Syslog Message Reference

Transcription

1 Syslog Message Reference Feature Message Category Description Format AAA LOGIN_FAILED When the aaa module failed to login the user.the reason for failure is "User%s-Client_ip%s-Failure_reason\"%s\"" indicated in the message AAA EXTRACTED_GROUPS INFO After a user logs in the group for the user has been extracted "Extracted_groups\"%s\"" UI CMD_EXECUTED INFO Logs the NSCLI/GUI command "User%s-Remote_ip%s-Command\"%s\"- executed in NetScaler ""Status\"%s\"" "User%s-Client_ip%s-""Nat_ip%s- SSLVPN LOGIN INFO SSLVPN login succeeds Vserver%s:%d-Browser_type\"%s\"- SSLVPN_client_type%s-Group(s)\"%s\"" "User%s-""Client_ip%s-Nat_ip%s- ""Vserver%s:%d-""Start_time\"%s\"- End_time\"%s\"-Duration%s- ""Http_resources_accessed%s- NonHttp_services_accessed%s- ""Total_TCP_connections%d- SSLVPN LOGOUT INFO Total_UDP_flows%d- SSLVPN session logs out.logout ""Total_policies_allowed%dmethod is captured in the message Total_policies_denied%d- ""Total_bytes_send%s-Total_bytes_recv%s- ""Total_compressedbytes_send%s- Total_compressedbytes_recv%s- ""Compression_ratio_send%d.%02u%%- ""Compression_ratio_recv%d.%02u%%- ""LogoutMethod\"%s\"-Group(s)\"%s\"" "Source%s:%d-Destination%s:%d- SSLVPN ICASTART INFO ICA application launch has started ""username:domainname%s- ""applicationname%s-starttime\"%s\"- ""connectionid%x" SSLVPN ICAEND_CONNSTAT INFO ICA application has terminated "Source%s:%d-Destination%s:%d- username:domain_name%s-""start_time\"%s\"- End_time\"%s\"-""Duration%s- Total_bytes_send%d-Total_bytes_recv%d- ""Total_compressedbytes_send%d-

2 SSLVPN TCPCONNSTAT INFO SSLVPN TCPCONN_TIMEDOUT INFO SSLVPN UDPFLOWSTAT INFO SSLVPN HTTPREQUEST INFO SSLVPN SSLVPN NONHTTP_RESOURCE ACCESS_DENIED HTTP_RESOURCEACC ESS_DENIED NOTICE NOTICE Logs the TCP connection related information for a connection belonging to a SSLVPN session An SSLVPN connection timed out.the information about the connection start and end time the amount of data transferred and received are present in the message date When a UDP flow, within a SSLVPN session, terminates A SSLVPN session receives a HTTP request A non-http resource access is denied by policy engine. The denied policy name is captured in the log message. A http resource access is denied by policy engine. The denied policy name is captured in the log message. Total_compressedbytes_recv%d- ""Compression_ratio_send%d.%02u%%- Compression_ratio_recv%d.%02u%%- ""connectionid%x" "User%s-Client_ip%s-Nat_ip%s-Vserver%s:%d- ""Source%s:%d-Destination%s:%d- Start_time\"%s\"-End_time\"%s\"-""Duration%s- Total_bytes_send%d-Total_bytes_recv%d- ""Total_compressedbytes_send%d- Total_compressedbytes_recv%d- ""Compression_ratio_send%d.%02u%%- Compression_ratio_recv%d.%02u%%- Access%s-Group(s)\"%s\"" "User%s-Client_ip%s-""Nat_ip%s- Vserver%s:%d-Last_contact\"%s\"- Group(s)\"%s\"" "User%s-Client_ip%s-""Nat_ip%s- Vserver%s:%d-Source%s:%d- ""Destination%s:%d-Start_time\"%s\"- End_time\"%s\"-""Duration%s- Total_bytes_send%d-""Total_bytes_recv%d- Access%s-Group(s)\"%s\"" "%suser%s:group(s)%s:vserver%s:%d- %s%s%s%s" "User%s-Client_ip%s-Nat_ip%s- ""Vserver%s:%d-Source%s:%d- Destination%s:%d-""Total_bytes_send%d- Total_bytes_recv%d-Denied_by_policy\"%s\"- Group(s)\"%s\"" "User%s-Vserver%s:%d-Total_bytes_send%d- Remote_host%s-""Denied_url%s- Denied_by_policy\"%s\"-Group(s)\"%s\"" SSLVPN LICLMT_REACHED INFO SSLVPN license limit reached "Vserver%s:%d-License_limit%d" Logs with severity ERROR when client SSLVPN CLISEC_CHECK ERROR DEBUG security check for a SSLVPN session "User%s-ClientIP%s-Vserver%s:%dfails, otherwise logs with severity Client_security_expression\"%s\"-" SSLVPN CLISEC_EXP_EVAL ERROR Logs with severity ERROR when client "User%s:-ClientIP%s-Vserver%s:%d-

