National Certificate in Cranes (Mobile Crane Supervision) (Level 5)

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "National Certificate in Cranes (Mobile Crane Supervision) (Level 5)"

Transcription

1 NZQF NQ Ref 0118 Version 5 Page 1 of 6 National Certificate in Cranes (Mobile Crane Supervision) (Level 5) Level 5 Credits 100 This qualification is expiring. The last date to meet the requirements is 31 December Purpose This National Certificate is designed to provide recognition of the advanced on- and off-site knowledge of the operation and supervision of mobile cranes, as well as senior administration and management skills. On completion of this qualification, people will have the knowledge and skills to pilot overweight and overdimension loads; investigate and report a crane accident; plan and direct complex lifting operations; and prepare and sling complex loads. People will also have the skills to use office administration and communication systems, supervise workplace operations, produce documents using a computer, give oral instructions, carry out mathematical calculations, and have knowledge of employment agreements. All standards in the qualification are compulsory because mobile crane supervision consists of a set of well-defined knowledge and skills that are applicable across all workplaces and locations. This qualification shares standards in common with the National Certificate in Cranes (Advanced Crane Operation) (Level 5) [Ref: 1520] which is designed for people required to operate cranes in diverse and complex situations, whereas this qualification is designed for supervisors in crane operations. This qualification builds on the National Certificate in Crane Operation with strands in Mobile Crane, Overhead Crane, Tower Crane, and Crawler Crane [Ref: 0116]. People who have completed this qualification can progress to the National Diploma in Cranes (Level 5) with strands in Mobile and Tower [Ref: 1163], or the National Diploma in Cranes (Management) (Level 6) [Ref: 1164]. Replacement Information This qualification and the National Certificate in Cranes (Tower Crane Supervision) (Level 5) [Ref: 0120] have been replaced by the New Zealand Certificate in Crane Supervision (Level 4) [Ref: 1794]. Special Notes Crane operators will require the appropriate road traffic licence when driving cranes on public roads.

2 NZQF NQ Ref 0118 Version 5 Page 2 of 6 Credit Range Compulsory Levels 1-3 credits 16 Level 4 credits 39 Level 5 credits 25 Level 6 credits 20 Total 100 Requirements for Award of Qualification Award of NZQF National Qualifications Credit gained for a standard may be used only once to meet the requirements of this qualification. Unit standards and achievement standards that are equivalent in outcome are mutually exclusive for the purpose of award. The table of mutually exclusive standards is provided on the New Zealand Qualifications Authority (NZQA) website: Reviewed standards that continue to recognise the same overall outcome are registered as new versions and retain their identification number (ID). Any version of a standard with the same ID may be used to meet qualification requirements that list the ID and/or that specify the past or current classification of the standard. Summary of Requirements Prior award of National Certificate in Crane Operation [Ref: 0116] with Strand Mobile or Strand Mobile Crane Compulsory standards Detailed Requirements Compulsory The following standards are required Business > Business Administration > Business Administration Services 121 Use office administration and communication systems 2 5 Business > Business Operations and Development > Employment Relations Demonstrate knowledge of the requirements of employment agreements 4 3 Business > Business Operations and Development > Systems and Resources Management 1988 Supervise workplace operations 4 6

3 NZQF NQ Ref 0118 Version 5 Page 3 of 6 Computing and Information Technology > Computing > Generic Computing Produce documents for a workplace using a computer 3 3 Humanities > Communication Skills > Interpersonal Communications 1312 Give oral instructions in the workplace 3 3 Sciences > Mathematics > Measurement 5228 Take measurements and use calculations to solve measurement problems 1 3 Sciences > Mathematics > Trigonometry 5236 Use Pythagoras' Theorem and trigonometry to find unknowns in right-angled triangles 1 2 Service Sector > Commercial Road Transport > Heavy Haulage 1768 Pilot an overweight load and an overdimension load as a Class 2 certified pilot 4 5 Service Sector > Cranes > Crane Inspection 3823 Investigate and report a crane accident 6 20 Service Sector > Cranes > Crane Operation 3799 Plan and direct complex lifting operations Prepare and sling complex loads for crane operations 4 25 Transition Arrangements Version 5 Version 5 was issued to indicate that this qualification is expiring. This qualification has been replaced by the New Zealand Certificate in Crane Supervision (Level 4) [Ref: 1794]. For detailed information see Review Summaries on the NZQA website.

