Use & Care Manual. Electric Water Heaters. With Installation Instructions for the Installer. Single and Double Element Models, Gallon

Size: px
Start display at page:

Download "Use & Care Manual. Electric Water Heaters. With Installation Instructions for the Installer. Single and Double Element Models, 15 50 Gallon"

Transcription

1 Use & Care Manual With Installation Instructions for the Installer Electric Water Heaters Single and Double Element Models, Gallon The purpose of this manual is twofold: one, to provide the installer with the basic directions and recommendations for the proper installation and adjustment of the water heater; and two, for the owner operator, to explain the features, operation, safety precautions, maintenance and troubleshooting of the water heater. This manual also includes a parts list. It is imperative that all persons who are expected to install, operate or adjust this water heater read the instructions carefully so they may understand how to perform these operations. If you do not understand these instructions or any terms within it, seek professional advice. Any questions regarding the operation, maintenance, service or warranty of this water heater should be directed to the seller from whom it was purchased. If additional information is required, refer to the warranty. Do not destroy this manual. Please read carefully and keep in a safe place for future reference.!! Recognize this symbol as an indication of Important Safety Information! California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. AP17947 (09/15)

2 Safety Information Safety Precautions... 3, 4 FOR YOUR RECORDS Write the model, serial numbers, and installation details on the back cover of the manual. Installation Instructions Location... 5 Water Connections... 8 Electrical Connections Wiring Diagram This information is located on the rating plate (silver label) on the unit. Staple sales slip or cancelled check here. Proof of the original purchase date is needed to obtain service under the warranty. Operating Instructions Safety Controls Water Temperature...14 READ THIS MANUAL Inside you will find many helpful hints on how to use and maintain your water heater properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your water heater. You ll find many answers to common problems in the Before You Call For Service section. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all. Care and Cleaning Draining Maintenance Extended Shut-Down Troubleshooting Tips Before You Call For Service Customer Service Parts List Replacement Parts... 19, 20 Element Replacement Warranty How To Register If You Need Service...28 READ THE SAFETY INFORMATION Your safety and the safety of others are very important. There are many important safety messages in this manual and on your appliance. Always read and obey all safety messages.! This is the safety alert symbol. Recognize this symbol as an indication of Important Safety Information! This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word DANGER, WARNING, CAUTION or NOTICE. These words mean:! DANGER An imminently hazardous situation that will result in death or serious injury.! WARNING A potentially hazardous situation that could result in death or serious injury and/or damage to property.! CAUTION A potentially hazardous situation that may result in minor or moderate injury. Notice: Attention is called to observe a specified procedure or maintain a specific condition. 2

3 IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. DANGER! WATER TEMPERATURE SETTING Safety and energy conservation are factors to be considered when selecting the water temperature setting of water heater s thermostat. Water temperatures above 125 F (51 C) can cause severe burns or death from scalding. Be sure to read and follow the warnings outlined on the label pictured below. This label is also located on the water heater near the thermostat access panel.! DANGER HOT Time/Temperature Relationship in Scalds Temperature Time To Produce a Serious Burn 120 F (49 C) More than 5 minutes 125 F (51 C) 1½ to 2 minutes 130 F (54 C) About 30 seconds 135 F (57 C) About 10 seconds 140 F (60 C) Less than 5 seconds 145 F (63 C) Less than 3 seconds 150 F (66 C) About 1½ seconds 155 F (68 C) About 1 second Table courtesy of Shriners Burn Institute The chart shown above may be used as a guide in determining the proper water temperature for your home. BURN Water temperature over 125 F can cause severe burns instantly or death from scalds. Children, disabled and elderly are at highest risk of being scalded. See instruction manual before setting temperature at water heater. Feel water before bathing or showering. Temperature limiting valves are available, see manual. Notice: Mixing valves are recommended for reducing point of use water temperature by mixing hot and cold water in branch water lines. It is recommended that a mixing valve complying with the Standard for Temperature Actuated Mixing Valves for Hot Water Distribution Systems, ASSE 1017 be installed. See page 14 for more details and contact a licensed plumber or the local plumbing authority for further information.! DANGER: Households with small children, disabled, or elderly persons may require a 120 F (49 C) or lower thermostat setting to prevent contact with HOT water. The temperature of the water in the heater is regulated by the adjustable surface mounted thermostat(s) located behind the jacket access panel(s). Dual element heaters have two thermostats. To comply with safety regulations the thermostat(s) were set at 120 F before the water heater was shipped from the factory. Canadian models are set to 140 F (60 C). Reset button Thermostat dial pointer Thermostat protective cover The illustration at the left shows the temperature adjustment dial used for setting the water temperature. Refer to the Operating Instructions in this manual for detailed instructions in how to adjust the thermostat(s).! DANGER: Hotter water increases the potential for Hot Water SCALDS. 3

4 IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. WARNING! For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life. Be sure to read and understand the entire Use and Care Manual before attempting to install or operate this water heater. It may save you time and cost. Pay particular attention to the Safety Instructions. Failure to follow these warnings could result in serious bodily injury or death. Should you have problems understanding the instructions in this manual, or have any questions, STOP, and get help from a qualified service technician, or the local electric utility. FOR INSTALLATIONS IN THE STATE OF CALIFORNIA California Law requires that residential water heaters must be braced, anchored or strapped to resist falling or horizontal displacement due to earthquake motions. For residential water heaters up to 52 gallon capacity, a brochure with generic earthquake bracing instructions can be obtained from: Office of the State Architect, 1102 Q Street, Suite 5100, Sacramento, CA or you may call or ask a water heater dealer. However, applicable local codes shall govern installation. For residential water heaters of a capacity greater than 52 gallons, consult the local building jurisdiction for acceptable bracing procedures. SAFETY PRECAUTIONS Have the installer show you the location of the circuit breaker and how to shut it off if necessary. Turn off the circuit breaker if the water heater has been subjected to overheating, fire, flood, physical damage or if the ECO (Emergency Cut Off) on the thermostat fails to shut off. Read this manual entirely before installing or operating the water heater. Use this appliance only for its intended purpose as described in this Use and Care Manual. Be sure your appliance is properly installed in accordance with local codes and the provided installation instructions. DO NOT attempt to repair or replace any part of your water heater unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician. All replacement parts used on this product must be manufacturer authorized components. DO NOT turn on the electrical supply or operate this water heater unless it is completely full of water. READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY. SAVE THESE INSTRUCTIONS 4

5 Installing the water heater. Local Installation Regulations This water heater must be installed in accordance with these instructions, local codes, utility codes, utility company requirements or, in the absence of local codes, the latest edition of the National Electrical Code. It is available from some local libraries or can be purchased from the National Fire Protection Association, Batterymarch Park, Quincy, MA as booklet ANSI/NFPA 70. If the water heater is to be installed in a restaurant, or other location where NSF International listing is required, it must be weather sealed to the floor, a raised base, or on a shelf so that seepage cannot accumulate under it; or elevated to provide at least (6) inches of clearance from the floor. In order to meet NSF International requirements for Standard 5, the base of the water heater must be sealed to the floor to prevent seepage underneath. Apply a 3/8" bead of RTV Silicone completely around the floor edge of the base of the tank. The location chosen for the water heater must take into consideration the following: Location NOTICE: DO NOT use fittings on top of the unit as handles or lift points. Locate the water heater in a clean dry area as near as practical to the area of greatest heated water demand. Long un-insulated hot water lines can waste energy and water. Place the water heater in such a manner that the thermostat and element access panels can be removed to permit inspection and servicing such as removal of elements or checking controls. The water heater and water lines should be protected from freezing temperatures. DO NOT install the water heater in outdoor, unprotected areas or near any other appliances where high temperatures are present, such as wood burning stoves, boilers, or furnaces. High temperatures can warp or otherwise damage the nonmetallic construction of this water heater. Make certain the floor underneath the water heater is strong enough to sufficiently support the weight of the water heater once it is filled with water. Unit Capacity (Gallons) Unit Capacity (Imperial Gallons) Dimensions (Inches) Shipping Weight (lbs) Approximate Full Weight (lbs) Height 1 Diameter /8 21 5/ /2 23 1/ / /2 21 5/ /4 23 1/ S 47 1/4 28 1/ Height includes factory installed Temperature and Pressure Relief Valve. 5

