Tim Smith - Sales Manager.

Size: px
Start display at page:

Download "Tim Smith - Sales Manager. www.tritech3d.co.uk"

Transcription

1 Tim Smith - Sales Manager

2 Formed 2007 Objet PolyJet Technology Stratasys FDM Technology Stoke on Trent Demonstration Centre UK Service Support Team 2

3 Introducing the Objet 500 Connex 3

4 Objet PolyJet Technology Head A Model Head B Support Model is cured during the build process using UV lamp Gel-like support structure 16-30µ layers

5 CONNEX PolyJet Matrix Technology Model A Model B Support Material

6 CONNEX PolyJet Matrix Technology Combination of 2 x model materials Create 14 x materials in a single model Create Grey scales and a range of shore a values from 27a to 95a DM (Digital Materials) 6

7 A whole new world

8 Product Overview New printer taking Connex to a completely new level! 3 x model materials simultaneously plus support material New printing block (8 E1 SHRs) 3 printing modes (HQ, HS, DM) Envelope: 500mm x 400mm x 200mm (X,Y,Z) All Objet500 Connex capabilities & materials +

9 Product Overview Key Features Vibrant colour in both opaque & colored translucent Simultaneous jetting of 3 base materials; ready-to-print (DM mode), minimal material replacement Simultaneous printing of up to 46 different materials (Compared to the Connex2 14 materials) Digital-ABS with Over-moulding; Mixed part of Digital-ABS with Tango/Vero White or VeroClear Combination of both rigid and flexible colour materials

10 Product Overview Resin Cabinet External cabinet 4 levels of 2 cartridges each 2 X (Model A, Model B, Model C, Support Total of 8 cartridges 28.8 Kg Each of the 4 types of resins double cartridges & hot-swappable Longer un-attended jobs Maximum resin utilization for each cartridge

11 Colour Capabilities 6 Colour base resins - all with Vero properties VeroWhite+ (currently offered) W VeroCyan (new) C VeroMagenta (new) M VeroYellow (new) - Y VeroBlack+ (currently offered) - K VeroClear (currently offered) T 3 x Colour materials can be installed at any given time CMY, CMW, CYW, MYW, CMT, CMK Each combination is referred to as a palette (total 10 palettes)

12 Color Capabilities (Poster)

13 Color Capabilities Each pallet provides 45/46 tints (Tint = Digital Material) The material replacement wizard guides the operator when a palette change is required Color assignment in Objet Studio Per shell (similar to current material assignment) DM mode Colour spectrum on the same model is limited (Not full colour) Designer RP Operator (with Objet Studio) STL file with manual color request

14 Material Assignment OBJET Studio Software

15 Unique Solutions 15

16 Unique Solutions The first combination of multi-colour and multi-material printer offering vibrant colors with 10 x colour pallets The only printer capable of printing colour translucent and rubber-like part combinations Create prototypes that resemble the final product, much earlier in the design process

17 Digital-ABS + Over-Moulding Digital-ABS material for high toughness applications Combining our Digital-ABS with: Rubber-like with ranging shore A levels (27a to 95a) Clear Transparent + Tango rubber-like Coloured opaque (single color)

18 Rubber-like Colour Offering Combinations of two Rigid Materials (CMY) with Rubber Like materials (Tango+,TangoBlack+) Resulting in Pallets combining different ShoreA values (27-95) Introducing new ShoreA values (30,35) Combining colour translucency with ShoreA levels Ideal solution for Sporting Goods, Consumer Goods, Entertainment, Medical and many other sectors

19 Product Positioning Connex500 vs. Objet500 Connex3 Objet500 Connex3 Connex500 Mixed part/mixed tray of 2 materials Dig. ABS Color : Limited scale of shades of grey Colour (10 palettes with 45/46 combinations) Mixed part/mixed tray of 3 materials Digital-ABS+ Tango over moulding Color PJ Rubber / Translucent offering Value

20 Product Benefits Mixed Tray Mixed Part Digital Materials New New New New Digital-ABS with Over-molding Flexible Color Transparent Color Color

21 Value Proposition Final product realism, EARLY in the development process Shorten development process, ensuring its success Rigid & Flex, Opaque & Transparent, Colors & Tinted Translucent all in one part / tray Multi-purpose solution to be used throughout the product development cycle Widest range of modeling applications, from concept modeling to design validation - Ensure higher utilization & quickest ROI Direct & indirect prototyping Colored plastics, opaque & translucent Transparency/Opaque combinations (unique) Vibrant colors, grayscales, tones and tints

22 Life s a lot more colourful with the OBJET500 CONNEX3

23 Thank You, any questions?

Top Five Reasons to Integrate PolyJet Technology into your Product Development Lifecycle

Top Five Reasons to Integrate PolyJet Technology into your Product Development Lifecycle Product Development Lifecycle By Stratasys, Ltd. Rapid prototyping has become a game-changing innovation for designers, engineers and manufacturers since it was introduced two decades ago. Previously,