3 SSLVPN STA_VALIDATE INFO EVENT ALERTSTARTED ALERT EVENT ALERTENDED ALERT security expression evaluates to False, otherwise logs with severity DEBUG After a user logs into SSLVPN and the group for the user has been extracted When SNMP module starts an alarm (usually when the value of a monitored attribute crosses the threshold value When SNMP module stops an alarm (usually when the value of a monitored attribute returns to normal state) EVENT STARTSYS INFO When NetScaler starts "%s" EVENT STARTCPU INFO When a particular CPU starts "%s" EVENT DEVICEDOWN NOTICE Whenever a device is down "%s" EVENT DEVICEOFS NOTICE Whenever a device is out of service "%s" EVENT DEVICEUP NOTICE Whenever a device is up "%s" EVENT NICSTART NOTICE When the network interface is started "%s" EVENT NICSTOP NOTICE When the network interface is stopped "%s" EVENT NICHANG NOTICE When the network interface is in hung state "%s" EVENT NICRESET NOTICE When the network interface is reset "%s" EVENT NICMIGRATE NOTICE When an interface is bound or unbound from a channel "%s" EVENT STOPSYS INFO When the NetScaler system is stopped "%s" EVENT FREEBADMEM EMERGENCY When bad memory is freed (internal error) "%s" EVENT FREEDUPMEM EMERGENCY When duplicate memory free occurs (internal error) "%s" EVENT FREEEXTMEM EMERGENCY When memory is freed from a wrong pool (internal error) "%s" EVENT PROPSUCCESS INFO When HA propagation is successful "%s" EVENT PROPFAIL ALERT When HA propagation fails "%s" EVENT STATECHANGE 0 HA State has changed.the string along with the message gives more information "%s" EVENT CACHESTARTFLUSH INFO When cache flush starts "%s" EVENT CACHESTOPFLUSH INFO When cache flush is complete "%s" EVENT MONITORTH INFO The monitor bound to the service has "%s" ""Clientsecurityexpression%sevaluatedto%s(%d) " "Xdatalen%d-Xdata%s" "%s" "%s"

4 hit threshold limit EVENT MONITORDOWN INFO The monitor bound to the service is down. "%s" EVENT MONITORUP INFO The monitor bound to the service is up. "%s" EVENT ROUTEDOWN INFO When the route is down "%s" EVENT ROUTEUP INFO When the route is up "%s" EVENT VRID6DOWN INFO When the vrid changes state to backup "%s" EVENT VRIDDOWN INFO When the vrid changes state to backup "%s" EVENT VRIDUP INFO When the vrid changes state to master "%s" EVENT VRIDINIT INFO When the vrid changes state to init "%s" EVENT VIPRHIUP INFO When the rhi state of vip changes to up "%s" EVENT VIPRHIDOWN INFO When the rhi state of vip changes to down "%s" EVENT STARTSAVECONFIG INFO When save configuration started "%s" EVENT STOPSAVECONFIG INFO When save configuration has stopped "%s" EVENT CONFIGSTART INFO When NetScaler starts to read the configuration from ns.conf file (during "%s" boot-up) EVENT CONFIGEND INFO When NetScaler has completed reading the configuration from ns.conf "%s" file (during boot-up) EVENT NICLACPSC NOTICE "%s" EVENT NICLOW_THROUGHPU When an interface's throughput is less NOTICE T than the min required "%s" EVENT NICNORMAL_THROUG When an interface's throughput is NOTICE HPUT equal or greater than the min required "%s" EVENT DHCPSVRERR INFO When the DHCP server sends an invalid setting "%s" EVENT UNKNOWN DEBUG "%s" SSLLO G SSLLO G SSL_HANDSHAKE_FAI LURE SSL_HANDSHAKE_SU CCESS DEBUG DEBUG SSL HandShake Failure SSL HandShake Success "SPCBId%d-ClientIP%s-ClientPort%d- "\"VserverServiceIP%s-VserverServicePort%d- "\"ClientVersion%s-CipherSuite\"%s\"" "SPCBId%d-ClientIP%s-ClientPort%d- "\"VserverServiceIP%s-VserverServicePort%d- "\"ClientVersion%s-CipherSuite\"%s\"-

