QuickSpecs. What's New. HP ProLiant ML110 G3. Overview. 5. Main System Board 6. I/O slots (2 PCI and 2 PCI Express) 7. System Fan 8.

Transcription

1 Overview 1. 48x CD-ROM & One Removable Media Bays 2. Intel Celeron D or Pentium 4 Processor 3. Two Front USB Ports 4. Two 1" Non-Hot Plug Drive Bays 5. Main System Board 6. I/O slots (2 PCI and 2 PCI Express) 7. System Fan 8. Power Supply What's New Intel Pentium D 920, 930, and 940 Processors (Dual-Core, 2.8 GHz, 3.0 GHz and 3.2 GHz, 2 x 2MB Level 2 cache, and 800MHz front-side-bus). DA Worldwide Version 16 February 6, 2006 Page 1

2 Overview At A Glance The is a remarkable value for workgroups or small-to-medium businesses. It provides dependable server performance with appropriate technology and features an affordable price. An entry-level tower server that delivers an appropriate balance of performance, manageability, expandability in compact form. Supports up to three hard disk drives, four memory slots, four I/O slots and six USB ports. 4U chassis provides a "right sized" solution for small offices. Intel Pentium D Processor, Dual-Core, 3.0 GHz, 2x1MB Level 2 cache, 800MHz front side-bus and support for HyperThreading technology Supports Intel Pentium 4 Processor 2-MB Level 2 cache, 3.0 GHz supporting HyperThreading technology. Intel Pentium 4 Processors, 3.0 GHz or 3.2 GHz, 2MB Level 2 cache, 800MHz front-side-bus and support for HyperThreading technology. Intel Celeron D Processor, 2.53 GHz, 256KB Level 2 cache, 533 MHz front-side-bus and support for HyperThreading technology. Intel E7230 Chipset with 800MHz FSB (Pentium 4) or 533MHz FSB (Celeron D) 512 MB of memory standard. Support for 1 GB and 2 GB DIMMS of ECC PC DDR II SDRAM. Broadcom 5721 Gigabit NIC (embedded) 10/100/1000 WOL (Wake on LAN) Integrated Single Channel Ultra ATA for optical drive Embedded Serial ATA (SATA Models) or a Single Channel Ultra320 SCSI Adapter (SCSI Models) Up to three Ultra320 non-hot plug SCSI hard disk drives or non-hot plug SATA hard disk drives. (Three drives requires the use of a conversion kit on both SCSI and SATA and the 6-port SATA RAID Controller on the SATA Models) Four total I/O slots: two 32-bit/33MHz PCI at 3.3 Volt slot and two PCI-Express slot (x4 and x16). Internal storage capacity of up to 438-GB (3 x GB non-hot plug SCSI HDD) (SCSI Models) Internal storage capacity of up to 1.5-TB (3 x 500 GB non-hot plug)sata HDD (FIO SATA Model) Integrated ATI ES MB video Lights-Out Management card available for remote management. 350W Non-Hot Plug Power Supply Six (USB 2.0 ports (2 rear, 2 front, 2 internal) Two front USB ports for easy access of storage options via USB. Two serial ports for multiple application needs. ROM Based Setup Utility (RBSU) and PXE support Protected by HP Services and a worldwide network of resellers and service providers. One-year Next Business Day, on-site limited global warranty (one year parts, one year labor, and one year on-site (1-1-1)). Certain restrictions and exclusions apply. Pre-Failure Notification on processors, memory, and SCSI hard drives. (Note: AP offers a warranty on the ML110 G3) DA Worldwide Version 16 February 6, 2006 Page 2

3 Standard Features Processor One of the following depending on Model Intel Celeron D Processor 326 (256KB L2 cache, 2.53 GHz, 533MHz FSB) Intel Pentium 4 Processor 630 (2MB L2 cache, 3.0 GHz, 800MHz FSB) Intel Pentium 4 Processor 640 (2MB L2 cache, 3.2 GHz, 800MHz FSB) Intel Pentium D Processor 930 (2x2MB L2 cache, 3.0 GHz, 800MHz FSB) Cache Memory One of the following depending on Model 256KB Level 2 ECC cache (Celeron D models) 2048KB Level 2 ECC cache (Pentium 4 models) 2x2048KB Level 2 ECC cache (Pentium D models) Chipset Intel E7230 Chipset with 800Mhz FSB (Pentium 4 and Pentium D) Intel E7230 Chipset with 533Mhz FSB (Celeron D) Memory Protection Un-buffered standard ECC capabilities Memory One of the following depending on Model Type Standard Maximum PC unbuffered DDR2 SDRAM (533MHz) 512 MB (on Pentium D, Pentium-4 and Celeron D models) 8 GB Network Controller Broadcom 5721 Gigabit NIC (embedded) 10/100/1000 WOL (Wake on LAN) Expansion Slots Slot Number Bus Speed Hot Plug Y/N PCI Voltage Notes 1 x8 PCI Express No n/a In a x16 slot Full Height 1 x4 PCI Express No n/a Full Height 2 32bit/33MHz PCI No 3.3V Full Height Storage Controller One of the following depending on Model HP Single Channel Ultra320 SCSI Adapter (SCSI Models) Integrated 2 ports Serial ATA (SATA Models) Storage CD-ROM 48x IDE (ATAPI) CD-ROM Drive Hard Drives One of the following: 36.4-GB Ultra320 SCSI 15,000 rpm 1" Drive (Standard on SCSI models) 80-GB SATA 7200 rpm 1" Drive (Standard on SATA Models) DA Worldwide Version 16 February 6, 2006 Page 3

