KLEIN UTILITY TOOLS & MISC.

Transcription

1 July 2015 Utilities

2 2

3 Contents Chicago Grips Parallel Jaw Grips Haven Grips Cable Tensioning Tools Tool Pouches Canvas Buckets Voltage Detectors Wrenches Information, Care and Maintenance

4 Grips CHICAGO GRIPS Hamer Klein KE Cable Application Jaw Shape Cable Specifications External Ø Range (inches) External Ø Range (mm) Max Safe Load (kg) KE Copper (stranded) or aluminium ACSR Ο KE KE KE K Extra high-strength cables or guy KE strands KE K PVC covered Ο K conductor KE Small bare cables PARALLEL JAW GRIPS Hamer Klein Cable Application Jaw Shape Cable Specifications External Ø Range (inches) External Ø Range (mm) Max Safe Load (kg) K PVC covered Ο KE400 * or bare cable * Available on request only HAVEN GRIPS * Hamer Klein Cable Application External Ø Range (inches) Cable Specifications External Ø Range (mm) Max Safe Load (kg) KE Steel strand KE Wire rope * Use where conductor damage is not a factor. 4

5 CABLE TENSIONING TOOLS Hamer Klein Description KE N Howe wire tool, 25mm nylon webbing strap with swivel hook 227 Kg max safe load KE1350 KN1500P-EX Web-strap ratchet hoist 680 to 1361 Kg max load rating K90 KE490 H S H S SR Block & tackle (supplied with 259 swivel anchor hook, block with guarded snap hooks, 25 rope & block with guarded snap hook with eye for rope tie-off ) Block & tackle (supplied with 259 swivel anchor hook, block with guarded snap hooks & block with guarded snap hook with 25 spliced rope attached to eye) KE110 K90 KE1350 5

6 TOOL POUCHES Hamer Klein KL KL Description 8 pocket tool pouch made from soft, pliable white leather. Riveted and stitched for extra durability. Tunnel loop belt connection. Belt width 64mm, overall size 279mm x 254mm. 11 pocket tool pouch, made from soft, pliable leather. Moisture resistant, riveted and stitched. Slotted belt connection. Belt width 70mm, overall size 254 mm x 267mm. KL4985 CANVAS BUCKETS WITH POLYPROPELENE BOTTOMS KL4990 Hamer Klein Description KE #6 Canvas Tapered Wall 305mm Ø to 229mm Ø x 330mm H KE5113S 5113S #6 Canvas Tapered Wall with Swivel Snap 305mm Ø to 229mm Ø x 330mm H KE5103S 5103S #4 HD Canvas Tapered Wall with Swivel Snap 305mm to 229mm Ø x 330mm H KE5109S KE5109PS 5109S 5109PS #6 Canvas Wide-Opening Straight-Wall with Swivel Snap 305mm Ø x 381mm H Load rated to 34Kg max #6 Canvas Wide-Opening Straight-Wall 1 Int. Pocket with Swivel Snap 305mm Ø x 381mm H Load rated to 34Kg max KE5171PS 5171PS #4 HD Canvas Tapered Wall 305mm to 229mm Ø x 305mm H & 4 Ext. Pockets KE5172PS 5172PS #4 HD Canvas Tapered Wall 305mm to 229mm Ø x 305mm H & 15 Int. Pockets KE5113 KE5103S KE5171PS KE5172PS Canvas Weights Info. 1 = Thickest, 8 = Thinnest KE5109S 6

7 VOLTAGE DETECTOR Hamer PET4000 Description V-Watch Personal Voltage Detector VW-20H with carry case Worn on the outside of your clothing at mid-torso, the V-Watch provides that extra level of safety by detecting and alerting you to the presence of electrical fields or energized electrical equipment. In emergencies, you and your crews can move safely to quickly restore power to your customers. The V-Watch comes in a tough nylon carrying case lanyard that is worn around the neck during use. The C-10 Carrying Case Lanyard is made with a black shielded material. Features and Benefits Alerts user to proximity of high voltage Audible and visual alarms increase in frequency the closer the user gets to energized equipment Typical V-Watch initial warning distance is about 7 feet (2.13 m) from a 4kVAC conductor (see instruction manual for more details). Warning distance increases with higher voltages. Provides another level of safety for line crews, storm restoration workers and first responders Low battery indicator Field replaceable 9V battery Rugged protective housing Built-in self test Lightweight Carrying case lanyard Black shielded nylon material Electrically shielded Storage case when the V-Watch is not in use Lanyard allows user to adjust to optimum mid-torso position Comes supplied with the black C-10 carry case pictured. Specifications Sensitivity: Factory Set at 50/60 Hertz sensing threshold (first beep). The V-Watch will only detect AC voltage. Do not use below 2400 Volts line-to-ground. Typical Warning Distance: About 7 feet (2.13 m.) from a 4kV (2.4kV line-to-ground) AC conductor. Operating Temperature: -20 to +120 F (-29 to 49 C) Operating Frequency: 50Hz/60Hz Battery: 9V alkaline 1604A, IEC 6LR61. Life is 2 years in storage, 1 year typical usage. Beeper Sound Pressure Level: 100 decibels Water Withstand: Protected from falling rain per IEC-529, Level 2 Weight (with battery): 5.2 oz. (147 g.) Dimensions: 3.5 x 2.88 x 1.25 (8.89 cm. x 7.32 cm. x 3.18 cm.) Voltage Range: 2400VAC line-to-ground and above MODIEWARK Hamer MWB0033 MWB0022 Description The Modiewark detects the presence of an alternating electric field. Its unique switching action allows identification of A.C. voltage levels from 110v to 330,000 volts. Also available on request: VRS Modiewark version capable of testing 240V, 1KV, 2.2KV, 6.6KV, 11KV and 22KV MWB0011 Modiwark Sunrise Replacement Handle MWB MWB0033