6 Installing the water heater. Thermal Expansion Determine if a check valve exists in the inlet water line. Check with your local water utility. It may have been installed in the cold water line as a separate back flow preventer, or it may be part of a pressure reducing valve, water meter or water softener. A check valve located in the cold water inlet line can cause what is referred to as a closed water system. A cold water inlet line with no check valve or back flow prevention device is referred to as an open water system. As water is heated, it expands in volume and creates an increase in the pressure within the water system. This action is referred to as thermal expansion. In an open water system, expanding water which exceeds the capacity of the water heater flows back into the city main where the pressure is easily dissipated. A closed water system, however, prevents the expanding water from flowing back into the main supply line, and the result of thermal expansion can create a rapid and dangerous pressure increase in the water heater and system piping. This rapid pressure increase can quickly reach the safety setting of the relief valve, causing it to operate during each heating cycle. Thermal expansion, and the resulting rapid and repeated expansion and contraction of components in the water heater and piping system can cause premature failure of the relief valve, and possibly the heater itself. Replacing the relief valve will not correct the problem! The suggested method of controlling thermal expansion is to install an expansion tank in the cold water line between the water heater and the check valve (refer to the illustration on page 9). The expansion tank is designed with an air cushion built in that compresses as the system pressure increases, thereby relieving the over pressure condition and eliminating the repeated operation of the relief valve. Other methods of controlling thermal expansion are also available. Contact your installing contractor, water supplier or plumbing inspector for additional information regarding this subject. Inspect Water Heater Inspect the water heater for possible damage. Check the markings on the rating plate of the water heater to be certain the power supply corresponds to the water heater requirements. Vacuum Relief Valve NOTICE: Do NOT operate the unit without the vacuum relief valve for any reason. Doing so will void the manufacturer s warranty. The vacuum relief valve, which must be used when installing the water heater, is factory installed. The cold water inlet has a vacuum relief valve connected to it. Certain conditions in the field may produce a vacuum or negative pressure condition inside the water heater s tank. This negative pressure can cause the tank to fail. The vacuum relief valve provides a means to eliminate the negative pressure or vacuum by admitting air into the tank to equalize the pressure. It is not recommended to pull a vacuum on the unit. If a vacuum is pulled on the unit, refer to the "To Fill the Water Heater" section to ensure the unit is full of water before operating. 6

7 A new combination temperature and pressure relief valve, complying with the Standard for Relief Valves for Hot Water Supply Systems, ANSI Z21.22, is supplied and must be installed in the opening provided and marked for the purpose on the water heater. No valve of any type should be installed between the relief valve and the tank. Local codes shall govern the installation of relief valves.! WARNING: The pressure rating of the relief valve must not exceed 150 psi, (1034 kpa), the maximum working pressure of the water heater as marked on the rating plate. Temperature and Pressure Relief Valve The BTUH rating of the relief valve must not be less than the input rating of the water heater as indicated on the rating label located on the front of the heater (1 watt=3.412 btu/h). Connect the outlet of the relief valve to a suitable open drain so that the discharge water cannot contact live electrical parts or persons and to eliminate potential water damage. Piping used should be of a type approved for hot water distribution. The discharge line must be no smaller than the outlet of the valve and must pitch downward from the valve to allow complete drainage (by gravity) of the relief valve and discharge line. The end of the discharge line should not be threaded or concealed and should be protected from freezing. No valve of any type, restriction or reducer coupling should be installed in the discharge line. NOTICE: Auxiliary catch pan MUST conform to local codes. NOTICE: Water heater must be centered in drain pan. Drain Pan The water heater should not be located in an area where leakage of the tank or connections will result in damage to the area adjacent to it or to lower floors of the structure. Where such areas cannot be avoided, it is recommended that a suitable drain pan, adequately drained, be installed under the water heater. Under no circumstance will the manufacturer be held liable for any water damage in connection with this water heater. Drain pan kits are available from the store where the water heater was purchased, or any water heater distributor. B = Max 2 B A = Diameter of water heater plus 2 min. A To open drain, this line should be at least 3/4 ID and pitched for proper drainage. 7

8 Installing the water heater. NOTICE: DO NOT attempt to turn any fitting connected to the water heater union hex nuts that are tightened. NOTICE: The hex nut connections on the units use rubber seal rings to provide the water tight seal. DO NOT use pipe sealant on this joint. DO NOT torque the union hex nuts to over 35 ft-lbs when reinstalling the components. SOLDER WITH CARE!!! If sweat connections are used, DO NOT apply heat directly to any component directly connected to the water heater. Assemblies should be built to a minimum length of 12 before attaching to any connection on the water heater to avoid damaging the unit.! WARNING: Failure to follow the instructions provided in this manual may permanently damage the unit and void the manufacturer s warranty. Water Supply Connections Refer to the illustration on the next page for suggested typical installation. The installation of unions or flexible copper connectors is recommended on the hot and cold water connections so that the unit may be easily disconnected for servicing if necessary. The HOT and COLD water connections are clearly marked on the top of the unit. Install a shut-off valve in the cold water line near the unit. The hot water connection is provided with a ¾ or 1 connection depending on the size of the unit. A metal fitting should be used for the connection to the unit at this location. The hot water connection contains a plastic cap to contain a rubber seal ring that is used to form a water tight connection. Take care when removing the plastic cap so the rubber seal ring is not lost. Be sure the rubber seal ring is seated inside the union hex nut before making the final connection. DO NOT use pipe sealant on this joint. DO NOT torque the union hex nuts to over 35 ft-lbs when reinstalling the components. The cold water connection and the temperature and pressure relief valve are supplied with ¾ NPT connections. They may be temporarily disconnected from the unit to ease installation by loosening the union hex nuts connecting the fittings to the unit. The connection of these parts to the unit use rubber seal rings to form a water tight connection. Re-use the rubber seal rings that are provided with the unit when re-installing these components. Follow the instructions listed for the hot water connection to reconnect the union hex nuts. Rubber Seal Ring Minimum Dimension 3/4 Connection: Connection: Hex Union Nut The hot water connection fitting must have an inside diameter greater than the minimum shown in the picture above.! WARNING: DO NOT turn on the electrical supply or operate this water heater unless it is completely full of water.the tank must be full of water before heater is turned on. The water heater warranty does not cover damage or failure resulting from operation with an empty or partially empty tank. To Fill the Water Heater Make certain the drain valve on the water heater is completely closed. Open the shut-off valve in the cold water supply line. Open each hot water faucet slowly to allow the air to vent from the water heater and piping. A steady flow of water from the hot water faucet(s) indicates a full water heater. 8

9 Typical Installation Temperature & Pressure Relief Valve Seal Ring (Inside nut) Hex Union Nut (Relief Valve) Top of Water Heater Junction Box Hot Water Outlet Pre-solder 12" minimum stub pipes before installing to unit. Cold Inlet Shut Off Support the relief valve drain pipe using metal strapping or wire fastened to the structure overhead Heat Trap 6" Minimum Union (The addition of a union at this point will help in the replacement of the T & P Relief Valve should the need arise.) Thermal Expansion Tank (if required) See thermal expansion section on page 6. Drain Pipe -(3/4" minimum) No threads permitted on end of Drain Pipe. Drain Valve 6 Maximum distance from drain pipe to suitable open drain. Drain Pan 9

10 Installing the water heater. DO NOT turn on the electrical supply or operate this water heater unless it is completely full of water. Electrical Connections A separate branch circuit with copper conductors, over current protective device and suitable disconnecting means must be provided by a qualified electrician. All wiring must conform to local codes or latest edition of National Electrical Code ANSI/NFPA 70. Canadian models must conform to local codes or latest edition of Canadian Electrical Code. The water heater is completely wired to the junction box inside jacket at the top front of the water heater. An opening for 1/2 or 3/4 electrical fitting is provided for field wiring connections. The voltage requirements and wattage load for the water heater are specified on the rating plate on the front of the water heater. The branch circuit wiring should include either:! Metallic conduit or metallic sheathed cable approved for use as a grounding conductor and installed with fittings approved for the purpose. Non-metallic sheathed cable, metallic conduit or metallic sheathed cable not approved for use as a ground conductor shall include a separate conductor for grounding. It should be attached to the ground terminals of the water heater and the electrical distribution box. CAUTION: The presence of water in the piping and water heater does not provide sufficient conduction for a ground. Nonmetallic piping, dielectric unions, flexible connectors etc. can cause the water heater to be electrically isolated. Non - Metallic Sheathed Cable with separate grounding conductor. Main Fuse or Circuit Breaker Panel GREEN BLACK Grounding Conductor (Bare or Green) RED Wire Nut BLACK Wire Nut Top of Water Heater Junction Box RED 10