4 Standard Features Maximum Internal Storage Type SCSI 438-GB (3 x 146-GB) (Non-hot plug) SATA 1.5-TB (3 x 500-GB) (Non-hot plug) NOTE: Maximum internal storage utilizes 2 internal drive bays and 1 removable media bay. NOTE: For SCSI models, configuring the media bay to hold the 3rd hard disk drive requires the purchase of the bracket conversion option kit (P/N B21). NOTE: For SATA models, both the bracket conversion option kit (P/N B21) and the HP 6-Port SATA RAID Controller Option Kit (P/N B21) are required for the installation of the 3rd HDD. Interfaces Parallel 1 Serial 2 Pointing Device (Mouse, PS2) 1 Graphics 1 Keyboard (PS2) 1 USB Network RJ-45 (Ethernet) 1 6 (2 rear, 2 front panel, 2 internal) NOTE: Internal USB ports are optimal for the attachment of HP USB DAT Tape Drives NOTE: Please see the following URL for additional information regarding USB support: Graphics Integrated ATI ES1000 Video Controller with 16 MB SDRAM Video Memory Form Factor Tower (4U) Industry Standard Compliance ACPI V2.0 Compliant PCI 2.3 Compliant PXE Support WOL Support IPMI 2.0 compliance Manageability HP Lights-Out 100 Remote Management Card Option (For details see Lights-Out 100 Remote Management Card) ( Offline Version - "floppy-based" method to flash the ROM Security Power-on password Setup password DA Worldwide Version 16 February 6, 2006 Page 4

5 Standard Features Server Power Cords 12' country specific, lowline NEMA power cord. Power Supply 350 Watts System Fans 1 - non-redundant system fan shipped standard 1 - non-redundant CPU heatsink fan shipped standard OS Support Microsoft Windows Server 2003: Standard (32 and 64 bit) Microsoft Windows Small Business Server 2003: Standard & Premium Edition Windows 2000 Server - Standard Edition Novell NetWare 6.5 SBS Red Hat Enterprise Linux 4 ES (32 and 64 bit) Windows XP Professional (Tested but not certified or supported by HP) NOTE: For an up-to-date listing of the latest ML110 G3 OS support matrix, please see: NOTE: For an up-to-date listing of the latest drivers available for the HP server ML110 G3, please see: NOTE: Drivers may also found on the base media for some Linux OS's. When configuring your server, please consult your base media driver base, or visit HP.com at: Factory Express Portfolio for Servers and Storage HP Factory Express offers configuration, customization, integration and deployment services for HP servers and/or storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed. Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging and custom packaging HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers, as well as, the MSA1000, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches. For more information on Factory Express services for your specific server model please contact your sales representative or go to HP ProLiant Smart Buys (NA only) The HP Smart Buy program offers mainstream business solutions at competitive prices with excellent availability and superior HP quality. It offers a wide range of industry-leading HP products at compelling prices, allowing you to receive richer configurations with additional options. NOTE: ProLiant Smart Buys are available in NA only. For detailed specification information on ProLiant Smart Buys please click on the following link: ftp://ftp.compaq.com/pub/products/servers/smartbuys.pdf DA Worldwide Version 16 February 6, 2006 Page 5

6 Standard Features Service and Support This product is covered by a global limited warranty and supported by HP Services and a worldwide network of resellers and service providers. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. NOTE: Limited warranty includes 1 year parts, 1 year labor, 1-year on-site support (3-1-1 warranty offered in AP only) Care Pack services provide a range of life cycle support options that let you choose the service levels that meet your business requirements, from basic to mission-critical. A full range of HP Care Pack hardware and software services are available including: Installation and start up Education courses Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7 days call window with options including 4-hour response or 6-hour Call To Repair Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and VMware-based IT solutions helping to deliver high level of application availability. Response times range from 30 mins for critical problems to 2 hours. System Management, Performance Services and Mission Critical Support Solution HP Care Pack services include coverage for the HP branded hardware options qualified for the server, purchased at the same time or afterward, internal to the enclosure, as well as 22" and smaller external monitors and tower UPS options up to 3kVA; these items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included, standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack. NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or visit our worldwide Web site on the internet at: NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us at: NOTE: Additional information regarding worldwide limited warranty and technical support is available at: DA Worldwide Version 16 February 6, 2006 Page 6

