TIBCO ActiveMatrix BusinessWorks Error Codes. Software Release 5.7 December 2008

Transcription

1 TIBCO ActiveMatrix BusinessWorks Error Codes Software Release 5.7 December 2008

2 Important Information SOME TIBCO SOFTWARE EMBEDS OR BUNDLES OTHER TIBCO SOFTWARE. USE OF SUCH EMBEDDED OR BUNDLED TIBCO SOFTWARE IS SOLELY TO ENABLE THE FUNCTIONALITY (OR PROVIDE LIMITED ADD-ON FUNCTIONALITY) OF THE LICENSED TIBCO SOFTWARE. THE EMBEDDED OR BUNDLED SOFTWARE IS NOT LICENSED TO BE USED OR ACCESSED BY ANY OTHER TIBCO SOFTWARE OR FOR ANY OTHER PURPOSE. USE OF TIBCO SOFTWARE AND THIS DOCUMENT IS SUBJECT TO THE TERMS AND CONDITIONS OF A LICENSE AGREEMENT FOUND IN EITHER A SEPARATELY EXECUTED SOFTWARE LICENSE AGREEMENT, OR, IF THERE IS NO SUCH SEPARATE AGREEMENT, THE CLICKWRAP END USER LICENSE AGREEMENT WHICH IS DISPLAYED DURING DOWNLOAD OR INSTALLATION OF THE SOFTWARE (AND WHICH IS DUPLICATED IN LICENSE.PDF) OR IF THERE IS NO SUCH SOFTWARE LICENSE AGREEMENT OR CLICKWRAP END USER LICENSE AGREEMENT, THE LICENSE(S) LOCATED IN THE LICENSE FILE(S) OF THE SOFTWARE. USE OF THIS DOCUMENT IS SUBJECT TO THOSE TERMS AND CONDITIONS, AND YOUR USE HEREOF SHALL CONSTITUTE ACCEPTANCE OF AND AN AGREEMENT TO BE BOUND BY THE SAME. This document contains confidential information that is subject to U.S. and international copyright laws and treaties. No part of this document may be reproduced in any form without the written authorization of TIBCO Software Inc. TIB, TIBCO, TIBCO Adapter, Predictive Business, Information Bus, The Power of Now, TIBCO ActiveMatrix BusinessWorks, TIBCO Rendezvous, TIBCO Administrator, TIBCO Enterprise Message Service, TIBCO InConcert, TIBCO Policy Manager, and TIBCO Hawk are either registered trademarks or trademarks of TIBCO Software Inc. in the United States and/or other countries. All other product and company names and marks mentioned in this document are the property of their respective owners and are mentioned for identification purposes only. THIS SOFTWARE MAY BE AVAILABLE ON MULTIPLE OPERATING SYSTEMS. HOWEVER, NOT ALL OPERATING SYSTEM PLATFORMS FOR A SPECIFIC SOFTWARE VERSION ARE RELEASED AT THE SAME TIME. SEE THE README.TXT FILE FOR THE AVAILABILITY OF THIS SOFTWARE VERSION ON A SPECIFIC OPERATING SYSTEM PLATFORM. THIS DOCUMENT IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. THIS DOCUMENT COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BE INCORPORATED IN NEW EDITIONS OF THIS DOCUMENT. TIBCO SOFTWARE INC. MAY MAKE IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED IN THIS DOCUMENT AT ANY TIME. THE CONTENTS OF THIS DOCUMENT MAY BE MODIFIED AND/OR QUALIFIED, DIRECTLY OR INDIRECTLY, BY OTHER DOCUMENTATION WHICH ACCOMPANIES THIS SOFTWARE, INCLUDING BUT NOT LIMITED TO ANY RELEASE NOTES AND "READ ME" FILES. Copyright TIBCO Software Inc. ALL RIGHTS RESERVED. TIBCO Software Inc. Confidential Information

3 iii Contents Preface v Related Documentation vi TIBCO ActiveMatrix BusinessWorks Documentation vi Other TIBCO Product Documentation vii Typographical Conventions viii How to Contact TIBCO Customer Support x Chapter 1 Process Engine Process Engine Error Codes Chapter 2 Common Errors Common Error Codes Chapter 3 XPath XPath Error Codes Chapter 4 ActiveEnterprise Adapter Palette ActiveEnterprise Adapter Error Codes Chapter 5 File Palette File Error Codes Chapter 6 FTP Palette FTP Error Codes Chapter 7 General Activities Palette General Activities Error Codes Chapter 8 HTTP Palette HTTP Error Codes Chapter 9 Java Palette Java Error Codes

4 iv Contents Chapter 10 JDBC Palette JDBC Error Codes Chapter 11 JMS Palette JMS Error Codes Chapter 12 Mail Palette Mail Error Codes Chapter 13 Manual Work Palette Manual Work Error Codes Chapter 14 Parse Palette Parse Error Codes Chapter 15 Rendezvous Palette TIBCO Rendezvous Error Codes Chapter 16 SOAP Palette SOAP Error Codes Chapter 17 TCP Palette TCP Error Codes Chapter 18 Transaction Palette Transaction Error Codes Chapter 19 XML Activities Palette XML Error Codes

5 v Preface This manual lists the error codes that can be returned by TIBCO ActiveMatrix BusinessWorks. Topics Related Documentation, page vi Typographical Conventions, page viii How to Contact TIBCO Customer Support, page x

6 vi Related Documentation Related Documentation This section lists documentation resources you may find useful. TIBCO ActiveMatrix BusinessWorks Documentation The following documents form the TIBCO ActiveMatrix BusinessWorks documentation set: TIBCO ActiveMatrix BusinessWorks Concepts Read this manual before reading any other manual in the documentation set. This manual describes terminology and concepts of TIBCO ActiveMatrix BusinessWorks, and the other manuals in the documentation set assume you are familiar with the information in this manual. TIBCO ActiveMatrix BusinessWorks Getting Started This manual steps you through a very simple example of designing, deploying, and monitoring a ActiveMatrix BusinessWorks process. ActiveMatrix BusinessWorks Process Design Guide This manual describes how to create, edit, and test business processes using TIBCO ActiveMatrix BusinessWorks. ActiveMatrix BusinessWorks Palette Reference This manual describes each of the palettes available in TIBCO ActiveMatrix BusinessWorks. TIBCO ActiveMatrix BusinessWorks Administration This manual describes how to use TIBCO Administrator to deploy, manage, and monitor TIBCO ActiveMatrix BusinessWorks processes. TIBCO ActiveMatrix BusinessWorks Installation Read this manual for information on installing one or more components of ActiveMatrix BusinessWorks and setting up a ActiveMatrix BusinessWorks domain. This manual describes errors returned by TIBCO ActiveMatrix BusinessWorks. TIBCO ActiveMatrix BusinessWorks Release Notes Read the release notes for a list of new and changed features. This document also contains lists of known issues and closed issues for this release.

7 Preface vii Other TIBCO Product Documentation TIBCO ActiveMatrix BusinessWorks is used with other products. You may find it useful to read the documentation for the following TIBCO products: TIBCO Designer software: TIBCO Designer is an easy to use graphical user interface for design-time configuration of TIBCO applications. TIBCO Designer includes online help for each palette. TIBCO Administrator software: TIBCO Administrator is the monitoring and managing interface for new-generation TIBCO products such as TIBCO ActiveMatrix BusinessWorks. TIBCO Adapter software: Third-Party Documentation

8 viii Typographical Conventions Typographical Conventions The following typographical conventions are used in this manual. Table 1 General Typographical Conventions Convention TIBCO_HOME ENV_HOME BW_HOME code font bold code font Use Many TIBCO products must be installed within the same home directory. This directory is referenced in documentation as TIBCO_HOME. The value of TIBCO_HOME depends on the operating system. For example, on Windows systems, the default value is C:\tibco. Other TIBCO products are installed into an installation environment. Incompatible products and multiple instances of the same product are installed into different installation environments. The directory into which such products are installed is referenced in documentation as ENV_HOME. The value of ENV_HOME depends on the operating system. For example, on Windows systems the default value is C:\tibco. TIBCO ActiveMatrix BusinessWorks installs into a directory within TIBCO_HOME. This directory is referenced in documentation as BW_HOME. The value of BW_HOME depends on the operating system. For example on Windows systems, the default value is C:\tibco\bw\5.7. Code font identifies commands, code examples, filenames, pathnames, and output displayed in a command window. For example: Use MyCommand to start the foo process. Bold code font is used in the following ways: In procedures, to indicate what a user types. For example: Type admin. In large code samples, to indicate the parts of the sample that are of particular interest. In command syntax, to indicate the default parameter for a command. For example, if no parameter is specified, MyCommand is enabled: MyCommand [enable disable]

9 Preface ix Table 1 General Typographical Conventions (Cont d) Convention italic font Key combinations Use Italic font is used in the following ways: To indicate a document title. For example: See TIBCO ActiveMatrix BusinessWorks Concepts. To introduce new terms For example: A portal page may contain several portlets. Portlets are mini-applications that run in a portal. To indicate a variable in a command or code syntax that you must replace. For example: MyCommand pathname Key name separated by a plus sign indicate keys pressed simultaneously. For example: Ctrl+C. Key names separated by a comma and space indicate keys pressed one after the other. For example: Esc, Ctrl+Q. The note icon indicates information that is of special interest or importance, for example, an additional action required only in certain circumstances. The tip icon indicates an idea that could be useful, for example, a way to apply the information provided in the current section to achieve a specific result. The warning icon indicates the potential for a damaging situation, for example, data loss or corruption if certain steps are taken or not taken.

10 x How to Contact TIBCO Customer Support How to Contact TIBCO Customer Support For comments or problems with this manual or the software it addresses, please contact TIBCO Support as follows. For an overview of TIBCO Support, and information about getting started with TIBCO Support, visit this site: If you already have a valid maintenance or support contract, visit this site: Entry to this site requires a user name and password. If you do not have a user name, you can request one.

11 1 Chapter 1 Process Engine This chapter lists error codes returned by the TIBCO ActiveMatrix BusinessWorks process engine. Topics Process Engine Error Codes, page 2

12 2 Chapter 1 Process Engine Process Engine Error Codes BWENGINE : %1 Description: used for logging generic exception, detailed message code not provided Depends on content of exception BWENGINE : %1 Description: used when underlying support reported an error Depends on content of exception BWENGINE : %1 Description: used for startup failures Depends on failure details BWENGINE : %1 Description: used for shutdown failures Depends on failure details

13 Process Engine Error Codes 3 BWENGINE : Load Error Description: Error loading project Depends on failure details BWENGINE : Load Error: ref=%1, class=%2 Description: Error loading project Depends on failure details BWENGINE : useseparatethread may only be called from within the init() method Description: useseparatethread may only be called from within the init() method Correct activity code BWENGINE : Cannot find specified Engine.Database.Configuration: %1 Description: Cannot find specified Engine.Database.Configuration Re-deploy specifying correct database shared configuration

14 4 Chapter 1 Process Engine BWENGINE : Access error for Engine.Database.Configuration: %1 Description: Access error for Engine.Database.Configuration BWENGINE : Plugin agent class name not specified Description: Plugin agent class name not specified Correct plugin definition file BWENGINE : Error processing plugin agent [%1] Description: Error processing plugin agent BWENGINE : Initialization error in [%1/%2] Description: The activity init method detected an error Depends on content of "caused by" exception

15 Process Engine Error Codes 5 BWENGINE : Termination error in [%1/%2] Description: The activity destroy method detected an error Depends on content of "caused by" exception BWENGINE : process initialization failed for %1 Description: The specified process definition could not be initialized. It is unavailable for use. Depends on content of "caused by" exception BWENGINE : Could not find process definition: %1 Description: The specified process definition could not found. Process loading may have failed or process loading may not have been requested or may be using incorrect process reference. BWENGINE : failed to spawn called process Description: The Call Process activity, spawn option, failed.

16 6 Chapter 1 Process Engine BWENGINE : failed to execute called process Description: The Call Process activity failed to execute called process BWENGINE : Process definition name not specified Description: Process name is required, but has not been specified Enter required item. BWENGINE : Can not checkpoint in middle of transaction Description: A checkpoint may not occur within a transaction group Correct process design BWENGINE : Activation error with process starter [%1] Description: Activation error with a process starter Depends on content of exception

17 Process Engine Error Codes 7 BWENGINE : Checkpoint failed Description: Checkpoint attempt failed Depends on content of exception BWENGINE : Error restarting process %1 from checkpoint Description: Error trying to restart process from checkpoint Depends on content of exception. May be that checkpoint was taken on a different version of BW. BWENGINE : Error restarting checkpoint, process definition not found: %1 Description: Can not find the process definition needed by the checkpointed process Make sure same processes are deployed when restarting engine as when checkpoint was taken. BWENGINE : %1 Unable to delete checkpoint Description: Failed to deleted checkpoint Depends on content of exception. If checkpoint not deleted, job could be restarted on next engine startup.

18 8 Chapter 1 Process Engine BWENGINE : Failed to get next job id block Description: Can not get the next block of job ids. Depends on content of exception BWENGINE : Error with fault tolerant setup Description: Error with fault tolerant setup. Engine will not start. Depends on content of exception BWENGINE : Notify error: group = %1, key = %2 Description: Notify unable to complete wakeup of waiting entity Depends on content of exception BWENGINE : Deactivation error with process starter [%1] Description: Deactivation error with a process starter Depends on content of exception

19 Process Engine Error Codes 9 BWENGINE : Activity timed out Description: Activity did not complete execution within the specified time limit BWENGINE : Input data invalid Description: Activity input data validation error BWENGINE : Output data invalid Description: Activity output data validation error BWENGINE : Error output data invalid Description: Activity error output data vailidation error

20 10 Chapter 1 Process Engine BWENGINE : Activity providing output data but none is expected Description: Activity has output when none was expected. BWENGINE : transition cycle detected in [%1/%2] Description: This process contains an illegal transition cycle This process does not allow transition cycles BWENGINE : error on exit from activity, no matching transition Description: No transition out of activity evaluated true. This generates an Error condition. Add transition or check conditions of existing transitions BWENGINE : error on exit from activity, too many matching transitions Description: Multiple transitions may not be taken when transition cycles are allowed. This process allows transition cycles and does not allow two transitions from any activity to be true at the same time.

21 Process Engine Error Codes 11 BWENGINE : Repository not found: %1 Description: Can not locate specified repository Make sure using correct reference and server is available BWENGINE : Repository not specified Description: No repository location specified Specify location of repository BWENGINE : Variable name not specfied Description: Variable name to set has not been specified Specify variable name in configuration panel BWENGINE : Undefined variable [%1] Description: Unable to find definition for specified variable Please look at exception for more details

22 12 Chapter 1 Process Engine BWENGINE : Mapping Error Description: Problem find with mapping Please look at mapping for more details BWENGINE : Configured Fault not found [%1] Description: Can not find the specified fault name BWENGINE : Error resolving Fault [%1] Description: Error encountered resolving specified fault name BWENGINE : File not found [%1] Description: Can not find specified filename

23 Process Engine Error Codes 13 BWENGINE : Pager can not load [%1] Description: Can not load the page file for the specified job BWENGINE : Shutdown due to startup error Description: Engine shutdown due to startup error BWENGINE : %1 Error in [%2/%3] Description: BWENGINE : Error in [%1/%2] Description:

24 14 Chapter 1 Process Engine BWENGINE : Error restarting [%1], can not acquire lock [%2] Description: Error trying to restart process from checkpoint Process requires lock that is already acquired. BWENGINE : Activation error with plugin agent [%1] Description: Activation error with plugin agent Depends on content of exception BWENGINE : Unable to create trace object Description: Unable to create trace object Depends on content of exception BWENGINE : Configuration error on input type for [%1]: %2 Description: Can not load process input type Depends on content of details

25 Process Engine Error Codes 15 BWENGINE : Configuration error on output type for [%1]: %2 Description: Can not load process output type Depends on content of details BWENGINE : Configuration error on error output type for [%1]: %2 Description: Can not load process error output type Depends on content of details BWENGINE : Configuration error on user process variables for [%1]: %2 Description: Can not load user process variable types Depends on content of details BWENGINE : Loop index slot name already used: [%1] Description: Loop index slot name already used Index variable name already taken. Specify another name not already in use.

