Product Information

Size: px
Start display at page:

Download "Product Information 2013-2015"

Transcription

1 Product Information Sign of Quality Worldwide Solu on Provider for Vehicle Safety and Emissions Tes ng Systems V L Test Systems Limited Automobile Safety Testing Equipment - Test Lanes 3/4 Middle Slade Buckingham Ind. Park Buckingham Bucks MK18 1WA United Kingdom Tel. +44 (0) Fax +44 (0) Internet:

2 VLT S INTELLIGENT TEST LANE CONCEPT VLT, a world-wide specialist in the field of vehicle testing, has introduced its Intelligent Test Lane Concept in 1995 and is continuously updating this concept, whereby Test Lanes are created for testing trucks, trailers, buses, cars and motor cycles. The main features of Test Lanes created with this concept are: short testing times, thereby enabling a large throughput of vehicles; objective, operator independent test results on most test items; accurate measurements; a large set of clear user instructions is displayed, which allows the owner/ driver to stay in the vehicle during the test, thus saving manpower; a wide selection of different test equipment for integration is available; a large number of settings, threshold values and standards can be accessed directly and edited by the user; the modular setup allows a complete variety of Test Lane configurations; easily upgradable by adding more test equipment items per lane; easily expandable by adding more Test Lanes; integration of Test Lanes on remote sites is possible; link up to Government database and remote access possibilities where applicable. The open structure of both hard- and software allows an easy integration of future test equipment and an easy adaption of the system to customers (future) wishes. The following equipment items are available in VLT s Test Lane concept: Vehicle Identification Station; Sideslip (=Alignment) Tester; Road Contact Suspension Tester; Brake Tester (for motor cycles combined with clamping device); Boogie (=free) Rollers; Speedometer Tester/Taxi Meter Tester/Speed Warning Device Tester/Aircon Tester; Chassis Dynamometer Smoke Tester; Noise Level Tester; Emission Tester for petrol engines; Diesel Smoke Tester for diesel engines; Above Carriage Inspection Panel / Tablet; Fully automated Headlight Beam Tester; Vehicle Position Monitor; Play Detector; Under Carriage Inspection Panel(s) / Tablet; Height Adjustable Floor Pit Lift; Test Result printer, Certificate Printer; Barrier, Traffic Light, Public Address, Closed Circuit TV and monitor systems;...and more. Due to constant product improvement and innovation, VLT reserves the right to make changes without prior notice. 2

3 VEHICLE INSPECTION STATION UNIQUE VLT FULLY INTEGRATED VEHICLE TEST LANE CONCEPT Why unique? The VLT Integrated Vehicle Test Lane works fully paperless Has a Vehicle Tracking System, this means the System handles three or more Vehicles at the same time in one lane and keeps the data and results of each Vehicle separate. VLT makes use of one Single Test Lane Computer per Test Lane Only one time Vehicle Data input, mostly only registration number is all you have to put in. The remaining data is retrieved from the Station Server Database. Unknown New Vehicles of the Database can be easily created by Menu on the Entry Console and/or on Reception. Pass or Fail decision is made by the Computer System, no human influence on vital inspections, like Brakes, Suspension, etc. etc. Very easy RETEST facilities, the VLT System knows the FAIL items of the previous inspection and commands the Vehicle straight to the selected Equipment(s). Time saving for every one, Operator and Vehicle owner as well. If Vehicle FAILS, a Full Test Report is printed out and gives the repair workshop all relevant information for repair and/ or adjustment. If Vehicle PASSES, a Vehicle Fitness Certificate can be printed, or if required a Window Sticker can be produced, or even your own special system can be adopted. VLT Develops, configures, manufactures, installs and hands over the entire Vehicle Testing System more or less as Turn-Key, including User and Maintenance training by VLT s own engineers, even All-In Maintenance and Repair over 5 to 10 years period can be contracted out to VLT. VLT has its own Software Engineering Department for Machine controlling Embedded Software and its PC Server application Software Development Department. Special Above- and Undercarriage inspection systems are developed by VLT, using special Membrane keyboards and/ or Touch Screen Monitors. VLT makes your own ideas work! You tell us what you want, we make it. VLT Test Lanes are known for extreme low maintenance and repair cost, this results in high availability of your Test Lane to serve your customers. 3

4 VLT ROAD CONTACT/SUSPENSION TESTERS VLT 3673/M - VLT 3673/MK2 VLT 3673/M AND VLT 3673/MK2 The Suspension Tester operates according to the wellknown EUSAMA principle. However, the diagnostic options are not restricted to the contents of this specification. In addition to the usual road contact values, the following values are also measured and displayed: the contact value difference, resonance frequency and wheel weight at minimum contact value, tyre pressure value, wheel weight and axle weight. There is a general final evaluation so that all these values do not have to be interpreted after every test. The Suspension Tester can be used in combination with a VLT Brake Tester. The two pieces of equipment are monitored by the same computer. A single display cabinet is used for the two pieces of equipment. The axle weight measured by the Suspension Tester is also used for the calculation of the brake efficiencies. Models with 22, 27 and 32 large TFT-LCD monitors with full colour display for information and results. The VLT 3673/MK2 the more advanced development of the VLT 3673/M fully based on the EUSAMA principle. The VLT 3673/MK2 has beside the EUSAMA the new developed phase shift included what made the EUSAMA measuring somewhat more flexible for the lower wheel weights of smaller vehicles. Further more the frequency at the VLT 3673/MK2 is controlled by a frequency inverter. VLT SUSPENSION TESTERS ARE DESIGNED TO IMPROVE SAFETY ON THE ROAD. MODELS FOR UP TO 2500 KG AXLE WEIGHT. Technical specifications: Model VLT 3673/M VLT 3673/MK2 Measuring principle Eusama Eusama + phase shift Motor power (2x) 3 kw 3 kw Measuring frequency 25-0 Hz 25-0 Hz Frequency regulated by frequency inverter no yes Vertical plate movement 6.0 mm 6.0 mm Max. testing axle weight 2500 kg 2500 kg Max. drive-over axle weight 5000 kg 5000 kg Dimensions of measurement plate (2x) 400 x 700 mm 400 x 700 mm Weight measuring system kg each wheel / kg per axle Dimensions of measurement unit (w x l x d) 2350 x 500 x x 500 x 255 Optional subframe VLT 3605/T2 VLT 3605/T2 Optional subframe for heavy lane VLT 3610/MR/T2 VLT 3610/MR/T2 VLT 3932/M, VLT 3933/M AND VLT 3934/M, FOR CARS AND LIGHT GOODS VEHICLES VLT supplies a wide range of Side Slip Testers for cars and light goods vehicles. Robust construction for a long life span, especially designed for their special purpose and specifications. The VLT Side Slip Testers are connected to a VLT Roller Brake Tester controller and displayed on the digital display or on a TFT-LCD monitor, depending on the configuration of the system. VLT SIDE SLIP TESTERS VLT 3932/M, VLT 3933/M and VLT 3934/M Technical specifications: Model VLT 3932/M VLT 3933/M VLT 3934/M Linear up to wheel load of (axle) 3500 kg (7000 kg) 3500 kg (7000 kg) 3500 kg (7000 kg) Maximum drive-over weight wheel (axle) 5000 kg (10000 kg) 5000 kg (10000 kg) 5000 kg (10000 kg) Dimensions of drive-over plate 650 x 700 mm 650 x 700 mm 650 x 700 mm Dimensions of compensation plate 195 x 700 mm 195 x 700 mm 195 x 700 mm Measuring range toe in / toe out -20 / 0 / +20 mm/m Contact sensor drive-in / drive-out no yes, one IN yes, two, one IN, one OUT Rigid counter plate opposite VLT VLT VLT Optional subframe VLT 3918 VLT 3919 VLT 3919 Due to constant product improvement and innovation, VLT reserves the right to make changes without prior notice. 4

