Maximum drive current: 3000 ma. Low thermal resistance: 2.5 C/W. Maximum junction temperature: 150 C. Viewing angle: 125
|
|
- Belinda Chambers
- 7 years ago
- Views:
Transcription
1 ree XLamp XM-L LEDs PRODUT FMILY DT SHEET LD-DS33 REV 2 PRODUT DESRIPTION The XLamp XM-L LED is the industry s highest performance, singledie white lighting-class LED. XLamp XM-L is 20% more efficient than XLamp XP-G at the same current, and can deliver 1000 lumens with 100 lumens per Watt efficacy. The XLamp XM-L LED offers ree s industry-leading features: wide viewing angle, symmetrical package, unlimited floor life and electrically neutral thermal path. XLamp XM-L LEDs can enable LED light into new applications that require tens of thousands of lumens, such as high bay and high-output area lighting. XM-L is also the ideal choice for lighting applications where high light output and maximum efficacy are required, such as LED light bulbs, outdoor lighting, portable lighting, indoor lighting and solar-powered lighting. FETURES Maximum drive current: 3000 m Low thermal resistance: 2.5 /W Maximum junction temperature: 150 Viewing angle: 125 vailable in warm, neutral and cool white NSI-compatible chromaticity opyright ree, Inc. ll rights reserved. The information in this document is subject to change without notice. opyright 2010 ree, Inc. ll rights reserved. The information in this document is subject to change without notice. ree, the ree logo and XLamp are registered trademarks of ree, Inc. ree, the ree logo and XLamp are registered trademarks of ree, Inc. bins Unlimited floor life at 30º/85% RH Reflow solderable - JEDE J-STD-020 Electrically neutral thermal path TLE OF ONTENTS Label Flux haracteristics... with ree in ode, 2 Qty, haracteristics... Lot # Label Relative with Spectral ustomer Power Order ode, Distribution... 3 Qty, Relative Reel ID, Flux PO# vs.... Junction 10 Temperature... 3 Electrical haracteristics... Thermal Design... Relative Flux vs. urrent... 5 Relative hromaticity vs. urrent and Temperature (ool White)... 5 Relative hromaticity vs. urrent and Temperature (Warm White)... 6 Typical Spatial Distribution... 7 Reflow Soldering haracteristics... 8 Notes... 9 Mechanical Dimensions...10 Tape and Reel... 9 Packaging...10 Label with ree in ode, Qty, Lot # Label with ustomer Order ode, Qty, Reel ID, PO# ree, Inc. 600 Silicon Drive Durham, N US Tel:
2 XLMP XM-L LEDS FLUX HRTERISTIS (TJ = 25 ) The following table provides several base order codes for XLamp XM-L LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XM-L inning and Labeling document. olor T Range ase Order odes Min Luminous 700 m (lm) Order ode Min. Max. Group Flux (lm) ool White 5,000 K 8,300 K Neutral White 3,700 K 5,000 K Warm White 2,600 K 3,700 K T5 260 XMLWT T5051 T6 280 XMLWT T6051 T 20 XMLWT LT0E T5 260 XMLWT LT50F T2 200 XMLWT LT20E7 T3 220 XMLWT LT30F7 Notes: ree maintains a tolerance of ± 7% on flux and power measurements and ± 2 on RI measurements. Typical RI for ool White (5,000 K 8,300 K T) is 65. Typical RI for Neutral White (3,700 K 5,000 K T) is 75. Typical RI for Warm White (2,600 K 3,700 K T) is 80. HRTERISTIS haracteristics Unit Minimum Typical Maximum Thermal Resistance, junction to solder point /W 2.5 Viewing ngle (FWHM) degrees 125 Temperature coefficient of voltage mv/ -3.0 ESD lassification (HM per Mil-Std-883D) lass 2 D Forward urrent m 3000 Reverse Voltage V 5 Forward voltage (@ 700 m) V Forward voltage (@ 1500 m) V 3.1 Forward voltage (@ 3000 m) V 3.35 LED Junction Temperature 150 ree, of Inc. ree, of Inc. 2
3 XLMP XM-L LEDS RELTIVE SPETRL POWER DISTRIUTION Relative 100 Spectral Power Relative Radiant Power (%) K -3700K T 3700K K T 5000K K T Wavelength (nm) RELTIVE FLUX VS. JUNTION TEMPERTURE (I F = 700 M) 100% 90% Relative Luminous Flux 80% 70% 60% 50% 0% 30% 20% 10% 0% Junction Temperature (º) ree, of Inc. ree, of Inc. 3
4 XLMP XM-L LEDS ELETRIL Electrical haracteristics HRTERISTIS (Tj = 25º) (T J = 25 ) Forward urrent (m) Forward Voltage (V) THERML DESIGN The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ool White ambient in order to optimize lamp life and optical characteristics Maximum urrent (m) Thermal Design Rj-a = /W Rj-a = 7 /W Rj-a = 10 /W Rj-a = 15 /W mbient Temperature (º) ree, of Inc. ree, of Inc.
5 XLMP XM-L LEDS RELTIVE FLUX VS. URRENT (T J = 25 ) Relative Luminous Flux (%) 350% 325% 300% 275% 250% 225% 200% 175% 150% 125% 100% 75% Typical Spatial Radiation Pattern 50% 25% 0% Forward urrent (m) RELTIVE HROMTIITY VERSUS URRENT ND TEMPERTURE (OOL WHITE) ool White urrent (m) Δx Δy Warm White ree, of Inc. ree, of Inc
6 XLMP XM-L LEDS RELTIVE HROMTIITY VERSUS URRENT ND TEMPERTURE (OOL WHITE) ool White ool White Δx Δy Δx Tsp ( ) Δy RELTIVE Warm HROMTIITY White VERSUS 1000 URRENT 1500 ND 2000 TEMPERTURE (WRM WHITE) urrent (m) Warm White Tsp ( ) Δx Δy Δx Δy urrent (m) ree, of Inc. ree, of Inc. 6
7 RELTIVE HROMTIITY VERSUS URRENT ND TEMPERTURE (WRM WHITE) Tsp ( ) Δx Δy XLMP XM-L LEDS Warm White Tsp ( ) Δx Δy TYPIL SPTIL DISTRIUTION 120 Relative Luminous Intensity (%) ngle (º) ree, of Inc. ree, of Inc. 7
8 XLMP XM-L LEDS REFLOW SOLDERING HRTERISTIS In testing, ree has found XLamp XM-L LEDs to be compatible with JEDE J-STD-020, using the parameters listed below. s a general guideline, ree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all P designs and configurations of reflow soldering equipment. Profile Feature Lead-ased Solder Lead-Free Solder verage Ramp-Up Rate (Ts max to Tp) 3 /second max. 3 /second max. Preheat: Temperature Min (Ts min ) Preheat: Temperature Max (Ts max ) Preheat: Time (ts min to ts max ) seconds seconds Time Maintained bove: Temperature (T L ) Time Maintained bove: Time (t L ) seconds seconds Peak/lassification Temperature (Tp) Time Within 5 of ctual Peak Temperature (tp) seconds 20-0 seconds Ramp-Down Rate 6 /second max. 6 /second max Time 25 to Peak Temperature 6 minutes max. 8 minutes max. Note: ll temperatures refer to the topside of the package, measured on the package body surface. ree, of Inc. ree, of Inc. 8