More information

Top Five Reasons to integrate 3D Printing into

Top Five Reasons to integrate 3D Printing into 12345Your Product Top Five Reasons to integrate 3D Printing into Development Lifecycle to integrate 3D Printing into Your Product Development Lifecycle Rapid prototyping was a game-changing innovation

More information

Rapid Prototyping Technologies. May, 2016

Rapid Prototyping Technologies. May, 2016 Rapid Prototyping Technologies May, 2016 WE HAVE ALL THE NECESSARY TOOLS TO ENSURE THE FINAL SUCCESS OF YOUR PROTOTYPE. Andaltec can help you in all the steps, from the design to fully finished prototype

More information

the future of rapid prototyping

the future of rapid prototyping the future of rapid prototyping welcome to the future We all take for granted the 3D solid modelling software on our desktops, and the ability to print quality rendered images whenever we want them at

More information

WPI Rapid Prototype Guidelines --Read entire document before submitting an order--

WPI Rapid Prototype Guidelines --Read entire document before submitting an order-- WPI Rapid Prototype Guidelines --Read entire document before submitting an order-- It will be assumed that you have read these guidelines. If you do not follow the guidelines during submission, you will

More information

3D Printer Overview 2013

3D Printer Overview 2013 1 PERSONAL 3D PRINTERS Cube Home 3D Printer Our first 3D printer designed to bring your creations to life in brilliant colors right in your home just plug in and print! Wi Fi Printing Print up to a 5.5

More information

PRECISION PROTOTYPING THE ROLE OF 3D PRINTED MOLDS IN THE INJECTION MOLDING INDUSTRY

PRECISION PROTOTYPING THE ROLE OF 3D PRINTED MOLDS IN THE INJECTION MOLDING INDUSTRY By Lior Zonder, Applications Team Leader Nadav Sella, Solutions Sales Manager, Global Field Operations Injection molding (IM) the process of injecting plastic material into a mold cavity where it cools

More information

RHINO TO STL BEST PRACTICES

RHINO TO STL BEST PRACTICES WHITE PAPER RHINO TO STL BEST PRACTICES AUTHOR VERONICA DE LA ROSA RHINO TO STL BEST PRACTICES INTRODUCTION In order to get the best quality 3D prints from RHINO CAD models it is important to be familiar

More information

New Advances in Rapid Prototyping using Inkjet-based 3D Printing

New Advances in Rapid Prototyping using Inkjet-based 3D Printing New Advances in Rapid Prototyping using Inkjet-based 3D Printing April 2011 Objet Geometries Ltd. DISCLAIMER: Objet Geometries Ltd. ("Objet") does not guarantee the final release and availability of materials,

More information

Whether plastic, rubber, wood, metal or ceramic,

Whether plastic, rubber, wood, metal or ceramic, Material Guide A practical overview on 3D printing materials Whether plastic, rubber, wood, metal or ceramic, 3D printers can process a wide range of materials. In the following is a brief overview of

More information

Rapid prototyping. CAD / lecture. October 5, 2010. TO&I Vermelding onderdeel organisatie

Rapid prototyping. CAD / lecture. October 5, 2010. TO&I Vermelding onderdeel organisatie 1 Rapid prototyping is: Rapid prototyping is an additive (layered) digital fabrication technology Layers of material are added forming the final 3d physical model The digital data of the virtual 3d model

More information

BENEFITS OF 3D PRINTING VACUUM FORM MOLDS

BENEFITS OF 3D PRINTING VACUUM FORM MOLDS WHITE PAPER BENEFITS OF 3D PRINTING VACUUM FORM MOLDS AUTHORS COLE HARTMAN (MECHANICAL ENGINEER) & VERONICA DE LA ROSA (INDUSTRIAL DESIGNER) FATHOM is driven by advanced technologies. We leverage our expertise

More information

Use of 3D Printers in Proton Therapy

Use of 3D Printers in Proton Therapy Use of 3D Printers in Proton Therapy Nicholas Remmes, PhD Mayo Clinic, Rochester, MN Department of Radiation Oncology Remmes.Nicholas@mayo.edu 2015 MFMER slide-1 Disclosures/Confessions My 3D Printing

More information

How To Use 3D Printing For Business

How To Use 3D Printing For Business FIVE BEST PRACTICES: HOW INNOVATIVE UNIVERSITIES ARE INCORPORATING 3D PRINTING INTO THE CLASSROOM By Stratasys, Ltd 3D printing has recently seen a surge in popularity in universities and colleges across

More information

MEDICAL TECHNOLOGY IN IMPRESSIVE 3D

MEDICAL TECHNOLOGY IN IMPRESSIVE 3D MEDICAL TECHNOLOGY IN IMPRESSIVE 3D ABOUT 3D MEDICAL PRINT As a master dental technician with my own dental lab, I have always been looking for further education and innovative techniques in the medical

More information

Tutorial: Rapid Prototyping Technologies

Tutorial: Rapid Prototyping Technologies 1. Introduction Tutorial: Rapid Prototyping Technologies Rapid prototyping (RP) is a new manufacturing technique that allows for fast fabrication of computer models designed with three-dimension (3D) computer