5 "\"Session%s" SSLLO SSL_CERT_EXPIRY_IM NOTICE SSL Certificate Expiry Imminent "CertificateKeyPair%s-DaysToExpire%u" G MINENT SSLLO SSL_HANDSHAKE_ISS DEBUG SSL Client Certificate IssueName "SPCBId%d-IssuerName\"%s\"" G UERNAME SSLLO SSL_HANDSHAKE_SU DEBUG SSL Client Certificate SubjectName "SPCBId%d-SubjectName\"%s\"" G BJECTNAME SSLLO SSL_CRL_UPDATE_SU "crl_name%s-server_ip%s-server_port%d- NOTICE SSL CRL Update Success G CCESS "\"methodldap-ldapscope%s-" SSLLO SSL_CRL_UPDATE_FA "crl_name%s-server_ip%s-server_port%d- NOTICE SSL CRL Update Failure G ILURE "\"methodldap-ldapscope%s-" _STARTURL INFO AppFw StartURL violation PPE%u%s%sDisallowIllegalURL:%s%s" _DENYURL INFO AppFw DenyURL violation PPE%u%s%sDisallowDenyURL:%s%s" _REFERER_HE INFO AppFw Referer header violation "parsingrefererheader'%s'failed" ADER _CSRF_TAG INFO AppFw CSRF tag violation PPE%u%s%s%sCSRFTagvalidationfailed:%s" PPE%u%s%s%sCrosssitescriptcheckfailedfor%s%s=\"%s\"%s" _XSS INFO AppFw XSS violation PPE%u%s%s%sCrosssitescriptcheckfailedfor%s%s=\"%s\"%s" _XML_XSS AppFw XSS violation in XML _SQL INFO AppFw SQL Injection violation PPE%u%s%s%s%sKeywordcheckfailedfor%s% s=\"%s\"%s" _XML_SQL AppFw SQL Injection violation in XML PPE%u%s%s%s%sKeywordcheckfailedfor%s% s=\"%s\"%s" _COOKIE INFO AppFw Cookie Consistency violation PPE%u%s%s%sCookievalidationfailedfor%s%s %s%s%s" _FIELDCONSIS INFO AppFw Field Consistency violation PPE%u%s%s%sFieldconsistencycheckfailedforf TENCY ield%s=\"%s\"%s" _BUFFEROVER FLOW_URL _BUFFEROVER FLOW_COOKIE INFO INFO AppFw Buffer Overflow violation in URL AppFw Buffer Overflow violation in Cookie PPE%u%s%sURLlength(%d)isgreaterthanmaxi mumallowed(%d):%s%s" PPE%u%s%sCookieheaderlength(%d)isgreatert hanmaximumallowed(%d):%s%s"

6 _BUFFEROVER FLOW_HDR _FIELDFORMA T _SAFECOMME RCE _SAFECOMME RCE_XFORM INFO INFO INFO INFO AppFw Buffer Overflow violation in HTTP Headers AppFw Field Format violation AppFw Safe Commerce violation AppFw Safe Commerce violation detected and transformed _SAFEOBJECT INFO AppFw Safe Object violation _POLICY_HIT INFO AppFw profile invoked _POLICY_HIT_ BUILTIN _MAX_UPLOAD S _SIGNATURE_ MATCH INFO INFO INFO AppFw built-in profile invoked File uploads exceed the allowed number AppFw signature violation AF_BIND_TO_PROFILE INFO AppFw rule bound to HTML profile "Profile:%s AF_BIND_XML_TO_PR OFILE INFO AppFw rule bound to XML profile "Profile:%s AF_ADD_FIELDTYPE INFO Add an AppFw Field Type "FieldType:%s AF_ADD_PROFILE INFO Add an AppFw profile "Profile:%s\n" AF_RM_FIELDTYPE INFO Remove an Appfw Field Type "FieldType:%s AF_RM_PROFILE INFO Remove an AppFw profile "Profile:%s\n" AF_ADD_CFFIELD INFO Add a confidential field "FieldName:%s AF_RM_CFFIELD INFO Remove a confidential field "FieldName:%s AF_400 INFO AF_MEMORY_ERR AppFw Request error. Generated 400 Response Memory allocation request for %lu bytes failed PPE%u%s%sHeader(%s)length(%d)isgreaterth anmaximumallowed(%d):%s%s" PPE%u%s%s%sFieldformatcheckfailedforfield% s=\"%s\"%s" PPE%u%s%s%sCreditCardinternalerror(%d)whil ematching...takingprecautionaryaction%s" PPE%u%s%s%sTransformed(xout)potentialcred itcardnumbersseeninserverresponse" PPE%u%s%s%sSafeObjectinternalerror(%d)whi lematching...takingprecautionaryaction:%s%s" PPE%u%s%s%sApplicationFirewallprofileinvoke d" PPE%u- %s%sapplicationfirewallprofileinvoked%s" PPE%u%s%s%sNumberoffileuploadsisoverthe maximumallowedlimitof%d%s" PPE%u%s%s%sSignatureviolationruleID%u:%s %s" PPE%u-%sUnabletoparseheaders" "Contentlengthistoolarge(%ldBytes).MemoryAllo cationfailed."