9 XLMP XM-L LEDS NOTES Lumen Maintenance Projections ree currently recommends a maximum drive current of 1500 m for XLamp XM-L white in designs seeking the ENERGY STR* 35,000 hour lifetime rating ( 9.1% luminous 6000 hours) or 25,000-hour lifetime rating ( 91.8% luminous 6000 hours). Please read the XLamp Long-Term Lumen Maintenance application note for more details on ree s lumen maintenance testing and forecasting. Please read the XLamp Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. * These lifetime ratings are based on the current ENERGY STR Solid State Lighting Luminaires V1.1 (December 12, 2008) and ENERGY STR Integral LED Lamps V1.0 (December 3, 2009) lumen maintenance criteria. Moisture Sensitivity In testing, ree has found XLamp XM-L LEDs to have unlimited floor life in conditions 30º / 85% relative humidity (RH). Moisture testing included a 168 hour soak at 85º / 85% RH followed by 3 reflow cycles, with visual and electrical inspections at each stage. Vision dvisory laim WRNING: Do not look at exposed lamp in operation. Eye injury can result. See LED Eye Safety at com/products/pdf/xlamp_eyesafety.pdf. ree, of Inc. ree, of Inc. 9
10 .8 XLMP XM-L LEDS MEHNIL DIMENSIONS ll measurements are ±.13 mm unless otherwise indicated NOTIE 6 REE ONFIDENTIL. THIS PLOT ND THE INFORMTION.7 ONTINED WITHIN RE THE PROPRIETRY ND NOTIE ONFIDENTIL INFORMTION OF REE, ONFIDENTIL. IN. THIS PLOT THIS PLOT ND THE INFORMTION MY NOT E OPIED, REPRODUED ONTINED OR DISLOSED WITHIN TO RE NY THE PROPRIETRY ND UNUTHORIZED PERSON WITHOUT ONFIDENTIL THE WRITTEN INFORMTION ONSENT OF REE, IN. THIS PLOT OF REE IN. MY NOT E OPIED, REPRODUED OR DISLOSED TO NY UNUTHORIZED PERSON WITHOUT THE WRITTEN ONSENT OF REE IN. 5 3 REVISONS 2 REV DESRIPTION Y NEW RELESE REV D DESRIPTION /15/10 dded die outline NEW DDSRELES 10/22/1 DDED DIMENSION FOR TOP OF FLSH dded D die 11/18/1 outli D 3.02 WS 3.09 DDED DIMENSION D FOR 1/5/11T D 3.02 WS D REOMMENDED STENIL PTTERN SHDED RE IS OPEN D 5.00 THIRD NGLE PROJETION UNLESS OTHERWISE SPEIFIED DIMENSIONS RE IN MILLIMETERS ND FTER FINISH. TOLERNE UNLESS SPEIFIED:.XX ±.25.XXX ±.125 X ± FOR SHEET METL PRTS ONLY.X ± 1.5.XX ±.75.XXX ±.25 X ±.5 SURFE FINISH: 1.6 DRWN Y D. RONIN HEK PPROVED MTERIL FINL PROTETIVE FINISH 3.02 SIZE 3.02 Phone (919) Fax (919) OUTLINE DRWING, 5050 XM TITLE SLE DRWING NO /9/ Silicon Drive Durham, N SHEET OF REV. D 1 / Top View Side View ottom View DRWN Y UNLESS OTHERWISE SPEIFIED 0. REOMMENDED STENIL PTTERN 60 DIMENSIONS RE IN D. RONIN 0/9/10 DRWN Y Du HEK SHDED RE IS OPEN MILLIMETERS ND FTER FINISH. UNLESS OTHERWISE SPEIFIED REOMMENDED STENIL PTTERN Ph REOMMENDED P SOLDER PD TOLERNE UNLESS SPEIFIED: DIMENSIONS RE IN D. RONIN 0/9/10 Fa HEK SHDED RE IS OPEN.XX ±.25 MILLIMETERS ND FTER FINISH. PPROVED Recommended REOMMENDED P SOLDER Solder PD Pad Recommended Stencil.XXX ± Pattern.125 TOLERNE UNLESS TITLE SPEIFIED: X ±.5.XX ±.25 PPROVED THIRD NGLE PROJETION (Shaded rea MTERIL OUTLINE DRWING, FOR Is SHEET Open).XXX ±.125 METL PRTS ONLY X ±.5 THIRD.X ± NGLE 1.5PROJETION MTERIL SIZE DRWING NO..XX ±.75 FOR SHEET METL PRTS ONLY.XXX ±.25 FINL PROTETIVE FINISH.X ± X ±.5.XX ±.75 SLE SHE SURFE FINISH: 1.6.XXX ±.25 FINL PROTETIVE FINISH X ± SURFE 2 FINISH: ree, of Inc. ree, of Inc. 10
11 XLMP XM-L LEDS TPE ND REEL 6 5 NOTIE 6 5 REE ONFIDENTIL. THIS PLOT ND THE INFORMTION ONTINED WITHIN 6 RE THE PROPRIETRY ND 5 NOTIE ONFIDENTIL INFORMTION OF REE, IN. THIS PLOT REE ONFIDENTIL. THIS PLOT NOTIE ND THE INFORMTION MY NOT E OPIED, REPRODUED OR DISLOSED TO NY ONTINED REE UNUTHORIZED ONFIDENTIL. WITHIN RE THE PERSON THIS PROPRIETRY PLOT WITHOUT ND ND THE INFORMTION WRITTEN ONSENT ONFIDENTIL ONTINED OF REE INFORMTION IN. WITHIN RE OF THE REE, PROPRIETRY IN. THIS PLOT ND MY NOT ONFIDENTIL E OPIED, INFORMTION REPRODUED OF OR REE, DISLOSED IN. THIS TO PLOT NY UNUTHORIZED MY NOT E PERSON OPIED, WITHOUT REPRODUED THE WRITTEN OR DISLOSED ONSENT TO NY OF REE UNUTHORIZED IN. PERSON WITHOUT THE WRITTEN ONSENT D OF REE IN. D 2.00[.079] D P2 2.00[.079] 2.00[.079] P2.00[.157] P2 Po.00[.157].00[.157] Po Po Do [ ] Do Do [ ] [.069] [ ] E1 1.75[.069] E1 1.75[.069] E1 3 REV REV 12.00[.72] 5.50[.217]F NOMINL 12.00[.72] 5.50[.217]F NOMINL 12.00[.72] 5.50[.217]F NOMINL [.8] [.0] MX [.8] E [.8] W [.0] MX [.0] MX E2 W E2 W 3 3 REV 2 2 REVISIONS 2DESRIPTION REVISIONS REVISIONS 1 1 Y 1 PP'D DESRIPTION Y PP'D DESRIPTION POKET SIZE Y PP'D o - POKET POKET 5.0mm SIZE SIZE [.213"] D o o - o - 5.0mm - 5.0mm [.213"] [.213"] D ll dimensions D in mm. o o - Ko - 5.0mm - 5.0mm 3.35mm [.213"] [.213"] [.132"] Ko Ko mm 3.35mm [.132"] [.132"] [.213] 3.0 o 5.0[.213] [.213] o o 6 NOTIE TIL. THIS PLOT ND THE INFORMTION HIN RE THE PROPRIETRY ND NFORMTION OF REE, IN. THIS PLOT PIED, REPRODUED OR DISLOSED TO NY PERSON WITHOUT THE WRITTEN ONSENT [.315] P 8.00[.315] 8.00[.315] P P 1.50[.059] 3 D1 1.50[.059] D1 1.50[.059] D REVISONS.36[.01] REV DESRIPTION T Y PP'D.36[.01] Loaded pocket count was T750.36[.01] DDS 11/8/10 S T D 3.35[.132] Ko 3.35[.132] 3.35[.132] Ko Ko REE REFERENE DRWING FOR TEK-PK DRWING [.213] REE REFERENE DRWING FOR TEK-PK DRWING o DRWN Y 5.0[.213] UNLESS OTHERWISE REE REFERENE SPEIFIED DRWING FOR TEK-PK DRWING D. RONIN /23/ Silicon Drive 5.0[.213] DIMENSIONS RE IN INHES Durham, N o DRWN Y User Feed Direction HEK UNLESS OTHERWISE ND FTER SPEIFIED FINISH. o D. RONIN DRWN Y /23/ Silicon Phone Drive (919) DIMENSIONS UNLESS TOLERNE RE OTHERWISE IN UNLESS INHES SPEIFIED: D. RONIN /23/10 Durham, 600 N. Fax Silicon (919) 27703Drive ND DIMENSIONS FTER FINISH. RE