Cree XLamp XM-L HVW LEDs
|
|
|
- Victoria Richardson
- 7 years ago
- Views:
Transcription
1 ree XLamp XM-L HVW LEs Product family data sheet L-S rev 0 Product escription The ree XLamp XM-L High Voltage White LE provides the lightingclass performance and reliability of ree XLamp LEs in the standard XM package. The XM-L HVW LE is an order of magnitude smaller than other high-voltage LE arrays, allowing easy implementation of spaceconstrained lighting applications with smaller, more efficient high-voltage drivers. mong these applications are small lamps such as 0, GU0 and E7. FETURES inned at 8 Typical forward voltage of m, with Vf binning available ree-standard XM mechanical footprint, with electrically neutral thermal path Low thermal resistance:. /W Wide viewing angle: Maximum drive current: m Maximum junction temperature: 0 Unlimited floor life at 0 º/8% RH Reflow solderable vailable in standard RI and 80 minimum RI configurations Table of contents Flux haracteristics... haracteristics... Relative Spectral Power istribution... Relative Flux vs. Junction Temperature... Electrical haracteristics... Thermal esign... Relative Flux vs. urrent... Typical Spatial istribution... Reflow Soldering haracteristics... Mechanical imensions... 7 Tape and Reel... 8 Packaging... 9 www. cree.com/xlamp opyright 0 ree, Inc. ll rights reserved. The information in this document is subject to change without notice. ree, the ree logo and XLamp are registered trademarks of ree, Inc. ree, Inc. 00 Silicon rive urham, N 770 US Tel:
2 XLamp XM-l HVW LE Flux haracteristics (T J = 8 ) The following table provides several base order codes for XLamp XM-L LEs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XM-L inning and Labeling document. olor T Range ase Order odes Min Luminous m (lm) Order ode Min. Max. Group Flux (lm) ool White,000 K 8,00 K Neutral White,700 K,000 K Warm White,00 K,700 K T 0 XMLHVW-Q LT T 0 XMLHVW-Q LT S 8 XMLHVW-Q LSE T 00 XMLHVW-Q LTE S XMLHVW-Q LSE7 S 7 XMLHVW-Q LSE7 Notes: ree maintains a tolerance of ± 7% on flux and power measurements and ± on RI measurements. Typical RI for ool White (,000 K 8,00 K T) is 8. Typical RI for Neutral White (,700 K,000 K T) is 7. Typical RI for Warm White (,00 K,700 K T) is 8. haracteristics haracteristics Unit Minimum Typical Maximum Thermal Resistance, junction to solder point /W. Viewing ngle (FWHM) degrees Temperature coefficient of voltage mv/ - ES lassification (HM per Mil-Std-88) lass Forward urrent m Reverse urrent m 0. Forward voltage (@ m, 8 ) V LE Junction Temperature 0 opyright 0 ree, Inc. ll rights reserved. The information in this document is subject to change without notice. ree, the ree logo and XLamp are registered trademarks of ree, Inc.
3 XLamp XM-l HVW LE Relative Spectral Power Relative Spectral Power istribution 00 Relative Radiant Power (%) K - 800K T 00K - 700K T Wavelength (nm) Relative Flux Output vs. Junction Temperature Relative Flux vs. Junction Temperature (I F = m) 0% Relative Luminous Flux 00% 80% 0% 0% 0% 0% Junction Temperature (º) opyright 0 ree, Inc. ll rights reserved. The information in this document is subject to change without notice. ree, the ree logo and XLamp are registered trademarks of ree, Inc.
4 XLamp XM-l HVW LE Electrical Electrical haracteristics haracteristics (Tj = 8º) (T J = 8 ) 0 0 Forward urrent (m) Forward Voltage (V) Thermal esign Thermal esign 0 0 Maximum urrent (m) Rj-a = 0 /W Rj-a = /W Rj-a = 0 /W Rj-a = /W mbient Temperature (º) opyright 0 ree, Inc. ll rights reserved. The information in this document is subject to change without notice. ree, the ree logo and XLamp are registered trademarks of ree, Inc.
5 XLamp XM-l HVW LE Relative Intensity vs. urrent (Tj = 8º) Relative Flux vs. urrent (T J = 8 ) 0% Relative Luminous Flux (%) 00% 0% 00% 0% 0% Forward urrent (m) Typical Spatial Radiation Pattern Typical Spatial istribution 0 Relative Luminous Intensity (%) ngle (º) opyright 0 ree, Inc. ll rights reserved. The information in this document is subject to change without notice. ree, the ree logo and XLamp are registered trademarks of ree, Inc.
6 XLamp XM-l HVW LE Reflow Soldering haracteristics In testing, ree has found XLamp XM-L LEs to be compatible with JEE J-ST-00, using the parameters listed below. s a general guideline, ree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all P designs and configurations of reflow-soldering equipment. Profile feature Lead-based solder Lead-free solder verage ramp-up rate (Ts MX to Tp) /second max /second max Preheat: Temperature min (Ts MIN ) 00 0 Preheat: Temperature max (Ts MX ) 0 00 Preheat: Time (ts MIN to ts MX ) 0-0 seconds 0-80 seconds Time maintained above: temperature (TL) 8 7 Time maintained above: time (tl) 0-0 seconds 0-0 seconds Peak/classification temperature (Tp) 0 Time within of actual peak temperature (tp) 0-0 seconds 0-0 seconds Ramp-down rate /second max /second max Time to peak temperature minutes max 8 minutes max Note: ll temperatures refer to topside of the package, measured on the package body surface. opyright 0 ree, Inc. ll rights reserved. The information in this document is subject to change without notice. ree, the ree logo and XLamp are registered trademarks of ree, Inc.