26 16 Chapter 1 Process Engine BWENGINE : Invalid loop index slot name: [%1] Description: Invalid loop index slot name Specify a valid variable name BWENGINE : Accumulate output variable name already used: %1 Description: Accumulate output variable name already used Accumulate variable name already taken. Specify another name not already in use. BWENGINE : Invalid accumulate output variable name: %1 Description: Invalid accumulate output variable name Specify a valid variable name BWENGINE : No output to accumulate from activity: %1 Description: No output to accumulate from activity Can only accumulate output from an activity that has output

27 Process Engine Error Codes 17 BWENGINE : Bad activity name for accumulate output: %1 Description: Bad activity name for accumulate output Can only accumulate output from an activity within the group BWENGINE : Slot name already used: %1 Description: Slot name already used Slot name already used. Specify another name not already in use. BWENGINE : Process variable schema error Description: The schema for a process variable had an error Please look at the process variables tab for more information BWENGINE : Process Start schema error Description: The Output schema for the process start had an error Please look at the Output Editor tab of the process start for more information

28 18 Chapter 1 Process Engine BWENGINE : Process End schema error Description: The Input schema for the process end had an error Please look at the Input Editor tab of the process end for more information BWENGINE : Process Fault schema error Description: An process fault/error schema had an error Please look at the Error Schemas tab of the process end for more information BWENGINE : Call process input failed validation Description: The input data passed to the Call Process activity did not conform to the input of the called process Please check the input mappings for the Call Process activity BWENGINE : Call process results failed validation Description: The process that was called returned results that were not expected by the Call Process activity Please check the input mappings for the End activity in the process that was called

29 Process Engine Error Codes 19 BWENGINE : The override process [%1] expects different input than the process the Call Process activity was modeled on [%2] Description: The Process Name Dynamic Override option pointed, at run time, to a process with different input than the model process used to configure the activity at design time Please check the Process Name Dynamic Override expression in the activity configuration BWENGINE : The process [%1] is not a callable process Description: The specified process is not a callable process (it has a process starter instead) Please check the process names in the activity configuration BWENGINE : Multi-engine shared variable or lock requires engine configured to use database Description: Multi-engine shared variable or lock requires engine configured to use database Configure engine to use database BWENGINE : Undefined reference [%1] Description: Unable to find definition for specified reference Please look at exception for more details

30 20 Chapter 1 Process Engine BWENGINE : Unable to parse initial value Description: Unable to parse initial value Correct error in definition of initial value BWENGINE : Persistent storage error Description: Problem accessing persistent storage Please look at exception for more details BWENGINE : Variable not set Description: Variable not set and has no initial value Set variable before use or define initial value BWENGINE : Shared variable schema error Description: The schema for a shared variable had an error Please look at exception for more details

31 Process Engine Error Codes 21 BWENGINE : Error with Transaction Manager [%1] Description: Error with the specified Transaction Manager Please look at exception for more details BWENGINE : Transaction Manager not specified Description: Transaction Manager not specified Specify transaction manager BWENGINE : Duplicate key [%1] already used by job [%2] Description: Another job has already registered this key BWENGINE : Only one duplicate key allowed per job Description: This job has already registered another key

32 22 Chapter 1 Process Engine BWENGINE : XA Resource not available from [%1] Description: The specified event source did not provide an XA Resource Check event source configuration BWENGINE : Event context from [%1] not found Description: The specified event source did not provide an event context Check event source configuration BWENGINE : Checkpoint verify failed Description: Attempt to verify checkpoint failed Depends on content of exception BWENGINE : Transaction rollback error Description: Exception thrown during transaction rollback Depends on content of exception

33 Process Engine Error Codes 23 BWENGINE : Configuration error, checkpoint can not join transaction Description: Configuration error, checkpoint can not join transaction Correct configuration BWENGINE : Engine commands are not enabled Description: Engine commands are not enabled so Engine Command activity can not be used Enable engine commands BWENGINE : Error invoking engine command [%1] Description: Error invoking specified engine command Please look at exception for more details BWENGINE : Library alias undefined [%1] Description: Cannot resolve library alias Provide valid library path for this alias

34 24 Chapter 1 Process Engine BWENGINE : Library not found for alias [%1], path [%2] Description: Can not find library for specifed alias Provide valid library path for this alias BWENGINE : Invalid library file type for alias [%1], path [%2] Description: Library for this alias has invalid file type Provide valid library path for this alias BWENGINE : Library error for alias [%1], path [%2] Description: Library error for this alias Please look at exception for more details BWENGINE : Can not checkpoint in middle of a critical section Description: A checkpoint may not occur within a critical section group Correct process design

35 Process Engine Error Codes 25 BWENGINE : Required Lock object not specified Description: A multi-group critical section requires a lock object Configure a lock object BWENGINE : Process id [%1] not found Description: No process found with matching process id Use existing process id BWENGINE : Fault to catch has not been specified Description: Specify fault or select all BWENGINE : Duplicate catch activities [%1] [%2] Description: More than one catch activity with the same configuration Reconfigure catch activities so that they don't conflict with each other

36 26 Chapter 1 Process Engine BWENGINE : Can not create/access pager directory [%1] Description: Problem encountered creating or accessing the pager directory Check available file space and permissions BWENGINE : Transition condition XPath has an error Description: Please look at the transition for more details BWENGINE : Loop over expression error Description: Please look at the group for more details BWENGINE : Repeat condition expression error Description: Please look at the group for more details

37 Process Engine Error Codes 27 BWENGINE : Error condition expression error Description: Please look at the group for more details BWENGINE : Variable [%1] has not been initialized Description: Tried to use variable contents that has not been initialized Initialize variable before using contents BWENGINE : Join failure exception Description: Join condition false and join exception not suppressed May be desired result. If not, redesign process definition accordingly. BWENGINE : Join condition error Description: Join condition XPATH expression has an error Correct join condition

38 28 Chapter 1 Process Engine BWENGINE : Partition [%1] not loaded Role: warnrole Description: Partition listed to load has not been loaded BWENGINE : no path from start to this point Role: warnrole Description: This point can not be reached BWENGINE : Mapping Warning Role: warnrole Description: Potential problem find with mapping Please look at mapping for more details BWENGINE : Checkpoint not included with transaction Role: warnrole Description: Checkpoint taken before commit. Restart could happen before or after commit. Reconfigure checkpoint database configuration

39 Process Engine Error Codes 29 BWENGINE : Join condition warning Description: Join condition XPATH expression has a warning Verify join condition BWENGINE : Process Engine %1 Role: inforole Description: process engine versionn BWENGINE : Engine %1 started Role: inforole Description: engine started BWENGINE : Engine %1 started in backup mode Role: inforole Description: Indicates the named engine has been started FT backup mode

40 30 Chapter 1 Process Engine BWENGINE : Engine %1 %2 Role: inforole Description: Fault Tolerant actions BWENGINE : Engine %1 terminating Role: inforole Description: engine terminating BWENGINE : Process Started Role: inforole Description: A new process has been started BWENGINE : Process started tracking=%1 Role: inforole Description: A new process has been started with associated tracking info

41 Process Engine Error Codes 31 BWENGINE : BW Plugins: %1 Role: inforole Description: BW plugins.jar version BWENGINE : XML Support: %1 Role: inforole Description: TIBCOXML version BWENGINE : Java version: %1 %2 Role: inforole Description: Java VM name and version BWENGINE : OS version: %1 %2 %3 Role: inforole Description: OS arch, name and version

42 32 Chapter 1 Process Engine BWENGINE : Tibrv string encoding: %1 Role: inforole Description: Tibrv string encoding BWENGINE : Starting delayed shutdown, max-delay=[%1], wait-for-checkpoints=[%2] Role: inforole Description: Processing delayed shutdown command BWENGINE : Statistics collection started, recording to [%1] Role: inforole Description: Starting activity statistics collection and recording to specified file BWENGINE : Statistics collection stopped Role: inforole Description: Stopping activity statistics collection and recording

43 Process Engine Error Codes 33 BWENGINE : Restarting [%1] for process [%2] Role: inforole Description: Restarting process instance from checkpoint BWENGINE : Found [%1] checkpoint(s) to be restarted Role: inforole Description: Shows number of checkpoints available to be restarted BWENGINE : Found [%1] checkpoint(s) auto restart NOT selected Role: inforole Description: Shows number of checkpoints available, but not to be auto restarted BWENGINE : Found [%1] recoverable checkpoint(s) preserved after process faulted Role: inforole Description: Shows number of checkpoints preserved after process terminated with a fault

44 34 Chapter 1 Process Engine BWENGINE : Resource [%1] changed its state from [%2] to [%3]. Role: inforole Description: Resource state change information BW-EXT-LOG : %1 Category: LOG4J Description: Error message logged by third party application or java code using LOG4J api Refer to your third party application or java code BW-EXT-LOG : %1 Category: LOG4J Description: Fatal error message logged by third party application or java code using LOG4J api Refer to your third party application or java code BW-EXT-LOG : Unable to write the message logged by third party application or java code to TIBCO BusinessWorks log file. %1 Category: LOG4J Description: Error occurred while trying to forward the message logged by third party application or java code to TIBCO BusinessWorks log file

45 Process Engine Error Codes 35 BW-EXT-LOG : %1 Role: warnrole Category: LOG4J Description: Warning message logged by third party application or java code using LOG4J api Refer to your third party application or java code BW-EXT-LOG : %1 Role: inforole Category: LOG4J Description: Info message logged by third party application or java code using LOG4J api Refer to your third party application or java code BW-EXT-LOG : %1 Role: inforole Category: LOG4J Description: Message logged by third party application or java code using LOG4J api Refer to your third party application or java code BW-EXT-LOG : %1 Role: debugrole Category: LOG4J Description: Debug message logged by third party application or java code using LOG4J api Refer to your third party application or java code

46 36 Chapter 1 Process Engine

47 37 Chapter 2 Common Errors Some error codes are common across activities within different palettes. This chapter describes these errors. Topics Common Error Codes, page 38

48 38 Chapter 2 Common Errors Common Error Codes BW-COMMON : Configuration error in field [ %1 ] Description: Please make sure that the specified field has a valid value Please update the cofiguration data BW-COMMON : Configuration error in field [ %1 ] expecting a valid [ %2 ] Description: Please make sure that the specified field has a valid value as indicated Please update the cofiguration data for the field with value of the indicated type BW-COMMON : Configuration error in field [ %1 ] expecting a value between [ %2 ] and [ %3 ] Description: Please make sure that the specified field has a valid value as indicated Please update the cofiguration data

49 Common Error Codes 39 BW-COMMON : Configuration error in field [ %1 ] the value must be non empty Description: Please make sure that the specified field has a valid value as indicated Please update the cofiguration data BW-COMMON : Configuration error in field [ %1 ] the value must be a valid [ %2 ] Description: Please make sure that the specified field has a valid value as indicated Please update the cofiguration data BW-COMMON : Configuration error in field [ %1 ] the value must be a valid URI Description: Please make sure that the specified field is a valid URI Please specify a valid URI BW-COMMON : Configuration error in field [ %1 ] the value must be a valid URL Description: Please make sure that the specified field is a valid URL Please specify a valid URL

50 40 Chapter 2 Common Errors BW-COMMON : Configuration error in field [ %1 ] the value must be a valid hostname Description: Please make sure that the specified field is a valid hostname Please specify a valid hostname BW-COMMON : Configuration error in field [ %1 ] the value must be a valid port number Description: Please make sure that the specified field is a valid port number Please specify a valid port number BW-COMMON : Configuration error in field [ %1 ] the value must be a valid number Description: Please make sure that the specified field is a valid number Please specify a valid number BW-COMMON : Configuration error in field [ %1 ] the value must be a valid timeout value Description: Please make sure that the specified field is a valid timeout value Please specify a valid number between 1 and 32000

51 Common Error Codes 41 BW-COMMON : Configuration error in field [ %1 ] the value must be a valid NCName Description: Please make sure that the specified field is a valid NCName type from XML specification Please specify a valid NCName BW-COMMON : Configuration error in field [ %1 ] the value must be a valid XPath expression Description: Please make sure that the specified field is a valid XPath expression Please specify a valid XPath BW-COMMON : Configuration error in field [ %1 ] the value must be a valid java classname Description: Please make sure that the specified field is a valid Class name Please specify a valid Java Class name BW-COMMON : Configuration error in field [ %1 ] the value must be a valid file name Description: Please make sure that the specified field is a valid file name Please specify a valid file name

52 42 Chapter 2 Common Errors BW-COMMON : Configuration error in field [ %1 ] the value must be a valid directory name Description: Please make sure that the specified field is a valid directory name Please specify a valid directory name BW-COMMON : Configuration error in field [ %1 ] the value must be a valid event source name Description: Please make sure that the specified field is a valid event source name Please specify a valid event source name BW-COMMON : Configuration error in field [ %1 ] the value must be a valid event source name of type [ %2 ] Description: Please make sure that the specified field is a valid event source name of the specified kind Please specify a valid event source name of the specified kind BW-COMMON : Configuration error in field [ %1 ] the value must be a valid floating point number Description: Please make sure that the specified field is a valid floating point number Please specify a valid floating point number

53 Common Error Codes 43 BW-COMMON : Configuration error in field [ %1 ] the value must be a valid double number Description: Please make sure that the specified field is a valid double Please specify a valid double BW-COMMON : Configuration error in field [ %1 ] the value must be a valid encoding Description: Please make sure that the specified field is a valid encoding Please specify a valid encoding BW-COMMON : Configuration error in field [ %1 ] the specified encoding [ %2 ] not supported Description: Please make sure that the specified field is a valid encoding Please specify a valid encoding BW-COMMON : Configuration error in field [ %1 ] the value must be a valid namespace URI Description: Please make sure that the specified field is a valid namespace URI Please specify a valid namespace URI

54 44 Chapter 2 Common Errors BW-COMMON : Configuration error in field [ %1 ] the value must be a valid schema element Description: Please make sure that the specified field is a valid schema element Please specify a valid schema element BW-COMMON : Configuration error in field [ %1 ] the value must be a valid schema type Description: Please make sure that the specified field is a valid schema type Please specify a valid schema type BW-COMMON : Configuration error in field [ %1 ] the value must be a valid HTTP connection resource Description: Please make sure that the specified field is a valid HTTP connection Please specify a valid HTTP Connection resource BW-COMMON : Configuration error in field [ %1 ] the value must be a valid TIBRV connection resource Description: Please make sure that the specified field is a valid TIBRV connection Please specify a valid TIBRV Connection resource

55 Common Error Codes 45 BW-COMMON : Configuration error in field [ %1 ] the value must be a valid JDBC connection resource Description: Please make sure that the specified field is a valid JDBC connection Please specify a valid JDBC Connection resource BW-COMMON : Configuration error in field [ %1 ] the value must be a valid JMS connection resource Description: Please make sure that the specified field is a valid JMS connection Please specify a valid JMS Connection resource BW-COMMON : Configuration error in field [ %1 ] the value must be a valid IC Server connection Description: Please make sure that the specified field is a valid IC Server connection Please specify a valid IC Server Connection resource BW-COMMON : Configuration error in field [ %1 ] the value must be a valid WSDL message QName Description: Please make sure that the specified field is a valid WSDL message QName Please specify a valid WSDL message QName

56 46 Chapter 2 Common Errors BW-COMMON : Configuration error in field [ %1 ] the value must be a valid WSDL porttype QName Description: Please make sure that the specified field is a valid WSDL porttype QName Please specify a valid WSDL porttype QName BW-COMMON : Configuration error in field [ %1 ] the value must be a valid WSDL Service QName Description: Please make sure that the specified field is a valid WSDL Service QName Please specify a valid WSDL Service QName BW-COMMON : Configuration error in field [ %1 ] the value must be a valid WSDL Port Name in service [ %2 ] Description: Please make sure that the specified field is a valid WSDL Port Name Please specify a valid WSDL Port Name BW-COMMON : Configuration error in field [ %1 ] the value must be a valid WSDL Operation Name in porttype [ %2 ] Description: Please make sure that the specified field is a valid WSDL Operation Name Please specify a valid WSDL Operation Name

57 Common Error Codes 47 BW-COMMON : Configuration error in field [ %1 ] the value must be a valid proxy resource s Description: Please make sure that the specified field is a valid HTTP Proxy Name Please specify a valid HTTP Proxy Resource Name BW-COMMON : The server certificate [ %1 ] not found s Description: The certificate path is invalid Please specify the valid certificate file BW-COMMON : An exception is received [ %1 ] s Description: Unexpected error Please contact TIBCO support BW-COMMON : Error initializing TIBCrypt [ %1 ] s Description: Unexpected error Please contact TIBCO support

58 48 Chapter 2 Common Errors BW-COMMON : The client key [ %1 ] not found s Description: The key file path may be invalid Please specify the valid key file BW-COMMON : Server certificate is invalid s Description: The specified certificate is invalid Please specify the valid certificate BW-COMMON : Configuration error in field [ %1 ] the specified transport is not supported Description: Please make sure that the specified field is a valid transport type Please contact TIBCO support to get a list of transport protocols supported for this activity BW-COMMON : Configuration error. [ %1 ] s Description: Activity is not configured correctly Please check that the activity is configured correctly

59 Common Error Codes 49 BW-COMMON : Inline schema error. [ %1 ] s Description: There was an error resolving an inline schema, or there was an error with a reference from the inline to another schema resource. Please check the inline schema definition for errors. The error may not be in the inline schema itself, but in a schema resource that is used by the inline schema. BW-COMMON : Configuration error in field [ %1 ] the value must be a valid WSDL Operation Name in port [ %2 ] in service [ %3 ] Description: Please make sure that the specified field is a valid WSDL Operation Name Please specify a valid WSDL Operation Name BW-COMMON : Configuration error in field [ %1 ] the value must be a positive integer number Description: Please make sure that the specified field is a valid positive integer number Please specify a valid positive integer number

60 50 Chapter 2 Common Errors BW-COMMON : Configuration error: The metadate schema defined for the activity [ %1 ] cannot be locked Description: The metadate schema defined for an activity cannot be locked Please look at exception for more details BW-COMMON : The partner [ %1 ] doesn't implement the specified operation [ %2 ] Description: Please make sure that the interface implemented by the partner does define the specified operation Please specify a valid operation name BW-COMMON : Partner is not specified Description: Please specify a partner Check the configuration and make sure that a partner is specified BW-COMMON : Operation is not specified Description: Please specify an operation Check the configuration and make sure that an operation is specified

61 Common Error Codes 51 BW-COMMON : Service is not specified Description: Please specify a service Check the configuration and make sure that a service is specified BW-COMMON : Port is not specified Description: Please specify a port Check the configuration and make sure that a port is specified BW-COMMON : The service name [ %1 ] is not valid Description: Please specify a valid service name Check the configuration and make sure that the service has a valid name BW-COMMON : The port name [ %1 ] is not valid Description: Please specify a valid port name Check the configuration and make sure that the port has a valid name

62 52 Chapter 2 Common Errors BW-COMMON : The operation name [ %1 ] is not valid Description: Please specify a valid operation name Check the configuration and make sure that the operation has a valid name BW-COMMON : The binding type [ %1 ] is not supported Description: Please specify a valid binding Check the configuration and make sure that the binding is valid BW-COMMON : The namespace of the service is not specified Description: Please specify a valid namespace Check the configuration and make sure that the namespace of the service is specified BW-COMMON : The namespace of the service [ %1 ] is not valid Description: Please specify a valid namespace Check the configuration and make sure that the namespace of the service is valid

63 Common Error Codes 53 BW-COMMON : The namespace of the port [ %1 ] is not valid Description: Please specify a valid namespace Check the configuration and make sure that the namespace of the port is valid BW-COMMON : The port [ %1 ] doesn't have a binding or the binding associated with it is not valid Description: Please specify a valid binding Check the WSDL file and make sure that the port has a valid binding BW-COMMON : The port [ %1 ] doesn't have a PortType or the PortType associated with it is not valid Description: Please specify a valid PortType Check the WSDL file and make sure that the port has a valid PortType BW-COMMON : The NOTIFICATION MEP is not supported Description: Please specify either a REQUEST-RESPONSE or a ONE-WAY operation Check the style of the operation and make sure it is either REQUEST-RESPONSE or ONE_WAY

