Utility Cabinets. Mesh Cabinet.

Transcription

1 = NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Utility Cabinets 5660LH Recessed and concealed lock protectors for maximum security against drilling and cutting lock Flush-mounted doors Finger-groove door handles Front-door storage Large, lower storage areas for bigger items Angled 3-1/2" high support skids feature threaded holes for easy caster installation Three 3-1/2" high support skids Weather-resistant design Open storage for shovels, picks, brooms and other long-handled tools (Model 5660LH only) Patented, ergonomically designed fold-down recessed handles 5660L 5660LH 5760TD Capacity FT Weight 389 lbs. (176 kg) 375 lbs. (170 kg) 441 lbs. (200 kg) 5660L Utility cabinet 5660LH Utility cabinet 5760TD Utility cabinet 5660L 5660LH 5760TD Mesh Cabinet A B C D E F G H I J K L M N O Optional casters available for increased mobility. See page 433 for options High-visibility mesh screen on three (3) sides Forty-eight (48) smaller, individual compartments, enabling storage of smaller tools and accessories Platform for long-handle tools Sturdy handle for mobility Supplied with two (2) swivel casters and two (2) rigid 4" (102 mm) casters for easy mobility (Model 696) 5060MESH Capacity FT Weight 401 lbs. (182 kg) 5060MESH Mesh cabinet A B C D E F G H I J K L

2 STORAGE & MATERIAL HANDLING Bi-Fold Cabinet 5860 Maximum storage capacity with minimum floor space requirements Four (4) individual 15" D x 14-1/2" H x 59" W (381 x 368 x 1524 mm) storage compartments on each side Reinforced steel shelves welded in place for added strength and durability All shelves feature large front lip to keep small items from rolling off Each bi-fold section is mounted on four casters for easy opening and closing Six (6) swivel and two (2) rigid 6" (152 mm) casters included for easy mobility (Models 503 and 603) Capacity FT Weight 549 lbs. (249 kg) A B C D E F G H I Bi-Fold cabinet Latch Repair Kit (5860) Latch (5860) Strike (5860) Mobile Workbench 3548 Tough composition board work surface on top with built-in chain vise and telescoping wrench stop Removable self-stored shelf enables storage of larger items Supplied with two (2) locking swivel casters and two (2) rigid 6" (152 mm) casters for easy mobility (Model 703) Recessed and concealed lock protectors for maximum security against drilling and cutting lock Finger-groove door handles Large lower storage areas for bigger items Continuous, non-removable hinge pins to prevent theft Patented, ergonomically designed fold-down recessed handles Includes heavy-duty chain vise (3548 only) Capacity FT 3 20 Weight 293 lbs. (133 kg) A B C D E F G H I J K L M Mobile workbench with chain vise 3548X Mobile workbench without chain vise 432 TRUSTED SINCE 1862

3 = NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Welder s Boxes Protects small tools and supplies and comes with a single lock hasp for use with padlock Compact side handles for easy portability Heavy-duty hinges, plus chain connector to hold lid in open position Capacity FT Height Width Depth Weight 42 lbs. (19 kg) 52 lbs. (24 kg) 503/ Replacement Parts Welder s box Welder s box Caster bolt pattern 2-7/8" x 3-1/4" Polyolefin-injected molded hard casters: stain-resistant, chemical-resistant and non-marking 7-1/2" 5-5/8" 696/697 CASTER SELECTION CHART STORAGE BOX CASTER CAT NO. CAT. NO MESH Included L 5660LH 5760TD 5860 Included Included 3548 Included 8060DLX Diameter Tread Capacity Ship Weight 6 in. (152 mm) 2000 lbs. (907 kg) 22 lbs. (10 kg) 6 in. (152 mm) 2000 lbs. (907 kg) 20 lbs. (9 kg) 6 in. (152 mm) 2000 lbs. (907 kg) 20 lbs. (9 kg) 4 in. (102 mm) 1600 lbs. (726 kg) 13 lbs. (6 kg) 4 in. (102 mm) 1600 lbs. (726 kg) 15 lbs. (7 kg) 503* Swivel 603* Rigid, 2 Swivel Rigid, 2 Locking Swivel 696* Rigid, 2 Swivel 697* Swivel Lid Support (L) Side Lid Support (R) Side mm Gas Spring Ball Stud Replacement Kit (all Slant/Flat-Tops) Gas Springs for 2260 only Gas Springs for 3360 only mm Gas Spring Ball Stud Replacement Kit (8060 DLX) Replacement Gas Spring Kit Shock and (2) Clips (8060 DLX) Replacement Gas Spring Kit for 4872, 4848,4860, 3648 & 3660 * Each caster set includes (16) 3/8-16 x 1 self-threading mounting screws. Each caster set includes (16) 3/8-16 x 1 carriage bolts; (16) 3/8-16 hex nuts; (16) 3/8 lockwashers. Note: Screw/washer kit p/n is necessary for mounting 703 casters on boxes other than