8 Podgy Ratchet Wrench Hamer Description Sizes 18mm PET1317 Ratchet Wrench 13mm / 17mm PET1824 Ratchet Wrench 18mm / 24mm PET1924 Ratchet Wrench 19mm / 24mm 24mm (other side) Other sizes available on indent order: Hamer Description Sizes PET1921 Ratchet Wrench 19mm / 21mm PET2124 Ratchet Wrench 21mm / 24mm PET2430 Ratchet Wrench 24mm / 30mm Ratcheting Construction Wrench Hamer Supplier Description KL /2" square drive Ratcheting Wrench Adj. Construction Wrench Hamer Supplier Description KL Adjustable-head Construction wrench Max size capacity 38mm 8

9 FORGED STEEL GRIPS Klein Chicago and Haven Grips are used to pull wire and cable, and to maintain temporary tension until the cable can be permanently terminated. These grips are not to be used as anchors. Klein Chicago grips have locking loop handles, standard on most grips that allow the jaws to be held in an open position for easier placement on wire or cable. This saves substantial time, and makes grip positioning easier than with wedge or bolt-on designs. To lock, open the jaws and fold loop handle toward the side plates. HOW TO SELECT THE PROPER GRIP Three basic factors determine the selection of the proper grip for each specific application: Type of wire or cable. Outside diameter of wire or cable. Maximum safe load required. Also the correct type of inside jaw contour should be considered. It is essential to select the correct gripping jaws to avoid damage to the wire or cable. When pulling stranded wire, the jaws should be long enough to take a full lay of cable to avoid damage to the conductor. Inside-Jaw Contours: Each grip comes with one of three inside-jaw contours appropriate for the type of wire or cable to be worked. Single V: Simple three-point contact jaws are designed for use on small-diameter bare wire and cable (solid stranded). Double V: Four-point contact provides greater gripping pressure and assures proper alignment of wire and cable within the jaws. Designed for high-strength steel guy wire and messenger wire, and extrahigh-strength cables and conductors. Round: Round jaws provide maximum contact and gripping power to minimize conductor damage. This jaw design is recommended for use on bare aluminium, ACSR, and copper conductors. REPAIR OR REPLACE? Never repair any grip. Grip jaws can sometimes be replaced if the grip is returned to Klein, but structural wear or damage cannot be safely corrected. Grips that are bent, misaligned or otherwise distorted should be discarded and replaced. Before each use, check all grips for jaw condition, proper alignment of jaws and all parts, and possible distortion caused by exceeding safe-load specifications. Grips should operate smoothly. Spring-loaded grips should lock open with loop handle in Down position and should close automatically with loop handle Up. The Klein parallel jaw grip may be tested by opening and closing the jaws by hand, while exercising proper caution. All parts and rivets, which may be distorted due to exceeding safe load, should be checked. RECOMMENDED CARE & MAINTENANCE The following guidelines have been established in order to maintain all grips in good condition: Clean the Grip Jaws Use emery cloth or a clean wire brush to periodically clean the surfaces of grip jaws. (Note: Aluminium-strand conductors may have a die-grease coating, which can deposit on grip jaws. New aluminium conductors should be wiped clean before grip application. Grip jaws should be wiped clean of all grease before use.) Be sure to clean grip jaws before and after each use on wire or cable, which has been galvanized or otherwise coated. Clean All Working Parts Use Klein s Cinch Cleaner/Degreaser Cat. No to clean all joints and moving parts then apply Cinch Yellow No Check All Parts Look carefully for distortion or misalignment. Never Repair Any Grip If there is ever any question about the safe condition of any grip, please consult us directly. Please remember this rule. 9

10 10