64 54 Chapter 2 Common Errors BW-COMMON : The SOLICIT-RESPONSE MEP is not supported Description: Please specify either a REQUEST-RESPONSE or a ONE-WAY operation Check the style of the operation and make sure it is either REQUEST-RESPONSE or ONE_WAY BW-COMMON : The Partner [ %1 ] is not valid Description: Please specify a valid partner name Check the configuration and make sure that a valid partner name is specified BW-COMMON : Either the Partner [ %1 ] or the Operation [ %2 ] is not valid Description: Please specify a valid partner name and a valid operation name Check the configuration and make sure that both a valid partner and a valid operation are specified BW-COMMON : The Event Source is not specified Description: Please specify a valid event source name Check the configuration and make sure that a valid event source name is specified

65 Common Error Codes 55 BW-COMMON : The Event Source [ %1 ] is not valid Description: Please specify a valid event source name Check the configuration and make sure that a valid event source name is specified BW-COMMON : A Reply activity cannot be used to reply to the selected Event Source. The operation implemented is a ONE-WAY operation Description: A Reply activity can be used only when the operation implemented by the selected Event Source has a REQUEST-RESPONSE message exchange pattern Please remove the Reply activity or associate it with a different Event Source BW-COMMON : Unexpected value [ %1 ] in the field [ %2 ] Description: Please make sure that the specified field has a valid value Please update the cofiguration data BW-COMMON : Input data error in field [ %1 ] expecting a valid [ %2 ] Description: Please make sure that the specified field has a valid value as indicated Please update the input data

66 56 Chapter 2 Common Errors BW-COMMON : Input data error in field [ %1 ] expecting a value between [ %2 ] and [ %3 ] Description: Please make sure that the specified field has a valid value as indicated Please update the cofiguration data BW-COMMON : Input data error in field [ %1 ] because [ %2 ] Description: Please make sure that the specified field has a valid value Please update the cofiguration data BW-COMMON : Input data error. [ %1 ] Description: Activity received incorrect value for the field(s) in the input tab. Reconfigure the TIBCO BusinessWorks process that contains this activity to provide the correct value for the input field(s). BW-COMMON : Output data error in field [ %1 ] Description: Please make sure that the specified field has a valid value Please update the cofiguration data

67 Common Error Codes 57 BW-COMMON : Output data error in field [ %1 ] expecting a valid [ %2 ] Description: Please make sure that the specified field has a valid value as indicated Please update the output data BW-COMMON : Output data error in field [ %1 ] expecting a value between [ %2 ] and [ %3 ] Description: Please make sure that the specified field has a valid value as indicated Please update the cofiguration data BW-COMMON : Output data error in field [ %1 ] because [ %2 ] Description: Please make sure that the specified field has a valid value Please update the cofiguration data BW-COMMON : Output data error in field [ %1 ] value cannot be null Description: Please make sure that the specified field has a valid value as indicated Please update the output data

68 58 Chapter 2 Common Errors BW-COMMON : Output data error in field [ %1 ] value is not serializable Description: Please make sure that the specified field has a valid value as indicated Please update the output data BW-COMMON : Error while serializing [ %1 ] message [ %2 ] Description: Error while serializing the message Please Contact TIBCO Support BW-COMMON : Error while deserializing [ %1 ] message [ %2 ] Description: Error while deserializing the message Please Contact TIBCO Support BW-COMMON : [ %1 ] operation timed out Description: Timeout error while waiting for reply Please check the remote server or increse the timeout value

69 Common Error Codes 59 BW-COMMON : Internal error occurred. [ %1 ] Description: Internal error has occured in the activity. Please contact TIBCO support BW-COMMON : Internal error occurred. Class=[ %1 ], Method=[ %2 ], Cause=[ %3 ] Description: Internal error has occured in the activity. Please contact TIBCO support BW-COMMON : Unable to get value for the global variable [ %1 ] Description: Unable to get value for the specified global variable Make sure that the specified global variable is defined. BW-COMMON : Unable to get value for the global variable [ %1 ] because [ %2 ] Description: Unable to get value for the specified global variable Make sure that the specified global variable is defined.

70 60 Chapter 2 Common Errors BW-COMMON : The global variable [ %1 ] is not defined Description: Unable to get value for the specified global variable Make sure that the specified global variable is defined. BW-MIME : Configuration error in field [ %1 ] the value if present, must be a valid directory name; the directory needs to have read/write permission Description: Please make sure that the specified field is a valid directory name (the field can be empty) with the necessary read/write permission Please specify a valid directory name (the field can be empty) with the necessary read/write permission

71 61 Chapter 3 XPath This chapter describes error codes that are returned due to errors in XPath expressions. Topics XPath Error Codes, page 62

72 62 Chapter 3 XPath XPath Error Codes XPATH : Null Content Description: XPATH : Expected non-repeating, got repeating Description: XPATH : Expected more than 1 Description: XPATH : Exceeds maximum occurrence Description:

73 XPath Error Codes 63 XPATH : Unexpected %1 Description: XPATH : No functions in namespace:%1 Description: XPATH : Cannot resolve prefix:%1 Description: XPATH : Cannot resolve function without prefix. Description: XPATH : No such function. Description:

74 64 Chapter 3 XPath XPATH : Expected 1 argument Description: XPATH : Expected %1 arguments Description: XPATH : Expected at least 1 argument Description: XPATH : Expected at least %1 arguments Description:

75 XPath Error Codes 65 XPATH : Expected %1 or %2 arguments Description: XPATH : Expected a node-set Description: XPATH : No matching %1 Description: XPATH : Variable not defined Description: XPATH : Interpreted as a double, rounded to: %1. Use a string constant for arbitrary precision.

76 66 Chapter 3 XPath Description: XPATH : Unterminated escape character. Use & for ampersand. Description: XPATH : XPath indexes are 1 based. Description: XPATH : Variable '%1' already defined in this template Description: XPATH : Illegal variable name Description:

77 XPath Error Codes 67 XPATH : The substituted type '%1' is not a sub-type of the element's type Description: XPATH : Cannot load the schema for the type substitution Description: XPATH : No such type in schema for the type substitution Description: XPATH : Element is abstract and cannot appear in a valid document Description: XPATH : Type is abstract and cannot appear in a valid document Description:

78 68 Chapter 3 XPath XPATH : This element is not allowed to be nil Description: XPATH : Cannot load the schema for the element Description: XPATH : Unexpected output, no such element in the schema Description: XPATH : Unexpected output, no such element in the current context Description: XPATH : Multiple schemas with namespace '%1' found, and no import to disambiguate

79 XPath Error Codes 69 between them. Description: XPATH : No formula expected on structure Description: XPATH : Group-by required for for-each-group Description: XPATH : Group-by must be the first child of for-each-group Description: XPATH : Only 1 Group-by allowed for a for-each-group Description:

80 70 Chapter 3 XPath XPATH : Unexpected output, '%1' Description: XPATH : Unexpected output, '%1'; exceeds maximum occurrence Description: XPATH : Unexpected text output Description: XPATH : Unexpected output, '%1'; got namepsace '%2', expected namespace '%3' Description:

81 XPath Error Codes 71 XPATH : Value required for '%1' Description: XPATH : Element '%1' required Description: XPATH : Not all required components of '%1' are complete Description: XPATH : The output generated inside '%1' is incomplete Description: XPATH : The output generated inside '%1' is not valid Description:

82 72 Chapter 3 XPath XPATH : Missing preceding output terms Description: XPATH : Components inside of '%1' contain errors Description: XPATH : Change namespace to %1 Description: XPATH : Rename to %1 Description:

83 XPath Error Codes 73 XPATH : Move to: %1 Description: XPATH : Move to before: %1 Description: XPATH : Copy-of incompatible; names match, but content differs Description: XPATH : Formula has errors Description: XPATH : Marker must be filled in Description:

84 74 Chapter 3 XPath XPATH : A 'when' statement cannot appear after an 'otherwise' Description: XPATH : Only 1 'otherwise' statement is allowed in a 'choose' Description: XPATH : Only 'when' and 'otherwise' can appear under 'choose' Description: XPATH : All 'sort' statements must appear before anything else Description:

85 XPath Error Codes 75 XPATH : Can generate more than the expected output of '%1' Description: XPATH : The 'sort' statement must appear directly inside a 'for-each' or 'apply-templates' statement Description: XPATH : Expected %1 Description: XPATH : Unexpected Description: XPATH : Unexpected end of xpath

86 76 Chapter 3 XPath Description: XPATH : a variable name Description: XPATH : Coercion error: '%1' (check coercion list) Description: XPATH : Possibly invalid conversion from %1 to %2 Role: warningrole Description: XPATH : Always true Role: warningrole Description:

87 XPath Error Codes 77 XPATH : Converting a constant string to a boolean, always true Role: warningrole Description: XPATH : Will be converted as if by boolean(), recommend comparing to string Role: warningrole Description: XPATH : Will be converted as if by boolean(), recommend converting to a number Role: warningrole Description: XPATH : Always false Role: warningrole Description: XPATH : position() is relative to inside the filter; equivalent to 'true()' in this usage. Role: warningrole Description:

88 78 Chapter 3 XPath XPATH : Statement contains no children; has no effect Role: warningrole Description: XPATH : Output is required, so the surrounding 'if' is not required Role: warningrole Description: XPATH : Input is not optional, so the surrounding 'if' is not required Role: warningrole Description: XPATH : Input is not a node set, so the surrounding 'if' is not recommended Role: warningrole Description:

89 XPath Error Codes 79 XPATH : Simplify to an xsi:nil attribute constant Role: warningrole Description: XPATH : The input and this element are both nillable, set to copy-nil Role: warningrole Description: XPATH : This element is not nillable Role: warningrole Description: XPATH : This input element is not nillable Role: warningrole Description: XPATH : The referenced schema component has an error: %1 Role: warningrole Description:

90 80 Chapter 3 XPath XPATH : The term %1 is required but not generated in all cases of the choose Role: warningrole Description: XPATH : Converted by %1 Role: inforole Description: XPATH : Optimize by computing '%1' out of the predicate Role: inforole Description: XPATH : For element '%1', source schema has namespace '%2', the target has namespace '%3' Role: inforole Description:

91 XPath Error Codes 81 XPATH : Source schema has name '%1', target has name '%2' Role: inforole Description: XPATH : Source schema has '%1', target has '%2' Role: inforole Description: XPATH : The statement 'stylesheet' cannot appear here Description: XPATH : Expected output '%1' before this Description: XPATH : Expected output '%1' at end of this Description:

92 82 Chapter 3 XPath

93 83 Chapter 4 ActiveEnterprise Adapter Palette This chapter describes error codes that can be returned by activities in the ActiveEnterprise Adapter palette. Topics ActiveEnterprise Adapter Error Codes, page 84

94 84 Chapter 4 ActiveEnterprise Adapter Palette ActiveEnterprise Adapter Error Codes BW-AE : Cannot create Transport Description: Cannot create Transport Please Contact TIBCO Support BW-AE : Error in sending message Description: Error in sending message Please Contact TIBCO Support BW-AE : Error serializing the message Description: Error serializing the message Please Contact TIBCO Support BW-AE : Error in sending request Description: Error in sending request Please Contact TIBCO Support

95 ActiveEnterprise Adapter Error Codes 85 BW-AE : Error in processing event: %1 Description: Error in processing event Please Contact TIBCO Support BW-AE : Cannot create TibrvQueue: %1 Description: Cannot create TibrvQueue Please Contact TIBCO Support BW-AE : Cannot create rveventcontext: %1 Description: Cannot create rveventcontext Please Contact TIBCO Support BW-AE : Cannot create reply listener for subject: %1 Description: Cannot create reply listener, for subject: %1 Please Contact TIBCO Support

96 86 Chapter 4 ActiveEnterprise Adapter Palette BW-AE : Cannot activate TIBRV listener for subject: %1 Description: Cannot activate TIBRV listener for subject: %1 Please Contact TIBCO Support BW-AE : Error in sending reply Description: Error in sending reply Please Contact TIBCO Support BW-AE : Error in confirming the message Description: Error in sending reply Please Contact TIBCO Support BW-AE : RPC Server returned error message. Description: RPC Server returned error message. Please check the RPC exception data for more information

97 ActiveEnterprise Adapter Error Codes 87 BW-AE : Error while serializing the message. Description: Error while serializing the message Please Contact TIBCO Support BW-AE : Error while deserializing the message. Description: Error while deserializing the message Please Contact TIBCO Support BW-AE : Timeout waiting for reply. Description: Timeout waiting for reply Please Contact TIBCO Support BW-AE : Subject used in the Transport of the Activity is different from the Adapter Service. Description: Subject used in the Transport of the Activity is different from the Adapter Service Please Contact TIBCO Support

98 88 Chapter 4 ActiveEnterprise Adapter Palette BW-AE : RV Service used in the Transport of the Activity is different from the Adapter Service. Description: RV Service used in the Transport of the Activity is different from the Adapter Service Please Contact TIBCO Support BW-AE : RV Network used in the Transport of the Activity is different from the Adapter Service. Description: RV Network used in the Transport of the Activity is different from the Adapter Service Please Contact TIBCO Support BW-AE : RV Daemon used in the Transport of the Activity is different from the Adapter Service. Description: RV Daemon used in the Transport of the Activity is different from the Adapter Service Please Contact TIBCO Support

99 ActiveEnterprise Adapter Error Codes 89 BW-AE : JMS Topic used in the Transport of the Activity is different from the Adapter Service. Description: JMS Topic used in the Transport of the Activity is different from the Adapter Service Please Contact TIBCO Support BW-AE : JMS Queue used in the Transport of the Activity is different from the Adapter Service. Description: JMS Queue used in the Transport of the Activity is different from the Adapter Service Please Contact TIBCO Support BW-AE : The Adapter Service being connected to may use a SSL option different from the BW Activity. Description: The Adapter Service being connected to may use a SSL option different from the BW Activity. Please Contact TIBCO Support

100 90 Chapter 4 ActiveEnterprise Adapter Palette BW-AE : The Adapter Service being connected to may use a different JMS URL from the BW Activity. Description: The Adapter Service being connected to may use a different JMS URL from the BW Activity. Please Contact TIBCO Support BW-AE : RV Subject is a required field. Description: RV Subject is a required field. Please Contact TIBCO Support BW-AE : JMS Topic is a required field. Description: JMS Topic is a required field. Please Contact TIBCO Support BW-AE : JMS Queue is a required field. Description: JMS Queue is a required field. Please Contact TIBCO Support

101 ActiveEnterprise Adapter Error Codes 91 BW-AE : JMS Url is a required field. Description: JMS Url is a required field. Please Contact TIBCO Support BW-AE : AE metadata loading error: class %1 not found. Description: AE metadata loading error: class %1 not found. Please Contact TIBCO Support BW-AE : Failed to load request metadata for operation %1 in class %2. Description: Failed to load request metadata for operation %1 in class %2. Please Contact TIBCO Support BW-AE : Can't load the ProcessStarter %1. Description: Can't load the ProcessStarter %1. Please Contact TIBCO Support

102 92 Chapter 4 ActiveEnterprise Adapter Palette BW-AE : AE plugin configuration error: %1 Description: AE plugin configuration error. Details provided Please Contact TIBCO Support

103 93 Chapter 5 File Palette This chapter describes error codes that can be returned by activities in the File palette. Topics File Error Codes, page 94

104 94 Chapter 5 File Palette File Error Codes BW-FILE : File name [%1] is not valid Description: The file name is not valid Correct the filename or the mapping used to create the file name BW-FILE : File [%1] was not found Description: The file was not found Correct the filename or the mapping used to create the file name BW-FILE : File [%1] already exists Description: The file already exists Correct the filename or the mapping used to create the file name BW-FILE : An IO exception occurred while trying to write to the file [%1] Description: An IO exception occurred while trying to write to the file System error

105 File Error Codes 95 BW-FILE : File [%1] cannot be created Description: File cannot be created System error BW-FILE : Cannot read the binary content for the file [%1] Description: Unable to get the file content in binary form System error BW-FILE : Cannot read the string content for the file [%1] Description: Unable to get the file content in string form System error BW-FILE : The encoding [%1] is not valid Description: The encoding is not valid Check the encoding to make sure it is supported

106 96 Chapter 5 File Palette BW-FILE : The content provided is not base 64 binary Description: The file was not found Check the input data BW-FILE : Cannot rename the file [%1] to [%2] Description: Cannot rename the file System error BW-FILE : Cannot rename the file [%1] to [%2]. The destination file exists and its type is different then the type of the source file Description: Cannot rename the file]. The destination file exists and its type is different then the type of the source file Check input data BW-FILE : This activity cannot be used to move a directory Description: This activity cannot be used to move a directory See the documentation of the File Rename Activity

107 File Error Codes 97 BW-FILE : Cannot remove the file [%1] Description: Cannot remove the file System error BW-FILE : An IO exception occurred while trying to create the file [%1] Description: An IO exception occurred while trying to create the file System error BW-FILE : You cannot overwrite the following file [%1] to file [%2] if the overwrite flag is not selected. Description: May need to set Overwrite property on activity Configuration BW-FILE : You cannot copy a directory [%1] to an existing file [%2] Description: You cannot copy a directory to an existing file Change from file path

108 98 Chapter 5 File Palette BW-FILE : You cannot copy multiple files [%1] to an existing file [%2] Description: You cannot copy mutiple files to an existing file Change from file path BW-FILE : Cannot create missing path [%1] Description: Cannot create missing path May need to set Create Missing Dirs property on activity Configuration BW-FILE : Cannot copy file [%1] to file [%2] Description: Cannot copy file System Error

109 99 Chapter 6 FTP Palette This chapter describes error codes that can be returned by activities in the FTP palette. Topics FTP Error Codes, page 100

110 100 Chapter 6 FTP Palette FTP Error Codes BW-FTP : FTP connection is required. Description: FTP connection is required. Please Contact TIBCO Support BW-FTP : Cannot perform FTP Operation: %1. Error Info: %2 Description: Cannot perform FTP Operation: %1. Error Info: %2 Please Contact TIBCO Support BW-FTP : Cannot establish FTP connection when performing FTP function: %1. Error Info: %2 Description: Cannot establish FTP connection when performing FTP function: %1. Error Info: %2 Please Contact TIBCO Support BW-FTP : File %1 already exists. Description: File %1 already exists. Please Contact TIBCO Support