IN INHESHEK.XX ±.01 PPROVED Phone (919) Durham, N ND FTER FINISH. HEK TITLE 8 TOLERNE UNLESS.XXX SPEIFIED: ± Fax (919) Phone (919) TOLERNE END THODE SIDE.XX ± X UNLESS.01± SPEIFIED:.5 PPROVED Fax (919) THIRD NGLE PROJETION 6 5 STRT MTERIL.XX ±.01 3 TITLE FOR.XXX SHEET ± METL.005 PRTS ONLY XM 5050 PPROVED 2 RRIER TPE TITLE X ±.XXX.005 NOTIE.X.5 ±.06 THIRD NGLE PROJETION X ±.5 MTERIL SIZE DRWING NO REV. REE ONFIDENTIL. THIS PLOT ND THE INFORMTION THIRD NGLE PROJETIONFOR SHEET METL.XX PRTS ± ONLY XM.03 MTERIL FOR SHEET METL PRTS ONLY FINL PROTETIVE FINISH XM RRIER RRIER TPE TPE.XXX ±.010 INDEX QTY ITEM OMMENTS ONTNED WITHIN RE THE PROPRIETRY ND.X ± ONFIDENTIL INFORMTION OF REE, IN. THIS PLOT.X X ± ±.06.5 SIZE DRWING NO. REV..XX ±.03 SIZESLE DRWING NO. REV..XX ±.03 FINL PROTETIVE FINISH SHEET OF MY NOT E OPIED, REPRODUED OR DISLOSED TO NY.XXX SURFE ± FINISH: ORE FINL PROTETIVE FINISH UNUTHORIZED PERSON WITHOUT THE WRITTEN ONSENT.XXX ±.010 DRWING X ±.5 SLE REEL / 1 OF REE IN. 6 5 X ±.5 3 SLE 2 SHEET OF1 SURFE FINISH: 63 DRWING SLE SHEET 1OF/ 1 SURFE FINISH: DRWING 2 SLE 1 1 / NODE SIDE D Trailer 160mm (min) of empty pockets sealed with tape (15 pockets min.) Loaded Pockets (1000 Lamps) Leader 00mm (min.) of empty pockets with at least 100mm sealed by tape (0 empty pockets min.) D MESURED T HU THIRD NGLE PROJETION UNLESS OTHERWISE SPEIFIED DIMENSIONS RE IN MILLIMETERS ND FTER FINISH. TOLERNE UNLESS SPEIFIED:.XX ±.25.XXX ±.125 X ±.5 FOR SHEET METL PRTS ONLY MESURED T HU.X ± 1.5 FINISH.XX ±.75.XXX ±.25 X ±.5 SURFE FINISH: DRWN Y D. RONIN HEK PPROVED MTERIL 06/08/10 TITLE 13.1 ±.2 1.9± Silicon Drive Durham, N Phone (919) Fax (919) XM LODING SPE SHEET OF REV. 1 /1 21± MESURED T EDGE ree, of Inc. ree, of Inc. DRWN Y UNLESS OTHERWISE SPEIFIED DIMENSIONS RE IN INHES D. RONIN 09/29/09 ND FTER FINISH. HEK TOLERNE UNLESS SPEIFIED:.XX ±.01 PPROVED.XXX ±.005 TITLE X ±.5 THIRD NGLE PROJETION MTERIL REVISONS REV DESRIPTION Y PP'D 600 Silicon Drive 11 Durham, N Phone (919) Fax (919) REEL, 13" X 12MM, 3 PIEE SNP
12 PKGING Humidity Humidity Indicator Indicator ard (inside (inside bag) bag) Dessicant Desiccant XLMP XM-L LEDS (inside bag) bag) Vacuum-Sealed Moisture Vacuum-Sealed arrier ag Moisture arrier ag Vacuum-Sealed Moisture Vacuum-Sealed arrier ag Moisture arrier ag REE Label in with ode ree in & ode, arcode Qty, Label Lot # REE Label in with oderee in & ode, arcode Qty, Label Lot # Label with with ustomer ree in ode, P/N, Qty, Qty, Lot #, Lot PO # Label with with ustomer ree in ode, P/N, Qty, Qty, Lot #, Lot PO ## Patent Label Patent Label Label with ustomer Order ode, Qty, Reel ID, PO # Label with ustomer Order ode, Qty, Reel ID, PO # Label with ustomer Order ode, Qty, Reel ID, PO# Label with ree in ode, Qty, Lot # ree, of Inc. ree, of Inc. 12
13 INNING & LELING LD-P REV 1 ree XLamp XM-L LED INTRODUTION This document describes the product nomenclature required to select and order ree s XLamp XM-L LEDs. XLamp XM-L LEDs are tested and sorted into bins which are then combined into orderable kits identified by an order code. ll XLamp LEDs are tested and sorted by color and brightness into a unique bin. Each bin contains LEDs from only one color and brightness group and is uniquely identified by a bin code. White XLamp LEDs are sorted by chromaticity (color) and luminous flux (brightness). LEDs are shipped on reels containing LEDs from one bin and are always labeled with the appropriate bin code. TLE OF ONTENTS in and Order-ode Format... 2 Performance Groups rightness... 2 Performance Groups hromaticity... 3 ree s Standard hromaticity Regions Plotted on the 1931 IE urve... 6 Standard Order odes and ins (XM-L NSI ool White)... 7 (XM-L NSI Neutral White)... 7 (XM-L NSI Warm White)... 8 Kits contain LEDs from a number of similar bins and are fully defined by their order codes. full explanation of the order codes for XLamp XM-L LEDs, as well as a list of standard order codes, is provided in this document. opyright ree, Inc. ll rights reserved. The information in this document is subject to change without notice. ree, the ree logo and XLamp are registered trademarks of ree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact ree Sales at sales@cree.com. ree, Inc. 600 Silicon Drive Durham, N US Tel:
14 XLMP XM-L LED INNING & LELING IN ND ORDER-ODE FORMT in codes and order codes are configured in the following manner: Order ode in ode Series XML = XM-L Internal code SSSS-D-HHHH-NNNNNNNNN Kit number olor WT = White Series XML = XM-L Internal code Luminous flux group SSSS--WWW-FFF-GG- Internal code hromaticity group olor WT = White PERFORMNE GROUPS RIGHTNESS XLamp XM-L LEDs are tested for luminous flux and placed into one of the following luminous-flux groups: Group ode Min. Luminous 700 m (lm) Max. Luminous 700 m (lm) S T T T T T U ree, of Inc. ree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available of at For warranty information, please contact ree Sales at sales@cree.com. 2
15 XLMP ML FMILY LEDS INNING & LELING, REV 1 PERFORMNE GROUPS HROMTIITY Region x y Region x y Region x y Region x y D R S 0T 0U D R S 1T 1U D R S 2T 2U D R S 3T 3U D R S T U opyright ree, Inc. ll rights reserved. The information in this document is subject to change without notice. ree, the ree logo and XLamp are registered trademarks of ree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact ree Sales at sales@cree.com. 3
16 XLMP ML FMILY LEDS INNING & LELING, REV 1 PERFORMNE GROUPS HROMTIITY (ONTINUED) Region x y Region x y Region x y Region x y D D D D D D2 6D3 6D opyright ree, Inc. ll rights reserved. The information in this document is subject to change without notice. ree, the ree logo and XLamp are registered trademarks of ree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact ree Sales at sales@cree.com.