4 NZQF NQ Ref 0118 Version 5 Page 4 of 6 People currently working towards the replaced qualification may either complete the requirements or transfer their results to the replacement qualification. It is not intended that anyone be disadvantaged by this review. However, anyone who feels they have been disadvantaged may appeal to Opportunity The Training Organisation at the address below. Previous versions of the qualification Version 4 was issued following review to update content. Changes to structure and content included: Standards 56, 57, 62, and 1279 were removed as they were no longer required by industry; standards 497, 3792, 6400, 6401, and 6402 were removed as they are already included in the prerequisite qualification; standards 1312, 19798, and were added as they cover skills required by mobile crane supervisors; and total qualification credits were decreased from 125 to 100. Version 3 was issued to update standards as a result of the Cranes standard review. Version 2 was issued to include unit standards 121 and NZQF National Qualification Registration Information Process Version Date Last Date for Assessment Registration 1 November 1995 December 2010 Revision 2 September 1997 December 2010 Review 3 September 2000 December 2013 Review 4 December 2009 December 2013 Review 5 September 2012 December 2013 Standard Setting Body Freepost 5164 PO Box Royal Oak Auckland 1345 Telephone Website Other standard setting bodies whose standards are included in the qualification NZQA Tranzqual ITO

5 NZQF NQ Ref 0118 Version 5 Page 5 of 6 Certification This certificate will display the logos of NZQA, Opportunity The Training Organisation and the organisation that has been granted consent to assess against standards that meet the requirements of the qualification (accredited). Classification This qualification is classified according to the classification system listed on the Directory of Assessment Standards (DAS) and the New Zealand Standard Classification of Education (NZSCED) system as specified below. DAS Classification NZSCED Code Description Code Description 292 Service Sector > Cranes Engineering and Related Technologies > Mechanical and Industrial Engineering and Technology > Plant and Machine Operations Quality Management Systems Providers and Industry Training Organisations must be granted consent to assess by a recognised Quality Assurance Body before they can register credits from assessment against standards. Organisation with consent to assess and Industry Training Organisations assessing against standards must engage with the moderation system that applies to those standards. Consent to assess requirements and the moderation system are outlined in the associated Consent and Moderation Requirements (CMR) for each standard.

6 NZQF NQ Ref 0118 Version 5 Page 6 of 6 Prerequisite Diagram

National Certificate in Occupational Health and Safety (Co-ordination) (Level 4)

National Certificate in Occupational Health and Safety (Co-ordination) (Level 4) NZQF NQ Ref 0944 Version 3 Page 1 of 5 National Certificate in Occupational Health and (Co-ordination) (Level 4) Level 4 Credits 65 Purpose This qualification is designed for all industries and has a flexible

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2019.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2019. NZQF NQ Ref 0899 Version 4 Page 1 of 5 National Diploma in Intelligence Analysis (Level 5) Level 5 Credits 123 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

This qualification is expiring. The last date to meet the requirements is 31 December 2019.

This qualification is expiring. The last date to meet the requirements is 31 December 2019. NZQF NQ Ref 0776 Version 5 Page 1 of 5 National Certificate in Credit Management (Level 4) Level 4 Credits 45 This qualification is expiring. The last date to meet the requirements is 31 December 2019.

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2019.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2019. NZQF NQ Ref 0432 Version 6 Page 1 of 9 National Certificate in Surveying (Assistant) (Level 3) Level 3 Credits 66 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

National Certificate in Real Estate (Salesperson) (Level 4)

National Certificate in Real Estate (Salesperson) (Level 4) NZQF NQ Ref 1543 Version 3 Page 1 of 5 National Certificate in Real Estate (Salesperson) (Level 4) Level 4 Credits 47 This qualification has been reviewed. The last date to meet the requirements is 31

More information

This qualification is expiring. The last date to meet the requirements is 31 December 2015.

This qualification is expiring. The last date to meet the requirements is 31 December 2015. NZQF NQ Ref 0499 Version 4 Page 1 of 6 National Certificate in Printing (Dry Offset) () Credits 57 This qualification is expiring. The last date to meet the requirements is 31 December 2015. Transition

More information

National Diploma in Contact Centre Management (Level 5)

National Diploma in Contact Centre Management (Level 5) NZQF NQ Ref 0974 Version 3 Page 1 of 6 National Diploma in Contact Centre Management (Level 5) Level 5 Credits 120 Purpose This diploma is for people who hold or aspire to management roles above first

More information

National Certificate in Credit Administration (Credit Control) (Level 3)

National Certificate in Credit Administration (Credit Control) (Level 3) NZQF NQ Ref 1189 Version 4 Page 1 of 5 National Certificate in Credit Administration (Credit Control) (Level 3) Level 3 Credits 55 This qualification has been reviewed. The last date to meet the requirements

More information

National Certificate in Fixed Fire Protection Systems (Level 4) Level 4

National Certificate in Fixed Fire Protection Systems (Level 4) Level 4 NZQF NQ Ref 0570 Version 4 Page 1 of 8 National Certificate in Fixed Fire Protection Systems (Level 4) Level 4 Credits 174 This qualification has been reviewed. The last date to meet the requirements is

More information

National Certificate in Infrastructure Works (Contract Management) (Level 5) Level 5

National Certificate in Infrastructure Works (Contract Management) (Level 5) Level 5 NZQF NQ Ref 1653 Version 2 Page 1 of 6 Infrastructure Works (Contract Management) (Level 5) Level 5 Credits 46 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

