TABLE OF CONTENTS. Page 2. The Puck CSI Xtreme LED PAR Can Getting Started Meet The Puck CSI Xtreme LED PAR Can 5. 3.

Size: px
Start display at page:

Download "TABLE OF CONTENTS. Page 2. The Puck CSI Xtreme LED PAR Can 1. 1. Getting Started 3. 2. Meet The Puck CSI Xtreme LED PAR Can 5. 3."

Transcription

1 Blizzard Lighting, LLC Waukesha, WI USA Copyright (c) 2013

2 TABLE OF CONTENTS The Puck CSI Xtreme LED PAR Can 1 1. Getting Started 3 What s In The Box? 3 Getting It Out Of The Box 3 Powering Up! 3 Getting A Hold Of Us 3 Safety Instructions (Don t Stick Your Hand In The Toaster!) 4 2. Meet The Puck CSI Xtreme LED PAR Can 5 Features 5 DMX Quick Reference 5 The Puck CSI Xtreme Pin-up Picture 6 3. Setup 7 Fuse Replacement 7 Connecting A Bunch Of Puck CSI Xtreme LED PAR Cans 7 Data/DMX Cables 7 Cable Connectors 8 3-Pin??? 5-Pin??? Huh? 8 Take It To The Next Level: Setting up DMX Control 8 Fixture Linking (Master/Slave Mode) 9 Mounting/Rigging 9 Using this fixture with the wicicle Wireless DMX System Operating Adjustments 12 Control Panel 12 Control Panel Menu Structure 12 DMX Mode 13 Master/Slave Mode 13 Sound Active Mode 13 Fade Mode 13 Jump Mode 13 Set Custom Intensity Levels Appendix 14 Keeping The Puck CSI Xtreme As Good As New 14 Returns (Gasp!) 14 Shipping Issues 14 Tech Specs 15 Troubleshooting 15 Page 2

3 1. GETTING STARTED What s In The Box? 1 x Puck CSI Xtreme UV LED PAR Fixture 1x IEC Power Cord This Lovely User Manual Getting It Out Of The Box Congratulations, aspiring crime fighter and/or psychedelic music aficionado! Now that you ve got The Puck CSI Xtreme (or hopefully, Xtreme s!), you should carefully unpack the box and check the contents to ensure that all parts are present and in good condition. If anything looks as if it has been damaged in transit, notify the shipper immediately and keep the packing material for inspection. Again, please save the carton and all packing materials. If a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Powering Up! All fixtures must be powered directly off a switched circuit and cannot be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used solely for a 0% to 100% switch. AC Voltage Switch - Not all fixtures have a voltage select switch, so please verify that the fixture you receive is suitable for your local power supply. See the label on the fixture or refer to the fixture s specifications chart for more information. A fixture s listed current rating is its average current draw under normal conditions. Check the fixture or device carefully to make sure that if a voltage selection switch exists that it is set to the correct line voltage you will use. Warning! Verify that the voltage select switch on your unit matches the line voltage applied. Damage to your fixture may result if the line voltage applied does not match the voltage indicated on the voltage selector switch. All fixtures must be connected to circuits with a suitable Ground (Earthing). Getting A Hold Of Us If something is wrong, just give us a call or send an . We ll be happy to help, honest. Blizzard Lighting N16 W23390 Stoneridge Dr. Suite E Waukesha, WI USA support@blizzardlighting.com Disclaimer: The information and specifications contained in this document are subject to change without notice. Blizzard Lighting assumes no responsibility or liability for any errors or omissions that may appear in this user manual. Blizzard Lighting reserves the right to update the existing document or to create a new document to correct any errors or omissions at any time. You can download the latest version of this document from www. blizzardlighting.com. Author: Date: Last Edited: Date: J. Thomas 6/13/2013 J. Thomas 6/14/2013 Page 3

4 SAFETY INSTRUCTIONS Please keep this User Guide for future use. If you sell the unit to someone else, be sure that they also receive this User Guide. ALWAYS make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture. This product is intended for indoor use only. To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable materials close to the unit while operating. The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent surfaces. Be sure that no ventilation slots are blocked. ALWAYS disconnect from the power source before servicing or replacing fuse and be sure to replace with same fuse size and type. ALWAYS secure fixture using a safety chain. NEVER carry the fixture by its cord. Use its carrying handles. DO NOT operate at ambient temperatures higher than 104 F (40 C). In the event of a serious operating problem, stop using the unit immediately. NEVER try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. Always use the same type spare parts. NEVER connect the device to a dimmer pack. Make sure the power cord is never crimped or damaged. Never disconnect the power cord by pulling or tugging on the cord. Avoid direct eye exposure to the light source while it is on. Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact Blizzard Lighting at support@blizzardlighting.com. Page 4

5 2. MEET The Puck CSI Xtreme Flat PAR Can CONTROL FEATURES High output UV via 36x 3w nm UV LEDs Full on UV LED intensity + 4 separate LED pixel patterns Variable electronic strobe Variable electronic dimmer Built-in automated programs via DMX and master/slave Built-in sound active programs ADDITIONAL FEATURES Lightweight and compact (It kept its New Years resolution!) 4-Button LED control panel for easy programming Dual bracket for flexibility in mounting Power outlet for fixture linking DMX Quick Reference (8-Channel Mode) Channel Channel Value What It Does <-> 255 Master Dimmer (0% <--> 100%) <-> 255 Pattern 1 Intensity (0% <--> 100%) <-> 255 Pattern 2 Intensity (0% <--> 100%) <-> 255 Pattern 3 Intensity (0% <--> 100%) <-> 255 Pattern 4 Intensity (0% <--> 100%) <-> 255 Strobe (slow <--> fast) <-> 255 Speed (slow <--> fast) <-> <-> <-> <-> <-> <-> <-> 255 Enable Auto (Ch. 7 controls speed) Strobe Auto Color Fade Mode Jump Mode Built-in Programs Sound Active Mode DMX Quick Reference (4-Channel Mode) Channel Channel Value What It Does <-> 255 Pattern 1 Intensity (0% <--> 100%) <-> 255 Pattern 2 Intensity (0% <--> 100%) <-> 255 Pattern 3 Intensity (0% <--> 100%) <-> 255 Pattern 4 Intensity (0% <--> 100%) Page 5

6 Figure 1: The Puck CSI Pin-Up Picture Dual Mounting Yokes 36x 3-watt UV LEDs Ridiculously Thin! Figure 2: The Rear Connections DMX In DMX Out LED Control Panel Microphone AC Power In/Out Page 6

7 3. SETUP Fuse Replacement With a flat head screwdriver, wedge the fuse holder out of its housing. Remove the damaged fuse from its holder and replace with exact same type fuse. Insert the fuse holder back in its place and reconnect power. Connecting A Bunch of Puck CSI Xtreme Flat LED PAR Cans You will need a serial data link to run light shows using a DMX-512 controller or to run shows on two or more fixtures set to sync in master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support. Fixtures on a serial data link must be daisy chained in one single line. Also, connecting more than 32 fixtures on one serial data link without the use of a DMX optically-isolated splitter may result in deterioration of the digital DMX signal. The maximum recommended cable-run distance is 500 meters (1640 ft). The maximum recommended number of fixtures on a serial data link is 32 fixtures. Data/DMX Cabling To link fixtures together you ll need data cables. You should use datagrade cables that can carry a high quality signal and are less prone to electromagnetic interference. For instance, Belden 9841 meets the specifications for EIA RS-485 applications. Standard microphone cables will probably be OK, but note that they cannot transmit DMX data as reliably over long distances. In any event, the cable should have the following characteristics: 2-conductor twisted pair plus a shield Maximum capacitance between conductors 30 pf/ft. Maximum capacitance between conductor & shield 55 pf/ft. Maximum resistance of 20 ohms / 1000 ft. Nominal impedance ohms Page 7

