofing Single

More information

Sika Membran System For Sealing and Waterproofing Construction Gaps in Building Façades

Sika Membran System For Sealing and Waterproofing Construction Gaps in Building Façades Construction Sika For Sealing and Waterproofing Construction Gaps in Building Façades Waterproof and Airtight Flexible Seal Controlled Vapour Diffusion Bonds to any Building Substrate Prevents Interstitial

More information

Eurooppalainen tekninen hyväksyntä ETA-12/0045 European Technical Approval

Eurooppalainen tekninen hyväksyntä ETA-12/0045 European Technical Approval VTT EXPERT SERVICES OY PL 1001 02044 VTT Tel. + 358 20 722 111 www.vttexpertservices.fi Rakennusalan tuotteita koskevan jäsenvaltioiden lainsäädännön lähentämisestä 21 päivänä joulukuuta 1988 annetun neuvoston

More information

Test report P 7013-E. InoPaz H2O. Pazkar LTD. Alon Tavor Industrial Zone AFULA 18000 / Israel. J. Magner Dipl.-Ing. N. Machill.

Test report P 7013-E. InoPaz H2O. Pazkar LTD. Alon Tavor Industrial Zone AFULA 18000 / Israel. J. Magner Dipl.-Ing. N. Machill. Kiwa Polymer Institut GmbH Quellenstraße 3 65439 Flörsheim-Wicker Tel. +49 (0)61 45-5 97 10 Fax +49 (0)61 45-5 97 19 www.kiwa.de Test report P 7013-E Testing order: Test of the waterproofing system based

More information

Quality Regulations for Profiles

Quality Regulations for Profiles Quality Regulations for Profiles September 2010 Quality Regulations for Profiles Page 2/42 Contents Preface... 4 1. Terms and Definitions... 5 1.1 Third parties... 5 1.2 Independent laboratories... 5 1.3

More information

Built-up roofing solutions with rigid insulation boards on concrete decks for new-build and refurbishment E-a5

Built-up roofing solutions with rigid insulation boards on concrete decks for new-build and refurbishment E-a5 Cl Sfb (27-9) Rn7 M2 December 2004 Built-up roofing solutions with rigid insulation boards on concrete decks for new-build and refurbishment E-a5 Fesco, Fesco S, Retrofit, Retrofit S, Fesco Fillet, PF,

More information

HIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS

HIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS BSW HIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS BSW is a fully reinforced Pre-Applied system membrane designed for horizontal and vertical external blind-side

More information

DOW CORNING SENEFFE (Belgium) DOW CORNING GmbH WIESBADEN (Germany) This version replaces ETA 03/0003 valid from 2008-04-10 until 2013-04-09

DOW CORNING SENEFFE (Belgium) DOW CORNING GmbH WIESBADEN (Germany) This version replaces ETA 03/0003 valid from 2008-04-10 until 2013-04-09 European Technical Approval ETA-03/0003 Trade name: Holder of the approval: Website: Generic type and use of construction product(s): DOW CORNING 3362 AND 3362 HD BLACK GREY WHITE DOW CORNING Parc Industriel

More information

ETAG 004 EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS WITH RENDERING

ETAG 004 EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS WITH RENDERING European Organisation for Technical Approvals Europäische Organisation für Technische Zulassungen Organisation Européenne pour l Agrément Technique Edition March 2000 Amendment June 2008 GUIDELINE FOR

More information

European Technical Assessment ETA-15/0652 of 27/10/2015

European Technical Assessment ETA-15/0652 of 27/10/2015 ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011

More information

Europeiskt Tekniskt Godkännande European Technical Approval

Europeiskt Tekniskt Godkännande European Technical Approval SITAC Box 553 SE 371 23 Karlskrona SWEDEN MEMBER OF EOTA Tfn.: +46-(0)10-516 63 00 Fax: +46-(0)455-206 88 E-mail: info@sitac.se Europeiskt Tekniskt Godkännande European Technical Approval ETA-11/0380 Handelsnamn

More information

ALUMASC ROOF WATERPROOFING MEMBRANES EUROROOF MASTERGOLD ROOF WATERPROOFING MEMBRANE

ALUMASC ROOF WATERPROOFING MEMBRANES EUROROOF MASTERGOLD ROOF WATERPROOFING MEMBRANE Alumasc Exterior Building Products Ltd White House Works Bold Road Sutton St Helens Merseyside WA9 4JG Tel: 01744 648 400 e-mail: roofing@alumasc-exteriors.co.uk website: www.alumascroofing.co.uk APPROVAL

More information

Asphalt Shingle Application Requirements

Asphalt Shingle Application Requirements Alberta Allied Roofing Association Asphalt Shingle Application Requirements Section 1 Roof Decks 1.1 General Asphalt Shingles are not permitted to be installed directly over rigid insulation. When Asphalt

More information

Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN

Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN Page 1 of European Technical Approval ETA-09/0082 VTT Expert Services Oy PL 1001 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston

More information

Cavity Drain R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high.