National Certificate in Industrial Rope Access (Working on Ropes) (Level 4)

National Certificate in Industrial Rope Access (Working on Ropes) (Level 4) NZQF NQ Ref 1017 Version 3 Page 1 of 5 National Certificate in Industrial Rope Access (Working on Ropes) () Credits 118 This qualification has been reviewed. The last date to meet the requirements is 31

More information

National Certificate in Electronics Technology (Level 2) Level 2. Credits 40. Purpose. Credit Range

National Certificate in Electronics Technology (Level 2) Level 2. Credits 40. Purpose. Credit Range NZQF NQ Ref 0240 Version 7 Page 1 of 5 National Certificate in Electronics (Level 2) Level 2 Credits 40 Purpose This is an introductory certificate for people interested in electronics and who may wish

More information

National Certificate Civil Engineering - Asset Management (Operations) (Level 4)

National Certificate Civil Engineering - Asset Management (Operations) (Level 4) NZQF NQ Ref 0760 Version 2 Page 1 of 5 National Certificate Civil Engineering - Asset Management (Operations) (Level 4) Level 4 Credits 87 This qualification is expiring. The last date to meet the requirements

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. NZQF NQ Ref 1431 Version 4 Page 1 of 6 National Certificate in Business (Level 3) Level 3 Credits 46 This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. Transition

More information

This qualification is expiring. The last date to meet the requirements is 31 December 2012.

This qualification is expiring. The last date to meet the requirements is 31 December 2012. NZQF NQ Ref 0960 Version 2 Page 1 of 7 National Diploma in Logistics Operations Level 5 Credits 130 This qualification is expiring. The last date to meet the requirements is 31 December 2012. Purpose The

More information

National Certificate in Business (First Line Management) (Level 3)

National Certificate in Business (First Line Management) (Level 3) NZQF NQ Ref 0743 Version 5 Page 1 of 6 National Certificate in Business (First Line ) (Level 3) Level 3 Credits 45 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

National Certificate in Business Administration and Computing (Level 2) Level 2

National Certificate in Business Administration and Computing (Level 2) Level 2 NZQF NQ Ref 0008 Version 7 Page 1 of 8 National Certificate in Business Administration and Computing (Level 2) Level 2 Credits 60 This qualification has been reviewed. The last date to meet the requirements

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. NZQF NQ Ref 1476 Version 3 Page 1 of 9 National Certificate in Financial Services (Financial Advice) (Level 5) with strands in Investment Advice, Insurance Advice, and Residential Property Lending Advice

More information

National Certificate in Business Administration and Computing (Level 3) Level 3

National Certificate in Business Administration and Computing (Level 3) Level 3 NZQF NQ Ref 0633 Version 5 Page 1 of 7 National Certificate in Business Administration and Computing (Level 3) Level 3 Credits 60 This qualification has been reviewed. The last date to meet the requirements

More information

National Certificate in Engineering and Technology (Glass Containers) (Level 4)

National Certificate in Engineering and Technology (Glass Containers) (Level 4) NZQF NQ Ref 0949 Version 4 Page 1 of 7 National Certificate in Engineering and Technology (Glass Containers) (Level 4) Level 4 Credits 62 This qualification has been reviewed. The last date to meet the

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. NZQF NQ Ref 0767 Version 5 Page 1 of 11 National Certificate in Telecommunications (Level 3) with strands in Bearer and Switch, Building and Data Cabling, Customer Access Network, Customer Premises Equipment,

More information

National Certificate in Contact Centre Operations (Level 3)

National Certificate in Contact Centre Operations (Level 3) NZQF NQ Ref 0643 Version 6 Page 1 of 8 National Certificate in Contact Centre Operations (Level 3) Level 3 Credits 58 This qualification is expiring. The last date to meet the requirements is 31 December

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. NZQF NQ Ref 0634 Version 5 Page 1 of 7 National Certificate in Business Administration (Level 4) Level 4 Credits 60 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

National Certificate in Occupational Health and Safety (Workplace Safety) (Level 3)

National Certificate in Occupational Health and Safety (Workplace Safety) (Level 3) 0801 Version 6 Page 1 of 6 National Certificate in Occupational Health and Safety (Workplace Safety) (Level 3) Level 3 Credits 50 Purpose This qualification is designed to accommodate the needs of a wide

More information

National Certificate in Business (First Line Management) (Level 4) Level 4

National Certificate in Business (First Line Management) (Level 4) Level 4 NZQF NQ Ref 0649 Version 7 Page 1 of 7 National Certificate in Business (First Line ) (Level 4) Level 4 Credits 45 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

National Certificate in Community and Workplace Fire and Emergency Management (Level 2)

National Certificate in Community and Workplace Fire and Emergency Management (Level 2) NZQF NQ Ref 0910 Version 3 Page 1 of 7 National Certificate in Community and Workplace Fire and Emergency Management (Level 2) Level 2 Credits 44 This qualification has been reviewed. The last date to

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2021.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2021. NZQF NQ Ref 0951 Version 7 Page 1 of 9 National Certificate in Electrical Engineering (Advanced Trade) (Level 5) with strands in Electrotechnology Specialisation, Electrical Installation, and Industrial

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2020.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2020. NZQF NQ Ref 1123 Version 3 Page 1 of 9 National Certificate in Electronic (Level 4) Level 4 Credits 101 This qualification has been reviewed. The last date to meet the requirements is 31 December 2020.