4 STORAGE & MATERIAL HANDLING Field Office Slanted work surface with lockable, concealed storage area Concealed lock protectors protect locks from drilling and cutting Weather stripping on doors to help protect documents and tools from the elements Lid with heavy-duty gas spring and a locking arm for ease of opening and safety Shelving throughout, for organizing and storing jobsite tools and supplies Grooved front doors for ease of opening and storage compartment access Patented, ergonomically designed fold-down recessed handles Continuous, non-removable pin hinges Overlapping corners, rolled edges, and strategically placed reinforcements for added strength Recommend #1 and #5 Master Lock padlocks or equivalent Welded 16-gauge steel construction for durability Transportable with forklift Optional casters available for increased mobility Capacity FT Weight 549 lbs. (249 kg) 8060-DLX 8060-DLX Field Office Tamper-proof lock protectors (for upper and lower doors). Slanted work surface with lockable, concealed storage area. Door grooves provide a gripping surface for convenient opening. (Tools sold separately) Top door opens with a gas spring and is supported by a locking arm. Optional casters available for increased mobility. See page 433 for options A B C D E F G H I J K TRUSTED SINCE 1862

5 = NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Compact Field Office Narrow design fits through 36" doorways Automatic locking gas spring secures door in upright position Weather resistant stripping helps to protect against moisture getting inside the box Accommodates up to 55" monitors (50" x 30") Two-level 45 1/2" x 26 1/2" desk allows recessed use of cable and electronics or storage Shrouded padlock guard to improve security Cable pass-through holes Non-marking 6" casters Height with casters Height without casters Weight with casters Weight without casters 78" (1981 mm) 70.5" (1791 mm) 470 lbs (213 kg) 450 lbs (204 kg) 7060-CFO Compact Field Office 7060-CFO * Items in box are not included. Shrouded padlock guard to improve security Automatic locking gas spring secures door in upright position Sized to fit through standard 36 doorways A B C D E F G H I J K

6 STORAGE & MATERIAL HANDLING WIRE AND CABLE HANDLING Data Cable Caddy Width is ideal for large diameter spools of coax, data and communications cable Especially handy for 6" (152 mm) wide and up to 19" (483 mm) diameter spools Folds down for easy storage Pinless design eliminates loose parts Size Capacity Weight 21" (533 mm) L x 28-1/2" (724 mm) W x 11-1/2" (292 mm) H Maximum Total Spool Weight: 100 lbs. (45 kg) Maximum Spool Diameter: 19" (483 mm) Maximum Spool Width: 24.50" (622 mm) 11 lbs. (5 kg) 9520 BX-Armored Coiled Cable Dispenser Data Cable Caddy Dispense armored cable, flexible conduit, Greenfield or NM-B cable fast and easy without twists or tangles Base rotates to dispense the cable without over pulling Large pulling eye rotates freely and can be used as a carrying handle when the dispenser is empty Size Capacity Weight 13-1/2" (343 mm) H x 26" (660 mm) D One 250' (76 m) coil of 14/2, 14/3, 12/2, or 12/3 armored cable or romex. 32 lbs. (14 kg) Armored Cable Dispenser Caddy Basket Cable Dispenser STUD MOUNT CADDY Fits both 2x4 and 2x6 studs Dispense coils of NM-B or armored cable Swivel eyelet eliminates tangles Size Max Capacity Weight 29-1/2" (749 mm) H x 20-3/4" (527 mm) W 100 lbs. (45.4 kg) 10.5 lbs. (4.8 kg) Stud Mount Dispenser 436 TRUSTED SINCE 1862