1811G/H PITOT-STATIC TEST SET

Transcription

1 1811G/H PITOT-STATIC TEST SET USER INSTRUCTION MANUAL M/N: 1811G/H, P/Ns: Doc. P/N: / 168 / 169 Revision A September 9, 2009 BARFIELD, INC. Corporate Headquarters 4101 Northwest 29th Street Miami, Florida [email protected]

2

3 THIS PAGE INTENTIONALLY LEFT BLANK

4 THIS PAGE INTENTIONALLY LEFT BLANK

5 1811G / H INSTRUCTION MANUAL CONTACT INFORMATION Users are requested to notify the manufacturer of any discrepancy, omission, or error found in this manual. Inquiries should include specific questions and reference the publication title, number, chapter, page, figure, paragraph, and effective date. Please send comments to: TECHNICAL CUSTOMER SUPPORT - GSTE BARFIELD, INC. P.O. BOX MIAMI, FL USA Telephone (305) (800) Fax (305) [email protected] / 168 / 169 Rev. A Page iv

6 THIS PAGE INTENTIONALLY LEFT BLANK

7 1811G / H INSTRUCTION MANUAL ATTENTION Although every effort has been made to provide the end user of this equipment with the most current and accurate information, it may be necessary to revise this manual in the future. Please be sure to complete and return the enclosed OWNER WARRANTY REGISTRATION CARD to Barfield in order to validate the warranty and to ensure that you will receive updated information when published. You MUST have your name and address on file at Barfield as a registered user of this equipment, to be able to obtain the service covered by the warranty. Visit the company website, for publication updates. Please send the Registration Card to: Barfield, Inc. P.O. Box Miami, FL USA / 168 / 169 Rev. A Page vi

8 THIS PAGE INTENTIONALLY LEFT BLANK

9 1811G / H INSTRUCTION MANUAL REVISION RECORD REV. ECO # REV. DATE DESCRIPTION OF CHANGE A September 9, 2009 Initial Release, prepared from Technical Manual / / (TM1811G/H-8111, revised on March 12, 1991), to update company logo, contact information and format / 168 / 169 Rev. A Page viii

10 THIS PAGE INTENTIONALLY LEFT BLANK

11 1811G / H INSTRUCTION MANUAL MAINTENANCE AND REPAIR INFORMATION The manufacturer of this equipment does not recommend the user to attempt any maintenance or repair. In case of malfunction, contact the manufacturer, to obtain the list of approved repair facilities worldwide, ensuring that this equipment will be serviced using proper procedures and certified instruments. A Return Maintenance Authorization (RMA) number will be assigned during this call, to keep track of the shipment and the service. BARFIELD PRODUCT SUPPORT DIVISION Telephone (305) (800) Fax (305) Shipping Address: Barfield, Inc NW 29th Street Miami, Florida USA Mailing Address: Barfield, Inc. P.O. Box Miami, FL USA / 168 / 169 Rev. A Page x

12 THIS PAGE INTENTIONALLY LEFT BLANK

13 Contact Information Attention Page Revision Record Page Maintenance and Repair Information Table of Contents 1811G / H INSTRUCTION MANUAL TABLE OF CONTENTS INTRODUCTION Page 1. PUBLICATION BREAKDOWN INFORMATION PROVIDED WITH THE UNIT RECERTIFICATION...2 CHAPTER 1: DESCRIPTION 1. PURPOSE OF MANUAL GENERAL DESCRIPTION SPECIFICATIONS PHYSICAL DESCRIPTION...7 CHAPTER 2: OPERATION 1. GENERAL PRESSURE / VACUUM SOURCE OPERATION PREPARATION FOR TEST TESTER LEAK CHECKS STATIC SYSTEM LEAKS PITOT SYSTEM TESTS COMBINED PITOT / STATIC SYSTEM TESTS MACHMETER TEST ENGINE PRESSURE RATIO (EPR) TEST MANIFOLD PRESSURE GAUGE TEST PRESSURE TESTS VACUUM TESTS SHUTDOWN PROCEDURES CHAPTER 3: SHIPPING 1. RECEIVING SHIPPING / 168 / 169 Rev. A Page xii