7 Models NOTE: ProLiant Smart Buys are available in NA only. For detailed specification information on ProLiant Smart Buys please click on the following link: ftp://ftp.compaq.com/pub/products/servers/smartbuys.pdf. Dual Core Models ML110 G3 3.0 GHz/800-2X2M NHP- SATA xx1 Processor Cache Memory Memory Network Controller Intel Pentium D Processor GHz /800MHz 2x2MB L2 cache 512 MB (Standard) to 8 GB (Maximum) ECC PC DDR2 (533MHz) Broadcom 5721 Gigabit NIC (embedded) 10/100/1000 WOL (Wake on LAN) Storage Controller Integrated 2 port embedded SATA RAID (RAID levels 0, 1) Hard Drive SATA Cable Internal Storage Optical Drive Form Factor (1) 80-GB SATA HDD 1 SATA Cable installed (1 additional SATA cable provided in the box) 1.08 TB maximum 48x IDE (ATAPI) CD-ROM Drive Tower (4U) ML110 G3 3.0 GHz/800 2X2M NHP-SCSI xx1 Processor Cache Memory Memory Network Controller Storage Controller Hard Drive Internal Storage Optical Drive Form Factor Intel Pentium D Processor GHz /800MHz 2x2 MB L2 cache 512 MB (Standard) to 8 GB (Maximum) ECC PC DDR2 (533MHz) Broadcom 5721 Gigabit NIC (embedded) 10/100/1000 WOL (Wake on LAN) HP Single Channel Ultra320 SCSI Adapter (1) 36-GB SCSI HDD 438GB maximum 48x IDE (ATAPI) CD-ROM Drive Tower (4U) Single Core Models ML110 G / MB, 80GB, Non-Hot Plug SATA xx1 Processor Cache Memory Memory Network Controller Intel Celeron D Processor GHz/533MHz 256KB L2 cache 512 MB (Standard) to 8 GB (Maximum) ECC PC DDR2 (533MHz) Broadcom 5721 Gigabit NIC (embedded) 10/100/1000 WOL (Wake on LAN) Storage Controller 2 ports embedded SATA Controller (RAID levels 0, 1) Hard Drive SATA Cable Optical Drive Form Factor (1) 80-GB SATA HDD 1 SATA Cable installed (1 additional SATA cable provided in the box) 48x IDE (ATAPI) CD-ROM Drive Tower (4U) DA Worldwide Version 16 February 6, 2006 Page 7

8 Models ML110 G MB/800 Processor 512MB 36GB, Non-Hot Cache Memory Plug SCSI Memory xx1 Network Controller Storage Controller Hard Drive SCSI Cable Internal Storage Optical Drive Form Factor Intel Pentium Processor 640, 3.2 GHz/800MHz FSB 2MB L2 cache 512 MB (Standard) to 8 GB (Maximum) ECC PC DDR2 (533MHz) Broadcom 5721 Gigabit NIC (embedded) 10/100/1000 WOL (Wake on LAN) HP Single Channel Ultra320 SCSI Adapter (1) 36-GB SCSI HDD 3 drop internal SCSI cable 438GB maximum 48x IDE (ATAPI) CD-ROM Drive Tower (4U) ML110 G M/ MB 80GB Non-Hot Plug SATA xx1 Processor Cache Memory Memory Network Controller Intel Pentium Processor 640, 3.2GHz/800MHz 2MB L2 cache 512 MB (Standard) to 8 GB (Maximum) ECC PC DDR2 (533MHz) Broadcom 5721 Gigabit NIC (embedded) 10/100/1000 WOL (Wake on LAN) Storage Controller Integrated 2 port embedded SATA RAID (RAID levels 0, 1) Hard Drive SATA Cable Internal Storage Optical Drive Form Factor (1) 80-GB SATA HDD 1 SATA Cable installed (1 additional SATA cable provided in the box) 1.08 TB maximum 48x IDE (ATAPI) CD-ROM Drive Tower (4U) ML110 G M/ MB 80GB Non-Hot Plug SATA xx1 Processor Cache Memory Memory Network Controller Intel Pentium Processor GHz /800MHz 2MB L2 cache 512 MB (Standard) to 8 GB (Maximum) ECC PC DDR2 (533MHz) Broadcom 5721 Gigabit NIC (embedded) 10/100/1000 WOL (Wake on LAN) Storage Controller Integrated 2 port embedded SATA RAID (RAID levels 0, 1) Hard Drive SATA Cable Internal Storage Optical Drive Form Factor (1) 80-GB SATA HDD 1 SATA Cable installed (1 additional SATA cable provided in the box) 1.08 TB maximum 48x IDE (ATAPI) CD-ROM Drive Tower (4U) DA Worldwide Version 16 February 6, 2006 Page 8

9 Models ML110 G M MB 36GB Non-Hot Plug SCSI xx1 Processor Cache Memory Memory Network Controller Storage Controller Hard Drive SCSI Cable Internal Storage Optical Drive Form Factor Intel Pentium Processor GHz /800MHz 2MB L2 cache 512 MB (Standard) to 8 GB (Maximum) ECC PC DDR2 (533MHz) Broadcom 5721 Gigabit NIC (embedded) 10/100/1000 WOL (Wake on LAN) HP Single Channel Ultra320 SCSI Adapter (1) 36-GB SCSI HDD 3 drop internal SCSI cable 438-GB maximum 48x IDE (ATAPI) CD-ROM Drive Tower (4U) Country Code Key XX=00 NA XX=01 Australia XX=03 UK XX=04 Germany XX=05 France XX=20 Brazil XX=37 AP XX=42 Euro XX=AA PRC XX=29 Japan XX=AB Taiwan XX=AD Korea DA Worldwide Version 16 February 6, 2006 Page 9

