Germany WAGO Kontakttechnik Minden Tel / Fax /

Transcription

1

2 Germany WAGO Kontakttechnik Minden Tel / Fax / Austria WAGO Kontakttechnik GmgH Wien Tel. ++43/1/ Fax ++43/1/ Belgium WAGO Kontakttechnik Zaventem Tel. ++32/2/ Fax ++32/2/ China WAGO ELECTRONIC Co. Ltd. Tianjin Tel. ++86/22/ /64/74 Fax ++86/22/ England WAGO, Ltd. Rugby Tel. ++44/1788/ Fax ++44/1788/ France WAGO CONTACT SA. Paris Tel. ++33/ Fax ++33/ / Rev.2 Printed in the United States Italy WAGO ELETTRONICA SRL San Lazzaro di Savena (BO) Tel. ++39/051/ Fax ++39/051/ Japan WAGO Co. of JAPAN Ltd. Tokyo Tel. ++81/3/3254/8881 Fax ++81/3/3254/8885 Poland WAGO ELWAG sp. z o. o. Wroclaw Tel. ++48/71/ Fax ++48/71/ Singapore WAGO Electronic Pte. Ltd. Singapur Tel. ++65/ Fax ++65/ Switzerland WAGO CONTACT SA Domdidier Tel. ++65/ Fax ++65/ Mexico WAGO Corporation Tel (55) Fax + 52-(55) Canada WAGO Corporation Tel. 800 / DIN Rail ( ) Fax 262 / WAGO Corporation N120 W19129 Freistadt Road Germantown, Wisconsin Telephone: 800 / DIN Rail ( ) Fax: 262 / info@wago.com

3 A-B compatible interface modules Connect with CAGE CLAMP

4 2 Interface modules for Allen-Bradley PLC Platforms Connect with CAGE CLAMP Wiring systems for PLC I/O cards have been reducing wiring time, eliminating errors, and adding functionality for many years. Now, with the WAGO interface modules, users gain the added functionality and benefits of wiring with CAGE CLAMP for field side connections. For over 25 years, CAGE CLAMP has proven itself as a highly reliable connection technology vibration-proof connection technology corrosion resistant connection technology thermal-cycling resistant connection technology that is up to 60% faster than wiring with screw-type technology. Interface modules feature WAGO CAGE CLAMP connection technology for a fast, reliable connection - everytime! The System Overview Pluggable connection to the PLC via pre-fab cables D-sub (analog) and Ribbon (digital). Available with built-in functions such as LED, fuse, relay, diode, etc. Write on marker surface on the PCB. DIN Rail mounting for ease of installation/ retro-fit. CAGE CLAMP wiring with large marker strip surface.

5 3 Support for A-B PLC I/O Cards: PLC-5 Bulletin 1771 SLC-500 Bulletin 1746 ControlLogix Bulletin 1756 CompactLogix Bulletin 1769 and MicroLogix 1500 Why use WAGO? Cost effective As the manufacturer of the PCB carrier and terminal blocks we are able to better control the cost base with savings up to 40% or more. Compact design WAGO interface modules are typically more compact than that of the PLC manufacturer even with extra termination points. Greater reliability As the inventor of CAGE CLAMP, we have more than 25 years of experience integrating this technology into automation components. Reduced wiring time Not only is your PLC to the terminal block wiring up to 30 times faster, but now, with CAGE CLAMP, your terminal block to field device wiring is up to 60% faster - compared to screw-type connections. Maintenance-free wiring CAGE CLAMP is vibration-proof, as well as thermal cycling and corrosion resistant wire it once and forget it. 100% A-B compatible We are pin to pin compliant with A-B. Buy the cable and interface module from WAGO or just buy the WAGO interface module and use the A-B cable your choice. WAGO interface modules are functionally compatible with the AB interface modules. Some models may have additional terminals available for your wiring convenience. Terminal positions and component types and locations may not be indentical to the AB interface modules. Complete marking All WAGO interface modules come with a marker card to mark the terminal block I/O points according to the PLC type you are using, as well as additional marking surface on the PCB. Connector Buy-Back Not using your RTBs (removable terminal block, a.k.a. wiring arm)? WAGO will issue credit/ buy back these when you purchase both the cable and interface module from us. Custom capabilities Don t see what you want? WAGO will custom design a solution to meet your needs. Requirements in most cases are as little as 50 pieces with little or no NRE fees.