7 XLamp XM-l HVW LE Mechanical imensions NOTIE REE ONFIENTIL. THIS PLOT N THE INFORMTION ONTINE WITHIN RE THE PROPRIETRY N ONFIENTIL INFORMTION OF REE, IN. THIS PLOT MY NOT E OPIE, REPROUE OR ISLOSE TO NY UNUTHORIZE PERSON WITHOUT THE WRITTEN ONSENT NOTIE OF REE REE ONFIENTIL. IN. THIS PLOT N THE INFORMTION ONTINE NOTIE WITHIN RE THE PROPRIETRY N REE ONFIENTIL. THIS INFORMTION PLOT N THE OF REE, INFORMTION IN. THIS PLOT ONTINE MY WITHIN NOT E RE OPIE, THE PROPRIETRY REPROUE N OR ISLOSE TO NY ONFIENTIL UNUTHORIZE INFORMTION PERSON OF REE, WITHOUT IN. THE THIS WRITTEN PLOT ONSENT MY NOT OF E REE OPIE, IN. REPROUE OR ISLOSE TO NY UNUTHORIZE PERSON WITHOUT THE WRITTEN ONSENT OF REE IN REVISONS REV ESRIPTION Y PP' ll measurements are ±. mm unless otherwise indicated REVISONS REV ESRIPTION REVISONS Y PP' REV ESRIPTION Y PP' REOMMENE P SOLER P RWN Y UNLESS OTHERWISE SPEIFIE REOMMENE STENIL PTTERN 00 Silicon rive IMENSIONS RE IN. RONIN 08// urham, N HEK.00 SHE RE IS OPEN MILLIMETERS N FTER FINISH. Phone (99) -00 TOLERNE UNLESS SPEIFIE: Fax (99) XX ±. PPROVE RWN Y UNLESS OTHERWISE.XXX ±. SPEIFIE REOMMENE STENIL PTTERN 00 Silicon rive IMENSIONS RE IN. RONIN 08// THIR NGLE PROJETION RWN Y urham, N. 770 MTERIL HEK SHE RE IS OPEN UNLESS OTHERWISE MILLIMETERS OUTLINE RWING, 00 XML FOR SHEET SPEIFIE METL N FTER PRTS FINISH. ONLY Phone (99) -0 REOMMENE P SOLER P REOMMENE STENIL PTTERN 00 Silicon rive IMENSIONS TOLERNE RE.X IN UNLESS ±. SPEIFIE:. RONIN 08// urham, N. 770 Fax (99) -8 RWING NO. R.XX.XX ±.7.HEK SHE RE IS OPEN MILLIMETERS N FTER FINISH. PPROVE Phone (99) -00 TOLERNE UNLESS.XXX SPEIFIE:.XXX ±.. FINL PROTETIVE FINISH X X ±.. Fax (99) -8.XX ±. PPROVE THIR NGLE PROJETION MTERIL OUTLINE RWING, 00 XML.XXX FOR SLE SHEET OF SURFE SHEET ±. FINISH: METL PRTS. ONLY.000 THIR NGLE PROJETION.X ±. MTERIL RWING NO. R.XX ±.7 OUTLINE RWING, 00 XML HV FOR SHEET METL PRTS ONLY.X ±.XXX. ±. FINL PROTETIVE FINISH RWING NO..XX ±.7 SLE.XXX SHEET OF SURFE ±. FINISH:.FINL PROTETIVE FINISH SLE SHEET OF SURFE FINISH:..000 / REOMMENE P SOLER P opyright 0 ree, Inc. ll rights reserved. The information in this document is subject to change without notice. ree, the ree logo and XLamp are registered trademarks of ree, Inc. 7
8 NOTIE REVISIONS REE ONFIENTIL. THIS PLOT N THE INFORMTION ONTINE WITHIN RE THE PROPRIETRY N ONFIENTIL INFORMTION OF REE, IN. THIS PLOT Y NOT E OPIE, REPROUE OR ISLOSE TO NY NUTHORIZE PERSON WITHOUT THE WRITTEN ONSENT F REE IN..00[.079] P.00[.7] Po o [ ].7[.09] E REV ESRIPTION POKET o -.0mm [."] o -.0mm [."] Ko -.mm [."] Y PP' XLamp XM-l HVW LE Tape and Reel NOTIE NOMINL ll ree carrier tapes conform to REE ONFIENTIL. EI-8, THIS PLOT NOTIE N THE utomated INFORMTION omponent Handling Systems Standard. 8.00[.] P.0[.7]F ONTINE REE ONFIENTIL. WITHIN RE THE THIS PROPRIETRY PLOT N THE NINFORMTION ONFIENTIL ONTINE INFORMTION WITHIN RE OF THE REE, PROPRIETRY N 0..0 IN. THIS [.8] PLOT MY NOT ONFIENTIL E OPIE, INFORMTION REPROUE OF OR REE, ISLOSE IN. THIS TO PLOT NY UNUTHORIZE MY NOT E PERSON OPIE, [.0] WITHOUT REPROUE THE WRITTEN OR MX ISLOSE ONSENT TO NY OF REE UNUTHORIZE IN. PERSON WITHOUT THE WRITTEN ONSENT OF REE IN. W E.00[.7].00[.079].00[.079] P P.0[.09].00[.7].00[.7] Po Po.0.0[.] o o o [ ] [ ].