10 Configuration Information-Factory Integrated Models (North America Only) NOTE: For Configure to Order requirements within EMEA region, please consult local Sales Contact. NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis. NOTE: This product offering does not support HP Factory Express Server Configuration Level 1. Step 1: Base Configuration Models SATA Tower Chassis (North America) Factory Integrated Models ship with: Broadcom 5721 Gigabit NIC (embedded) 10/100/1000 WOL (Wake on LAN) Keyboard and Mouse 350 Watts, PFC (Power Factor Correcting) Tower Form Factor (4U) SCSI Tower Chassis (North America) Factory Integrated Models ship with: Broadcom 5721 Gigabit NIC (embedded) 10/100/1000 WOL (Wake on LAN) SCSI Host controller Keyboard and Mouse 350 Watts, PFC (Power Factor Correcting) Tower 4U Form Factor Step 2: Choose Required Options (only one of the following from each list unless otherwise noted) Processors Single-Core Intel Celeron D Processor GHz/533MHz Factory Integrated L21 Single-Core Intel Pentium 4 Processor GHz/800MHz Factory Integrated L21 Single-Core Intel Pentium 4 Processor GHz/800MHz, Factory Integrated L21 Dual-Core Intel Pentium D Processor GHz/800MHz Factory Integrated L21 Dual-Core Intel Pentium D Processor GHz/800MHz Factory Integrated L21 Dual-Core Intel Pentium D Processor GHz/800MHz Factory Integrated L21 Base Memory 2048 MB Unbuffered Advanced ECC PC DDR2 (1 x 2048 MB), Dual Rank B MB Unbuffered Advanced ECC PC DDR2 (1 x 1024 MB), Dual Rank B MB Unbuffered Advanced ECC PC DDR2 DIMM (1 x 512 MB), Single Rank B21 DA Worldwide Version 16 February 6, 2006 Page 10

11 Configuration Information-Factory Integrated Models (North America Only) Base Hard Drives Ultra320 SCSI - Non-hot Plug (SCSI Models Only) 36.4-GB Ultra320 SCSI 15,000 rpm Universal Hard Drive (1") B GB Ultra320 SCSI 10,000 rpm Universal Hard Drive (1") B GB Ultra320 SCSI 10,000 rpm Universal Hard Drive (1") B21 NOTE: Must also select the Bracket Conversion Kit (P/N B21) when purchasing 3rd Hard Disk Drive. SATA - Non-hot Plug HDD (SATA Models Only) 80-GB SATA 1.5Gb 7,200 rpm Hard Drive (1") B GB SATA 7,200 RPM Hard Drive (1"), FIO B GB SATA 7,200 rpm Hard Drive (1"), FIO B GB SATA 1.5 Gb 7,200 rpm Hard Drive (3.5") NHP FIO B21 NOTE: Must also select the bracket conversion kit ( B21) when purchasing 3rd Hard Disk Drive. NOTE: 160-GB (P/N B21), 250-GB (P/N B21) and 500-GB (P/N B21) SATA NHP HDD are Factory Integrated Only. Use of 500-GB HDD increases maximum ML110 G3 SATA storage to 1.5-TB. Optical Drives CD-RW/DVD-ROM Combo Drive Option Kit B21 HP DVD+R/RW 8X Slim B21 HP ProLiant 48X CD w/screws B21 Step 3: Choose Additional Factory Integratable Options Storage Controllers 64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G B21 NOTE: PCI-X Interface (PCI 32bit/33MHz compatible) HP PL100 SCSI RAID Controller B21 HP 6-Port SATA RAID Controller B21 NOTE: PCI-X Interface (PCI 32bit/33MHz compatible) NOTE: SCSI Storage Controllers are qualified for SCSI drives only and do not support the SATA Drives. NOTE: SATA Storage Controllers are qualified for SATA drives only and do not support the SCSI Drives. DA Worldwide Version 16 February 6, 2006 Page 11