6 4 SLC-500 Bulletin 1746 compatible modules I SLC-500 Digital I/O Interface Modules, (20 pin versions) Feed through, standard, 264 V AC/DC Max IFM20F A B B E B A B B Feed through, narrow, V AC/DC Max IFM20FN A B B E B - B B Feed through, 3-wire sensor-type, 132 V AC/DC Max IFM20F A B B E B - B B Feed through, 3-wire sensor-type, V AC/DC Max IFM20D B B B Feed through, 120 V AC LEDS, 4 terminals/output, V AC Max IFM20DS Feed through, individually isolated, 24/48 V ACDC LEDS, V AC/DC Max IFM20DS Feed through, extra terminals, V AC/DC Max IFM20F A B B E B A B B LED, standard w/24 V AC/DC LEDs, V AC/DC Max IFM20D B B B LED, narrow, w/ 24 V AC/DC LEDs, V AC/DC Max IFM20D24N B B B LED, standard, w/ 120 V AC/DC LEDs, V AC Max IFM20D A B LED, narrow, w/ 120 V AC/DC LEDs, V AC Max IFM20D120N A LED, extra output terminals, w/ 120 V AC/DC LEDs, V AC Max IFM20D LED, extra input terminals, w/ 120 V AC/DC LEDs, V AC Max IFM20D120A A LED, 4 terminals per output, w/ 120 V AC/DC LEDs, V AC Max IFM20DS LED, extra output terminals, w/ 24 V AC/DC LEDs V AC/DC Max IFM20D LED, extra input terminals, w/24 V AC/DC LEDs V AC/DC Max IFM20D24A B B B Fusible, extra terminals, w/24 V AC/DC B/F ind., V AC/DC Max IFM20F-F Fusible, extra terminals, w/120 V AC/DC B/F ind., V AC/DC Max IFM20F-F Fusible, extra output terminals, V AC/DC Max IFM20F-F Fusible, individually isolated, extra output terminals, V AC/DC Max IFM20F-FS Fusible, individually isolated, 24 V AC/DC B/F ind., V AC/DC Max IFM20F-FS Fusible, 4 terminals/input, 24 V AC/DC B/F ind., V AC/DC Max IFM20F-FS24A Fusible, individually isolated, 120 V AC/DC B/F ind., V AC/DC Max IFM20F-FS Relay, 20 pin master w/ eight 24 V relays, V DC Max XIM2024-8R Relay, 20 pin master w/ eight 120 V relays, V AC Max XIM R Relay, expander w/ eight 24 V relays, V DC Max XIM24-8R Relay, expander w/ eight 120 V relays, V AC Max XIM120-8R Relay, 20 pin master w/ sixteen 24 V relays, V DC Max XIM R Relay, 20 pin master w/ sixteen 120 V relays V AC Max XIM R Relay, 20 pin master w/ sixteen 24 V relays, fused contacts V DC Max XIM RF Relay, 20 pin master w/ sixteen 120 V relays, fused contacts V AC Max XIM R IA16 IB16 IC16 IG16 IH16 I/O card types: IM16 IN16 SLC-500 Digital I/O Interface Modules, (40 pin versions) Feed through, standard, V AC/DC Max IFM40F H H H H H Feed through, 3-wire sensor-type, 0-60 V AC/DC Max IFM40F H H Feed through, extra terminals, 132 V AC/DC max., V AC/DC Max IFM40F H H H H H Feed through, 3-wire sensor-type, 24 V AC/DC LEDs, V DC Max IFM40D H H LED, standard w/24 V AC/DC LEDs, V AC/DC Max IFM40D H H H H H LED, extra output terminals, w/ 24 V AC/DC LEDs, V AC/DC Max IFM40D H H H LED, extra input terminals, w/ 24 V AC/DC LEDs, V AC/DC Max IFM40D24A H H Fusible, extra terminals, w/24 V AC/DC B/F indicators, V AC/DC Max IFM40F-F H H H Fusible, isolated, 24 V AC/DC B/F indicators, V AC/DC Max IFM40F-FS24A Relay, 40 pin master w/ sixteen 24 V relays, V DC Max XIM R H H - IB32 IV32 OB32 OB32E OV32 I/O Card Types: SLC-500 Analog interface input/output boards Feed through, 4-channel w/3 terminals/channel V AC/DC Max AIFM L L A - L L B B Feed through, 6-channel isolated w/3..4 terminals/chan V AC/DC Max AIFM6S Feed through, 8-channel w/3 terminals/channel V AC/DC Max AIFM C Feed through, 4-channel w/5 terminals/channel V DC Max AIFM4I-F A Feed through, 2-channel in/2-channel out, 3 terminals/channel V DC Max AIFM4C-F L L - - L L - - Fusible, 8-channel w/5 terminals/channel 0-30 V AC/DC Max AIFM8-F C Fusible, 16-channel w/3 terminals/channel 0-30 V AC/DC Max AIFM16-F One expander is connected to a master to provide a total of 16 outputs. An extender cable is included with each expander to attach it to the master. 2 Narrow and standard modules can be used interchangeably. FIO4I FIO4V NI4 NI8 NIO4I NIO4V NO4I NO4V