[.0] T.7[.09] E.7[.09] E REV REV REVISIONS REVISIONS ESRIPTION ESRIPTION PP' POKET POKET o o - ll -.0mm dimensions.0mm [."] [."] in mm. o o - -.0mm.0mm [."] [."] Ko Ko - -.mm.mm [."] [."] Y Y PP' NOTIE IL. THIS PLOT N THE INFORMTION IN RE THE PROPRIETRY N FORMTION OF REE, IN. THIS PLOT IE, REPROUE OR ISLOSE TO NY ERSON WITHOUT THE WRITTEN ONSENT.0[.] o 7.0.[.] Ko THIR NGLE PROJETION.0.0[.].0.0[.] o o.00[.7].0[.7]f NOMINL.00[.7].0[.7]F NOMINL REVISONS 0..0 [.8] REV 0. ESRIPTION.0 [.8] Y PP' [.0] MX Loaded [.0] pocket count MX E W was 70 S /8/0 S E W REE REFERENE RWING FOR TEK-PK RWING 087 UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES N FTER FINISH. TOLERNE UNLESS SPEIFIE:.XX ±.0.XXX ±.00 FOR SHEET METL PRTS ONLY RWN Y. RONIN HEK PPROVE MTERIL //0 8.00[.] 8.00[.] P P 00 Silicon rive urham, N [.09].0[.09] Phone (99) -00 Fax (99) -8 XM 00 RRIER TPE.X ±.0 RWING NO..XX ±.0 FINL PROTETIVE FINISH.XXX ± SLE SHEET OF SURFE FINISH: 7.0 RWING SLE 7.0 / User Feed irection.[.0] T.[.0] T EN NOTIE REE ONFIENTIL. THIS PLOT N THE INFORMTION ONTNE WITHIN RE THE PROPRIETRY N ONFIENTIL INFORMTION OF REE, IN. THIS PLOT MY NOT E OPIE, REPROUE OR ISLOSE TO NY UNUTHORIZE PERSON WITHOUT THE WRITTEN ONSENT OF REE IN. Trailer 0mm (min) of empty pockets sealed with tape ( pockets min.) 8.[.].7. THOE SIE.[.] STRT Ko Ko REE REFERENE RWING FOR TEK-PK RWING 087.0[.] REE REFERENE RWING FOR TEK-PK RWING 087 INEX QTY ITEM OMMENTS.0[.] o RWN Y UNLESS OTHERWISE SPEIFIE o. RONIN RWN ORE Y //0 00 Silicon rive IMENSIONS UNLESS RE OTHERWISE IN INHES SPEIFIE REEL RONIN //0 urham, 00 N. Silicon 770rive N IMENSIONS FTER FINISH. RE IN INHESHEK Phone (99) urham, -00 N. 770 HEK TOLERNE N UNLESS FTER SPEIFIE: FINISH. Fax (99) Phone -8 (99) -00 TOLERNE.XX ± UNLESS.0 SPEIFIE: PPROVE Fax (99) -8.XX ±.0.XXX ±.00 PPROVE NOE SIE X ±.XXX. ±.00 THIR NGLE PROJETION MTERIL THIR NGLE PROJETIONFOR SHEET METL PRTS ONLY XM MTERIL FOR SHEET METL PRTS ONLY XM RRIER RRIER TPE TPE Loaded Pockets Leader.X ±.0 RWING NO..XX.X ± ±.0.0 (000 Lamps) 00mm (min.) of RWING NO..XX ±.0 FINL PROTETIVE FINISH.XXX ±.00 FINL PROTETIVE FINISH empty pockets with X ±.XXX. ± SLE SHEET OF at least 00mm SURFE FINISH: RWING SLE SHEET OF/ SURFE FINISH: sealed by tape RWING SLE / (0 empty pockets min.) MESURE T HU THIR NGLE PROJETION UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN MILLIMETERS N FTER FINISH. TOLERNE UNLESS SPEIFIE:.XX ±..XXX ±. FOR SHEET METL PRTS ONLY MESURE T HU.X ±. FINISH.XX ±.7.XXX ±. SURFE FINISH:..000 RWN Y. RONIN HEK PPROVE MTERIL 0/08/0. ±..9± Silicon rive urham, N. 770 Phone (99) -00 Fax (99) -8 XM LOING SPE SHEET OF / ± MESURE T EGE 0 0 REVISONS REV ESRIPTION Y PP' RWN Y UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES. RONIN 09/9/09 urham, N. 770 opyright 0 ree, Inc. ll rights reserved. The information in this document is subject to change without notice. N ree, FTER FINISH. HEK the ree logo and XLamp are registered Phone (99) -00 TOLERNE UNLESS SPEIFIE: Fax (99) -8 trademarks of ree, Inc..XX ±.0 PPROVE 8.XXX ±.00 THIR NGLE PROJETION MTERIL FOR SHEET METL PRTS ONLY.X ±.0.XX ±.0.XXX ±.00 FINL PROTETIVE FINISH NTI-STTI HIPS RWING NO Silicon rive REEL, " X MM, PIEE SNP
!["] o -.0mm [."] Ko -.mm [."] Y PP' XLamp XM-l HVW LE Tape and Reel NOTIE NOMINL ll ree carrier tapes conform to REE ONFIENTIL.](/docs-images/47/20659971/images/page_8.jpg "EI-8, THIS PLOT NOTIE N THE utomated INFORMTION omponent Handling Systems Standard. 8.00[.] P.0[.7]F ONTINE REE ONFIENTIL.")