7 AF_UTHREAD_STACK _ERR _XML_ATTACH MENT_FOUND _XML_ATTACH MENT_ERR_CALLBAC K_NULL _XML_ATTACH MENT_ERR_INVALIDH EADER _XML_ATTACH MENT_ERR_INVALID_ HEADER _XML_ATTACH MENT_ERR_BOUNDAR Y_MISMATCH _XML_ERR_NO _ATTACHMENT_BOUN DARY _XML_ATTACH MENT_ERR_MAX_SIZE _XML_ATTACH MENT_ERR_CONTENT _TYPE _XML_DDOS_E RR_MSG_SEND_FAIL _XML_DOS_ER R_CHAR_DATA_LENG TH _XML_DOS_ER R_DTD _XML_DOS_ER R_EXT_ENTITY _XML_DOS_ER R_MAX _XML_DOS_ER R_MAX_ATTRIBUTES ERROR Appsecure uthread at 0x%x had a stack error Attachment Found in the XML Message. XML Attachment CallBack is NULL but HTTP message is MIME Attachment message. String %s is supposed to be MIME Header. But it is not according to the format of Mime Header HeaderName:HeaderValue HTTP Content type should be 'application/xop+xml' or '^(text application)/([a-za- Z]*\+xml xml)' but we got %s. Boundary mismatch in mime message. The message having content-type as 'Multipart/Related' and not having a boundary is invalid. XML Message has an Attachment with size greater than the Configured Max Attachment Size. XML Message has an Attachment with Illegal Content-Type "Uthreadstackpointeroverflowed:"); XML_ATTACHMENT_MSG_INVALIDHEADER XML_ATTACHMENT_MSG_INVALIDHEADER XML_ATTACHMENT_MSG_INVALIDHEADER XML_ATTACHMENT_MSG_INVALIDHEADER XML_ATTACHMENT_MSG_INVALIDHEADER XML_ATTACHMENT_MSG_INVALIDHEADER XML_ATTACHMENT_MSG_INVALIDHEADER XML_ATTACHMENT_MSG_INVALIDHEADER AppFw XML DDoS Send Fail Error. Exceeds max character data length. DTD present in the XML message. External entities present in the XML message. AppFw XML DoS Maximum Error Element '%s' exceeds maximum attributes per element.

8 _XML_DOS_ER R_MAX_ATTRIBUTE_N AME_LENGTH _XML_DOS_ER R_MAX_ATTRIBUTE_V ALUE_LENGTH _XML_DOS_ER R_MAX_ELEMENTS _XML_DOS_ER R_MAX_ELEMENT_CHI LDREN _XML_DOS_ER R_MAX_ELEMENT_DE PTH _XML_DOS_ER R_MAX_ELEMENT_NA ME_LENGTH _XML_DOS_ER R_MAX_FILE_SIZE _XML_DOS_ER R_MAX_NODES _XML_DOS_ER R_MIN_FILE_SIZE _XML_ERR_NO T_WELLFORMED _XML_DOS_ER R_PI _XML_DOS_ER R_MAX_NAMESPACES _XML_DOS_ER R_MAX_NAMESPACEU RI_LENGTH _XML_DOS_ER R_MAX_ENTITY_EXPA NSION_DEPTH _XML_DOS_ER R_MAX_ENTITY_EXPA NSIONS In element '%s' an attribute exceeds maximum name length. In element '%s' attribute '%s' exceeds maximum attribute value length. Element '%s' exceeds maximum elements per message. Parent of element '%s' exceeds maximum children at element '%s'. Element '%s' exceeds maximum element depth. Element '%s' exceeds maximum element name length. Message size exceeds max size. Node '%s' exceeds maximum nodes per message. Message size less than min size. Message is not a well-formed XML. XML_MSG_NOT_WELLFORMED Processing instructions present in the XML message. Element '%s' exceeds maximum active namespaces. In element '%s' a namespace exceeds maximum uri length. Exceeds max entity expansion depth Exceeds max number of entity expansions _XML_DOS_ER Exceeds max total SOAP array size

9 R_MAX_SOAPARRAY_ SIZE _XML_DOS_ER R_MAX_SOAPARRAY_ Exceeds max SOAP array rank RANK _XML_ERR_CU AppFw XML internal error STOM _XML_ERR_DD AppFw XML DDoS Connect to Server OS_CONNECT_TO_SE Failed. RVER_FAILED _XML_ERR_DD AppFw XML DDoS Interaction socket OS_INTERATION_SOC open Failed. KET_OPEN_FAIL _XML_ERR_DD OS_INVALID_CONFIG_ AppFw XML DDoS Invalid Config File. FILE _XML_ERR_DD AppFw XML DDoS No Folder OS_NO_FOLDER_INST Installation Path. ALLATION_PATH _XML_ERR_DD AppFw XML DDoS Failure to Open OS_OPEN_CONFIG_FI Config File. LE_FAIL _XML_ERR_DO S_TRIGGERED Denial of Service Error. _XML_ERR_EN Environment variable QTHOME not V_NOT_SET set. _XML_ERR_HA Problems inserting a namespace into SH_INSERT the hash table. _XML_ERR_HA Problems getting the key of a SH_LOOKUP namespace from the hash table. _XML_ERR_INI Unable to initialize XML tokenizer. TIALIZING_TOKENIZER _XML_ERR_INV Unable to open the file. ALID_FILE _XML_ERR_INV AppFw XML Internal State Invalid. ALID_STATE _XML_ERR_INV Invalid XPath. ALID_XPATH _XML_ERR_LO AppFw XML Low memory.