7 5 ITB16 ITV16 IV16 OA16 OB16 OB16E OBP16 OG16 OV16 OVP16 OW16 OX8 B B C E E E E E E D D B B G E E E E E E N N B B B B - S - S B B C E E E E E E D - B B - E E E - E E D - B B - E E E N C D G N C D S E E E - E E D - B B E E E - E E D C D C E E E - E E D - - S - S S E E E CR E E E CR E E E CR SLC-500 Bulletin 1746 How to pick an interface module 1) Use chart to cross-reference by A-B IFM part number. Example, 1492-IFM20F = WAGO part number ) Use chart to choose by PLC and I/O card type. Example, 1746-IA16 (1746 = PLC type SLC-500 and IA16 = I/O card) equals WAGO part number ) Use chart to choose cable type required (note: WAGO interface modules are 100% compatible with A-B cable program, 1492-CABLE). Example, WAGO part number (from above example) follow to the right until you locate the I/O card type, IA16. This intersection indicates cable type A. Go to catalog page 12 and under digital I/O cables cable type A offers 4 different part numbers depending on the cable length. The part number for cable type A at a length of 0.5 meters would be /O card types: NO8I NO8V NR4 NI16I NI16V D - - R R - A46 A A46 A46 All standard sizes available ( shown)

8 I/O c 6 ControlLogix Bulletin 1756 compatible modules I/O card types ControlLogix Digital I/O Interface Modules, (20 pin versions) Feed through, standard, 264 V AC/DC Max IFM20F U X X X X X U U Feed through, narrow, V AC/DC Max IFM20FN U X X X X X U U Feed through, 3-wire sensor-type, 132 V AC/DC Max IFM20F X X X X X - - Feed through, 3-wire sensor-type, 24 V AC/DC LEDs V AC/DC Max IFM20D X - X X - - Feed through, individually isolated, 24/48 V AC/DC LEDs V AC/DC Max IFM20DS Feed through, extra terminals, V AC/DC Max IFM20F U X X X X X U U Feed through, 120 V AC LEDS, 4 terminals per output, V AC/DC Max IFM20DS W V LED, standard w/24 V AC/DC LEDs, V AC/DC Max IFM20D X - X X - - LED, narrow, w/ 24 V AC/DC LEDs, V AC/DC Max IFM20D24N X - X X - - LED, standard, w/ 120 V AC/DC LEDs, V AC Max IFM20D U X LED, narrow, w/ 120 V AC/DC LEDs, V AC Max IFM20D120N U X LED, extra output terminals, w/ 120 V AC/DC LEDs, V AC Max IFM20D LED, extra input terminals, w/ 120 V AC/DC LEDs, V AC Max IFM20D120A U X LED, 4 terminals per output, w/ 120 V AC/DC LEDs, V AC Max IFM20DS W V LED, extra output terminals, w/ 24 V AC/DC LEDs V AC/DC Max IFM20D LED, extra input terminals, w/24 V AC/DC LEDs V AC/DC Max IFM20D24A X - X X - - Fusible, extra terminals, w/24 V AC/DC B/F indicators, V AC/DC Max IFM20F-F Fusible, extra terminals, w/120 V AC/DC B/F indicators, V AC/DC Max IFM20F-F Fusible, extra output terminals, V AC/DC Max IFM20F-F Fusible, isolated, 120 V AC/DC B/F indicators, V AC/DC Max IFM20F-FS120A U Fusible, individually isolated, extra output terminals, V AC/DC Max IFM20F-FS W V Fusible, individually isolated, 24 V AC/DC B/F indicators, V AC/DC Max IFM20F-FS Fusible, 4 terminals per input, 24 V AC/DC B/F indicators, V AC/DC Max IFM20F-FS24A Fusible, individually isolated, 120 V AC/DC B/F indicators, V AC/DC Max IFM20F-FS W V Relay, 20 pin master w/ eight 24 V relays, V DC Max XIM2024-8R Relay, 20 pin master w/ eight 120 V relays, V AC Max XIM R Relay, expander w/ eight 24 V relays, V DC Max XIM24-8R Relay, expander w/ eight 120 V relays, V AC Max XIM120-8R Relay, 20 pin master w/ sixteen 24 V relays, V DC Max XIM R Relay, 20 pin master w/ sixteen 120 V relays, V AC Max XIM R Relay, 20 pin master w/ sixteen 24 V relays, fused contacts V DC Max XIM RF Relay, 20 pin master w/ sixteen 120 V relays, fused contacts V AC Max XIM RF IA8D IA16 IB16 IC16 IN16 IV16 OA8 ControlLogix Digital I/O Interface Modules, (40 pin versions) Feed through, standard, V AC/DC Max IFM40F Y Z Y Y Z Y - Z Feed through, 3-wire sensor-type, 0-60 V AC/DC Max IFM40F Z - - Z Feed through, extra terminals, 132 V AC/DC Max V AC/DC Max IFM40F Z Y - Z - - Z Feed through, 3-wire sensor-type, 24 V AC/DC LEDs V AC/DC Max IFM40D Z - - Z Fusible, extra terminals, w/24 V AC/DC B/F indicators, V AC/DC Max IFM40F-F Fusible, extra terminals, w/120 V AC/DC B/F indicators, V AC/DC Max IFM40F-FS Fusible, isolated, 24 V AC/DC B/F indicators, V AC/DC Max IFM40F-FS24A Y LED, standard w/24 V AC/DC LEDs, V AC/DC Max IFM40D Z - - Z LED, extra output terminals, w/ 24 V AC/DC LEDs, V AC/DC Max IFM40D LED, extra input terminals, w/ 24 V AC/DC LEDs, V AC/DC Max IFM40D24A Z - - Z Relay, 40 pin master w/ sixteen 24 V relays, V DC Max XIM R IA16I IA32 IB16D IB16I IB32 IH16I IM16I IV32 ControlLogix Analog interface input/output boards Feed through, 4-channel w/3 terminals/channel V AC/DC Max AIFM Feed through, 6-channel isolated w/3..4 terminals/chan V AC/DC Max AIFM6S X Y Feed through, 8-channel w/3 terminals/channel V AC/DC Max AIFM TA TB TC TD Fusible, 8-channel w/5 terminals/channel 0-30 V AC/DC Max AIFM8-F TA TB TC TD Fusible, 16-channel w/3 terminals/channel 0-30 V AC/DC Max AIFM16-F Fusible, 16-channel w/5 terminals/channel 0-30 V AC/DC Max AIFM16-F One expander is connected to a master to provide a total of 16 outputs. An extender cable is included with each expander to attach it to the master. 2 Narrow and standard modules IF6I (Current) IF6I (Voltage) IF8 (Voltage SE) IF8 (Current SE) IF8 (Voltage DIF)

