Dr. Khaled M. S. Gad El Mola

Transcription

1 Dr. Khaled M. S. Gad El Mola Prince Sattam Bin Abdulaziz University, College of Engineering at Al Kharj Mechanical Engineering Department, Industrial Engineering Program, Al Kharj, KSA P.O. Box 173, Al Kharj Home: +(966) Cell: +(966) TEACHING AND RESEARCH INTERESTS - Engineering Probability and Statistics - Engineering Economy - Simulation - Project Management - Production Planning and Control - Quality Control - Operations Research I - Operations Research II - System Reliability and Availability - Design and Analysis of Experiments EDUCATION Ph.D. Department of Industrial Engineering, University of Houston August 2004 Dissertation: A Methodology to Measure the Performance of Manufacturing Systems Advisor: Prof. Hamid R. Parsaei GPA: 4.00 M.Sc. Department of Production Engineering, University of Helwan, Helwan, Cairo, Egypt June 1994 Thesis: Development of a Planning Procedure for Multi-product, Multi-stage Manufacturing System Advisor: Prof. Reda M.S. Abdulaal Equivalent GPA: 3.74 B.Sc. Department of Production Engineering, University of Helwan, Helwan, Cairo, Egypt May 1987 Graduated with honor Equivalent GPA: 4.00

2 PROFESSIONAL EXPERIENCE 2008 Present Assistant Professor, Mechanical Engineering Department, Industrial Engineering Program, Faculty of Engineering at Al Kharj, Salman bin Abdalaziz University, Al Kharj, KSA Instructor, October University for Modern Sciences and Arts (MSA), Faculty of Engineering, Industrial Systems Engineering Department, Spring and Summer Assistant Professor, Department of Mechanical Engineering, Industrial Engineering Division, Helwan University, Helwan, Cairo, Egypt Adjunct Professor, Department of Industrial Engineering, University of Houston, Houston, TX Department of Industrial Engineering, University of Houston, Houston, TX Graduate Teaching Assistant: Engineering Statistics, Engineering Economy I & II, Taguchi Methods, Facilities Planning and Design Department of Industrial Engineering, University of Louisville, Louisville, KY Graduate Teaching Assistant: Engineering Economy, Robotics and Manufacturing Automation laboratory Department of Production Engineering, Helwan University, Helwan, Cairo, Egypt Lecturer: Machine Tool Design, Quality Control, Operations Research, Production Planning and Control, Industrial Organization Department of Production Engineering, Helwan University, Helwan, Cairo, Egypt Demonstrator: Machine Tool Design, Quality Control, Operations Research, Production Planning and Control, Industrial Organization PUBLICATIONS AND PAPERS IN PROGRESS [ 1] Gad El Mola, K. M. Development of a manufacturing strategy of spare parts of water desalination establishment. In preparation to submit to ISI Journal. [ 2] Gad El Mola, K. M. Four-phases Fuzzy-QFD approach to green supply chain at energy production. In preparation to submit to ISI Journal. [ 3] Gad El Mola, K. M. and H. R. Parsaei. A methodology to measure the performance of manufacturing system. In preparation to submit to ISI Journal.

3 [ 4] Gad El Mola, K. M. and Mohamed Al Naggar. A New Current-Based Technique for Discrimination between Internal Faults and Inrush Current within Power Transformers, International Conference on Testing and Measurement: Techniques and Applications (TMTA2015), January 16-17, Thailand, January [ 5] Gad El Mola, K. M. and Mohamed El Naggar. Identification of fault location in a Multi-Terminals Network using Morphological Gradient Technique, WULFENIA JOURNAL, Vol 22, No. 3; March 2015, pp (ISSN: X) (ISI indexed journal, Impact factor= ) [ 6] Gad El Mola, K. M. and Mahmoud Tash. Effect of Laser Speed on Hardness and Corrosion Resistance of Similar and Dissimilar Stainless and Carbon Steels Welding, Wulfenia Journal, Klagenfurt, Austria (ISSN: X) Volume No.22, Issue No. 04, April pp (ISI indexed journal, Impact factor= ) [ 7] Gad El Mola, K. M., E. Abouel Nasr and A. El-Tamimi. Spare Parts Management by Using Analytic Hierarchy Process. Proceedings of the 43 th International Conference of Computers and Industrial Engineering, Hong Kong, October 16-18, [ 8] E. Abouel Nasr, Gad El Mola, K. M., and A. El-Tamimi. An Effective Green Supply Chain at Energy Production. Proceedings of the 43 th International Conference of Computers and Industrial Engineering, Hong Kong, October 16-18, [ 9] Gad El Mola, K. M. Important characteristics and critical dimensions of an effective manufacturing performance manufacturing system. Proceedings of 2012 International Conference on Industrial Engineering and Operations Management, Istanbul, Turkey, July 3-6, [ 10] Gad El Mola, K. M. Economic evaluation of rapid prototyping systems. Proceedings of 2012 International Conference on Industrial Engineering and Operations Management, Istanbul, Turkey, July 3-6, [ 11] Gad El Mola, K. M. and Hamid R. Parsaei. Dimensions and Measures of Manufacturing Performance Measurement. Proceedings of the 40 th International Conference on Computers and Industrial Engineering, Awaji, Japan, July 25-28, [ 12] Gad El Mola, K. M. and Hamid R. Parsaei. Integrated Performance Measurement Systems: A Review and Analysis. Proceedings of the 40 th International Conference on Computers and Industrial Engineering, Awaji, Japan, July 25-28, 2010.