8 Cable Connectors Cables must have a male XLR connector on one end and a female XLR connector on the other end. (Duh!) CAUTION: Do not allow contact between the common and the fixture s chassis ground. Grounding the common can cause a ground loop, and your fixture may perform erratically. Test cables with an ohm meter to verify correct polarity and to make sure the pins are not grounded or shorted to the shield or each other. 3-Pin??? 5-Pin??? Huh?!? If you use a controller with a 5 pin DMX output connector, you will need to use a 5 pin to 3 pin adapter. They are widely available over the internet and from specialty retailers If you d like to build your own, the chart below details a proper cable conversion: Conductor 3-Pin Female (Output) 5-Pin Male (Input) Ground/Shield Pin 1 Pin 1 DMX Data (-) Pin 2 Pin 2 DMX Data (+) Pin 3 Pin 3 Not Used. No Connection. No Connection. Not Used. No Connection. No Connection. Take It To The Next Level: Setting Up DMX Control Step 1: Connect the male connector of the DMX cable to the female connector (output) on the controller. Step 2: Connect the female connector of the DMX cable to the first fixture s male connector (input). Note: It doesn t matter which fixture address is the first one connected. We recommend connecting the fixtures in terms of their proximity to the controller, rather than connecting the lowest fixture number first, and so on. Step 3: Connect other fixtures in the chain from output to input as above. Place a DMX terminator on the output of the final fixture to ensure best communication. Page 8

9 Fixture Linking (Master/Slave Mode) 1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the first fixture. 2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the input connector of the next fixture consisting of a (male) 3 pin connector. Then, proceed to connect from the output as stated above to the input of the following fixture and so on. A quick note: Often, the setup for Master- Slave and Standalone operation requires that the first fixture in the chain be initialized for this purpose via either settings in the control panel or DIP-switches. Secondarily, the fixtures that follow may also require a slave setting. Check the Operating Adjustments section in this manual for complete instructions for this type of setup and configuration. Mounting & Rigging This fixture may be mounted in any SAFE position provided there is enough room for ventilation. It is important never to obstruct the fan or vents pathway. Mount the fixture using a suitable C or O type clamp. The clamp should be rated to hold at least 10x the fixture s weight to ensure structural stability. Do not mount to surfaces with unknown strength, and ensure properly rated rigging is used when mounting fixutres overhead. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding the desired position, retighten both knobs. When selecting installation location, take into consideration lamp replacement access (if applicable) and routine maintenance. Safety cables MUST ALWAYS be used. Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation. Page 9

10 USING THIS FIXTURE WITH THE wicicle WIRELESS DMX SYSTEM In addition to the unbridled thrill you already received the first time you plugged in your fixture, you ll be delighted to know that This fixture also works seamlessly with our wicicle Wireless DMX system, without additional power. ONLY fixtures bearing this logo are certified for use with the wicicle without external power. Unauthorized modification and/or using the wicicle with unapproved fixtures may cause damage to the wicicle or fixture. UNDER NO CIRCUMSTANCES IS BLIZZARD LIGHTING RESPONSIBLE FOR ANY DAMAGE FROM SUCH OPERATION. Fixtures bearing the above logo MUST only use cable and connectors which separate chassis/case ground from cable shielding. Cabling with the shield connected to the connector s case/chassis may cause malfunction and damage to the wicicle or fixture. wicicle transmitters have additional power requirements and therefore cannot be powered directly from the fixture. You will need to utilize the supplied AC/DC adaptor to drive wicicle transmitters in your system. WE HAD THIS SPACE, SO WE FIGURED WE D DRAW YOU A PICTURE: Antenna Housing & 1/2-wave Antenna Antenna ferrule & articulation joint Stainless Steel Housing Recessed Selector Button Status LED 3-Pin XLR Connector (Male on transmitter, Female on receiver model) Page 10

11 Each wicicle acts as both a transmitter and a receiver, depending on whether a DMX source is applied to the integral XLR connector. This is an extremely powerful feature of the system, however, it also requires 1 piece of due dilligence, and that is the removal of extraneous DMX signals from your lighting rig BEFORE proceeding. SO: BEFORE DOING ANYTHING ELSE, YOU SHOULD DISABLE ANY BUILT-IN PROGRAMS IN THE FIXTURES YOU WISH TO CONNECT AND/ OR SET THEM AS SLAVES PRIOR TO RETURNING THEM TO DMX MODE (IF APPLICABLE). Most fixtures contain a built-in automatic, sound active or custom program which is designed to operate with the fixture NOT connected to a DMX chain. Some of these programs will automatically run unless the fixture is set to slave mode. These fixtures typically sense DMX automatically and switch to DMX mode upon receiving DMX signal (our Pucks do that!) If you plug a wicicle receiver into an autosensing fixture set as a master, chances are good that the wicicle receiver will begin transmitting the master program. Most times, this is undesirable, and taking the two seconds to switch these programs off will solve a lot of ails. Got that done? Good! Then let s proceed! 1. Plug the wicicle Receiver into the DMX IN connector of the fixture and verify it is receiving power (the STATUS LED should illuminate.) 2. Connect the AC/DC adaptor to the wicicle Transmitter and verify it is receiving power (the STATUS LED should illuminate.) 3. Press the RECESSED SELECTOR BUTTON on the Transmitter to select the operating channel group. (The system will store this setting for future use) The 7-Color Status LED will change color to indicate the current channel group: GROUP 1: RED GROUP 2: GREEN GROUP 3: YELLOW GROUP 4: BLUE GROUP 5: VIOLET GROUP 6: CYAN GROUP 7: WHITE NOTE: GROUP number also corresponds to the GROUP setting on our LightCaster wireless DMX Transceiver. 4. Follow the same procedure on the Receiver to select the channel group. 5. Once both the transmitter and receiver(s) are both set to the same channel group, connect the transmitter to the DMX controller or the DMX out of a fixture on your DMX chain. 6. Once a DMX signal is provided to the transmitter, the status LED will blink RED slowly until communication is established with the receiver. The status LED on the receiver(s) will flash GREEN slowly until communication is established. 7. Once the clearest channel is auto-selected, the status LEDs will blink quickly on both the transmitter and receiver. NOTE: The color of the LED DURING operation does not indicate channel group, instead it indicates whether the unit is transmitting or receiving. That s It! Page 11

12 4. OPERATING ADJUSTMENTS The Control Panel All the goodies and different modes possible with the Puck CSI Xtreme are accessed by using the control panel on the rear of the fixture. There are 4 control buttons below the LED display which allow you to navigate through the various control panel menus. <MENU> Is used to navigate to the previous higher-level menu item. <UP> Scrolls through menu items and numbers in ascending order. <DOWN> Scrolls through menu items and numbers in descending order. <ENTER> Is used to select and confirm/store the current selection. The Control Panel LED Display shows the menu items you select from the menu map below. When a menu function is selected, the display will show immediately the first available option for the selected menu function. To select a menu item, press <ENTER>. Press the <MENU> button repeatedly until you reach the desired menu function. Use the <UP> and <DOWN> buttons to navigate the menu options. Press the <ENTER> button to select the menu function currently displayed, or to enable a menu option. To return to the previous option or menu without changing the value, press the <MENU> button. Control Panel Menu Structure d --- d001 - d512 4 channel mode / choose DMX address A --- A001 - A512 8 channel mode / choose DMX address FF -- FF01 - FF99 Fade mode r --- r001 - r255 1st LED group intensity G --- G001 - G255 2st LED group intensity b --- b001 - b255 3st LED group intensity U --- U001 - U255 4th LED group intensity deoo -- Auto run mode SoUd -- Sound active mode SLAV -- Sets fixture to run in slave mode Page 12