9 7 : ard types: OA16I OB8EI OB16D OB16I OB16IS OB32 OH8I OV32E OW16I OX8I OA8D OA8E OA16 OB8 OB16E OC8 ON8 OV16E U X U X U U X U X U X U U X W - W W - U X U X U U X V X X - - X X X V X - - X X - - X - X X - X - - X V - W - W W W - W W V X X X X ControlLogix Bulletin 1756 How to pick an interface module 1) Use chart to cross-reference by A-B IFM part number. Example, 1492-IFM20F = WAGO part number ) Use chart to choose by PLC and I/O card type. Example, 1756-IA16 (1756 = PLC type ControlLogix and IA16 = I/O card) equals WAGO part number ) Use chart to choose cable type required (note: WAGO interface modules are 100% compatible with A-B cable program, 1492-CABLE). Example, WAGO part number (from above example) follow to the right until you locate the I/O card type, IA16. This intersection indicates cable type X. Go to catalog page 12 and under digital I/O cables cable type X offers 4 different part numbers depending on the cable length. The part number for cable type X at a length of 0.5 meters would be Y Y Y Y Y Z Y Z Y Y Y - - Z - Z Z - Z - - Y Y - Y Y Z - Z Z - Z Z Compact design ( shown) I/O Card Types: IF8 (Current DIF) IF16 (Voltage SE) IF16 (Current SE) IF16 (Voltage DIF) IF16 (Current DIF) IR6I IT6I IT6I VA VB Z Y Y - - UA UB UC UD WA WB - - UC UD UA UB UC UD UA UB UC UD can be used interchangeably. OF4 (Voltage) OF4 (Current) OF6CI OF6VI OF8 (Voltage) OF8 (Current)

10 I/O card type 8 CompactLogix Bulletin 1769 and MicroLogix 1500 compatible modules CompactLogix/MicroLogix Digital I/O Interface Modules, (20 pin versions) Feed through, standard, 264 V AC/DC Max IFM20F F69 A69 B69 B69 G69 C69 Feed through, narrow, V AC/DC Max IFM20FN F69 A69 B69 B69 - C69 Feed through, 3-wire sensor-type, 132 V AC/DC Max IFM20F A69 B69 B Feed through, 3-wire sensor-type, 24 V AC/DC LEDs V AC/DC Max IFM20D B69 B Feed through, 120 V AC LEDs, 4 terminals per output, V AC Max IFM20DS C69 Feed through, individually isolated, 24/48 V AC/DC LEDs, V AC/DC Max IFM20DS Feed through, extra terminals, V AC/DC Max IFM20F A69 B69 B69 G69 C69 LED, standard w/24 V AC/DC LEDs, V AC/DC Max IFM20D B69 B LED, narrow, w/ 24 V AC/DC LEDs, V AC/DC Max IFM20D24N B69 B LED, standard, w/ 120 V AC/DC LEDs, V AC Max IFM20D A LED, narrow, w/ 120 V AC/DC LEDs, V AC Max IFM20D120N A LED, extra output terminals, w/ 120 V AC/DC LEDs, V AC Max IFM20D LED, extra input terminals, w/ 120 V AC/DC LEDs, V AC Max IFM20D120A A LED, 4 terminals per output, w/ 120 V AC/DC LEDs, V AC Max IFM20DS C69 LED, extra output terminals, w/ 24 V AC/DC LEDs V AC/DC Max IFM20D LED, extra input terminals, w/24 V AC/DC LEDs V AC/DC