More information

Fused Deposition Modeling: A Technology Evaluation

Fused Deposition Modeling: A Technology Evaluation Fused Deposition Modeling: A Technology Evaluation Todd Grimm T. A. Grimm & Associates, Inc. Selecting the best rapid prototyping process can be challenging. Without hands-on experience, uncovering both

More information

Choosing optimal rapid manufacturing process for thin-walled products using expert algorithm

Choosing optimal rapid manufacturing process for thin-walled products using expert algorithm Choosing optimal rapid manufacturing process for thin-walled products using expert algorithm Filip Górski, Wiesław Kuczko, Radosław Wichniarek, Adam Dudziak, Maciej Kowalski, Przemysław Zawadzki Poznan

More information

How To Build A 3D Model From Scratch

How To Build A 3D Model From Scratch SERVICES AND CAPABILITIES 1. Rapid prototyping What is rapid prototyping? Rapid prototyping (RP) or more recently Free Form Fabrication refers to the fabrication of a physical, three-dimensional part of

More information

DEVELOPMENT. Shorter time to market More product variants Increasing design complexity. Rapid. Prototyping PRODUCTION

DEVELOPMENT. Shorter time to market More product variants Increasing design complexity. Rapid. Prototyping PRODUCTION EOSINT P EOSINT P Plastic laser-sintering for direct manufacture of styling models, functional prototypes, patterns for plaster, investment and vacuum casting, end products and spare parts Laser-sintering

More information

Process capability study of polyjet printing for plastic components

Process capability study of polyjet printing for plastic components Journal of Mechanical Science and Technology 25 (4) (2011) 1011~1015 www.springerlink.com/content/1738-494x DOI 10.1007/s12206-011-0203-8 Process capability study of polyjet printing for plastic components

More information

COLORJET PRINTERS. Brilliant full-color parts with ProJet CJP 3D printers

COLORJET PRINTERS. Brilliant full-color parts with ProJet CJP 3D printers COLORJET PRINTERS Brilliant full-color parts with ProJet CJP 3D printers Make Your Designs Stand Out IMPROVE COMMUNICATION Communicate the look, feel and style of product designs with high-resolution,

More information

Advanced Manufacturing Choices

Advanced Manufacturing Choices Advanced Manufacturing Choices MAE 195-MAE 156 Spring 2009, Dr. Marc Madou Class 8: Rapid Prototyping By Dr. Miodrag Micic, mmicic@mpbio.com Two Ways for Fabrication: Substractive manufacturing Additive

More information

TUTOR NOTES. How to use this pack. Rapid prototyping in schools. Definition

TUTOR NOTES. How to use this pack. Rapid prototyping in schools. Definition TUTOR NOTES How to use this pack This pack is aimed at students studying for both Intermediate 2 and Higher Product Design. Students of other subjects might find it useful, and a Curriculum Map has been

More information

Zebra Card Printers Supplies List P330i/P430i with UHF Gen 2 RFID Encoder

Zebra Card Printers Supplies List P330i/P430i with UHF Gen 2 RFID Encoder Zebra Card Printers Supplies List P330i/P430i with UHF Gen 2 RFID Encoder Genuine Zebra Supplies Your choice of card printer supplies is critical - the quality of cards, ribbons and other items affects

More information

Stereolithography Material Properties

Stereolithography Material Properties Details Stereolithography Standard lead time: Standard accuracy: Surface finish: Maximum part dimensions: Capacity: Materials: From 2 days, depending on the size of the parts and the number of components.

More information

Redeye On Demand. Direct Digital Manufacturing

Redeye On Demand. Direct Digital Manufacturing Redeye On Demand Direct Digital Manufacturing Redeye on Demand Jeff Hanson Manager, Business Development Business Unit of Stratasys Inc Global Business with Digital Production facilities in North America,

More information

Tech Transfer to Start-up and Manufacturing - Fabrication. Chris Moody

Tech Transfer to Start-up and Manufacturing - Fabrication. Chris Moody Tech Transfer to Start-up and Manufacturing - Fabrication Chris Moody Fabrication Incubators Business incubators can be just office space with business services and advice or they can provide early manufacturing

More information

Acuity LED 1600 UV inkjet printer PRODUCT BROCHURE. Large format hybrid printer driven by Fujifilm technology, designed for creativity

Acuity LED 1600 UV inkjet printer PRODUCT BROCHURE. Large format hybrid printer driven by Fujifilm technology, designed for creativity Acuity LED 1600 UV inkjet printer PRODUT ROHURE Large format hybrid printer driven by Fujifilm technology, designed for creativity High performance Fujifilm LED UV LED UV has the capability to be a leading

More information

ZBuilder Ultra. Delivers the capabilities of a highend rapid prototyping system at a fraction of the cost. 2010 Z Corporation 2

ZBuilder Ultra. Delivers the capabilities of a highend rapid prototyping system at a fraction of the cost. 2010 Z Corporation 2 2010 Z Corporation ZBuilder Ultra Accurate, High-Resolution Plastic Prototypes Delivers the capabilities of a highend rapid prototyping system at a fraction of the cost 2010 Z Corporation 2 ZBuilder Ultra