More information

53 (or 59-65 depending on optional strand)

53 (or 59-65 depending on optional strand) NZQF NQ Ref 1107 Version 3 Page 1 of 7 National Certificate in Carpet and Textile Cleaning with optional strands in Carpet Colour Restoration, Restoring Water Affected Carpet, and Establishing a Carpet

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. NZQF NQ Ref 0370 Version 7 Page 1 of 6 National Diploma in Business Administration (Level 5) Level 5 Credits 120 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

National Certificate in Food and Related Products Processing (Level 3)

National Certificate in Food and Related Products Processing (Level 3) NZQF NQ Ref 0343 Version 7 Page 1 of 8 National Certificate in Food and Related Products Processing (Level 3) Level 3 Credits 59 This qualification has been reviewed. The last date to meet the requirements

More information

National Certificate in Materials Management (Level 3) Level 3. Credits 60. Purpose

National Certificate in Materials Management (Level 3) Level 3. Credits 60. Purpose NQF Ref 0712 Version 3 Page 1 of 7 National Certificate in Materials Management (Level 3) Level 3 Credits 60 Purpose The National Certificate in Materials Management (Level 3) [Ref: 0712] is the basic

More information

National Certificate in Business (Small Business Management) Level 4

National Certificate in Business (Small Business Management) Level 4 NZQF NQ Ref 0172 Version 3 Page 1 of 7 National Certificate in Business (Small Business ) Level 4 Credits 60 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. NZQF NQ Ref 0993 Version 7 Page 1 of 6 National Certificate in Retail (Level 2) Level 2 Credits 42 This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. Transition

More information

National Certificate in Electrical Engineering (Electrical Appliance and Electronic Servicing) (Level 3)

National Certificate in Electrical Engineering (Electrical Appliance and Electronic Servicing) (Level 3) NQF Ref 1265 Version 3 Page 1 of 8 National Certificate in Electrical Engineering (Electrical Appliance and Electronic Servicing) (Level 3) Level 3 Credits 80 This qualification has been reviewed. The

More information

National Certificate in Electricity Supply (Level 2) with optional strands in Electrical, Electrical Fitter, and Line Mechanic

National Certificate in Electricity Supply (Level 2) with optional strands in Electrical, Electrical Fitter, and Line Mechanic NZQF NQ Ref 1293 Version 5 Page 1 of 9 National Certificate in Electricity Supply (Level 2) with optional strands in Electrical, Electrical Fitter, and Line Mechanic Level 2 Credits 50 This qualification

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. NZQF NQ Ref 1689 Version 2 Page 1 of 6 National Certificate in Retail (Level 3) Level 3 Credits 60 This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. Transition

More information

National Diploma in Hospitality (Business Management) (Level 5) Level 5

National Diploma in Hospitality (Business Management) (Level 5) Level 5 NZQF NQ Ref 0883 Version 4 Page 1 of 7 National Diploma in Hospitality (Business ) (Level 5) Level 5 Credits 120 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

National Certificate in Agribusiness Management (Business Planning and Financial Management) Level 5

National Certificate in Agribusiness Management (Business Planning and Financial Management) Level 5 NZQF NQ Ref 1186 Version 2 Page 1 of 6 National Certificate in Agribusiness Management (Business Planning and Financial Management) Level 5 Credits 70 This qualification has been reviewed. The last date

More information

National Certificate in Plaster Board (Level 4) with strands in Fixing, and Finishing, and with an optional strand in Specialist

National Certificate in Plaster Board (Level 4) with strands in Fixing, and Finishing, and with an optional strand in Specialist NZQF NQ Ref 0275 Version 7 Page 1 of 9 National Certificate in Plaster Board (Level 4) with strands in Fixing, and Finishing, and with an optional strand in Specialist Level 4 Credits 94-99 This qualification

More information

National Certificate in Electronic Security (Systems Installation) (Level 3)

National Certificate in Electronic Security (Systems Installation) (Level 3) NZQF NQ Ref 1632 Version 1 Page 1 of 7 National Certificate in Electronic Security (Systems Installation) (Level 3) Level 3 Credits 117 Purpose This is the basic qualification for people wishing to pursue