Max IFM20D24A B69 B Fusible, extra terminals, w/24 V AC/DC B/F indicators, V AC/DC Max IFM20F-F Fusible, extra terminals, w/120 V AC/DC B/F indicators, V AC/DC Max IFM20F-F Fusible, extra output terminals, V AC/DC Max IFM20F-F Fusible, individually isolated, extra output terminals, V AC/DC Max IFM20F-FS C69 Fusible, individually isolated, 24 V AC/DC B/F indicators, V AC/DC Max IFM20F-FS Fusible, 4 terminals per input, 24 V AC/DC B/F indicators, V AC/DC Max IFM20F-FS24A Fusible, individually isolated, 120 V AC/DC B/F indicators, V AC/DC Max IFM20F-FS C69 Relay, 20 pin master w/ eight 24 V relays, V DC Max XIM2024-8R Relay, 20 pin master w/ eight 120 V relays, V AC Max XIM R Relay, expander w/ eight 24 V relays, V DC Max XIM24-8R Relay, 20 pin master w/ sixteen 24 V relays, V DC Max XIM R Relay, 20 pin master w/ sixteen 120 V relays, V AC Max XIM R Relay, 20 pin master w/ sixteen 24 V relays, fused contacts V AC Max XIM RF Relay, 20 pin master w/ sixteen 120 V relays, fused contacts V AC Max XIM RF IA8I IA16 IQ16 IQ16F I/O card types: IM12 OA8 CompactLogix Digital I/O Interface Modules, (40 pin versions) Feed through, standard, V AC/DC Max IFM40F J69 K69 H H Feed through, 3-wire sensor-type, 0-60 V AC/DC Max IFM40F J69 - H - Feed through,extra terminals, 132 V AC/DC Max., V AC/DC Max IFM40F J69 K69 H H Feed through, 3-wire sensor-type, 24 V AC/DC LEDs V AC/DC Max IFM40D J69 - H - LED, standard w/24 V AC/DC LEDs, V AC/DC Max IFM40D J69 K69 H H LED, extra output terminals, w/ 24 V AC/DC LEDs, V AC/DC Max IFM40D K69 - H LED, extra input terminals, w/ 24 V AC/DC LEDs, V AC/DC Max IFM40D24A J69 - H - Fusible, extra terminals, w/24 V AC/DC B/F indicators, V AC/DC Max IFM40F-F K69 - H Fusible, isolated, 24 V AC/DC B/F indicators, V AC/DC Max IFM40F-FS24A Relay, 40 pin master w/ sixteen 24 V relays, V DC Max XIM R K69 - H IQ32 OB32 IQ32T OB32T I/O Card Types: CompactLogix Analog interface input/output boards Feed through, 4-channel w/3 terminals/channel V AC/DC Max AIFM AA69 AB69 BA69 BB69 BC69 Feed through, 6-channel isolated w/3..4 terminals/chan V AC/DC Max AIFM6S Feed through, 8-channel w/3 terminals/channel V AC/DC Max AIFM Feed through, 4-channel w/5 terminals/input, 3 terminals/output V DC Max AIFM4I-F BA69 BB69 BC69 Fusible, 8-channel w/5 terminals/channel 0-30 V AC/DC Max AIFM8-F OF2 (Voltage) OF2 (Current) IF4 (Voltage SE) IF4 (Current SE) IF4 (Voltage DIF) 1 One expander is connected to a master to provide a total of 16 outputs. An extender cable is included with each expander to attach it to the master. 2 Narrow and standard modules can be used interchangeably.

