Elektro GmbH & Co. KG 126xxx 450 FU-HS 128 (Rev01_120529)
|
|
- Jewel Scott
- 7 years ago
- Views:
Transcription
1 Easyclick 450 FU-HS 128 Configuration tool Elektro GmbH & Co. KG 126xxx 450 FU-HS 128 (Rev01_120529)
2 Elektro GmbH & Co. KG Easyclick 450 FU-HS 128 GB Quick Guide Configuration tool hand-held transmitter Page 3 27
3 Contents GB Application... 4 Preface...4 System requirements...4 Quick Installation...4 PROGRAMMING SEQUENCE... 5 Handheld transmitter programming example... 5 Programming... 6 Software structure...6 Programming channels...7 Parameterizing channels...8 Timers...9 User function...13 Programming - Userfunction...14 Example...17 Assigning channels...18 Transferring the project...20 Reading out the project...22 Setting options...24 Deleting the handheld transmitter's memory Firmware update Notes GB - 3
4 INTRODUCTION Preface This tool enables fast and easy programming of the EasyClick 450 FU-HS128 handheld transmitter. You can also use it to update the firmware and to programme appropriate timers and user functions. System requirements Operating system Windows XP, or higher. USB connection for communication. Approx.10 MB free memory on the hard drive. A PDF reader for reading the documents. Quick Installation As the software does not need to be installed and registered with the operating system, the file can be copied into any directory and opened immediately. GB - 4
5 PROGRAMMING SEQUENCE GB Handheld transmitter programming example Living room Light on Light off Two steps are needed to programme the node in the handheld transmitter. First, all of the channels are programmed. They represent the various switching units, such as lamps, etc. Optional user functions and timers can also be programmed. The "node" is then created on the handheld transmitter. For this purpose, nodes are created that permit functions to be combined into function groups. The previously defined channels can then be assigned to these nodes. Finally, the programme is transferred across, so that the handheld transmitter is initialized with the predefined node structure. GB - 5
6 Software structure Upload the programme to the handheld transmitter Download the programme from the handheld transmitter Save project in a new file Save project Open project Create new project GB - 6
7 GB Programming channels Select the tab "Channel definition" to programme a channel. Drag & drop or double click on a template to import a channel into the "Programming" field. GB - 7
8 Parameterizing channels Once a channel has been set up, it appears in the programming list and can be selected by mouse click. The name of the channel and the icon you want displayed on the handheld transmitter can now be entered and/or selected. Channel name to be displayed on the handheld transmitter Selected icon Notes and comments can be filed in the Notes box. Note: Channel names must not be longer than 16 characters. Channel addresses are automatically assigned and cannot be altered. GB - 8
9 GB Timers Use the "Timer" tab to programme and set timers. Set new timers List of all existing timers Timer parameters GB - 9
10 Once the timer has been programmed, the appropriate channel must be assigned to it by dragging & dropping the channel on the timer. Finally, select the appropriate parameters of the timer: GB - 10
11 GB Function Short pressure Long pressure Switches on the lights Shutter function (permanent) Activated times Key 0 activated Key I activated Key 0 turns the lights off or opens the shutters Key I turns the lights on or closes the shutters Switching times Switching time 0 / 1 The respective switching time for key 0 or 1 Switching days Mo, Tue, We, Su. The respective day on which the timers must be activated GB - 11
12 Example: Our example shows the following time function: The lights in the living room are programmed to come on during the week (Mo, Tu, We, Th, Fr) at 21:00 and to go off again at 22:30. GB - 12
13 GB User functions User functions are functional sequences that can automatically perform up to 16 actions by pressing just one key. They can be started, not just from the menu, but also from the quick-dial keys or timers. Fundamental time sequence of a user function: Start delay times Finish Lighting 1 on Lighting 2 off Roller shutter 1 down Roller shutter 2 down Time In this example, light 1 is turned on and light 2 off after a brief delay. Once this has happened, shutter 1 closes, followed somewhat later by shutter 2. GB - 13
14 Programming - User functions As with node programming, the appropriate channels must first be set up in the "Channel definition" tab. The user functions can then be defined in the "User functions" tab, by first setting up a new function. Set up a new function. GB - 14
15 GB The channels you want to call up using the user function are then dragged & dropped into this function. GB - 15
16 The parameters can then be individually defined for each function: Key-ID Start delay Push time 0 Off, Raise, Darker 1 On, Lower, Brighter x Sek. ( Sek.) x Sek. (0-255 Sek.) Delay in seconds between starting the user function and performing the action The push time is the time between pressing and releasing a key, i.e. it emulates the action of pressing a key. GB - 16
17 Example The following parameters have been set in our example: GB Action Key-ID Start delay Push time Lighting 1 1 1s 0s Lighting 2 0 1s 0s Roller shutter 1 1 2s 4s Roller shutter 2 1 3s 5s Lighting 1 Lighting 2 Roller shutter 1 Roller shutter 2 Start Finish GB - 17
18 Assigning channels Select the "Nodes" tab to assign channels to a list. Each channel can only be added to a "node" once. The same channel can, however, be used in other nodes. Set up a new node GB - 18 Using the "New Node" button, you can set up as many as 32 nodes for programming. They appear in the list below.