10 W_MEMORY _XML_ERR_MA LFORMED_ADDRESS _XML_ERR_NO _DIME _XML_ERR_OP ERATION_CALLBACK _XML_ERR_PR EFIX_LENGTH_EXCEE DED _XML_ERR_RE AD_FAILED _XML_ERR_ST REAM_POP _XML_ERR_ST REAM_PUSH _XML_ERR_UN SUPPORTED_PORT _XML_ERR_UN SUPPORTED_PROTOC OL _XML_ERR_VA LIDATION_FAILED _XML_PACKET _PROCESSING_ERR_ CONTEXT_NULL _XML_PACKET _PROCESSING_ERR_ CONTEXT_STATE_NU LL _XML_PACKET _PROCESSING_ERR_ MESSAGE_CONFIG_N ULL _XML_VALIDAT ION_ERR_ABSTRACT_ ELEMENT Malformed address NS-XML supports SwA and MTOM SOAP attachments, but attachment with this message is DIME. Problems registering callbacks for operations. Prefix length %d exceeded, encountered length is %d. AppFw XML Read Failure Problems during pop of the node out of the XML stream. Problems during push of the node into the XML stream. Port in address %s is greater than Unsupported protocol AppFw XML Validation Failed XML_VALIDATOR_MSG_LOAD_FAILED AppFw XML Context is NULL. Context user state is NULL; internal error. Message config struct is NULL. Cannot instantiate abstract element XML_VALIDATOR_MSG_LOAD_FAILED

11 _XML_VALIDAT ION_ERR_ABSTRACT_ TYPE _XML_VALIDAT ION_ERR_ADDHEADE RS _XML_VALIDAT ION_ERR_ATTRIBUTE _MAX_OCCURS _XML_VALIDAT ION_ERR_ATTRIBUTE _MIN_OCCURS _XML_VALIDAT ION_ERR_COMPILED_ WSDL _XML_VALIDAT ION_ERR_CONTENT_ MODEL_VIOLATED _XML_VALIDAT ION_ERR_CORRUPT_ COMPILED_WSDL _XML_VALIDAT ION_ERR_CORRUPT_ SCHEMA _XML_VALIDAT ION_ERR_DATATYPE_ ENGINE_INIT _XML_VALIDAT ION_ERR_INTERNAL _XML_VALIDAT ION_ERR_INVALID_AT TRIBUTE _XML_VALIDAT ION_ERR_INVALID_CO MBINATION _XML_VALIDAT ION_ERR_INVALID_CO MPILED_WSDL Cannot instantiate abstract type '%s', for element '%s'. Additional soap header %s present in soap message. Attribute '%s' appears more than once in element '%s'. XML_VALIDATOR_MSG_LOAD_FAILED XML_VALIDATOR_MSG_LOAD_FAILED XML_VALIDATOR_MSG_LOAD_FAILED Required attribute missing in element XML_VALIDATOR_MSG_LOAD_FAILED Compiled WSDL file is corrupt. XML_VALIDATOR_MSG_LOAD_FAILED Content model of element '%s' not satisfied. Compiled WSDL file is corrupt. Error compiling the schema Initialization of the datatype engine failed. Internal corruption of WSDL inmemory structure. XML_VALIDATOR_MSG_LOAD_FAILED Attribute '%s' is invalid. XML_VALIDATOR_MSG_LOAD_FAILED Invalid configuration for soap validation. Not able to open compiled WSDL. _XML_VALIDAT ION_ERR_INVALID_CO Element '%s' has invalid content model. XML_VALIDATOR_MSG_LOAD_FAILED

12 NTENT_MODEL _XML_VALIDAT ION_ERR_INVALID_DA Data type is invalid. XML_VALIDATOR_MSG_LOAD_FAILED TATYPE _XML_VALIDAT ION_ERR_INVALID_EL Invalid element. XML_VALIDATOR_MSG_LOAD_FAILED EMENT _XML_VALIDAT ION_ERR_INVALID_FIL Not able to open the file. E _XML_VALIDAT Did not get expected type for element ION_ERR_INVALID_TY '%s', got '%s'. PE_SUBSTITUTION XML_VALIDATOR_MSG_LOAD_FAILED _XML_VALIDAT Unable to load validation engine. ION_ERR_LOADING _XML_VALIDAT AppFw XML Validation Max Error. ION_ERR_MAX _XML_VALIDAT ION_ERR_NOSERVICE Service Url is not present or NULL. XML_VALIDATOR_MSG_LOAD_FAILED URL _XML_VALIDAT ION_ERR_NOT_SUPP Feature not supported. XML_VALIDATOR_MSG_LOAD_FAILED ORTED _XML_VALIDAT ION_ERR_SOAP_BOD Soap Body structure check failed. Y _XML_VALIDAT ION_ERR_SOAP_ENVE Soap Envelope structure check failed. LOPE _XML_VALIDAT ION_ERR_SOAP_HEA Soap Header structure check failed. DER _XML_VALIDAT ION_ERR_UNBOUNDE Prefix '%s' is unbounded. XML_VALIDATOR_MSG_LOAD_FAILED D_PREFIX _XML_VALIDAT ION_LOAD_ERR_CON TENTS_CANNOT_BE_ Element '%s' cannot be nil. XML_VALIDATOR_MSG_LOAD_FAILED NIL _XML_VALIDAT Element '%s' is nil, cannot have XML_VALIDATOR_MSG_LOAD_FAILED