111 FTP Error Codes 101 BW-FTP : Error in PUT or MPUT command. See Error Tab for details. Description: Error in PUT or MPUT command. See Error Tab for details. Please Contact TIBCO Support BW-FTP : Error in GET or MGET command. See Error Tab for details. Description: Error in GET or MGET command. See Error Tab for details. Please Contact TIBCO Support BW-FTP : FTP Connection Succeeded. Target System: %1. Role: inforole Description: FTP Connection Succeeded. Target System: %1. Please Contact TIBCO Support BW-FTP : Client is not initialized: %1. Description: Client is not initialized: %1. Please Contact TIBCO Support

112 102 Chapter 6 FTP Palette BW-FTP : Connection timeout. Description: Connection timeout. Please Contact TIBCO Support BW-FTP : Local file specified cannot be found. Description: Local file specified cannot be found. Please Contact TIBCO Support BW-FTP : Global variable %1 not defined. Description: Global variable %1 not defined. Please Contact TIBCO Support BW-FTP : Unexpected reply code. Returned Code: %1 Expected Code: %2. Description: Unexpected reply code. Returned Code: %1. Expected Code: %2. Please Contact TIBCO Support

113 FTP Error Codes 103 BW-FTP : Invalid user name or password Description: Invalid user name or password Please Contact TIBCO Support BW-FTP : Error in executing remote command: %1 Description: Error in executing remote command: %1 Please Contact TIBCO Support BW-FTP : Connection reference is missing. Description: Connection reference is missing. Please Contact TIBCO Support BW-FTP : Cannot access firewall. Description: Cannot access firewall. Please Contact TIBCO Support

114 104 Chapter 6 FTP Palette BW-FTP : Field %1 is required. Description: Field %1 is required. Please Contact TIBCO Support BW-FTP : FTP Connection Test Failed. Validate Host Name: %1. Description: FTP Connection Test Failed. Validate Host Name: %1. Please Contact TIBCO Support BW-FTP : FTP Connection Test Failed. Error: %1. Description: FTP Connection Test Failed. Error: %1. Please Contact TIBCO Support BW-FTP : File %1 does not exist. Description: File %1 does not exist. Please Contact TIBCO Support

115 FTP Error Codes 105 BW-FTP : Trusted Certificate location not specified in SSL Configuration Description: Trusted Certificate location not specified in SSL Configuration Please Contact TIBCO Support BW-FTP : Error compiling trusted certificate. Reason : %1 Description: Error compiling trusted certificate. Reason : %1 Please Contact TIBCO Support BW-FTP : Error compiling client identity. Reason : %1 Description: Error compiling client identity. Reason : %1 Please Contact TIBCO Support BW-FTP : Error creating SSL client. Reason : %1 Description: Error creating SSL client. Reason : %1 Please Contact TIBCO Support

116 106 Chapter 6 FTP Palette BW-FTP : Error creating secure socket. Reason : %1 Description: Error creating secure socket. Reason : %1 Please Contact TIBCO Support BW-FTP : Error establishing active data socket. Reason : %1 Description: Error establishing active data socket. Reason : %1 Please Contact TIBCO Support BW-FTP : Error changing remote working directory. Reason : input is null Description: Error changing remote working directory. Reason : input is null Please Contact TIBCO Support BW-FTP : Error doing mget. Reason: mget is not supported for FTP via Proxy Description: Error doing mget. Reason: mget is not supported for FTP via Proxy Please Contact TIBCO Support

117 107 Chapter 7 General Activities Palette This chapter describes error codes that can be returned by activities in the General Activities palette. Topics General Activities Error Codes, page 108

118 108 Chapter 7 General Activities Palette General Activities Error Codes BW-GENERAL : Notify Configuration not specified Description: Notify Configuration not specified Please specify shared configuration BW-GENERAL : Unable to construct notification data for wait/receive activity Description: Unexpected internal error occurs. Unable to construct notification data for wait/receive activity Please contact TIBCO support BW-GENERAL : Unable to lock schema for notify input Description: Unable to lock schema for otify input Please look at exception for more details BW-GENERAL : Internal schema error occurs Description: Internal schema error occurs Please look at exception for more details

119 General Activities Error Codes 109 BW-GENERAL : Unable to resolve shared configuration reference for [%1] Description: Unable to resolve shared configuration reference for [%1] Please look at exception for more details BW-GENERAL : Cannot cancel wait on group [%1] key [%2] Role: warnrole Description: Cannot cancel wait on group [%1] key [%2] Please look at exception for more details BW-GENERAL : Receive error notification in [%1] Role: warnrole Description: Receive error notification in [%1] Please look at exception for more details BW-GENERAL : Error occurs after getting notification data in [%1] Role: warnrole Description: Error occurs after getting notification data in [%1] Please look at exception for more details

120 110 Chapter 7 General Activities Palette BW-GENERAL : Wait for notification failed for [%1], set inactive Role: warnrole Description: Wait for notification failed for [%1], set inactive Please look at exception for more details BW-GENERAL : Wait thread internal error for [%1], set inactive Role: warnrole Description: Wait thread internal error for [%1], set inactive Please look at exception for more details BW-JNDI : Configuration Test Failed. %1 Description: Unable to establish connection to the server. Please correct the error stated in the exception message and retry. BW-JNDI : Configuration Test Failed. Exception [%1] occurred. Description: Unable to establish connection to the server. Exception occurred Please correct the error stated in the exception message and retry.

121 General Activities Error Codes 111 BW-JNDI : The JNDI Configuration reference [%1] not found Description: Unable to obtain the specified JNDI Configuration shared resource reference Please correct the error and retry. BW-JNDI : The JNDI Configuration reference [%1] not found in repository Description: The repository does not contain the specified JNDI Configuration shared resource reference Please correct the error and retry. BW-JNDI : The JNDI Configuration reference [%1] contains incorrect field values. Description: The JNDI Configuration shared resource referenced contains invalid field values. Please correct the error and retry. BW-JNDI : Exception occurred while trying to obtain the JNDI Configuration reference [%1]: %2 Description: Unable to obtain the JNDI Configuration shared resource reference Please correct the error and retry.

122 112 Chapter 7 General Activities Palette BW-JTAUT : %1 Role: debugrole Description: Debug Trace Message None BW-CMD : Error executing external command %1: %2. Description: Error executing external command %1: %2. Check command value in configuration and input. BW-CMD : Error accessing file or directory %1: %2. Check file or directory name and permissions. Description: Error accessing file or directory %1: %2. Check file or directory name and permissions. Ensure that output file has write permissions for user running engine and that sufficient disk space is available for writing output file. Ensure that working directory exists and is accessible for user running engine. BW-CMD : No command specified. Description: No command specified. Provide a command in configuration or input.

123 General Activities Error Codes 113 BW-TIMER : Invalid start time [%1], correct format is [%2] Description: The format of the start time must conform to the standard format. Update the global variable to use the correct format.

124 114 Chapter 7 General Activities Palette

125 115 Chapter 8 HTTP Palette This chapter describes error codes that can be returned by activities in the HTTP palette. Topics HTTP Error Codes, page 116

126 116 Chapter 8 HTTP Palette HTTP Error Codes BW-HTTP : The Http Server replied with a 4XX status code Description: The request contains bad syntax or cannot be fulfilled Correct the configuration (input data) of the Http Request activity BW-HTTP : The Http Server replied with a 5XX status code Description: The server failed to fulfill an apparently valid request See the documentation BW-HTTP : An exception was thrown while trying to initialize the Http client Description: An exception was thrown while trying to initialize the Http client System exception BW-HTTP : An exception occurred while trying to initialize the Http server Description: An exception occurred while trying to initialize the Http server System exception

127 HTTP Error Codes 117 BW-HTTP : There are more than one Http event sources registered on [ %1 ] Description: There are more than one Http event sources registered on a specific port Make sure there is no more than one Http event source (signal-in activity) that use a specific Http Connection Shared Resource. BW-HTTP : The trusted CA store was not specified Description: The trusted CA store was not specified Make sure the trusted CA store is specified BW-HTTP : An exception occurred while trying to build the input class. Description: A schema specific exception occurred while trying to build the input class. System error BW-HTTP : An exception occurred while trying to build the output class. Description: A schema specific exception occurred while trying to build the output class. System error

128 118 Chapter 8 HTTP Palette BW-HTTP : A repository exception was thrown while trying to load the identity. Description: A repository exception was thrown while trying to load the identity. Make sure the file that contains the private key can be read. BW-HTTP : A security exception was thrown while trying to load the identity. Description: A security exception was thrown while trying to load the identity. Make sure the format of the file that contains the private key is supported. BW-HTTP : An IO exception whas thrown while trying to load the identity. Description: An IO exception whas thrown while trying to load the identity. Make sure the file that contains the private key exists and is readable. BW-HTTP : An IO exception whas thrown while trying to load the trusted CA store. Description: An IO exception whas thrown while trying to load the trusted CA store. Make sure the certificates that are stored in the trusted CA store are valid. See the documentation.

129 HTTP Error Codes 119 BW-HTTP : A security exception whas thrown while trying to load the trusted CA store. Description: A security exception whas thrown while trying to load the trusted CA store. Make sure the certificates that are stored in the trusted CA store are valid. See the documentation. BW-HTTP : A CertificateException whas thrown while trying to load a particular certificate from the trusted CA store. Description: A CertificateException whas thrown while trying to load a particular certificate from the trusted CA store. Make sure the certificates that are stored in the trusted CA store are valid. See the documentation. BW-HTTP : The Identity [ %1 ] is not valid. Description: The Identity [ %1 ] is not valid. See the documentation BW-HTTP : The Identity is not specified Description: The Identity is not specified Make sure the Identity name is specified

130 120 Chapter 8 HTTP Palette BW-HTTP : A security exception was thrown while trying to initialize the HTTPS server Description: A security exception was thrown while trying to initialize the HTTPS server System error BW-HTTP : A lifecycle exception was thrown while trying to initialize the Tomcat server Description: A lifecycle exception was thrown while trying to initialize the Tomcat server System error BW-HTTP : An IO exception was thrown while trying to create the web server file structure Description: An IO exception was thrown while trying to create the web server file structure System error BW-HTTP : An exception was thrown while trying to load the proxy's identity Description: An exception was thrown while trying to load the proxy's identity System error.

131 HTTP Error Codes 121 BW-HTTP : An exception was thrown while trying to load the proxy Description: An exception was thrown while trying to load the proxy System error. BW-HTTP : An exception was thrown while trying to load the identity used for basic Http authentication Description: An exception was thrown while trying to load the identity used for basic Http authentication System error. BW-HTTP : An exception occurred while trying to initialize the Http server: %1 Description: An exception occurred while trying to initialize the Http server System exception BW-HTTP : The Identity on the Proxy Connection is not valid Description: The Identity on the Proxy Connection is not valid. Please use a UsernamePassword Identity Correct the Identity

132 122 Chapter 8 HTTP Palette BW-HTTP : The Identity for the basic authentication was not specified Description: The Identity for the basic authentication was not specified Make sure the Identity name is specified BW-HTTP : The Identity [ %1 ] cannot be referenced in this context Description: The Identity [ %1 ] cannot be referenced in this context See the documentation BW-HTTP : The Parameter Name [ %1 ] is not valid Description: The Parameter Name [ %1 ] is not valid Fix the name of the parameter BW-HTTP : The Parameter Name [ %1 ] is already specified Description: The Parameter Name [ %1 ] is already specified Remove one of the parameters

133 HTTP Error Codes 123 BW-HTTP : The HTTP Connection Resource is not specified Description: The HTTP Connection Resource is not specified Specify an HTTP Connection Resource BW-HTTP : A POST Method cannot send parameters if the message body is specified Description: A POST Method cannot send parameters if the message body is specified Correct the input data. BW-HTTP : A GET Method doesn't have a message body Description: A GET Method doesn't have a message body Correct the input data. Make sure that the message body is not specified for a GET request BW-HTTP : Invalid endpoint URL. The host name is not specified Description: Invalid endpoint URL. The host name is not specified Correct either the configuration or the input data. Make sure that the host name is specified.

134 124 Chapter 8 HTTP Palette BW-HTTP : Invalid endpoint URL Description: Invalid endpoint URL Correct either the configuration or the input data. BW-HTTP : Invalid input data. The encoding is not supported Description: Invalid input data. The encoding is not supported Correct the input data. Make sure the encoding is supported. See the documentation. BW-HTTP : The http method [ %1 ] is not valid Description: The specified HTTP method is not valid Correct the input data. Make sure that the HTTP method is valid BW-HTTP : The status line [ %1 ] is not valid Description: The status line is not valid. The right format is X Y Z, where X - the HTTP version, Y - the status code, Z - the reason phrase See the documentation

135 HTTP Error Codes 125 BW-HTTP : An exception was thrown while trying to url-encode the data Description: An exception was thrown while trying to url-encode the data. See the documentation BW-HTTP : Attachment not supported for HTTP method %1. Only HTTP 'POST' can send attachments Description: Attachment not supported for HTTP method %1. Only HTTP 'POST' can send attachments See the documentation BW-HTTP : Error serializing attachment data, Cause: %1 Description: Error serializing attachment data, Cause: %1 See the documentation BW-HTTP : The input data is not valid Description: The input data is not valid See the documentation

136 126 Chapter 8 HTTP Palette BW-HTTP : An IOException was thrown while trying to execute the Http method Description: An IOException was thrown while trying to execute the Http method System exception BW-HTTP : An exception was thrown while trying to execute the Http method. The Reason-code is [ %1 ] Description: An exception was thrown while trying to execute the Http method. System exception BW-HTTP : An IOException was thrown while trying to read the response Description: An IOException was thrown while trying to read the response System exception BW-HTTP : An IOException was thrown while trying to send the response Description: An IOException was thrown while trying to send the response System exception

137 HTTP Error Codes 127 BW-HTTP : An Exception was thrown while trying to send the response Description: An Exception was thrown while trying to send the response System exception BW-HTTP : An exception was thrown while trying to send the Http request Description: An exception was thrown while trying to send the Http request System exception BW-HTTP : The incoming Http message cannot be deserialized Description: The incoming Http message cannot be deserialized There is probabily an error on the Http client that invokes this service BW-HTTP : Using the following HTTP minprocessors/maxprocessors [host=%1 port=%2]: %3/%4 Role: inforole Description: Using the following HTTP minprocessors/maxprocessors [host=%1 port=%2]: %3/%4

138 128 Chapter 8 HTTP Palette BW-HTTP : For better MIME Multipart support, consider Upgrading Configuration Role: warnrole Description: For better MIME Multipart support, consider Upgrading Configuration

139 129 Chapter 9 Java Palette This chapter describes error codes that can be returned by activities in the Java palette. Topics Java Error Codes, page 130

140 130 Chapter 9 Java Palette Java Error Codes BW-JAVA : The activity was not compiled Description: The activity was not compiled Compile the activity in Designer. BW-JAVA : While executing [%1] encountered [%2] : [%3] Description: Exception encountered while invoking a method on the activity Inspect the Java source for this activity for a possible cause. BW-JAVA : The Java compiler is not in the classpath. Add tools.jar to the classpath. Description: The Java compiler is not in the classpath. Add tools.jar to the classpath. Add tools.jar to the classpath. BW-JAVA : The Java compile of [%1] failed with message: [%2] Description: The Java compiler encountered an error in the activity Java code. Examine the error and fix the issue in the Java code.

141 Java Error Codes 131 BW-JAVA : The Java code is missing a required comment: [%1] Description: The activity uses embedded comments to auto generate code. One of them is missing. Update the code to remove any unbalanced comment delimiters and recompile. BW-JAVA : The [javacode] property is missing from the.tra file Description: The activity could not determine a suitable temporary directory. add java.property.javacode=[directory] in the designer.tra and bwengine.tra files. BW-JAVA : Cannot delete the [%1] Java source file. Description: Source files are written to the local file system for the compiler to access. The given file already exists and is write protected. Remove the Java source file from the local file system so that the activity may write a new copy. BW-JAVA : Cannot write the [%1] Java source file: [%2] Description: Source files are written to the local file system for the compiler to access. There was an error writing the given file to the file system. Examine the temporary directory for sufficient space to write files.

142 132 Chapter 9 Java Palette BW-JAVA : Activity input schema creation error. Exception [%1] occurred while trying to create input schema. %2 Description: The Java plugin activity is not able create schema for the activity's input tab. Exception occurred Please correct the error and retry. BW-JAVA : Activity output schema creation error. Exception [%1] occurred while trying to create output schema. %2 Description: The Java plugin activity is not able create schema for the activity's output tab. Exception occurred Please correct the error and retry. BW-JAVA : Activity input data conversion error. Exception [%1] occurred while trying to render the activity input data. %2 Description: This activity is not able to convert the input data. Please Contact TIBCO Support BW-JAVA : Activity output data conversion error. Exception [%1] occurred while trying to create the activity output data. %2 Description: This activity is not able to create the output data. Please Contact TIBCO Support

143 Java Error Codes 133 BW-JAVA : Activity initialization error: %1 Description: Error occurred while initializing the activity. Please Contact TIBCO Support BW-JAVA : Unable to obtain information for the Java class [%1]. Exception [%2] occurred. %3 Description: Exception occurred while trying to obtain information for the declared Java class. Please correct the error stated in the exception message and retry. BW-JAVA : The Java class [%1] is not found in the classpath. ClassNotFoundException occurred. %2 Description: ClassNotFoundException occurred while trying to access the specified Java class. Please verify that the specified class file is contained in the classpath. BW-JAVA : The Java class [%1] cannot be instantiated. Exception [%2] occurred. %3 Description: Unable to create an instance of the specified Java class. Please correct the error stated in the exception message and retry.