19 GB The previously programmed channels are then dragged & dropped onto the required nodes. Set up a new node No more than 32 nodes with max. 32 entries can be administered! GB - 19
20 Transferring the project The project is transferred to the handheld remote using the "Transfer project" menu item or tool button. When transferring a project, a window opens asking for selection of the serial interface if not already correctly set. If the handheld transmitter is connected to your PC, you can use the "Search for device" button to automatically search for the transmitter and programme the setting. Caution: The first handheld remote to be found is always used. GB - 20
21 GB Press the "Transfer" button to transfer the entire project to the handheld transmitter. Transfer progress is displayed and continuously updated. Once the transfer is complete, press "Close". Note: Errors that occur during transmission are marked red in the transfer protocol. GB - 21
22 Reading out the project The project is read out from the handheld transmitter using the "Download..." menu item or tool button. Caution: A project must not be open in the configuration tool! When reading out a project, a window opens asking for selection of the serial interface if not already correctly set. If the handheld transmitter is connected to your PC, you can use the "Search for device" button to automatically search for the transmitter and programme the setting. GB - 22
23 GB Press the "Download" button to transfer the entire project to the configuration tool. Transfer progress is displayed and continuously updated. Once the transfer is complete, press "Close". Note: Errors that occur during readout are marked red in the transfer protocol. GB - 23
24 Setting options The folder for saving projects is selected using menu item "Settings -> Options -> Folder for project files". The serial port to which the handheld transmitter is connected is also selected here. Receive timeout defines the length of time for which the handheld remote must wait for a software telegraph. Caution: Receive timeout should only be altered by service technicians! GB - 24
25 GB Deleting the handheld transmitter's memory A project can be deleted from the handheld transmitter using menu item "Transfer Clear memory of remote control". Confirm The security question, "Clear memory of remote controller. Are you sure?", helps to prevent unintentional deletion of the project and must be answered. Yes No Caution: If you have saved the project elsewhere, it will be deleted irrevocably! GB - 25
26 Firmware update Firmware updates are started in the menu Transfer Firmware update. The appropriate firmware file must first be selected. The subsequent transfer procedure is the same as for project transfers. Caution: Transfer and installation take several minutes, during which you must not disconnect the device from the USB! GB - 26
27 Notes GB General notes! This manual is for information purposes only, is subject to change without notice, and does not constitute any obligation on the part of PEHA Elektro GmbH & Co. KG. PEHA Elektro GmbH & Co. KG accepts no responsibility or liability for any errors and misleading information in this manual. No part of this publication may be reproduced using any means, stored in a data processing system or transferred by electronic, mechanical or other means without the prior written consent of PEHA Elektro GmbH & Co. KG. GB - 27
28 PEHA Elektro GmbH & Co. KG Postfach 1727 D Lüdenscheid Tel.: +49 (0) Fax: +49 (0) Internet:
Installing Remote Desktop Connection
SETTING UP YOUR REMOTE DESKTOP This section will assist you in setting you Remote Desktop Connection. This will allow you to create an icon for easy access to your virtual desktop. DISCLAIMER: All images
More informationMidland BT Updater BTUpdater Program Program file (x86) ), Midland
Midland BT Updater After you downloaded the BT Updater setup application from the web site, double click on it and follow the installation procedure. The BTUpdater application is automatically installed
More informationJob Aid: Creating Additional Remote Access Logins
This job aid describes the steps required to add an additional remote access login to the Avaya S8300, S8500, and S8700 Series Media Servers. These logins may be used to establish a Point to Point Protocol
More informationManual. PC-Software Save`n carry PP 50 pro
Manual PC-Software Save`n carry PP 50 pro Directory 1 Directory 1 Directory... 2 2 Introduction... 3 2.1 Product description... 3 2.2 Pictograms... 3 2.3 Software installation... 4 2.4 Hardware installation...