11 Single Phase Wiring Branch Circuit Sizing and Wire Size Guide Total Water Heater Wattage Recommended Over Current Protection Copper (fuse or circuit breaker amperage rating) Wire Size AWG Based on N.E.C. Table (75 C) 120V 240V 120V 240V 2, , , , ! DANGER: Elements should only be replaced with an element of the same power rating that was factory installed, and corresponds to the rating label on the unit. NOTICE: This guide recommends minimum branch circuit sizing and wire size based on National Electric Code. Refer to wiring diagrams in this manual for field wiring connections. Wiring Diagrams 240 Volt DOUBLE ELEMENT BRANCH CIRCUIT TO ELECTRICAL DISTRIBUTION PANEL BLACK L1 2 G * L RED JUNCTION BOX UPPER THERMOSTAT & HIGH TEMP. LIMIT (ECO) 1 4 BLACK L1 240 Volt SINGLE ELEMENT G * L2 RED BRANCH CIRCUIT TO ELECTRICAL DISTRIBUTION PANEL JUNCTION BOX BLACK H 120 Volt SINGLE ELEMENT G * BRANCH CIRCUIT TO ELECTRICAL DISTRIBUTION PANEL N JUNCTION BOX YELLOW 2 UPPER HEATING ELEMENT BLACK BLUE RED THERMOSTAT & HIGH TEMP. LIMIT (ECO) WHITE THERMOSTAT & HIGH TEMP. LIMIT (ECO) 1 LOWER THERMOSTAT YELLOW 2 BLUE HEATING ELEMENT YELLOW 2 HEATING ELEMENT YELLOW 2 LOWER HEATING ELEMENT 11

12 Installing the water heater.! WARNING: If local codes require external application of insulation blanket kits the manufacturer s instructions included with the kit must be carefully followed. Insulation Blankets Insulation blankets, available to the general public, for external use on electric water heaters are not necessary. The purpose of an insulation blanket is to reduce the standby heat loss encountered with storage tank heaters. This water heater meets or exceeds the National Appliance Energy Conservation Act standards with respect to insulation and standby loss requirements making an insulation blanket unnecessary. The manufacturer s warranty does not cover any damage or defect caused by installation, attachment or use of any type of energy saving or other unapproved devices (other than those authorized by the manufacturer) into, onto or in conjunction with the water heater. The use of unauthorized energy saving devices may shorten the life of the water heater and may endanger life and property.! CAUTION: If local codes require the application of an external insulation blanket to this water heater, pay careful attention to the following so as not to restrict the proper function and operation of the water heater: DO NOT cover the operating or warning labels attached to the water heater or attempt to relocate them on the exterior of insulation blanket. DO NOT apply insulation to the top of the water heater. This could interfere with the safe operation of the electrical junction box. DO NOT cover the jacket access panel(s) to the thermostat(s) and heating element(s), vacuum valve, or pressure and temperature relief valve. Inspect the insulation blanket frequently. The manufacturer disclaims any responsibility for such loss or injury resulting from the use of such unauthorized devices. Hot and Cold Pipe Insulation Installation Notice: Do not cover or block opening on vacuum valve Vacuum Valve Vacuum Valve Typical vertical piping arrangement For increased energy efficiency, some water heaters have been supplied with two 24 sections of pipe insulation. Typical horizontal piping arrangement Please install the insulation, according to the illustrations above, that best meets your requirements. 12

13 Installation Checklist A. Water Heater Location Close to area of heated water demand. Indoors and protected from freezing temperatures. Area free of flammable vapors. Provisions made to protect area from water damage. Sufficient room to service heater. B. Water Supply Water heater completely filled with water. Air purged from water heater and piping. Water connections tight and free of leaks. C. Relief Valve Temperature and Pressure Relief Valve properly installed and discharge line run to open drain. Discharge line protected from freezing. D. Wiring Power Supply voltage agrees with water heater rating plate. Branch circuit wire and fusing or circuit breaker of proper size. Electrical connections tight and unit properly grounded. 13

14 Operating the water heater. Safety Precautions Do turn off power to water heater if it has been subjected to over heating, fire, flood, physical damage. DO NOT turn on water heater unless it is filled with water. DO NOT turn on water heater if cold water supply shut-off valve is closed. If there is any difficulty in understanding or following the Operating Instructions or the Care and Cleaning section, it is recommended that a qualified person or serviceman perform the work. The unit must be completely filled with water before turning on the power. NOTICE: It is important that the fiberglass insulation is replaced to maintain water heater's performance. WARNING: If the water heater has been subjected to flood, fire, or physical damage, turn off power and water to the water heater. Do not operate the water heater again until it has been thoroughly checked by qualified service personnel. Safety Controls The water heater is equipped with a combination thermostat and temperature limiting control (ECO) that is located above the heating element in the upper control box. If for any reason the water temperature becomes excessively high, the temperature limiting control (ECO) breaks the power circuit to the heating element. Once the control opens, it must be reset manually. CAUTION: The cause of the high temperature condition must be investigated by qualified service technician and corrective action must be taken before placing the water heater in service again. To reset the temperature limiting control: Turn off the power to the water heater. Remove the jacket access panel(s) and insulation from the top control box. The thermostat protective cover should not be removed. Press the red RESET button. Replace the insulation and jacket access panel(s) before turning on the power to the water heater. 14! DANGER: There is a hot water scald potential if the thermostat is set too high. Households with small children, disabled, or elderly persons may require a 120 F (49 C) or lower thermostat setting to prevent contact with HOT water.! DANGER: The water heater will experience the highest water temperatures the first time the unit is operated as it is conditioned and the temperature stabilizes. Water Temperature Setting The temperature of the water in the water heater can be regulated by setting the temperature dial of the adjustable surface mounted thermostat(s) located behind the jacket access panel(s). Dual element heaters have two thermostats. Safety and energy conservation are factors to be considered when selecting the water temperature setting of the water heater s thermostat(s). The lower the temperature setting, the greater the savings in energy and operating costs. To comply with safety regulations the thermostat(s) are factory set at 120 F or less where local codes require. Canadian models are set to 140 F (60 C). These are the recommended starting points. Water temperatures above 125 F (51 C) can cause severe burns or death from scalding. Be sure to read and follow the warnings outlined in this manual and on the label on the water heater. This label is located on the water heater near the thermostat access panel. Mixing valves are recommended for reducing point of use water temperature by mixing hot and cold water in branch water lines. It is recommended that a mixing valve complying with the Standard for Temperature Actuated Mixing Valves for Hot Water Distribution Systems, ASSE 1017 be installed. See page 3 for more details and contact a licensed plumber or the local plumbing authority for further information. The chart on the next page may be used as a guide in determining the proper water temperature for your home.

15 E If adjustment is necessary To increase the water temperature, it is recommended to adjust the bottom thermostat only. To decrease water temperature, all thermostats on the unit need to be adjusted to the lower setting. Turn off the power to the water heater.! DANGER: Make certain power to the water heater is "OFF" before removing any jacket access panel for any reason. Failure to do so could result in property damage, bodily injury, or death. R E S E T R E S E T Reset button Remove the snap-in access panel cover. Insert finger into latch hole on the bottom of the cover and push up to release the latch. Pull forward and remove the cover and insulation. HIGH MED TURN OFF POWER BEFORE SERVICING LOW Top Thermostat or Single Thermostat Models Thermostat dial pointer Thermostat protective cover 150 F T 125 F TURN OFF P OWE R BEFORE SE RVICING Bottom Thermostat (Dual Thermostat Models) R 90 F Remove the (4) screws that secure the jacket access panel to the unit. Remove the jacket access panel and insulation exposing the thermostats. Use care when removing insulation pads. The thermostat protective cover should not be removed. Using a small screwdriver, set the thermostat dial pointer to the desired temperature by turning the screw. Do not pry or move the white plastic pointer. LOW 90 F (32 C) Water Temperature MED 120 F (49 C) Water Temperature HIGH 150 F (66 C) Water Temperature It is important that the fiberglass insulation is replaced to maintain water heater's performance and safety. Replace the rectangular insulation and thermostat access panel. Secure the panel to the unit using the (4) screws provided. Tighten the screws until only snug. Replace the access panel cover and insulation and snap in position. Turn on the power to the water heater. Time/Temperature Relationship in Scalds Temperature Time To Produce a Serious Burn 120 F (49 C) More than 5 minutes 125 F (51 C) 1 1 /2 to 2 minutes 130 F (54 C) About 30 seconds 135 F (57 C) About 10 seconds 140 F (60 C) Less than 5 seconds 145 F (63 C) Less than 3 seconds 150 F (66 C) About 1 1 /2 seconds 155 F (68 C) About 1 second Table courtesy of Shriners Burn Institute 15