13 DMX Mode Allows the unit to be controlled by any universal DMX controller. 1. To set the fixture to run in 4-channel DMX mode, use the <MENU> button to navigate to d001, then press <ENTER>. To choose a different starting DMX address, use the <UP/DOWN> buttons to select from d001-d512. Then press the <ENTER> button to confirm. 2. To set the fixture to run in 8-channel DMX mode, use the <MENU> button to navigate to A001, then press <ENTER>. To choose a different starting DMX address, use the <UP/DOWN> buttons to select from A001-A512. Then press the <ENTER> button to confirm. Master/Slave Mode (Auto & Sound Active Modes): Allows you to link up to 32 units together without a controller. 1.) Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of the units. It may be necessary to use a terminator at the last fixture. 2.) To set one or more fixtures to act as slave units, use the <UP/DOWN> buttons to reach SLAV in the menu on the slave units, then push <ENTER>. These units will now react in the same as the master fixture. 3.) Then on the master fixture, use the <UP/DOWN> buttons to reach: Sound Active SoUn then <ENTER> to confirm. Auto Mode deoo then <ENTER> to confirm. Fade Mode FF -- then FF0 1 - FF99, <ENTER>. Jump Mode CC -- then CC0 1 - CC99, <ENTER>. Set custom intensity levels in M/S & Standalone Modes: Using this function, you can adjust the intensity of LED segments 1, 2, 3 and 4 by adjusting their values from You can also use this function to adjust the overall maximum intensity of the fixture in any mode. Please note that modifying the values in this step will affect ALL modes, therefore we recommend resetting all levels to their highest value (255) after using this mode. 1.) Use the <MENU> button to navigate to r255, G255, b255, or u255 then press <ENTER>. Then to set different intensity levels for any of these use the <UP/DOWN> buttons to select from (0% <--> 100%). Then press the <ENTER> button to confirm. Page 13

14 5. APPENDIX Keeping Your Puck CSI Xtreme As Good As New The fixture you ve received is a rugged, tough piece of pro lighting equipment, and as long as you take care of it, it will take care of you. That said, like anything, you ll need to take care of it if you want it to operate as designed. You should absolutely keep the fixture clean, especially if you are using it in an environment with a lot of dust, fog, haze, wild animals, wild teenagers or spilled drinks. Cleaning the optics routinely with a suitable glass cleaner will greatly improve the quality of light output. Keeping the fans free of dust and debris will keep the fixture running cool and prevent damage from overheating. In transit, keep the fixtures in cases. You wouldn t throw a prized guitar, drumset, or other piece of expensive gear into a gear trailer without a case, and similarly, you shouldn t even think about doing it with your shiny new light fixtures. Common sense and taking care of your fixtures will be the single biggest thing you can do to keep them running at peak performance and let you worry about designing a great light show, putting on a great concert, or maximizing your client s satisfaction and wow factor. That s what it s all about, after all! Returns (Gasp!) We ve taken a lot of precautions to make sure you never even have to worry about sending a defective unit back, or sending a unit in for service. But, like any complex piece of equipment designed and built by humans, once in a while, something doesn t go as planned. If you find yourself with a fixture that isn t behaving like a good little fixture should, you ll need to obtain a Return Authorization (RA). Don t worry, this is easy. Just send an to support@blizzardlighting.com, and we ll issue you an RA. Then, you ll need to send the unit to us using a trackable, pre-paid freight method. We suggest using USPS Priority or UPS. Make sure you carefully pack the fixture for transit, and whenever possible, use the original box & packing for shipping. When returning your fixture for service, be sure to include the following: 1.) Your contact information (Name, Address, Phone Number, address). 2.) The RA# issued to you 3.) A brief description of the problem/symptoms. We will, at our discretion, repair or replace the fixture. Please remember that any shipping damage which occurs in transit to us is the customer s responsibility, so pack it well! Shipping Issues Damage incurred in shipping is the responsibility of the shipper, and must be reported to the carrier immediately upon receipt of the items. Claims must be made within seven (7) days of receipt. Page 14

15 Tech Specs Weight & Dimensions Length Width Height Weight Power Operating Voltage Power Consumption Light Source LED Optical Beam Angle Thermal Max. Operating Temp. Control Protocol DMX Channels Input Output Other Operating Modes Pimp Name Sugartastic Puck CSI Dogg Warranty 8.25 inches (210 mm) inches (98.43 mm) 8.5 inches (215.9 mm) 4.2 lbs (1.3 kg) VAC, Hertz 108W 36x 3w nm UV LEDs 25 degrees, 29 degree field 104 degrees F (40 degrees C) ambient USITT DMX or 8 (User Selectable) 3-pin XLR Male 3-pin XLR Female Standalone, Master/Slave, Sound Active 2-year limited warranty, does not cover malfunction caused by damage to LED s. Troubleshooting Symptom Fixture Auto-Shut Off Beam is Dim No Light Output Blown Fuse No Response to Audio Fixture Not Responding / Responding Erratically Solution Check the fan in the fixture. If it is stopped or moving slower than normal, the unit may have shut itself off due to high heat. This is to protect the fixture from overheating. Clear the fan of obstructions, or return the unit for service. Check optical system and clean excess dust/grime. Also ensure that the 220V/110V switch is in the correct position, if applicable. Check to ensure fixture is operating under correct mode, IE sound active/ auto/dmx/etc., if applicable. Contact service for more information. Check AC cord and circuit for damage, verify that moving parts are not restricted and that unit s ventilation is not obstructed Verify that the fixture is in Sound Active mode. Adjust Audio Sensitivity, If Applicable. Make sure all connectors are seated properly and securely. Use Only DMX Cables. Install a Terminator. Check all cables for defects. If your problem isn t listed please contact support@blizzardlighting.com. Page 15

16 Enjoy your product! Our sincerest thanks for your purchase! --The Blizzard Lighting

Snapshot. LEDrain 38 USER MANUAL. Ok on Dimmer. Outdoor OK. Sound Activated. DMX/Master/Slave. 115V/230V Switch. Replaceable Fuse.

Snapshot. LEDrain 38 USER MANUAL. Ok on Dimmer. Outdoor OK. Sound Activated. DMX/Master/Slave. 115V/230V Switch. Replaceable Fuse. LEDrain 38 Snapshot Ok on Dimmer Outdoor OK Sound Activated DMX/Master/Slave 5V/30V Switch Replaceable Fuse User Serviceable Duty Cycle USER MANUAL CHAUVET, 3000 N 9 th Ct, Hollywood, FL 3300 U.S.A (800)

More information

1. BEFORE YOU BEGIN... 3 2. INTRODUCTION... 5 3. SETUP... 7. AC POWER... 7 Power Linking... 7 MOUNTING... 8 Orientation... 8 Rigging...

1. BEFORE YOU BEGIN... 3 2. INTRODUCTION... 5 3. SETUP... 7. AC POWER... 7 Power Linking... 7 MOUNTING... 8 Orientation... 8 Rigging... User Manual TABLE OF CONTENTS 1. BEFORE YOU BEGIN... 3 WHAT IS INCLUDED... 3 UNPACKING INSTRUCTIONS... 3 MANUAL CONVENTIONS... 3 ICONS... 3 SAFETY INSTRUCTIONS... 4 2. INTRODUCTION... 5 PRODUCT OVERVIEW...