More information

Application of Rapid Prototyping Technology to Earmold Production

Application of Rapid Prototyping Technology to Earmold Production Fourth LACCEI International Latin American and Caribbean Conference for Engineering and Technology (LACCET 2006) Breaking Frontiers and Barriers in Engineering: Education, Research and Practice 21-23 Jun

More information

3D-Printing and Stereolithography powerful manufacturing tools for textured or high-precision 3D city models

3D-Printing and Stereolithography powerful manufacturing tools for textured or high-precision 3D city models 3D-Printing and Stereolithography powerful manufacturing tools for textured or high-precision 3D city models Carsten Tille & Hermann Seitz caesar, Bonn (Germany) Rapid Prototyping Layer-by-layer fabrication

More information

Simplify your palette

Simplify your palette Simplify your palette ou can create most any spectrum color with a simple six color palette. And, an infinity of tones and shades you ll make by mixing grays and black with your colors... plus color tints

More information

The Prototyping Challenges with Micro Molding: A Comparative Study of Prototyping Methods for Micro Molding Applications

The Prototyping Challenges with Micro Molding: A Comparative Study of Prototyping Methods for Micro Molding Applications I. The Premise A lot has changed in the last 20+ years. Just two short decades ago our top speed personal computer processors were clocked at 386 MHz, hard drive space and RAM memory were still measured

More information

COMPARISON OF POLYJET PRINTING AND SILICON MOULDING AS RAPID PLASTIC MOULDING SOLUTIONS. R. Singh

COMPARISON OF POLYJET PRINTING AND SILICON MOULDING AS RAPID PLASTIC MOULDING SOLUTIONS. R. Singh International Journal of Automotive and Mechanical Engineering (IJAME) ISSN: 2229-8649 (Print); ISSN: 2180-1606 (Online); Volume 6, pp. 777-784, July-December 2012 Universiti Malaysia Pahang DOI: http://dx.doi.org/10.15282/ijame.6.2012.9.0063

More information

1/2 GLOBO 40 design SLIDE Studio

1/2 GLOBO 40 design SLIDE Studio 1/2 GLOBO 40 design SLIDE Studio Dimensioni Ø 40 h 20 cm Peso: 1,6 Kg Imballaggio: 41 x 41 x 24 cm Volume imballaggio: 0,04 m 3 Dimensions: Ø 40 h 20 cm Poids: 1,6 Kg Emballage: 41 x 41 x 24 cm Volume

More information

3 D Printing Threat or Opportunity? 13:45 p.m./29 April 2014

3 D Printing Threat or Opportunity? 13:45 p.m./29 April 2014 3 D Printing Threat or Opportunity? 13:45 p.m./29 April 2014 Additive Manufacturing Printing...Evolutionary Revolutionary Additive Sensors and Micro Flex Circuits 3 D Printing Prototypes and Production

More information

Ningbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes,

Ningbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes, Ningbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes, STEREOLITHOGRAPHY (SLA) Selective Laser Sintering (SLS) RTV MOLDING AND CAST URETHANE PROTOTYPES Tel : +86 574

More information

Profiles On Display CERTIFIED ISO 9001:2000. Call Toll Free 1.800 279.0991 Canada 800.361.4774 Montreal 514.325.9840 www.plastifab.

Profiles On Display CERTIFIED ISO 9001:2000. Call Toll Free 1.800 279.0991 Canada 800.361.4774 Montreal 514.325.9840 www.plastifab. From design to delivery Profiles On Display CERTIFIED ISO 9001:2000 Profiles On Display I n d u s t r i e s When Plastifab Industries and the former World Plastics combined their capabilities under one

More information

ACUITY Select series PRODUCT BROCHURE. Outstanding quality UV inkjet flatbed printers for PoP and customized for creative printing

ACUITY Select series PRODUCT BROCHURE. Outstanding quality UV inkjet flatbed printers for PoP and customized for creative printing ACUITY Select series PRODUCT BROCHURE Outstanding quality UV inkjet printers for PoP and customized for creative printing ACUITY SELECT The all-in-one mid-range... Benchmark Fujifilm Uvijet UV inks Color

More information

FDM Material Properties

FDM Material Properties Details FDM Standard lead time: Layer thickness: Standard accuracy: Surface finish: Maximum part dimensions: Capacity: Materials: 4-5 days 0.25 mm (for ABS, ABSi) 0.18 0.25 mm (for ABS-M30, ABS-M30i, PC,

More information

Low Pressure Molding Solutions

Low Pressure Molding Solutions Low Pressure Molding Solutions PROCESS TRADITIONAL POTTING PROCESS FLOW MOLD CASE PALLETIZE INSERT ELECTRONICS PRE-HEAT ENCAPSULATE SETTLING OR VACUUM CURE TEST LOW PRESSURE PROCESS FLOW INSERT ELECTRONICS

More information

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers

More information

Rapid Prototyping. Training Objective

Rapid Prototyping. Training Objective Training Objective After watching the program and reviewing this printed material, the viewer will understand the principles and practical applications of Rapid Prototyping. Basic concepts are explained