13 ION_LOAD_ERR_NIL_ WITH_CONTENTS _XML_VALIDAT ION_ERR_REX_STACK _OVERFLOW _XML_VALIDAT ION_ERR_REX_STACK _EMPTY _XML_VALIDAT ION_ERR_SOAPBODY _EMPTY _XML_GENERI C_ERR_EMPTYBODY_ REQ _XML_VALIDAT OR_LOAD_ERR_ELEM ENT_INVALID_DATATY PE_VALUE _XML_VALIDAT OR_LOAD_ERR_ELEM ENT_INVALID_LOCATI ON _XML_VALIDAT OR_LOAD_ERR_FACE T_MISMATCH _XML_VALIDAT OR_LOAD_ERR_FAILE D _XML_VALIDAT OR_LOAD_ERR_INVAL ID_ATTRIBUTE_VALUE _XML_VALIDAT OR_LOAD_ERR_INVAL ID_DATATYPE _XML_VALIDAT OR_LOAD_ERR_INVAL ID_SCHEMA_NODE_T YPE _XML_VALIDAT OR_LOAD_ERR_INVAL contents. Level of recursion more than maximum allowed depth. Trying to pop from an empty stack. Both SOAP Body and SOAP Header are empty in the SOAP request. Request body is empty in the XML request. XML_VALIDATOR_MSG_LOAD_FAILED XML_VALIDATOR_MSG_LOAD_FAILED XML_GENERIC_ERR_MSG_EMPTYBODY_RE Q_CODE);total=snprintf(buf Value should be of type '%s'. XML_VALIDATOR_MSG_LOAD_FAILED Element '%s' cannot appears at this location. Facet mismatch. XML_VALIDATOR_MSG_LOAD_FAILED AppFw XML Validator Load Failed. Attribute '%s' has invalid value '%s'. Invalid schema datatype. Invalid schema node type. Value '%s' does not match FIXED constraint '%s'.

14 ID_VALUE_FOR_FIXED _XML_VALIDAT OR_LOAD_ERR_LIST_ LENGTH_GT_MAX _XML_VALIDAT OR_LOAD_ERR_LIST_ LENGTH_INVALID _XML_VALIDAT OR_LOAD_ERR_LIST_ LENGTH_LT_MIN _XML_VALIDAT OR_LOAD_ERR_MAX _XML_VALIDAT OR_LOAD_ERR_REQU IRED_ATTRIBUTE _XML_VALIDAT OR_LOAD_ERR_SCHE MA_COMPILATION _XML_VALIDAT OR_LOAD_ERR_WSDL _COMPILATION _XML_WSI_ER R_ACCELEMENTNAME SPACED _XML_WSI_ER R_ARRAYTYPE _XML_WSI_ER R_BAD_ENV_NAMESP ACE List length is greater than max allowed. XML_VALIDATOR_MSG_LOAD_FAILED List length is invalid. XML_VALIDATOR_MSG_LOAD_FAILED List length is lesser than min allowed. XML_VALIDATOR_MSG_LOAD_FAILED AppFw XML Validation Maximum Load Error. Missing require attribute '%s' in element '%s'. Error code in the compiled Schema is being ignored. Error code in the compiled WSDL is being ignored. R2735: A MESSAGE described with an rpc-literal binding MUST place the part accessor elements for parameters and return value in no namespace. Element '%s' must be unqualified. R2113: A MESSAGE containing serialized arrays MUST NOT include the soapenc:arraytype attribute. Element '%s' must not include the soapenc:arraytype attribute. R1015: A RECEIVER MUST generate a fault if they encounter a message whose document element has a local name of "Envelope" but a namespace name that is not " elope/" or " We got namespace '%s' in

15 _XML_WSI_ER R_BINDINGFAULTRES P _XML_WSI_ER R_BODY_CHILD_NAM ESPACE _XML_WSI_ER R_BODY_ENV_NAMES PACE _XML_WSI_ER R_CHILDAFTERBODY _XML_WSI_ER R_CLAIM_MUSTUNDE RSTAND _XML_WSI_ER R_CTXT_NULL _XML_WSI_ER R_DOCTYPEALLOWED _XML_WSI_ER R_DOT_NOTATION SOAP Request. R2740: The response envelope contained soap:fault element(s), but they were not defined in the WSDL description. Element '%s' should be defined as soap:fault in WSDL description. R1014: The children of the soap:body element in a MESSAGE MUST be namespace qualified. Unqualified children of soap:body is '%s'. BP1201: The envelope does not use SOAP 1.1 or SOAP 1.2, i.e. does not have a document element named "Envelope" or a namespace value of lope/ or We got namespace '%s'. R1011: A MESSAGE MUST NOT have any element children of soap:envelope following the soap:body element. Element '%s' should not appear after 'soap:body' element. R0007: A SENDER MUST NOT use the soap:mustunderstand attribute when sending a SOAP header block containing a conformance claim. soap:mustunderstand attribute is present on element '%s'. AppFw XML WSI Internal Context NULL R1008: A MESSAGE MUST NOT contain a Document Type Declaration. DOCTYPE name is '%s'. R1031: When a MESSAGE contains a faultcode element the content of that element SHOULD NOT use of the SOAP 1.1 "dot" notation to refine the