144 134 Chapter 9 Java Palette BW-JAVA : Input data error. The activity received an incorrect value for the method parameters. IllegalArgumentException occurred while trying to construct an instance of the Java class [%1]: %2 Description: The activity received a incorrect value for the method parameter element that is in the activity input tab. IllegalArgumentException occurred while trying to construct the specified Java class. Verify that the correct values are provided for the method parameter elements that are in the activity input tab. BW-JAVA : Unable to construct an instance of the Java class [%1]. Exception [%2] occurred. %3 Description: Unable to create an instance of the Java class. Exception occurred while trying to create an instance of the Java class. Please correct the error stated in the exception message and retry. BW-JAVA : The constructor for the Java class [%1] raised exception [%2]. %3 Description: Exception occurred on invocation of the Java class constructor. The exception was raised by the constructor of the declared Java class. Please refer to the Java class implementation for details.

145 Java Error Codes 135 BW-JAVA : Configuration error. The Java class [%1] is an abstract class. It is not permitted to create an instance of an abstract Java class. Description: The selected class is an abstract Java class. Make sure that the selected class is not an abstract Java class BW-JAVA : Configuration error. The Java class [%1] is an interface. It is not permitted to create an instance of a Java interface. Description: The selected class is a Java interface. Make sure that the selected class is not a Java interface BW-JAVA : Configuration error. The Java class [%1] is not serializable. If the selected Java class is cached by the activity then the class must be a subtype of the interface 'java.io.serializable'. Description: The declared Java class is not serializable. If the user has selected the option to cache the declared Java class then the class must be a subtype of the interface 'java.io.serializable'. Make sure that the selected class is a subtype of the interface 'java.io.serializable'

146 136 Chapter 9 Java Palette BW-JAVA : Configuration error. The method [%1] returns a Java class [%2] that is not serializable. The Java class returned by the selected method must be a subtype of the interface 'java.io.serializable'. Description: Invalid method return type. If the selected method must returns a Java class then the class must be a subtype of the interface 'java.io.serializable'. Make sure that the selected method returns a serializable Java class BW-JAVA : Unable to obtain information for the method [%1] from the class [%2]. NoSuchMethodException occurred. %3 Description: The method name is not contained in the declared Java class. It is possible that the declared Java class has been modified since the last configuration of this activity. Please reconfigure this activity or verify that the declared Java class has not changed since the last configuration. BW-JAVA : Unable to obtain information for the cleanup method [%1] from the class [%2]. NoSuchMethodException occurred. %3 Description: The cleanup method name is not contained in the declared Java class. It is possible that declared Java class has been modified since the last configuration of this activity. Please reconfigure this activity or verify that the declared Java class has not changed since the last configuration.

147 Java Error Codes 137 BW-JAVA : Unable to obtain information for method [%1] from the class [%2]. SecurityException occurred. %3 Description: SecurityException occurred while trying to get method information from the declared Java class. Please correct the error and retry. BW-JAVA : Unable to obtain information for method [%1] from the class [%2]. ClassNotFoundException occurred. %3 Description: ClassNotFoundException occurred while trying to get method information from the declared Java class. Please verify that the specified class file is contained in the classpath. BW-JAVA : Unable to obtain information for method [%1] from the class [%2]. Exception occurred. %3 Description: Exception occurred while trying to get method information from the declared Java class. Please correct the error and retry.

148 138 Chapter 9 Java Palette BW-JAVA : Input data error. The activity received an incorrect value for the method parameters. IllegalArgumentException occurred while trying to invoke the method [%1]: %2 Description: The activity received a incorrect value for the method parameter element that is in the activity input tab. IllegalArgumentException occurred while trying to invoke the Java method. Verify that the correct values are provided for the method parameter elements that are in the activity input tab. BW-JAVA : Input data error. The activity received an incorrect Java object for the declared Java class [%1]. The activity expected an instance of the Java class [%2], but received an instance of the Java class [%3]: %4 Description: The activity received a incorrect value for the declared class element that is in the activity input tab. Possible causes for this error are: (1). Incorrect object reference was specified for the declared Java class. Verify that the correct Java object reference is provided for the declared Java class element shown in the input tab of this activity. (2). The classpath refers to a incorrect declared class or the Java jar file. Verify that the classpath refers to the correct declared class.

149 Java Error Codes 139 BW-JAVA : Input data error. The activity received an incorrect Java object for the declared Java class [%1]. The Java object received is not compatible with the Java object expected by this activity. The activity expects an instance of the Java class [%2]: %3 Description: The activity received a incorrect value for the declared class element that is in the activity input tab. Possible causes for this error are: (1). Incorrect object reference was specified for the declared Java class. Verify that the correct Java object reference is provided for the declared Java class element shown in the input tab of this activity. (2). The classpath refers to a incorrect declared class or the Java jar file. Verify that the classpath refers to the correct declared class. BW-JAVA : Input data error. The activity received 'null' value for the for the declared Java class. The activity expected an instance of the class [%1], but received a 'null'. Description: The activity received a null value for the declared class element that is in the activity input tab Possible causes for this error are: (1). Incorrect object reference was specified for the declared Java class. Verify that the correct Java object reference is provided for the declared Java class element shown in the input tab of this activity. (2). The preceding activity that provides the input value for this activity produced a null for its output. BW-JAVA : Unable to invoke the method [%1]. Exception [%2] occurred. %3 Description: Unable to invoke the user specified method of the Java class. Exception occurred while trying to invoke the method. Please correct the error stated in the exception message and retry.

150 140 Chapter 9 Java Palette BW-JAVA : Unable to invoke the cleanup method [%1]. Exception [%2] occurred. %3 Description: Unable to invoke the cleanup method for the Java class. Exception occurred while trying to invoke the method. Please correct the error stated in the exception message and retry. BW-JAVA : The method [%1] raised exception [%2]. %3 Description: Exception occurred on invocation of the specified method. The exception was raised by the method of the specified Java class. Please refer to the declared class implementation for details. BW-JAVA : The cleanup method [%1] raised exception [%2]. %3 Description: Exception occurred on invocation of the cleanup method. The exception was raised by the method of the specified Java class. Please refer to the declared class implementation for details. BW-JAVA : Exception occurred while trying to obtain the JavaSchema [%1]. %2 Description: Unable to get the JavaSchema activity referenced by this activity Please correct the error and retry.

151 Java Error Codes 141 BW-JAVA : The JavaSchema [%1] referenced by this activity is not found in repository. Description: The repository does not contain the JavaSchema activity referenced by this activity. Please correct the error and retry. BW-JAVA : The JavaSchema [%1] referenced by this activity contains invalid field values. Description: The JavaSchema activity referenced by this activity contains invalid field values. Please correct the error and retry. BW-JAVA : Input data error. The activity received 'null' value for the declared Java class. The activity expected instance of class [%1], but received a 'null'. Description: The activity received a null value for the declared Java class element that is in the activity input tab Possible causes for this error are: (1). Incorrect object reference was specified for the declared class. Verify that the correct Java object reference is provided for the declared class element shown in the input tab of this activity. (2). The preceding activity that provides the input value for this activity produced a null for its output.

152 142 Chapter 9 Java Palette BW-JAVA : Input data error. The activity received incorrect Java object for the declared Java class. The activity expected instance of a class [%1], but received instance of a class [%2]. Description: The activity received a incorrect value for the declared Java class element that is in the activity input tab. Possible causes for this error are: (1). Incorrect object reference was specified for the declared class. Verify that the correct Java object reference is provided for the declared class element shown in the input tab of this activity. (2). The classpath refers to a incorrect the declared class or the Java jar file. Verify that the classpath refers to the correct declared Java class. BW-JAVA : Configuration error. The Java class [%1] does not contain a default constructor or a constructor with no arguments. The selected Java class must have a default constructor if the user has selected the option to construct the declared class by the activity. Description: The user has selected the option to construct the declared class by the activity. This option is available in the Select a Java class that contain a default constructor BW-JAVA : Data Conversion error: %1 Description: Unable to convert data from XML to Java or Java to XML. Certain Java data types are not supported by the BusinessWorks conversion mechanism. Please verify that unsupported data types are not utilized or referenced in your Java class.

153 Java Error Codes 143 BW-JAVA : Data Conversion error. Exception occurred while trying to convert Java object to XML data. %1 Description: Unable to convert the Java object to an XML data Certain Java data types are not supported by the Java to XML conversion mechanism. Please verify that unsupported data types are not utilized or referenced in your Java class. BW-JAVA : Data Conversion error. Exception occurred while trying to convert XML data to Java object. %1 Description: Unable to convert the XML data to Java object Certain Java data types are not supported by the XML to Java conversion mechanism. Please verify that unsupported data types are not utilized or referenced in your Java class. BW-JAVA : Unable to generate schema for the Java class [%1]. Exception [%2] occurred. %3 Description: Error occurred while trying to generate schema for the declared Java class. Please correct the error and retry.

154 144 Chapter 9 Java Palette BW-JAVA : Configuration error. The Java class [%1] is not serializable. For XML to Java conversion operations the selected Java class must be a subtype of the interface 'java.io.serializable'. Description: The selected class must be serializable for XML to Java conversion operation Select a class that is serializable BW-JAVA : Configuration error. The Java class [%1] does not contain a default constructor or a constructor with no arguments. For XML to Java conversion operation the selected Java class must have a default constructor. Description: The selected Java class does not contain a constructor with zero arguments Select a Java class that contain a default constructor BW-JAVA : Configuration error. The Java class [%1] contains unsupported data type. %2 Description: The declared Java class contains unsupported data type. Certain Java data types are not supported by the XML to Java or Java to XML conversion mechanism. Please verify that unsupported data types are not utilized or referenced in your Java class.

155 Java Error Codes 145 BW-JAVA : Missing the schema for the Java class [%1]. Description: A schema could not be located the specified Java class. Please attempt to generate the schema. BW-JAVA : A schema for the JavaSchema resource [%1] with the namespace [%2] could not be found. Description: A schema could not be located the specified namespace. Please examine the JavaSchema resource and attempt to regenerate the schema. BW-JAVA : At runtime the TIBCO BusinessWorks activity will not be able to access the method [%1] of the class [%2]. The class or the superclass [%3] that implements the method is not declared as a public class. Description: The declared class modifier must be public. Please verfiy that the Java class that implements the selected method is declared public

156 146 Chapter 9 Java Palette BW-JAVA : At runtime the TIBCO BusinessWorks activity will not be able to access the method [%1] of the class or interface [%2]. The interface [%3] that defines the method is not declared as a public interface. Description: The declared inteface modifier must be public. Please verfiy that the Java Inteface that proclaims the selected method is declared public BW-JAVA : Configuration error. The Java class [%1] does not contain a default constructor or a constructor with no arguments. For XML to Java conversion operations, the [%2] Java class must be comprised only of classes with default constructors. Description: All classes comprising the [%2] Java class must contain a constructor with zero arguments Select a Java class comprised only of classes with default constructors BW-JAVA : Configuration error. The Java class [%1] is is not declared as a public class. It is not permitted to create an instance of an non-public class. Description: The declared class modifier must be public. Make sure that the selected Java class is declared as a public class

157 Java Error Codes 147 BW-JAVA : Exception occurred while trying to obtain the Java Global Instance resource reference [%1]: %2 Description: Unable to get the Java Global Instance resource referenced by this activity Please correct the error and retry. BW-JAVA : The Java Global Instance resource [%1] referenced by this activity is not found in the repository. Description: The repository does not contain the Java Global Instance resource referenced by this activity. Please correct the error and retry. BW-JAVA : The Java Global Instance resource [%1] referenced by this activity contains invalid field values. Description: The Java Global Instance resource referenced by this activity contains invalid field values. Please correct the error and retry.

158 148 Chapter 9 Java Palette BW-JAVA : Configuration error. The Java class name specified in this JavaMethod activity does not match the Java class name specified in the Java Global Instance resource [%1]. Description: The Java Global Instance resource referenced by this JavaMethod activity contains different Java class name then the Java class name specified in the JavaMethod activity Please reconfigure the JavaMethod activity. BW-JAVA : Configuration error. The library specified in this JavaMethod activity does not match the library specified in the Java Global Instance resource [%1]. Description: The Java Global Instance resource referenced by this JavaMethod activity contains different library value then the library value specified in the JavaMethod activity Please reconfigure the JavaMethod activity. BW-JAVA : Runtime error. Illegal onevent(object output)/onerror(throwable error) method call. OnEvent/OnError method must not be called in the init method or during the initialization phase. Description: The onevent(object output) method must never be called in the init() method. The BW engine is in the middle of initializing the Java Event Source activity. Please remove the onevent(object output) method call in the init method.

159 Java Error Codes 149 BW-JAVA : Runtime error. Unable to generate notification events. Description: The error occurs when the JavaProcessStarter is unable to generate notification data due un-availability of a resource. Please check the JavaProcessStarter component for resource errors. BW-JAVA : Runtime error. The output type defined by the getoutputobjecttype() does not match with the type that is passed in to onevent(object object). Description: This exception is thrown if the getoutputobjecttype() method defines the type of the output object that is not the same as object type passed to onevent(object object) method in case of "Convert Output Object To XML" flag being set. Please make sure that object passed to onevent(object output) method is of the same type as that which is returned by getoutputobjecttype().

160 150 Chapter 9 Java Palette

161 151 Chapter 10 JDBC Palette This chapter describes error codes that can be returned by activities in the JDBC palette. Topics JDBC Error Codes, page 152

162 152 Chapter 10 JDBC Palette JDBC Error Codes BW-JDBC : Failed to find or create the JDBC driver : %1 Description: Failed to find or create the JDBC driver Check the CLASSPATH and/or JDBC driver specification BW-JDBC : Missing SQL statement Description: Missing SQL statement Specify the SQL statement BW-JDBC : Some or all of the prepared parameters do not have data types specified Description: Some or all of the prepared parameters do not have data types specified Make sure all the prepared parameters have data types specified BW-JDBC : A JDBC driver that supports metadata access is required Description: A JDBC driver that supports metadata access is required Use a JDBC driver which allows metadata access

163 JDBC Error Codes 153 BW-JDBC : This is not a valid SQL type: %1 Description: Data type specified is not a valid SQL type Specify a valid SQL data type BW-JDBC : You must select a JDBC Connection shared configuration resource Description: You must select a JDBC Connection shared configuration resource Select a JDBC Connection shared configuration resource BW-JDBC : Cannot find shared JDBC configuration: %1 Description: Cannot find shared JDBC configuration Please Contact TIBCO Support BW-JDBC : Cannot find TIbase.jar in the classpath Description: Cannot find TIbase.jar in the classpath Please Contact TIBCO Support

164 154 Chapter 10 JDBC Palette BW-JDBC : Improper SQL statement used. %1 Description: Improper SQL statement used. Details provided Correct and provide proper SQL statement BW-JDBC : Cannot load JDBC Driver: %1 Description: Cannot load specified JDBC Driver Please Contact TIBCO Support BW-JDBC : Duplicate field name found '%1', please modify the query and create unique aliases for duplicate fields Description: Duplicate field name found, please modify the query and create unique aliases for duplicate fields Modify the query and create unique aliases for duplicate fields BW-JDBC : At least one parameter must have a value Description: At least one parameter must have a value Set a value for any parameter

165 JDBC Error Codes 155 BW-JDBC : %1 is not a valid timezone. Please either choose a timezone from the list provided in the Constants tab or refer to the list of valid timezones in the documentation Description: Invalid timezone specified. Please either choose a timezone from the list provided in the Constants tab or refer to the list of valid timezones in the documentation Please either choose a timezone from the list provided in the Constants tab or refer to the list of valid timezones in the documentation BW-JDBC : JDBC plugin initialization failed: %1 Description: JDBC plugin initialization failed. Details provided Please Contact TIBCO Support BW-JDBC : JDBC error reported: (SQLState = %1) - %2 Description: JDBC error reported. Details provided Please Contact TIBCO Support BW-JDBC : JDBC plugin evaluation error: %1 Description: JDBC plugin evaluation error. Details provided Please Contact TIBCO Support

166 156 Chapter 10 JDBC Palette BW-JDBC : No JDBC connection available Description: No JDBC connection available Please Contact TIBCO Support BW-JDBC : Failed to create input and/or output schema(s): %1 Description: Failed to create input and/or output schema(s). Details provided Please Contact TIBCO Support BW-JDBC : %1 input parameters declared in the SQL statement but no input parameters provided Description: Some input parameters declared in the SQL statement but no corresponding input parameters provided Provide input parameters declared in the SQL statement BW-JDBC : Unexpected number of input parameters. %1 declared in the SQL statement but %2 input parameters provided Description: Number of input parameters declared in the SQL statement does not match number of input parameters provided Make sure the number of input parameters declared in the SQL statement match number of input parameters provided

167 JDBC Error Codes 157 BW-JDBC : Unexpected input parameters. No input parameter declared in the SQL statement but %1 input parameters provided Description: There is no input parameter declared in the SQL statement but some input parameters provided Remove all the input parameter provided BW-JDBC : JDBC plugin configuration error: %1 Description: JDBC plugin configuration error. Details provided Please Contact TIBCO Support BW-JDBC : Global variable %1 not defined Description: Specified global variable not defined Define such global variable BW-JDBC : JDBC activity timed out Description: JDBC activity timed out Please Contact TIBCO Support

168 158 Chapter 10 JDBC Palette BW-JDBC : Invalid procedure name specified. %1 Description: Invalid procedure name specified. Details provided Provide a valid stored procedure name BW-JDBC : Unable to obfuscate password. %1 Description: Unable to obfuscate password. Details provided Please Contact TIBCO Support BW-JDBC : Unable to deobfuscate password. %1 Description: Unable to deobfuscate password. Details provided Please Contact TIBCO Support BW-JDBC : %1 is not a valid SQL statement. It does not generate any output schema. Please press 'Fetch' button to (re)fetch output schema or correct the SQL statement Description: Invalid SQL statement specified. It does not generate any output schema. Please press 'Fetch' button to (re)fetch output schema or correct the SQL statement Please press 'Fetch' button to (re)fetch output schema or correct the SQL statement