More information

1. BEFORE YOU BEGIN... 3 2. INTRODUCTION... 5 3. SETUP... 6

1. BEFORE YOU BEGIN... 3 2. INTRODUCTION... 5 3. SETUP... 6 User Manual TABLE OF CONTENTS 1. BEFORE YOU BEGIN... 3 WHAT IS INCLUDED... 3 UNPACKING INSTRUCTIONS... 3 MANUAL CONVENTIONS... 3 ICONS... 3 SAFETY INSTRUCTIONS... 4 2. INTRODUCTION... 5 PRODUCT OVERVIEW...

More information

Bubble King. User Manual

Bubble King. User Manual Bubble King User Manual TABLE OF CONTENTS 1. Before You Begin... 3 What Is Included... 3 Unpacking Instructions... 3 Claims... 3 Text Conventions... 3 Icons... 3 Document Information... 3 Product at a

More information

TABLE OF CONTENTS. Hurricane 1300 User Manual 2 Rev. 4

TABLE OF CONTENTS. Hurricane 1300 User Manual 2 Rev. 4 User Manual TABLE OF CONTENTS 1. BEFORE YOU BEGIN... 3 What Is Included... 3 Unpacking Instructions... 3 Claims... 3 Product at a Glance... 3 Safety Instructions... 4 2. INTRODUCTION... 5 Product Overview...

More information

PRELIMINARY MANUAL STAGE COLOR 48. Preliminary User Guide. Official version will follow soon on: WWW.BRITEQ-LIGHTING.COM TABLE OF CONTENTS

PRELIMINARY MANUAL STAGE COLOR 48. Preliminary User Guide. Official version will follow soon on: WWW.BRITEQ-LIGHTING.COM TABLE OF CONTENTS STGE COO 48 Preliminary User Guide Official version will follow soon on: WWW.BITEQ-IGHTIG.COM TBE OF COTETS 1. Safety Instruction 2. Technical Specification 3. How To Set The Unit 4. How To Control The

More information

Snapshot. User Manual. Use on Dimmer. Outdoor Use. Sound Activated DMX. Master/Slave Autoswitching Power Supply Replaceable Fuse.

Snapshot. User Manual. Use on Dimmer. Outdoor Use. Sound Activated DMX. Master/Slave Autoswitching Power Supply Replaceable Fuse. Snapshot Use on Dimmer Outdoor Use Sound Activated DMX Master/Slave Autoswitching Power Supply Replaceable Fuse User Serviceable Duty Cycle User Manual Chauvet, 3000 N 29 th Ct, Hollywood, FL 33020 U.S.A.

More information

DP-DMX20L 4 CHANNEL DMX DIMMER PACK MODE MENU DISPLAY. OUTPUT: 10A/CH, TOTAL 20A Max. DMX CHANNEL RECEIVE TOTAL DMX CHANNEL DIMMER / SWITCH

DP-DMX20L 4 CHANNEL DMX DIMMER PACK MODE MENU DISPLAY. OUTPUT: 10A/CH, TOTAL 20A Max. DMX CHANNEL RECEIVE TOTAL DMX CHANNEL DIMMER / SWITCH DP-DMX0L OUTPUT: 0A/CH, TOTAL 0A Max. CHANNEL DMX DIMMER PACK DISPLAY RECEIVE DMX CHANNEL TOTAL DMX CHANNEL DIMMER / SWITCH 8888 CHASE PROGRAM CHASE CHASE SPEED CHASE DIMMER MODE MENU Elation Professional

More information

TABLE OF CONTENTS. Returns... 20 Contact Us... 20

TABLE OF CONTENTS. Returns... 20 Contact Us... 20 User Manual TABLE OF CONTENTS 1. Before You Begin...3 What Is Included... 3 Unpacking Instructions... 3 Claims... 3 Text Conventions... 3 Symbols... 3 Disclaimer... 3 Product at a Glance... 4 Safety Notes...

More information

TABLE OF CONTENTS. 6. Technical Specifications... 20. Page 2 of 20 COLORband PiX User Manual (Rev. 02)

TABLE OF CONTENTS. 6. Technical Specifications... 20. Page 2 of 20 COLORband PiX User Manual (Rev. 02) User Manual TABLE OF CONTENTS 1. Before You Begin... 3 What Is Included... 3 Unpacking Instructions... 3 Claims... 3 Text Conventions... 3 Icons... 3 Document Information... 3 Product at a Glance... 4

More information

Warning! To prevent or reduce the risk of electrical shock or fire, do. Caution! There are no user serviceable parts inside this unit.

Warning! To prevent or reduce the risk of electrical shock or fire, do. Caution! There are no user serviceable parts inside this unit. Rev. 2/08 American DJ User Instructions American DJ 622 S. Eastern Ave. Los Angeles Ca. 90040 www.americandj.com Introduction Unpacking: Thank you for purchasing the by American DJ. Every has been thoroughly

More information

Stage Color LED. Elation Professional 4295 Charter Street Los Angeles, Ca 90058 www.elationlighting.com. Rev. 06/21/07

Stage Color LED. Elation Professional 4295 Charter Street Los Angeles, Ca 90058 www.elationlighting.com. Rev. 06/21/07 Elation Professional 4295 Charter Street Los Angeles, Ca 90058 www.elationlighting.com Rev. 06/21/07 Elation Professional, Los Angeles Ca. 1 www.elationlighting.com Stage Color LED TABLE OF CONTENS CONTENTS

More information

Warning! To prevent or reduce the risk of electrical shock or fire, do

Warning! To prevent or reduce the risk of electrical shock or fire, do Introduction Rev. 7/07 User Instructions American DJ 495 Charter Street Los Angeles Ca. 90058 www.americandj.com Unpacking: Thank you for purchasing the by American DJ. Every has been thoroughly tested

More information

Warning! To prevent or reduce the risk of electrical shock or fire, do. Caution! There are no user serviceable parts inside this unit.

Warning! To prevent or reduce the risk of electrical shock or fire, do. Caution! There are no user serviceable parts inside this unit. Introduction 7/08 User Instructions American DJ 6 S. Eastern Ave. Los Angeles Ca. 90040 www.americandj.com Unpacking: Thank you for purchasing the by American DJ. Every has been thoroughly tested and has

More information

Fixture One Power Cord One User Manual One Omega Bracket One DMX Cable - One

Fixture One Power Cord One User Manual One Omega Bracket One DMX Cable - One 1. INTRODUCTION AND UNPACKING Thank you for purchasing the MICROH LED NEO SPOT 60R moving head fixture. For your own safety and knowledge, please read this manual before installing or operating the device.

More information

OPTI TRI PAR. User Instructions. Elation Professional 6122 S. Eastern Ave. Los Angeles CA. 90040 www.elationlighting.com

OPTI TRI PAR. User Instructions. Elation Professional 6122 S. Eastern Ave. Los Angeles CA. 90040 www.elationlighting.com Introduction OPTI TRI PAR Rev. 5/09 User Instructions Elation Professional 6122 S. Eastern Ave. Los Angeles CA. 90040 www.elationlighting.com Unpacking: Thank you for purchasing the by Elation Professional.

More information

LED Cube Direct Control 30 ORDERCODE 41131

LED Cube Direct Control 30 ORDERCODE 41131 LED Cube Direct Control 30 ORDERCODE 41131 Congratulations! You have bought a great, innovative product from Showtec. The Showtec LED Cube Direct Control 30 brings excitement to any venue. Whether you

More information

User Instructions. Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.