11 9 s: I/O card types: OA16 OB16 OV16 OW8 OW8I OW16 AWA-I BWA-I BSB-O AWA-O BWA-O BXB-O M69 E69 E69 C69 D69 M69 A64 A64 B64 C64 C64 F64 M69 E69 E69 C69 - M69 A64 A64 B64 C64 C64 F C69 D C69 D H69 E69 E69 C69 - H E69 E M E H M M H H M M C69 C E69 E M E69 E M M M M69 E69 E M C69 D C69 D C69 D E69 - H E69 - H E69 - H CompactLogix Bulletin 1769 and MicroLogix1500 How to pick an interface module 1) Use chart to cross-reference by A-B IFM part number. Example, 1492-IFM20F = WAGO part number ) Use chart to choose by PLC and I/O card type. Example, 1769-IA16 (1769 = PLC type CompactLogix and IA16 = I/O card) equals WAGO part number ) Use chart to choose cable type required (note: WAGO interface modules are 100% compatible with A-B cable program, 1492-CABLE). Example, WAGO part number (from above example) follow to the right until you locate the I/O card type, IA16. This intersection indicates cable type A69. Go to catalog page 12 and under digital I/O cables cable type A69 offers 4 different part numbers depending on the cable length. The part number for cable type A69 at a length of 0.5 meters would be IF4 (Current DIF) IF8 (Voltage SE) IF8 (Current SE) IF8 (Voltage DIF) IF8 (Current DIF) IR6 OF8V (Voltage) OF8C (Current) BD C EA69 EB69 EC69 ED69 - D69 D69 BD EA69 EB69 EC69 ED wire sensor type available ( shown)