More informationHypercom Key Loading and Management (HKLM) RS232 PPP Key Injection PC Setup Guide
Hypercom Key Loading and Management (HKLM) RS232 PPP Key Injection PC Setup Guide Hypercom Corporation 8888 East Raintree Drive Scottsdale, Arizona 85260 USA Corporate Telephone: 480.642.5000 Corporate
More informationtesto easyheat Configuration and Analysis software Instruction manual
testo easyheat Configuration and Analysis software Instruction manual en 2 General Information General Information This documentation includes important information about the features and application of
More informationRTI Integration Release Notes
RTI Integration Release Notes Content Introduction...1 Connecting the XP-3 controller to the ClareHome data network...2 Configuring with Integration Designer...2 Configuring in Fusion...6 Button IDs and
More informationSelect Correct USB Driver
Select Correct USB Driver Windows often installs updated drivers automatically, and defaults to this latest version. Not all of these drivers are compatible with our software. If you are experiencing communications
More informationCaplio Utility for Windows
Caplio Utility for Windows Operation Manual English To ensure correct use of the product, read this manual carefully before use. Keep the manual handy for future use. Introduction Thank you for purchasing
More informationInstruction manual. testo easyheat Configuration and Analysis software
Instruction manual testo easyheat Configuration and Analysis software en 2 General Information General Information This documentation includes important information about the features and application of
More informationLPR for Windows 95/98/Me/2000/XP TCP/IP Printing User s Guide. Rev. 03 (November, 2001)
LPR for Windows 95/98/Me/2000/XP TCP/IP Printing User s Guide Rev. 03 (November, 2001) Copyright Statement Trademarks Copyright 1997 No part of this publication may be reproduced in any form or by any
More informationUser s Manual for Fingerprint Door Control Software
User s Manual for Fingerprint Door Control Software Foreword The naissance of F7 indicated that fingerprint reader enters into professional door control domain. That s why we developed this software to
More informationOperating instructions TSE Wireless Software Home
Operating instructions TSE Wireless Software Home Table of contents 1. GENERAL 2 2. INSTALL SOFTWARE 2 2.1. Installation in Windows XP 2 2.2. Installation in Windows Vista 3 3. THE PROGRAM 0 3.1. Setup
More informationHOW TO TRANSFER FILES BETWEEN EEN IDL7000 PVR AND USB2 DEVICE
HOW TO TRANSFER FILES BETWEEN EEN IDL7000 PVR AND USB2 DEVICE CONTENTS CONTENTS...2 FOREWORD...3 TRANSFERRING FILES BETWEEN IDL7000M PVR AND USB2 DEVICE...4 CONNECTING AN EXTERNAL USB2 DEVICE...4 COPYING
More informationSystem Firmware Update (Version 1.11) Instructions for Pioneer AppRadio 4 (SPH-DA120) In-dash Multimedia Receiver
System Firmware Update (Version 1.11) Instructions for Pioneer AppRadio 4 (SPH-DA120) In-dash Multimedia Receiver IMPORTANT Please download and print these Firmware Update instructions before downloading
More informationSection 8 Scheduler. Alcatel-Lucent OmniVista 4760 Network Management System
Alcatel-Lucent OmniVista 4760 Network Management System Section 8 Scheduler Alcatel-Lucent OmniVista 4760 Network Management System All Rights Reserved Alcatel-Lucent 2011 Legal notice: Alcatel, Lucent,
More informationSystem Firmware Update Instructions for AVH-4000NEX
System Firmware Update Instructions for AVH-4000NEX IMPORTANT Please download and print these firmware update instructions before downloading and installing the firmware update. It is important that you
More informationModel 288B Charge Plate Graphing Software Operators Guide
Monroe Electronics, Inc. Model 288B Charge Plate Graphing Software Operators Guide P/N 0340175 288BGraph (80207) Software V2.01 100 Housel Ave PO Box 535 Lyndonville NY 14098 1-800-821-6001 585-765-2254
More informationFileMover 1.2. Copyright Notice. Trademarks. Patents
FileMover 1.2 Copyright Notice No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language, in any form or by
More informationISK 200 Driver Installation
Driver Installation HB_ISK200_E_V10.doc 1 GENERAL 1. GENERAL When connecting an interface converter ISK 200 to a PC an USB driver has to be installed to recognize the ISK 200. On the enclosed CD-ROM the
More informationFirmware Update Instruction Manual
Firmware Update Instruction Manual This manual explains the procedures for downloading the CX2 firmware from the Ricoh website and updating the camera s firmware. Perform the following operations to update
More informationRemote Monitoring and Control of the R&S FSL with a Web Browser
Rohde & Schwarz Products: R&S FSL3, R&S FSL6, R&S FSL18 Remote Monitoring and Control of the R&S FSL with a Web Browser Application Note This application notes describes remote operation or monitoring
More informationOptional Bluetooth Firmware Update HW05-SW01.27.20 Enables Bluetooth AVRCP control and metadata display for iphone 5 and ios 6 users.