More information

Adhesives. Sticking to what we know best! Bonding and cleaning Window and door construction PVC, aluminium and wood. 33/08 made by Weiss

Adhesives. Sticking to what we know best! Bonding and cleaning Window and door construction PVC, aluminium and wood. 33/08 made by Weiss Adhesives Bonding and cleaning Window and door PVC, aluminium and wood Sticking to what we know best! 33/08 made by Weiss Window & door Our company The expert for adhesives for window and door As one of

More information

3M Scotch-Weld EPX Two-component structural adhesives and applicator guns

3M Scotch-Weld EPX Two-component structural adhesives and applicator guns M Scotch-Weld EPX Two-component structural adhesives and applicator guns Innovation What is a structural adhesive? M s high-strength structural adhesives are fundamentally load-bearing formulations. Bond

More information

Choosing the Right Rapid Prototype Source for Your Product Development Program. Phillips Plastics Corporation November 2009

Choosing the Right Rapid Prototype Source for Your Product Development Program. Phillips Plastics Corporation November 2009 Choosing the Right Rapid Prototype Source for Your Product Development Program Phillips Plastics Corporation November 2009 Introduction Being able to create prototype injection molded components and assemblies

More information

Labels. Fuji Xerox Document Supplies Catalogue 2010. Contents. Colotech labels 3. Copier/laser and inkjet printer labels 4.

Labels. Fuji Xerox Document Supplies Catalogue 2010. Contents. Colotech labels 3. Copier/laser and inkjet printer labels 4. Fuji Xerox Document Supplies Catalogue 2010 Contents Colotech labels 3 Copier/laser and inkjet printer labels 4 Clear labels 4 High speed labels 5 Custom labels 5 Software Series labels 6 Laser business

More information

N&H Technology GmbH. Silicone Rubber Keypad. Single Source Supply. Design Guide - Short Version. Engineering in Germany - Production in East Asia

N&H Technology GmbH. Silicone Rubber Keypad. Single Source Supply. Design Guide - Short Version. Engineering in Germany - Production in East Asia N&H Technology GmbH Import & Export of Industrial Products Technical Support and Engineering Business Consulting and Representation Silicone Rubber Keypad Design Guide - Short Version Single Source Supply

More information

Communicate: In Print

Communicate: In Print Communicate: In Print A simple guide Work areas Communicate: In Print has two different modes in which to edit your documents: Create and Adjust modes. These are easily interchangeable and the toolbars

More information

STORAGE DESIGN LIMITED TEL: 01446 772614 info@storage-design.co.uk See our available brochures www.storage-design.co.uk

STORAGE DESIGN LIMITED TEL: 01446 772614 info@storage-design.co.uk See our available brochures www.storage-design.co.uk Handling small parts? We make it easy Do you want to know more? STORAGE DESIGN LIMITED TEL: 01446 772614 info@storage-design.co.uk See our available brochures www.storage-design.co.uk on page 55»» System

More information

Overview. Creation of 3D printed phantoms for clinical radiation therapy 7/7/2015. Eric Ehler, PhD Assistant Professor University of Minnesota

Overview. Creation of 3D printed phantoms for clinical radiation therapy 7/7/2015. Eric Ehler, PhD Assistant Professor University of Minnesota Creation of 3D printed phantoms for clinical radiation therapy Eric Ehler, PhD Assistant Professor University of Minnesota ehler 046@umn.edu Overview Background of 3D Printing Practical Information Current

More information

SANIC SEDIMENT CARTRIDGES

SANIC SEDIMENT CARTRIDGES FILTER RTRIDGES WITH NTIMIROIL TEHNOLOGY SNI SEDIMENT RTRIDGES Range of sediment filter cartridges with antimicrobial product protection provided by a silver based antimicrobial agent included in the plastic

More information

How To Make An Led Lamphead

How To Make An Led Lamphead LED Design Guide 2 Henkel LED Design Guide Henkel LED Design Guide 3 Pages Pages 4-5 8-9 Roadway and Parking Lot Lighting Consumer / Residential Lighting Pages Pages 6-7 Industrial and Commercial Lighting

More information

Choosing the Right Rapid Prototyping Source for Your Product Development Program. Phillips Plastics Corporation November 2009

Choosing the Right Rapid Prototyping Source for Your Product Development Program. Phillips Plastics Corporation November 2009 Choosing the Right Rapid Prototyping Source for Your Product Development Program Phillips Plastics Corporation November 2009 Successful prototyping begins with mechanical design that will operate properly

More information

to realize innovative electronic products 2 June 13, 2013 Jan Eite Bullema 3D Printing to realize innovative electronic products

to realize innovative electronic products 2 June 13, 2013 Jan Eite Bullema 3D Printing to realize innovative electronic products Overview of 2 What is? Methods / Materials / Current Products Rapid Prototyping evolves to Additive Manufacturing in Electronics Manufacturing Recent developments in 3D printing at TNO Conclusions / jan_eite.bullema@tno.nl