9 Packaging Humidity Humidity Indicator Indicator ard (inside (inside bag) bag) XLamp XM-l HVW LE essicant esiccant (inside bag) bag) Vacuum-Sealed Moisture Vacuum-Sealed arrier ag Moisture arrier ag Vacuum-Sealed Moisture Vacuum-Sealed arrier ag Moisture arrier ag REE Label in with ode ree in & ode, arcode Qty, Label Lot # REE Label in with oderee in & ode, arcode Qty, Label Lot # Label with with ustomer ree in ode, P/N, Qty, Qty, Lot #, Lot PO # Label with with ustomer ree in ode, P/N, Qty, Qty, Lot #, Lot PO ## Patent Label Patent Label Label with ustomer Order ode, Qty, Reel I, PO # Label with ustomer Order ode, Qty, Reel I, PO # Label with ustomer Order ode, Qty, Reel I, PO# Label with ree in ode, Qty, Lot # opyright 0 ree, Inc. ll rights reserved. The information in this document is subject to change without notice. ree, the ree logo and XLamp are registered trademarks of ree, Inc. 9
Cree XLamp XM-L HVW LEDs
Product family data sheet L-S rev ree XLamp XM-L HVW LEs Product escription The ree XLamp XM-L High Voltage White LE provides the lightingclass performance and reliability of ree XLamp LEs in the standard
Maximum drive current: 3000 ma. Low thermal resistance: 2.5 C/W. Maximum junction temperature: 150 C. Viewing angle: 125
ree XLamp XM-L LEs PROUT FMILY T SHEET L-S REV WWW.REE.OM/XLMP PROUT ESRIPTION The XLamp XM-L LE is the industry s highest performance, singledie white lighting-class LE. XLamp XM-L is 0% more efficient
Product family data sheet
ree XLamp XM-L LEs Product family data sheet L-S Rev 8 Product escription FETURES Table of ontents WWW.REE.OM/XLMP The XLamp XM-L LE is the Maximum drive current: industry s highest performance, 000 m
Cree XLamp XM-L2 LEDs
Product family data sheet L-S6 Rev 6E ree XLamp XM-L LEs Product escription The XLamp XM-L LE builds on the unprecedented performance of the original XM-L, increasing lumen output up to 0% while providing
Cree XLamp XM-L LEDs. Table of Contents. CLD-DS33 Rev 11D. Product family data sheet
ree XLamp XM-L LEs Product family data sheet L-S Rev Product escription The XLamp XM-L LE is the industry s highest performance, single die white lighting class LE. The XLamp XM-L LE is 0% more efficient
Cree XLamp XP-E High-Efficiency White LEDs
Product family data sheet ree XLamp XP-E High-Efficiency White LEDs LD-DS34 Rev 0 www. cree.com/xlamp PRODUT DESRIPTION XLamp XP-E High-Efficiency White LEDs upgrade the XLamp XP-E to leading performance
Cree XLamp XM-L EasyWhite LEDs
ree XLamp XM-L LEs PROUT FMILY T SHEET L-S38 REV 0 WWW.REE.OM/XLMP PROUT ESRIPTION The XLamp XM-L LE eliminates chromaticity binning, and enables luminaire and bulb manufacturers to deliver the consistent
Cree XLamp XP-G2 LEDs
Product family data sheet L-S51 Rev 11 ree XLamp XP-G2 LEs Product escription The XLamp XP-G2 LE builds on the unprecedented performance of the original XP-G by increasing lumen output up to 20% while
Maximum drive current: 3000 ma. Low thermal resistance: 2.5 C/W. Maximum junction temperature: 150 C. Viewing angle: 125
ree XLamp XM-L LEDs PRODUT FMILY DT SHEET LD-DS33 REV 2 WWW.REE.OM/XLMP PRODUT DESRIPTION The XLamp XM-L LED is the industry s highest performance, singledie white lighting-class LED. XLamp XM-L is 20%
Cree XLamp MX-3S LEDs Data Sheet
Cree XLamp MX-3S LEDs Data Sheet The Cree XLamp MX-3S LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a high voltage, PLCC configuration. All members of the MX-family
Cree XLamp MT-G EasyWhite LEDs
ree XLamp MT-G EasyWhite LEDs PRODUT FAMILY DATA SHEET/ BINNING AND LABELING DOUMENT LD-DS36 REV 0 WWW.REE.OM/XLAMP PRODUT DESRIPTION The XLamp MT-G EasyWhite LED maximizes lumen density, eliminates chromaticity
Cree XLamp MX-6 LEDs Data Sheet
Cree XLamp MX-6 LEDs Data Sheet The Cree XLamp MX-6 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC package. The XLamp MX-6 LED continues Cree s
Available in white (2,600 K to 8,300 K CCT) Maximum drive current: 1000 ma. Wide viewing angle: 120. Electrically neutral thermal path
PRODUCT FAMILY DATA SHEET CLD-23 REV 3 Cree XLamp MX-6 LEDs PRODUCT DESCRIPTION The Cree XLamp MX-6 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC
Product family data sheet
Cree XLamp MX-6 LEDs Product family data sheet CLD-DS23 Rev 3A Product Description The Cree XLamp MX-6 LED provides the proven lightingclass performance and reliability of Cree XLamp LEDs in a flat-top
CLD-DS45 Rev 2A. Product family data sheet
Cree XLamp X-D White LEDs Product family data sheet CLD-DS45 Rev 2A PRODUCT DESCRIPTION The XLamp X-D is Cree s newest lighting class LED, bringing the next generation of performance and price to LED lighting
Cree XLamp XP-G LEDs PRODUCT FAMILY DATA SHEET PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS CLD-DS20 REV 4
PRODUCT FAMILY DATA SHEET CLD-DS20 REV 4 Cree XLamp XP-G LEDs PRODUCT DESCRIPTION The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED
Cree XLamp XP-G LEDs Data Sheet