Cavity Drain R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high. CI/SfB Tn6 L6813 September 2013 RIW CAVITY DRAIN R20 R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high. Other systems are available for specific uses,

More information

0845 0098 980 www.nicholsonsts.com

0845 0098 980 www.nicholsonsts.com 0845 0098 980 www.nicholsonsts.com ROOFTRAK The IFP is revolutionising the way we fix things to roofs. Technical Director of a leading UK roofing system manufacturer The ROOFTRAK-IFP A revolutionary solution

More information

European technical approval

European technical approval Authorised and notified according to Article 10 of the Council Directive 89/ 106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of Member States relating

More information

ETAG 016 SELF-SUPPORTING COMPOSITE LIGHTWEIGHT PANELS. (Part one : G E N E R A L)

ETAG 016 SELF-SUPPORTING COMPOSITE LIGHTWEIGHT PANELS. (Part one : G E N E R A L) European Organisation for Technical Approvals Europäische Organisation für Technische Zulassungen Organisation Européenne pour l Agrément Technique Edition NOVEMBER 2003 GUIDELINE FOR EUROPEAN TECHNICAL

More information

NEW ELECTRICAL SUBSTATION Building 300 SECTION 07 53 23 ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING WORK

NEW ELECTRICAL SUBSTATION Building 300 SECTION 07 53 23 ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING WORK ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING WORK PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent referenced. The publications are referred to within

More information

Product Data Sheet ROCKPANEL Rockclad

Product Data Sheet ROCKPANEL Rockclad Product Data Sheet ROCKPANEL Rockclad Durable - Xtreme - FS-Xtra United Kingdom 1 Product description ROCKPANEL boards are prefabricated compressed mineral wool boards with synthetic binders. The surface

More information

Insulated Roof & Wall Panels. Product Data Sheet. Trapezoidal Insulated Roof Panels KS1000 RW

Insulated Roof & Wall Panels. Product Data Sheet. Trapezoidal Insulated Roof Panels KS1000 RW Insulated Roof & Wall Panels Trapezoidal Insulated Roof Panels KS1000 RW Overview Kingspan roof panel systems present a superior system compared to conventional multi-part site assembled systems. They

More information

ETAG 022. GUIDELINE FOR EUROPEAN TECHNICAL APPROVAL of Watertight covering kits for wet room floors and or walls

ETAG 022. GUIDELINE FOR EUROPEAN TECHNICAL APPROVAL of Watertight covering kits for wet room floors and or walls European Organisation for Technical Approvals Europäische Organisation für Technische Zulassungen Organisation Européenne pour l Agrément Technique ETAG 022 GUIDELINE FOR EUROPEAN TECHNICAL APPROVAL of

More information

Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN

Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN VTT Expert Services Oy PL 1001 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu

More information

(English language translation, the original version is in Czech language) DEWALT PTB-PRO. DeWalt Black-&-Decker Str. 40 65510 Idstein Germany

(English language translation, the original version is in Czech language) DEWALT PTB-PRO. DeWalt Black-&-Decker Str. 40 65510 Idstein Germany TECHNICKÝ A ZKUŠEBNÍ ÚSTAV STAVEBNÍ PRAHA, s.p. Prosecká 811/76a CZ-190 00 Praha 9 Tel.: +420 286 019 458 Internet: www.tzus.cz Authorised and notified according to Article 10 of the Council Directive

More information

Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN

Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN Page 1 of European Technical Approval ETA-09/0081 VTT Expert Services Ltd PL 1001 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston

More information

RHEPANOL RHEPANOL FK ROOF COVERING SYSTEM

RHEPANOL RHEPANOL FK ROOF COVERING SYSTEM Flachdach Technologie GmbH & Co KG Eisenbahnstrasse 6 8 68199 Mannheim Germany Tel: 00 49 621 8504-372 Fax: 00 49 621 8504-378 e-mail: export@fdt.de website: www.fdt.de APPROVAL INSPECTION TESTING CERTIFICATION