January 29, 2013 Optional Bluetooth Firmware Update HW05-SW01.27.20 Enables Bluetooth AVRCP control and metadata display for iphone 5 and ios 6 users. IMPORTANT Please download and print these Bluetooth
More informationEclipse 180 User s Manual
Eclipse 180 User s Manual Congratulations on purchasing your Eclipse Personal Media Player! To get the most out of your purchase, please take the time to carefully read through this manual. Foreword If
More informationWindows XP Home Edition / Windows XP Professional
Windows XP Home Edition / Windows XP Professional COOLPIX5000/995/885/775 This manual is for those users of the COOLPIX5000/995/885/ 775 who are running Nikon View 4 (Version4.3.1) under Windows XP Home
More informationPN-L702B LCD MONITOR TOUCH PANEL DRIVER OPERATION MANUAL. Version 2.1
PN-L702B LCD MONITOR TOUCH PANEL DRIVER OPERATION MANUAL Version 2.1 Contents Setting up the PC...3 Installing the touch panel driver...3 Touch Panel Settings...4 How to configure settings...4 Calibration...5
More informationInstructions for the installation of drivers and data reading software (TOOLBOX 4) The simple and reliable way to measure radioactivity.
The simple and reliable way to measure radioactivity. Instructions for the installation of drivers and data reading software (TOOLBOX 4) EN 06/2015 2015 GAMMA-SCOUT GmbH & Co. KG Instructions for Driver
More informationConnecting your Omega/BetaPAT PLUS to a PC via a USB
Connecting your Omega/BetaPAT PLUS to a PC via a USB Install software Windows XP and below Insert the disc into your computers disc drive and run through the setup wizard. Windows Vista & 7 1. Insert the
More informationTraining Document for Comprehensive Automation Solutions Totally Integrated Automation (T I A) MODULE A5 Programming the CPU 314C-2DP
Training Document for Comprehensive Automation Solutions Totally Integrated Automation (T I A) MODULE T I A Training Document Page 1 of 25 Module This document has been written by Siemens AG for training
More informationConfiguring the WT-4 for Upload to a Computer (Ad-hoc Mode)
En Configuring the WT-4 for Upload to a Computer (Ad-hoc Mode) Windows XP This document provides basic instructions on configuring the WT-4 wireless transmitter and a Windows XP Professional SP2 computer
More informationRemote Access. Connecting to your computer from home
Remote Access Connecting to your computer from home IT Desktop Support Client and Research Services October 2009 2 Contents Overview 3 Windows 4 Setup 4 Remote Desktop 4 From work 4 From home 4 Installing
More informationFACTORY AUTOMATION MANUAL USB VIRTUAL COM PORT DRIVER INSTALLATION UNDER WINDOWS XP/WINDOWS 2000
FACTORY AUTOMATION MANUAL USB VIRTUAL COM PORT DRIVER INSTALLATION UNDER WINDOWS XP/WINDOWS 2000 With regard to the supply of products, the current issue of the following document is applicable: The General
More informationF-Series Desktop User Manual F20. English - Europe/New Zealand
F-Series Desktop User Manual F20 en English - Europe/New Zealand Contents Key to icons and text...3 What is F-Series Desktop?...4 How do I install F-Series Desktop onto my computer?...4 How do I subscribe
More informationCelluon Laserkey - User Guide for Microsoft Windows XP
Celluon Laserkey - User Guide for Microsoft Windows XP INDEX 1. System Requirements... 2 2. Installation / Uninstalling the Driver... 2 3. Bluetooth dongle software settings... 3 4. Connection Method...4
More informationRemote Monitoring and Control of the R&S FSV with a Web Browser
Rohde & Schwarz Products: R&S FSV3, R&S FSV7, R&S FSV13, R&S FSV30 Remote Monitoring and Control of the R&S FSV with a Web Browser Application Note This application note describes remote operation or monitoring
More informationSOFTWARE MANUAL. Please ensure that you read the instruction manual carefully before use. About software
SOFTWARE MANUAL Please ensure that you read the instruction manual carefully before use Software Notes The attached software is a camera driver and image editing software tool for Windows. Under no circumstances
More informationNCD ThinPATH Load Balancing Startup Guide versions 2.0.7 and 2.8.1
NCD ThinPATH Load Balancing Startup Guide versions 2.0.7 and 2.8.1 Copyright Copyright 2003 by Network Computing Devices, Inc. (NCD).The information contained in this document is subject to change without
More informationManual English KOI Desktop App 2.0.x
Manual English KOI Desktop App 2.0.x KOI Kommunikation, Organisation, Information Comm-Unity EDV GmbH 2010 Contents Introduction... 3 Information on how to use the documentation... 3 System requirements:...