Cree XLamp XP-G LEDs Data Sheet The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED continues Cree s history of innovation in LEDs for
Cree XLamp XR-C LEDs PRODUCT FAMILY DATA SHEET PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS CLD DS10 REV7
PRODUCT FAMILY DATA SHEET CLD DS1 REV7 Cree XLamp XR-C LEDs PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS WWW. CREE.COM/XLAMP The XLamp XP-E LED combines the proven lighting-class performance and reliability
Cree XLamp XR-E LED. Table of Contents. CLD-DS05 Rev 16B. Product family data sheet
Cree XLamp XR-E LED Product family data sheet CLD-DS05 Rev 16B Product Description The XLamp XR-E LED is leading the LED lighting revolution with its unprecedented lighting-class brightness, efficacy,
Product family data sheet
Cree XLamp XP-E LEDs Product family data sheet CLD-DS18 Rev 19 Product Description The XLamp XP-E LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with
N35L-U High Power LED
N35L-U High Power LED Introduction The N35L-U LED from SemiLEDs brings industry leading technology to the solid state lighting market with its high quality and performance. With a silicone lens, N35L-U
Cree XLamp MC-E LED TABLE OF CONTENTS PRODUCT DESCRIPTION FEATURES CLD-DS16 REV 6 PRODUCT FAMILY DATA SHEET
PRODUCT FAMILY DATA SHEET CLD-DS16 REV 6 Cree XLamp MC-E LED PRODUCT DESCRIPTION The XLamp MC-E LED is a lightingclass, multi-chip LED that provides high lumen output in a small footprint package. Compared
How To Test An Lmh2
ree LMH2 LE Modules esign Guide Product design guide LM-G4-LMH2 Rev 8 WWW.REE.OM/MOULES Table of ontents Thank You...2 bout this esign Guide... autions... bout the LMH2 Series...4 Electrical esign...6
Features. Typical Applications G9. ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 1 DS-0042
ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 Features High Color rendering index Follow ANSI C78.788.2008 Chromaticity co-ordinates High flux per LED Good color uniformity Industry
High flux for outdoor applications
General Illumination LUXEON R High flux for outdoor applications LUXEON R brings illumination grade LED light sources to outdoor and industrial lighting applications and makes it easier than ever to design
3W RGB High Power LED
Features: Super high flux output and high luminance Designed for high current operation Low thermal resistance No UV Package Dimensions: Typical Applications Reading lights Portable flashlight Uplighters
T5050M-MCL1 High Power Mixing Color LED
PRODUCT DATASHEET T5050M-MCL1 High Power Mixing Color LED Introduction The T5050M-MCL1 LED from TSLC brings industry leading technology to the solid state lighting market with its high quality and performance.
LUXEON TX Extreme efficacy that will transform your next market leading luminaire
LUXEON TX Extreme efficacy that will transform your next market leading luminaire Introduction LUXEON TX emitters are illumination grade LEDs designed to deliver high efficacy with high flux density to
P2O LED. High Power LED PRODUCT DATASHEET. Introduction. RoHS Compliant
P2O LED High Power LED Introduction The P2O LEDs from SemiLEDs utilize innovative MvpLED technology which delivers superior levels of optical performance and reliability. Use of state of the art silicone
703-0148 InGaN / Sapphire White Water clear. Parameter Rating Unit
Package Dimensions: * All dimensions are in mm * Tolerance: ±.6mm unless otherwise noted. LED Chip Lens Colour Ant Part No. Material Colour Coordinates 73-148 InGaN / Sapphire White Water clear Absolute
LUXEON 5630 Mid-Power LEDs Illumination Portfolio
LUXEON 5630 Mid-Power LEDs Illumination Portfolio Introduction LUXEON 5630 delivers optimized performance in combination with quality of light needed for distributed light source applications. In addition
Cree XLamp XT-E High-Voltage White LEDs
Cree XLamp XT-E High-Voltage White LEDs Product family data sheet CLD-DS43 REV 11A Product Description The Cree XLamp XT-E High Voltage White (HVW) LED provides the lighting class performance and reliability
Edixeon S White Series Datasheet
Edixeon S White Series Datasheet Edixeon Series Features : Various colors More energy efficient than incandescent and most halogen lamps Low voltage operation Instant light Long operating life Copyright
P2N LED. High Power LED PRODUCT DATASHEET. Introduction. RoHS Compliant
PRODUCT DATASHEET P2N LED High Power LED Introduction The P2N LED brings industry leading technology to the solid state lighting market with its high quality and performance. With a silicone lens, P2N
DOMINANT. Opto Technologies Innovating Illumination. InGaN White S-Spice : SSW-SLD DATA SHEET: SpiceLED TM. Features: Applications:
DATA SHEET: SpiceLED TM SpiceLED TM Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size
Edixeon S5 White Series Datasheet
Edixeon S5 White Series Datasheet Edixeon Series Features : Various colors for choice Low voltage operation Instant light Long operating life Reflow process compatible Copyright 2013 Edison Opto Corporation.
EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 0805 Package Chip LED Preliminary
Feature RoHS compliant. This is a preliminary specification Chip LED package. intended for design purposes and Colorless clear resin. Wide viewing angle 130 o. subject to change without prior Brightness:
Cree PLCC4 3 in 1 RGB SMD LED CLMVB-FKA
Cree PLCC4 3 in 1 RGB SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1230.007 PRODUCT DESCRIPTION The full-color RGB LED offers a high-intensity light output and a wide viewing angle. The compact 2mm x 2mm package
Data Sheet. HSMP-382x, 482x. Surface Mount RF PIN Switch and Limiter Diodes. Features. Description/Applications
HSMP-382x, 482x Surface Mount RF PIN Switch and Limiter iodes ata Sheet escription/applications The HSMP-382x series is optimized for switch ing applications where ultra-low resistance is required. The
DOMINANT. Opto Technologies Innovating Illumination. 150 InGaN Warm White : NAF-BSG DATA SHEET : Primax TM. Features: Applications:
DATA SHEET : Primax TM 150 InGaN Warm White : NAF-BSG Primax TM Synonymous with function and performance, enter the Primax, the new era of high intensity illumination in LED. With its high flux output
SESD Series Ultra Low Capacitance Discrete TVS
SESD Series Ultra Low apacitance Discrete TVS RoHS Pb GREEN ELV Description The SESD Series Ultra Low apacitance Discrete TVS provides unidirectional and bidirectional ESD protection for the world s most
Cree XLamp MK-R LEDs. CLD-DS60 Rev 8. Product family data sheet
Cree XLamp MK-R LEDs Product family data sheet CLD-DS60 Rev 8 Product Description Built on Cree s revolutionary SC³ Technology platform, the XLamp MK R LED brings new levels of price and performance to
Multiple colors, a single focal length
Illumination LUXEON C Color Line Multiple colors, a single focal length The LUXEON C Color Line is an optically advanced portfolio of Color and White LEDs. Designed for flawless color mixing, LUXEON C
Cree PLCC6 3-in-1 SMD LED CLP6C-FKB
PRODUCT FAMILY DATA SHEET CLD-CT933.002 Cree PLCC6 3-in-1 SMD LED PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.
Cree PLCC6 3 in 1 SMD LED CLY6C-FKC
Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1323.005 PRODUCT DESCRIPTION This SMD LED features an IPx8 water resistant rating in a PLCC6 package. These high performance tricolor SMT LEDs
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED 1W (Preliminary)
Technical Data Sheet High Power LED 1W (Preliminary) Features Feature of the device: small package with high efficiency Typical view angle: 150. Typical light flux output: 30 lm @ 350mA. ESD protection.
Silicon PIN Photodiode
VEMD940F Silicon PIN Photodiode DESCRIPTION VEMD940F is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is
High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW DESCRIPTION is an infrared, 940 nm side looking emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed,
General Purpose White Portfolio
LUXEON Rebel General Purpose Portfolio High flux and color stability Technical Datasheet DS64 LUXEON Rebel General Purpose White Portfolio Introduction The LUXEON Rebel General Purpose White Portfolio
Data Sheet. ASMT-Mx00 Moonstone TM 1 W Power LED Light Source. Features. Description. Specifications. Applications
ASMT-M Moonstone TM 1 W Power LED Light Source Data Sheet Description The Moonstone TM 1W Power LED Light Source is a high performance energ efficient device which can handle high thermal and high driving
Cree PLCC6 3 in 1 SMD LED SLV6A-FKB
Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1320.001 PRODUCT DESCRIPTION These SMD LEDs are packaged in an industry standard PLCC6 package. These high performance tricolor SMT LEDs are designed
LZC-00MC40. LedEngin, Inc. High Luminous Efficacy RGB LED Emitter. Key Features. Typical Applications. Description
Key Features High Luminous Efficacy RGB LED Emitter LZC-MC4 Ultra-bright, Ultra-compact 4W RGB LED Full spectrum of brilliant colors with superior color mixing Small high density foot print 9.mm x 9.mm
Features. P-Channel Enhancement Mode MOSFET
P-Channel Enhancement Mode MOSFET Features Pin Description -4V/-25, R DS(ON) = 4mΩ (typ.) @ V GS = -V R DS(ON) = 55mΩ (typ.) @ V GS = -5V Super High Dense Cell Design G D S Reliable and Rugged Lead Free
WL-SWTC SMD White Top View Ceramic LED
A Dimensions: [mm] B Recommended land pattern: [mm] D Absolute Maximum Ratings (Ambient Temperature 25 C): Properties Test conditions Value Unit Power dissipation P Diss 2.52 W Peak Forward Current duty/10@1khz
How To Understand And Understand The Design Of An Oxymoron Lamp
Technical Datasheet DS56 power light source LUXEON Rebel Introduction LUXEON Rebel is an ultra-compact, surface-mount, high-power LED that delivers elevated standards for light output, flux density and
PRODUCT SPECIFICATION
PRODUCT SPECIFICTION SMD Type Size (mm):3.2*1.6*1.1 Emitting Color:White SMT package Suitable for all SMT assembly and soldering method Pb-free Reflow soldering application RoHS Compliant Features: Light
Power SMD LED PLCC-2 Plus
Power SMD LED PLCC-2 Plus 2238 DESCRIPTION The VLMW51.. white LED in PLCC-2 plus package is an advanced product in terms of high luminous flux and low thermal resistance. In combination with the small
Silicon NPN Phototransistor
Silicon NPN Phototransistor 16758-1 VEMT252X1 DESCRIPTION VEMT25X1 VEMT25X1 series are silicon NPN epitaxial planar phototransistors in a miniature dome lens, clear epoxy package for surface mounting.