17 XLMP ML FMILY LEDS INNING & LELING, REV 1 PERFORMNE GROUPS HROMTIITY (ONTINUED) Region x y Region x y Region x y Region x y D D2 7D3 7D D D2 8D3 8D opyright ree, Inc. ll rights reserved. The information in this document is subject to change without notice. ree, the ree logo and XLamp are registered trademarks of ree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact ree Sales at sales@cree.com. 5
18 XLMP XM-L LED INNING & LELING REE S STNDRD HROMTIITY REGIONS PLOTTED ON THE 1931 IE URVE NSI ool White K K K 2S 2T 3S 3 y K 0T 1S 1 1T 1 1D D 2U 3 3R S D 0U 0R 1 1R 1U 2R NSI x NSI Neutral and Warm White K 2700K y K 3D 3 D 500K D1 5D K 52 5D 5D D1 63 6D2 61 6D 3500K 62 6D D1 7 7D2 73 7D 71 7D D D2 8D D NSI x ree, of Inc. ree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available of at For warranty information, please contact ree Sales at sales@cree.com. 6
19 XLMP XM-L LED INNING & LELING The following tables of order codes list flux minimums and chromaticity regions for XLamp XM-L LEDs. For other flux and chromaticity combinations, contact ree or an authorized distributor. STNDRD ORDER ODES ND INS (XM-L NSI OOL WHITE) XLamp XM-L LED Standard Order odes - White Min. Luminous Flux 700 m* hromaticity Regions Kit Number Group Flux (lm) NSI ool White (5000 K 8300 K) 0, 0, 0, 0D, 0R, 0S, 0T, 0U, 1, 1, 1, 1D, 1R, 1S, 1T, 1U, 2, 2, 2, 2D, 2R, 2S, 2T, 2U, 3, 3, 3R, 3S 0000T5051 T , 1, 1, 1D, 1R, 1S, 1T, 1U, 2, 2, 2, 2D, 2R, 2S, 2T, 3, 3, 3S 0000T5053 1, 1, 1, 1D, 2, 2, 2, 2D 0000T5050 T , 0, 0, 0D, 0R, 0S, 0T, 0U, 1, 1, 1, 1D, 1R, 1S, 1T, 1U, 2, 2, 2, 2D, 2R, 2S, 2T, 2U, 3, 3, 3R, 3S 0000T6051 1, 1, 1, 1D, 1R, 1S, 1T, 1U, 2, 2, 2, 2D, 2R, 2S, 2T, 3, 3, 3S 0000T6053 STNDRD ORDER ODES ND INS (XM-L NSI NEUTRL WHITE) XLamp XM-L LED Standard Order odes - White Min. Luminous Flux 700 m* hromaticity Regions Kit Number T Group Flux (lm) NSI Neutral White (3700 K 5000 K) T , 52, 53, 5, 5D1, 5D2, 5D3, 5D, 61, 62, 63, 6, 61, 62, 63, 6 000LT20F K, D, 51, 52, 53, 5, 51, 52, 53, 5 000LT30F5 300 K T , 52, 53, 5, 51, 52, 53, 5, 51, 52, 53, 5, 5D1, 5D2, 5D3, 5D, 000LT30E5 000K 51, 52, 53, 5, 5D1, 5D2, 5D3, 5D, 61, 62, 63, 6, 61, 62, 63, 6 000LT30F K 3, 3, 3, 3D 000LT0E K 3, 3D,, 000LT0F 750 K T 20,,, D 000LT0E 500 K, D, 51, 52, 53, 5, 51, 52, 53, 5 000LT0F5 300 K 51, 52, 53, 5, 51, 52, 53, 5, 51, 52, 53, 5, 5D1, 5D2, 5D3, 5D, 000LT0E5 000 K 51, 52, 53, 5, 5D1, 5D2, 5D3, 5D, 61, 62, 63, 6, 61, 62, 63, 6 000LT0F K 3, 3, 3, 3D 000LT50E K T , 3D,, 000LT50F 750 K,,, D 000LT50E 500 K T , 3, 3, 3D 000LT60E K * ree XLamp XM-L order codes specify only a minimum flux bin and not a maximum. ree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions specified by the order code. ree, of Inc. ree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available of at For warranty information, please contact ree Sales at sales@cree.com. 7
20 XLMP XM-L LED INNING & LELING STNDRD ORDER ODES ND INS (XM-L NSI WRM WHITE) XLamp XM-L LED Standard Order odes - White Min. Luminous Flux 700 m* hromaticity Regions Kit Number T Group Flux (lm) NSI Warm White (2700 K 3700 K) S , 72, 73, 7, 7D1, 7D2, 7D3, 7D, 81, 82, 83, 8, 81, 82, 83, 8 000LS60F K 81, 82, 83, 8, 81, 82, 83, 8, 81, 82, 83, 8, 8D1, 8D2, 8D3, 8D 000LS60E K 61, 62, 63, 6, 61, 62, 63, 6, 61, 62, 63, 6, 6D1, 6D2, 6D3, 6D 000LT20E K 61, 62, 63, 6, 6D1, 6D2, 6D3, 6D, 71, 72, 73, 7, 71, 72, 73, 7 000LT20F K T , 72, 73, 7, 71, 72, 73, 7, 71, 72, 73, 7, 7D1, 7D2, 7D3, 7D 000LT20E K 71, 72, 73, 7, 7D1, 7D2, 7D3, 7D, 81, 82, 83, 8, 81, 82, 83, 8 000LT20F K 81, 82, 83, 8, 81, 82, 83, 8, 81, 82, 83, 8, 8D1, 8D2, 8D3, 8D 000LT20E K 61, 62, 63, 6, 61, 62, 63, 6, 61, 62, 63, 6, 6D1, 6D2, 6D3, 6D 000LT30E K T , 62, 63, 6, 6D1, 6D2, 6D3, 6D, 71, 72, 73, 7, 71, 72, 73, 7 000LT30F K 71, 72, 73, 7, 71, 72, 73, 7, 71, 72, 73, 7, 7D1, 7D2, 7D3, 7D 000LT30E K T 20 61, 62, 63, 6, 61, 62, 63, 6, 61, 62, 63, 6, 6D1, 6D2, 6D3, 6D 000LT0E K * ree XLamp XM-L order codes specify only a minimum flux bin and not a maximum. ree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions specified by the order code. ree, of Inc. ree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available of at For warranty information, please contact ree Sales at sales@cree.com. 8
Cree XLamp XP-E High-Efficiency White LEDs
Product family data sheet ree XLamp XP-E High-Efficiency White LEDs LD-DS34 Rev 0 www. cree.com/xlamp PRODUT DESRIPTION XLamp XP-E High-Efficiency White LEDs upgrade the XLamp XP-E to leading performance
More informationMaximum drive current: 3000 ma. Low thermal resistance: 2.5 C/W. Maximum junction temperature: 150 C. Viewing angle: 125
ree XLamp XM-L LEs PROUT FMILY T SHEET L-S REV WWW.REE.OM/XLMP PROUT ESRIPTION The XLamp XM-L LE is the industry s highest performance, singledie white lighting-class LE. XLamp XM-L is 0% more efficient
More informationCree XLamp XM-L HVW LEDs
ree XLamp XM-L HVW LEs Product family data sheet L-S rev 0 Product escription The ree XLamp XM-L High Voltage White LE provides the lightingclass performance and reliability of ree XLamp LEs in the standard
More informationProduct family data sheet
ree XLamp XM-L LEs Product family data sheet L-S Rev 8 Product escription FETURES Table of ontents WWW.REE.OM/XLMP The XLamp XM-L LE is the Maximum drive current: industry s highest performance, 000 m
More informationCree XLamp XM-L EasyWhite LEDs
ree XLamp XM-L LEs PROUT FMILY T SHEET L-S38 REV 0 WWW.REE.OM/XLMP PROUT ESRIPTION The XLamp XM-L LE eliminates chromaticity binning, and enables luminaire and bulb manufacturers to deliver the consistent
More informationCree XLamp MT-G EasyWhite LEDs
ree XLamp MT-G EasyWhite LEDs PRODUT FAMILY DATA SHEET/ BINNING AND LABELING DOUMENT LD-DS36 REV 0 WWW.REE.OM/XLAMP PRODUT DESRIPTION The XLamp MT-G EasyWhite LED maximizes lumen density, eliminates chromaticity
More informationCree XLamp XM-L LEDs. Table of Contents. CLD-DS33 Rev 11D. Product family data sheet