12 Configuration Information-Factory Integrated Models (North America Only) Step 4: Choose Additional Options for Factory Integration Operating Systems Pre-install Microsoft Windows 2003 SBS Standard Edition W2003 SVR WEB PL1XX ENG B21 W2003 SVRACD PL1XX ENG W2003 STD X-64 1XX Acd ED FIO SW W2003 STD SVR PL1XX ENG B21 W2003 STD SVR PL1XX GR W2003 STD SVR PL1XX FR W2003 STD SVR PL1XX IT W2003 STD SVR PL1XX SP W2003 STD SVR PL1XX FIO SW CS W2003 STD SVR PL1XX FIO SW PL W2003 STD SVR PL1XX NL W2003 STD SVR PL1XX CHS AA1 W2003 STD SVR PL1XX FIO SW KOR AD1 W2003 STD SVR X-64 1XX Ed FIO SW B21 W2003 SBS STD PL1XX ENG B21 W2003 SBS STD PL1XX GR W2003 SBS STD PL1XX FR W2003 SBS STD PL1XX IT W2003 SBS STD PL1XX SP W2003 SBS STD PL1XX BR W2003 SBS STD PL1XX HU W2003 SBS STD PL1XX FIO SW CS W2003 SBS STD PL1XX FIO SW PL W2003 SBS STD PL1XX NL W2003 SBS STD PL1XX CHS AA1 W2003 SBS STD PL1XX FIO SW KOR AD1 W2003 SBS PRM PL1XX ENG B21 W2003 SBS PRM PL1XX GR W2003 SBS PRM PL1XX FR W2003 SBS PRM PL1XX IT W2003 SBS PRM PL1XX SP W2003 SBS PRM PL1XX BR W2003 SBS PRM PL1XX NL NOTE: For additional options, please refer to the "Options" section below. DA Worldwide Version 16 February 6, 2006 Page 12

13 Options NOTE: Some options may not be factory integratable. Please contact your local sales representative for additional information. Memory 2048 MB Unbuffered Advanced ECC PC DDR2 (1 x 2048 MB), Dual Rank B MB Unbuffered Advanced ECC PC DDR2 (1 x 1024 MB), Dual Rank Rank B MB Unbuffered Advanced ECC PC DDR2 (1 x 512 MB), Single Rank B21 Optical Drives CD-RW/DVD-ROM Combo Drive Option Kit B21 48X CD-ROM Option, Carbon B MB USB Diskette Drive DC361B DVD-RW Drive Option Kit B21 Hard Drives Ultra320 SCSI - Non-Hot Plug (SCSI Models Only) 36.4-GB Ultra320 SCSI 15,000 rpm Universal Hard Drive (1") B GB Ultra320 SCSI 10,000 rpm Universal Hard Drive (1") B GB Ultra320 SCSI 10,000 rpm Universal Hard Drive (1") B21 Serial - ATA (SATA)- Non-Hot Plug (SATA Models Only) 80-GB SATA 1.5Gb 7,200 rpm Hard Drive (1") B GB SATA 1.5Gb 7,200 rpm Hard Drive (1") B GB SATA 1.5Gb 7,200 rpm Hard Drive (1") B GB SATA 1.5 Gb 7,200 rpm Hard Drive (3.5") B21 NOTE: When selecting the 160, 250, or 500 GB SATA HDD, the user will have to remove the drive from the drive carrier in order to install the drive into the server. Once the drive is out of the carrier, it can be installed like a regular NHP drive. HP External 160GB HDD HP External Backup Solution by Seagate (North America) HP External Backup Solution by Seagate (EU) Storage Controllers - SCSI Drives 64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2 NOTE: PCI-X Interface (PCI 32bit/33MHz compatible) HP PL100 SCSI RAID Controller NOTE: PCI-X Interface (PCI 32bit/33MHz compatible) HP 6-Port SATA RAID Controller NOTE: PCI-X Interface (PCI 32bit/33MHz compatible) NOTE: SCSI Storage Controllers are qualified for SCSI drives only and do not support the SATA Drives. NOTE: SATA Storage Controllers are qualified for SATA drives only and do not support the SCSI Drives B B B21 DA Worldwide Version 16 February 6, 2006 Page 13

14 Options Communications HP NC320T PCI Express 1000T Gigabit Server Adapter B21 HP NC1020 PCI 1000T Gigabit Server Adapter B21 HP NC150T PCI 4-port Gigabit 1000T Combo Switch Adapter B21 Modem adapter option kit localizations - Modem adapter option kit Country Code Key #ACP= Austria #ABZ= Italy #ABW= Belgium (Dutch/Flemish) #AKN= Bosnia, Herzegovina, Croatia, Slovenia, Yugoslavia (Slovenian) #AKB= Czech Republic (Czech) & Slovakia #ABH= Netherlands #UUW= Nordic Region #ACB= Russia #ABF= France #ACQ= South Africa #ABD= Germany #ACD= Switzerland #AB7= Greece #AB8= Turkey #AKC= Hungary #ABU= UK #ABT= Israel #ABG= Australia, New Zealand #ACJ= India DC132D Tape Backup Drives NOTE: For complete listing of tape drive offerings see: HP StorageWorks DAT 24 USB Internal Tape Drive (Carbonite) HP StorageWorks DAT 40 USB Internal Tape Drive (Carbonite) HP StorageWorks DAT 40 USB External Tape Drive (Carbonite) HP StorageWorks DAT 72 USB Internal Tape Drive (Carbonite) HP StorageWorks DAT 72 USB External Tape Drive (Carbonite) HP StorageWorks DAT 40 SCSI Internal Tape Drive (Carbon) HP StorageWorks DAT 72 SCSI Internal Tape Drive (Carbon) NOTE: Installation of SCSI internal tape drives in a ML110 G3 model requires SCSI controller kit (PN: B21). DW069A DW022A DW023A DW026A DW027A C5686B Q1522B Installation of Server into Racks 100Kg/220Lbs Sliding shelf (Graphite) NOTE: When using the100kg/220lbs Sliding shelf, install Stabilizer Kit for 5642 rack (PN B21). Stabilizer Kit for 5642 rack (Graphite Carbon) NOTE: The stabilizing kit is used to prevent rack from tipping over B B21 DA Worldwide Version 16 February 6, 2006 Page 14