More informationRako Lighting Driver. For use with: Driver software written and provided by:
Rako Lighting Driver For use with: Driver software written and provided by: Introduction This document is a guide to integrating a Rako Lighting system with an RTI control system, via a Rako Ethernet bridge.
More informationNokia Internet Modem User Guide
Nokia Internet Modem User Guide 9216562 Issue 1 EN 2009 Nokia. All rights reserved. Nokia, Nokia Connecting People and Nokia Original Accessories logo are trademarks or registered trademarks of Nokia Corporation.
More informationColorfly Tablet Upgrade Guide
Colorfly Tablet Upgrade Guide (PhoenixSuit) 1. Downloading the Firmware and Upgrade Tool 1. Visit the official website http://www.colorful.cn/, choose 产 品 > 数 码 类 > 平 板 电 脑, and click the product to be
More informationNetwork/Floating License Installation Instructions
Network/Floating License Installation Instructions Installation steps: On the Windows PC that will act as License Manager (SERVER): 1. Install HASP Run-time environment, SERVER 2. Plug in the red USB hardware
More informationWireless LAN 802.11g USB Adapter
Wireless LAN 802.11g USB Adapter User s Guide Version 1.0 User s Guide 0 Copyright statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by
More informationCOBRA 18R2 Wired Reprogramming Instructions
COBRA 18R2 Wired Reprogramming Instructions The purpose of this document is to perform a wired reprogram of an 18R2 using the COBRA wired reprogrammer. Please note that this process requires only a wired
More informationConfiguring Windows 7 64 bit for AutoVISION
This document will describe how to configure a 64 bit version of Windows 7 Professional, Ultimate or Enterprise to utilize the Windows XP Mode (Virtual PC) capabilities to allow AutoVISION to be used in
More informationCombi B PC software 8213X. Installation and operating instructions
Combi B PC software 8213X Installation and operating instructions EN Table of Contents 1 Important notes... 3 2 Glossary of abbreviations and terms... 4 3 Symbols and special font types used... 5 4 Scope
More informationDTAP3000 DTSX3000 Control Visualization Software LAS2.0 Data Conversion Guide
User s Manual DTAP3000 DTSX3000 Control Visualization Software LAS2.0 Data Conversion Guide 1st Edition Blank Page < Introduction > i Introduction About this Manual Thank you for purchasing the DTSX3000
More informationWattbike Power Cycling Studio Edition. User Manual
Wattbike Power Cycling Studio Edition User Manual Contents Overview...3 Minimum System & Set up Requirements...4 Installation of Power Cycling Studio Edition...5 Set up/wiring Diagram... 6 Connecting Bikes
More informationVP-ASP Shopping Cart Quick Start (Free Version) Guide Version 6.50 March 21 2007
VP-ASP Shopping Cart Quick Start (Free Version) Guide Version 6.50 March 21 2007 Rocksalt International Pty Ltd support@vpasp.com www.vpasp.com Table of Contents 1 INTRODUCTION... 3 2 FEATURES... 4 3 WHAT
More informationEnVivo 4 GB Aluminum MP3 Player
User Manual EnVivo 4 GB Aluminum MP3 Player With Clipper, Display & Voice Recording Electrical and electronic equipment (EEE) contains materials, parts and substances, which can be dangerous to the environment
More informationLaptop Recorder OPERATION GUIDE. Laptop Serial Number (System ID): Original Seneca Data Order Number: SoniClear Order Number:
Laptop Recorder OPERATION GUIDE Laptop Serial Number (System ID): Original Seneca Data Order Number: SoniClear Order Number: SoniClear Purchase Date: About This Manual This manual covers the installation
More informationUsing a USB to Serial adapter and Terminal Emulator in Windows 7 to communicate with a DM101
Using a USB to Serial adapter and Terminal Emulator in Windows 7 to communicate with a DM101 Z Technology Application Note No: 40 This application note outlines the simple process of installing and using
More informationMy home. Mobile phone application. Instructions for use and installation. For DELTA DORE GSM transmitters and transmitter control units.