SMD Low Power LED 61-238/XK2C-BXXXXXXXXXX/ET
SMD Low Power LED Features P-LCC-6 package Top view LED Wide viewing angle:120 High Luminous intensity High Efficacy Pb-free RoHS-compliant. Description The Everlight 61-238 package has high efficacy,
Energy meets efficiency
203, January 9 Energy meets efficiency MASTER LElamps imtone MASTER LElamps imtone deliver the warm, defined beam and the shift to warmer color during dimming that is provided by halogen and GLS, while
2016 Mid Power LED. 2016 Mid Power Product Datasheet. Features: Table of Contents. Applications
2016 Mid Power LED Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Diagram.... 5 Color Ranks.... 5 Features: High efficacy CRI Options:
Cree PLCC4 3 in 1 SMD LED CLV1L-FKB
Cree PLCC4 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1238.005 PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.
WINDOW ASM-SE-GI 173185-17-CHT SCREW 000G11-08-08U (28) WINDOW ASM-SE-GI BRACKET 151905-01-CHT SCREW 000G11-08-08U (22) TAPE 158028-01-000 (2150)
WG RELESE TE WG 0 0-0 0-0 WIN IT WIW SM-SE-GI 09 --HT 000G-0-0U () ZONE ISION REOR TE FTR-ORIG WIW SM-SE-GI -0-HT 09 RKET 90-0-HT 000G-0-0U () TPE 0-0-000 (0) 09 09 WIW SM-SE-GI -09-HT 000G-0-0U () OVER-WEEPHOLE
SPEC NO: DSAJ8637 REV NO: V.6B DATE: JUL/01/2016 PAGE: 1 OF 5 APPROVED:
1.0X0.5mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APHHS1005ZGC Green Features 1.0mmX0.5mm SMD LED, 0.5mm thickness. Low power
1 W High Power LED TPLG-MR7171R-H11-0L0M. 1 W High Power Warm White LED. Features. Applications. Device Selection Guide
1 W High Power LED 1 W High Power Warm White LED Features InGaN technology High flux output Lambertian distribution pattern Flexible lens design Good reliability performance RoHS Compliance M7171 Applications
SIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - TO-92. Description
SIACtor Series - TO-92 RoHS Pb e3 escription SIACtor Series TO-92 are designed to protect baseband equipment such as modems, line cards, CPE and SL from damaging overvoltage transients. The series provides
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0603 Package Chip LED (0.8 mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
HLMP-1600, HLMP-1601, HLMP-1620, HLMP-1621 HLMP-1640, HLMP-1641, HLMP-3600, HLMP-3601 HLMP-3650, HLMP-3651, HLMP-3680, HLMP-3681
HLMP-16, HLMP-161, HLMP-162, HLMP-1621 HLMP-16, HLMP-161, HLMP-36, HLMP-361 HLMP-365, HLMP-3651, HLMP-368, HLMP-3681 T 1 3 / (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet
SURFACE MOUNT LED LAMP STANDARD BRIGHT 0606
PACKAGE DIMENSIONS 0.075 (1.9) 0.063 (1.6) 0.035 (0.9) TOP 0.047 (1.2) 0.012 (0.3) 0.032 [0.8] SIDE 0.043 [1.1] 1 3 0.020 [0.5] 2 4 BOTTOM CATHODE MASK 1 2 3 4 HER / AlGaAs Red / Yellow (for-34) Green
1W High Power Purple LED Technical Data Sheet. Part No.: LL-HP60MUVA
1W High Power Purple LED Technical Data Sheet Part No.: LL-HP60MUVA Spec No.: HP60M Rev No.: V.2 Date: Aug./18/2009 Page: 1 OF 8 Features: Luckylight High power LED type. Lead frame type package (Heat
0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B
.45mm Height 42 Package Pure Green Chip LED Technical Data Sheet Part No.: LL-S16PGC-G5-1B Spec No.: S16 Rev No.: V.2 Date: Dec./6/25 Page: 1 OF 9 Features: Package in 8mm tape on 7" diameter reel. Compatible
CHM-27 COB Arrays White LED
CHM-27 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Product Ordering & Shipping Part Numbers...4 Product Typical Flux Range. 5
Cree PLCC4 3-in-1 SMD LED CLV1A-FKB
PRODUCT FAMILY DATA SHEET CLD-CT874.009 Cree PLCC4 3-in-1 SMD LED PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.
Cree P4 LED CP42B-RKS CP42B-AKS
Cree P4 LED CP42B-RKS CP42B-AKS PRODUCT FAMILY DATA SHEET CLD-CT1133.001 PRODUCT DESCRIPTION This revolutionary package design allows the lighting designer to reduce the number of LEDs required and provide
5W HI-POWER LED SPECIFICATION
5W HI-POWER LED SPECIFICATION HPG8b-495xWHCx Drawn by Checked by Approved by RoHS Conformity DATE:2013/4/9 REV:A HUEY JANN High Power 5W LED is made of GaInN chips with precise package technique which
SM Series 400W TVS Diode Array
General Purpose ESD Protection - SM5 through SM3 SM Series W TVS Diode Array RoHS Pb GREEN Description The SM series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic
Teccor brand Thyristors EV Series 0.8 Amp Sensitive SCRs
SxX8xSx Series RoHS escription New device series offers high static dv/dt and lower turn off (t q ) sensitive SR with its small die planar construction design. It is specifically designed for I (round
Cree 5-mm Red and Amber Round LED C503B-RAS/RAN/AAS/AAN C503B-RBS/RBN/ABS/ABN C503B-RCS/RCN/ACS/ACN
PRODUCT FAMILY DATA SHEET Cree 5-mm Red and Amber Round LED CLD-CT1079.005 PRODUCT DESCRIPTION Round LEDs offer superior light output for excellent readability in sunlight and dependable performance. They
Product Brief. Mid-Power LED 3030 Series. Product Data Sheet. Achieving the best system cost in Mid/High Power. STW8C2SB (Cool, Neutral, Warm) RoHS
Achieving the best system cost in Mid/High Power Mid-Power LED 3030 Series STW8C2SB (Cool, Neutral, Warm) RoHS Product Brief Description This White Colored surface-mount LED comes in standard package dimension.