ree XLamp XM-L LEs Product family data sheet L-S Rev Product escription The XLamp XM-L LE is the industry s highest performance, single die white lighting class LE. The XLamp XM-L LE is 0% more efficient
More informationCree XLamp XM-L2 LEDs
Product family data sheet L-S6 Rev 6E ree XLamp XM-L LEs Product escription The XLamp XM-L LE builds on the unprecedented performance of the original XM-L, increasing lumen output up to 0% while providing
More informationCree XLamp XM-L HVW LEDs
Product family data sheet L-S rev ree XLamp XM-L HVW LEs Product escription The ree XLamp XM-L High Voltage White LE provides the lightingclass performance and reliability of ree XLamp LEs in the standard
More informationCree XLamp XP-G LEDs Data Sheet
Cree XLamp XP-G LEDs Data Sheet The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED continues Cree s history of innovation in LEDs for
More informationAvailable in white (2,600 K to 8,300 K CCT) Maximum drive current: 1000 ma. Wide viewing angle: 120. Electrically neutral thermal path
PRODUCT FAMILY DATA SHEET CLD-23 REV 3 Cree XLamp MX-6 LEDs PRODUCT DESCRIPTION The Cree XLamp MX-6 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC
More informationCree XLamp MX-6 LEDs Data Sheet
Cree XLamp MX-6 LEDs Data Sheet The Cree XLamp MX-6 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC package. The XLamp MX-6 LED continues Cree s
More informationProduct family data sheet
Cree XLamp MX-6 LEDs Product family data sheet CLD-DS23 Rev 3A Product Description The Cree XLamp MX-6 LED provides the proven lightingclass performance and reliability of Cree XLamp LEDs in a flat-top
More informationCree XLamp XP-G LEDs PRODUCT FAMILY DATA SHEET PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS CLD-DS20 REV 4
PRODUCT FAMILY DATA SHEET CLD-DS20 REV 4 Cree XLamp XP-G LEDs PRODUCT DESCRIPTION The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED
More informationCree XLamp MX-3S LEDs Data Sheet
Cree XLamp MX-3S LEDs Data Sheet The Cree XLamp MX-3S LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a high voltage, PLCC configuration. All members of the MX-family
More informationCree XLamp XR-E LED. Table of Contents. CLD-DS05 Rev 16B. Product family data sheet
Cree XLamp XR-E LED Product family data sheet CLD-DS05 Rev 16B Product Description The XLamp XR-E LED is leading the LED lighting revolution with its unprecedented lighting-class brightness, efficacy,
More informationCLD-DS45 Rev 2A. Product family data sheet
Cree XLamp X-D White LEDs Product family data sheet CLD-DS45 Rev 2A PRODUCT DESCRIPTION The XLamp X-D is Cree s newest lighting class LED, bringing the next generation of performance and price to LED lighting
More informationCree XLamp XP-G2 LEDs
Product family data sheet L-S51 Rev 11 ree XLamp XP-G2 LEs Product escription The XLamp XP-G2 LE builds on the unprecedented performance of the original XP-G by increasing lumen output up to 20% while
More informationCree XLamp XR-C LEDs PRODUCT FAMILY DATA SHEET PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS CLD DS10 REV7
PRODUCT FAMILY DATA SHEET CLD DS1 REV7 Cree XLamp XR-C LEDs PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS WWW. CREE.COM/XLAMP The XLamp XP-E LED combines the proven lighting-class performance and reliability
More informationProduct family data sheet
Cree XLamp XP-E LEDs Product family data sheet CLD-DS18 Rev 19 Product Description The XLamp XP-E LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with
More informationCree XLamp MC-E LED TABLE OF CONTENTS PRODUCT DESCRIPTION FEATURES CLD-DS16 REV 6 PRODUCT FAMILY DATA SHEET
PRODUCT FAMILY DATA SHEET CLD-DS16 REV 6 Cree XLamp MC-E LED PRODUCT DESCRIPTION The XLamp MC-E LED is a lightingclass, multi-chip LED that provides high lumen output in a small footprint package. Compared
More informationHigh flux for outdoor applications
General Illumination LUXEON R High flux for outdoor applications LUXEON R brings illumination grade LED light sources to outdoor and industrial lighting applications and makes it easier than ever to design
More informationN35L-U High Power LED
N35L-U High Power LED Introduction The N35L-U LED from SemiLEDs brings industry leading technology to the solid state lighting market with its high quality and performance. With a silicone lens, N35L-U
More informationFeatures. Typical Applications G9. ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 1 DS-0042
ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 Features High Color rendering index Follow ANSI C78.788.2008 Chromaticity co-ordinates High flux per LED Good color uniformity Industry
More informationLUXEON 5630 Mid-Power LEDs Illumination Portfolio
LUXEON 5630 Mid-Power LEDs Illumination Portfolio Introduction LUXEON 5630 delivers optimized performance in combination with quality of light needed for distributed light source applications. In addition
More informationLUXEON TX Extreme efficacy that will transform your next market leading luminaire
LUXEON TX Extreme efficacy that will transform your next market leading luminaire Introduction LUXEON TX emitters are illumination grade LEDs designed to deliver high efficacy with high flux density to
More informationEVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 0805 Package Chip LED Preliminary
Feature RoHS compliant. This is a preliminary specification Chip LED package. intended for design purposes and Colorless clear resin. Wide viewing angle 130 o. subject to change without prior Brightness:
More informationCree PLCC6 3 in 1 SMD LED CLY6C-FKC
Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1323.005 PRODUCT DESCRIPTION This SMD LED features an IPx8 water resistant rating in a PLCC6 package. These high performance tricolor SMT LEDs
More informationCree PLCC4 3 in 1 RGB SMD LED CLMVB-FKA
Cree PLCC4 3 in 1 RGB SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1230.007 PRODUCT DESCRIPTION The full-color RGB LED offers a high-intensity light output and a wide viewing angle. The compact 2mm x 2mm package