5 VLT ROAD CONTACT SUSPENSION/ROLLER BRAKE TESTER COMBINATIONS VLT /M/E/22 TFT and VLT /M/P/22 TFT Standard model Technical specifications Roller Brake Testers: Model VLT /M/E/22 TFT VLT 2622/22/TFT VLT 5022/22/TFT Measuring range low Kgf Kgf Measuring range high Kgf Maximum axle weight with 50% braking 2500 kg 5000 kg Maximum axle weight with 70% braking 1750 kg 3500 kg Maximum drive-over weight 4000 kg 5500 kg Tes ng speed 5.0 km/h 4.2 km/h Dimensions of rollers 200 x 700 mm 200 x 860 mm Centre-to-centre rollers 375 mm 375 mm Rear roller raised by 30 mm 30 mm Minimum / maximum test width 800 x 2200 mm 880 x 2600 mm Motor power (2x) 3.8 kw 5.0 kw Electrical supply at 415 V, 3 Phase, 50 Hz 16 Amps delay 25 Amps delay Drive-over cover plates op onal op onal Infrared remote control standard standard Radio frequency remote control op onal op onal Printer and RS 232 interface standard standard Pedal force transmi er op onal op onal Op onal subframe VLT VLT Note: axle weight is measured by the Suspension Tester. Technical specifications Road Contact Suspension Testing System: VLT /M/P/22 TFT Model VLT 3673/M or VLT 3673/MK2 Measuring principle Eusama Eusama + pase shift Motor power (2x) 3.0 kw 3.0 kw Measuring frequency 25-0 Hz 25-0 Hz Freq. regulated by freq. inverter no yes Vertical plate movement 6.0 mm 6.0 mm Dim. of measurement plate (2x) 400 x 700 mm 400 x 700 mm Weight measuring system range kg each wheel / kg per axle Maximum drive-over weight 5000 kg 5000 kg Optional with Console VLT /M/E/22 TFT, VLT /M/P/22 TFT, VLT Road Contact Suspension / Roller Brake Testers as Stand-alone version. The most advanced solution to offer your Vehicle owners the service they expect from you as Service maintenance organization. This equipment is made for heavy use! Same as you find in the better equipped Vehicle Stations. Standard available with nice and clear 22 TFT Monitor in Console on Pedestal and wall console for Controller box and motor relays. Or as top model with stylish console with printer compartment and keyboard shelf. Really an eye catcher in your workshop. With the purchase of this combination you get the best equipment available in the market. The Road contact Tester operates according the well-known EUSAMA principle. No reference value needed, just give you the correct Safe / Unsafe conditions of the Vehicle. In addition to the usual road contact values, the following values are also measured and displayed: the contact value difference, resonance frequency and wheel weight at minimum contact value, tyre pressure value, wheel weight and axle weight. There is a general final evaluation so that all these values do not have to be interpreted after every test. This is indicated by means of green, orange and red icons. The Suspension Tester is used in combination with the Brake Tester. The two pieces of equipment are fitted in one single frame, monitored by the same computer. In our standard configuration we make use of a 22 TFT Monitor. The axle weight measured by the Suspension Tester is also used for the calculation of the brake efficiencies. The VLT 3673/MK2 is the more advanced development of the VLT 3673/M fully based on the EUSAMA principle. The VLT 3673/MK2 has, besides the EUSAMA principle, the new developed phase shift included which makes the EUSAMA measuring somewhat more flexible for the lower wheel weights of smaller vehicles. Further more the frequency at the VLT 3673/MK2 is controlled by an inverter. The above mentioned combinations can easily be extended with a VLT Side Slip Tester. We offer our VLT 3932 for stand-alone use and our VLT 3933 / 3934 for automatic Test Lane use. Technical specifications Side Slip Testers: Model VLT 3932/20 Linear up to wheel load of (axle) 3500 kg (7000 kg) Max. drive-over weight wheel (axle) 5000 kg (10000 kg) Dimensions of drive-over plate 650 x 700 mm Dimensions of compensation plate 195 x 700 mm Measuring range toe in / toe out -20 / 0 / +20 mm/m Contact sensor drive-in / drive-out no Rigid counter plate opposite VLT Optional subframe VLT 3918 Patent Pending 5

6 VLT ROLLER BRAKE TESTERS 2500/1750 KG AND 5000/3500 KG Series VLT 2622/22/TFT, VLT 2633/22/TFT, VLT 5222/22/TFT and VLT 5233/22/TFT VLT 2622/33 and VLT 5222/33 Roller Brake Testers These models are heavy duty and especially designed for the UK market but can be used all over the World. Special about these units is the reduced distance between the left and right roller pairs which allows testing of those light goods vehicles with dual tyres on the rear axle, and of course all cars and light goods vehicles. Available with standard 22 TFT-LCD monitor, as standalone or as fully automated Test Lane version. Options available at time of ordering Roller Brake Tester: VLT 2039 Opposite rotating of rollers (4x4) VLT 2538 or VLT 3538 Roller locking device (best option) op onal console Technical specifications: Class 3 and 4 Class 4 and 7 Model VLT 2622/22/TFT VLT 2633/22/TFT VLT 5222/22/TFT VLT 5233/22/TFT Measuring range low Kgf Kgf Kgf Kgf Measuring range high Kgf Kgf Max. axle weight with 50% braking 2500 kg 2500 kg 5000 kg 5000 kg Max. axle weight with 70% braking 1750 kg 1750 kg 3500 kg 3500 kg Maximum drive-over weight 4000 kg 4000 kg 5500 kg 5500 kg Axle weight measuring range kg kg Tes ng speed 5.0 km/h 5.0 km/h 4.2 km/h 4.2 km/h Dimensions of rollers 200 x 700 mm 200 x 700 mm 200 x 860 mm 200 x 860 mm Centre-to-center rollers 375 mm 375 mm 375 mm 375 mm Rear roller raised by 30 mm 30 mm 30 mm 30 mm Minimum / maximum test width 800 x 2200 mm 800 x 2200 mm 880 x 2600 mm 880 x 2600 mm Motor power (2x) 3.8 kw 3.8 kw 5.0 kw 5.0 kw Elect. supply at 415 V, 3 Phase, 50 Hz 20 Amps delay 20 Amps delay 25 Amps delay 25 Amps delay Facility for upgrading to VLT VLT Pedestal op onal op onal op onal op onal Drive-over cover plates op onal op onal op onal op onal Infrared remote control standard standard standard standard Printer and RS 232 interface standard standard standard standard Roller locking device (op onal) VLT 2538 VLT 2538 VLT 4238 VLT 4238 Pedal force transmi er op onal op onal op onal op onal Op onal subframe for concrete floor VLT 2605 T2 VLT 2605 T2 VLT 4205 T2 VLT 4205 T2 Model number for test lane configura on VLT 2622/TL VLT 2633/TL VLT 5222/TL VLT 5233/TL Due to constant product improvement and innovation, VLT reserves the right to make changes without prior notice. 6

7 VLT MOTOR CYCLE ROLLER BRAKE TESTERS Series VLT 0572/M/22 /TFT and VLT 0573/M/22 /TFT VLT 0572 AND VLT 0573 SERIES All new VLT motor cycle Roller Brake Testers, especially designed for high throughput inspection stations, are also available as standalone for the aftermarket. These can be used in workshops, motor clubs or police stations and as originally designed for inspection stations. This Roller Brake Tester is available as standalone unit with TFT-LCD monitor in 22 size and of course as part of a fully automated motor cycle inspection lane. (Standard) (Optional Console) Illustrated optional console, left top the standard readout. Motorcycle Roller Brake Tester with Wheel Clamping Devices. Pictures as installed in Automated Testlane. VLT 0554/EURO VLT 0573/M/22 /TFT VLT 0554/EURO Technical specifications: Model VLT 0572/M/22 /TFT VLT 0573/M/22 /TFT Measuring range Kgf Kgf Maximum wheel weight 750 kg 750 kg Maximum drive-over weight 1000 kg 1000 kg Tes ng speed 5.2 km/h 5.2 km/h Dimensions of rollers 260 x 350 mm 260 x 350 mm Centre-to-centre rollers 350 mm 350 mm Rollers raised by 40 mm* 40 mm* Motor power (2x) 2.7 kw 2.7 kw Electr. supply at 415 V, 3 Phase, 50 Hz 16 Amps 16 Amps Facility for upgrading to VLT 0573/M/22 /TFT - Weight measuring system range no kg Printer and RS 232 interface standard standard Op onal subframe for concrete floor VLT 0507/T2 VLT 0507/T2 Model number for test lane version VLT 0572/M/TL VLT 0573/M/TL * = above floor level. VLT 0553/EUR Motorcycle wheel clamping device with alignment for checking the frame of the motorcycle VLT 0554/EUR Motorcycle wheel clamping device, rigid VLT 0556 Special subframe to install in the concrete floor, for VLT 0553/EURO - VLT 0572/VLT 0573 and VLT 0554/EURO or two mes VLT 0554/EURO with VLT 0572/VLT 0573 VLT 0591 Hydraulic pump unit with controls for opera ng the clamping devices Note: when ordering the clamping devices and subframe, there is no need to order subframe VLT

8 VLT 2106 CARAVAN ROLLER BRAKE SIMULATOR WITH FLOOR RAIL (THE ORIGINAL) VLT 2810 CARAVAN ROLLER BRAKE SIMULATOR MOBILE UNIT FOR PRODUCTIVITY VLT Caravan Roller Brake Simulator VLT 2106 VLT Caravan Roller Brake Simulator VLT 2106 THE ORIGINAL CARAVAN ROLLER BRAKE SIMULATOR The VLT Caravan Roller Brake Simulator operates the brake mechanism on the triangle of the caravan. The Brake Simulator also holds the caravan in the roller sets of the Brake Tester. The mechanism in the Brake Simulator, which is activated by hand, Causes force through the coupling device on the overrun brake. This force is measured with a gauge and is displayed on the LED Display or Monitor of the Roller Brake Tester. A simulator locking rail must be ordered separately. Only in combination with VLT Light models Roller Brake Tester and for Heavy models with adapted software. Model VLT 2106 needs a rail to be concreted into the workshop floor: VLT Rail of 3 meter VLT Rail of 4 meter VLT Rail of 5 meter More than 25 years in the market, still actual! VLT Caravan / Trailer Roller Brake Simulator VLT 2810 (Mobile) NOW Available from VLT The All New Mobile Roller Brake Tester Caravan / Trailer Simulator VLT 2810 This Caravan Simulator does in fact the same as the Original Model VLT 2106, but there is no need to install the floor rails anymore. It can handle Light Trailers with overrun Brakes up to 3000kg. The VLT 2810 will be hooked on between the pulling Vehicle and The Caravan / Trailer. The Caravan can be picked up by the Simulator VLT 2810 from outside and bring the Caravan and Simulator up to the Roller Brake Tester, and after the Tests are completed bring the Caravan or Trailer back to the outside/parking area. Available for standard 50 mm ball coupling or for the open Nato Military coupling, or combination of both. Connection Simulator to Roller Brake Tester by cable or by wireless Radio Frequency. Ask for more information. PLAY DETECTOR SERIES FOR CARS AND LIGHT GOODS VEHICLES PLAY DETECTOR SERIES With our Play Detectors for cars and light goods vehicles, we offer our customers a high quality product with all possibilities to detect in no time play and wear on vehicles. Model /CR programmed cable remote control VLT 9033/PR/CR - VLT 9036/PR/CR Technical specifications: Model VLT 9032 VLT 9033/PR/CR VLT 9036/PR/CR VLT 9033/PR/RF VLT 9036/PR/RF Maximum axle weight 5000 kg 5000 kg 5000 kg Maximum wheel weight 2500 kg 2500 kg 2500 kg Total maximum movement 140 mm 140 mm 140 mm Maximum movement each side 70 mm 70 mm 70 mm Horizontal force, opposite 36 kn 36 kn 36 kn Horizontal force, on each plate 18 kn 18 kn 18 kn Special steering facilities no no yes Pit dimensions +/- 540 x 740 x 130 mm (2x) Upper plates dimensions 590 x 720 mm Motor power 2.2 kw Electrical supply 230 / 400 V, 3 Phase, 50 Hz Automated program cycles no yes yes Manual program yes yes yes Remote control / hand lamp by cable by cable radio frequency Movement of the plates 8 >16 > Subframe order no. all models VLT 9003/T2 Plate left Plate right VLT 9033PR and VLT 9036PR has Model / RF 16 movements of the plates programmed radio frequency remote control manual or automated program cycles VLT Due 9033/PR/RF to constant - product VLT 9036/PR/RF improvement and innovation, VLT reserves the right to make changes without prior notice. Plate left Plate right Our model VLT 9036PR has extra steering facilities to turn the wheel left and right 8