More information

BAUDER BITUMINOUS ROOFING SYSTEMS BAUDERFLEX ROOF WATERPROOFING SYSTEMS

BAUDER BITUMINOUS ROOFING SYSTEMS BAUDERFLEX ROOF WATERPROOFING SYSTEMS Bauder Ltd 70 Landseer Road Ipswich Suffolk IP3 0DH Tel: 01473 257671 Fax 01473 230761 e-mail: mail@bauder.co.uk website: www.bauder.co.uk APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL APPROVALS

More information

Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN

Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN Page 1 of European Technical Approval ETA-10/0359 VTT EXPERT SERVICES OY PL 1001, 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 www.vttexpertservices.fi Rakennustuotedirektiivin (89/106/EEC)

More information

European Technical Approval ETA-04/0013

European Technical Approval ETA-04/0013 ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC

More information

Mechanically Fastened

Mechanically Fastened Mechanically Fastened System Document MECHANICALLY FASTENED SYSTEM Product Information AlkorPlan F 35170 Calendered unreinforced membrane of flexible PVC. Conforms to UEAtc guidelines. Application Used

More information

Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN

Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN Page 1 of European Technical Approval ETA-01/0002 VTT Expert Services Oy PL 1001 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston

More information

This European technical approval

This European technical approval Authorised and notified according to Article 10 of the Council Directive 89/ 106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of Member States relating

More information

STANDARD REQUIREMENTS FOR BONDING OR MECHANICAL ATTACHMENT OF INSULATION PANELS AND MECHANICAL ATTACHMENT OF ANCHOR AND/OR BASE SHEETS TO SUBSTRATES

STANDARD REQUIREMENTS FOR BONDING OR MECHANICAL ATTACHMENT OF INSULATION PANELS AND MECHANICAL ATTACHMENT OF ANCHOR AND/OR BASE SHEETS TO SUBSTRATES ROOFING APPLICATION STANDARD (RAS) No. 117 STANDARD REQUIREMENTS FOR BONDING OR MECHANICAL ATTACHMENT OF INSULATION PANELS AND MECHANICAL ATTACHMENT OF ANCHOR AND/OR BASE SHEETS TO SUBSTRATES Scope 1.1.

More information

SIKA TANKING MEMBRANES SIKAPROOF A MEMBRANES

SIKA TANKING MEMBRANES SIKAPROOF A MEMBRANES Sika Limited Watchmead Welwyn Garden City Hertfordshire AL7 1BQ Tel: 01707 394 444 Fax: 01707 329 129 e-mail: technical@uk.sika.com website: www.sika.co.uk APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL

More information

Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes

Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to

More information

Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN

Rakennustuotedirektiivin (89/106/EEC) artiklan 10, neuvoston direktiivi 21. joulukuuta 1988, mukaisesti notifioitu tuotehyväksyntälaitos EOTAN JÄSEN Page 1 of European Technical Approval ETA 08/0093 VTT VALTION TEKNILLINEN TUTKIMUSKESKUS PL 1000 02044 VTT Puh. +358 20 722 4911 Telekopio +358 20 722 7003 Rakennustuotedirektiivin (89/106/EEC) artiklan

More information

1.2.1 1.1.8 PRODUCTBLADEN GT ROCKPANEL STRUCTURE

1.2.1 1.1.8 PRODUCTBLADEN GT ROCKPANEL STRUCTURE 1..1 1.1.8 PRODUCTBLADEN SHEETS GT page 1 to 6 Rockpanel Structure is a very durable panel with a lightly textured finish, specially developed for use in cladding, fascia, soffit applications. The basic

More information

(English language translation, the original version is in French language) SPIT HIT M. Société SPIT Route de Lyon F-26501 BOURG-LES-VALENCE France

(English language translation, the original version is in French language) SPIT HIT M. Société SPIT Route de Lyon F-26501 BOURG-LES-VALENCE France Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tel. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément

More information

EUROPEAN TECHNICAL APPROVAL ACCORDING TO ETAG 005 - EXPLANATIONS -

EUROPEAN TECHNICAL APPROVAL ACCORDING TO ETAG 005 - EXPLANATIONS - EUROPEAN TECHNICAL APPROVAL ACCORDING TO ETAG 005 - EXPLANATIONS - 1. Particular Abbreviation ETZ : Europäische Technische Zulassung ETA : European Technical Approval ETAG : European Technical Approval