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2021.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2021. NQF Ref 0223 Version 6 Page 1 of 8 National Certificate in Electrical Engineering (Level 3) Level 3 Credits 149 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2019.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2019. NZQF NQ Ref 0678 Version 5 Page 1 of 9 National Certificate in Offender Management (Level 3) Level 3 Credits 107 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2016.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2016. NZQF NQ Ref 0444 Version 6 Page 1 of 7 National Certificate in Sport (Coaching) (Level 4) Level 4 Credits 94 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

National Certificate in Public Sector Services (Client/Customer Service) (Level 3)

National Certificate in Public Sector Services (Client/Customer Service) (Level 3) NZQF NQ Ref 0659 Version 5 Page 1 of 8 National Certificate in Public Sector Services (Client/Customer Service) (Level 3) Level 3 Credits 50 Purpose Client/customer service is key to successful business

More information

National Certificate in Community Support Services (Residential) (Level 3)

National Certificate in Community Support Services (Residential) (Level 3) NZQF NQ Ref 1391 Version 4 Page 1 of 8 National Certificate in Community Support Services (Residential) (Level 3) Level 3 Credits 56 This qualification has been reviewed. The last date to meet the requirements

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2020.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2020. NZQF NQ Ref 1133 Version 4 Page 1 of 13 National Diploma in Aeronautical with strands in Aeroplane, Rotorcraft, Powerplant Piston, Powerplant Turbine, Electrical, Instrument, and Radio Level 6 Credits

More information

National Certificate in Fire Detection and Alarm Systems (Testing) (Level 3)

National Certificate in Fire Detection and Alarm Systems (Testing) (Level 3) NQF Ref 0862 Version 3 Page 1 of 7 National Certificate in Fire Detection and Alarm Systems (Testing) (Level 3) Level 3 Credits 107 Purpose This qualification is for people in the fire protection industry,

More information

National Certificate in General Contracting (Training and Assessment)

National Certificate in General Contracting (Training and Assessment) NZQF NQ Ref 1061 Version 3 Page 1 of 5 National Certificate in General Contracting (Training and Assessment) Level 4 Credits 50 This qualification is expiring. The last date to meet the requirements is

More information

National Certificate in Heating, Ventilating, and Air Conditioning (Mechanical Services) (Level 4) Level 4

National Certificate in Heating, Ventilating, and Air Conditioning (Mechanical Services) (Level 4) Level 4 NZQF NQ Ref 0124 Version 6 Page 1 of 12 National Certificate in Heating, Ventilating, and Air Conditioning (Mechanical Services) (Level 4) Level 4 Credits 254 This qualification has been reviewed. The

More information

National Certificate in Health, Disability, and Aged Support (Core Competencies) (Level 3)

National Certificate in Health, Disability, and Aged Support (Core Competencies) (Level 3) NZQF NQ Ref 1327 Version 7 Page 1 of 9 National Certificate in Health, Disability, and Aged Support (Core Competencies) (Level 3) Level 3 Credits 57 This qualification has been reviewed. The last date

More information

National Certificate in Dairy Farming (Artificial Insemination) with strands in Site Technician, and Industry Technician

National Certificate in Dairy Farming (Artificial Insemination) with strands in Site Technician, and Industry Technician NZQF NQ Ref 0967 Version 6 Page 1 of 6 National Certificate in Dairy Farming (Artificial Insemination) with strands in Site Technician, and Industry Technician Level 2 or 4 Credits 43 or 53 This qualification

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2016.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2016. NZQF NQ Ref 0373 Version 5 Page 1 of 8 National Certificate in Motor Industry (Tyre Servicing) with optional strands in Light and Heavy Commercial Vehicle Tyres, Agricultural Equipment Tyres, Off-The-Road

More information

National Certificate in Motor Industry (Automotive Parts and Accessories Merchandising)

National Certificate in Motor Industry (Automotive Parts and Accessories Merchandising) NZQF NQ Ref 0099 Version 5 Page 1 of 9 National Certificate in Motor Industry (Automotive Parts and Accessories Merchandising) Level 3 Credits 99 This qualification has been reviewed. The last date to

More information

National Certificate in Freight Forwarding (Intermediate)

National Certificate in Freight Forwarding (Intermediate) NZQF NQ Ref 1684 Version 2 Page 1 of 8 National Certificate in Freight Forwarding (Intermediate) Level 3 Credits 64 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

National Certificate in Security (Communications) (Level 3)

National Certificate in Security (Communications) (Level 3) NQF Ref 0560 Version 3 Page 1 of 5 National Certificate in Security (Communications) (Level 3) Level 3 Credits 60 Purpose This certificate provides a nationally recognised qualification for those working

More information

National Certificate in Surveying (Hydrographic Surveying) (Level 4) Level 4

National Certificate in Surveying (Hydrographic Surveying) (Level 4) Level 4 NZQF NQ Ref 1444 Version 3 Page 1 of 8 National Certificate in Surveying (Hydrographic Surveying) (Level 4) Level 4 Credits 131 This qualification has been reviewed. The last date to meet the requirements