9 VLT PLAY DETECTORS VLT play detectors We offer our Extremely Heavy Tolerance Play Detectors with hydraulic aggregate. Large movements, low maintenance, easy to operate, mostly by radio frequency controlled remote control including models with automatic program cycles besides manual operation. Special model VLT 9054 PRC VLT supplies its special model VLT 9054 PRC, which has the same specifications as the VLT 9052 PR, but the hydraulic aggregate has an extra valve set for connection of one of the VLT Load Simulators. Plate left Plate right VLT 9052 PR offers manual or automated program cycles of more than 16 movements Plate left Plate right VLT 9043 has 8 movements of the plates Technical specifications: Model VLT 9043/EURO VLT 9052/PR/CR VLT 9054/PRC/CR Maximum axle weight kg kg kg Maximum wheel weight kg kg kg Total maximum movement 200 mm 200 mm 200 mm Maximum movement each side 100 mm 100 mm 100 mm Horizontal force, opposite 60 kn 60 kn 60 kn Horizontal force, on each plate 30 kn 30 kn 30 kn Cars, light goods vehicle program no yes yes Heavy goods vehicle, buses program yes yes yes Extra connection port for load simulator no no yes Special steering facilities no no no Pit dimensions all models 725 x 985 x 160 mm, use subframe VLT 9005/T2 or VLT 9006/T2 Motor power 3.0 kw Electrical supply 230 / 400 V, 3 Ph, 50 Hz Automated program cycles no yes yes Manual program yes yes yes Remote control / hand lamp by cable cable remote or radio frequency Movement of the plates 8 >16 >16 9

10 VLT AXLE LOAD SIMULATORS VLT AXLE load simulators (classic way) A range of three different Axle Load Simulators is available from 4000 kg kg and kg pulling force by two dual action hydraulic cylinders. These three models can be offered with their own hydraulic pump or can be connected to our VLT 9054 PRC Play Detector pump unit which has an extra valve set for connecting one of the Load Simulators. Load adjustment through proportional pressure regulated valve. Classic way VLT new way of load simulation Please see page 14 Load Simulation by use of RBT Lifting Device (page 14) Classic way Load Simulator Load Simulation by use of RBT Lifting Device (page 14) Technical specifications (classic load simulator): Model VLT VLT VLT Maximum pulling force 4000 kg 6000 kg kg Regulated between kg kg kg Cylinder diameter ø 60 mm ø 70 mm ø 90 mm Cylinder stroke 250 mm 250 mm 250 mm Number of cylinders Motor power 3.0 kw 3.0 kw 3.0 kw Electrical supply 415 V, 3 Ph, 50 Hz Maximum hydraulic pressure 100 bar 115 bar 100 bar Tie down type belts belts belts / chains Models for connec ng to VLT 9054 PRC Play Detector VLT VLT VLT Due Classic to way constant Load product Simulator improvement and innovation, VLT reserves the right to make changes without prior notice. 10

11 SPECIALLY DEVELOPED MODELS FOR THE UNITED KINGDOM MARKET Heavy goods vehicles, buses, trailers but also cars, vans and light goods vehicles can be professionally tested on our VLT and VLT models All our UK VLT and VLT series have applied brake test facilities and are fully computerized with infra-red remote control for the ONE man operation on the 16622/M5/HEAVY/CON and 16633/ M5/HEAVY/CON models. Our models VLT 16633/M5/ HEAVY/CON and VLT 16733/ M5/HEAVY/CON (the VOSA machine) are equipped with an 18 ton axle weighing system for fast and very accurate testing and diagnostic analyses of vehicle braking systems. We have our own factory trained service organisation for warranty and after-sales maintenance and calibration. The VLT 16622/M5/HEAVY/CON and VLT 16633/M5/ HEAVY/CON are computer controlled Roller Brake Testers with applied brake test facilities. Including large digitally controlled analogue meters with double measuring range and Kgf, with automatic scale selection. This RBT has two measuring directions and is equipped with applied brake test device, an IR remote control for one man operation and a wall mounted read-out cabinet. This unit is prepared for later installation of a weighing system. Technical specifications: Model VLT 16622/M5/HEAVY/P/CON VLT 16633/M5/HEAVY/P/CON Measuring range low kgf kgf Measuring range high kgf kgf Axle weight with 50% braking kg kg Maximum drive-over weight kg kg Tes ng speed 1.3 / 2.6 km/h 1.3 / 2.6 km/h Dimensions of rollers 260 x 1100 mm 260 x 1100 mm Centre-to-centre rollers 470 mm 470 mm All rollers raised by 40 mm 40 mm Motor power (2x) 5.5 / 11 kw 5.5 / 11 kw Electr. supply 63 Amps 63 Amps Roller locking device op onal standard Facility for extension to VLT 16633/M5/HEAVY/CON - Weight measuring system op onal kg Alphanumeric display 8-set (90 mm) 16-set (90 mm) Dimensions roller sets (2x) all models 1450 x 890 x 640 mm 11

12 VLT UK VEHICLE INSPECTORATE VLT 16733/M5/HEAVY/P/CON This unit can conduct the applied brake test and is the official Roller Brake Tester used by the Vehicle Inspectorate*. We offer you an identical system including the licence to use the VI data base with a PASS/FAIL assignment. We have manufactured and installed 162 units for the UK Vehicle Inspectorate, an Executive Agency of the Department of Transport and sold early 2012 approx more units to private companies. An ultra-modern HIGH TECH concept, developed by VLT in close co-operation with officials of the Vehicle Inspectorate. *Renamed to VOSA in Technical specifications: Model VLT 16733/M5/HEAVY/P/CON VLT 20733/M5/HEAVY/P/CON VLT 24733/M5/HEAVY/P/CON Measuring range low kgf kgf kgf Measuring range high kgf kgf kgf Axle weight with 50% braking kg kg kg Maximum drive-over weight kg kg kg Testing speed 1.3 / 2.6 km/h 1.3 / 2.6 km/h 1.15 / 2.3 km/h Dimensions of rollers 260 x 1100 mm 260 x 1100 mm 260 x 1800 mm Centre-to-centre rollers 470 mm 470 mm 470 mm All rollers raised by 40 mm 40 mm 40 mm Motor power (2x) 5.5 / 11 kw 5.5 / 11 kw 5.5 / 11 kw Electr. supply 80 Amps 80 Amps 80 Amps Weight measuring system kg kg kg Alphanumeric display 16 digits 16 digits 16 digits Computer database of approx. >12,700 vehicles Computer Dual core GHz, HDD 160 Gb, incl. Windows XP Professional Monitor TFT-LCD 19 On request available with lift VLT 16733/M5/HEAVY/P/CON/LIFT VLT 20733/M5/HEAVY/P/CON/LIFT VLT 24733/M5/HEAVY/P/CON/LIFT Due to constant product improvement and innovation, VLT reserves the right to make changes without prior notice. V L Test Systems Ltd. 3/4 Middle Slade Buckingham Ind. Park Buckingham Bucks MK18 1WA United Kingdom Due to constant product improvement and innovation, VLT Tel. reserves +44 (0) the 1280 right to make changes Fax without +44 (0) prior 1280 notice

13 SPECIAL ROLLER BRAKE TESTER DEVELOPED FOR MINISTRY OF DEFENCE VLT 20733/MOD and VLT 24733/MOD, both have NATO numbers VLT 20733/MOD Technical specifications: Model VLT 20733/MOD VLT 24733/MOD NATO stock number W3/ W3/ Measuring range low kgf kgf Measuring range high kgf kgf Axle weight with 50% braking kg kg Axle weighing system kg kg Maximum drive over weight kg kg Tes ng speed Applied Brake 1.3 km/h 1.15 km/h Tes ng speed Service Brake 2.6 km/h 2.3 km/h Tes ng speed Scondary Brake 2.6 km/h 2.3 km/h Dimensions of rollers 260 x 1100 mm 260 x 1800 mm Centre-to-centre rollers 470 mm 500 mm All rollers raised by 40 mm 40 mm Motor power (2x) 5.5 / 11 kw 5.5 / 11 kw Electrical supply 415 V, 3 phase 80 Amps 100 Amps Roller locking device standard standard Axle load simulator Yes, VLT no Li ing device roller pair no Yes, VLT 18245/130 Read out unit, movable Yes, 4 dials Yes, 4 dials Alphanumeric display 16 characters 90 mm 16 characters 90 mm Computer control unit PC with 19 TFT/LCD PC with 19 TFT/LCD Dimensions roller sets (2x) 1450 x 890 x 640 mm 2150 x 890 x 640 mm One and/or Two men opera on One and Two men One and Two men Note: More than 100 units have been supplied and installed to MOD sites worldwide by VLT. VLT 24733/MOD 13