More information

DESIGN OF MANUFACTURING SYSTEMS BY RAPID PROTOTYPING TECHNOLOGY APPLICATION

DESIGN OF MANUFACTURING SYSTEMS BY RAPID PROTOTYPING TECHNOLOGY APPLICATION Annals of the University of Petroşani, Mechanical Engineering, 14 (2012), 104-111 104 DESIGN OF MANUFACTURING SYSTEMS BY RAPID PROTOTYPING TECHNOLOGY APPLICATION JOZEF NOVAK-MARCINCIN 1 Abstract: Rapid

More information

FDM for Robotic End of Arm Tooling

FDM for Robotic End of Arm Tooling STRATASYS.COM OVERVIEW Robots are used to perform tasks such as sorting, transporting, palletizing, inspecting and machining. A robot s end of arm tool (EOAT), also called an end-effector, is selected

More information

Prototyping Process Choosing the best process for your project

Prototyping Process Choosing the best process for your project Prototyping Process Choosing the best process for your project Proto Labs, Inc. 5540 Pioneer Creek Dr. Maple Plain, MN 55359 P: (763) 479 3680 F: (763) 479 2679 www.protolabs.com 2009 Proto Labs. All rights

More information

SCREEN PRINTING INSTRUCTIONS

SCREEN PRINTING INSTRUCTIONS SCREEN PRINTING INSTRUCTIONS For Photo-Imageable Solder Masks and Idents Type 5600 Two Part Solder Masks and Idents Mega Electronics Ltd., Mega House, Grip Industrial Estate, Linton, Cambridge, ENGLAND

More information

VULCASCOT RUBBER CABLE PROTECTOR SYSTEMS Technical Data Sheet

VULCASCOT RUBBER CABLE PROTECTOR SYSTEMS Technical Data Sheet VULCASCOT RUBBER CABLE PROTECTOR SYSTEMS Technical Data Sheet Application: To cover and protect all types of cables found in offices, shops, laboratories, factories exhibition halls, warehouses and anywhere

More information

Pad printing accessories

Pad printing accessories Pad printing accessories Accessories for inks & ink cups Screened films & plastic plate manufacturing Cleaning Miscellaneous Inhalt Summary Page Adhesive spray KIWO FIX 12 All-purpose gloves 9 All-purpose

More information

Efficient Rapid Prototyping Mechanism Using Vacuum Casting (VC) Process

Efficient Rapid Prototyping Mechanism Using Vacuum Casting (VC) Process Efficient Rapid Prototyping Mechanism Using Vacuum Casting (VC) Process Deepika Jijotiya 1, Dr. P. L. Verma 2, Prof. Sanjay jain 3, Dr. L.Bajpai 4, Prof. A.Manoria 5 Department of Mechanical, Samrat Ashok

More information

HS-Alu-Premium. Curing chambers for the concrete industry in an innovative aluminium version

HS-Alu-Premium. Curing chambers for the concrete industry in an innovative aluminium version ANLAGENTECHNIK HS-Alu-Premium Curing chambers for the concrete industry in an innovative aluminium version + resistant to corrosion + low weight + simple assembly due to snap-in connections and building

More information

PLASTIC CONTAINERS CONTAINER HOLDING TROLLEYS CONTAINER HOLDING CABINETS PLASTIC DRAWER UNITS DRAWER UNIT HOLDER SHELVES FOOD CONTAINERS

PLASTIC CONTAINERS CONTAINER HOLDING TROLLEYS CONTAINER HOLDING CABINETS PLASTIC DRAWER UNITS DRAWER UNIT HOLDER SHELVES FOOD CONTAINERS CONTAINER HOLDING TROLLEYS CONTAINER HOLDING CABINETS PLASTIC DRAWER UNITS DRAWER UNIT HOLDER SHELVES FOOD CONTAINERS INDUSTRIAL CONTAINERS 64 CONTAINER HOLDING TROLLEYS for the coloured containers always

More information

THE BASICS OF COLOUR THEORY

THE BASICS OF COLOUR THEORY HUE: VALUE: THE BASICS OF COLOUR THEORY Hue is another word for colour, such as blue, red, yellow-green Distinguishes between the lightness (tint) and darkness (shade) of Colours. (TONE) CHROMA: The vibrancy

More information

RAPID PROTOTYPING. Principles and Applications. RAFIQ NOORANI, Ph.D. Professor of Mechanical Engineering Loyola Marymount University Los Angeles, CA

RAPID PROTOTYPING. Principles and Applications. RAFIQ NOORANI, Ph.D. Professor of Mechanical Engineering Loyola Marymount University Los Angeles, CA RAPID PROTOTYPING Principles and Applications RAFIQ NOORANI, Ph.D. Professor of Mechanical Engineering Loyola Marymount University Los Angeles, CA WILEY JOHN WILEY & SONS, INC. CONTENTS Preface Acknowledgments

More information

GLOBO 30 design SLIDE Studio

GLOBO 30 design SLIDE Studio DIMENSIONS (cm) www.slidedesign.it GLOBO 30 design SLIDE Studio / tavolo Anno di produzione: 1999 Dimensioni: Ø 30 cm Peso: 1,2 Kg Imballaggio: 31 x 31 x 31 cm Volume imballaggio: 0,03 m 3 / de table Année