16 Care and cleaning of the water heater. NOTICE: Additional instructions for draining the unit are located on the water heater. Please reference the "To Fill the Water Heater" section (see page 8) for instructions on how to refill the unit. Draining the Water Heater Shut off power to the water heater. Open a hot water faucet nearest the water heater. Run water until cold. Turn off the cold water supply to the water heater. Leave the hot water faucet open. Attach a garden hose to the drain valve on the bottom of the water heater and direct the hose to a drain. Lift open the handle on the relief valve, and leave open. (top center fitting on water heater) (some water may be released) Open the drain valve. Drain water heater completely. Close the drain valve. Close the relief valve. DANGER: Before manually operating the relief valve, make certain no one will be exposed to the danger of coming in contact with the hot water released by the valve. The water may be hot enough to create a scald hazard. The water should be released into a suitable drain to prevent injury or property damage. NOTICE: If the temperature and pressure relief valve on the hot water heater discharges periodically, this may be due to thermal expansion in a closed water system. Contact the water supplier or your plumbing contractor on how to correct this. Do not plug the relief valve outlet. Routine Preventative Maintenance Properly maintained, your water heater will provide years of dependable troublefree service. It is suggested that a routine preventive maintenance program be established and followed by the user. It is further recommended that a periodic inspection of the operating controls, heating elements and wiring should be made by service personnel qualified in electric appliance repair. Most electrical appliances, even when new, make some sound when in operation. If the hissing or singing sound level increases excessively, the electric heating element may require cleaning. Contact a qualified installer or plumbing contract to inspect. At least once a year, lift and release the lever handle on the temperature pressure relief valve, located near the top of the water heater, to make certain the valve operates freely. Allow several gallons to flush through the discharge line to an open drain. A water heater s tank can act as a settling basin for solids suspended in the water. It is therefore not uncommon for hard water deposits to accumulate in the bottom of the tank. It is suggested that a few quarts/ liters of water be drained from the water heater s tank every month to clean the tank of these deposits. Rapid closing of faucets or solenoid valves in automatic water using appliances can cause a banging noise heard in a water pipe. Strategically located risers in the water pipe system or water hammer arresting devices can be used to minimize the problem. Water conditions can cause mineral deposits to build up inside pipes. This buildup can reduce the effectiveness of the vacuum relief valve. The vacuum relief valve should be replaced every six years. Vacation and Extended Shut-Down If the water heater is to remain idle for an extended period of time, the power and water to the appliance should be turned off to conserve energy. If the water heater is installed in a location where it could freeze when not operational, all water must be drained from the unit and piping If the tank is full of water and freezes, the tank will break. See the "Draining the Water Heater" section for details on draining the unit. Freeze damage is not covered under the manufacturer's warranty. After a long shut-down period, the water heater s operation and controls should be checked by qualified service personnel. Make certain the water heater is completely filled again before placing it in operation. 16

17 Before You Call For Service Troubleshooting Tips Save time and money! Review the chart on this page first and you may not need to call for service. Problem Possible Causes What to Do Rumbling noise Relief valve producing popping noise or draining Not enough or no hot water Water conditions in your home caused a build up of scale or mineral deposits on the heating elements. Pressure build up caused by thermal expansion in a closed system. Water usage may have exceeded the capacity of the water heater. A fuse is blown or a circuit breaker tripped. Electric supply may be off. The thermostat may be set too low. Leaking or open hot water faucets. Electric service to your home may be interrupted. Improper wiring. Manual reset limit (ECO). Cold water inlet temperature may be colder during the winter months. Top element defective (no hot water) Bottom element defective (small quantity of hot water) Remove and clean the heating elements. Contact a qualified service technician. This is an unacceptable condition and must be corrected. Contact the water supplier or plumbing contractor on how to correct this. Do not plug the relief valve outlet. Wait for the water heater to recover after an abnormal demand. Replace fuse or reset circuit breaker. Make sure electric supply to water heater and disconnect switch, if used, are in the ON position. See the Temperature regulation of the water heater section of this manual. Make sure all faucets are closed. Contact the local electric utility. See the Installing the water heater section of this manual. See the Temperature regulation of the water heater section of this manual. This is normal. The colder inlet water takes longer to heat. Replace element. Replace element. Water is too hot The thermostat is set too high. See the Temperature regulation of the water heater section of this manual. Covers and / or insulation missing. Reinstall covers and insulation.! CAUTION: For your safety DO NOT attempt repair of electrical wiring, thermostats, heating elements or other safety devices. Refer repairs to qualified service personnel. 17

18 Replacement Parts. Key No. Description 1 Dip Tube 2 Grommet, Large Grommet, Small 3 Seal Ring, Large Seal Ring, Small 4 Vacuum Valve Assembly 5 Temperature and Pressure Relief Valve 6 Knock-Out Bracket 7 Screw, #8 x 3/4" 8 Junction Box Cover 9 Screw #8-16 x 5/8" 10 Upper Thermostat 11 Upper Protector 12 Screw, #10-16 x 5/8" 13 Thermostat Cavity Insulation 14 Upper Access Panel 15 Screw, #10-16 x 5/8" 16 Access Panel Cover Insulation 17 Access Panel Cover 18 Element Gasket 19 Upper Heating Element (Includes Key No. 18) 20 Lower Thermostat 21 Lower Protector 22 Lower Access Panel 23 Lower Heating Element (Includes Key No. 18) 24 Drain Valve 25 Reducer Bushing, 3/4" NPT x 1" NPT 26 5/16-18 Cap Screw 27 Lock Washer Element Wrench Pipe Wrap Energy Kit Use and Care Manual Not Illustrated 18

19 Replacement Parts gallon models

20 Replacement Parts gallon models

21 Element Replacement Instructions GALLON 15/20 GALLON 1. Turn off power to the unit.! DANGER: Make certain power to the water heater is OFF before removing any jacket access panel for any reason. Failure to do so could result in property damage, bodily injury, or death. 2. Open a hot water faucet and allow water to flow until the water is cold. 3. Empty the water out of the unit by following the instructions given in the Draining the Water Heater section (see page 16) of this manual. 4. Remove the snap-in access panel cover. Insert finger into latch hole on the bottom of the cover and push up to release the latch. Pull forward and remove the cover and insulation. 5. Remove the (4) screws that secure the jacket access panel to the unit. Remove the jacket access panel and insulation exposing the thermostat and element. Use care when removing the insulation pads. 6. Flip up the bottom of the plastic protector up to expose the head of the heating element. 7. Loosen the terminal screws on the element to disconnect the two wires and slightly bend them away from the element. 8. Using a wrench or socket to fit the 1 7/8 inch hex nut, remove the old element. For 15 and 20 gallon units use a 1/2 inch socket and remove the (4) bolts and lock washers on the element. NOTICE: An element wrench is available for purchase through your water heater distributor. NOTICE: Make sure the threads on the unit are clean. Brush debris off of threads with a toothbrush if needed. NOTICE: The elements are unique to the upper and lower port. Make certain the replacement element is correct for the port into which you are installing it. 9. On the new element make certain the element gasket is in place and not twisted. 10. Thread the new element into the tank and tighten with a wrench or socket to ft-lbs. For 15 and 20 gallon units install the element with the arrow on the head pointing UP using the same bolts and lock washers that were removed in step 8. NOTICE: DO NOT over tighten the element. DO NOT apply torque over 18 ft-lbs. 11. Reconnect the two wires to the element and tighten the terminal screws. 12. Reference the To Fill the Water Heater section of this manual for instructions on refilling the unit. 13. After the unit is completely filled with water and under pressure, verify the element is properly installed with no water leakage. 14. Lower the protector to cover the head of the heating element. 15. Replace the rectangular insulation and thermostat access panel. Secure the panel to the unit using the (4) screws provided. Tighten the screws until only snug. 16. Replace the access panel cover and insulation and snap in position. 17. Turn on power to the water heater. 21