15 Options Lights Out Management Card Lights-Out Management Card Kit for ML110 G B21 Other HP 2-port SATA Cable B21 Hard Drive Bracket Conversion Option Kit B21 UPS HP T500 UPS 120 Volt (NA) HP T750 UPS, Low Voltage (NA/JPN) D71 HP T750 UPS, High Voltage (INTL) B31 USB Drive Key USB Drive Key 256MB PH657A USB Drive Key 512MB ED516AA HP KVM Switch Options HP IP Console Switch Box (KVM/IP), 1 x B21 HP IP Console Switch Box (KVM/IP), 3 x B21 HP 0x1x8 Server Console Switch B21 HP 0x2x16 Server Console Switch B21 PS/2 Interface adapter, 1-pack B21 PS/2 Interface adapter, 8-pack B21 USB Interface adapter, 1-pack B21 Serial Interface Adapter, 1-pack with power supply B21 NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches. Cat5e cables can be found at the following URL: HP 1x4 USB/PS2 KVM Switch, TT (NA/JPN) D71 HP 1x4 USB/PS2 KVM Switch, TT (AU/NZ) HP 1x4 USB/PS2 KVM Switch, TT (UK) HP 1x4 USB/PS2 KVM Switch, TT (EU) A21 HP 1x4 USB/PS2 KVM Switch, RM (ALL) B21 HP PS2 KVM Cable with audio, 6' 2-pack B21 HP USB KVM Cable with audio, 6' 2-pack B21 NOTE: For additional information regarding KVM Switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: HP Serial Console Server Options HP 16-Port Serial Console Server (WW) HP 48-Port Serial Console Server (WW) Serial Adapter, RJ45-DB9 DCE Female, 1 Pack Serial Adapter, RJ45-DB9 DCE Female, 8 Pack NOTE: For additional information regarding HP KVM Switches and options, please see the following URL: AF101A AF102A AF103A AF110A DA Worldwide Version 16 February 6, 2006 Page 15

16 Service and Support, HP Care Pack, and Warranty Information Service and Support Offerings (HP Care Pack Services) Hardware Services 4-Hour On-site Service 13-Hour x 5-Day Coverage, 3 Years, Electronic 24-Hour x 7-Day Coverage, 3 Years, Electronic Hardware Services Next Business Day On-Site Service 9-Hour x 5-Day Coverage, 3 Years, Electronic Hardware Installation, Electronic NOTE: For more information, customer/resellers can contact U4434E U4435E U4433E U4444E DA Worldwide Version 16 February 6, 2006 Page 16

17 Memory Celeron D and Pentium 4 Models Standard Memory 512 MB of PC DDR2 SDRAM running at 512 MB with Advanced ECC capabilities Memory installed (1 x 512 MB SDRAM DIMM). Standard Memory Plus Optional Memory Up to 5120 MB memory is available with the optional installation of PC Registered un-buffered ECC DDR2 SDRAM DIMM Memory kits. Standard Memory Replaced with Optional Memory Up to 8192 MB of memory is available with the removal of the standard 512 MB of memory and the optional installation of PC Registered un-buffered ECC DDR2 SDRAM DIMM Memory kits. NOTE: The below chart does not represent all possible memory configurations. NOTE: In memory configurations requiring 2 DIMM and 4 DIMM configurations, the memory must be paired for optimal performance. This means that DIMMs in slot 1 and 3 have to be identical, in slot 2 and 4 have to be identical. (For example, the Optional memory configuration shown below) Memory Slot Standard 512 MB Empty Empty Empty 512 MB Optional 5120 MB 2048 MB 512 MB 2048 MB 512 MB Maximum 8192 MB 2048 MB 2048 MB 2048 MB 2048 MB Following are memory options available from HP: 512 MB Unbuffered Advanced ECC PC DDR2 (1 x 512 MB), Single Rank B MB Unbuffered Advanced ECC PC DDR2 (1 x 1024 MB), Dual Rank B MB Unbuffered Advanced ECC PC DDR2 (1 x 2048 MB), Dual Rank B21 DA Worldwide Version 16 February 6, 2006 Page 17

18 Storage A 48x IDE (ATAPI) CD-ROM B Removable Media Bays (1.6" each) 1, 2 Two 1" Non-Hot Plug Drive Bays Drive Support Quantity Supported Position Supported Controller Removable Media DVD + CDRW Drive 2 A or B Integrated IDE (ATAPI) DVD-RW Drive 2 A or B Integrated IDE (ATAPI) DA Worldwide Version 16 February 6, 2006 Page 18