User Instructions. Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. Introduction Rev. /06 User Instructions American DJ 495 Charter Street Los Angeles Ca. 90058 www.americandj.com Unpacking: Thank you for purchasing the by American DJ. Every has been thoroughly tested

More information

TABLE OF CONTENTS. Page 2 of 13 MotionFaçade LED User Manual (Rev. 6)

TABLE OF CONTENTS. Page 2 of 13 MotionFaçade LED User Manual (Rev. 6) User Manual TABLE OF CONTENTS 1. Before You Begin...3 What Is Included... 3 Unpacking Instructions... 3 Claims... 3 Text Conventions... 3 Icons... 3 Document Information... 3 Product at a Glance... 4 Safety

More information

19 LED Tube Controller ORDERCODE 41003

19 LED Tube Controller ORDERCODE 41003 19 LED Tube Controller ORDERCODE 41003 Congratulations! You have bought a great, innovative product from Showtec. The Showtec 19 LED Tube Controller brings excitement to any venue. Whether you want simple

More information

MultiDim MKII V.2 ORDERCODE 50386

MultiDim MKII V.2 ORDERCODE 50386 MultiDim MKII V.2 ORDERCODE 50386 Congratulations! You have bought a great, innovative product from Showtec. The Showtec MultiDim brings excitement to any venue. Whether you want simple plug-&-play action

More information

Dotz Bar 1.4. User Instructions

Dotz Bar 1.4. User Instructions 0 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying product names

More information

User Instructions. Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.

User Instructions. Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. Introduction User Instructions Unpacking: Thank you for purchasing the by American DJ. Every has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping

More information

User Instructions. Warning! To prevent or reduce the risk of electrical shock or fire, do

User Instructions. Warning! To prevent or reduce the risk of electrical shock or fire, do 0/08 User Instructions American DJ 622 S. Eastern Ave. Los Angeles CA. 90040 www.americandj.com Introduction Unpacking: Thank you for purchasing the by American DJ. Every has been thoroughly tested and

More information

LED BAR 126 / 252 RGB. Owner s Manual LED BAR RGB

LED BAR 126 / 252 RGB. Owner s Manual LED BAR RGB LED BAR 126 / 252 RGB Owner s Manual LED BAR RGB Thank you for choosing one of our LED bars. Please read this user manual carefully and follow the instructions to avoid danger or damage to the unit due

More information

50W/100W LED Zoom User Manual

50W/100W LED Zoom User Manual 50W/100W LED Zoom User Manual Code: ELUM042-50W - (5600K) Code: ELUM042A - 100W - (5600K) Code: ELUM042D - 100W - (3200K) 1 2 FUSE F2A~250V Overview: You should find inside the Elemen8 carton the following

More information

Acrobat. user manual

Acrobat. user manual Acrobat user manual 1 mounting bracket 2 swivel locks 3 focus adjustment 4 effects cover 5 lamp access 6 13 mm clamp hole 7 air vent 8 AC input & main fuse 9 data sockets 10 DIP-switch 1999-2001 Martin

More information

LEDPAR64 USER MANUAL

LEDPAR64 USER MANUAL LEDPAR64 USER MANUAL 1 Table of Content Part I General Information 1.1 Introduction...3 1.2 Safety Information.. 3 1.3 Unpacking..4 1.4 Specifications....4 1.5 Features.. 4 Part II Installation and Operation

More information

TABLE OF CONTENTS. 1. Before You Begin... 3

TABLE OF CONTENTS. 1. Before You Begin... 3 User Manual TABLE OF CONTENTS 1. Before You Begin... 3 What Is Included... 3 Unpacking Instructions... 3 Claims... 3 Text Conventions... 3 Icons... 3 Document Information... 3 Product at a Glance... 4

More information

K E E P E TH T I H S I MA M N A U N A U L A FO F R

K E E P E TH T I H S I MA M N A U N A U L A FO F R Quad-C LED Moving Wash Pro SI-055 User Manual KEEP THIS MANUAL FOR FUTURE NEEDS 1. Unpacking Thank you for choosing Color Imagination s Quad-C LED Moving Wash Pro. For your own safety, please read this

More information

Design LED 60 Strip. Elation Professional 4295 Charter Street Los Angeles, Ca 90058 www.elationlighting.com. Rev. 01/29/07

Design LED 60 Strip. Elation Professional 4295 Charter Street Los Angeles, Ca 90058 www.elationlighting.com. Rev. 01/29/07 Design LED 60 Strip Elation Professional 4295 Charter Street Los Angeles, Ca 90058 www.elationlighting.com Rev. 01/29/07 TABLE OF CONTENS CONTENTS 1. General Information 3 a. Introduction. 3 b. Unpacking....

More information

FT-100 Fire Training Fog Machine User Manual English

FT-100 Fire Training Fog Machine User Manual English FT-100 Fire Training Fog Machine User Manual English 2015 Antari Lighting and Effects Ltd. User Manual - English Safety Information Please read the following safety information carefully before operating

More information

TABLE OF CONTENTS. Product Maintenance... 16 6. Technical Specifications...17 Returns... 18 Contact Us... 18

TABLE OF CONTENTS. Product Maintenance... 16 6. Technical Specifications...17 Returns... 18 Contact Us... 18 User Manual TABLE OF CONTENTS 1. Before You Begin...3 What Is Included... 3 Unpacking Instructions... 3 Claims... 3 Text Conventions... 3 Symbols... 3 Disclaimer... 3 Product at a Glance... 4 Safety Notes...

More information

The Foundation User Manual LED Battery Slim Par Fixture (RGBA, DMX 7Ch/4CH)

The Foundation User Manual LED Battery Slim Par Fixture (RGBA, DMX 7Ch/4CH) The Foundation User Manual LED Battery Slim Par Fixture (RGBA, DMX 7Ch/4CH) Page 1 I. Security: 1. Make sure the user voltage cannot higher or lower than the regulating voltage. 2. Please use proper and

More information

ComPar KIT 1 & 2 DMX LED light set

ComPar KIT 1 & 2 DMX LED light set ComPar KIT 1 & 2 DMX LED light set User manual 1 Safety precautions WARNING: This unit may cause serious injury to the eyes when used incorrectly. It is therefore strongly advised to read this user manual

More information

LED Par 56 Short DMX ORDERCODE 42421

LED Par 56 Short DMX ORDERCODE 42421 LED Par 56 Short DMX ORDERCODE 42421 Congratulations! You have bought a great, innovative product from Showtec. The Showtec LED Par 56 brings excitement to any venue. Whether you want simple plug-&-play

More information

American DJ. User Instructions. American DJ

American DJ. User Instructions. American DJ /05 American DJ User Instructions American DJ 495 Charter Street Los Angeles Ca. 90058 www.americandj.com Introduction Unpacking: Thank you for purchasing the by American DJ. Every has been thoroughly

More information

Ref. Nr. 150.569 WI-PAR 8X 3W LED TRI COLOR BATTERY 2.4GHZ DMX MANUAL

Ref. Nr. 150.569 WI-PAR 8X 3W LED TRI COLOR BATTERY 2.4GHZ DMX MANUAL Ref. Nr. 150.569 WI-PAR 8X 3W LED TRI COLOR BATTERY 2.4GHZ DMX MANUAL Thank you for purchasing our company products. Please read these instructions carefully to enjoy optimum performance and a longer service

More information

LED Par 64 Short V2 ORDERCODE 42464

LED Par 64 Short V2 ORDERCODE 42464 LED Par 64 Short V2 ORDERCODE 42464 Congratulations! You have bought a great, innovative product from Showtec. The Showtec LED Par 64 brings excitement to any venue. Whether you want simple plug-&-play