More information

BDA Agrément BAR 14-030/02/A

BDA Agrément BAR 14-030/02/A Number BAR 14-030//A Replaces: BAR 14-030/01/A Date 2014.03.15 Project number 13-B-0739 Validity See www.bda.nl System Supplier (Certificate holder) BDA ADVIES BDA Agrément BAR 14-030//A EcoProof TM ST

More information

RESIDENTIAL ROOFING & RE-ROOFING, ROOF VENTILATION AND ROOF SHEATHING REQUIREMENTS MICHIGAN RESIDENTIAL CODE 2000

RESIDENTIAL ROOFING & RE-ROOFING, ROOF VENTILATION AND ROOF SHEATHING REQUIREMENTS MICHIGAN RESIDENTIAL CODE 2000 RESIDENTIAL ROOFING & RE-ROOFING, ROOF VENTILATION AND ROOF SHEATHING REQUIREMENTS MICHIGAN RESIDENTIAL CODE 2000 SECTION R905 REQUIREMENTS FOR ROOF COVERINGS R905.1 Roof covering application. Roof coverings

More information

European Technical Approval ETA-07/0211

European Technical Approval ETA-07/0211 European Technical Approval ETA-07/0211 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and

More information

Understanding BS EN 771-3: Aggregate concrete masonry units

Understanding BS EN 771-3: Aggregate concrete masonry units 60 Charles Street, Leicester LE1 1FB Tel: 0116 253 6161 Fax: 0116 251 4568 Email: enquiries@cba-blocks.org.uk Website: www.cba-blocks.org.uk February 2006 Understanding BS EN 771-3: Aggregate concrete

More information

WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12

WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12 WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12 87 88 GOOD INDUSTRY PRACTICES 12 WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12.1 BACKGROUND Most roofs in Singapore are constructed using reinforced

More information

LANGLEY S ROOF WATERPROOFING MEMBRANES PARADIENE/PARAFOR ROOF WATERPROOFING SYSTEMS

LANGLEY S ROOF WATERPROOFING MEMBRANES PARADIENE/PARAFOR ROOF WATERPROOFING SYSTEMS Langley Waterproofing Systems Ltd Bishop Crewe House North Street Daventry Northants NN11 4GH Tel: 01327 704778 Fax: 01327 704845 e-mail: enquiries@langley.co.uk website: www.langley.co.uk APPROVAL INSPECTION

More information

ICOPAL POUR AND ROLL ROOF WATERPROOFING ICOPAL POWER ELASTOMERIC ROOF WATERPROOFING SYSTEM

ICOPAL POUR AND ROLL ROOF WATERPROOFING ICOPAL POWER ELASTOMERIC ROOF WATERPROOFING SYSTEM Icopal Limited Barton Dock Road Stretford Manchester M32 0YL Tel: 0161-865 4444 Fax: 0161-864 8433 e-mail: market.uk@icopal.com website: www.icopal.co.uk APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL

More information

APPENDIX 1: ATTACHMENT REQUIREMENTS FOR WIND UPLIFT RESISTANCE

APPENDIX 1: ATTACHMENT REQUIREMENTS FOR WIND UPLIFT RESISTANCE APPENDIX 1: ATTACHMENT REQUIREMENTS FOR WIND UPLIFT NCE Table Application Type Description Page 1A-1 Wood New, Reroof (Tear-Off), Recover C-1 Mechanically Attached Insulation, Bonded Roof Cover 4 1A-2

More information

Roofing Systems. There are many different systems, each with it's own special requirements and benefits. Browse through all the options below.

Roofing Systems. There are many different systems, each with it's own special requirements and benefits. Browse through all the options below. Roofing Systems There are many different systems, each with it's own special requirements and benefits. Browse through all the options below. BUR (Built-Up Roofing) Built-Up-Roofing, BUR is a roof that

More information

CHAPTER 7: Building Systems ROOFING SYSTEMS

CHAPTER 7: Building Systems ROOFING SYSTEMS ROOFING SYSTEMS Purpose Examples 1. Shingle roof system 2. Metal roof with blanket insulation 3. Metal roof with rigid insulation 4. Built-up asphalt roof system 5. Single-ply roof system 6. Modified Bitumen

More information

Building Owners Guide to a Duro-Last System!