More informationT5050M-MCL1 High Power Mixing Color LED
PRODUCT DATASHEET T5050M-MCL1 High Power Mixing Color LED Introduction The T5050M-MCL1 LED from TSLC brings industry leading technology to the solid state lighting market with its high quality and performance.
More informationP2N LED. High Power LED PRODUCT DATASHEET. Introduction. RoHS Compliant
PRODUCT DATASHEET P2N LED High Power LED Introduction The P2N LED brings industry leading technology to the solid state lighting market with its high quality and performance. With a silicone lens, P2N
More informationP2O LED. High Power LED PRODUCT DATASHEET. Introduction. RoHS Compliant
P2O LED High Power LED Introduction The P2O LEDs from SemiLEDs utilize innovative MvpLED technology which delivers superior levels of optical performance and reliability. Use of state of the art silicone
More information3W RGB High Power LED
Features: Super high flux output and high luminance Designed for high current operation Low thermal resistance No UV Package Dimensions: Typical Applications Reading lights Portable flashlight Uplighters
More informationCree PLCC6 3-in-1 SMD LED CLP6C-FKB
PRODUCT FAMILY DATA SHEET CLD-CT933.002 Cree PLCC6 3-in-1 SMD LED PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.
More informationCree PLCC6 3 in 1 SMD LED SLV6A-FKB
Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1320.001 PRODUCT DESCRIPTION These SMD LEDs are packaged in an industry standard PLCC6 package. These high performance tricolor SMT LEDs are designed
More informationEdixeon S White Series Datasheet
Edixeon S White Series Datasheet Edixeon Series Features : Various colors More energy efficient than incandescent and most halogen lamps Low voltage operation Instant light Long operating life Copyright
More informationWL-SWTC SMD White Top View Ceramic LED
A Dimensions: [mm] B Recommended land pattern: [mm] D Absolute Maximum Ratings (Ambient Temperature 25 C): Properties Test conditions Value Unit Power dissipation P Diss 2.52 W Peak Forward Current duty/10@1khz
More information703-0148 InGaN / Sapphire White Water clear. Parameter Rating Unit
Package Dimensions: * All dimensions are in mm * Tolerance: ±.6mm unless otherwise noted. LED Chip Lens Colour Ant Part No. Material Colour Coordinates 73-148 InGaN / Sapphire White Water clear Absolute
More informationCree XLamp MK-R LEDs. CLD-DS60 Rev 8. Product family data sheet
Cree XLamp MK-R LEDs Product family data sheet CLD-DS60 Rev 8 Product Description Built on Cree s revolutionary SC³ Technology platform, the XLamp MK R LED brings new levels of price and performance to
More informationLZC-00MC40. LedEngin, Inc. High Luminous Efficacy RGB LED Emitter. Key Features. Typical Applications. Description
Key Features High Luminous Efficacy RGB LED Emitter LZC-MC4 Ultra-bright, Ultra-compact 4W RGB LED Full spectrum of brilliant colors with superior color mixing Small high density foot print 9.mm x 9.mm
More informationMultiple colors, a single focal length
Illumination LUXEON C Color Line Multiple colors, a single focal length The LUXEON C Color Line is an optically advanced portfolio of Color and White LEDs. Designed for flawless color mixing, LUXEON C
More information2016 Mid Power LED. 2016 Mid Power Product Datasheet. Features: Table of Contents. Applications
2016 Mid Power LED Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Diagram.... 5 Color Ranks.... 5 Features: High efficacy CRI Options:
More informationEdixeon S5 White Series Datasheet
Edixeon S5 White Series Datasheet Edixeon Series Features : Various colors for choice Low voltage operation Instant light Long operating life Reflow process compatible Copyright 2013 Edison Opto Corporation.
More informationCree XLamp XT-E High-Voltage White LEDs
Cree XLamp XT-E High-Voltage White LEDs Product family data sheet CLD-DS43 REV 11A Product Description The Cree XLamp XT-E High Voltage White (HVW) LED provides the lighting class performance and reliability
More informationCree 5mm Round LED C503B-WAN
PRODUCT FAMILY DATA SHEET CLD-CT876.002 Cree 5mm Round LED PRODUCT DESCRIPTION Round LEDs offer superior light output for excellent readability in sunlight and dependable performance. They provide extremely
More informationCree PLCC4 SMD LED CLA2A-WKW
PRODUCT FAMILY DATA SHEET CLD-CT931.002 Cree PLCC4 SMD LED PRODUCT DESCRIPTION SMD LEDs is packaged in the industry standard package. These LEDs have high reliability performance and are designed to work
More informationCHM-27 COB Arrays White LED
CHM-27 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Product Ordering & Shipping Part Numbers...4 Product Typical Flux Range. 5
More informationCree 5mm Round LED C503D-WAN
PRODUCT FAMILY DATA SHEET CLD-CT935.006 Cree 5mm Round LED PRODUCT DESCRIPTION Round LEDs offer superior light output for excellent readability in sunlight and dependable performance. They provide extremely
More informationDOMINANT. Opto Technologies Innovating Illumination. InGaN White S-Spice : SSW-SLD DATA SHEET: SpiceLED TM. Features: Applications:
DATA SHEET: SpiceLED TM SpiceLED TM Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size
More informationData Sheet. ASMT-Mx00 Moonstone TM 1 W Power LED Light Source. Features. Description. Specifications. Applications
ASMT-M Moonstone TM 1 W Power LED Light Source Data Sheet Description The Moonstone TM 1W Power LED Light Source is a high performance energ efficient device which can handle high thermal and high driving
More informationMP-1919 XNOVA Cube TM SMD LED
MP-1919 XNOVA Cube TM SMD LED Features: Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Binning.... 5 Chromaticity Diagram.... 6 Characteristic
More informationCree PLCC4 3 in 1 SMD LED CLV1L-FKB
Cree PLCC4 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1238.005 PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.