14 1811G / H INSTRUCTION MANUAL TABLE OF CONTENTS (continuation) CHAPTER 4: STORAGE 1. PROCEDURE CHAPTER 5: SERVICING Page 1. PERIODIC INSPECTION INSTRUMENT RECERTIFICATION APPENDIX: ENGINEERING SPECIFICATIONS SECTION 1. ALTIMETER SECTION 2. AIRSPEED INDICATOR SECTION 3. VERTICAL SPEED INDICATOR / 168 / 169 Rev. A Page xiii

15 1. PUBLICATION BREAKDOWN 1811G / H INSTRUCTION MANUAL INTRODUCTION This instruction manual establishes the operation standards for the 1811G / H Pitot-Static Test Set. Its purpose is to provide sufficient information for the personnel unfamiliar with this unit to understand this equipment, identify its parts, and operate it in accordance with proper procedures, operating techniques, precautions and limitations. 2. INFORMATION PROVIDED WITH THE UNIT Besides this User Instruction Manual, the 1811HA / GA Test Set is provided with the four items described below. A. An identification label, located on the front bulkhead of the Test Set, provides the following information: Manufacturer Name Designation of Equipment Equipment Part Number Equipment Model Number Equipment Serial Number Equipment Modification (if applicable) Equipment Options (if applicable) B. The Owner's Warranty Registration card, (Figure 1), which is to be completed by the owner and returned to the Barfield within ten (10) days of purchase to insure validation of the warranty. Figure 1 OWNER WARRANTY REGISTRATION CARD / 168 / 169 Rev. A Page 1 of 63

16 1811G / H INSTRUCTION MANUAL C. The Limited Warranty Statement Card, (Figure 2), which lists the manufacturer's obligation to the original purchaser. Figure 2 LIMITED WARRANTY STATEMENT CARD D. Each new or re-certified unit is delivered with a Certificate that shows the date when the unit was tested by the manufacturer, its serial number, and when the next certification is due. This certificate confirms that the unit performed according to its design specifications. 3. RECERTIFICATION The Test Sets P/Ns , , and have a 6-month recertification period when analog instruments are installed. It is strongly recommended that the manufacturer, Barfield Inc., service the Test Set. This will ensure that all applicable engineering change orders are incorporated during the required maintenance or recertification procedure. Note: It is important that the customer ensures the Test Set is in compliance with the Recertification requirement / 168 / 169 Rev. A Page 2 of 63

17

18

19

20

21

22

23

24 THIS PAGE INTENTIONALLY LEFT BLANK

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48 THIS PAGE INTENTIONALLY LEFT BLANK

49

50 THIS PAGE INTENTIONALLY LEFT BLANK

51

52

53 1811D INSTRUCTION MANUAL APPENDIX BARFIELD INC. ENGINEERING SPECIFICATIONS Note: For information on compliance with FAR , refer to Barfield document, SECTION 1: ALTIMETER SECTION 2: AIRSPEED INDICATOR SECTION 3: VERTICAL SPEED INDICATOR C APPENDIX Dec / 16 / 08 Page 35 of 59

54 THIS PAGE INTENTIONALLY LEFT BLANK

55 1811D INSTRUCTION MANUAL SECTION 1. ALTIMETER The following engineering specification (Document No , dated 7/24/91) details the performance requirements of the pressure sensitive altimeters used by Barfield, Inc. to manufacture ground support test equipment C APPENDIX Dec / 16 / 08 Page 37 of 59

56 THIS PAGE INTENTIONALLY LEFT BLANK

57

58

59

60

61

62 THIS PAGE INTENTIONALLY LEFT BLANK

63 1811D INSTRUCTION MANUAL SECTION 2. AIRSPEED INDICATOR The following engineering specification (Barfield Document No A0025, dated 1/8/90) details the performance requirements of the pitot static pressure type airspeed indicators used by Barfield, Inc. to manufacture ground support test equipment C APPENDIX Dec / 16 / 08 Page 45 of 59

64 THIS PAGE INTENTIONALLY LEFT BLANK

65

66

67

68

69

70 THIS PAGE INTENTIONALLY LEFT BLANK

71 1811D INSTRUCTION MANUAL SECTION 3. VERTICAL SPEED INDICATOR The following engineering specification (Document A0025 dated 1/8/90) details performance requirements of the pressure actuated vertical speed indicators used by Barfield, Inc. to manufacture ground support test equipment C APPENDIX Dec / 16 / 08 Page 53 of 59

72 THIS PAGE INTENTIONALLY LEFT BLANK

73

74

75

76

77 THIS PAGE INTENTIONALLY LEFT BLANK