19 Storage Hard Drives (SCSI Models only) Ultra 320 SCSI - Non-Hot Plug 1-inch 36.4-GB 72.8-GB GB Quantity Supported Position Supported Controller Up to 3 1, 2 or B Hot Plug Single Channel Ultra320 SCSI Adapter (SCSI Models) NOTE: Support for position "B" requires the purchase of bracket conversion kit (P/N B21). Hard Drives (SATA Models only) SATA 1.5Gb - Non-Hot Plug 1-inch 80.0-GB GB GB GB Quantity Supported Position Supported Up to 3 1, 2 or B Controller NOTE: Support for position "B" requires the purchase of bracket conversion kit (P/N B21). NOTE: 1st and 2nd hard disk drive requires no additional controller. Addition of the 3rd hard disk drive requires the purchase of HP 6-Port SATA RAID Controller (P/N B21). Maximum Storage Capacity - SCSI Models Internal 438-GB (3 x 146-GB non-hot-plug hard drives) Total 438-GB Maximum Storage Capacity - Non-Hot Plug SATA Models Internal 240-GB (3 x 80-GB non-hot-plug hard drives) Total 240-GB (1.5-TB (3 x 500-GB via CTO or specials only) NOTE: Maximum internal storage utilizes 2 internal drive bays and 1 removable media bays. NOTE: The addition of the 3rd hard disk drive for SCSI maximum internal storage support requires the purchase of the bracket conversion option kit (P/N B21). NOTE: The addition of the 3rd hard disk drive for SATA maximum internal storage support requires the purchase of the bracket conversion option kit (P/N B21) and SATA RAID Controller (P/N B21.) DA Worldwide Version 16 February 6, 2006 Page 19

20 Storage Tape Drives NOTE: A SCSI controller needs to be purchased to operate internal SCSI devices in the SATA Models. NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following: (North America) (Worldwide) Internal USB Tape Drives HP DAT 24 USB HP DAT 40 USB HP DAT 72 USB Internal SCSI Tape Drives HP DAT 40 SCSI HP DAT 72 SCSI Quantity Supported Position Supported Controller 1 B Internal USB 2.0 port 1 per SCSI port External HP Single Channel Ultra320 SCSI HBA DA Worldwide Version 16 February 6, 2006 Page 20

21 Power Specifications Part Number Spare Kit Operational Input Voltage Range (V 90 to 135 and 200 to 265 V auto ranging rms) Frequency Range (Nominal) (Hz) 47 to 63 Hz Nominal Input Voltage (Vrms) Max Rated Output Wattage Rating N/A 350 N/A N/A 350 N/A Nominal Input Current (A rms) N/A 8 N/A N/A 4 N/A Max Rated Input Wattage Rating (Watts) N/A N/A N/A N/A N/A N/A Max. Rated VA (Volt-Amp) N/A N/A N/A N/A N/A N/A Efficiency (%) N/A >65% N/A N/A >65% N/A Power Factor N/A N/A N/A N/A N/A N/A Leakage Current (ma) 0.25mA (at 60HZ) Maximum Inrush Current (A peak) N/A No component was damaged and input fuse shall not blow N/A N/A N/A N/A N/A N/A N/A No component was damaged and input fuse shall not blow Maximum Inrush Current duration (ms) N/A N/A N/A N/A N/A N/A N/A DA Worldwide Version 16 February 6, 2006 Page 21

22 System Specifications Fully Configured Fully Loaded System output Wattage (W) Fully Loaded System Input Current (A rms) Power ** (see **) 350W Fully Loaded System Thermal (BTU- Hr) 1907BTU Fully Loaded System VA (Volt-Amp) 690 System Leakage with all power supplies loaded (ma) System Inrush Current with all power supplies loaded (A) Power cord requirements Power Cords (13 Cord Sets) Country APD 115V, 230V 0.75mA@240V 0.45mA@120V 80A Nema 5-15P to IEC320-C13 IEC320-C13 to IEC320-C14 **Power shown is for a fully configured system consisting of (1) CPU, (4) double-sided DIMMs, (4) HDDs, (1) CD-ROM, (1) DVD-ROM, (4) PCI cards, and (1) power supply. Power Cord Part Number Brazil Australia Euro France Germany Japan PRC UK US, Taiwan , , , (India) DA Worldwide Version 16 February 6, 2006 Page 22

23 Technical Specifications System Unit Dimensions (HxWxD) (with feet) Weight (approximate) Input Requirements (per power supply) X 6.88 X in (36.7 X 17.5 X 42.6 cm) lb (10.5 kg) Range Input Voltage Normal Line Voltage Line Frequency 50 to 60 Hz Rated Input Current BTU Rating SCSI Connectors (SCSI Models only) Power Supply Output Power (per power supply) load 8A at 115VAC, 4A at 230VAC 1907 BTU 90 to 135 VAC/180 to 265 VAC 115 or 230 VAC One internal LVD/SE connector for U160 devices, plus two internal SE connectors for legacy devices. Rated Steady-State Power Maximum Peak Power 350W 350W Temperature Range Operating 50 to 95 F (10 to 35 C) Relative Humidity (non-condensing) Acoustic Noise Shipping -40 to 140 F (-40 to 60 C) Operating 10% to 90% Non-operating 10% to 90% Idle (Fixed Disk Drives Spinning) L WAd (BELS) 5.5 Operating (Random Seeks to Fixed Disks) L WAd (BELS) 6.0 Non-Hot Plug Ultra320 SCSI Hard Drives 36.4-GB B21 Capacity Height Width Interface Transfer rate synchronous (maximum) Seek time (typical reads, including settling) 36,419.2MB 1.0 in (2.5 cm) 4.0 in (10.16 cm) Ultra320 SCSI 320 MB/s Single track Average Full-stroke Rotational Speed 0.7 ms 5.4 ms 11 ms Physical Configuration Bytes/Sector ,000 rpm Logical Blocks 71,132,000 Operating Temperature 41 to 140 F (5 to 60 C) DA Worldwide Version 16 February 6, 2006 Page 23