More information

National Certificate in Work and Community Skills (Supported Learning)

National Certificate in Work and Community Skills (Supported Learning) NZQF NQ Ref 0853 Version 4 Page 1 of 5 National Certificate in Work and Community Skills (Supported Learning) Level 1 Credits 40 This qualification has been reviewed. The last date to meet the requirements

More information

National Certificate in Electrical Engineering (Electrician for Registration) (Level 4)

National Certificate in Electrical Engineering (Electrician for Registration) (Level 4) NZQF NQ Ref 1195 Version 3 Page 1 of 11 National Certificate in Electrical Engineering (Electrician for Registration) (Level 4) Level 4 Credits 249 This qualification has been reviewed. The last date to

More information

National Certificate in Electricity Supply (Network Operator) (Level 4)

National Certificate in Electricity Supply (Network Operator) (Level 4) NQF Ref 0892 Version 3 Page 1 of 5 National Certificate in Electricity Supply (Network Operator) (Level 4) Level 4 Credits 88 Purpose This national certificate is awarded to people who have demonstrated

More information

National Certificate in Heating, Ventilating, and Air Conditioning (Mechanical Services) (Level 5)

National Certificate in Heating, Ventilating, and Air Conditioning (Mechanical Services) (Level 5) NQF Ref 0897 Version 3 Page 1 of 8 National Certificate in Heating, Ventilating, and Air Conditioning (Mechanical Services) (Level 5) Level 5 Credits 100 This qualification is expiring. The last date to

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2020.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2020. NZQF NQ Ref 0590 Version 5 Page 1 of 8 National Certificate in Baking (Craft Baking) (Level 4) Level 4 Credits 287 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

National Certificate in Hospitality (Restaurant Service) (Level 4)

National Certificate in Hospitality (Restaurant Service) (Level 4) NZQF NQ Ref 1557 Version 2 Page 1 of 5 National Certificate in Hospitality (Restaurant Service) (Level 4) Level 4 Credits 58 This qualification has been reviewed. The last date to meet the requirements

More information

National Certificate in Mechanical Engineering Technology (Level 1) Level 1

National Certificate in Mechanical Engineering Technology (Level 1) Level 1 NZQF NQ Ref 1263 Version 2 Page 1 of 5 National Certificate in Mechanical Engineering Technology (Level 1) Level 1 Credits 40 This qualification has been reviewed. The last date to meet the requirements

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2017.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2017. NZQF NQ Ref 0469 Version 5 Page 1 of 7 National Certificate in Pharmacy (Assistant) (Level 3) Level 3 Credits 88 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

National Certificate in Fire Protection Systems Technology (Inspection and Testing) (Level 4)

National Certificate in Fire Protection Systems Technology (Inspection and Testing) (Level 4) NQF Ref 0864 Version 2 Page 1 of 8 National Certificate in Fire Protection Systems Technology (Inspection and Testing) (Level 4) Level 4 Credits 202 Purpose This qualification is for technicians in the

More information

National Certificate in Motor Industry (Automotive Air Conditioning)

National Certificate in Motor Industry (Automotive Air Conditioning) NZQF NQ Ref 0002 Version 6 Page 1 of 8 National Certificate in Motor Industry (Automotive Air Conditioning) Level 4 Credits 131 This qualification is expiring. The last date to meet the requirements is

More information

National Diploma in Surveying (Level 6) with an optional strand in Mine Surveying Level 6

National Diploma in Surveying (Level 6) with an optional strand in Mine Surveying Level 6 NZQF Ref 0453 Version 7 Page 1 of 17 National Diploma in Surveying (Level 6) with an optional strand in Mine Surveying Level 6 Credits 250 This qualification has been reviewed. The last date to meet the

More information

National Certificate in Motor Industry (Automotive Service Reception)

National Certificate in Motor Industry (Automotive Service Reception) NQF Ref 0676 Version 2 Page 1 of 6 National Certificate in Motor Industry (Automotive Service Reception) Level 2 Credits 66 This qualification is expiring. The last date to meet the requirements is 31

More information

National Certificate in Commercial Road Transport (Courier Driver) with strands in Urgent Operations, and Non-urgent Operations

National Certificate in Commercial Road Transport (Courier Driver) with strands in Urgent Operations, and Non-urgent Operations NZQF NQ Ref 1084 Version 4 Page 1 of 8 National Certificate in Commercial Road Transport (Courier Driver) with strands in Urgent Operations, and Non-urgent Operations Level 2 Credits 45 Purpose This qualification

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. NZQF NQ Ref 1650 Version 2 Page 1 of 5 National Certificate in Sales (Level 4) Level 4 Credits 76 This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. Transition

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2020.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2020. NZQF NQ Ref 0326 Version 6 Page 1 of 6 National Diploma in Journalism (Multi-media) (Level 5) Level 5 Credits 120 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

National Diploma in Social Services (Level 6) Level 6. Credits 180. Purpose. Replacement Information