12 I/O Card Types: 1 10 PLC-5 Bulletin 1771 compatible modules I/O ca PLC-5 Digital I/O Interface Modules, (20 pin versions) Feed through, standard, 264 V AC/DC Max IFM20F F - F F F F Feed through, narrow, V AC/DC Max IFM20FN F - F F F - Feed through, 3-wire sensor-type, 132 V AC/DC Max IFM20F F - F F F - Feed through, 3-wire sensor-type, 24 V AC/DC LEDs V AC/DC Max IFM20D F F - - Feed through, 120 V AC LEDs, 4 terminals per output, V AC Max IFM20DS Feed through, extra terminals, V AC/DC Max IFM20F F - F F F F LED, standard w/24 V AC/DC LEDs, V AC/DC Max IFM20D F F - - LED, narrow, w/ 24 V AC/DC LEDs, V AC/DC Max IFM20D24N F F - - LED, standard, w/ 120 V AC/DC LEDs, V AC Max IFM20D F LED, narrow, w/ 120 V AC/DC LEDs, V AC Max IFM20D120N F LED, extra output terminals, w/ 120 V AC/DC LEDs, V AC Max IFM20D LED, extra input terminals, w/ 120 V AC/DC LEDs, V AC Max IFM20D120A F LED, extra output terminals, w/ 24 V AC/DC LEDs V AC/DC Max IFM20D LED, extra input terminals, w/24 V AC/DC LEDs V AC/DC Max IFM20D24A F F - - Fusible, extra terminals, w/24 V AC/DC B/F indicators, V AC/DC Max IFM20F-F Fusible, extra terminals, w/120 V AC/DC B/F indicators, V AC/DC Max IFM20F-F Fusible, extra output terminals, V AC/DC Max IFM20F-F Fusible, isolated, 120 V AC/DC B/F indicators, V AC/DC Max IFM20F-FS120A T T Fusible, individually isolated, extra output terminals, V AC/DC Max IFM20F-FS Fusible, individually isolated, 24 V AC/DC B/F indicators, V AC/DC Max IFM20F-FS Fusible, 4 terminals per input, 24 V AC/DC B/F indicators, V AC/DC Max IFM20F-FS24A T Fusible, individually isolated, 120 V AC/DC B/F indicators, V AC/DC Max IFM20F-FS Relay, 20 pin master w/ eight 24 V relays, V DC Max XIM2024-8R Relay, 20 pin master w/ eight 120 V relays, V AC Max XIM R Relay, expander w/ eight 24 V relays, V DC Max XIM24-8R Relay, expander w/ eight 120 V relays, V AC Max XIM120-8R Relay, 20 pin master w/ sixteen 24 V relays, V DC Max XIM R Relay, 20 pin master w/ sixteen 120 V relays, V AC Max XIM R Relay, 20 pin master w/ sixteen 24 V relays, fused contacts, V DC Max XIM RF Relay, 20 pin master w/ sixteen 120 V relays, fused contacts, V AC Max XIM RF IA IA2 IAD IB IBD ICD IGD IMD I/O card types: PLC-5 Digital I/O Interface Modules, (40 pin versions) Feed through, standard, V AC/DC Max IFM40F J J M M K L L M Feed through, 3-wire sensor-type, 0-60 V AC/DC Max IFM40F J - - K Feed through, extra terminals, 132 V AC/DC Max., V AC/DC Max IFM40F J J - - K L L - Feed through, 3-wire sensor-type, 24 V AC/DC LEDs V AC/DC Max IFM40D J - - K LED, standard w/24 V AC/DC LEDs, V AC/DC Max IFM40D J - - K - L - LED, extra output terminals, w/ 24 V AC/DC LEDs, V AC/DC Max IFM40D L - LED, extra input terminals, w/ 24 V AC/DC LEDs, V AC/DC Max IFM40D24A J - - K Fusible, extra terminals, w/24 V AC/DC B/F indicators, V AC/DC Max IFM40F-F L - Fusible, extra terminals, w/120 V AC/DC B/F indicators, V AC/DC Max IFM40F-F L - - Fusible, isolated, 24 V AC/DC B/F indicators, V AC/DC Max IFM40F-FS24A M Relay, 40 pin master w/ sixteen 24 V relays, V DC Max XIM R L - IAN IBN ID16 IQ16 IVN OAN OBN OD16 PLC-5 Analog interface input/output boards Feed through, 4-channel w/3 terminals/channel V AC/DC Max AIFM Feed through, 6-channel isolated w/3..4 terminals/chan V AC/DC Max AIFM6S Feed through, 8-channel w/3 terminals/channel V AC/DC Max AIFM E F E F H Fusible, 8-channel w/5 terminals/channel 0-30 V AC/DC Max AIFM8-F E - E - - Fusible, 16-channel w/3 terminals/channel 0-30 V AC/DC Max AIFM16-F F - F - Fusible, 16-channel w/5 terminals/channel 0-30 V AC/DC Max AIFM16-F F - F - 1 One expander is connected to a master to provide a total of 16 outputs. An extender cable is included with each expander to attach it to the master. 2 Either F or FF. 3 Narrow and standard modules can be used interchangeably. IFE (DIF) IFE (SE) IFF (DIF) IFF (SE) IL