Building Owners Guide to a Duro-Last System! Building Owners Guide to a Duro-Last System Table of Contents Section 1: Introduction to Duro-Last Roofing Systems Section 2: Benefits of a Duro-Last Roofing System Section 3: Comparing a Duro-Last Roof

More information

The Kingspan Insulation Price List 1 st January 2013

The Kingspan Insulation Price List 1 st January 2013 Insulation The Kingspan Insulation Price List 1 st January 2013 FOR BUILDING FABRIC INSULATION, CAVITY CLOSERS AND MEMBRANES Visit our website: www.kingspaninsulation.co.uk Low Energy - Low Carbon Buildings

More information

Energy Company Obligation (ECO): Technical Monitoring Questions

Energy Company Obligation (ECO): Technical Monitoring Questions Energy Company Obligation (ECO) Technical Monitoring Questions v1 30/05/2013 Energy Company Obligation (ECO): Technical Monitoring Questions Under ECO suppliers are required to instruct suitably qualified

More information

AND MEMBRANES ROOFING UNDERLAYS. www.fakro.com

AND MEMBRANES ROOFING UNDERLAYS. www.fakro.com AND MEMBRANES 010 ROOFING UNDERLAYS 1 HO DOES YOUR ROOF BREATHe? MEMBRANES THE WAY to A WARM AND DRY ROOF HO HO HO HO HO HO WATERTIGHTNESS The FAKRO Company offers a wide range of membranes and underlays

More information

Firestone RubberGard The EPDM reference

Firestone RubberGard The EPDM reference Firestone RubberGard The EPDM reference EPDM Roofing Systems 1.000.000.000 m 2 of proven performance The Firestone heritage of success and quality is extended to the construction industry through the Firestone

More information

System 5000 FLAME-FREE, FELT SYSTEM, INSTALLED USING HOT AIR, TOTALLY ELIMINATING FIRE RISK AND PROVIDING A BITUMEN ALTERNATIVE TO SINGLE PLY

System 5000 FLAME-FREE, FELT SYSTEM, INSTALLED USING HOT AIR, TOTALLY ELIMINATING FIRE RISK AND PROVIDING A BITUMEN ALTERNATIVE TO SINGLE PLY CI/SfB Oct 12 (47) Ln Uniclass L524 FLAME-FREE, FELT SYSTEM, INSTALLED USING HOT AIR, TOTALLY ELIMINATING FIRE RISK AND PROVIDING A BITUMEN ALTERNATIVE TO SINGLE PLY Bailey Flame-free felt roofing Bailey

More information

Georgia State University. Urban Life Building Roof Replacement

Georgia State University. Urban Life Building Roof Replacement ENGINEERING AND ENVIRONMENTAL 140 DECATUR STREET SE, ATLANTA, GA 30303 GEORGIA STATE UNIVERSITY - FACILITIES DESIGN & CONSTRUCTION 34 BROAD STREET, SUITE 100 ATLANTA, GA 30303 DRAWING INDEX A-0 PROJECT

More information

SECTION 07560 FLUID APPLIED ROOFING (LIGHT TRAFFIC DECKS OVER CONCRETE)

SECTION 07560 FLUID APPLIED ROOFING (LIGHT TRAFFIC DECKS OVER CONCRETE) SECTION 07560 FLUID APPLIED ROOFING (LIGHT TRAFFIC DECKS OVER CONCRETE) PART 1 GENERAL 1.1 DESCRIPTION 1. Fluid applied flexible acrylic waterproofing system over concrete. This work shall include the

More information

TECHNOELAST ROOF WATERPROOFING MEMBRANES TECHNOELAST APP EPP AND TECHNOELAST APP EKP ROOF WATERPROOFING MEMBRANES

TECHNOELAST ROOF WATERPROOFING MEMBRANES TECHNOELAST APP EPP AND TECHNOELAST APP EKP ROOF WATERPROOFING MEMBRANES TechnoNicol-Vyborg Ltd Ruberoidnaya St 7 Leningradskaya Region Vyborg 188804 Russia Tel: 007 81378 39090 Fax: 007 81378 39091 e-mail: sales@vbg.tn.ru website: www.tn-europe.com APPROVAL INSPECTION TESTING

More information

European Technical Assessment ETA-16/0277 of 19/05/2016

European Technical Assessment ETA-16/0277 of 19/05/2016 ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011

More information

DENSO WATERPROOFING SYSTEMS

DENSO WATERPROOFING SYSTEMS DENSO WATERPROOFING SYSTEMS Approved Quality Management System AS/NZS ISO 9001:2008 Lloyds Register Certificate N o Mel 0927759 Denso (Australia) Pty Ltd A MEMBER OF WINN & COALES INTERNATIONAL 411 413