National Diploma in Social Services (Level 6) Level 6. Credits 180. Purpose. Replacement Information NZQF NQ Ref 1652 Version 1 Page 1 of 8 National Diploma in Social Services (Level 6) Level 6 Credits 180 Purpose The National Diploma in Social Services (Level 6) [Ref: 1652] leads on from the National

More information

National Diploma in Construction Management (Level 6)

National Diploma in Construction Management (Level 6) NZQF NQ Ref 0356 Version 6 Page 1 of 7 National Diploma in Construction Management (Level 6) Level 6 Credits 245 This qualification has been reviewed. The last date to meet the requirements is 31 December

More information

National Certificate in Pharmacy (Technician) (Level 5) with strands in Community, and Hospital Level 5

National Certificate in Pharmacy (Technician) (Level 5) with strands in Community, and Hospital Level 5 NZQF NQ Ref 0423 Version 7 Page 1 of 8 National Certificate in Pharmacy (Technician) (Level 5) with strands in Community, and Hospital Level 5 Credits 131 or 139 This qualification has been reviewed. The

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2019.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2019. NZQF NQ Ref 1267 Version 3 Page 1 of 8 National Certificate in Baking (Instore/Franchise) (Level 4) Level 4 Credits 210 This qualification has been reviewed. The last date to meet the requirements is 31

More information

National Certificate in Motor Industry (Diesel Fuel Injection Engineering)

National Certificate in Motor Industry (Diesel Fuel Injection Engineering) NZQF NQ Ref 0139 Version 7 Page 1 of 11 National Certificate in Motor Industry (Diesel Fuel Injection Engineering) Level 4 Credits 214 This qualification has been reviewed. The last date to meet the requirements

More information

Level 4. Credits Purpose

Level 4. Credits Purpose NQF Ref 0375 Version 4 Page 1 of 11 National Certificate in Roofing (Installer) with strands in Concrete Roof Tiles, Metal Roofing and Wall Cladding, Metal Roof Tiles, Roof Membrane, Liquid Roof Membrane,

More information

National Certificate in Early Childhood Education and Care (Level 3)

National Certificate in Early Childhood Education and Care (Level 3) NZQF NQ Ref 0403 Version 4 Page 1 of 6 National Certificate in Early Childhood Education and Care (Level 3) Level 3 Credits 63 Purpose The National Certificate in Early Childhood Education and Care (Level

More information

National Graduate Diploma in Electricity Supply (High Voltage Line Construction and Maintenance) (Level 7)

National Graduate Diploma in Electricity Supply (High Voltage Line Construction and Maintenance) (Level 7) 1618 Version 1 Page 1 of 6 National Graduate Diploma in Electricity Supply (High Voltage Line Construction and Maintenance) (Level 7) Level 7 Credits 210 Purpose This graduate diploma is for engineering

More information

National Certificate in Signmaking with strands in Computer Graphics, Hand Lettering, and Electric Signmaking 3 or 4 depending on strand

National Certificate in Signmaking with strands in Computer Graphics, Hand Lettering, and Electric Signmaking 3 or 4 depending on strand NZQF NQ Ref 0306 Version 3 Page 1 of 10 National Certificate in Signmaking with strands in Computer Graphics, Hand Lettering, and Electric Signmaking Level 3 or 4 depending on strand Credits 214, 288,

More information

National Certificate in Early Childhood Education and Care (Level 5)

National Certificate in Early Childhood Education and Care (Level 5) NZQF NQ Ref 0430 Version 5 Page 1 of 7 National Certificate in Early Childhood Education and Care (Level 5) Level 5 Credits 122 Purpose The National Certificate in Early Childhood Education and Care (Level

More information

This qualification is expiring. The last date to meet the requirements is 30 June 2013.

This qualification is expiring. The last date to meet the requirements is 30 June 2013. NZQF NQ Ref 0783 Version 4 Page 1 of 13 National Diploma in (Level 5) Level 5 Credits 120 This qualification is expiring. The last date to meet the requirements is 30 June 2013. Purpose This qualification

More information

National Certificate in Ambulance (Patient Care and Transport) (Level 4)

National Certificate in Ambulance (Patient Care and Transport) (Level 4) NQF Ref 0206 Version 6 Page 1 of 7 National Certificate in Ambulance (Patient Care and Transport) (Level 4) Level 4 Credits 120 This qualification is expiring. The last date to meet the requirements is

More information

National Certificate in Business Administration and Computing (Level 3)

National Certificate in Business Administration and Computing (Level 3) NQF Ref 0633 Version 3 Page 1 of 6 National Certificate in Business Administration and Computing (Level 3) Level 3 Credits 60 Purpose This national certificate is designed to: recognise a broad range of

More information

This qualification is expiring. The last date to meet the requirements is 31 December 2010.