My home Mobile phone application For DELTA DORE GSM transmitters and transmitter control units Instructions for use and installation My home Alarm Heating Bedroom Dining room Kitchen Garage Absence Messages
More informationThis manual assumes you already have Precurio installed and configured appropriately.
Precurio Workflows As you must already know, workflow applications help automate processes that require series of steps usually requiring human intervention, such as an approval from various people in
More informationIX Support Tool Setting Manual
IX System IP network-compatible intercom IX Support Tool Setting Manual Software version 2.0.0.0 or later Before configuring and using the system, read Setting Manual and Operation Manual (PDF) carefully.
More informationFiery E100 Color Server. Welcome
Fiery E100 Color Server Welcome 2011 Electronics For Imaging, Inc. The information in this publication is covered under Legal Notices for this product. 45098226 27 June 2011 WELCOME 3 WELCOME This Welcome
More informationAUDITVIEW USER INSTRUCTIONS
COMBOGARDPRO AUDITVIEW USER INSTRUCTIONS The ComboGard Pro AuditView software allows the Manager to view, save, and print the audit records. The ComboGard Pro lock maintains the last 63 lock events in
More informationSCU-18 PC Connection Cable Driver Installation Manual
SCU-18 PC Connection Cable Driver Installation Manual Installing the SCU-18 PC Connection Cable driver software on a computer makes possible data transmission and updating the transceiver firmware. Please
More informationQQConnect Overview Guide
QQConnect Overview Guide Last Updated: 3/20/2015 About QQConnect QQConnect is an add-on utility for QQCatalyst that makes it easy to transfer documents and e- mails from your Windows desktop or desktop
More informationEasyMP Monitor Operation Guide Ver.4.50
EasyMP Monitor Operation Guide Ver.4.50 Notations Used in This Guide The following table shows the symbols used in this manual, along with descriptions of what they mean. Attention s Indicates procedures
More informationAdministration guide. Océ LF Systems. Connectivity information for Scan-to-File
Administration guide Océ LF Systems Connectivity information for Scan-to-File Copyright 2014, Océ All rights reserved. No part of this work may be reproduced, copied, adapted, or transmitted in any form
More informationScotEID Desktop Quick Start Guide
ScotEID Desktop Quick Start Guide Last updated 16/01/2013 Table of Contents Table of Contents Supported Readers Installation Java Runtime Environment ScotEID Desktop Configuration General Default Lot ScotEID
More informationApplication Unit, MDRC AB/S 1.1, GH Q631 0030 R0111
, GH Q631 0030 R0111 SK 0010 B 98 The application unit is a DIN rail mounted device for insertion in the distribution board. The connection to the EIB is established via a bus connecting terminal at the
More informationWeather Direct Displays show Lost Forecast (blank boxes in the picture icons)
Weather Direct Displays show Lost Forecast (blank boxes in the picture icons) Many routine events can cause a Lost Forecast situation. Examples include: Power outage Change batteries Internet down in your
More informationivms-4200 Client Software Quick Start Guide
ivms-4200 Client Software Quick Start Guide Notices The information in this documentation is subject to change without notice and does not represent any commitment on behalf of HIKVISION. HIKVISION disclaims
More informationFTP Updates. Hiden Analytical Limited 420 Europa Boulevard Warrington WA5 7UN England. Tel: +44 (0)1925 445225 Fax: +44 (0)1925 416518
ANALYTICAL FTP Updates Hiden Analytical Limited 420 Europa Boulevard Warrington WA5 7UN England Tel: +44 (0)1925 445225 Fax: +44 (0)1925 416518 E-mail: info@hiden.co.uk Web site: http://www.hidenanalytical.com
More informationApplication Note. Example of user log on Magelis HMI with XB5S5B2L2 biometric switch. Advanced Technical Support - Brazil. Version: 1.