14 ROLLER BRAKE TESTER LIFTING DEVICE FOR USING AS UNIVERSAL ROLLER BRAKE TESTER SUITABLE FOR NORMAL ROLLER BRAKE TESTING, FREELIFTING OF THE AXLE AND/OR AXLE LOAD SIMULATION ALL IN ONE For this Universal Roller Brake Tester, VLT has designed a special lifting device, installed under the roller sets, which gives this Roller Brake Tester all the flexibility you need. A. Normal brake testing like a standard Roller Brake Tester. B. Lifting one axle to increase the testing weight by factor 1 to 3. C. Use as Axle Load Simulator by tying down the axle or chassis by chain/belts and lifting the Lifting System by using the remote control the Roller Brake Tester to predetermined axle weight. Lifting device is available with a standard hydraulic pump or with an optional high speed hydraulic pump, both with proportional value system for accurate axle weight adjustment. VLT supplies this lifting device in combination with our heavy duty models VLT 16633, VLT 16733, VLT and VLT (special version). Models Roller Brake Tester suitable for using on lift: VLT 16633, VLT and VLT Heavy Duty Models. See pages 11, 12 and 13. Technical specifications lift system: Model LD 180 LD 180/2 Li ing capacity kg kg Li ing height 180 mm 180 mm Motor power 3 kw 3 kw Li ing me as li 11 sec 11 sec Li ing me as axle load simulator sec Subframe for RBT and li for pit VLT 16273/T2 VLT 16273/T2/P2 ubframe for RBT and li for non-pit installa on VLT 16276/T2 VLT 16276/T2/P4 Dummy set for later installation of Lift System VLT Due to constant product improvement and innovation, VLT reserves the right to make changes without prior notice. 14

15 VLT M5P CON.630 UK controller console read-out / display / kgf, control lights, 16 digits, 90 mm relay box, emergency stop (wall-mounted) roller sets, incl. roller locking device and axle weighing service brake, parking brake, applied test GEN/UK op onal pedestal, turn able column VLT 0955 Infrared UK remote control VLT M5P HEAVY CON.652B UK controller, TFT screen, keypad, control lights keyboard read-out / display / kgf, control lights, 16 digits, 90 mm GEN/UK relay box, emergency stop (wall-mounted) printer compartment PC compartment op onal pedestal, turn able column VLT (membrane keyboard) (standard keyboard) RF UK remote control roller sets, incl. roller locking device and axle weighing service brake, parking brake, applied test VLT M5P CON.655B UK controller, TFT screen, keypad, control lights keyboard printer compartment PC compartment 32 TFT/LCD monitor VLT 1832/W TFT LCD pedestal, VLT 0901 relay box, emergency stop (wall-mounted) (membrane keyboard) (standard keyboard) RF UK remote control roller sets, incl. roller locking device and axle weighing service brake, parking brake, applied test

16 ALL NEW VLT CHASSIS DYNAMOMETERS FOR PERFORMANCE MEASUREMENT AND DIESEL SMOKE TESTING UNDER ROAD CONDITIONS (CDST) VLT Chassis Dynamometers for Diesel Smoke Testing under Road Conditions (CDST). Diesel Smoke Testing by Free Acceleration Test is one! But how accurate is this Test? We all know that it is a not valuable test, but still better as none testing of Vehicle Diesel Engines. The results are not realistic in many cases. And not as good for the Engine we know. VLT knows that they are not the First Company to bring this kind of solution. But many of you know when VLT comes in the market it brings a High end solution! VLT offer you a range of three High Tec models, not less than that! VLT offer our special Cars and Light Vehicles model VLT (not illustrated), a 6 Ton axle weight Medium Duty model VLT , handling Light and Medium Vehicles, a 14 Ton axle weight Heavy Duty model VLT , handling Light, medium and Heavy Vehicles and the top of our Range is a 24 Ton Dual Drive version model VLT for Tandem axle dual drive Vehicles, and handles at the same time Light and Medium Vehicles. This Special model comes with a NEW revolutionary VLT Concept (Patent pending). All models are fully Computer Controlled VLT Solution for Diesel Smoke Testing under Road Conditions. Revolu onary design of the all new VLT Chassis Dynamometer VLT Truck on VLT Car on VLT with cooling fan VLT Tractor on VLT Tractor on VLT VLT Tandem axles on VLT Full speed on the VLT

17 TECHNICAL SPECIFICATIONS Model VLT VLT VLT VLT Maximum axle Load under test 3000 kg / 6600 lbs 6000 kg / lbs kg / lbs kg / lbs Maximum speed at axle load of 150 Km/hour at 3 ton 150 km/h at 6 ton 100 km/h at 14 ton 90 km/h at 24 ton Maximum speed at axle load of 175 Km/hour at 2 ton 175 km/h at 3 ton 120 km/h at 10 ton 100 km/h at 14 ton Maximum speed at axle load of 200 Km/hour at 1 ton 200 km/h at 2 ton 160 km/h at 6 ton 160 km/h at 6 ton Number of rollers Four (4) four (4) four (4) six (6) Roller diameter x length 320 x 700 mm 400 x 900 mm 400 x 1100 mm 400 x 1100 mm Vehicle axle lift capacity 4000 kg 7000 kg kg kg ** Roller inner / Roller outside dimensions 800 / 2200 mm 700 / 2500 mm 800 / 3000 mm 800 / 3000 mm Centre to centre Rollers 500 mm 550 mm 630 mm 630 mm Number of Eddy current brake(s) One (1) one (1) two (2) three (3) Maximum brake power 300 kw / 400 hp 300 kw / 400 hp 600 kw / 800 hp 750 kw / 1000 hp Number of hold / drive out disc brakes four (4) four (4) six (6) eight (8) Hydraulic pump for lift and hold brakes 1,5 kw 3 phase 3 kw - 3 phase 3 kw - 3 phase 3 kw - 3 phase Adjustable tandem axle rollers for wheelbases Not applicable not applicable not applicable mm Auxiliary cooling fan 380/400 Volt 3 phase ø500 mm 0.25 kw * ø630 mm kw * ø630 mm kw * ø630 mm kw * Note * dual speed ** tandem second axle does not need a Lift. Optional subframe for casting into concrete VLT 03806/T2 VLT 06806/T2 VLT 14806/T2 VLT 24806/T2 These subframes come with locking attachments to hold the vehicle in place during the test, ask for details. Additional Technical information on 24 Ton Dual Drive Model VLT : Suitable for the full Range of Vehicles (Excluding permanent four wheel drive Vehicles with wheelbase over 1550 mm) Designed for Heavy Vehicles 6x4, (6x6 if Front axle can be switched off) Heavy Vehicles and Buses 4x2. Also capable of testing CARS and Light Good Vehicles as well due to this Revolutionary design. Maximum Axle Load under Tandem axles: kg. Maximum Axle Load under Single axle: kg. Startup screen Pre-test ac ons screen Measurement screen End result screen Van on VLT with cooling fan Hydraulic system on VLT Eddy current brake Safety chains on VLT Tandem axle on VLT Li up on VLT

18 VLT EMISSION / DIESEL SMOKE TESTERS VLT 4588 MK2 AND VLT 4590 MK2 VLT FOUR-FIVE GAS EMISSION TESTER Portable VLT Multi Gas Emission Tester for Stand-alone use or as integrated part of Vehicle Test Lane. Extendable with Diesel Smoke Cell. Robust State of Art Multi gas exhaust analyzer for intensive use. Meet the highest standards and demands of today and tomorrow. This fully digital infrared gas bench technology provides rapid analyses of a vehicle performance and pollutions. Designed as user friendly analyzer for mandatory vehicle testing and fault diagnosis of Petrol LPG and CNC vehicle emissions. VLT DIESEL SMOKE TESTER VLT 4590 MK2 Portable VLT Diesel Smoke Tester for Stand-alone use or as integrated part of Vehicle Test Lane. VLT offers you with this new developed most advanced Diesel Engine Analyzer for Testing Commercial Vehicles, Buses as well Cars an Taxi s. Make use of the latest digital proccesser technology to ensure that Smoke Emission Levels are measured quickly and accurately. We make use off well known High quality, aluminium 430 mm smoke cell for repeatability of measurements in combination with a minimum of maintenance. Standard features: Complies with the latest standards. OIML Class O accuracy CE approved. Quick and easy operation. Test Petrol LPG and CNG Engines. 6 Clear 4 digit LED displays. Integrated thermal printer. RPM and Oil temperature measurement. Step by step test routines. Ready to connect up Diesel Smoke Cell. Technical specifications VLT 4588 MK2 Emission Tester: Model: VLT 4588 MK2 Stand-alone : yes, optional Test Lane module. Power input : 230 V -10% + 15% Max. power: : 70 Watt RPM : /min. Optional Diesel Smoke Cell: CO : 0-10 vol. % Model : VLT 4595 MK2 CO2 : 0 20 vol. % Opacity :0 99% / M -1 HC : vol. ppm Exhaust probe : 4,5 meter Ø 16 mm O2 : 0 25 vol. % Heat up power: : 330 Watt maximum Lambda : Measuring cell temp. : 100 C NOx optional : vol. % Standard features: Complies with the latest standards. CE approved. Quick and easy operation. Test passengers cars Taxi s as well Commercial Vehicles and Buses. 6 Clear 4 digit LED displays. Integrated thermal printer. Fast warm up with automatic zero and Weekly calibration check. Technical specifications VLT 4590 MK2 Diesel Smoke Tester: Model: VLT 4590 MK2 Stand-alone : yes, optional Test Lane module. Power input : 230 V -10% + 15% Heat up power: : 330 Watt maximum Standby power : 10 Watt Opacity : 0 99% / M -1 Exhaust probe : 4,5 meter Ø 16 mm Oil temperature sensor : C Measuring cell temp. : 100 C Weight of unit : approx. 10 kg. Diesel Smoke Cell standard for VLT 4590 MK2 optional for VLT 4588 MK2 as VLT 4595 MK2 Optional Trolley VLT 5921/08 18