More information

USER MANUAL PLEASE KEEP THIS FOR FUTURE USE

USER MANUAL PLEASE KEEP THIS FOR FUTURE USE LED Super Beam USER MANUAL PLEASE KEEP THIS FOR FUTURE USE 1. Unpacking 10. Maintenance and Cleaning Thank you for choosing Super beam light. For your own safety, please read this manual before installing

More information

American DJ. User Instructions

American DJ. User Instructions American DJ User Instructions Introduction Unpacking: Thank you for purchasing the by American DJ. Every has been thoroughly tested and has been shipped in perfect operating condition. Carefully check

More information

Shogun Blue Laser Head ORDERCODE 30972

Shogun Blue Laser Head ORDERCODE 30972 Shogun Blue Laser Head ORDERCODE 30972 Congratulations! You have bought a great, innovative product from Showtec. The Showtec Shogun Laser Head brings excitement to any venue. Whether you want simple plug-&-play

More information

Ref. Nr. 150.662 LCP-288 LED COLOR PANEL 288X LED 5MM MANUAL

Ref. Nr. 150.662 LCP-288 LED COLOR PANEL 288X LED 5MM MANUAL Ref. Nr. 150.662 LCP-288 LED COLOR PANEL 288X LED 5MM MANUAL Thank you for purchasing our company products. Please read these instructions carefully to enjoy optimum performance and a longer service life

More information

STAGE SETTER-8. User Instructions. Elation Professional

STAGE SETTER-8. User Instructions. Elation Professional STAGE SETTER-8 User Instructions Elation Professional A Division of the American DJ Group of Companies 4295 Charter Street Los Angeles, CA 90058 USA Tel: 323-582-2650 Fax: 323-582-2610 Web: www.elationlighting.com

More information

Moving Head - One Signal Cable - One Omega Clamp One Power Cable - One Safety

Moving Head - One Signal Cable - One Omega Clamp One Power Cable - One Safety TABLE OF CONTENTS 1. INTRODUCTION AND UNPACKING 1 2. SAFTEY INSTRUCTIONS 1-2 3. OPERATION INSTRUCTIONS 2-3 4. MOUNTING AND INSTALLATION 4 5. DMX-512 CONTROL CONNECTIONS 5 6. MENU NAVIGATION 6 7. PHOTOMETRIC

More information

NSI DIGITAL DIMMING SYSTEM DDS 9800 DIMMER PACKS

NSI DIGITAL DIMMING SYSTEM DDS 9800 DIMMER PACKS NSI DIGITAL DIMMING SYSTEM NSI DIGITAL DIMMING SYSTEM DDS 9800 DIMMER PACKS Software Revision 1.41, Version C UL, Mfg Q3/96, and above SPECIFICATIONS Number of Channels: 9800 : 8 channels Output capacity:

More information

Light Source User Guide

Light Source User Guide Light Source User Guide Compact DMX Light Source Models covered by this manual: UFO 150 CDMXG Glass, DMX - 240V UFO 150 CDMXP Plastic, DMX - 240V Universal Fibre Optics Issue 2 Revised: 23092013 Universal

More information

LED Matrix Blinder 5x5 DMX blinder. user manual

LED Matrix Blinder 5x5 DMX blinder. user manual LED Matrix Blinder 5x5 DMX blinder user manual Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de

More information

LED Par 56 Ultra Bright RGB Black ORDERCODE 42450 Polished ORDERCODE 42451

LED Par 56 Ultra Bright RGB Black ORDERCODE 42450 Polished ORDERCODE 42451 LED Par 56 Ultra Bright RGB Black ORDERCODE 42450 Polished ORDERCODE 42451 Congratulations! You have bought a great, innovative product from Showtec. The Showtec LED Par 56 Ultra Bright RGB brings excitement

More information

ITA3D 710. RGB DMX laser with 3D effect. User manual

ITA3D 710. RGB DMX laser with 3D effect. User manual ITA3D 710 RGB DMX laser with 3D effect User manual 1 Safety precautions WARNING: This unit may cause serious injury to eyesight when used incorrect. It therefore is strongly advised to read this user manual

More information

K E E P E TH T I H S I MA M N A U N A U L A FO F R

K E E P E TH T I H S I MA M N A U N A U L A FO F R IP65 LED Wall Washer W-010 User Manual KEEP THIS MANUAL FOR FUTURE NEEDS 1. Unpacking Thank you for our Color Imagination's IP65 LED Wall Washer. For your own safety, please read this manual before installing

More information

Congratulations! Thank you!

Congratulations! Thank you! TM-47 ORDERCODE D1370 Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio Microphone range brings excitement to any venue. Whether you want simple plug-&-play action

More information

7x10W 4IN1 Indoor Par Light User Manual

7x10W 4IN1 Indoor Par Light User Manual 7x10W 4IN1 Indoor Par User Manual Introduction Welcome to use High Power 4IN1 Indoor LED PAR under Neo-Neon Brand, This fixture applies high power LED technology and enjoys long life span. It can work

More information

LASER SHOW SYSTEM LUNA. User's Manual

LASER SHOW SYSTEM LUNA. User's Manual LASER SHOW SYSTEM LUNA User's Manual DMX Address Chart This chart lists the DMX dipswitch setting for DMX address 1 through 511. Follow the instructions below to configure fixture dipswitches with you

More information

ORLAND FOLLOW PR-1211

ORLAND FOLLOW PR-1211 ORLAND FOLLOW PR-1211 This product manual contains important information about the safe installation and use of this projector. Please read and follow these instructions carefully and keep this manual

More information

Digital Photo Picture Frame. Operation Manual

Digital Photo Picture Frame. Operation Manual Digital Photo Picture Frame Operation Manual 20070309 CONGRATULATIONS on your purchase of a Polaroid 7 LCD Digital Photo Picture Frame. Please read carefully and follow all warnings and instructions in

More information

American DJ. User Instructions. American DJ

American DJ. User Instructions. American DJ American DJ American DJ American DJ World Headquarters: 4295 Charter Street Los Angeles, CA 90058 USA Tel: 323-582-2650 / Fax: 323-582-2610 Web: www.americandj.com / E-mail: info@americandj.com American

More information

LED Par 64 Short Q4-18 ORDERCODE 42468

LED Par 64 Short Q4-18 ORDERCODE 42468 LED Par 64 Short Q4-18 ORDERCODE 42468 Highlite International B.V. Vestastraat 2 6468 EX Kerkrade The Netherlands Phone: +31 45-5667700 Congratulations! You have bought a great, innovative product from

More information

PART 1 PRODUCT (GENERAL)...1.

PART 1 PRODUCT (GENERAL)...1. 11 T ABLE OF CONTENTS PART 1 PRODUCT (GENERAL)...1. 1.1--PRODUCT INTRODUCTION...1. 1.2--PRODUCT FEATURES...1. 1.3--TECHNICAL SPECIFICATIONS...2. 1.4--PHOTOMETRIC DATA...3. 1.5--SAFETY WARNING...4. PART

More information

MCR1900 Media Converter 19-Slot Chassis

MCR1900 Media Converter 19-Slot Chassis MCR1900 Media Converter 19-Slot Chassis Installation Guide Part #5500304-11 Copyright Statement This document must not be reproduced in any way whatsoever, either printed or electronically, without the

More information

PART 1 PRODUCT (GENERAL)...1.

PART 1 PRODUCT (GENERAL)...1. TABLE OF CONTENTS PART 1 PRODUCT (GENERAL)...1. 1.1--PRODUCT INTRODUCTION...1. 1.2--PRODUCT FEATURES...1. 1.3--TECHNICAL SPECIFICATIONS...2. 1.4--PHOTOMETRIC DATA...3. 1.5--SAFETY WARNING...4. PART 2 INSTALLATION...5.