4 [ 13] Gad El Mola, K. M. and Emad S. Abouel Nasr. Typology and Important Characteristics of Manufacturing Performance Measurement. Proceedings of the 9 th Cairo University International Conference on Mechanical Design and Production, Cairo, Egypt, 8-10 January, [ 14] Emad S. Abouel Nasr and Khaled M. Gad El Mola. Developing a Methodology for Extracting Manufacturing Entities from Standard Data Formats. Proceedings of the 9 th Cairo University International Conference on Mechanical Design and Production, Cairo, Egypt, 8-10 January, [ 15] Gad El Mola, K. M., Hamid R. Parsaei, and Herman R. Leep. Quantifying the Effects of Operational Performance Measures using the Analytical Network Process (ANP). Proceedings of the International Conference on Computers and Industrial Engineering, Alexandria, Egypt, October 20-23, [ 16] Gad El Mola, K. M., Hamid R. Parsaei, and Herman R. Leep. Improving the Performance of a Manufacturing System: A Practical case Study. Proceedings of the International Conference on Computers and Industrial Engineering, Alexandria, Egypt, October 20-23, [ 17] Gad El Mola, K. M., Hamid R. Parsaei, and Herman R. Leep. Economic Analysis of Rapid Prototyping Systems, in Kamarani, A. and Nasr, E. (Eds), Rapid Prototyping: Theory and Practice. Springer Verlage, New York, [ 18] Gad El Mola, K. M., Hamid R. Parsaei, Herman R. Leep, and Julius P. Wong. A Model to Quantify the Effect of Operational Performance Measures. Proceedings of the International Conference on Computers and Industrial Engineering, San Francisco, California, November 14-16, [ 19] Gad El Mola, K. M., Hamid R. Parsaei, Herman R. Leep, and Julius P. Wong. Design of an Effective manufacturing performance measurement system. Proceedings of the IERC Conference, Houston, Texas, May 15-19, [ 20] Gad El Mola, K. M. and F. M. Rashed. (1994). Development of a planning procedure for multi-product, multi-stage manufacturing system. Engineering Research Journal, Vol. 5, pp GRADUATE STUDENTS Masters in IE Asmaa A. Mahmoud, M. Sc. Student (Co-advisor with Dr. Mahmoud Hamad) Thesis Title: Hierarchical Production Planning for Multi-Products Production System Fatima A. Ahmed, M. Sc. Student (Co-advisor with Dr. Mohamed Etman) Thesis Title: The Study of the Effective Parameters in a Supply Chain Model

5 HONORS AND AWARDS Thanking and Appreciation Certificate, Egyptian Engineers Association, Riyadh, KSA, Thanking and Appreciation Certificate, Egyptian Engineers Association, Riyadh, KSA, Thanking and Appreciation Certificate, Academic and Educational Affairs, Salman bin Abdulaziz University, Received the Outstanding Lecturer Award, Cullen College of Engineering, University of Houston, Texas, USA, May 2005 Nominated for the best Engineering Management Dissertation Award from the American Society for Engineering Management for 2004 Teaching Assistantship by Department of Industrial Engineering, University of Houston, Texas, USA Teaching Assistantship by Department of Industrial Engineering, University of Louisville, Kentucky, USA Graduate Scholarship, Ministry of High Education of Egypt, Ranked First with honors in the Bachelors Degree Program. FUNDED PROJECTS Proposal-13-ADV56-54: Saudi Riyals: National Science, Technology and Innovation Plan, "Advanced casting technologies for the production of sustainable aluminum components for automotive and aerospace applications" Research Project # 2300/01/2014: Deanship of scientific research at PSAU, "Effect of welding speed on the hardness and corrosion resistance in laser welding of similar and dissimilar materials", Done. Research Project # 1963/01/2014: Deanship of scientific research at PSAU, "Effect of hot work reduction ratios in forging and rolling processes on Hardness, Impact Toughness and microstructure of Thermo mechanically heat treated Low Alloy Steel". Done. Research Project # 126/T/33: Deanship of scientific research at PSAU, "Effect of Heat Treatment on Hardness and Mechanical Properties for Al-Mg- Si (6082) and Al-Cu-Li-Zr (8090) and Al-Mg-Zn (7075) alloys". Done. Research Project # # 26/H/1432: Deanship of scientific research at PSAU, "Effect of Thermo-Mechanical Treatment (TMT) on Hardness and Mechanical Properties for Heat-Treated Al-Mg-Si (6082) and Al-Cu-Li-Zr (8090) alloys: Experimental Correlation Using (DOE) Method". Done.