More information

1. Adhered KEE membrane roofing system. 2. Mechanically fastened KEE membrane roofing system.

1. Adhered KEE membrane roofing system. 2. Mechanically fastened KEE membrane roofing system. SECTION 075416 - PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Adhered KEE membrane roofing system. 2. Mechanically fastened KEE membrane roofing system. 1.2 PERFORMANCE REQUIREMENTS A. Solar Reflectance

More information

European Technical Approval ETA-13/0333 Eurooppalainen tekninen hyväksyntä

European Technical Approval ETA-13/0333 Eurooppalainen tekninen hyväksyntä ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC

More information

Re-Cover Board-3. Insulation for Above the Deck ROOF WALL SPECIALTY

Re-Cover Board-3. Insulation for Above the Deck ROOF WALL SPECIALTY Insulation for Above the Deck WALL SPECIALTY PRODUCT DESCRIPTION Rmax Re-Cover Board-3 is an energy-efficient thermal insulation board composed of a closed-cell polyisocyanurate (polyiso) foam core bonded

More information

Document type: Practice Note Title: External and internal membranes Document number: AC2234 Version: 5. 1. Purpose

Document type: Practice Note Title: External and internal membranes Document number: AC2234 Version: 5. 1. Purpose Document type: Practice Note Title: External and internal membranes Document number: AC2234 Version: 5 1. Purpose The purpose of this practice note is to address the incidence of deck and roof membrane

More information

RENOLIT ROOF WATERPROOFING MEMBRANES ALKORPLAN ROOF WATERPROOFING MEMBRANES

RENOLIT ROOF WATERPROOFING MEMBRANES ALKORPLAN ROOF WATERPROOFING MEMBRANES Renolit Cramlington Ltd Station Road Cramlington Northumberland NE23 8AQ Tel: 01670 718283 Fax: 01670 590096 e-mail: sheila.bevan@renolit.com website: www.alkorproof.com APPROVAL INSPECTION TESTING CERTIFICATION

More information

EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS

EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS 1. SCOPE 1.1 This specification covers the type, physical properties and dimensions of Expanded Polystyrene Insulation Board intended for use

More information

FATRA ROOF COVERING SYSTEMS FATRAFOL FF807 AND FATRAFOL FF807/V ROOF COVERING SYSTEMS

FATRA ROOF COVERING SYSTEMS FATRAFOL FF807 AND FATRAFOL FF807/V ROOF COVERING SYSTEMS Fatra UK Ltd Unit 12 The Timber Yard East Moors Road Ocean Park Cardiff CF24 5EE Tel: 029 2048 7954 Fax: 029 2048 9226 e-mail: sales@fatra.co.uk website: www.fatra.co.uk FATRA ROOF COVERING SYSTEMS APPROVAL

More information

07 5423-1 THERMOPLASTIC-POLYOLEFIN ROOFING (TPO) Data Center

07 5423-1 THERMOPLASTIC-POLYOLEFIN ROOFING (TPO) Data Center PART 1 GENERAL 1.01 SECTION INCLUDES SECTION 07 5423 THERMOPLASTIC-POLYOLEFIN ROOFING (TPO) Data Center A. Tear off existing roof system down to wood deck and install new Thermoplastic membrane roofing

More information

This European technical approval

This European technical approval ÖSTERREICHISCHES I N S T I T U T F Ü R B A U T E C H N I K A-1010 Vienna, Schenkenstrasse 4 Tel.: + 4 3 ( 0 ) 1-5 3 3 6 5 5 0 Fax: + 4 3 ( 0 ) 1-5 3 3 6 4 2 3 relating to construction products E - m a

More information

Regulations Detail Sheet 1

Regulations Detail Sheet 1 Designated by Government to issue European Technical Approvals Esha (UK) Ltd Esha House St Mary s Business Park Albany Road Market Harborough Leicestershire LE16 7EB Tel: 01858 410372 Fax: 01858 410572

More information

Section 5.0. Basements. Wall insulated externally. Wall insulated internally. Ba02. Product: Polyfoam ECO Floorboard Ba01.

Section 5.0. Basements. Wall insulated externally. Wall insulated internally. Ba02. Product: Polyfoam ECO Floorboard Ba01. Section 5.0 Basements Wall insulated externally Product: Polyfoam ECO Ba01 Wall insulated internally Product: Polyfoam ECO Ba02 Basements Basements Basement design Waterproofing BS 8102: 2009 Code of practice

More information