13 IR OFE1 OFE2 OFE3 IN IND IT OAD OBD OGD OMD OND IH - F F F F F F F F F F F F F F - - F F F F - - F - T - T T rd types: ODD OQ16 OVN OW16 OWN OWNA PLC-5 Bulletin 1771 How to pick an interface module 1) Use chart to cross-reference by A-B IFM part number. Example, 1492-IFM20F = WAGO part number ) Use chart to choose by PLC and I/O card type. Example, 1771-IA16 (1771 = PLC type PLC-5 and IAD = I/O card) equals WAGO part number ) Use chart to choose cable type required (note: WAGO interface modules are 100% compatible with A-B cable program, 1492-CABLE). Example, WAGO part number (from above example) follow to the right until you locate the I/O card type, IAD. This intersection indicates cable type F. Go to catalog page 12 and under digital I/O cables cable type F offers 4 different part numbers depending on the cable length. The part number for cable type F at a length of 0.5 meters would be M M L R L L L R L L L - L L - - L - L L L - L L L L G G G J Pluggable and custom connectors available - consult factory

14 12 Analog I/O Cables CABLE 0.5m 1.0m 2.5m 5.0m A B C D E F G H J L M Q R X Y YT Z A TA TB TC TD UA UB UC UD VA VB WA WB AA AB BA BB BC BD C D EA EB EC ED Digital I/O Cables CABLE 0.5m 1.0m 2.5m 5.0m A B C CR D E F FF G H J K L M N P Q R R S T U V W X Y Z A B C D E F G H J K L M TBNH TBCH

15 13 Labeling for WAGO Interface Modules All WAGO interface modules are provided with a label sheet as well as an instruction sheet. This serves to properly identify the field-side wiring of the interface module based on the PLC type and I/O card type. Example, PLC I/O card part number 1746-IA16 and using WAGO interface module part number Locate the PLC type, 1746, on the left hand side of the label key chart (on the instruction sheet). To the right of the PLC type, you will find the I/O card part number, 1746-IA16. To the right of the I/O card part number you will find a key indicating which label/s are needed to properly identify the field side terminals. In this case it is A and/or A1. With this information, select the A and/or A1 label strip from the provided label sheet, and apply to the bottom and top terminal strips. Note: the second row of terminals are extra terminals - it is not necessary to mark both rows of terminals. MODULE NO. KEY 1746-IA16, IM16, IN16(AC) A,A IB16, IC16, IH16, IN16(DC), ITB16 B,B IG16 C,C IV16, ITV16 D,D OA16, OW16(AC) E,E OB16, OB16E, OBP16, OG16, OV16, OVP16 F,F OW16(DC) G,G OX8(AC) H 1746-OX8(DC) I 1756-IA8D J 1756-IA16, IN16 K 1756-IB16, IC16 L 1756-IV16 M 1756-OA8, ON8 N OA8D, OA8E O 1756-OA16 P 1756-OB8,OC8 Q 1756-OB16E R 1769-IA8I S 1769-IA16 T 1769-IM12 U 1769-IQ16 SINK, IQ16F SINK V 1769-IQ16 SOURCE, IQ16F SOURCE W 1769-OA8(AC), OW8 X OA16, OW16(AC) Z 1769-OB16, OV16 F,F OW8(DC) Y 1769-OW8I(AC) H 1769-OW8I(DC) I 1769-OW16(DC) AA 1771-IAD(AC), IND(AC) AB 1771-IMD(AC) AC 1771-IAD(DC), IND(DC) AD IMD(DC) AE 1771-IBD,ICD AF 1771-IGD AG 1771-OAD, OND, OMD AH 1771-OBD, OGD AI Label Sheet Label Key Chart A-B, Allen Bradley, CompactLogix, ControlLogix, MicroLogix, PLC-5, and SLC-500 are either trademarks or registered trademarks of Rockwell Automation.