More information

Basic controls of Rhinoceros 3D software

Basic controls of Rhinoceros 3D software lecture 2 Basic controls of Rhinoceros 3D software After the start Rhinoceros 3D software shows basic working area compound by four viewports (show model in other positions), popup menu over, palette menu

More information

An Evaluation of Some Low-cost Rapid Prototyping Systems for Educational Use

An Evaluation of Some Low-cost Rapid Prototyping Systems for Educational Use An Evaluation of Some Low-cost Rapid Prototyping Systems for al Use Wayne Helmer, Damon Mobbs Arkansas Tech University, Arkansas Tech University, Abstract Rapid Prototyping (RP) technology and methods

More information

How the uprint Rapidprotyping Machine Works

How the uprint Rapidprotyping Machine Works The University of New Haven Tagliatela College of Engineering Industrial and System Engineering Laboratory, Buckman B225 How the uprint Rapidprotyping Machine Works Prepared By: Carolina White, MS Industrial

More information

Projection surfaces. Matt white - black back

Projection surfaces. Matt white - black back Matt white - black back 1.2 0,42 mm M1 The Matt White screen fabric represents the top in terms of projection surface quality, guaranteeing perfect planarity, for optimal image reproduction, and excellent

More information

At the core of this relationship there are the three primary pigment colours RED, YELLOW and BLUE, which cannot be mixed from other colour elements.

At the core of this relationship there are the three primary pigment colours RED, YELLOW and BLUE, which cannot be mixed from other colour elements. The Colour Wheel The colour wheel is designed so that virtually any colours you pick from it will look good together. Over the years, many variations of the basic design have been made, but the most common

More information

ID@GT prepared by Gabe Landes for T. Purdy 2009

ID@GT prepared by Gabe Landes for T. Purdy 2009 Rapid prototyping is the automatic construction of physical objects using solid freeform fabrication. The first techniques for rapid prototyping became available in the late 1980s and were used to produce

More information

Q1-2014 Financial Results Conference Call

Q1-2014 Financial Results Conference Call May XX 9th March 2014 2013 Q1-2014 Financial Results Conference Call 2 Speakers Live Dial-in Information Replay Dial-in Information Q4-2013 Conference and webcast details David Reis Erez Simha CEO CFO

More information

Allison Rae Paramount Industries Rhode Island School of Design ID 87. Prototyping Overview

Allison Rae Paramount Industries Rhode Island School of Design ID 87. Prototyping Overview Allison Rae Paramount Industries Rhode Island School of Design ID 87 Prototyping Overview Prototyping for Mechanical Parts Paramount Industries Started as prototyping vendor, then added: Industrial Design

More information

The Anatomy of a Label

The Anatomy of a Label The Anatomy of a Label Three key elements make up a label: face stock, release liner, and adhesive. Face Stock: Face stock is the material of the label that carries the imprint. The print can be applied

More information

Chapter 5 POWDER-BASED RAPID PROTOTYPING SYSTEMS

Chapter 5 POWDER-BASED RAPID PROTOTYPING SYSTEMS Chapter 5 POWDER-BASED RAPID PROTOTYPING SYSTEMS 5.1 3D SYSTEMS SELECTIVE LASER SINTERING (SLS) 5.1.1 Company 3D Systems Corporation was founded by Charles W. Hull and Raymond S. Freed in 1986. The founding

More information

SPILL CONTAINMENT PRODUCTS

SPILL CONTAINMENT PRODUCTS SPILL CONTAINMENT PRODUCTS CHEMISAFE spill containment products help you comply with environmental regulations. Keep your staff safe from accidental slips, protect your workfloor and limit high clean-up

More information

Affordable A3 colour for your busy workgroup

Affordable A3 colour for your busy workgroup colour printer Affordable A3 colour for your busy workgroup Colour Touch screen Solutions Model A3 Up to 31 ppm The colour printer delivers outstanding A3 colour printing, easy-to-use features and productivity

More information

Amphenol Sincere. Electronic Integration & Flexible Printed Circuits. Aerospace. Health Care. Heavy Equipment HEV. Industrial

Amphenol Sincere. Electronic Integration & Flexible Printed Circuits. Aerospace. Health Care. Heavy Equipment HEV. Industrial Amphenol Sincere Health Care Aerospace Heavy Equipment HEV Industrial Electronic Integration & Flexible Printed Circuits About Amphenol The second largest manufacturers of interconnect products 87 worldwide

More information

1 HP Deskjet 3840 series printer

1 HP Deskjet 3840 series printer 1 HP Deskjet 3840 series printer To find an answer to a question, select one of the following topics: Notices Special features Getting started Connecting to the printer Printing photos Printing other documents

More information

THE ALL NEW GUEST MODULE GM2X6 TALK SHOW CONTROL SURFACE. JK Audio

THE ALL NEW GUEST MODULE GM2X6 TALK SHOW CONTROL SURFACE. JK Audio THE ALL NEW GUEST MODULE GM2X6 TALK SHOW CONTROL SURFACE JK Audio LET S TALK... The single most important function of a talk show system is getting excellent caller audio on the air. While there are many