19 VLT AIR PRESSURE TRANSMITTERS, VLT PEDAL FORCE TRANSMITTERS, VLT HYDRAULIC PRESSURE TRANSMITTERS New Radio Frequency Transducers for Air Pressure, Pedal Force and Hydraulic Pressure. We are proud to offer you our recently developed new range of transducers, special for Air Pressure Measurement of Air Brakes Systems. We can offer very Basic Systems with only two, three, four, etc. Air Transducers up to Three Sets up to six (6) Air Transducers in one Vehicle Test Lane. This is very efficient at Vehicle Test Lanes with high throughput. We can supply you special sets for me measurement of raise and fall me of Air Pressure in Air Brake Systems of Tractor - Trailer Combina ons and other Vehicles. Low cost Cable Transducer TECHNICAL SPECIFICATIONS AS low cost version we offer you our cable connected Transducers VLT VLT 1043 and VLT VLT 1032 Pedalforce Range Newton Cable length 12 meters VLT 1043 Hydraulic pressure Range BAR Cable length 16 meters VLT 1063 Air pressure Range 0-20 BAR Cable length 16 meters Combination Sets Air Pressure Transducers: VLT 1072/M contains: 1 (one) Basic MPU Controller kit 2 (two) R.F. Air Pressure Transducers VLT 1064/M VLT 1073/M contains: VLT 1074/M contains: VLT 1075/M contains: VLT 1076/M contains: 1 (one) Basic MPU Controller kit 3 (three) R.F. Air Pressure Transducers VLT 1064/M 1 (one) Basic MPU Controller kit 4 (four) R.F. Air Pressure Transducers VLT 1064/M 1 (one) Basic MPU Controller kit 5 (five) R.F. Air Pressure Transducers VLT 1064/M 1 (one) Basic MPU Controller kit 6 (six) R.F. Air Pressure Transducers VLT 1064/M Special configurations for Vehicle Test Lanes use. For example with a total of 12 (twelve) Air Transducers, easily to configure by yourself in two or three kits of or 6. Very flexible and easy to use. VLT 10712/M contains: 1 (one) Basic MPU Controller kit 12 (twelve) R.F. Air Pressure Transducers VLT 1064/M Any other configuration and number of Air Transducers up to 18 possible. (Please ask us) VLT 1075/M Combination Sets Pedal Force and Air Pressure Transducers: VLT 1082/M contains: 1 (one) Basic MPU Controller kit 1 (one) R.F. Pedal Force Transducer VLT 1034/M 1 (one) R.F. Air Pressure Transducers VLT 1064/M VLT 1083/M contains: VLT 1084/M contains: VLT 1085/M contains: VLT 1086/M contains: 1 (one) Basic MPU Controller kit 1 (one) R.F. Pedal Force Transducer VLT 1034/M 2 (two) R.F. Air Pressure Transducers VLT 1064/M 1 (one) Basic MPU Controller kit 1 (one) R.F. Pedal Force Transducer VLT 1034/M 3 (three) R.F. Air Pressure Transducers VLT 1064/M 1 (one) Basic MPU Controller kit 1 (one) R.F. Pedal Force Transducer VLT 1034/M 4 (four) R.F. Air Pressure Transducers VLT 1064/M 1 (one) Basic MPU Controller kit 1 (one) R.F. Pedal Force Transducer VLT 1034/M 5 (five) R.F. Air Pressure Transducers VLT 1064/M Note: Each VLT 1034/M and or VLT 1064/M comes with one emergency cable in case flat battery. Note: Each VLT 1064/M comes with one emergency cable in case flat battery. 19

20 VLT YOUR PARTNER FOR VEHICLE TESTING EQUIPMENT WORLD WIDE Sales and service in United Kingdom: VL Test Systems Ltd. 3/4, Middle Slade Buckingham Bucks MK18 1WA, United Kingdom Tel. +44(0) , Fax +44(0) Design - Production and Worldwide Export: Van Leeuwen Test Systems B.V. Nieuwe Donk 18, 4879 AC Etten-Leur, Netherlands Tel. +31(0) , Fax +31(0) Van Leeuwen Test Systems B.V. Belgium Antwerpsesteenweg 275, bus Mechelen, Belgique Tel. +32 (0) , Fax +32 (0) V L Test Systems Malaysia Sdn Bhd 63, Jalan TPK 2/8 Taman Perindustrian Kinrara Section 2, Puchong KL Selangor Darul Ehsan Malaysia VL Test Systems Ltd, your supplier for all kinds of Vehicle Testing Equipment fully developed and manufactured in our own factory in the Netherlands. V L Test Systems Ltd is the only manufacturer and supplier of Vehicle Test Equipment for safety and Emissions equipment in the UK that relies 100% on its own nationwide service network of factory trained engineers (we do not use sub contractors or third parties) and is therefore able to offer the best service response to support your valuable purchase of VLT Equipment. VLT Equipment is well known to be Modern Robust Workshop & User Friendly with VLT software and solutions Low in maintenance cost but High Quality. We are aware that High Quality Equipment still needs maintenance and calibration to keep it in peak condition and suitable for official testing and V L Test Systems has a team of Factory Trained Engineers available using modern fully equipped service vehicles as pictured above. V L Test Systems Ltd are much more than Sales alone we are your strategic partners for vehicle testing and to support your VLT purchase long term. VL Test Systems Far East Pte. Ltd 29 Mandai Estate Tower 3 #06-02 Innovation Place Singapore Tel , Fax Van Leeuwen Test Systems B.V. Dubai Branch Branch Office Dubai (U.A.E.) Dubai Investments Park (DIP) Tel Due to constant product improvement and innovation, VLT reserves the right to make changes without prior notice. Internet: 20

VLT INTEGRATED VEHICLE TESTLANES

VLT INTEGRATED VEHICLE TESTLANES 2012-2015 Sign of Quality VLT INTEGRATED VEHICLE TESTLANES Automobile Safety Tes ng Equipment Nieuwe Donk 18 4879 AC E en-leur The Netherlands Tel. +31 (0)76 5029911 Fax +31 (0)76 5016731 Internet: www.vltest.com

More information

INTRODUCTION WHAT IS MOST IMPORTANT WHEN SELECTING VEHICLE TEST LANE SYSTEMS?

INTRODUCTION WHAT IS MOST IMPORTANT WHEN SELECTING VEHICLE TEST LANE SYSTEMS? 1 INTRODUCTION Van Leeuwen Test Systems B.V., shortly known as VLT, has a track record of over 57 years and is today one of the few companies which supplies State of the Art Vehicle Testing Equipment combined

More information

Software Features of Auto Gas Gas Analyzer Features HC, CO, CO2, Lambda, Air Fuel, NOx. Has optional RPM and Oil Temp.

Software Features of Auto Gas Gas Analyzer Features HC, CO, CO2, Lambda, Air Fuel, NOx. Has optional RPM and Oil Temp. Auto Gas Ultimate Model Shown Above Software Features of Auto Gas Gas Analyzer Features HC, CO, CO2, Lambda, Air Fuel, NOx. Has optional RPM and Oil Temp. Durable high strength aluminum case with all of

More information

Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.

Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com. IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation

More information

REFERENCE BOOK FOR: AREX WINDOWS GC SYSTEMS

REFERENCE BOOK FOR: AREX WINDOWS GC SYSTEMS REFERENCE BOOK FOR: AREX WINDOWS GC SYSTEMS AREX TEST SYSTEMS BV VENNESTRAAT 4B 2161 LE LISSE HOLLAND Product of: Arex Test Systems bv Vennestraat 4b 2161 LE Lisse Holland Tel: +31-(0)252-419151 Fax: +31-(0)252-420510

More information

RECOMMENDATION N 7. APPENDIX 3 Minimum equipment recommended for a compulsory periodic inspection in the developing countries

RECOMMENDATION N 7. APPENDIX 3 Minimum equipment recommended for a compulsory periodic inspection in the developing countries Ref.: C:\CITA\RECOMM\6e - page 1/5 RECOMMENDATION N 7 INSPECTION STATION EQUIPMENT 1. STATIONARY EQUIPMENT 2. PORTABLE INSPECTION APPARATUS APPENDIX 1 APPENDIX 2 1. Building 2. Areas for parking and special

More information

PLM series Permanent load lifting magnets

PLM series Permanent load lifting magnets Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever

More information

InfplusWin OPERATING MANUAL

InfplusWin OPERATING MANUAL InfplusWin OPERATING MANUAL Edition: October 2010. Vers. 1.70 ASSEMBLAD - Technical office - Automotive Division Inf-Win170ManGB GB 1 Index 1 INFPLUS-WIN SOFTWARE...3 1.1 INSTALLATION...3 2 INFPLUS-WIN

More information

HIGH PRODUCTION DUAL DRIVE HORIZONTAL MACHINING CENTER

HIGH PRODUCTION DUAL DRIVE HORIZONTAL MACHINING CENTER HIGH PRODUCTION DUAL DRIVE HORIZONTAL MACHINING CENTER 14001 認 可 登 錄 14001 認 可 登 錄 1 Introducing all new H630B high speed horizontal machining center. Incorporates state of the art Dual Drive technology

More information

Vehicle Testing by RTA

Vehicle Testing by RTA Vehicle Testing by RTA In alignment with its vision to ensure Safe and Smooth Transport for all, Roads and Transport Authority (RTA) launched many Vehicle Testing Centers (VTC) all around the emirate of

More information

Legal Requirements for. Motor Vehicles and Trailers. according to ECE Regulation 48. Our Ideas, Your Success. Customized Solutions