More informationPower SMD LED PLCC-2 Plus
Power SMD LED PLCC-2 Plus 2238 DESCRIPTION The VLMW51.. white LED in PLCC-2 plus package is an advanced product in terms of high luminous flux and low thermal resistance. In combination with the small
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFICTION SMD Type Size (mm):3.2*1.6*1.1 Emitting Color:White SMT package Suitable for all SMT assembly and soldering method Pb-free Reflow soldering application RoHS Compliant Features: Light
More informationEVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED 1W (Preliminary)
Technical Data Sheet High Power LED 1W (Preliminary) Features Feature of the device: small package with high efficiency Typical view angle: 150. Typical light flux output: 30 lm @ 350mA. ESD protection.
More informationCree 5-mm Red and Amber Round LED C503B-RAS/RAN/AAS/AAN C503B-RBS/RBN/ABS/ABN C503B-RCS/RCN/ACS/ACN
PRODUCT FAMILY DATA SHEET Cree 5-mm Red and Amber Round LED CLD-CT1079.005 PRODUCT DESCRIPTION Round LEDs offer superior light output for excellent readability in sunlight and dependable performance. They
More informationDiscontinued. LUXEON V Portable. power light source. Introduction
Preliminary Technical Datasheet DS40 power light source LUXEON V Portable Introduction LUXEON is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability
More informationCree P4 LED CP42B-RKS CP42B-AKS
Cree P4 LED CP42B-RKS CP42B-AKS PRODUCT FAMILY DATA SHEET CLD-CT1133.001 PRODUCT DESCRIPTION This revolutionary package design allows the lighting designer to reduce the number of LEDs required and provide
More informationDOMINANT. Opto Technologies Innovating Illumination. 150 InGaN Warm White : NAF-BSG DATA SHEET : Primax TM. Features: Applications:
DATA SHEET : Primax TM 150 InGaN Warm White : NAF-BSG Primax TM Synonymous with function and performance, enter the Primax, the new era of high intensity illumination in LED. With its high flux output
More informationGeneral Purpose White Portfolio
LUXEON Rebel General Purpose Portfolio High flux and color stability Technical Datasheet DS64 LUXEON Rebel General Purpose White Portfolio Introduction The LUXEON Rebel General Purpose White Portfolio
More informationCree PLCC4 3-in-1 SMD LED CLV1A-FKB
PRODUCT FAMILY DATA SHEET CLD-CT874.009 Cree PLCC4 3-in-1 SMD LED PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.
More informationHow To Test An Lmh2
ree LMH2 LE Modules esign Guide Product design guide LM-G4-LMH2 Rev 8 WWW.REE.OM/MOULES Table of ontents Thank You...2 bout this esign Guide... autions... bout the LMH2 Series...4 Electrical esign...6
More information1W High Power Purple LED Technical Data Sheet. Part No.: LL-HP60MUVA
1W High Power Purple LED Technical Data Sheet Part No.: LL-HP60MUVA Spec No.: HP60M Rev No.: V.2 Date: Aug./18/2009 Page: 1 OF 8 Features: Luckylight High power LED type. Lead frame type package (Heat
More informationHLMP-1600, HLMP-1601, HLMP-1620, HLMP-1621 HLMP-1640, HLMP-1641, HLMP-3600, HLMP-3601 HLMP-3650, HLMP-3651, HLMP-3680, HLMP-3681
HLMP-16, HLMP-161, HLMP-162, HLMP-1621 HLMP-16, HLMP-161, HLMP-36, HLMP-361 HLMP-365, HLMP-3651, HLMP-368, HLMP-3681 T 1 3 / (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet
More informationSilicon PIN Photodiode
VEMD940F Silicon PIN Photodiode DESCRIPTION VEMD940F is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is
More informationHow To Understand And Understand The Design Of An Oxymoron Lamp
Technical Datasheet DS56 power light source LUXEON Rebel Introduction LUXEON Rebel is an ultra-compact, surface-mount, high-power LED that delivers elevated standards for light output, flux density and
More informationCBT-90 TE Thermally Enhanced LED Chipset
CBT-90 TE Thermally Enhanced LED Chipset Features: Table of Contents Technology Overview...2 Test Specifications...2 Ordering Information...3 Monochrome Binning Structure...4 Large, monolithic chip with
More informationC1919 15W COB Series
High Performance LED Module SemiLEDs C1919 15W COB is a high performance LED module with high thermal conductivity and reliability for demanding lighting applications. It is an easy to assemble light source
More informationSilicon NPN Phototransistor
Silicon NPN Phototransistor 16758-1 VEMT252X1 DESCRIPTION VEMT25X1 VEMT25X1 series are silicon NPN epitaxial planar phototransistors in a miniature dome lens, clear epoxy package for surface mounting.
More informationBridgelux ES Rectangle Array Series
Bridgelux ES Rectangle Array Series Product Data Sheet DS24 BXRA-xxx0800, BXRA-xxx1200, BXRA-xxx2000 BXRA-40E0950, BXRA-40E1350, BXRA-40E2200 BXRA-xxC1100, BXRA-xxC1600, BXRA-xxC2600 Introduction The Bridgelux
More informationHigh Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW DESCRIPTION is an infrared, 940 nm side looking emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed,
More informationBridgelux ES Array Series
Bridgelux ES Array Series Product Data Sheet Introduction The Bridgelux family of LED Array products delivers high performance, compact and cost-effective solidstate lighting solutions to serve the general
More informationSMD Low Power LED 61-238/XK2C-BXXXXXXXXXX/ET
SMD Low Power LED Features P-LCC-6 package Top view LED Wide viewing angle:120 High Luminous intensity High Efficacy Pb-free RoHS-compliant. Description The Everlight 61-238 package has high efficacy,
More informationC4246 120W COB Series
High Performance LED Module SemiLEDs C4246 120W COB is a high performance LED module with high thermal conductivity and reliability for demanding lighting applications. It is an easy to assemble light
More informationDirect Attach DA700 LEDs CxxxDA700-Sxx000
Direct Attach DA7 LEDs CxxxDA7-Sxx Data Sheet Cree s Direct Attach DA7 LEDs are the next generation of solid-state LED emitters that combine highly efficient InGaN materials with Cree s proprietary device
More informationUV SMD LED PLCC-2 FEATURES APPLICATIONS. at I F (ma) (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.