22 EXCLUSIVE WARRANTY LIMITATION OF LIABILITY LIMITED WARRANTY Marathon Electric Water Heaters This Limited Warranty is the only Warranty for this unit given by Rheem Sales Co. Inc., a subsidiary of Rheem Manufacturing Company. No one is authorized to make any other warranties on our behalf. ANY IMPLIED WARRANTIES, INCLUDING MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, SHALL NOT EXTEND BEYOND THE APPLICABLE WARRANTY PERIODS SPECIFIED PREVIOUSLY. RHEEM S SOLE LIABILITY, WITH RESPECT TO ANY DEFECT, SHALL BE AS SET FORTH IN THIS LIMITED WARRANTY, AND ANY CLAIMS FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGE FROM WATER LEAKAGE) ARE EXCLUDED. Some states do not allow limitations on how long an implied warranty lasts, or for the exclusion of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This Limited Warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. We suggest you immediately complete the information below and retain it in the event warranty service is needed. Reasonable proof of the date of installation of your water heater may be required to establish its in-warranty status. Otherwise, the Effective Date of this Limited Warranty will be the date of manufacture of the water heater plus ninety (90) days. GENERAL Rheem Sales Co. Inc., Inc. warrants its products to be free from factory defects in materials and workmanship, under normal use and service, for the Applicable Warranty Period. At its option, Rheem Sales Co. Inc. will repair or replace the defective water heater, or defective component part(s), in accordance with the terms of this Limited Warranty, if it fails in normal use and service during the Applicable Warranty Period. The replacement water heater must be manufactured by Rheem Sales Co. Inc.. The replacement component part(s) must be Rheem Sales Co. Inc. authorized component part(s). The replacement unit will be warranted only for the unexpired portion of the original unit s Applicable Warranty Period. WARRANTY EXCLUSIONS This Limited Warranty will not cover: a) Service trips to your home to teach you how to install, use, or maintain this water heater or to bring the water heater installation into compliance with local building codes and regulations. b) Damages, malfunctions or failures resulting from failure to install the water heater in accordance with applicable building codes/ordinances or good plumbing and electrical trade practices. c) Damages, malfunctions, or failures resulting from improper installation or failure to operate and maintain the water heater in accordance with the manufacturer s instructions provided. d) Performance problems caused by improper sizing of the water heater or electric service voltage, wiring, or fusing. e) Damages, malfunctions, or failures caused by operating the water heater with modified, altered, or unapproved parts installed. f) Damages, malfunctions, or failures caused by abuse, accident, fire, flood, freeze, lightning, acts of God, and the like. g) Tank failures (leaks) caused by operating the water heater in a corrosive or contaminated atmosphere. h) Damages, malfunctions, or failures caused by operating the water heater with an empty, or partially empty, tank (also known as dry firing ). i) Damages, malfunctions, or failures caused by operating the unit at water temperatures exceeding the maximum setting of the operating, or high limit, control. j) Tank failures caused by operating the water heater when it is not supplied with potable water, free to circulate at all times. k) Damages, malfunctions or failures caused by subjecting the tank to pressures greater than those shown on the rating label. l) Damages, malfunctions or failures resulting from the use of any attachment, including any energy saving device, not authorized by Rheem Sales Co. Inc.. m) Units installed outside the fifty states (and the District of Columbia) of the United States of America and the provinces of Canada without prior authorization from Rheem Sales Co. Inc.. n) Units that have had their rating labels removed. A water heater should not be operated if the rating label is removed. LABOR, SHIPPING, AND PROCESSING COSTS This Limited Warranty does not cover any labor expenses for service, repairs, reinstallation, permits, or removal and disposal of the failed water heater, or defective component part(s). All such expenses are your responsibility. Rheem Sales Co. Inc. will pay the transportation costs for an in-warranty replacement water heater, or in-warranty replacement component part(s), to a convenient delivery point (selected by Rheem Sales Co. Inc.) near the place the original water heater, or original component part(s), is located. You must pay any local freight charges, including the cost of returning the failed water heater, or defective component part(s) to a convenient shipping location (selected by Rheem Sales Co. Inc.). Rheem Sales Co. Inc. does not authorize, recommend, or receive any benefit from any claims processing or similar fees charged by others to process warranty claims for any Rheem Sales Co. Inc. water heater or component part(s). Rheem Sales Co. Inc. will not reimburse any party for these, or any other, fees not specifically covered in this Limited Warranty document. THE EFFECTIVE DATE The Effective Date of warranty coverage (or the beginning of the Applicable Warranty Periods) is the date of installation of the water heater, if properly documented. If you are not able to provide the documentary proof of the date of original installation, the Effective Date will be the date of manufacture of the water heater plus 90 days. 22

23 APPLICABLE WARRANTY PERIODS Category Application MR & MTS Series MHD Series Tank Parts Tank Parts Owned by the original purchaser with proof of purchase And Water heater is registered online within 90 days of the installation date Extended* LIFETIME Extended* 6 years Extended* LIFETIME Extended* 6 years Single family dwelling The original purchaser does not have proof of purchase; or Home is not owned by the original purchaser or Installed in the Caribbean Islands (except Cuba) In accordance with applicable US law, this product must not be sold or re-sold into Cuba or to the Cuban government or Cuban nationals. This limited warranty is void with respect to any products installed in Cuba or otherwise sold in violation of US law. 10 Years 1 year 10 years 1 year 10 years 1 Year 10 years 1 year Commercial The unit is part of a rental program; or The unit is moved from its original installation location A residential rental property; or Installed in a commercial building Any agricultural application (ex dairy barn) Any application where the water is used as a part of an industrial or commercial process 5 years 1 year 5 years 1 year * Extended warranty is provided to original customer after online product registration under residential installation HOW TO MAKE A CLAIM Any claim for warranty assistance must be made promptly. First, determine if your water heater is in-warranty (that is, within the Applicable Warranty Period). You can determine your unit s warranty status by obtaining the complete model number, the complete serial number, and the date of installation of your water heater by contacting Rheem Sales Co. Inc. Water Heaters Warranty Department (telephone (800) ) during normal business hours to determine if the Applicable Warranty Period has expired. If your water heater is in-warranty, contact the plumber, or mechanical contractor, that installed it for assistance with the warranty repairs, or replacement, required. You may also select a plumber, or mechanical contractor, from your local Yellow Pages to assist you. Rheem Sales Co. Inc. Technical Service personnel are available to assist you by telephone (800) to answer your questions about the operation or repair of your water heater during normal business hours. Be prepared to provide the plumber, mechanical contractor, or Rheem Sales Co. Inc. Technical Service person you call with the complete model number, the complete serial number, and the date of installation of your water heater in addition to an explanation of your water heater problem. If an exact replacement is not available, Rheem Sales Co. Inc. will provide you with the current model of your water heater, or component part(s), or a replacement unit with comparable operating features. If government regulations or industry certification or similar standards require the replacement water heater, or replacement component part(s), to have features not found in the defective water heater, or the defective component part(s), you will be charged for the difference in price represented by those required features. If you pay the price difference for those required features and/or to upgrade the size and/or other features available on a replacement new water heater, you will also receive a complete new Limited Warranty (with the full Applicable Warranty Period) for the replacement new water heater. Rheem Sales Co. Inc. reserves the right to inspect, or require the return of, the failed water heater or the defective component part(s). Each in-warranty failure water heater must be made available to Rheem Sales Co. Inc. (with the rating label and all the component parts intact) in exchange for the replacement water heater. Each defective in-warranty component part to be replaced may be required to be returned to Rheem Sales Co. Inc. in exchange for the replacement component part. Warranty compensation is subject to validation of in-warranty coverage by Rheem Sales Co. Inc. Claims Department personnel. To obtain warranty compensation for an in-warranty water heater failure, you must provide Rheem Sales Co. Inc. with: (at Rheem Sales Co. Inc. option) either the failed water heater (with the rating label and all the component parts intact) or the complete original rating label (photocopies are not acceptable) removed from the failed water heater; the complete model number and the complete serial number of the Marathon water heater that replaced the failed unit; and the date the original water heater failed. You may also be required to provide documentary proof of the failed water heater s date of installation to establish its in-warranty status. To receive warranty compensation for an in-warranty defective component part, you must provide WHI with: (at Rheem Sales Co. Inc. option) either the defective component part or the part number on the failed component part; the complete model number and the complete serial number of the Marathon water heater from which the defective component part was removed; and the date the defective component part failed. You may also be required to provide documentary proof of the date of installation of the Marathon water heater from which the defective part was removed or the date of purchase of the part (if it was purchased separately) - to establish the in-warranty status of the defective component part. 23

Use & Care Manual. Electric Tankless Water Heaters. With Installation Instructions for the Installer AP15447 (10/10)

Use & Care Manual. Electric Tankless Water Heaters. With Installation Instructions for the Installer AP15447 (10/10) Use & Care Manual With Installation Instructions for the Installer Electric Tankless Water Heaters The purpose of this manual is twofold: one, to provide the installer with the basic directions and recommendations

More information

Use & Care Manual. Electric Water Heaters. With Installation Instructions for the Installer. Single and Double Element Models, 15 105 Gallon

Use & Care Manual. Electric Water Heaters. With Installation Instructions for the Installer. Single and Double Element Models, 15 105 Gallon Use & Care Manual With Installation Instructions for the Installer Electric Water Heaters Single and Double Element Models, 15 105 Gallon The purpose of this manual is twofold: one, to provide the installer

More information

Water Heaters. Use & Care Manual. Electric Point of Use IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS

Water Heaters. Use & Care Manual. Electric Point of Use IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Electric Point of Use Water Heaters LISTED 786H IMPORTANT SAFETY INSTRUCTIONS Printed in USA Use & Care Manual With Installation Instructions for the Installer The purpose of this manual is twofold: one,

More information

CALIFORNIA PROPOSITION 65 WARNING:

CALIFORNIA PROPOSITION 65 WARNING: Residential Solar Water Heater USE & CARE MANUAL WITH INSTALLATION INSTRUCTIONS FOR THE CONTRACTOR LISTED 786H The purpose of this manual is twofold: one, for the installing contractor, to provide requirements

More information

USE & CARE MANUAL. Non-Metallic Electric Water Heater. Residential Electric Models 30-105 Gallon Capacity