Legal Requirements for. Motor Vehicles and Trailers. according to ECE Regulation 48. Our Ideas, Your Success. Customized Solutions Innovative Technologies Customized Solutions Intensive Support Our Ideas, Your Success. Legal Requirements for Motor Vehicles and Trailers according to ECE Regulation 48 Ideas today for the cars of tomorrow

More information

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Electric Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed 4 wheel

More information

JCB Fastrac in Heavy Goods Vehicle Applications

JCB Fastrac in Heavy Goods Vehicle Applications JCB Fastrac in Heavy Goods Vehicle Applications Agricultural or General Haulage? Alan Mendelson JCB Consultant Introduction The JCB Fastrac is an instantly recognisable modern agricultural tractor. It

More information

A U T O M O T I V E L I F T S

A U T O M O T I V E L I F T S Q U A L I T Y Y O U E X P E C T AT A P R I C E Y O U W O U L D N T T H E S TA N D A R D I N I N F O R M AT I O N, E Q U I P M E N T A N D D I A G N O S T I C S S Y S T E M S h t t p : / / d i a g n o s

More information

hybrid fuel cell bus

hybrid fuel cell bus hybrid fuel cell bus PURE EMOTION PURE capacity The full passenger capacity of a standard diesel bus seats 34 standees 70 (7 passengers per sqm) total 104 Thanks to the three axles of the Van Hool A330

More information

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave

More information

Procurement Specification for a High Security Lift Arm Barrier (HSLAB) EB950 CR Armstrong High Security Lift Arm Barrier

Procurement Specification for a High Security Lift Arm Barrier (HSLAB) EB950 CR Armstrong High Security Lift Arm Barrier Procurement Specification for a High Security Lift Arm Barrier (HSLAB) EB950 CR Armstrong High Security Lift Arm Barrier A. Requirement This document is to be used to specify the physical and operational

More information

Worldwide network in over 40 countries.

Worldwide network in over 40 countries. Worldwide network in over 40 countries. April 2012 56 rue de Neuilly 93136 Noisy le Sec Cedex - France Tel : +33 (0)1 49 42 72 95 Fax : +33 (0)1 48 44 00 02 E-mail : contact@ptc.fayat.com PTC s vibrodrivers

More information

S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg

S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation

More information

LIFT CONTROL SYSTEMS CATALOGUE 2007

LIFT CONTROL SYSTEMS CATALOGUE 2007 LIFT CONTROL SYSTEMS CATALOGUE 2007 All Your Needs For Elevators INDEX 1. Lift Control Cards... 3 2. Speed Control Units... 7 3. Emergency Rescue Cards... 8 4. Lift Control Panels... 10 5. Photocells...

More information

VeHiCle diagnostics the autocom way

VeHiCle diagnostics the autocom way VeHiCle diagnostics the autocom way CaRs trucks generic a Complete diagnostic solution CDP+ is a quick and reliable diagnostic tool serving as a link between vehicle and computer. It works on both old

More information

5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.

5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no. 5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model

More information

LIFT CONTROL SYSTEMS CATALOGUE 2007

LIFT CONTROL SYSTEMS CATALOGUE 2007 LIFT CONTROL SYSTEMS CATALOGUE 2007 All Your Needs For Elevators INDEX 1. Lift Control Cards... 3 2. Speed Control Units... 7 3. Emergency Rescue Cards... 8 4. Lift Control Panels... 10 5. Photocells...

More information

Electric Forklift Trucks Capacity 5000 and 6000 lbs. RX60-25C and RX60-30C SERIES RX60

Electric Forklift Trucks Capacity 5000 and 6000 lbs. RX60-25C and RX60-30C SERIES RX60 Electric Forklift Trucks Capacity 5000 and 6000 lbs. RX60-25C and RX60-30C SERIES RX60 Safety To adapt to different operating conditions and customer requirements, all performance parameters are adjustable.

More information

2. Crane standing on firm, horizontal ground.

2. Crane standing on firm, horizontal ground. The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom

More information

in widespread use with Simplex sister Company, Simplex Onsite, providing nationwide load bank rentals.

in widespread use with Simplex sister Company, Simplex Onsite, providing nationwide load bank rentals. 600KW - 1250KW Overview Integrated design, load module, trailer, reels, cam-lock style connections, digital control High capacity, 600-1250kw Dual voltage: 208-240/416-480vAC Digital load control, 5 kw

More information

Process Alarm Solutions

Process Alarm Solutions Process Alarm Solutions Reliable Supervision and Control www.selco.com SELCO flexible alarm panels for supervision and control SELCO provides efficient and reliable solutions for alarm monitoring of electrical

More information

Brake module AX5021. Documentation. Please read this document carefully before installing and commissioning the brake module!

Brake module AX5021. Documentation. Please read this document carefully before installing and commissioning the brake module! Documentation Brake module AX5021 Please read this document carefully before installing and commissioning the brake module! Version : 1.2 : 2012.03.05 Date Article-no. : TDmlAX-5021-0000-0200 Page 2/8

More information

EXPORT w w w. k r a n m a n. c o m

EXPORT w w w. k r a n m a n. c o m EXPORT Kranman T1700 4WD series for ATV. Hydraulic unit KS-780 Facts: standard equipped T1700 Trailer T1700 4WD Total width 1.340 mm 4WD drive Hydraulic Total length 3000-3900 mm Pivoting stays 4 Load

More information

AUTOMATIC HYDRAULIC DRILLING RIGS HH Series HH Series hydraulic hoist series The drilling industry is actively involved in developing new technologies to solve common problems, such as increasing safety

More information

Designed for multi-injector endurance testing, the

Designed for multi-injector endurance testing, the Designed for multi-injector endurance testing, the ETB Test Bench can optionally provide shot-to-shot mass measurement. The injectors are precisely subject to variable controls and hydraulic pressures

More information

The Fundamentals of Spring Testing

The Fundamentals of Spring Testing The Fundamentals of Spring Testing starrett.com Starrett SMS Series A Better Solution for Testing and Measuring Compression and Extension Springs INTRODUCTION The design, manufacture and use of springs

More information

Poor quality welds Machine downtime High maintenance costs Lost revenue

Poor quality welds Machine downtime High maintenance costs Lost revenue w e l d m o n i t o r i n g Weld Checkers Multi-Function Weld Monitors Weld Thru Current & Force Miniature & Handheld Weld Checkers Electronic Force Gauges Displacement Monitors PC Data Collection High

More information

G-Wagon 280 CDI 4x4. Mercedes-Benz Military Vehicles.

G-Wagon 280 CDI 4x4. Mercedes-Benz Military Vehicles. G-Wagon 280 CDI 4x4. Mercedes-Benz Military Vehicles. G-Wagon: Combat proven. Mission adaptable. The Vehicle of Choice. More than 60,000 Mercedes-Benz G-Wagons have been sold to military customers worldwide

More information

Hydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l

Hydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity

More information

SUSPENSION AND STEERING OVERVIEW

SUSPENSION AND STEERING OVERVIEW SUSPENSION SUSPENSION AND STEERING OVERVIEW The S40/V50 has a wide track and a long wheelbase for its relative size and weight. This gives the car stable and predictable driving characteristics. It also

More information

NEW! Ingeniously Simple. ESI[tronic] 2.0 the New Diagnostics Software from Bosch

NEW! Ingeniously Simple. ESI[tronic] 2.0 the New Diagnostics Software from Bosch NEW! Ingeniously Simple. ESI[tronic] 2.0 the New Diagnostics Software from Bosch Universal: ESI[tronic] 2.0 Diagnosis, troubleshooting, repair, and maintenance Vehicle diagnosis with active troubleshooting:

More information

Compaq Rack Options and Accessories. Monitors and Keyboards

Compaq Rack Options and Accessories. Monitors and Keyboards 1 Compaq Rack Options and Accessories Compaq offers a wide variety of rack options and accessories that help you to complete your 9000 and 10000 series racks. Monitors and Keyboards TFT5600RKM United States

More information

Volvo 7700 Hybrid. Getting there by Hybrid. Technology

Volvo 7700 Hybrid. Getting there by Hybrid. Technology Volvo 7700 Hybrid Getting there by Hybrid Technology the green challenge Authorities all over the world set strict environmental boundaries for public transports. Energy use, pollution and global warming

More information

for vehicle measuring

for vehicle measuring 2/3D ELECTRONIC MEASURING GAUGE Electronic 2/3D tram gauge for vehicle measuring Technology from FINLAND MEASURING SYSTEMS 2/3D ELECTRONIC MEASURING GAUGE Electronic 2/3D tram gauge for vehicle measuring

More information

Light-Duty Vehicle Purchase Approval Form

Light-Duty Vehicle Purchase Approval Form Light-Duty Vehicle Purchase Approval Form Attachment II Requestor Name: Date: (As of date of application for vehicle to be replaced) Replacement (R) / New (N): (Enter R or N) Mileage (km): Department:

More information

The Complete KASTO Program: Economic Sawing and Storing of Metal.