169 JDBC Error Codes 159 BW-JDBC : Invalid procedure name specified. It can not be null Description: Invalid procedure name specified. It can not be null Provide a valid stored procedure name BW-JDBC : The JNDI Configuration reference [%1] not found Description: The JNDI Configuration reference specified not found Provide a valid JNDI Configuration reference BW-JDBC : The JNDI Configuration reference [%1] not found in repository Description: The JNDI Configuration reference specified not found in repository Provide a valid JNDI Configuration reference BW-JDBC : The JNDI Configuration reference [%1] contains incorrect field values Description: The JNDI Configuration reference specified contains incorrect field values Check and correct specified JNDI Configuration reference

170 160 Chapter 10 JDBC Palette BW-JDBC : Exception occurred while trying to obtain the JNDI Configuration reference [%1]: %2 Description: Exception occurred while trying to obtain the JNDI Configuration reference. Details provided Please Contact TIBCO Support BW-JDBC : Configuration Test Failed. %1 Description: Configuration Test Failed. Details provided Please Contact TIBCO Support BW-JDBC : Configuration Test Failed. Exception [%1] occurred. Description: Configuration Test Failed. Exception occurred. Details provided Please Contact TIBCO Support BW-JDBC : Invalid object looked up, must be either DataSource or XADataSource: %1 Description: Invalid object looked up, must be either DataSource or XADataSource. JNDI lookup name provided Make sure JNDI lookup name bound to either DataSource or XADataSource object

171 JDBC Error Codes 161 BW-JDBC : JNDI look up failed, object is null: %1 Description: JNDI look up failed, object is null. JNDI lookup name provided Make sure JNDI look up returns not null object BW-JDBC : Batch updates failed on update number: %1 Description: Batch updates failed on provided update numbers Resolve these individual updates BW-JDBC : Can't participlate in this transaction group. Correct JDBC Connection type or enable [Override Transaction Behavior] Description: Can't participlate in this transaction group. Correct JDBC Connection type or enable [Override Transaction Behavior] Correct JDBC Connection type or enable [Override Transaction Behavior] BW-JDBC : JDBC Connection Login timed out Description: JDBC Connection Login timed out Increase login timeout

172 162 Chapter 10 JDBC Palette BW-JDBC : Invalid timeout value [%1]. The value must be an integer greater than or equal to '0' Description: Invalid timeout value specified. The value must be an integer greater than or equal to '0' Set timeout to an integer greater than or equal to '0'

173 163 Chapter 11 JMS Palette This chapter describes error codes that can be returned by activities in the JMS palette. Topics JMS Error Codes, page 164

174 164 Chapter 11 JMS Palette JMS Error Codes BW-JMS : Invalid configuration data: JMS connection reference is not specified. Description: JMS connection reference is not specified in configuration data. Specify a valid JMS connection reference in activity configuration. BW-JMS : Invalid configuration data: specfied connection reference not found in repository.[%1] Description: The specified JMS connection reference is not found in repository. [%1-connection reference]. Make sure that the connection reference specified in activity configuration refers to a valid shared JMS connection. BW-JMS : Invalid configuration data: JNDI context URL is not specified.[%1] Description: JNDI context URL is not specified in the shared JMS connection. [%1-shared connection data]. Specify a valid JNDI context URL in the specified shared JMS connection.

175 JMS Error Codes 165 BW-JMS : Invalid configuration data: JNDI initial context factory is not specified.[%1] Description: JNDI initial context factory is not specified in the shared JMS connection. [%1-shared connection data]. Specify a valid JNDI initial context factory in the specified shared JMS connection. BW-JMS : Could not create connection with JMS server.[%1] Description: There was an error when attempting to create a connection with JMS server[%1-connection key data]. Look at the exception for more information. BW-JMS : Could not create a session to receive messages.[%1] Description: There was an error when attempting to create a session to receive messages [%1-configuration data]. Look at the exception for more information. BW-JMS : Could not create a reply session/producer.[%1] Description: There was an error when attempting to create a reply producer [%1-configuration data]. Look at the exception for more information.

176 166 Chapter 11 JMS Palette BW-JMS : JNDI lookup of queue name [%1] failed. Description: JNDI lookup of queue name [%1] failed. Look at the exception for more information. Make sure that the queue has been setup in your JMS provider BW-JMS : Cannot retrieve queue with name [%1]. Description: Cannot retrieve queue with name [%1]. Make sure that the queue has been setup in your JMS provider. BW-JMS : Error creating JNDI initial context [%1]. Description: Cannot create JNDI initial context [%1 - connection key data]. Look at the exception for more information. BW-JMS : JNDI lookup of topic name [%1] failed. Description: JNDI lookup of topic name [%1] failed. Look at the exception for more information. Make sure that the topic has been setup in your JMS provider

177 JMS Error Codes 167 BW-JMS : Cannot retrieve topic with name [%1]. Description: Cannot retrieve topic with name [%1]. Make sure that the topic has been setup in your JMS provider. BW-JMS : Error creating dynamic queue with name [%1]. Description: Error creating dynamic queue with name [%1]. Look at the exception for more information. Also refer to your JMS provider documentation. BW-JMS : Error creating dynamic topic with name [%1]. Description: Error creating dynamic topic with name [%1]. Look at the exception for more information. Also refer to your JMS provider documentation. BW-JMS : Could not create queue message receiver.[%1] Description: There was an error when attempting to create a queue receiver [%1-configuration data]. Look at the exception for more information.

178 168 Chapter 11 JMS Palette BW-JMS : Could not create queue message receiver.[%1] Description: There was an error when attempting to create a queue receiver [%1-Destination]. Look at the exception for more information. BW-JMS : Could not create durable topic message subsriber.[%1] Description: There was an error when attempting to create a durable topic message subsriber.[%1-configuration data]. Look at the exception for more information. BW-JMS : Could not create topic message subsriber.[%1] Description: There was an error when attempting to create a topic message subsriber.[%1-configuration data]. Look at the exception for more information. BW-JMS : Could not create topic message subsriber.[%1] Description: There was an error when attempting to create a topic message subsriber.[%1-destination]. Look at the exception for more information.

179 JMS Error Codes 169 BW-JMS : There was an error when attempting to receive a message. Description: There was an error when attempting to receive a message. Look at the exception for more information. BW-JMS : There was an error in onmessage callback for a received message of type [%1]. Description: There was an error in onmessage callback for a received message of type [%1]. Look at the exception for more information. BW-JMS : Received a message of type [%1] but configured to receive messages of type [%2]. Description: The message type of received message does not match the configured message type. Make sure that the JMS message type is configured correctly in the activity configuration. BW-JMS : There was an error while parsing the reply message. Description: There was an error while parsing the reply message. Look at the exception for more information.

180 170 Chapter 11 JMS Palette BW-JMS : There was an error when attempting to confirm a message. Description: There was an error when attempting to confirm a message. Look at the exception for more information. BW-JMS : JMS message type [%1] is not valid. Description: JMS message type [%1] is not valid. Internal error. BW-JMS : Error creating temporary queue for reply. Description: Error creating temporary queue topic for reply. Look at the exception for more information. BW-JMS : Error creating temporary topic for reply. Description: Error creating temporary topic for reply. Look at the exception for more information.

181 JMS Error Codes 171 BW-JMS : Could not create a reply receiver.[destination=%1] Description: There was an error when attempting to create a reply receiver.[destination=%1]. Look at the exception for more information. BW-JMS : There was an error when attempting to send a request message. Description: There was an error when attempting to send a request message. Look at the exception for more information. BW-JMS : There was an unexpected error. Description: There was an unexpected error. Look at the exception for more information. BW-JMS : There was an unexpected error. Description: There was an unexpected error. Look at the exception for more information.

182 172 Chapter 11 JMS Palette BW-JMS : Unkown state in request/reply processing [%1]. Description: There was an unexpected error [%1-closure]. Look at the exception for more information. BW-JMS : There was an error while cancelling. Description: There was an error while cancelling. Look at the exception for more information. BW-JMS : Received a null reply message. Description: Received a null reply message. Look at the exception for more information. BW-JMS : Could not create a session to send request messages.[connectionkey=%1, Transacted=%2, AckMode=%3] Description: There was an error when attempting to create a session to send request messages [ConnectionKey=%1, Transacted=%2, AckMode=%3]. Look at the exception for more information.

183 JMS Error Codes 173 BW-JMS : Could not create a session to receive reply messages.[connectionkey=%1, Transacted=%2, AckMode=%3] Description: There was an error when attempting to create a session to send reply messages [ConnectionKey=%1, Transacted=%2, AckMode=%3]. Look at the exception for more information. BW-JMS : Could not create a session to send messages.[connectionkey=%1, Transacted=%2, AckMode=%3] Description: There was an error when attempting to create a session to send messages [ConnectionKey=%1, Transacted=%2, AckMode=%3]. Look at the exception for more information. BW-JMS : There was an unexpected error while sending a message. Description: There was an unexpected error while sending a message. Look at the exception for more information. BW-JMS : There was an unexpected error while sending a reply. Description: There was an unexpected error while sending a reply. Look at the exception for more information.

184 174 Chapter 11 JMS Palette BW-JMS : There was an internal error when attempting setready. Description: There was an internal error when attempting setready. Look at the exception for more information. BW-JMS : There was an error while sending a message. Description: There was an error while sending a message. Look at the exception for more information. BW-JMS : There was an error while parsing a message. Description: There was an error while parsing a message. Look at the exception for more information. BW-JMS : There was an error while parsing the JMS schema. Description: There was an error while parsing the JMS schema. This is an internal error.

185 JMS Error Codes 175 BW-JMS : There was an error while parsing the JMS schema. Description: There was an error while parsing the JMS schema. This is an internal error. BW-JMS : There was an error while parsing the JMS schema. Description: There was an error while parsing the JMS schema. This is an internal error. BW-JMS : There was an error while parsing data to build a message: attributes are not allowed. Description: There was an error while parsing data to build a messag: attributes are not allowed. This is an internal error. BW-JMS : There was an error while parsing data to build a message: mixed text not allowed. Description: There was an error while parsing data to build a messag: mixed text not allowed. This is an internal error.

186 176 Chapter 11 JMS Palette BW-JMS : JMS message priority [%1] in input bind is not valid. Description: JMS message priority [%1] in input bind is not valid. A valid JMS message priority must be a number between 0 and 9 (inclusive). BW-JMS : Invalid JMS Application Properties [%1]. Description: JMS application properties are not valid. See [%1-exception] for more details. Verify that JMS application properties are correct. This can be done by using 'validate for deployment' feature of the Designer. BW-JMS : Invalid message body schema specified [%1] [%2]. Description: The schema [%1] to define message body is not valid. See [%2-exception] for more details. Check the message body schema specified. BW-JMS : Invalid JMS message type specified [%1]. Description: The JMS message type [%1] is not valid. Pick a valid JMS message type.

187 JMS Error Codes 177 BW-JMS : An internal error occured while processing configuration data [%1]. Description: An internal error occured while processing configuration data. See [%1-exception] for more details. Check the exception for more details. BW-JMS : Invalid input data. Description: Input data is invalid. See the exception for more details. Check activity input data. BW-JMS : Error creating JMS message. Description: There was an error while creating a JMS message. See the exception for more details. Check activity input data. See the exception for more details. BW-JMS : Invalid configuration data: message body schema is not specified. Description: Invalid configuration data: no schema specified for message body. Specify a schema to represent the message body in the 'Input Editor' or 'Output Editor' tab.

188 178 Chapter 11 JMS Palette BW-JMS : Invalid configuration data: destination %1 name is not specified. Description: Invalid configuration data: destination name is not specified. Specify name of the topic/queue destination in 'Configuration' tab. BW-JMS : Invalid configuration data: reply to is not specified. Description: Invalid configuration data: reply to is not specified. Pick the reply target in 'Configuration' tab. BW-JMS : Cannot create connection factory in a provider-specific way. Description: Cannot create connection factory in a provider-specific way. Use JNDI lookup instead. Please use TIBCO Enterprise for JMS. Otherwise use JNDI to lookup connection factory. BW-JMS : Invalid configuration data: message body schema is not specified in 'Input Editor' tab. Description: Invalid configuration data: no schema specified for the request message body in 'Input Editor' tab. Specify a schema to represent the request message body in the 'Input Editor' tab.

189 JMS Error Codes 179 BW-JMS : Invalid configuration data: message body schema is not specified in 'Output Editor' tab. Description: Invalid configuration data: no schema specified for the reply message body in 'Output Editor' tab. Specify a schema to represent the reply message body in the 'Output Editor' tab. BW-JMS : Invalid message body schema specified in 'Input Editor' tab [%1] [%2]. Description: The schema [%1] to define the request message body in 'Input Editor' tab is not valid. See [%2-exception] for more details. Check the request message body schema specified in 'Input Editor' tab. BW-JMS : Invalid message body schema specified in 'Output Editor' tab [%1] [%2]. Description: The schema [%1] to define the reply message body in 'Output Editor' tab is not valid. See [%2-exception] for more details. Check the reply message body schema specified in 'Output Editor' tab.

190 180 Chapter 11 JMS Palette BW-JMS : Could not decrypt password.[%1]. Description: There was an error while decrypting a password. See [%1-exception] for more details. Make sure that the password stored in the repository is not in clear text. BW-JMS : Can't create XAResource.Check if the ConnectionFactory [%1] is XA enabled. Description: Can't create XAResource.Check if the ConnectionFactory [%1] is XA enabled. Check if the ConnectionFactory [%1] is XA enabled. BW-JMS : JNDI lookup failed for queue with name [%1]. Description: JNDI lookup failed for queue with name [%1]. Look at the exception for more information. Also refer to your JMS provider documentation.

191 181 Chapter 12 Mail Palette This chapter describes error codes that can be returned by activities in the Mail palette. Topics Mail Error Codes, page 182

192 182 Chapter 12 Mail Palette Mail Error Codes BW-MAIL : Invalid input data: mail server host not specified Description: Host name of mail server is not specified. Specify a valid mail server host in configuration. BW-MAIL : Invalid input data: username not specified. Description: Username for mail server account is not specified Specify a valid user name in configuration. BW-MAIL : Invalid input data: password not specified. Description: Password for mail server account is not specified. Specify a valid password in configuration. BW-MAIL : Invalid input data: Null input data. Description: Input data is null. Check activity input data.

193 Mail Error Codes 183 BW-MAIL : Invalid input data: Error parsing input data. Description: Input data is invalid. Check activity input data. BW-MAIL : Invalid input data: Unequal number of attachment names and attachment data. Description: Number of attachment names and attachment data specified in the input are unequal. Check attachment input data. BW-MAIL : Invalid input data: Both the comma and semicolon cannot be used at same time to separate addresses. Description: Both the comma and semicolon cannot be used at same time to separate addresses. Use either comma or semicolon for separating addresses. BW-MAIL : Mail provider for protocol [%1] not found. Make sure that the provider jar is in java classpath. Description: Could not initialize the mail provider for specified protocol: [mail protocol]. Make sure that the mail provider jar file is in java classpath.

194 184 Chapter 12 Mail Palette BW-MAIL : Error connecting to the mail server using connection parameters: [%1]. Description: Could not establish connection to the mail server using sepecifed parameters: [parameters]. Check configuration data. BW-MAIL : The default mail folder was not found on mail server. Description: The default mail folder was not found on mail server. Check mail server setup. BW-MAIL : The INBOX mail folder was not found on mail server. Description: The INBOX mail folder was not found on mail server. Check mail server setup. BW-MAIL : Error getting folder on mail server. Description: Error getting folder on mail server. Check mail server setup.

195 Mail Error Codes 185 BW-MAIL : Error closing mail server connection. Description: There was an error when attempting close connection with mail server. Look at the exception for more information. BW-MAIL : Error while polling mail server: cannot open INBOX folder. Description: There was an error when attempting to open connection with mail server. Look at the exception for more information. BW-MAIL : Error while polling mail server: cannot close INBOX folder. Description: There was an error when attempting to close connection with mail server. Look at the exception for more information. BW-MAIL : Unexpected error while polling mail server. Description: There was an unexpected error while retrieving mails. Look at the exception for more information.

196 186 Chapter 12 Mail Palette BW-MAIL : Error parsing received mail. Description: There was an error while parsing a new mail message received. Look at the exception for more information. BW-MAIL : Error building mail message. Description: There was an error while building a mail message to send. Look at the exception for more information. BW-MAIL : Error sending mail message. Description: Error sending mail message. Cause: %1 Look at the exception for more information. BW-MAIL : Error connecting to the mail server - unknown host; connection parameters: [%1]. Description: Could not establish connection to the mail server - specified host is unknown: [%1 - connection parameters]. Specify a valid mail server host in configuration or check your network connections and setup.

197 Mail Error Codes 187 BW-MAIL : Error connecting to the mail server - connect exception; connection parameters: [%1]. Description: Could not establish connection to the mail server - connect exception: [%1 - connection parameters]. Verify that your mail server is running or check your network connections. BW-MAIL : An internal error occured while processing configuration data [%1]. Description: An internal error occured while processing configuration data. See [%1-exception] for more details. Check the exception for more details. BW-MAIL : Invalid polling interval [%1] [%2]. Description: Specified polling interval [%1] is not valid. See [%2-exception] for more details. Specify a valid polling interval. BW-MAIL : Could not resolve mail server host name [%1]. Description: The specified host name of mail server [%1] cannot be resolved. Use a valid mail server host name. If the host name is valid, make sure the network naming (DNS) is properly setup.

198 188 Chapter 12 Mail Palette BW-MAIL : Could not decrypt password [%1]. Description: There was an error while decrypting a password. See [%1-exception] for more details. Make sure that the password stored in the repository is not in clear text. BW-MAIL : Could not connect to mail server - invalid username in field [%1] and/or invalid password in field [%2]. Description: Got authentication error while connecting to mail server. Make sure that the username and password are correct. BW-MAIL : %1 Start time = %2 End time= %3 Processing time= %4 Role: inforole Description: %1 Start time = %2 End time= %3 Processing time= %4 none BW-MAIL : %1 Processing times: %2 Role: inforole Description: %1 Processing times: %2 none

199 Mail Error Codes 189 BW-MAIL : Using POP3 Provider from %1 Role: inforole Description: Using POP3 Provider from %1 none BW-MAIL : Username can not be null when Authentication is on Description: Username can not be null when Authentication is on Make sure that the username and password are correct. BW-MAIL : Password can not be null when Authentication is on Description: Password can not be null when Authentication is on Make sure that the username and password are correct. BW-MAIL : Mail is already deleted, Receive Mail activity has 'Delete Mail' turned on Description: Mail is already deleted, Receive Mail activity has 'Delete Mail' turned on Either turn off 'Delete Mail' in Mail Receiver or do not use Confirm activity

200 190 Chapter 12 Mail Palette BW-MAIL : Error building mail message. Cause: %1 Description: There was an error while building a mail message to send. Look at the exception for more information.