USE & CARE MANUAL. Non-Metallic Electric Water Heater. Residential Electric Models 30-105 Gallon Capacity Non-Metallic Electric Water Heater USE & CARE MANUAL WITH INSTALLATION INSTRUCTIONS FOR THE INSTALLER Residential Electric Models 30-05 Gallon Capacity TM The purpose of this manual is twofold: one, for

More information

Use & Care Manual. Electric Residential Water Heaters. With Installation Instructions for the Installer. with Electronic Control AP16697-1 (10/13)

Use & Care Manual. Electric Residential Water Heaters. With Installation Instructions for the Installer. with Electronic Control AP16697-1 (10/13) Use & Care Manual With Installation Instructions for the Installer Electric Residential Water Heaters with Electronic Control The purpose of this manual is twofold: one, to provide the installer with the

More information

Water Heaters. Use & Care Manual. Electric Residential. With Installation Instructions for the Installer

Water Heaters. Use & Care Manual. Electric Residential. With Installation Instructions for the Installer Electric Residential Water Heaters Use & Care Manual With Installation Instructions for the Installer Single and Double Element Models, Residential 0 0 Gallon The purpose of this manual is twofold: one,

More information

Use & Care Manual. Electric Residential Water Heaters. With Installation Instructions for the Installer

Use & Care Manual. Electric Residential Water Heaters. With Installation Instructions for the Installer Use & Care Manual With Installation Instructions for the Installer Electric Residential Water Heaters Single and Double Element Models, Residential 0 0 Gallon The purpose of this manual is twofold: one,

More information

Use & Care Manual. Electric Residential Heat Pump Water Heaters. With Installation Instructions for the Installer. Residential 50 Gallon - HB Series

Use & Care Manual. Electric Residential Heat Pump Water Heaters. With Installation Instructions for the Installer. Residential 50 Gallon - HB Series Electric Residential Heat Pump Water Heaters Use & Care Manual With Installation Instructions for the Installer Residential 50 Gallon - HB Series The purpose of this manual is twofold: one, to provide

More information

Use & Care Manual. Electric Residential Heat Pump Water Heaters. With Installation Instructions for the Installer. Residential 50 Gallon - HB Series

Use & Care Manual. Electric Residential Heat Pump Water Heaters. With Installation Instructions for the Installer. Residential 50 Gallon - HB Series Electric Residential Heat Pump Water Heaters Use & Care Manual With Installation Instructions for the Installer Residential 50 Gallon - HB Series The purpose of this manual is twofold: one, to provide

More information

Electric Water Heater

Electric Water Heater Electric Water Heater Operation and Installation Manual (LIMITED WARRANTY AND TANK REPLACEMENT POLICY) The following information should be noted at time of installation and retained for future reference.

More information

INDIRECT WATER HEATER. Installation and Operating Instruction Manual

INDIRECT WATER HEATER. Installation and Operating Instruction Manual INDIRECT WATER HEATER Installation and Operating Instruction Manual Maximum supply temperature to heat exchanger must not exceed 180 F (82 C). Safety Warning: Indirect water heaters are heat-producing

More information

USE & CARE MANUAL. Residential Solar Water Heater with Heat Exchanger WITH INSTALLATION INSTRUCTIONS FOR THE CONTRACTOR

USE & CARE MANUAL. Residential Solar Water Heater with Heat Exchanger WITH INSTALLATION INSTRUCTIONS FOR THE CONTRACTOR Residential Solar Water Heater with Heat Exchanger USE & CARE MANUAL WITH INSTALLATION INSTRUCTIONS FOR THE CONTRACTOR LISTED Solar Water Heater 96G1 The purpose of this manual is twofold: one, for the

More information

CARING FOR YOUR WATER HEATER

CARING FOR YOUR WATER HEATER http://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html Water Heater Inspections CARING FOR YOUR WATER HEATER Venting System (Direct Vent Only) The venting system should be inspected

More information

INSTANT HOT WATER RECIRCULATING SYSTEM

INSTANT HOT WATER RECIRCULATING SYSTEM INSTANT HOT WATER RECIRCULATING SYSTEM INSTALLATION AND OPERATING INSTRUCTIONS Save manual for future reference MODEL 500800 Warning Please read carefully before proceeding with installation. Your failure

More information

OWNER S MANUAL FORCE 10 MARINE COMPANY 23080 HAMILTON ROAD RICHMOND, BC CANADA V6V 1C9 TEL: (604) 522-0233 FAX: (604) 522-9608

OWNER S MANUAL FORCE 10 MARINE COMPANY 23080 HAMILTON ROAD RICHMOND, BC CANADA V6V 1C9 TEL: (604) 522-0233 FAX: (604) 522-9608 Electric Water Heater OWNER S MANUAL FORCE 10 MARINE COMPANY 23080 HAMILTON ROAD RICHMOND, BC CANADA V6V 1C9 TEL: (604) 522-0233 FAX: (604) 522-9608 If your water Heater is Damaged or you have questions

More information

Indirect-Fired Storage Water Heater Models WH-30 through WH-80 INSTALLATION AND OPERATING INSTRUCTIONS

Indirect-Fired Storage Water Heater Models WH-30 through WH-80 INSTALLATION AND OPERATING INSTRUCTIONS Indirect-Fired Storage Water Heater Models WH-30 through WH-80 INSTALLATION AND OPERATING INSTRUCTIONS Contents Page Ratings and Specifications..................... 2 Installation Requirements......................

More information

DTM04 TANK MONITOR DTM08 TANK MONITOR Dtm12 TANK MONITOR. Installation and Operation Manual

DTM04 TANK MONITOR DTM08 TANK MONITOR Dtm12 TANK MONITOR. Installation and Operation Manual DTM04 TANK MONITOR DTM08 TANK MONITOR Dtm12 TANK MONITOR Installation and Operation Manual 1 ENGLISH Safety Instructions 2 Features 2-3 Specifications 3 Installation 4-5 Wiring Diagrams 6-7 Warranty 8

More information

ELECTRIC WATER HEATER INSTALLATION & OPERATING INSTRUCTION MANUAL

ELECTRIC WATER HEATER INSTALLATION & OPERATING INSTRUCTION MANUAL ELECTRIC WATER HEATER A Spanish language version of these instructions is available by contacting the manufacturer listed on the rating plate. La version espanola de estas instruccions se puede obtener

More information

Seaward Products OWNER S MANUAL WATER HEATERS. Serial Number:

Seaward Products OWNER S MANUAL WATER HEATERS. Serial Number: Seaward Products WATER HEATERS OWNER S MANUAL Serial Number: IMPORTANT SAFETY INSTRUCTIONS WARNING When using electrical appliances, basic safety precautions to reduce the risk of fire, electrical shock,

More information

SHC 2.5, SHC 4 MINI-TANK ELECTRIC WATER HEATERS INSTALLATION INSTRUCTIONS FOR THE LICENSED PLUMBER SHC 2.5 SHC 4. English. English

SHC 2.5, SHC 4 MINI-TANK ELECTRIC WATER HEATERS INSTALLATION INSTRUCTIONS FOR THE LICENSED PLUMBER SHC 2.5 SHC 4. English. English SHC 2.5, SHC 4 MINI-TANK ELECTRIC WATER HEATERS INSTALLATION INSTRUCTIONS FOR THE LICENSED PLUMBER The SHC series is tested and certified by WQA against NSF/ANSI 372 for lead free compliance. SHC 2.5 Table

More information

2010 Residential Water Heater Replacement Check List

2010 Residential Water Heater Replacement Check List 2010 Residential Water Heater Replacement Check List The intent of this check list is to provide installers a general reference for the enforcement of code requirements in the Greater San Diego Area. This

More information

AMX300 DirectConnect Mixing Valve Kits

AMX300 DirectConnect Mixing Valve Kits AMX300 DirectConnect Mixing Valve Kits INSTALLATION INSTRUCTIONS Tools needed (not supplied) 1. Wrench 2. Pliers Safety Definitions These safety terms identify information you must read. CAUTION Indicates

More information

INSTALLATION INSTRUCTIONS & HOME OWNERS MANUAL EEMAX ELECTRIC TANKLESS WATER HEATERS IMPORTANT SAFETY INFORMATION

INSTALLATION INSTRUCTIONS & HOME OWNERS MANUAL EEMAX ELECTRIC TANKLESS WATER HEATERS IMPORTANT SAFETY INFORMATION INSTALLATION INSTRUCTIONS & HOME OWNERS MANUAL EEMAX ELECTRIC TANKLESS WATER HEATERS IMPORTANT SAFETY INFORMATION When installing or using any high voltage electrical appliance, basic safety precautions

More information

Installation and Operating Instruction Manual

Installation and Operating Instruction Manual Electric Mini Tank Water Heaters CMT-1.3 CMT-2.5 CMT-4.0 CMT-ST70 Tempering valve Optionally available Installation and Operating Instruction Manual Table of Contents Important Safety Instructions 3 General