6 WORKSHOPS AND DEVELOPMENT PROGRAMS E-Learning Management (Blackboard) Workshop, Prince Sattam Bin Abdulaziz University, February 02-23, EBSCO, IEEE & IGI Workshop, Salman bin Abdulaziz University, February 18, IEEE (IEL) Training Workshop, Salman bin Abdulaziz University, December 11, Teaching Evaluation Methods & Exam Matrix, Salman bin Abdulaziz University, April 29, External Audit Programs Workshop, Salman bin Abdulaziz University, April 15, Review and Improvement of Program Specification and Report Workshop, Salman bin Abdulaziz University, September 16-17, How to Compete for Research Fund Workshop, Faculty and Leadership Development Center, University of Helwan, July 3-5, Program and Course Learning Outcomes Bases on NQF for Medical, Science, Engineering, and Humanities Workshop, British Council, National Commission for Academic Accreditation & Assessment, AlKharj University, AlKharj, KSA, November 15, Planning and Implementation of Self Study for Program Accreditation Workshop, British Council and National Commission for Academic Accreditation & Assessment, Riyadh, KSA, February 19-20, Preparing for External Review Workshop, British Council and National Commission for Academic Accreditation & Assessment, Jeddah, KSA, January 11-12, Conducting Quality Surveys, Data Analysis and Reports Workshop, British Council and National Commission for Academic Accreditation & Assessment, Al- Khobar, KSA, January 4-5, Programme Monitoring and Evaluation Workshop, British Council and National Commission for Academic Accreditation & Assessment, Riyadh, KSA, November 6-7, Credit Hour System Workshop, Competency Development and Ongoing Training Center, University of Helwan, Egypt, August 22-24, Code of Ethics Workshop, Competency Development and Ongoing Training Center, University of Helwan, Egypt, August 8-9, Effective Presentation Workshop, Competency Development and Ongoing Training Center, University of Helwan, Egypt, August 4-5, Quality Standards in Teaching Workshop, Competency Development and Ongoing Training Center, University of Helwan, Egypt, August 1-2, Principles of Lean Manufacturing Workshop, Texas Manufacturing Assistance Center, University of Houston, Houston, TX, October Training Course on Production Planning and Control. One-week intensive course, Cairo, Egypt, July, Engineering Education Development Project (EEDP) at Faculty of Engineering, Helwan with total fund $99,000. This project was initiated two educational computer labs (with multimedia facilities) and completed in two years.

7 PROFESSIONAL ACTIVITIES Member of University of Houston, TX, USA ALUMNI Served as reviewer to the Journal of Computers and Industrial Engineering, Journal of Design and Manufacturing Automation, Journal of Engineering Valuation and Cost Analysis, and International Journal of Production Research Registered Engineer, Egyptian Syndicate of Professional Engineers Member of Institute of Industrial Engineers (IIE) Member of Society of Manufacturing Engineers (SME) Member of Alpha Pi Mu Member of University of Houston Alumni Treasurer of the Egyptian Student Association (ESA) Vice President of the Egyptian Student Association (ESA) SERVICE ACTIVITIES (within the institution) Supervisor of Industrial Engineering Program, College of Engineering, Prince Sattam bin Abdulaziz University, Al Kharj, KSA. Member of several college of engineering committees: o ABET Academic Accreditation o NCAAA Academic Accreditation o Academic Affairs o Strategic Plan o Quality o Library Affairs and Textbooks, o etc. COMPUTER SKILLS Environment: Windows. Programming Languages: BASIC, QUICK BASIC, VISUAL BASIC. Software: Arena, MiniTab, Expert Choice. GRADUATE COURSES Advanced Manufacturing Methods Robotics & Manufacturing Automation Production Planning and Control Discrete-event Simulation Statistics Methods in Simulation Discrete Optimization Operations Research II Applied Systems Analysis Statistical Decision Analysis and Design Experimental Design Numerical Analysis

8 Engineering Economy II Quality Control Materials Handling Quality Economics Machine Tools Metal Cutting Industrial Organization Engineering Design Economics Jigs and Fixtures Design Human-Machine Systems Design Introduction to Engineering Logistics Simulation Reading Computer Applications Computer Programming (C++) Advanced Topics in Cellular Manufacturing Systems, Manufacturing Systems Analysis

9 REFERENCES Hamid R. Parsaei, Ph.D., P.E. Professor and Chairman Department of Industrial Engineering Director, Texas Manufacturing Assistance Center University of Houston Houston, TX Telephone: + (713) Telephone: + (974) Fax: (713) parsaei@uh.edu Ali K. Kamrani, Ph.D. Associate Professor Department of Industrial Engineering University of Houston Houston, TX Telephone: + (713) Fax: (713) akamrani@uh.edu Herman R. Leep, Ph.D., P.E. CMfgE Professor Department of Industrial Engineering University of Louisville Louisville, KY Telephone: + (502) Fax: (502) hrleep01@gwise.louisville.edu