24 Technical Specifications Non-Hot Plug SATA Hard 80-GB 7.2K Drives B21 Capacity 80,054MB Height 1.0 in. (2.5 cm) Width 4.0 in. (10.16 cm) Interface SATA 150MB Transfer rate synchronous 150MB/s (maximum) Seek time (typical reads, Single track 0.8 ms including settling) Average 8.5 ms Full-stroke 17.8 ms Rotational speed 7,200 rpm Physical Configuration Bytes/Sector 512 Logical Blocks 156,355,584 Operating Temperature 41 to 131 F (5 to 55 C) 48X Max IDE (ATAPI) CD- ROM Drive B21 Disk Applicable Disk CD-ROM, CD-XA, CD-DA (Mode 1, Mode 2, Form 1 and 2) Photo CD (Single and Multi-session) Mixed Mode (Audio and Data combined) CD-R Capacity 540MB (Mode 1, 12 cm) 650MB (Mode 2, 12 cm) Block Size Mode 1 2,048 bytes, 1024 bytes Mode 2 2,340 bytes, 2,336 bytes, 1024 bytes CD-DA 2,352 bytes CD-XA 2,328 bytes Interface IDE (ATAPI) Access Times (typical) Random <100 ms Full-Stroke <150 ms Data Transfer Rate Sustained 3000 to 7200 KB/s (20X to 48X) Burst 150 KBps to 7,200 KBps Bus Rate 16.7 MBps Cache Buffer 128 KB Start-up Time (typical) < 7seconds Stop Time < 4seconds Laser Parameters Type Semiconductor Laser GaA1As Wave Length 780 ± 25 nm Operating Conditions Temperature 41 to 122 F (5 to 50 C) Humidity 10% to 90% Dimensions (HxWxD, maximum) 1.63 x 5.75 x 7.87 in (41.3 x 146 x 200 cm) Weight 2.64 lb (1.2 kg) DA Worldwide Version 16 February 6, 2006 Page 24

25 Technical Specifications HP Single Channel Ultra320 SCSI Adapter (SCSI Models only) B21 Drives Supported Up to 4 SCSI devices Wide (3 drives supported maximum for ML110 G3) Data Transfer Method 64-bit/33-MHz PCI bus-master SCSI Channel Transfer 320 MB/s per channel Rate SCSI Protocols Ultra 320, Ultra 3, Ultra 2 Fast SCSI-2 Maximum Capacity 440.4GB (3x146.8GB, NHP U320 SCSI HDD) Electrical Protocol Low Voltage Differential (LVD) SCSI Termination Active Termination External SCSI Connectors None 6 port SATA RAID controller (SATA Model requiring RAID 5 Only) B21 SATA Protocol SATA 1.5Gb/s SATA Ports 6 internal (3 drives supported maximum for ML110 G3) Port transfer rate Drives Supported Data Transfer Method Storage Capacity PCI Cache Memory RAID Levels Supported Maximum Capacity Logical RAID Volumes Supported Operating Systems 1.5 Gb/s total Up to 3SATA HDD 32-bit/66-MHz PCI bus-master up to 320 GB (3x 80GB hot plug SATA HDD) 3.3 volt CPI slot compatibility only (PCI-X interface) 64MB of SDRAM Memory for RAID and read cache RAID 5 (Distributed Data Guarding) RAID 1+0 (Striping & Mirroring) RAID 1 (Mirroring) RAID 0 (Striping) up to 320GB (3x 80GB hot plug SATA HDD) 4 Microsoft Windows 2000 Server; Microsoft Windows Server 2003; Linux: Red Hat 9.0, RHEL 4. Broadcom 5721 (embedded) 10/100/1000 WOL (Wake on LAN) Network Interface Data Transfer Method Network Transfer Rate Connector Cable Support Ethernet Standards: IEEE 802.3, 802.3u, 802.3ad, and 802.3ab, 802.1x, 802.1Q and 802.1P PCI Express 10/100/1000 Mbps, Half- and full-duplex RJ-45 connector Category 5 or higher UTP wiring Auto-negotiated speeds of 10/100/1000 Mbps in both half and full duplex DA Worldwide Version 16 February 6, 2006 Page 25

26 Technical Specifications Copyright 2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. DA Worldwide Version 16 February 6, 2006 Page 26