More information

LIGHT DUTY COMMERCIAL ELECTRIC WATER HEATER INSTALLATION & OPERATING INSTRUCTION MANUAL

LIGHT DUTY COMMERCIAL ELECTRIC WATER HEATER INSTALLATION & OPERATING INSTRUCTION MANUAL LIGHT DUTY COMMERCIAL ELECTRIC WATER HEATER A Spanish language version of these instructions is available by contacting the company listed on the rating plate. La versión espãnola de estas instrucciones

More information

SERVICE MANUAL RESIDENTIAL ELECTRIC AND LIGHT DUTY COMMERCIAL ELECTRIC WATER HEATERS. Troubleshooting Guide and Instructions for Service

SERVICE MANUAL RESIDENTIAL ELECTRIC AND LIGHT DUTY COMMERCIAL ELECTRIC WATER HEATERS. Troubleshooting Guide and Instructions for Service RESIDENTIAL ELECTRIC AND LIGHT DUTY COMMERCIAL ELECTRIC WATER HEATERS SERVICE MANUAL Troubleshooting Guide and Instructions for Service (To be performed ONLY by qualified service providers) Models Covered

More information

BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS

BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE

More information

Mini Tank water heater Electric undersink Water heaters GL 2.5 - GL 4 - GL 6+

Mini Tank water heater Electric undersink Water heaters GL 2.5 - GL 4 - GL 6+ Mini Tank water heater Electric undersink Water heaters GL 2.5 - GL 4 - GL 6+ IMPORTANT SAFETY INSTRUCTIONS WARNING When using electrical appliances, safety precautions to reduce the risk of fire, electric

More information

Overview PARTS LIST. B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve washer

Overview PARTS LIST. B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve washer Overview READ ENTIRE INSTRUCTIONS BEFORE STARTING INSTALLATION PARTS LIST A. Flush valve B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve

More information

Your safety and the safety of others are very important.

Your safety and the safety of others are very important. NATURAL GAS TO PROPANE CONVERSION KIT 090 INSTALLATION INSTRUCTIONS FOR ALTITUDES 0 -,00 FT. ONLY PROPANE CONVERSION KIT SAFETY... INSTALLATION REQUIREMENTS... Tools and Parts... LP Gas Requirements...

More information

Solar Storage Tank Water Heater. Table Of Contents PAGE 2 3-8 3 4 4-5 6-8 9 10-12 10 11 12 12-13 14 15

Solar Storage Tank Water Heater. Table Of Contents PAGE 2 3-8 3 4 4-5 6-8 9 10-12 10 11 12 12-13 14 15 Solar Storage Tank Water Heater Installation Instructions and Use & Care Guide To obtain technical, warranty or service assistance during or after the installation of this water heater, call toll free

More information

INSTALLATION INSTRUCTIONS & HOME OWNERS MANUAL ECO 18 ECO 24 ECO 27 IMPORTANT SAFETY INFORMATION

INSTALLATION INSTRUCTIONS & HOME OWNERS MANUAL ECO 18 ECO 24 ECO 27 IMPORTANT SAFETY INFORMATION INSTALLATION INSTRUCTIONS & HOME OWNERS MANUAL ECO 18 ECO 24 ECO 27 IMPORTANT SAFETY INFORMATION As when installing or using any high voltage electrical appliance, basic safety precautions should always

More information

Mini Tank. Electric Mini Tank Water Heaters WM-1.0 WM-2.5 WM-4.0 WM-6.0. Installation and Operating Instruction Manual

Mini Tank. Electric Mini Tank Water Heaters WM-1.0 WM-2.5 WM-4.0 WM-6.0. Installation and Operating Instruction Manual Mini Tank Electric Mini Tank Water Heaters WM-1.0 WM-2.5 WM-4.0 WM-6.0 Installation and Operating Instruction Manual Table of Contents Important Safety Instructions 3 General Information 3/6 Technical

More information

INSTALLATION, OPERATING AND SERVICE INSTRUCTIONS

INSTALLATION, OPERATING AND SERVICE INSTRUCTIONS INSTALLATION, OPERATING AND SERVICE INSTRUCTIONS HEAT-FLO HOT WATER STORAGE / BOOSTER TANKS MODELS 30-ST, 40-ST, 40L-ST, 60-ST, 60L-ST, 80-ST, 115-ST, 80-ST-C, 115-ST-C FOR SINGLE TANK INSTALLATIONS For

More information

COMMERCIAL ELECTRIC WATER HEATER INSTALLATION & OPERATING INSTRUCTION MANUAL

COMMERCIAL ELECTRIC WATER HEATER INSTALLATION & OPERATING INSTRUCTION MANUAL COMMERCIAL ELECTRIC WATER HEATER La A version Spanish espanola language de version estas of instrucciones these instructions se puede is available obtener al by escribirle contacting a la the fábrica company

More information

Installation Instructions and Use & Care Guide

Installation Instructions and Use & Care Guide Residential Electric Water Heater Installation Instructions and Use & Care Guide To obtain technical, warranty or service assistance during or after the installation of this water heater, call toll free

More information

Installation Manual DIAPHRAGM WELL TANK

Installation Manual DIAPHRAGM WELL TANK Installation Manual DIAPHRAGM WELL TANK IN-LINE SERIES: 2-5 & 7 GALLON VERTICAL SERIES: 14-20-25-32-36-52-65-86-96-119 GALLON HORIZONTAL SERIES: 7-14 & 20 GALLON NO LEAD NO LEAD: The weighted average of

More information

Electric Mini Tank Water Heaters WM-2.5 & WM-4.0

Electric Mini Tank Water Heaters WM-2.5 & WM-4.0 Electric Mini Tank Water Heaters WM-2.5 & WM-4.0 Installation and Operating Instruction Manual Table of Contents Important Safety Instructions 2 Technical Data 3-4 General Information 5 Technical Description

More information

RESIDENTIAL ELECTRIC WATER HEATER OWNER S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS

RESIDENTIAL ELECTRIC WATER HEATER OWNER S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS RESIDENTIAL ELECTRIC WATER HEATER OWNER S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS DANGER If the information in these instructions is not followed exactly, a fire or explosion may result causing

More information

Installation and Troubleshooting Instructions for Electric Tankless Residential Water Heaters.

Installation and Troubleshooting Instructions for Electric Tankless Residential Water Heaters. Model Number: Serial Number: Information Manual Installation and Troubleshooting Instructions for Electric Tankless Residential Water Heaters. ATTENTION: IF YOU ARE NOT A LICENSED PLUMBER OR A LICENSED

More information

Residential Electric Water Heater

Residential Electric Water Heater Residential Electric Water Heater Installation Instructions and Use & Care Guide To obtain technical, warranty or service assistance during or after the installation of this water heater, call toll free

More information

Energy Smart Residential Electric Water Heater Installation Instructions

Energy Smart Residential Electric Water Heater Installation Instructions Use & Care Guide http://waterheatertimer.org/whirlpool-energy-smart-electric.html Energy Smart Residential Electric Water Heater Installation Instructions and Use & Care Guide To obtain technical, warranty,

More information

Utility Distribution Systems

Utility Distribution Systems Utility Distribution Systems 6/2012 A0011037 1 WARRANTY This equipment is warranted to be free from defects in materials and workmanship, under normal use and service, for a period of 12 months from date

More information

Ceiling Mount Air Handler Manual

Ceiling Mount Air Handler Manual www.surna.com 303.993.5271 Ceiling Mount Air Handler Manual Models: CMAH12, CMAH18, CMAH24, CMAH30, CMAH36, CMAH48, CMAH60 Revised: September 2014 Table of Contents Warranty Information 4 Limited Warranty

More information

Sun Bandit Hybrid Water Heater Installation, Operation and Solar Hybrid Energy Systems Patent(s) Pending

Sun Bandit Hybrid Water Heater Installation, Operation and Solar Hybrid Energy Systems Patent(s) Pending Solar Hybrid Energy Systems Patent(s) Pending Sun Bandit Hybrid Water Heater Installation, Operation and Solar Hybrid Energy Systems Patent(s) Pending Maintenance Manual Solar Hybrid Energy Systems Patent(s)

More information

Air Conditioner Water Heater Model ACWH18

Air Conditioner Water Heater Model ACWH18 Air Conditioner Water Heater Model ACWH18 Installation Guide IMPORTANT! READ THIS FIRST! Commissioning of this unit must be done by a licensed HVAC technician. Commissioning includes making the electrical

More information

How To Install An Evaporator Coil

How To Install An Evaporator Coil EVAPORATOR COIL INSTALLATION INSTRUCTIONS EVAPORATOR COIL SAFETY... INSTALLATION REQUIREMENTS... Tools and Parts... System Requirements... Location Requirements... Drain Requirements... INSTALLATION INSTRUCTIONS...