201 191 Chapter 13 Manual Work Palette This chapter describes error codes that can be returned by activities in the Manual Work palette. Topics Manual Work Error Codes, page 192

202 192 Chapter 13 Manual Work Palette Manual Work Error Codes BW-Inconcert : Server Connection Reference not set. Description: Server Connection Reference not set. Please Contact TIBCO Support BW-Inconcert : Cannot find shared connection resource: %1. Description: Cannot find shared connection resource: %1. Please Contact TIBCO Support BW-Inconcert : Work details reference not set. Description: Work details reference not set. Please Contact TIBCO Support BW-Inconcert : Fail to get event manager. Description: Fail to get event manager. Please Contact TIBCO Support

203 Manual Work Error Codes 193 BW-Inconcert : Work ID need to be set. Check your input tab to make sure that work ID binded is valid Description: Work ID need to be set. Check your input tab to make sure that work ID binded is valid Please Contact TIBCO Support BW-Inconcert : The inconcert user pool selected is empty. Description: The inconcert user pool selected is empty. Please Contact TIBCO Support BW-Inconcert : Cannot connect to IC Server. Description: Cannot connect to IC Server. Please Contact TIBCO Support BW-Inconcert : Exception caught in assign task activity. Exception Message: %1 Description: Exception caught in assign task activity. Please Contact TIBCO Support

204 194 Chapter 13 Manual Work Palette BW-Inconcert : Cannot find work details reference: %1. Description: Cannot find work details reference: %1. Please Contact TIBCO Support BW-Inconcert : The server %1 is not configured correctly. Run the batch registry script "mkpcattr.btg" before proceeding. Description: The server %1 is not configured correctly. Run the batch registry script "mkpcattr.btg" before proceeding. Please Contact TIBCO Support BW-Inconcert : Failed to locate the ICPLUGIN server %1. Description: Failed to locate the ICPLUGIN server %1 Please Contact TIBCO Support BW-Inconcert : JNI libraries required to interact with Ic Server are missing. Description: JNI libraries required to interact with Ic Server are missing. Please Contact TIBCO Support

205 Manual Work Error Codes 195 BW-Inconcert : Cannot generate workflow server list. Description: Cannot generate workflow server list. Please Contact TIBCO Support BW-Inconcert : Timed out waiting for response. Description: Timed out waiting for response. Please Contact TIBCO Support BW-Inconcert : Error in EventManager: %1. Description: Error in EventManager: %1. Please Contact TIBCO Support BW-Inconcert : Encountered %1 for field %2 when expecting %3. Description: Encountered %1 for field %2 when expecting %3. Please Contact TIBCO Support

206 196 Chapter 13 Manual Work Palette BW-Inconcert : Work Resource cannot be found %1. Description: Work Resource cannot be found %1. Please Contact TIBCO Support BW-Inconcert : Field %1 is already defined in parent schema %2. Description: Field %1 is already defined in parent schema %2. Please Contact TIBCO Support BW-Inconcert : Test Workflow connection Role: inforole Category: connection Description: Test Workflow connection Please Contact TIBCO Support BW-Inconcert : Connected to Workflow Server %1. Role: inforole Category: connection Description: Connected to Workflow Server %1. Please Contact TIBCO Support

207 Manual Work Error Codes 197 BW-Inconcert : The "Extended Details" does not support "Document" fields. All the "Document" fields are ignored. Role: inforole Category: connection Description: The "Extended Details" does not support "Document" fields. All the "Document" fields are ignored. Please Contact TIBCO Support BW-Inconcert : Failed to connect to Workflow Server "%1". Description: Failed to connect to Workflow Server "%1". Please Contact TIBCO Support BW-Inconcert : Error while handling response timeout Description: Error while handling response timeout Please Contact TIBCO Support BW-Inconcert : Exception caught in query docuement activity. Exception message: %1 Description: Exception caught in query document activity. Please Contact TIBCO Support

208 198 Chapter 13 Manual Work Palette BW-Inconcert : Exception caught in work status activity. Exception message: %1 Description: Exception caught in work status activity. Please Contact TIBCO Support BW-Inconcert : Exception caught in work action activity. Exception message: %1 Description: Exception caught in work action activity. Please Contact TIBCO Support BW-Inconcert : Error caught in wait work activity. Exception message: %1 Description: Exception caught in wait work activity. Please Contact TIBCO Support BW-Inconcert : Reserved word cannot be used in schema:%1 Description: Reserved word cannot be used in schema:%1 Please Contact TIBCO Support

209 Manual Work Error Codes 199 BW-Inconcert : Schema Validation Error Description: Schema Validation Error Please Contact TIBCO Support BW-Inconcert : Work Name need to be set. Check your input tab to make sure that work Name binded is valid Description: Work Name need to be set. Check your input tab to make sure that work Name binded is valid Please Contact TIBCO Support BW-Inconcert : Assign Pool is not set. Description: Assign Pool is not set. Please Contact TIBCO Support

210 200 Chapter 13 Manual Work Palette

211 201 Chapter 14 Parse Palette This chapter describes error codes that can be returned by activities in the Parse palette. Topics Parse Error Codes, page 202

212 202 Chapter 14 Parse Palette Parse Error Codes BW-PARSE : Cannot find data format schema resource: %1. Description: Cannot find data format schema resource: %1. Please Contact TIBCO Support BW-PARSE : Cannot create schema from data format schema. Description: Cannot create schema from data format schema. Please Contact TIBCO Support BW-PARSE : Exception in parse eval: %1. Description: Exception in parse eval: %1. Please Contact TIBCO Support BW-PARSE : Line length needs to be Description: Line length needs to be Please Contact TIBCO Support

213 Parse Error Codes 203 BW-PARSE : Hit EOF on row %1 field %2 spanning columns %3 to %4... last row contents was: '%5' Description: Hit EOF on row %1 field %2 spanning columns %3 to %4... last row contents was: '%5' Please Contact TIBCO Support BW-PARSE : Input type is not specified. Description: Input type is not specified. Please Contact TIBCO Support BW-PARSE : Please specify the Input type field. Description: Please specified the Input type field. Please Contact TIBCO Support BW-PARSE : Data format resource not specified. Description: Data format resource not specified. Please Contact TIBCO Support

214 204 Chapter 14 Parse Palette BW-PARSE : Please specify the data format resource. Description: Please specified the data format resource. Please Contact TIBCO Support BW-PARSE : File %1 cannot be opened using encoding method %2 Description: File %1 cannot be opened using encoding method %2 Please Contact TIBCO Support BW-PARSE : %1 must be specified if %2 is selected. Description: %1 must be specified if %2 is selected. Please Contact TIBCO Support BW-PARSE : Format Type must be selected. Description: Format Type must be selected. Please Contact TIBCO Support

215 Parse Error Codes 205 BW-PARSE : Line is too long. Specified Line Delimiter may not match file content. Description: Line is too long. Specified Line Delimiter may not match file content. Please check your input values. BW-PARSE : There are not enough data for the number of required fields in a row. Description: There are not enough data for the number of required fields in a row. Please check your input values.

216 206 Chapter 14 Parse Palette

217 207 Chapter 15 Rendezvous Palette This chapter describes error codes that can be returned by activities in the Rendezvous palette. Topics TIBCO Rendezvous Error Codes, page 208

218 208 Chapter 15 Rendezvous Palette TIBCO Rendezvous Error Codes BW-TIBRV : Cannot create Transport Description: Cannot create Transport Please check the transport configuration BW-TIBRV : Error in sending message Description: Error in sending message Please Contact TIBCO Support BW-TIBRV : Error serializing the message Description: Error serializing the message Please Contact TIBCO Support BW-TIBRV : Error in sending request Description: Error in sending request Please Contact TIBCO Support

219 TIBCO Rendezvous Error Codes 209 BW-TIBRV : Error in processing event: [%1] Description: Error in processing event Please Contact TIBCO Support BW-TIBRV : Cannot create TibrvQueue: [%1] Description: Cannot create TibrvQueue Please Contact TIBCO Support BW-TIBRV : Cannot create rveventcontext: [%1] Description: Cannot create rveventcontext Please Contact TIBCO Support BW-TIBRV : Cannot create reply listener for subject: [%1] Description: Cannot create reply listener, for subject: [%1] Please Contact TIBCO Support BW-TIBRV : Cannot activate TIBRV listener for subject: [%1] Description: Cannot activate TIBRV listener for subject: [%1]

220 210 Chapter 15 Rendezvous Palette Please Contact TIBCO Support BW-TIBRV : Error in sending reply Description: Error in sending reply Please Contact TIBCO Support BW-TIBRV : Reply For-field not set in reply activity Description: Reply For-field not set in reply activity Please set the needed field in the activity BW-TIBRV : Cannot reply to [%1]: activity not found in process Description: Cannot reply to configured eventsource. It is not found in process Make sure to have RV-EventSource in the process to which the reply-activity needs to reply BW-TIBRV : Transport parameter not specified Description: Configure a valid transport reference on the Activity/EventSource Configure a valid transport reference on the Activity/EventSource

221 TIBCO Rendezvous Error Codes 211 BW-TIBRV : Subject parameter not specified Description: Configure a valid subject-name on the Activity/EventSource Configure a valid subject-name on the Activity/EventSource BW-TIBRV : Daemon Certificate not specified Description: Configure a valid daemon certificate in SSL configuration Configure a valid daemon certificate in SSL configuration BW-TIBRV : Identity not specified Description: Configure a valid identity in SSL configuration Configure a valid identity in SSL configuration BW-TIBRV : [%1] Description: The exception will give information for the problem encountered. The exception will give information for the problem encountered. BW-TIBRV : Reply Subject is not specified. Description: Specify the reply subject in the configuration/inputdata.

222 212 Chapter 15 Rendezvous Palette Specify the reply subject in the configuration/inputdata. BW-TIBRV : CM Name is not specified. If omitted, a unique, non-reusable name will be generated for the duration of the transport. Description: CM Name is not specified. If omitted, a unique, non-reusable name will be generated for the duration of the transport. CM Name is not specified. If omitted, a unique, non-reusable name will be generated for the duration of the transport. BW-TIBRV : Specified Global-Variable is not found for [%1]. Description: Specified Global-Variable is not found for the attribute. Please specify the initialized Globle-Variable. BW-TIBRV : Scheduler Weight of 0 is not allowed with the Worker Complete Time Description: Scheduler Weight of 0 is not allowed with the Worker Complete Time Please refer to the documentation for correct combination of values

223 TIBCO Rendezvous Error Codes 213 BW-TIBRV : Reply not Specified Description: Specify the input schema for the Rendezvous Reply activity. Specify the input schema for the Rendezvous Reply activity. BW-TIBRV : Rendezvous Subscriber/Wait for Rendezvous Message-exception setting certified output field: [%1], Event-Source-Name: [%2]. Role: warnrole Description: Rendezvous Subscriber/Wait for Rendezvous Message-exception setting certified output field. BW-TIBRV : Transport selected for the Rendezvous Subscriber/Wait for Rendezvous Message does not support confirm. Role: warnrole Description: Transport selected for the Rendezvous Subscriber/Wait for Rendezvous Message does not support confirm. BW-ADVISORY : Advisory listening queue caught exception: %1 Description: Advisory listening queue caught exception. Exception detail provided Please Contact TIBCO Support

224 214 Chapter 15 Rendezvous Palette BW-ADVISORY : Advisory: %1 Role: inforole Description: Advisory provided N/A BW-ADVISORY : Advisory info: %1 Role: inforole Description: Advisory information provided N/A

225 215 Chapter 16 SOAP Palette This chapter describes error codes that can be returned by activities in the SOAP palette. Topics SOAP Error Codes, page 216

226 216 Chapter 16 SOAP Palette SOAP Error Codes SOAPPLUGIN : Unable to create Transport s Description: Error initializing the transport Please check the transport configuration SOAPPLUGIN : SOAP Envelope is invalid s Description: The request or response enevelope received from the remote host is invalid Please verify the SOAP envelope SOAPPLUGIN : Unable to serialize the SOAP envelope s Description: Please check the input data to this activity and the make sure that it is consistent with the WSDL description SOAPPLUGIN : Unable to deserialize the SOAP envelope s Description: Please check the input data to this activity and the make sure that it is consistent with the WSDL description

227 SOAP Error Codes 217 SOAPPLUGIN : Unable to process the SOAP envelope s Description: Please check the input data to this activity and the WSDL description SOAPPLUGIN : The SOAP processor could not be instantiated s Description: This is an internal error Please contact TIBCO support SOAPPLUGIN : The SOAP service is invalid s Description: This is an internal error Please contact TIBCO support SOAPPLUGIN : SOAP Envelope has no data s Description: The request or response message received from the remote server is invalid Please make sure the endpoint is a valid soap 1.1 server

228 218 Chapter 16 SOAP Palette SOAPPLUGIN : Error parsing SOAP message s Description: The request or response message received from the remote server is invalid Please make sure the endpoint is a valid soap 1.1 server SOAPPLUGIN : Error while adding xsi:type attribute s Description: Internal error Please make sure that you are using the supported schema flavor SOAPPLUGIN : Part accessor for the message-part not found in the soap envelope s Description: The request or response message received from the remote server is invalid Please check the input data to this activity and the make sure that it is consistent with the WSDL description SOAPPLUGIN : Unable to send soap reply message s Description: The remote server may have closed the connection or there is an internal exception Please correct the connection error

229 SOAP Error Codes 219 SOAPPLUGIN : Unable to send reply or fault message. Please check the operation type s Description: The specified operation may not throw a soap fault or send soap reply Please make sure that you have an operation which allows reply and fault messages SOAPPLUGIN : Unable to convert a soap fault message to activity output s Description: This is an internal error occurs when the soap request activity is not initialized Please contact TIBCO support SOAPPLUGIN : Unable to initialize the URL resolvers for builtin services s Description: This is an internal error Please contact TIBCO support SOAPPLUGIN : Unable to get the specified resource s Description: The resource URL or filter may be invalid or there is no resolver for the kind of URL specified Please specify the correct URL

230 220 Chapter 16 SOAP Palette SOAPPLUGIN : A security error while trying to load the certficiate [ %1 ] s Description: The certificate path may be invalid or the certificate type is unsupported Please specify the correct path SOAPPLUGIN : An IO error occurred while trying to load the certificate [ %1 ] s Description: The certificate path may be invalid or the certificate type is unsupported Please specify the correct path SOAPPLUGIN : An IO error while trying send soap message [ %1 ] s Description: SOAP Driver could not send the message Please make sure that you have specified the correct endpoint infomation SOAPPLUGIN : An IO error while loading client key [ %1 ] s Description: The client key path may be invalid or the KEY type is unsupported Please specify the correct path

231 SOAP Error Codes 221 SOAPPLUGIN : Soap fault message is received s Description: Fault Details element provides more informaiton Remote server has responded with a soap fault message, it is usually thrown when the input data is invalid or soap server doesn't support the version of the saop message or mandatory soap headers are not specified SOAPPLUGIN : HTTP error [ %1 ] Message Received s Description: Please refer to the HTTP specifications for more information about the error code SOAPPLUGIN : Input data error. Resource path [ %1 ] is invalid s Description: Please correct the resource path in the retrieve resources activity SOAPPLUGIN : Input data error. Resource filter [ %1 ] is invalid s Description: Please specify the correct resource filter wsdl, wsil or xsd

232 222 Chapter 16 SOAP Palette SOAPPLUGIN : Message part accessor not found in part [ %1 ] s Description: The request or response message received from the remote server is invalid Please check the input data to this activity and the make sure that it is consistent with the WSDL description SOAPPLUGIN : Data not found for resource [ %1 ] using filter [ %2 ] s Description: The supported filters are wsdl, wsil or xsd. For other filters resourcedata may not available as ascii Please correct the resource path in the retrieve resources activity SOAPPLUGIN : Duplicate soapaction value [ %1 ] s Description: The soapaction value must be unique accross all Soap Event Sources to correctly dispatch the soap messages Please check other SOAP Event Source activities and make sure that the soapaction is not duplicated SOAPPLUGIN : Duplicate WSDL Target Namespace value [ %1 ] s Description: The Target Namespace specified on advanced tab must be unique accross all Soap Event Sources Please check other SOAP Event Source activities and make sure that the Target Namespace is not duplicated

233 SOAP Error Codes 223 SOAPPLUGIN : Configuration Error. The specified operation name [ %1 ] not found in porttype [ %2 ] s Description: The operation name is invalid Please ensure that the WSDL file has the specified operation name SOAPPLUGIN : Configuration Error. Transport is not specified for this service s Description: Please specify a HTTP or HTTPS transport using HTTP Connection resource SOAPPLUGIN : Configuration Error. SoapAction is not specified for this service s Description: Please specify a non null SoapAction SOAPPLUGIN : Configuration Error. Operation style is invalid s Description: Please specify document or rpc

234 224 Chapter 16 SOAP Palette SOAPPLUGIN : Configuration Error. Use attribute is invalid s Description: Please specify literal or encoded SOAPPLUGIN : Configuration Error. The specified operation name [ %1 ] not found in port [ %2 ] in service [ %3 ] s Description: The operation name is invalid Please ensure that the WSDL file has the specified operation name SOAPPLUGIN : Configuration Error. The message part [ %1 ] is defined using 'element' attribute instead of 'type' s Description: Soap encoding rules require the message part to be defined with type attribute Please modify the WSDL message definition to use schema type SOAPPLUGIN : Configuration Error. Only one message part can be defined using 'type' attribute for document style services in literal encoding s Description: Document Literal encoding rules require only one message part to be defined with type attribute Please modify the WSDL message definition