More information

STANDARD MICRO-D CONNECTORS

STANDARD MICRO-D CONNECTORS STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector

More information

3D Printing, Additive Manufacturing, and Solid Freeform Fabrication: The Technologies of the Past, Present

3D Printing, Additive Manufacturing, and Solid Freeform Fabrication: The Technologies of the Past, Present and Future Joseph J Beaman NSF Additive Manufacturing Workshop 3D Printing, Additive Manufacturing, and Solid Freeform Fabrication: The Technologies of the Past, Present The University of Texas Solid

More information

Conditions for Designing Mail Items

Conditions for Designing Mail Items Conditions for Designing Mail Items What you have to take into account? You can browse through the conditions by clicking on the underlined links. Postzegel niet nodig Contents Introduction 2 Size Categories

More information

TROLLEY LOCKS FOR TROLLEY MANAGEMENT

TROLLEY LOCKS FOR TROLLEY MANAGEMENT TROLLEY LOCKS FOR TROLLEY MANAGEMENT RONIS TROLLEY LOCK FEATURES AND BENEFITS > Strength A robust metal housing. An internal metal mechanism providing long life. A strong galvanized steel key and chain.

More information

10 Reasons Paper-based 3D Printing is Better

10 Reasons Paper-based 3D Printing is Better 10 Reasons Paper-based 3D Printing is Better 1 10 Reasons Paper-based 3D Printing is Better 10 Reasons Paper-based 3D Printing is Better 1 Introduction 3D printers use a wide range of materials, including

More information

Conditions for Designing Mail Items

Conditions for Designing Mail Items onditions for Designing Mail Items What you have to take into account? You can browse through this conditions by clicking on the underlined links. Postzegel niet nodig ontents Introduction 2 Size ategories

More information

ALI BABA PIANTANA (H165) design SLIDE Studio

ALI BABA PIANTANA (H165) design SLIDE Studio ALI BABA PIANTANA (H165) design SLIDE Studio Dimensioni: Ø 43 h 165 cm Peso: 9,5 Kg Volume imballaggio: 0,268 m 3 Dimensions: Ø 43 h 165 cm Poids: 9,5 Kg Volume emballage: 0,268 m 3 Dimensions: Ø 43 h

More information

The RTC logo. Color Guides PANTONE 284 C PANTONE 287 C. Graphic Standards

The RTC logo. Color Guides PANTONE 284 C PANTONE 287 C. Graphic Standards The RTC logo The RTC logo is the identifying mark of the Regional Transportation Commission. It should appear on all vehicles, communications, marketing, signage, and uniforms as dictated by corporate

More information

FINISHING CAPABILITIES

FINISHING CAPABILITIES PRINT CAPABILITIES With remarkable equipment, technology and a superior team, we can produce up to 17,000sq. ft. of display graphics per hour. Our quality control and full service customer satisfaction

More information

Andreas Gebhardt. Rapid Prototyping HANSER. Hanser Publishers, Munich Hanser Gardner Publications, Inc., Cincinnati

Andreas Gebhardt. Rapid Prototyping HANSER. Hanser Publishers, Munich Hanser Gardner Publications, Inc., Cincinnati Andreas Gebhardt Rapid Prototyping HANSER Hanser Publishers, Munich Hanser Gardner Publications, Inc., Cincinnati Contents 1 Product Development - Product Formation - Rapid Product Development 1 1.1 New

More information

Chains. Product Catalogue. Bringing Good Things Ahead

Chains. Product Catalogue. Bringing Good Things Ahead Chains Product Catalogue Bringing Good Things Ahead Contents Welcome 3 Developement of plastic chains 4 FT70 5 RT114 6 RTF70 7 RTF114 8 FT54 9 KLDH50 10 Welcome to the world of Conveyor Solutions Fredriksons

More information

From rapid prototyping to additive manufacturing: history, trends and current research

From rapid prototyping to additive manufacturing: history, trends and current research From rapid prototyping to additive manufacturing: history, trends and current research Marco Leite marcoleite@tecnico.ulisboa.pt March 17, 2015 Outline History of rapid prototyping From RP to AM Principles

More information

Computer Animation: Art, Science and Criticism

Computer Animation: Art, Science and Criticism Computer Animation: Art, Science and Criticism Tom Ellman Harry Roseman Lecture 12 Ambient Light Emits two types of light: Directional light, coming from a single point Contributes to diffuse shading.

More information

THE PROFESSIONAL S ANSWER TO JUMP LEADS

THE PROFESSIONAL S ANSWER TO JUMP LEADS THE PROFESSIONAL S ANSWER TO JUMP LEADS THE SNAP-ON PORTABLE POWER 1700 FEATURES: DETACHABLE LEADS CUSTOM BUILT LEADS (Longer leads and motorcycle leads available) SIMPLE STRONG DESIGN EXTRA-TOUGH PLASTIC

More information

3 Single-Coated Foam Tapes

3 Single-Coated Foam Tapes 3 Single-Coated Foam Tapes Technical Data May, 2008 Product Description 3M Single-Coated Foam Tapes will adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel,

More information