More information

User Instructions. Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.

User Instructions. Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. User Instructions General Information Unpacking: Thank you for purchasing the by American DJ. Every has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping

More information

Four Way 220 LED DMX Moonflower

Four Way 220 LED DMX Moonflower Four Way 220 LED DMX Moonflower Model: QUADRA MOON www.pulse-light.co.uk 1 Safety Information The lightning bolt within a triangle is intended to alert the user to the presence of dangerous voltage levels

More information

Par 56 90W COB RGB ORDERCODE 43300

Par 56 90W COB RGB ORDERCODE 43300 Par 56 90W COB RGB ORDERCODE 43300 Highlite International B.V. Vestastraat 2 6468 EX Kerkrade The Netherlands Phone: +31 45-5667700 Congratulations! You have bought a great, innovative product from Showtec.

More information

Match. GE Digital Energy. Uninterruptible Power Supply 500-1500 VA. Technology for the Digital World. Match UPS. GE Digital Energy.

Match. GE Digital Energy. Uninterruptible Power Supply 500-1500 VA. Technology for the Digital World. Match UPS. GE Digital Energy. Match Uninterruptible Power Supply 500-1500 VA Manufactured by: General Electric Company Telephone +41 (0)91 / 850 51 51 CH 6595 Riazzino (Locarno) Fax +41 (0)91 / 850 51 44 Switzerland Website www.gedigitalenergy.com

More information

VK-250 WARRANTY REGISTRATION FORM

VK-250 WARRANTY REGISTRATION FORM VK-250 WARRANTY REGISTRATION FORM Unit Serial Number: Customer Name: Address: Date of Purchase: Purchased From: Dealer Name: Address: IMPORTANT NOTE: In order to receive the full five year product warranty,

More information

Cable Tester Pro ORDERCODE D1909

Cable Tester Pro ORDERCODE D1909 Cable Tester Pro ORDERCODE D1909 Congratulations! You have bought a great, innovative product from DAP Audio. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional

More information

High Efficiency Vaporizing System and Highly Durable Heaters Ensure 25% Increased Output.

High Efficiency Vaporizing System and Highly Durable Heaters Ensure 25% Increased Output. High Efficiency Vaporizing System and Highly Durable Heaters Ensure 25% Increased Output. Modular Design for Easy, Cost Effective Maintenance. Standardized Interface Allows Interchangeable Control Modules

More information

PUSH CV. Vi säljer och konsulterar Ledbelysning. Utebelysning Innebelysning Led-strip RGB Drivdon. SÄLJKONTOR Torstensviksvägen 6 439 62 Frillesås

PUSH CV. Vi säljer och konsulterar Ledbelysning. Utebelysning Innebelysning Led-strip RGB Drivdon. SÄLJKONTOR Torstensviksvägen 6 439 62 Frillesås PUSH CV Vi säljer och konsulterar Ledbelysning Utebelysning Innebelysning Led-strip RGB Drivdon HUVUDKONTOR Kungegårdsgatan 7 441 57 Alingsås SÄLJKONTOR Torstensviksvägen 6 439 62 Frillesås 0322-30 30

More information

American DJ. User Instructions

American DJ. User Instructions Revised 10/03 American DJ User Instructions American DJ 4295 Charter Street Los Angeles Ca. 90058 www.americandj.com Introduction General instructions: To optimize the performance of this product, please

More information

Sunstrip Active DMX ORDERCODE 30710

Sunstrip Active DMX ORDERCODE 30710 Sunstrip Active DMX ORDERCODE 30710 Congratulations! You have bought a great, innovative product from Showtec. The Showtec Sunstrip Active DMX brings excitement to any venue. Whether you want simple plug-&-play

More information

IS200-MH. User Manual. 10. Specifications. Input Voltage: AC90-260V 50/60Hz. LED Quantities: 1*150W High brightness white LED unit

IS200-MH. User Manual. 10. Specifications. Input Voltage: AC90-260V 50/60Hz. LED Quantities: 1*150W High brightness white LED unit 10. Specifications Input Voltage: AC90-260V 50/60Hz LED Quantities: 1*150W High brightness white LED unit Control Signal: DMX512, master-slave and sound activated or auto operation Control Channel: 16

More information

Operation and Installation Manual

Operation and Installation Manual Operation and Installation Manual RCM-10 Remote Control Monitor and RSM-10 Remote Status Monitor for the CNA-100 & CNA-200 Automations Revision 1.1 9/98 WARRANTY INFORMATION The RCM-10 Remote Control

More information

User Guide. HDMI Active Cable Extender. DVI-7370c

User Guide. HDMI Active Cable Extender. DVI-7370c User Guide HDMI Active Cable Extender DVI-7370c TABLE OF CONTENTS SECTION PAGE PRODUCT SAFETY...1 PRODUCT LIABILITY...1 1.0 INTRODUCTION...2 2.0 SPECIFICATIONS...3 3.0 PACKAGE CONTENTS...4 4.0 CONNECTING

More information

MANUAL ENGLISH. Ordercode: 50901. Highlite International B.V. Vestastraat 2 6468 EX Kerkrade the Netherlands

MANUAL ENGLISH. Ordercode: 50901. Highlite International B.V. Vestastraat 2 6468 EX Kerkrade the Netherlands MANUAL ENGLISH DDP-616 V1 Highlite International B.V. Vestastraat 2 6468 EX Kerkrade the Netherlands Table of contents Warning... 2 Safety Instructions... 2 Operating Determinations... 4 Connection with

More information

Freedom Par Quad-4 IP User Manual Rev. 1

Freedom Par Quad-4 IP User Manual Rev. 1 User Manual Freedom Par Quad-4 IP User Manual Rev. 1 TABLE OF CONTENTS 1. Before You Begin... 3 What Is Included... 3 Unpacking Instructions... 3 Claims... 3 Text Conventions... 3 Symbols... 3 Disclaimer...

More information

16/32 Channel 1U Rack Mount CCTV Power Supply

16/32 Channel 1U Rack Mount CCTV Power Supply 16/32 Channel 1U Rack Mount CCTV Power Supply Manual PH-A3224-GUQ Shown 16-Channel 32-Channel PTC PH-A1612-PUQ PH-A3224-PUQ Glass Fuse PH-A1612-GUQ PH-A3224-GUQ Industrial design 12 Amp 3 Amps per channel

More information

INNO POCKET SPOT. User Instructions

INNO POCKET SPOT. User Instructions INNO POCKET SPOT 2014 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying

More information

VX 2400 Dimmer User's Manual

VX 2400 Dimmer User's Manual TM VX 2400 Dimmer User's Manual 21-2119C Manual Revision 1.01 Software Version 1.0 10 March 1994 Table of Contents 1. General Description...3 1.1. Standard Features:...3 2. Installing Options...4 2.1.

More information

HP ProDisplay P19A LED Backlit Monitor. User Guide

HP ProDisplay P19A LED Backlit Monitor. User Guide HP ProDisplay P19A LED Backlit Monitor User Guide 2013 Hewlett-Packard Development Company, L.P. The only warranties for HP products and services are set forth in the express warranty statements accompanying

More information

Edition Notes. Edition Notes. Trademarks CHAUVET is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET or

Edition Notes. Edition Notes. Trademarks CHAUVET is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET or User Manual Edition Notes Edition Notes The OVATION F-95WW User Manual Rev. 1 covers the description, safety precautions, installation, programming, operation, and maintenance of the OVATION F-95WW. CHAUVET

More information

Installation and Operation Manual Back-UPS BX800CI-AS/BX1100CI-AS

Installation and Operation Manual Back-UPS BX800CI-AS/BX1100CI-AS + Installation and Operation Manual Back-UPS BX800CI-AS/BX1100CI-AS Inventory Safety and General Information bu001c This unit is intended for indoor use only. Do not operate this unit in direct sunlight,

More information

IMPORTANT SAFETY INSTRUCTIONS WARNING READ AND SAVE THESE OPERATING AND SAFETY INSTRUCTIONS BEFORE USING THIS HEATER.