235 SOAP Error Codes 225 SOAPPLUGIN : Configuration Error. All Parts must be defined using either 'type' or 'element' s Description: Mixing type and element attributes for the message parts is not permitted Please modify the WSDL message definition SOAPPLUGIN : Configuration Error. Multiple %1 parts defined using same name are not supported s Description: Local names for two or more parts is same Please modify the headers configuration SOAPPLUGIN : Runtime error in SOAP service: %1 s Description: This is an internal error Please contact TIBCO support SOAPPLUGIN : Runtime error in SOAP client: %1 s Description: This is an internal error Please contact TIBCO support

236 226 Chapter 16 SOAP Palette SOAPPLUGIN : Unable to serialize the MIME envelope. Please make sure that mimepart content (binarycontent textcontent filename) is consistent with content-type s Description: Unable to serialize the MIME envelope. Please make sure that mimepart content (binarycontent textcontent filename) is consistent with content-type Please make sure that mimepart content (binarycontent textcontent filename) is consistent with content-type SOAPPLUGIN : Unable to dispatch the SOAP message to a Service. The URL/SoapAction specified in the incoming message was invalid. s Description: Unable to dispatch the SOAP message to a Service. The URL/SoapAction specified in the incoming message was invalid. Please make sure that the client is using an up to date WSDL file SOAPPLUGIN : An exception with the following message was thrown while deserializing/processing the incoming SOAP message: [ % 1] s Description: An exception was thrown while deserializing/processing the incoming SOAP message. Please make sure that the client is using an up to date WSDL file

237 SOAP Error Codes 227 SOAPPLUGIN : The system cannot find the file specified s Description: The system cannot find the file specified Please make sure that the specified file exists on the system SOAPPLUGIN : A java exception has occured. [ %1 ] s Description: The configuration or input data of the activity might have caused this error Please correct the errors SOAPPLUGIN : Illegal Argument exception has occured. [ %1 ] s Description: The configuration or input data of the activity might have caused this error Please correct the errors SOAPPLUGIN : A java exception has occured while constructing the WSDL file. [ %1 ] s Description: The configuration or input data of the activity might have caused this error Please correct the errors

238 228 Chapter 16 SOAP Palette SOAPPLUGIN : IO exception has occured. [ %1 ] s Description: The configuration or input data of the activity might have caused this error Please correct the errors SOAPPLUGIN : Unable to create WSDL file due to insufficient configuration s Description: Provide values for all the mandatroty configuration fields marked in the bold font Please correct the errors

239 229 Chapter 17 TCP Palette This chapter describes error codes that can be returned by activities in the TCP palette. Topics TCP Error Codes, page 230

240 230 Chapter 17 TCP Palette TCP Error Codes BW-TCP : Cannot start TCP Receiver on Host '%1', Port '%2'. Reason: %3 Description: Cannot create Server Socket on %1:%2. Reason: %3 Please correct the error and retry. BW-TCP : 'TCP connection' field is required. Description: 'TCP connection' field is required. Please correct the error and retry. BW-TCP : Invalid Port; port must be numeric. Error: %1 Description: Invalid Port; port must be numeric. Error: %1 Please correct the error and retry. BW-TCP : No value specified for the 'data' input field. Description: No value specified for the 'data' input field. Please correct the error and retry.

241 TCP Error Codes 231 BW-TCP : Cannot process TCP request. Reason: %1 Description: Cannot process TCP request. Reason: %1 Please correct the error and retry. BW-TCP : Error reading TCP data. Reason: %1 Description: Error reading TCP data. Reason: %1 Please correct the error and retry. BW-TCP : Unknown separator type: %1. Description: Unknown separator type: %1. Please correct the error and retry. BW-TCP : Error opening TCP Connection. Reason: %1. Description: Error opening TCP Connection. Reason: %1. Please correct the error and retry.

242 232 Chapter 17 TCP Palette BW-TCP : Error opening TCP Connection. Reason: Host '%1' unknown Description: Error opening TCP Connection. Reason: Host '%1' unknown Please correct the error and retry. BW-TCP : Error reading data. Reason: Bytes to read can not be zero Description: Error reading data. Reason: Bytes to read can not be zero Please correct the error and retry. BW-TCP : Error reading data. Reason: Stream has no data, end of stream reached. Description: Error reading data. Reason: Stream has no data, end of stream reached. Please correct the error and retry. BW-TCP : Exception reading data. Separator '%1' not found in data after reading %2 bytes. Reason: %3 Description: Exception reading data. Separator '%1' not found in data after reading %2 bytes. Reason: %3 Please correct the error and retry.

243 TCP Error Codes 233 BW-TCP : Exception closing TCP Connection. Reason: %1 Description: Exception closing TCP Connection. Reason: %1 Please correct the error and retry. BW-TCP : Could not read from TCP connection. The input connection is either invalid or closed. Description: Could not read from TCP connection. The input connection is either invalid or closed. Please correct the error and retry. BW-TCP : Could not write to TCP connection. The input connection is either invalid or closed. Description: Could not write to TCP connection. The input connection is either invalid or closed. Please correct the error and retry. BW-TCP : Can not start TCP Receiver on Host='%1',Port='%2'. Another TCP Receiver is already running with the same configuration. Description: Can not start TCP Receiver on Host='%1',Port='%2'. Another TCP Receiver is already running with the same configuration. Please correct the error and retry.

244 234 Chapter 17 TCP Palette BW-TCP : Error closing TCP connection. Reason: No connection is available which matches the input connection key Description: Error closing TCP connection. Reason: No connection is available which matches the input connection key Please correct the error and retry. BW-TCP : Error writing data. Reason: %1 Description: Error writing data. Reason: %1 Please correct the error and retry. BW-TCP : Error writing data. Reason: Bytes to write can not be zero Description: Error writing data. Reason: Bytes to write can not be zero Please correct the error and retry. BW-TCP : Error in configuring field '%1'. Pl. specify comma separated byte values e.g. "0x0A,0x05,0x0c". For valid string representation of byte values, refer to the Javadoc for decode(string nm) method of class java.lang.byte Description: Error in configuring field '%1'. Pl. specify comma separated byte values e.g. "0x0A,0x05,0x0c". For valid string representation of byte values, refer to the Javadoc for decode(string nm) method of class java.lang.byte Please correct the error and retry.

245 TCP Error Codes 235 BW-TCP : Timeout while reading TCP data Description: Timeout while reading TCP data Please correct the error and retry.

246 236 Chapter 17 TCP Palette

247 237 Chapter 18 Transaction Palette This chapter describes error codes that can be returned by activities in the Transaction palette. Topics Transaction Error Codes, page 238

248 238 Chapter 18 Transaction Palette Transaction Error Codes BW-TRANS : Initialization Error. %1 Description: BW-TRANS : Get transaction status error. %1 Description: Exception occurred while trying to obtain the status of the transaction from the transaction manager. BW-TRANS : Transaction setrollbackonly error. %1 Description: Exception occurred while trying to mark the transaction for rollback only

249 Transaction Error Codes 239 BW-TRANS : Unable to obtain the status of the transaction. Exception [%1] occurred. %2 Description: Exception occurred while trying to obtain the status of the transaction. BW-TRANS : Unable to set the transaction for rollback only. Exception [%1] occurred. %2 Description: Exception occurred while trying to set the transaction for rollback only BW-TRANS : %1 Role: debugrole Description: Debug Trace Message None BW-JTATM : Transaction Manager Initialization Error. %1 Description:

250 240 Chapter 18 Transaction Palette BW-JTATM : Unable to obtain the status of the transaction. The method 'UserTransaction.getStatus' raised exception [%1]. %2 Description: Exception occurred on invocation of the method 'javax.transaction.usertransaction.getstatus()'. BW-JTATM : Unable to set the transaction for rollback only. The method 'UserTransaction.setRollbackOnly' raised exception [%1]. %2 Description: Exception occurred on invocation of the method 'javax.transaction.usertransaction.setrollbackonly()'. BW-JTATM : Transaction begin error. The method 'UserTransaction.begin' raised exception [%1]. %2 Description: Exception occurred on invocation of the method 'javax.transaction.usertransaction.begin()' Please correct the error stated in the exception message and retry

251 Transaction Error Codes 241 BW-JTATM : Transaction commit error. The method 'UserTransaction.commit' raised exception [%1]. %2 Description: Exception occurred on invocation of the method 'javax.transaction.usertransaction.commit()' Please correct the error stated in the exception message and retry BW-JTATM : Transaction rollback error. The method 'UserTransaction.rollback' raised exception [%1]. %2 Description: Exception occurred on invocation of the method 'javax.transaction.usertransaction.rollback()' Please correct the error stated in the exception message and retry BW-JTATM : Unable to set timeout for transaction. The method 'UserTransaction.setTransactionTimeout' raised exception [%1]. %2 Description: Exception occurred on invocation of the method 'javax.transaction.usertransaction.settransactiontimeout()' Please correct the error stated in the exception message and retry BW-JTATM : Unable resume the transaction. The method 'resume' of the JTATM raised exception [%1]. %2 Description: Exception occurred on invocation of the method 'resume'.

252 242 Chapter 18 Transaction Palette BW-JTATM : Unable suspend the transaction. The method 'suspend' of the JTATM raised exception [%1]. %2 Description: Exception occurred on invocation of the method 'suspend'. BW-JTATM : XAResource registration error. The method 'registerresource' of the JTATM raised exception [%1]. %2 Description: Exception occurred when trying register XAResource with the Transaction Manager BW-JTATM : Unable to enlist XAResource with the transaction object. The method 'enlistresource' of the JTATM raised exception [%1]. %2 Description: Exception occurred when trying enlist XAResource with the transaction object BW-JTATM : Unable to delist XAResource from the transaction object. The method 'delistresource' of the JTATM raised exception [%1]. %2 Description: Exception occurred when trying delist XAResource from the transaction context

253 Transaction Error Codes 243 BW-JTATM : The JTA UserTransaction Configuration reference [%1] specified for the Transaction Group contains incorrect field values. Description: The JTA UserTransaction Configuration activity referenced by this Transaction group contains invalid field values. Please correct the error and retry. BW-JTATM : Connection Test Failed. %1 Description: Unable to establish connection to the server. Please correct the error stated in the exception message and retry. BW-JTATM : Connection Test Failed. Exception [%1] occurred. Description: Unable to establish connection to the server. Exception occurred Please correct the error stated in the exception message and retry. BW-JTATM : Java class [%1] not found in the classpath. ClassNotFoundException occurred. %2 Description: ClassNotFoundException occurred while trying to access the specified Java class. Please verify that the specified class file is contained in the classpath.

254 244 Chapter 18 Transaction Palette BW-JTATM : Error occurred while trying to obtain the JNDI Configuration shared resource reference [%1]: %2 Description: Unable to get the shared JNDI Configuration resource referenced by the JTA UserTransaction Configuration Please correct the error and retry. BW-JTATM : Unable to create an instance of 'javax.naming.initialcontext'. NamingException occurred. %1 Description: Exception of type 'javax.naming.namingexception' occurred while trying to construct an instance of 'javax.naming.initialcontext'. Please correct the specified NamingException and retry. BW-JTATM : Unable to create an instance of 'javax.naming.initialcontext'. Exception [%1] occurred. %2 Description: Exception occurred while trying to construct an instance of 'javax.naming.initialcontext'. Please correct the error stated in the exception message and retry.

255 Transaction Error Codes 245 BW-JTATM : Unable to obtain UserTransaction object for the JNDI name [%1]. NamingException occurred. %2 Description: Exception of type 'javax.naming.namingexception' occurred on invocation of the method 'javax.naming.initialcontext.lookup(..)' Please correct the specified NamingException and retry. BW-JTATM : Unable to obtain the UserTransaction object for the JNDI name [%1]. Exception [%2] occurred. %3 Description: Exception occurred on invocation of the method 'javax.naming.initialcontext.lookup(..)' Please correct the specified NamingException and retry. BW-JTATM : %1 Role: debugrole Description: Debug Trace Message None BW-XATM : Transaction Manager Initialization Error. The method 'init' of the [%1] Transaction Manager raised exception [%2]. %3 Description:

256 246 Chapter 18 Transaction Palette BW-XATM : Unable to obtain the status of the transaction. The method 'getstatus' of the [%1] Transaction Manager raised exception [%2]. %3 Description: Exception occurred on invocation of the Transaction Manager's getstatus method BW-XATM : Unable to set the transaction for rollback only. The method 'setrollbackonly' of the [%1] Transaction Manager raised exception [%2]. %3 Description: Exception occurred on invocation of the Transaction Manager's setrollbackonly method. BW-XATM : Transaction begin error. The method 'begin' of the [%1] Transaction Manager raised exception [%2]. %3 Description: Exception occurred on invocation of the Transaction Manager's begin method Please correct the error stated in the exception message and retry

257 Transaction Error Codes 247 BW-XATM : Transaction commit error. The method 'commit' of the [%1] Transaction Manager raised exception [%2]. %3 Description: Exception occurred on invocation of the Transaction Manager's commit method Please correct the error stated in the exception message and retry BW-XATM : Transaction rollback error. The method 'rollback' of the [%1] Transaction Manager raised exception [%2]. %3 Description: Exception occurred on invocation of the TransactionManager's rollback method Please correct the error stated in the exception message and retry BW-XATM : Unable to set timeout for transaction. The method 'settransactiontimeout' of the [%1] Transaction Manager raised exception [%2]. %3 Description: Exception occurred on invocation of the Transaction Manager's settransactiontimeout method Please correct the error stated in the exception message and retry

258 248 Chapter 18 Transaction Palette BW-XATM : Unable resume the transaction. The method 'resume' of the [%1] Transaction Manager's exception [%2]. %3 Description: Exception occurred on invocation of the TransactionManager's resume method BW-XATM : Unable suspend the transaction. The method 'suspend' of the [%1] Transaction Manager raised exception [%2]. %3 Description: Exception occurred on invocation of the Transaction Manager's suspend method BW-XATM : XAResource registration error. The method 'registerresource' of the [%1] Transaction Manager raised exception [%2]. %3 Description: Exception occurred when trying register XAResource with the Transaction Manager

259 Transaction Error Codes 249 BW-XATM : Unable to enlist XAResource with the transaction object. The method 'enlistresource' of the [%1] Transaction Manager raised exception [%2]. %3 Description: Exception occurred when trying enlist XAResource with the transaction object BW-XATM : Unable to delist XAResource from the transaction object. The method 'delistresource' of the [%1] Transaction Manager raised exception [%2]. %3 Description: Exception occurred when trying delist XAResource from the transaction object BW-XATM : The XA TransactionManager Configuration reference [%1] specified for the Transaction Group contains incorrect field values. Description: The XA TransactionManager Configuration activity referenced by this Transaction group contains invalid field values. Please correct the error and retry. BW-XATM : The XA TransactionManager Configuration reference [%1] not found Description: Unable to obtain the specified XA TransactionManager Configuration shared resource reference Please correct the error and retry.

260 250 Chapter 18 Transaction Palette BW-XATM : The XA TransactionManager Configuration reference [%1] not found in repository Description: The repository does not contain the specified XA TransactionManager Configuration shared resource reference Please correct the error and retry. BW-XATM : Exception occurred while trying to obtain the XA TransactionManager Configuration reference [%1]: %2 Description: Unable to obtain the XA TransactionManager Configuration shared resource reference Please correct the error and retry. BW-XATM : Method [%1] of the [%2] Transaction Manager raised exception [%3]. %4 Description: Exception occurred on invocation of the method of the Transaction Manager Please correct the error stated in the exception message and retry

261 Transaction Error Codes 251 BW-XATM : Invalid [%1] Transaction Manager reference (XATransactionManager.m_tm == null). Description: XA Transaction Manager reference contains invalid value. Make sure the method "XATransactionManager.setTransactionManager" is called after constructing the custom TransactionManager in the method "XATransactionManager.init". BW-XATM : ClassNotFoundException occurred during initialization of the [%1] transaction manager. The classpath does not contain the required [%2] transaction manager's class or jar files. %3 Description: ClassNotFoundException occurred while trying to access the transaction manager's Java class. Please verify that the required transaction manger's java jar or class file is contained in the classpath. BW-XATM : %1 object store directory: %2 Role: inforole Description: Location of the transaction manager object store directory BW-XATM : %1 Role: debugrole Description: Debug Trace Message None

262 252 Chapter 18 Transaction Palette

263 253 Chapter 19 XML Activities Palette This chapter describes error codes that can be returned by activities in the XML Activities palette. Topics XML Error Codes, page 254

264 254 Chapter 19 XML Activities Palette XML Error Codes BW-XML : Internal error occurred. Class=%1, Method=%2, Reason=%3 Description: Internal error occurred Please Contact TIBCO Support BW-XML : Activity configuration error. %1 Description: This activity is not configured correctly Please correct the error and retry. BW-XML : Unable to get value for the global variable [%1]. %2 Description: Unable to get value for the specified global variable Make sure that the specified global variable is defined. BW-XML : Invalid global variable. The global variable [%1] may not have been defined. Description: Unable to get value for the specified global variable Make sure that the specified global variable is defined.

265 XML Error Codes 255 BW-XML : An error occurred while serializing the XML: %1 Description: An error occuring while serializing the XML. Please correct. BW-XML : An error occurred while parsing: %1. Description: Error occurred while parsing. Examine input for validity.. BW-XML : The [%1] occurred during XSLT transformation: %2 Description: Error occurred during XSLT transformation. Examine input for validity.. BW-XML : No stylesheet for XSLT transformation Description: No stylesheet for XSLT transformation Examine input for validity..

266 256 Chapter 19 XML Activities Palette BW-XML : The selected encoding [%1] is not valid. Description: The selected encoding is invalid. Please use a valid encoding. BW-XML : Encoding error occurred: %1. Description: Error occurred while encoding. Please ensure that selected encoding is legal. BW-XML : The encoded bytes content is empty. Description: Content cannot be empty. Please ensure that the content is not empty. BW-XML : [%1] Description:?.?

267 XML Error Codes 257 BW-XML : The input document's root element [%1] does not match the desired output's root element [%2]. Description: The output type doesn't match the root of the input document. Either modify the incoming document or change the output mapping to accurately reflect that docuement's contents. BW-XML : Using the old XML render code Role: inforole Description: Using the old XML render code BW-XML : Using the optimized XML render code Role: inforole Description: Using the optimized XML render code

268 258 Chapter 19 XML Activities Palette