Application Note Example of user log on Magelis HMI with XB5S5B2L2 biometric switch. Version: 1.0 Advanced Technical Support - Brazil Technical Specifications Hardware: Firmware: HMIGTO4310 XB5S5B2L2 Software:
More information1. Central Monitoring System Software
1. Central Monitoring System Software 1-1. General information CMS program is an application with which users not only watch and control remote DVRs, but also receive video/audio data or alarm signals
More informationViviCam 25 Digital Camera User s Manual
ViviCam 25 Digital Camera User s Manual 2010 Sakar International, Inc. All rights reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are the
More informationMoxa Device Manager 2.0 User s Guide
First Edition, March 2009 www.moxa.com/product 2009 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. Moxa Device Manager 2.0 User Guide The software described in this manual
More informationQIAsymphony Management Console User Manual
April 2012 QIAsymphony Management Console User Manual For use with software version 4.0 Sample & Assay Technologies Trademarks QIAGEN, QIAsymphony, Rotor-Gene (QIAGEN Group). InstallShield (Informer Technologies,
More informationGEIGER COUNTER "Gamma Check Pro"
GEIGER COUNTER "Gamma Check Pro" OPERATING INSTRUCTIONS FOR THE SOFTWARE Item no. 1377508 VERSION 11/15 TABLE OF CONTENTS Page 1. Functions of the Software... 3 2. Software/Driver Installation... 3 3.
More informationWindows XP.. ELITE Firmware Update procedures.. v1.41
Windows XP.. ELITE Firmware Update procedures.. v1.41 Download and Extract the ELITE update. Note.. Please ensure you are logged in to Windows as an Administrator before carrying out the instructions in
More informationCreating a Web Site with Publisher 2010
Creating a Web Site with Publisher 2010 Information Technology Services Outreach and Distance Learning Technologies Copyright 2012 KSU Department of Information Technology Services This document may be
More informationAccess your directories (home directory and shared directories) outside Tilburg University
Access your directories (home directory and shared directories) outside Tilburg University FileZilla offers you the possibility to access your personal M-drive or other network locations through a secure
More informationAS-525. AxTrax Access Control Management Software. Software Manual
AS-525 AxTrax Access Control Management Software Software Manual August 2010 Table of Contents Table of Contents 1. Introduction... 5 1.1 System Features... 5 1.1.1. Access Control... 6 1.1.2. Access
More informationhttp://www.heitel.com/en/service/downloads/?dir=01-demosoftware/01-camcontrollite#01-demosoftware
Technical Product Information No. 14.01 Product/Version CamDisc SVR, CamTel SVR und Cam4mobile, CamDisc SVR 10s, CamDisc SVR 4s, CamServer 1, CamServer 2c und CamServer 2, CamDisc HNVR, CamServer VG 2c/4c,
More informationUsbCom Standard / Professional Software
Operating instructions UsbCom Standard / Professional Software 3759562 Version 2.1 0612 Contents Introduction...3 Installation...3 Start program...4 Menu bar and configuration...5 1. Program...5 1.1 Close
More informationTelekom Communication Center User manual. version 4.2
Telekom Communication Center User manual version 4.2 Contents Introduction... 3 System requirements... 4 Installation... 5 Usage... 13 TCC window... 14 Connecting to internet... 15 Installing new phone...
More informationDIGICLIENT 8.0 Remote Agent Software
DIGICLIENT 8.0 Remote Agent Software MODEL: D17800 Series Instruction Manual English Version 1.0 Copyright 2007 Digimerge Technologies Inc Table of Contents Table of Contents About the DigiClient 8.0...
More informationPage 1 S5.5 Monitoring Software Manual Rev 1.2 for Software Ver 1.0
Trantec S5.5 Monitoring Software Manual Initial Setup Minimum PC Requirements 1.6 GHz CPU, 256 MB Memory, 1 available USB port, Windows XP Recommended PC >2.0 GHz CPU, 512 MB (XP) 1 GB (Vista) memory,
More informationNCD ThinPATH Load Balancing Startup Guide
NCD ThinPATH Load Balancing Startup Guide Copyright Copyright 1999 by Network Computing Devices, Inc. (NCD).The information contained in this document is subject to change without notice. Network Computing
More informationMy home Mobile phone application
My home Mobile phone application Instructions for use and installation Alarm Heating Bedroom Living room Kitchen Garage Arrived Message Contents 1- Presentation................................................3
More informationOperating Instructions 3-349-831-03 1/10.14
Operating Instructions 3-349-831-03 1/10.14 Contents 1. Applications... 4 2. System Requirements for GMST... 5 3. Installation... 6 4. First start... 9 5. Software registration... 10 5.1. First registration...