IMPORTANT SAFETY INSTRUCTIONS WARNING READ AND SAVE THESE OPERATING AND SAFETY INSTRUCTIONS BEFORE USING THIS HEATER. THERMAWAVE CERAMIC HEATER Model HZ-850 Series Model HZ-860 Series IMPORTANT SAFETY INSTRUCTIONS WARNING READ AND SAVE THESE OPERATING AND SAFETY INSTRUCTIONS BEFORE USING THIS HEATER. Warning Failure to

More information

CB-100 LED Color Beam LED spotlight. user manual

CB-100 LED Color Beam LED spotlight. user manual CB-100 LED Color Beam LED spotlight user manual Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de

More information

e-4 AWT07MLED 7 Q TFT LCD MONITOR (LED Backlighted) USER MANUAL

e-4 AWT07MLED 7 Q TFT LCD MONITOR (LED Backlighted) USER MANUAL Thank you for purchasing our product. Please read this User s Manual before using the product. Change without Notice AWT07MLED 7 Q TFT LCD MONITOR (LED Backlighted) USER MANUAL e-4 SAFETY PRECAUTIONS Federal

More information

LDG DTS-4/4R Desktop Coaxial Switch / Remote

LDG DTS-4/4R Desktop Coaxial Switch / Remote LDG DTS-4/4R Desktop Coaxial Switch / Remote LDG Electronics 1445 Parran Road, PO Box 48 St. Leonard MD 20685-2903 USA Phone: 410-586-2177 Fax: 410-586-8475 ldg@ldgelectronics.com www.ldgelectronics.com

More information

USER MANUAL Stand Alone Power Supply PSQ 2909 / PSQ 3909 / PSQ 4909 PSQ 2920 / PSQ 3920 / PSQ 4920

USER MANUAL Stand Alone Power Supply PSQ 2909 / PSQ 3909 / PSQ 4909 PSQ 2920 / PSQ 3920 / PSQ 4920 USER MANUAL Stand Alone Power Supply PSQ 2909 / PSQ 3909 / PSQ 4909 PSQ 2920 / PSQ 3920 / PSQ 4920 [This page intentionally left blank] Warning for Your Protection 1. Read these instructions. 2. Keep these

More information

user manual 1.2 ELATION TVL F1WW user manual 1.0

user manual 1.2 ELATION TVL F1WW user manual 1.0 TVL F1WW user manual 1.2 ELATION TVL F1WW user manual 1.0 2013 ELATION PROFESSIONAL all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without

More information

ComPar KIT 1 & 2 DMX LED light set with power outputs

ComPar KIT 1 & 2 DMX LED light set with power outputs ComPar KIT 1 & 2 DMX LED light set with power outputs User manual Introduction Thank you for purchasing the Ayra ComPar Kit. You have either purchased the ComPar Kit 1 or ComPar Kit 2. This user manual

More information

CTL-DCM. Manual. 2012 CASA http://www.casa-laserlight.com

CTL-DCM. Manual. 2012 CASA http://www.casa-laserlight.com CTL-DCM Manual 2012 CASA http://www.casa-laserlight.com Troubleshooting General instructions We will soon lead you into new sense of vision realm a life from now on! Thank you for purchasing this product.please

More information

Mobile 3G. Cellular Signal Booster 460102. Need help? www.wilsonelectronics.com Tech Support 866-294-1660 Mon.- Fri. Hours: 7 am to 6 pm MST

Mobile 3G. Cellular Signal Booster 460102. Need help? www.wilsonelectronics.com Tech Support 866-294-1660 Mon.- Fri. Hours: 7 am to 6 pm MST Mobile 3G Cellular Signal Booster 460102 Need help? www.wilsonelectronics.com Tech Support 866-294-1660 THE ALUMINUM CASING OF YOUR SIGNAL BOOSTER!! WILL ADJUST TO THE TEMPERATURE OF ITS ENVIRONMENT, BUT

More information

Troubleshooting Tips Lifestyle SA-2 & SA-3 Amplifier. Troubleshooting Tips

Troubleshooting Tips Lifestyle SA-2 & SA-3 Amplifier. Troubleshooting Tips Troubleshooting Tips Lifestyle SA-2 & SA-3 Amplifier Refer to the Lifestyle SA-2 & SA-3 Amplifier service manuals, part number 271720 for schematics, PCB layouts and parts lists. Preventative Repair Measures

More information

Matrix 5x5 Blinder ORDERCODE 30711

Matrix 5x5 Blinder ORDERCODE 30711 Matrix 5x5 Blinder ORDERCODE 30711 Congratulations! You have bought a great, innovative product from Showtec. The Showtec Matrix Blinder brings excitement to any venue. Whether you want simple plug-&-play

More information

PS 155 WIRELESS INTERCOM USER MANUAL

PS 155 WIRELESS INTERCOM USER MANUAL PS 155 INTERFACE TO SIMPLEX WIRELESS INTERCOM USER MANUAL Issue 2011 ASL Intercom BV DESIGNED AND MANUFACTURED BY: ASL INTERCOM BV ZONNEBAAN 42 3542 EG UTRECHT THE NETHERLANDS PHONE: +31 (0)30 2411901

More information

Disco Star ORDERCODE 43088

Disco Star ORDERCODE 43088 Disco Star ORDERCODE 43088 Highlite International B.V. Vestastraat 2 6468 EX Kerkrade The Netherlands Phone: +31 45-5667700 Congratulations! You have bought a great, innovative product from Showtec. The

More information

Tone Hammer 500. Owners Manual. Manual Version 1.0

Tone Hammer 500. Owners Manual. Manual Version 1.0 Tone Hammer 500 Owners Manual Manual Version 1.0 1. Incorporating the preamp from the popular Tone Hammer preamp/di pedal this superlight bass head combines three bands of flexible EQ, a colorful "Drive"

More information

INFRARED QUARTZ WALL HEATER

INFRARED QUARTZ WALL HEATER INFRARED QUARTZ WALL HEATER MODEL NO: IQ2000 PART NO: 6939004 MOUNTING & OPERATION INSTRUCTIONS GC0715 INTRODUCTION Thank you for purchasing this CLARKE Infrared Wall Heater. Before attempting to use this

More information

Universal Wireless Effects Controller USER S GUIDE SA115

Universal Wireless Effects Controller USER S GUIDE SA115 Universal Wireless Effects Controller USER S GUIDE SA115 Welcome Thank you for purchasing this Hot Hand 3 Universal Wireless Effects Controller. We hope that the new functionality of the Hot Hand 3 unit

More information

LOXONE 12 Channel Amplifier

LOXONE 12 Channel Amplifier LOXONE 12 Channel Amplifier Item no.: 200110 Thank you for purchasing the Loxone Twelve Channel Amplifier. The versatility of the Amplifier makes it the perfect choice for almost every type of custom multi-room

More information

Mania SCX500. user manual

Mania SCX500. user manual Mania SCX500 user manual DIMENSIONS All dimensions are in millimeters 442 364 178 138 200 2004-2005 Martin Professional A/S, Denmark. All rights reserved. No part of this manual may be reproduced, in any

More information