16 _XML_WSI_ER R_ENCODINGSTYLE _XML_WSI_ER R_ENCODINGSTYLEC HILD _XML_WSI_ER R_ENCODINGSTYLEG RANDCHILD _XML_WSI_ER R_ENVELEMENTSNOA TTRIBUTES _XML_WSI_ER R_ENVNONAMESPAC E _XML_WSI_ER R_GOODRESPONSE20 meaning of the Fault. Data '%s' should not contain 'DOT'(.) in it. R1005: A MESSAGE MUST NOT contain soap:encodingstyle attribute on any of the elements whose namespace is the same as the namespace of the qualified document element 'Envelope'. 'soap:encodingstyle' attribute should not be present on element '%s'. R1006: A MESSAGE MUST NOT contain soap:encodingstyle attributes on any element that is a child of soap:body. 'soap:encodingstyle' attribute should not be present on immidiate child '%s' of soap:body. R1007: A MESSAGE described in an rpc-literal binding MUST NOT contain soap:encodingstyle attribute on any elements are grandchildren of soap:body. 'soap:encodingstyle' attribute should not be present on grandchild '%s' of soap:body. R1032: The soap:envelope, soap:header, and soap:body elements in an ENVELOPE MUST NOT have attributes in the same namespace as that of the qualified document element 'Envelope'. Attribute '%s' should not be in the same namespace as that of the qualified document element 'Envelope'. R1033: An ENVELOPE SHOULD NOT contain the namespace declaration xmlns:xml=" 98/namespace". R1111: An INSTANCE SHOULD use a "200 OK" HTTP status code for

17 0 responses that contain a SOAP message that is not a SOAP fault. We should not get 'soap:fault' element when HTTP response code is '200 OK'. _XML_WSI_ER R_HEADER_HAS_WSI CLAIM _XML_WSI_ER R_HTTP _XML_WSI_ER R_ISHTTPPOST _XML_WSI_ER R_ISUTF8OR16 _XML_WSI_ER R_MSGHASALLHEADE RS _XML_WSI_ER R_MUSTUNDERSTAND _XML_WSI_ER R_NODEPLOYED _XML_WSI_ER R_NOENVELOPEWSDL MATCH _XML_WSI_ER R_NONPOSTREQUEST R0005: A MESSAGE's conformance claims MUST be carried as SOAP header blocks. Element '%s' should be immidiate children of soap:header. AppFw XML WSI HTTP Error R1132: A HTTP request MESSAGE MUST use the HTTP POST method. We got '%s' HTTP method. R1012: A MESSAGE MUST be serialized as either UTF-8 or UTF-16. We got encoding '%s'. R2738: A MESSAGE MUST include all soapbind:headers specified on a wsdl:input or wsdl:output of a wsdl:operation of a wsdl:binding that describes it.wsdl header %s is not present in soap message. R1013: A MESSAGE containing a soap:mustunderstand attribute MUST only use the lexical forms "0" and "1". Value of 'soap:mustunderstand' attribute is '%s'. Resource id of deployment is NULL. BP1701: The envelope does not conform to the SOAP schema located at ' elope/' or ' R1114: An INSTANCE SHOULD use a "405 Method not Allowed" HTTP status code if the request method was

18 _XML_WSI_ER R_NONXMLREQUEST _XML_WSI_ER R_NOPORTURL _XML_WSI_ER R_NOREQWSDLMATC H _XML_WSI_ER R_NORESPWSDLMAT CH _XML_WSI_ER R_NOWSDLDEPLOYE D _XML_WSI_ER R_ONEWAYRESPONS E _XML_WSI_ER RONSESTATUS 200OR202 _XML_WSI_ER RONSEWRAPP ED not "POST". We got '%d' HTTP status code. R1115: An INSTANCE SHOULD use a "415 Unsupported Media Type" HTTP status code if a HTTP request message's Content-Type header fieldvalue is not permitted by its WSDL description. we got '%d' HTTP status code. Port URL is NULL. BP1011: The content of the request envelope does not match the wsdl:message definition. BP1013 The content of the response envelope does not match the wsdl:message definition. Deployed resource is not WSDL. R2714: For one-way operations, an INSTANCE MUST NOT return a HTTP response that contains a SOAP envelope. Specifically, the HTTP response entity-body must be empty. we got the element soap:envelope. R1112: An INSTANCE SHOULD use either a "200 OK" or "202 Accepted" HTTP status code for a response that does do not contain a SOAP message but indicates successful HTTP outcome of a request. We got '%d' HTTP response code. R2729: A MESSAGE described with an rpc-literal binding that is a response message MUST have a wrapper element whose name is the corresponding wsdl:operation name suffixed with the string "Response". Element name should be