UV SMD LED PLCC-2 VLMU31 19225 DESCRIPTION The package of the VLMU31-series is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled
More informationLUXEON S. High Flux Density
LUXEON S Optimized solution for applications requiring high flux and tight beam control Technical Datasheet DS80 LUXEON S High Flux Density Introduction The LUXEON S emitters deliver uniform beam intensity
More information0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B
.45mm Height 42 Package Pure Green Chip LED Technical Data Sheet Part No.: LL-S16PGC-G5-1B Spec No.: S16 Rev No.: V.2 Date: Dec./6/25 Page: 1 OF 9 Features: Package in 8mm tape on 7" diameter reel. Compatible
More information5W HI-POWER LED SPECIFICATION
5W HI-POWER LED SPECIFICATION HPG8b-495xWHCx Drawn by Checked by Approved by RoHS Conformity DATE:2013/4/9 REV:A HUEY JANN High Power 5W LED is made of GaInN chips with precise package technique which
More informationCree 5-mm Round LED C503C-WAS/WAN
Cree 5-mm Round LED PRODUCT FAMILY DATA SHEET CLD-CT1098.008 PRODUCT DESCRIPTION Round LEDs offer superior light output for excellent readability in sunlight and dependable performance. They provide extremely
More informationAgilent T-1 3 / 4 (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet
Agilent T-1 3 / (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet HLMP-16, HLMP-161, HLMP-162, HLMP-1621 HLMP-16, HLMP-161, HLMP-36, HLMP-361 HLMP-365, HLMP-3651, HLMP-36, HLMP-361
More informationCree XLamp Long-Term Lumen Maintenance
Cree XLamp Long-Term Lumen Maintenance July 29 This application note outlines Cree s long-term testing methodology and provides Cree s guidance on mean L 7 lifetimes for XLamp XR-E LED lamps in a wide
More informationUltrabright White LED, Ø 3 mm
Ultrabright White LED, Ø 3 mm DESCRIPTION The VLHW41 series is a clear, untinted 3 mm LED for high end applications where supreme luminous intensity is required. These lamps utilize the highly developed
More informationData Sheets of AVA Technology SMD Type White LED. Model : T5050. AVA Technology Co.
Data Sheets of AVA Technology SMD Type White LED Model : AVA Technology Co. 2640 S. Myrtle Ave. Suite 6 Monrovia, CA 91016 P: 626-574-7726 F: 626-574-7732 http://www.led4light.com Top View LED with Reflector
More informationSpecification MBT801-S
Specification MBT801S Drawn SSC Approval 고객명 Approval.com MBT801S 1. Features 2. Absolute Maximum Ratings 3. Electro Characteristics 4. Optical characteristics 5. Outline Dimension 6. Packing 7. Soldering
More informationDome Lens SMD LED FEATURES APPLICATIONS. WAVELENGTH (nm)
Dome Lens SMD LED VLD.1235R... DESCRIPTION VLD.1235G... The dome lens SMD LED series has been designed in a small untinted and clear molded package with lens for surface mounting as gullwing or reverse
More informationB Recommended land pattern: [mm] 2013-09-10. SSt. SSt. SSt. HOe 2013-05-14 2013-04-10. SSt. SSt. SSt 2012-12-10. SSt 2012-11-05. HOe. SSt.
A Dimensions: [mm] B Recommended land pattern: [mm] D Absolute Maximum Ratings (Ambient Temperature 25 C): Properties Test conditions Value Unit Power dissipation P Diss 105 mw Peak Forward Current duty/10@1khz
More informationSESD Series Ultra Low Capacitance Discrete TVS
SESD Series Ultra Low apacitance Discrete TVS RoHS Pb GREEN ELV Description The SESD Series Ultra Low apacitance Discrete TVS provides unidirectional and bidirectional ESD protection for the world s most
More informationWelcome to this presentation on Thermal Characteristics of LEDs, part of OSRAM Opto Semiconductors LED Fundamentals series.
Welcome to this presentation on Thermal Characteristics of LEDs, part of OSRAM Opto Semiconductors LED Fundamentals series. In this presentation we will look at the basics of thermal management in LED
More informationData Sheet. HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps. Description.
HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps Data Sheet Description These tinted diffused LED lamps are designed and optimized specifically
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0603 Package Chip LED (0.8 mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
More information1 W High Power LED TPLG-MR7171R-H11-0L0M. 1 W High Power Warm White LED. Features. Applications. Device Selection Guide
1 W High Power LED 1 W High Power Warm White LED Features InGaN technology High flux output Lambertian distribution pattern Flexible lens design Good reliability performance RoHS Compliance M7171 Applications
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Chip LED with Bi-Color (Multi-Color) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
More informationLUXEON Rebel and LUXEON Rebel ES Color Portfolio
LUXEON Rebel and LUXEON Rebel ES Color Portfolio Illuminating your creativity Technical Datasheet DS68 LUXEON Rebel and LUXEON Rebel ES Color Portfolio Introduction With leading light output, color stability,
More informationSLLP-5630-150-G PRODUCT DATASHEET. RoHS Compliant
PRODUCT DATASHEET SLLP-5630-150-G Table of Contents Features... 1 Applications 1 Characteristics.. 1 Typical Electro optical Characteristics Curves... 3 Mechanical Dimensions... 4 Carrier Tape Dimensions.....
More informationProduct Brief. Mid-Power LED 3030 Series. Product Data Sheet. Achieving the best system cost in Mid/High Power. STW8C2SB (Cool, Neutral, Warm) RoHS
Achieving the best system cost in Mid/High Power Mid-Power LED 3030 Series STW8C2SB (Cool, Neutral, Warm) RoHS Product Brief Description This White Colored surface-mount LED comes in standard package dimension.
More informationSURFACE MOUNT LED LAMP STANDARD BRIGHT 0606
PACKAGE DIMENSIONS 0.075 (1.9) 0.063 (1.6) 0.035 (0.9) TOP 0.047 (1.2) 0.012 (0.3) 0.032 [0.8] SIDE 0.043 [1.1] 1 3 0.020 [0.5] 2 4 BOTTOM CATHODE MASK 1 2 3 4 HER / AlGaAs Red / Yellow (for-34) Green
More informationLow Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
More informationSurface Mount 905 nm Pulsed Semiconductor Lasers High Power Laser-Diode Family for Commercial Range Finding
Preliminary DATASHEET Photon Detection Surface Mount 5 nm Pulsed Semiconductor Lasers Near field profile Excelitas pulsed semiconductor laser produces very high peak optical pulses centered at a wavelength
More information: 5050 White LED PKG. Specification Sheet
5050 White LED PKG Specification Sheet For General Lighting 1 / 12 _ 5050 White LED Specification Sheet Approved rank specification for NC LED Iv: Min 5,000mcd (500mcd Sorting) Vf: 3.0 ~ 3.4V (0.1V Sorting)
More information