SM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to
Bridgelux ES Rectangle Array Series
Bridgelux ES Rectangle Array Series Product Data Sheet DS24 BXRA-xxx0800, BXRA-xxx1200, BXRA-xxx2000 BXRA-40E0950, BXRA-40E1350, BXRA-40E2200 BXRA-xxC1100, BXRA-xxC1600, BXRA-xxC2600 Introduction The Bridgelux
Data Sheet. HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps. Description.
HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps Data Sheet Description These tinted diffused LED lamps are designed and optimized specifically
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Chip LED with Bi-Color (Multi-Color) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
Direct Attach DA700 LEDs CxxxDA700-Sxx000
Direct Attach DA7 LEDs CxxxDA7-Sxx Data Sheet Cree s Direct Attach DA7 LEDs are the next generation of solid-state LED emitters that combine highly efficient InGaN materials with Cree s proprietary device
Agilent T-1 3 / 4 (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet
Agilent T-1 3 / (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet HLMP-16, HLMP-161, HLMP-162, HLMP-1621 HLMP-16, HLMP-161, HLMP-36, HLMP-361 HLMP-365, HLMP-3651, HLMP-36, HLMP-361
AUTOMOTIVE GRADE. Orderable Part Number AUIRF7805Q SO-8 Tape and Reel 4000 AUIRF7805QTR
UTOMOTIVE GRE UIRF7805Q Features dvanced Planar Technology Low On-Resistance Logic Level N Channel MOSFET Surface Mount vailable in Tape & Reel 150 C Operating Temperature Lead-Free, RoHS Compliant utomotive
Specification MBT801-S
Specification MBT801S Drawn SSC Approval 고객명 Approval.com MBT801S 1. Features 2. Absolute Maximum Ratings 3. Electro Characteristics 4. Optical characteristics 5. Outline Dimension 6. Packing 7. Soldering
UV SMD LED PLCC-2 FEATURES APPLICATIONS. at I F (ma) (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.
UV SMD LED PLCC-2 VLMU31 19225 DESCRIPTION The package of the VLMU31-series is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled
Bridgelux ES Array Series
Bridgelux ES Array Series Product Data Sheet Introduction The Bridgelux family of LED Array products delivers high performance, compact and cost-effective solidstate lighting solutions to serve the general
Discontinued. LUXEON V Portable. power light source. Introduction
Preliminary Technical Datasheet DS40 power light source LUXEON V Portable Introduction LUXEON is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability
MP-1919 XNOVA Cube TM SMD LED
MP-1919 XNOVA Cube TM SMD LED Features: Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Binning.... 5 Chromaticity Diagram.... 6 Characteristic
LUXEON S. High Flux Density
LUXEON S Optimized solution for applications requiring high flux and tight beam control Technical Datasheet DS80 LUXEON S High Flux Density Introduction The LUXEON S emitters deliver uniform beam intensity
74HC374. Octal 3 State Non Inverting D Flip Flop. High Performance Silicon Gate CMOS
7H37 Octal 3 State Non Inverting Flip Flop High Performance Silicon Gate MOS The 7H37 is identical in pinout to the LS37. The device inputs are compatible with standard MOS outputs; with pullup resistors,
3mm Photodiode,T-1 PD204-6C/L3
3mm Photodiode,T-1 Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high
1 W High Power LED TPLG-MR7171LS-H11-1G. 1 W High Power Warm White LED. Features. Applications. Device Selection Guide
1 W High Power LED 1 W High Power Warm White LED Features InGaN technology High flux output Lambertian distribution pattern Flexible lens design Good reliability performance RoHS Compliance M7171 Applications
IR Edixeon Emitter. 1W Edixeon
High Power LED 1W Edixeon IR Edixeon Emitter Date:2006/06/01 Version:2.0 Device No. : 3-RD-01-E0009 Believe SRL Via Lago di Trasimeno, 21 - Schio (VI) - Italy TEL: +39/0445/579035 FAX: +39/0445/575708
Contents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18
Rev : 00 ISSUE NO : DATE OF ISSUE : 2009. 04. 10 S P E C I F I CATION MODEL : SLHNNWW629T1S0U0S0 [Rank : (S0), (U0), (S0)] HIGH POWER LED - SUNNIX6 CUSTOMER : CUSTOMER CHECKED CHECKED APPROVED SAMSUNG
CBT-90 TE Thermally Enhanced LED Chipset
CBT-90 TE Thermally Enhanced LED Chipset Features: Table of Contents Technology Overview...2 Test Specifications...2 Ordering Information...3 Monochrome Binning Structure...4 Large, monolithic chip with
SMF05C. TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SMF series TVS arrays are designed to protect sensitive electronics from damage or latchup due to ESD and other voltageinduced transient events. They are designed for use in applications
SPECIFICATIONS FOR APPROVAL
CUSTOMER :. DATE : 2010. 12. 16. SPECIFICATIONS FOR APPROVAL PRODUCT NAME : Top View Type White SMD LED MODEL NAME : LEMWS59T80LZ00 APPROVAL REMARK APPENDIX Designed Checked Approved LG Innotek Co., Ltd.