The Complete KASTO Program: Economic Sawing and Storing of Metal. The Complete KASTO Program: Economic Sawing and Storing of Metal. Expertise right down the line. For over 170 years, KASTO has been recognized for quality and innovation, and offers a complete range of

More information

SHARP SVL 4525 LINEAR WAY VERTICAL MACHINING CENTER

SHARP SVL 4525 LINEAR WAY VERTICAL MACHINING CENTER SHRP SVL 4525 LINER WY VERTICL MCHINING CENTER PRECISION MCHINE TOOLS Sharp Industries, Inc. 3501 Challenger Street Torrance, C 90503 Tel 310-370-5990 Fax 310-542-6162 Email: info@sharp-industries.com

More information

Electric Powered Forklift 1.5-2.0 ton

Electric Powered Forklift 1.5-2.0 ton Electric Powered Forklift 1.5-2.0 ton E4 C4E150 C4E160-180 C4E160L-180L C4E200 www.bt-forklifts.com Electric Powered Forklift 1.5 ton Truck specifications C4E150 1.1 Manufacturer BT 1.2 Model C4E150 1.3

More information

18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS

18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS 18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre

More information

ENGINE POWERED 5-10t. ~ r"." - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100

ENGINE POWERED 5-10t. ~ r. - )5 F-ii'iii;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 HELl ENGINE POWERED 5-10t I; ~ r"." d- - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 STANDARD SPECIFICATION Manufacturer HUI HELl ca., LTD. Model CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 Load Capacity

More information

Precise heavy-duty cutting

Precise heavy-duty cutting PR 130 / PR 150 / PR 160 / PR 180 / PR 200 / PR 260 Precise heavy-duty cutting P-SERIES K-SERIES T-SERIES MILLFORCE 02 / Fields of application 03 / Machine concept 04 / Machine technology 05 / Options

More information

301.7D. Mini Hydraulic Excavator

301.7D. Mini Hydraulic Excavator 301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb

More information

LOT 3 TECHNICAL SPECIFICATIONS + TECHNICAL OFFER. Contract title: Technical supply of capacity building component (LOT 3)

LOT 3 TECHNICAL SPECIFICATIONS + TECHNICAL OFFER. Contract title: Technical supply of capacity building component (LOT 3) LOT 3 ANNEX II + III : TECHNICAL SPECIFICATIONS + TECHNICAL OFFER Contract title: Technical supply of capacity building component (LOT 3) Publication reference : KIAMB/II/02 LOT 3 Column -2 should be completed

More information

THE OPTIMAL SOLUTION FOR SMALL AND MEDIUM DATA CENTER

THE OPTIMAL SOLUTION FOR SMALL AND MEDIUM DATA CENTER Your Complete Turnkey Server Room Air Condition UPS THE OPTIMAL SOLUTION FOR SMALL AND MEDIUM DATA CENTER AVAILABLE IN WATER AND GAS SYSTEM MODEL AIR-CONDITIONED CABINET EXCELLENT TEMPERATURE CONTROL FOR

More information

INTERLOCK PALLET RACKING SYSTEM. The complete range of Pallet Racking Solutions

INTERLOCK PALLET RACKING SYSTEM. The complete range of Pallet Racking Solutions INTERLOCK PALLET RACKING SYSTEM The complete range of Pallet Racking Solutions The SCHAEFER Group Since its inception in 1937 by Mr. Fritz Schaefer, SSI SCHAEFER has been one of the world's leading suppliers

More information

MANAGEMENT SOLUTION (P.A.M.S.)

MANAGEMENT SOLUTION (P.A.M.S.) DOORKING SYSTEMS ACCESS CONTROL SOLUTIONS PERIMETER ACCESS MANAGEMENT SOLUTION (P.A.M.S.) Revision N, updated 01.12 PERIMETER ACCESS MANAGEMENT SOLUTION (P.A.M.S.) Design Concept How the System Works TYPICAL

More information

FT-1000/GPS-N. System of remote monitoring and control of physical

FT-1000/GPS-N. System of remote monitoring and control of physical FT-1000/GPS-N System of remote monitoring and control of physical Localization of vehicles during transport by sending the values of temperature, RH%, etc.. with relative alarm threshold is exceeded. Send

More information

Specifications 860-10000KN

Specifications 860-10000KN Specifications 860-00 HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 201608-IV NINGBO

More information

Overview - Danfoss Link and living software versions

Overview - Danfoss Link and living software versions Danfoss Link CC Mk II (with minisd card) software..35.3.7.4.5 0--00 The initial Danfoss Link CC software: Supports all features from the original Devilink software. New functionality providing control

More information

PPM Users Manual Signature Software 01-12-00

PPM Users Manual Signature Software 01-12-00 PPM Users Manual Signature Software 0-2-00 PPM User Manual /8/02 Software Versions: 0.0.27 Contents. Introduction 2 2. Parameters 3 2. Overload Limit...4 2.2 Relative Upper Limit...4 2.3 Relative Lower

More information

SPACIOUS CABIN TEMPERATURE TELESCOPIC

SPACIOUS CABIN TEMPERATURE TELESCOPIC THE ISEKI DIFFERENCE When you choose Iseki, you re not simply buying a tractor, you re investing in 80 years of industry-leading engineering and manufacturing experience. Experience that continues to produce

More information

Fleet Technician I Fleet Technician II Fleet Technician III

Fleet Technician I Fleet Technician II Fleet Technician III Fleet Technician I Fleet Technician II Fleet Technician III DEFINITION Under general supervision (Fleet Technician I) or direction (Fleet Technician II and III), perform skilled repairs and preventive

More information

This is us. Passionate about Apprenticeships.

This is us. Passionate about Apprenticeships. Technical TRAINING This is us The Manchester College is the only assessment centre in the UK that can offer all levels and disciplines of irtec licensing. We can assess you for a licence at any of the

More information

160 ATJ 180 ATJ. 16,25 m (160 ATJ) 17,65 m (180 ATJ) 9,10 m (160 ATJ) 10,60 m (180 ATJ)

160 ATJ 180 ATJ. 16,25 m (160 ATJ) 17,65 m (180 ATJ) 9,10 m (160 ATJ) 10,60 m (180 ATJ) 160 ATJ 180 ATJ 160 ATJ 180 ATJ MANITOU, the world leader in materials handling, has the ability to accompany you on all types of terrain. The 160 and 180ATJ models have been developed to respond to all

More information

18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS

18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS 18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS SKATES LIFTING TABLES HAND TROLLEYS PLATFORM HAND TRUCKS SKATES SKATE 1500KG for moving machines and equipment duration oiled metal wheels

More information

ŠKODA Rapid Petrol engines

ŠKODA Rapid Petrol engines ŠKODA Rapid Petrol engines Technical specifications 1.2 MPI/55 kw 1.2 TSI/63 kw 1.2 TSI/77 kw 1.6 MPI/77 kw 1.6 MPI/77 kw (A) 1.4 TSI/90 kw (A) Engine Engine type turbocharged petrol petrol engine, in-line,

More information

Emission Testers. for Diesel, Gasoline and Gas Engines. Model: MET 6.3 MET 6.1 MET 6.2 Export MDO2 LON MGT5 DITEST SPEED 2000 RPM VC2

Emission Testers. for Diesel, Gasoline and Gas Engines. Model: MET 6.3 MET 6.1 MET 6.2 Export MDO2 LON MGT5 DITEST SPEED 2000 RPM VC2 Emission Testers for Diesel, Gasoline and Gas Engines Model: MET 6.3 MET 6.1 MET 6.2 Export MDO2 LON MGT5 DITEST SPEED 2000 RPM VC2 Image: TÜV-NORD AG Dynamometers, Diagnostic Units, Emission Testers Emission

More information

Series. Laser air Leddura Lexinus Mensa. 70 inch. Smart innovation! When function matters.

Series. Laser air Leddura Lexinus Mensa. 70 inch. Smart innovation! When function matters. Leddura Lexinus Mensa Series When function matters. High quality displays suitable for all applications. Stay connected to your audience via the built-in wireless access point for a productive and collaborative

More information

reach trucks UNS/UHS, USS, UFS & URF Nissan Forklift Europe B.V. http://www.nissan-nfe.com CEN-RT-NFE/05-08-5000 Printed in the Netherlands

reach trucks UNS/UHS, USS, UFS & URF Nissan Forklift Europe B.V. http://www.nissan-nfe.com CEN-RT-NFE/05-08-5000 Printed in the Netherlands UNS/UHS, USS, UFS & URF reach trucks Nissan Forklift Europe B.V. http://www.nissan-nfe.com CEN-RT-NFE/05-08-5000 Printed in the Netherlands Nissan Motor Co., Ltd. reserves the right to make any changes

More information

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400

More information

TRITON V. Cylinder Pressure Monitoring CPM 500. Replaces mechanical indicators on diesel engines. Improves combustion

TRITON V. Cylinder Pressure Monitoring CPM 500. Replaces mechanical indicators on diesel engines. Improves combustion TRITON V Cylinder Pressure Monitoring CPM 500 Replaces mechanical indicators on diesel engines Improves combustion Reduces fuel consumption and emissions Optimises engine settings Engine & Turbine Management

More information

BARRIER LIFT SYSTEM 2 BARRIER LIFT SYSTEM

BARRIER LIFT SYSTEM 2 BARRIER LIFT SYSTEM BARRIER LIFT SYSTEM BARRIER LIFT SYSTEM The crash rated elkosta Barrier Lift System BLS offers maximum security for highly sensitive entry or exit points against unauthorised vehicles attempting to break

More information

Highly efficient flue gas analyzer

Highly efficient flue gas analyzer Highly efficient flue gas analyzer testo 320 Just a few clicks away from a heating system diagnosis O 2 High-resolution colour graphic display Quick and easy menu structure Storage space for 500 measurement

More information

Electrical Systems - IQAN Digital Control System. IQAN Control System Components... 5.1.3

Electrical Systems - IQAN Digital Control System. IQAN Control System Components... 5.1.3 Section 5.1 Electrical Systems - IQAN Digital Control System IQAN Control System Components........................... 5.1.3 IQAN Operational Description: At Machine Startup.....................................