More informationEasyMP Monitor Operation Guide Ver.4.40
EasyMP Monitor Operation Guide Ver.4.40 2 Notations Used in This Guide The following table shows the symbols used in this manual, along with descriptions of what they mean. Caution q s Indicates procedures
More informationTutorial How to upgrade firmware on Phison S8 controller MyDigitalSSD using a Windows PE environment
Tutorial How to upgrade firmware on Phison S8 controller MyDigitalSSD using a Windows PE environment Version 2.0 This tutorial will walk you through how to create a bootable USB drive to enter into a WINPE
More informationSchneider OS-Loader usage via Ethernet or USB.
LHC Gas Systems 28 th February, 2007 Schneider OS-Loader usage via Ethernet or USB. Jacques ROCHEZ - IT/CO/FE Abstract This document is a guideline on how to configure correctly a PC for the use of the
More information1. Installing The Monitoring Software
SD7000 Digital Microphone Monitor Software manual Table of Contents 1. Installing The Monitor Software 1.1 Setting Up Receivers For Monitoring 1.2 Running The Application 1.3 Shutdown 2. The Detail Monitoring
More informationMotor control and protection unit MCUSetup user guide
Motor control and protection unit MCUSetup user guide Table of contents The information in this document is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes
More information1. Central Monitoring System Software
1. Central Monitoring System Software 1-1. General information CMS program is an application with which users not only watch and control remote DVRs, but also receive video/audio data or alarm signals
More informationUSER S MANUAL LEN15M
USER S MANUAL LEN15M LEN 15M MAJORCOM FEATURES - REPRODUCTION METHOD AND SOUND QULITY Can reproduce and record high sound quality of sound by using 256kbps transmission rate on MP3 method. - STORAGE CAPACITY
More informationTECHNICAL BULLETIN. Configuring Wireless Settings in an i-stat 1 Wireless Analyzer
i-stat TECHNICAL BULLETIN Configuring Wireless Settings in an i-stat 1 Wireless Analyzer Before configuring wireless settings, please enable the wireless functionality by referring to the Technical Bulletin
More information799 000 678 / Rev. 0 / 2013-03-26. Quick Guide for FDT Basic-Tool and Backup-Tool P40-SERIES
799 000 678 / Rev. 0 / 2013-03-26 Quick Guide for FDT Basic-Tool and Backup-Tool P40-SERIES Publisher ELGO Electronic GmbH & Co. KG Carl-Benz-Straße1 DE-78239 Rielasingen Technical Support +49 (0) 7731
More informationInteractive Whiteboard Functionality Overview... 4. Choosing Pen Style... 5. Erasing / Modifying Writing... 6. Undo / Redo... 6. Email...
Quick Start Guide 1 Stand-alone Usage Interactive Whiteboard Functionality Overview... 4 Choosing Pen Style... 5 Erasing / Modifying Writing... 6 Undo / Redo... 6 Email... 7 Import / Open file... 7 Saving
More informationOperating instructions TSE Wireless Software Business +
Operating instructions TSE Wireless Software Business + Contents 1. GENERAL 2 2. INSTALL SOFTWARE 2 2.1. Installation with Windows XP 2 2.2. Installation with Windows Vista 3 3. THE PROGRAM 7 3.1. Setup
More informationWorking with H-drive, I-drive, and DropBox Files Online
Working with H-drive, I-drive, and DropBox Files Online Preamble: Students and Staff have both individual networked storage space (referenced on-campus as the H-drive) and shared storage space (referenced
More informationInstructions for Downloading & Using Aurora Toolbox
Instruction Guide: INSTRUCTION GUIDE: DOWNLOADING & USING AURORA TOOLBOX Instructions for Downloading & Using Aurora Toolbox Downloading and Installing the Aurora Toolbox Program The Aurora Toolbox is
More informationNetDisk & NetDisk Mini
HANTZ + PARTNER The Upgrade Company! www.hantz.com Quick Install Guide For Windows 2000 / XP Software Version 2.3 NetDisk & NetDisk Mini Powered by Technology www.ximeta.de HANTZ + PARTNER The Upgrade
More informationAvalanche Site Edition
Avalanche Site Edition Version 4.8 avse ug 48 20090325 Revised 03/20/2009 ii Copyright 2008 by Wavelink Corporation All rights reserved. Wavelink Corporation 6985 South Union Park Avenue, Suite 335 Midvale,
More informationTSE Administration Software
TSE Administration Software Dear customer, Thank you very much for having chosen a lock administration software by BURG- WÄCHTER. It is available in 4 different versions, which are optimally adapted to
More information