19 _XML_WSI_ER R_SOAPACTIONHEAD ERMATCH _XML_WSI_ER R_SOAPACTIONQUOT ED _XML_WSI_ER R_SOAPFAULTALLOW EDCHILD _XML_WSI_ER R_SOAPFAULTCHILDQ _XML_WSI_ER R_SOAPFAULTINHTTP _XML_WSI_ER R_SOAPFAULTNONEN V '%sresponse' but got '%s'. R2744: A HTTP request MESSAGE MUST contain a SOAPAction HTTP header field with a quoted value equal to the value of the soapaction attribute of soapbind:operation, if present in the corresponding WSDL description. Expected '%s' soapaction but got '%s' soapaction in HTTP header. R1109: The value of the SOAPAction HTTP header field in a HTTP request MESSAGE MUST be a quoted string. We got '%s' SOAPAction HTTP header. R1000: When a MESSAGE contains a soap:fault element, that element MUST NOT have element children other than faultcode, faultstring, faultactor and detail. Element '%s' is not a allowed child of 'soap:fault'. R1001: When a MESSAGE contains a soap:fault element its element children MUST be unqualified. 'soap:fault' child '%s' should be unqualified. R1126: An INSTANCE MUST use a "500 Internal Server Error" HTTP status code if the response message is a SOAP Fault. We got '%s' HTTP response code. R1003: A RECEIVER MUST accept fault messages that have any number of qualified or unqualified attributes, including zero, appearing on the detail element. The namespace of qualified attributes can be anything other than the namespace of the qualified document element 'Envelope'. Namespace of attribute '%s' should not be the same as that of the

20 _XML_WSI_ER R_SOAPGOODXML10 _XML_WSI_ER R_STDFAULTCODE _XML_WSI_ER R_USEHTTP10OR11 _XML_WSI_ER R_USEHTTP11 _XML_WSI_ER R_WSICLAIMSWELLFO RMED _XML_WSI_ER R_WSI_LIST_NULL _XML_WSI_ER R_XMLPI _XML_WSI_ER R_XSINIL qualified document element 'Envelope'. BP1601: The soap:envelope or soap:body does not conform to XML 1.0. Error is '%s'. R1004: When a MESSAGE contains a faultcode element the content of that element SHOULD be one of the fault codes defined in SOAP 1.1 or a namespace qualified fault code. 'faultcode' '%s' is not defined in SOAP 1.1 or it is not namespace qualified. R1141: A MESSAGE MUST be sent using either HTTP/1.1 or HTTP/1.0. We got HTTP version '%s'. R1140: A MESSAGE SHOULD be sent using HTTP/1.1. We got HTTP version '%s'. R0004: A MESSAGE MAY contain conformance claims, as specified in the conformance claim schema. Either 'conformsto' attribute is absent or 'soap:mustunderstand' attribute is present on element '%s'. AppFw XML WSI List Null. R1009: A MESSAGE MUST NOT contain Processing Instructions. Name of Processing Instruction is '%s'. R2211: A MESSAGE described with an rpc-literal binding MUST NOT have the xsi:nil attribute with a value of "1" or "true" on the part accessors. Element '%s' must not have the xsi:nil attribute. _XML_XSD_CO Error during initialization MPILE_INIT_ERR _XML_XSD_CO AppFw XML XSDLOAD Failed during MPILE_LOADXSD_ERR Compile _XML_XSD_CO No XSModel to print

21 MPILE_NOMODEL_ER R _XML_XSD_CO INFO Error during parsing MPILE_PARSE_ERR _XML_XSD_CO MPILE_UNEXPECTED_ Unexpected exception during parsing ERR _XML_ERR_SO Message contains SOAP Fault. XML_MSG_SOAP_FAULT);total=snprintf(buf AP_FAULT _XML_SOAP_F Dumps the SOAP Fault contents to XML_MSG_SOAP_FAULT);total=snprintf(buf AULT_CONTENTS Audit log. When a server side and a client side "Source%s:%d-Vserver%s:%d-NatIP%s:%d- TCP connection is delinked.these are TCP CONN_DELINK INFO ""Destination%s:%d-DelinkTime%sthe connections which are being Total_bytes_send%llu-""Total_bytes_recv%llu" tracked by netscaler like HTTP When a TCP connection terminates.the logged data indicates "Source%s:%d-Destination%s:%d- TCP CONN_TERMINATE INFO the number of bytes transmitted and ""StartTime%s-EndTime%sreceived over the connection and lso Total_bytes_send%llu-""Total_bytes_recv%llu" the connection start and end time When a server side and a client side "Source%s:%d-Vserver%s:%d-NatIP%s:%d- TCP connection is delinked.these are ""Destination%s:%d- TCP OTHERCONN_DELINK INFO the connections which are not being DelinkTime%s""Total_bytes_send%utracked by netscaler like FTP,telnet Total_bytes_recv%u" etc ROUTIN ZEBOS_CMD_EXECUT INFO The ZebOS command executed. "%s" G ED SNMP TRAP_SENT INFO Trap Sent Information "%s" Trap Dropped information. Traps are SNMP TRAP_DROPPED INFO "%s" dropped due to rate-limiting ACL ACL_PKT_LOG INFO ACL Packet Log TRANS FORM TRANS FORM TRANS FORM "Source%s-->Destination%s-""ProtocolICMP- ""Type%d-Code%d-""TimeStamp%d(ms)- Hitcount%d-HitRule%s-Data" FILE_REQUEST DEBUG URL Transformation profile invoked "Client%s-Profile%s-%sinto%s" REQ_PARSE_ERROR URL Transformation parsing error REQ_HEADER DEBUG URL Transformation in a request header "Client%s-Profile%s- FailedtoparserequestURL%stransformation- URL%s" "Client%s-Profile%s-Header%s-%sinto%s"