More information

Petrol engines. Technical specifications 1.4 MPI/59kW 1.6 MPI/75 kw 1.6 MPI/75 kw Engine

Petrol engines. Technical specifications 1.4 MPI/59kW 1.6 MPI/75 kw 1.6 MPI/75 kw Engine ŠKODA Octavia Tour Petrol engines Technical specifications 1.4 MPI/59kW 1.6 MPI/ kw 1.6 MPI/ kw Engine Engine type petrol engine, in-line, liquid cooling system, DOHC, transverse in front petrol engine,

More information

PPM HYDRAULIC PRESSBRAKES

PPM HYDRAULIC PRESSBRAKES PPM HYDRAULIC PRESSBRAKES PPM Hydraulic pressbrakes Our long experience in producing hydraulic pressbrakes, as well conventional as CNC controlled, enables us to bring to our customers a solid engineered,

More information

Nissan Forklift Europe B.V. http://www.nissan-nfe.com CEN-BX-03.NFE/08-08-5000 Printed in the Netherlands. * Larger battery capacities on request

Nissan Forklift Europe B.V. http://www.nissan-nfe.com CEN-BX-03.NFE/08-08-5000 Printed in the Netherlands. * Larger battery capacities on request MAIN SPECIFICATIONS Model (Pneumatic Tyres) BX-15 BX-18 BX-20 BX-25 Load capacity kg 1500 1500 1750 1750 2000 2000 2500 2500 Load centre mm 500 500 500 500 500 500 500 500 Wheelbase mm 1270 1450 1270 1450

More information

Pallet Handling Conveyors & Conveyor Systems. Including: Standard Range Customised Range

Pallet Handling Conveyors & Conveyor Systems. Including: Standard Range Customised Range iverbank ngineering CONVEYOR COLLECTION TODAY S PRODUCTS, TOMORROW S ENGINEERING Pallet Handling Conveyors & Conveyor Systems Including: Standard Range Customised Range Riverbank Engineering Ltd Unit 38,

More information

ELECTRICAL WIRING (R.H. DRIVE VEHICLES)

ELECTRICAL WIRING (R.H. DRIVE VEHICLES) C-1 ELECTRICAL WIRING (R.H. DRIVE VEHICLES) CONTENTS GENERAL.......................... 3 WIRING HARNESS CONFIGURATION DIAGRAMS......................... 4 ENGINE COMPARTMENT................ 4 DASH PANEL...........................

More information

RX 50 Technical Data.

RX 50 Technical Data. @ RX 50 Technical Data. Electric Forklift Truck RX 50-10 C RX 50-10 RX 50-13 RX 50-15 RX 50-16 2 RX 50 ELECTRIC FORKLIFT TRUCK. In accordance with VDI guidelines 2198, this specification applies to the

More information

UNIT 1 INTRODUCTION TO AUTOMOBILE ENGINEERING

UNIT 1 INTRODUCTION TO AUTOMOBILE ENGINEERING UNIT 1 INTRODUCTION TO AUTOMOBILE ENGINEERING Introduction to Automobile Engineering Structure 1.1 Introduction Objectives 1.2 Definition 1.3 Classification of Vehicles 1.4 Layout of an Automobile Chassis

More information

AUTO SERVICE TECHNICIAN LEVEL 4 CURRICULUM/SYLLABUS

AUTO SERVICE TECHNICIAN LEVEL 4 CURRICULUM/SYLLABUS AUTO SERVICE TECHNICIAN LEVEL 4 CURRICULUM/SYLLABUS This program is aimed at training candidates for the job of a Auto Service Technician Level 4, in the Automobile Sector/Industry and aims at building

More information

IVECO CHASSIS DAILY 70C21D (4x2)

IVECO CHASSIS DAILY 70C21D (4x2) (Similar vehicle) Base on: IVECO CHASSIS DAILY 70C21D (4x2) MAGIRUS FIRE FIGHTING AND RESCUE VEHICLE Page 1 CHASSIS SPECIFICATIONS CHASSIS Manufacturer: Model: IVECO 70C21 D Front axles admissible weight:

More information

Servo/Hydraulic Press Brake. HG Series HG 5020, HG 8025, HG 1303, HG 1703 HG 1704, HG 2203, HG 2204

Servo/Hydraulic Press Brake. HG Series HG 5020, HG 8025, HG 1303, HG 1703 HG 1704, HG 2203, HG 2204 Servo/Hydraulic Press Brake HG Series HG 5020, HG 8025, HG 1303, HG 1703 HG 1704, HG 2203, HG 2204 The HG Series Press Brake An ultra-high precision, high-speed compact bending solution featuring an advanced

More information

CNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining

CNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining CNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining Optional spindle package: 31 kw maximum power 870 Nm max. torque

More information

TANK FABRICATION. Automated Solutions for Your Tank Fabrication Project. Bug-o Systems www.bugo.com

TANK FABRICATION. Automated Solutions for Your Tank Fabrication Project. Bug-o Systems www.bugo.com TANK FABRICATION Automated Solutions for Your Tank Fabrication Project. Bug-o Systems www.bugo.com BUG-O ALL TIME GIRTH WELDER Bug-o Systems offers the Automatic Girth Welder for tank fabrication applications.

More information

MERCEDES-BENZ WORKSHOPS CAMERA WHEEL ALIGNMENT SYSTEM

MERCEDES-BENZ WORKSHOPS CAMERA WHEEL ALIGNMENT SYSTEM MERCEDES-BENZ WORKSHOPS CAMERA WHEEL ALIGNMENT SYSTEM GENERAL INTRODUCTION THE DIGITAL TruckCam Camera Wheel Alignment System is one of the most advanced systems on the world market. With the integrated

More information

Tools & Equipment Robinair

Tools & Equipment Robinair Tools & Accessories 2 Robinair Product overview AC RAnge Robinair is VDA and TüV approved and carries SAE-J approval. Robinair is approved by the following OEM s: 3 Robinair Moving from R134a to R1234yf

More information

Fully automatic air conditioning service! Bosch ACS 600, 601 and 650 for the workshop

Fully automatic air conditioning service! Bosch ACS 600, 601 and 650 for the workshop Fully automatic air conditioning service! Bosch ACS 600, 601 and 650 for the workshop ACS 600, 601, 650: Air conditioning service units from Bosch u ACS 600 even the entry model is fully automatic u ACS

More information

PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842

PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842 l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load

More information

Short Form Catalogue. Alarm Systems. Reliable Supervision and Control

Short Form Catalogue. Alarm Systems. Reliable Supervision and Control Short Form Catalogue Alarm Systems Reliable Supervision and Control Alarm Monitors and Indicators The SELCO product range includes a number of alarm monitors and indicator panels for use in numerous applications.

More information

Material test chamber with mechanical convection

Material test chamber with mechanical convection FP series 400 Material test chambers Material test chamber with mechanical convection A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and

More information

INSTRUCTION MANUAL CIRRO MK 3/TYPE 2 MIST GENERATOR

INSTRUCTION MANUAL CIRRO MK 3/TYPE 2 MIST GENERATOR INSTRUCTION MANUAL CIRRO MK 3/TYPE 2 MIST GENERATOR INTRODUCTION The Cirro MK 3 is a fully professional mist generator for producing sufficient airborne reflection particles to enable effect lighting to

More information

Table of Contents. Introducing AYGO. Accessing your vehicle 2 3. Lights 9. Wipers 10. Electric windows 4. Gear change 11

Table of Contents. Introducing AYGO. Accessing your vehicle 2 3. Lights 9. Wipers 10. Electric windows 4. Gear change 11 AYGO Brief Guide Table of Contents Accessing your vehicle 2 3 Electric windows 4 Steering wheel (Vehicles with an adjustable type) 4 Seat and seat belt adjustment 5 Instrument Panel overview 6 Instrument

More information

MUDDY MOTORSPORTS PARK RULE BOOK. Updated 2015

MUDDY MOTORSPORTS PARK RULE BOOK. Updated 2015 MUDDY MOTORSPORTS PARK RULE BOOK Updated 2015 General Rules 1. All spectators and crew members must be behind the crowd control fence. 2. Only track officials and one crew member will be on the track for

More information

VEHICLE DIAGNOSTICS THE AUTOCOM WAY

VEHICLE DIAGNOSTICS THE AUTOCOM WAY VEHICLE DIAGNOSTICS THE AUTOCOM WAY CARS TRUCKS GENERIC A COMPLETE DIAGNOSTIC SOLUTION CDP+ is a quick and reliable diagnostic tool serving as a link between vehicle and computer. It works on both old

More information

1x90 TONS TENSIONERS TECHNICAL PROPOSAL. 1 X 90 Tons 30 m/min Tensioners TECHNICAL PROPOSAL JOB 08/059. 0 19/02/2008 Basic proposal PP GM SB

1x90 TONS TENSIONERS TECHNICAL PROPOSAL. 1 X 90 Tons 30 m/min Tensioners TECHNICAL PROPOSAL JOB 08/059. 0 19/02/2008 Basic proposal PP GM SB Pagina N.: 1 of 19 1 X 90 Tons 30 m/min Tensioners JOB 08/059 0 19/02/2008 Basic proposal PP GM SB Rev N Date Issue Description Prepared by Checked by Approved by Pagina N.: 2 of 19 TABLE OF CONTENTS:

More information

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining [ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation

More information

Cushion Tyre Forklift Range 1.5 to 7.0 ton

Cushion Tyre Forklift Range 1.5 to 7.0 ton 1.5 to 7.0 ton Availability and specifications are determined regionally and are subject to change without notice. Please consult your authorised Toyota distributor for details. - Dentsu Brussels - 1/720/010/10077

More information

SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1

SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1 CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @

More information

testing equipment for quality management Programme summary. METROLOGY Tensile and Pressure Testing Machines Measuring Devices Display Devices

testing equipment for quality management Programme summary. METROLOGY Tensile and Pressure Testing Machines Measuring Devices Display Devices testing equipment for quality management Programme summary. METROLOGY Sheet metal testing Surface testing Corrosion testing Tensile and Pressure Testing Machines Measuring Devices Display Devices The physical

More information