This qualification is expiring. The last date to meet the requirements is 31 December 2010. NZQF NQ Ref 0389 Version 3 Page 1 of 12 National in Joinery (Aluminium Fabrication) Level 3 Credits 96 This qualification is expiring. The last date to meet the requirements is 31 December 2010. Purpose

More information

National Certificate in Adult Education and Training (Level 5) with strands in New Zealand Environment, and International Environment

National Certificate in Adult Education and Training (Level 5) with strands in New Zealand Environment, and International Environment NQF Ref 0379 Version 3 Page 1 of 6 National Certificate in (Level 5) with strands in New Zealand Environment, and International Environment Level 5 Credits 59-60 Purpose The National Certificate in (Level

More information

National Certificate in Casino Surveillance (Supervisor) (Level 5)

National Certificate in Casino Surveillance (Supervisor) (Level 5) NQF Ref 0407 Version 2 Page 1 of 6 National Certificate in Casino Surveillance (Supervisor) (Level 5) Level 5 Credits 80 Purpose The National Certificate in Casino Surveillance (Supervisor) (Level 5) [Ref:

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. NZQF NQ Ref 1572 Version 3 Page 1 of 10 National Certificate in Wood Fibre Manufacturing (Pulp and Paper) (Level 3) with strands in Mechanical Pulping, Pulp and Paper Dry End, and Pulp and Paper Wet End

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2022.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2022. NZQF NQ Ref 0202 Version 5 Page 1 of 9 National Certificate in Plumbing Level 4 Credits 219 This qualification has been reviewed. The last date to meet the requirements is 31 December 2022. Transition

More information

National Certificate in Fire Detection and Alarm Systems (Level 4)

National Certificate in Fire Detection and Alarm Systems (Level 4) NQF Ref 0569 Version 4 Page 1 of 8 National Certificate in Fire Detection and Alarm Systems (Level 4) Level 4 Credits 217 Purpose This qualification is for technicians in the fire protection industry,

More information

National Diploma in Electricity Supply (Level 6) Level 6. Credits 120. Purpose. Credit Range

National Diploma in Electricity Supply (Level 6) Level 6. Credits 120. Purpose. Credit Range NQF Ref 0675 Version 4 Page 1 of 5 National Diploma in Electricity Supply (Level 6) Level 6 Credits 120 Purpose This diploma is for people working in the electricity supply industry and provides the rules

More information

National Certificate in Motor Industry (Automotive Engineering)

National Certificate in Motor Industry (Automotive Engineering) NZQF NQ Ref 0019 Version 6 Page 1 of 9 National Certificate in Motor Industry (Automotive Engineering) Level 4 Credits 271 This qualification has been reviewed. The last date to meet the requirements is

More information

National Certificate in Beauty Services (Cosmetology) (Level 3)

National Certificate in Beauty Services (Cosmetology) (Level 3) NQF Ref 0631 Version 3 Page 1 of 6 National Certificate in Beauty Services (Cosmetology) (Level 3) Level 3 Credits 52 Purpose The National Certificate in Beauty Services (Cosmetology) (Level 3) is awarded

More information

National Certificate in Motor Industry (Advanced Technical) (Level 5) with strands in Automotive Electrical and Mechanical, and Collision Repair

National Certificate in Motor Industry (Advanced Technical) (Level 5) with strands in Automotive Electrical and Mechanical, and Collision Repair NZQF NQ Ref 1143 Version 1 Page 1 of 13 National Certificate in Motor Industry (Advanced Technical) (Level 5) with strands in Automotive Electrical and Mechanical, and Collision Repair Level 5 Credits

More information

National Certificate in Motor Industry (Trailer Boat Systems Engineering) (Level 4)

National Certificate in Motor Industry (Trailer Boat Systems Engineering) (Level 4) NZQF NQ Ref 0699 Version 3 Page 1 of 9 National Certificate in Motor Industry (Trailer Boat Systems Engineering) (Level 4) Level 4 Credits 91 This qualification has been reviewed. The last date to meet

More information

National Certificate in Refrigeration and Air Conditioning (Level 4)

National Certificate in Refrigeration and Air Conditioning (Level 4) NZQF NQ Ref 0130 Version 5 Page 1 of 11 National Certificate in Refrigeration and Air Conditioning (Level 4) Level 4 Credits 284 This qualification has been reviewed. The last date to meet the requirements

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. NZQF NQ Ref 1498 Version 2 Page 1 of 18 National Diploma in Business (Level 5) with optional strands in Accounting, Finance, Finance - Māori, Health and Safety, Human Resource, Māori Business and, Marketing,

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. NZQF NQ Ref 1677 Version 2 Page 1 of 12 National Certificate in Health, Disability, and Aged Support (Health Assistants) (Level 3) with strands in Dietician Assistance, Dental Assistance, Healthcare Assistance,

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. NZQF Ref 1499 Version 3 Page 1 of 14 National Diploma in Business (Level 6) Level 6 Credits 120 This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. Transition

More information