More information

INSTALLATION INSTRUCTIONS Fan Coil Replacement Coil Kit EBX & EBXX

INSTALLATION INSTRUCTIONS Fan Coil Replacement Coil Kit EBX & EBXX Fan Coil Replacement Coil Kit EBX & EBXX These instructions must be read and understood completely before attempting installation. These instructions covers the installation of replacement coil kit into

More information

Electric Mini Tank Water Heaters

Electric Mini Tank Water Heaters Electric Mini Tank Water Heaters EMT1 - EMT2.5 - EMT4 - EMT6 Installation and Operating Instruction Manual Table of Contents Important Safety Instructions 2 Technical Data 3-4 General Information 5 Technical

More information

Everlast Electric Water Heater

Everlast Electric Water Heater Everlast Electric Water Heater INSTALLATION START-UP MAINTENANCE PARTS Everlast Water Heater Models EV-6 / EV-12 / EV-20 / EV-30 EV-30LB / EV-45LB / EV-50 / EV-80 California Proposition 65 Warning: This

More information

I N S T ALLATION INSTRUCTIONS & HOME OWNERS MANUAL IMPORTANT SAFETY INFORMATION

I N S T ALLATION INSTRUCTIONS & HOME OWNERS MANUAL IMPORTANT SAFETY INFORMATION I N S T ALLATION INSTRUCTIONS & HOME OWNERS MANUAL MODELS: HA018240 HA024240 HA027240 HA036240 IMPORTANT SAFETY INFORMATION As when installing or using any high voltage electrical appliance, basic safety

More information

THERMOSTATIC MIXING VALVE TRIM K-T9493, K-T9494

THERMOSTATIC MIXING VALVE TRIM K-T9493, K-T9494 THERMOSTATIC MIXING VALVE TRIM K-T9493, K-T9494 1. BEFORE YOU BEGIN IMPORTANT INSTRUCTIONS READ AND SAVE FOR THE CONSUMER WARNING: Risk of scalding or other severe injury. Before completing installation,

More information

INSTALLATION INSTRUCTIONS AND HOMEOWNER MANUAL

INSTALLATION INSTRUCTIONS AND HOMEOWNER MANUAL INSTALLATION INSTRUCTIONS AND HOMEOWNER MANUAL MODELS: AH27, AH24, AH21, AH18, AH16, AH14, & AH 11 IMPORTANT SAFETY INFORMATION As when installing or using any high voltage electrical appliance, basic

More information

INSTALLATION, OPERATING, AND SERVICE INSTRUCTIONS

INSTALLATION, OPERATING, AND SERVICE INSTRUCTIONS INSTALLATION, OPERATING, AND SERVICE INSTRUCTIONS HEAT-FLO HOT WATER STORAGE/ BOOSTER TANKS MODELS 30-ST, 40-ST, 40L-ST, 60-ST, 60L-ST 80-ST, 115-ST, 80-ST-C, 115-ST-C Conforms to UL STD 174 and NSF/ANSI

More information

Electric Mini Tank Water heaters GL 2.5 - GL 4 - GL 6+

Electric Mini Tank Water heaters GL 2.5 - GL 4 - GL 6+ Electric Mini Tank Water heaters GL 2.5 - GL 4 - GL 6+ IMPORTANT SAFETY INSTRUCTIONS WARNING When using electrical appliances, safety precautions to reduce the risk of fire, electric shock or injury to

More information

Section 43. Lead Paint Risk Factor NONE WATER HEATER STORAGE ELECTRIC

Section 43. Lead Paint Risk Factor NONE WATER HEATER STORAGE ELECTRIC WATER HEATER STORAGE ELECTRIC Lead Paint Risk Factor NONE TABLE OF CONTENTS PART 1: INSTALLATION REQUIREMENTS FOR CONVENTIONAL HOMES... 1 WATER HEATER REPAIRS... 1 1. APPLIANCE REPAIR... 1 WATER HEATER

More information

SERIES 12-600 VOLT ELECTRIC INSTANTANEOUS WATER HEATER FOR EMERGENCY SAFTEY EQUIPMENT INSTALLATION AND OWNERS MANUAL REQUIRED MANTENANCE

SERIES 12-600 VOLT ELECTRIC INSTANTANEOUS WATER HEATER FOR EMERGENCY SAFTEY EQUIPMENT INSTALLATION AND OWNERS MANUAL REQUIRED MANTENANCE Eemax Inc., 353 Christian Street, Oxford, CT 06478 1 E ema X SERIES 12-600 VOLT ELECTRIC INSTANTANEOUS WATER HEATER FOR EMERGENCY SAFTEY EQUIPMENT INSTALLATION AND OWNERS MANUAL REQUIRED MANTENANCE WARNING

More information

Techtanium Solar Indirect Water Heater Instruction Manual

Techtanium Solar Indirect Water Heater Instruction Manual To the Installer: Please attach these instructions next to the water heater. To the Consumer: Please read these and all component instructions and keep for future reference. Techtanium Solar Indirect Water

More information

Geyser-R Heat pump water heater Installation manual

Geyser-R Heat pump water heater Installation manual Geyser-R Heat pump water heater Installation manual 1 Version 2.9 SAFETY INFORMATION Please read carefully to prevent serious accidents or injury. The Geyser-R Heat Pump Water Heater must be installed

More information

MODEL G300 BRAKE BLEEDER

MODEL G300 BRAKE BLEEDER MODEL G300 BRAKE BLEEDER Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV060616 P/N: 81-0035G 1 THIS PAGE INTENTIONALLY

More information

ALL WEATHER W-SERIES QUARTZ TUBE ELECTRIC INFRARED RADIANT HEATER INSTALLATION USE & CARE MANUAL

ALL WEATHER W-SERIES QUARTZ TUBE ELECTRIC INFRARED RADIANT HEATER INSTALLATION USE & CARE MANUAL ALL WEATHER W-SERIES QUARTZ TUBE ELECTRIC INFRARED RADIANT HEATER TABLE OF CONTENTS: INSTALLATION USE & CARE MANUAL IMPORTANT INFORMATION Assembly Instructions 2 Wiring Instructions 2 Outdoor Installation

More information

Sun Bandit Hybrid Water Heater Installation, Operation and Solar Hybrid Energy Systems Patent(s) Pending

Sun Bandit Hybrid Water Heater Installation, Operation and Solar Hybrid Energy Systems Patent(s) Pending Solar Hybrid Energy Systems Patent(s) Pending Sun Bandit Hybrid Water Heater Installation, Operation and Solar Hybrid Energy Systems Patent(s) Pending Maintenance Manual Solar Hybrid Energy Systems Patent(s)

More information

Fleck 4650. Service Manual INSTALLATION AND START-UP PROCEDURE TABLE OF CONTENTS JOB SPECIFICATION SHEET

Fleck 4650. Service Manual INSTALLATION AND START-UP PROCEDURE TABLE OF CONTENTS JOB SPECIFICATION SHEET Fleck 4650 Service Manual TABLE OF CONTENTS JOB SPECIFICATION SHEET...1 INSTALLATION AND START-UP PROCEDURE...1 CONTROL VALVE DRIVE ASSEMBLY...2 CONTROL DRIVE ASSEMBLY FOR CLOCK...3 BYPASS VALVE ASSEMBLY...4

More information

Light Duty Commercial Electric Water Heaters

Light Duty Commercial Electric Water Heaters Use and Care Manual Installation Start-Up Maintenance Parts Warranty Light Duty Commercial Electric Water Heaters This manual must only be used by a qualified installer / service technician. Read all instructions

More information

Instruction Manual. A DIVISION OF A. O. SMITH CORPORATION RENTON, WASHINGTON www.hotwater.com

Instruction Manual. A DIVISION OF A. O. SMITH CORPORATION RENTON, WASHINGTON www.hotwater.com Instruction Manual Commercial Semi-Instantaneous Water Heaters ALL HWI MODELS INSTALLATION - OPERATION - SERVICE - MAINTENANCE - LIMITED WARRANTY A DIVISION OF A. O. SMITH CORPORATION RENTON, WASHINGTON

More information

Propane Conversion Kit PROPANE CONVERSION KIT INSTALLATION MANUAL

Propane Conversion Kit PROPANE CONVERSION KIT INSTALLATION MANUAL Propane Conversion Kit Supersedes: 145.25-IOM2 (708) Form 145.25-IOM2 (908) PROPANE CONVERSION KIT INSTALLATION MANUAL "LPKIT " - PROPANE CONVERSION KIT Kits are available for field conversion from natural

More information

Heat Pump Water Heater

Heat Pump Water Heater Heat Pump Water Heater INSTALLATION START-UP MAINTENANCE PARTS Hybrid Electric Heat Pump Water Heater Models HPW-50-6 This manual must be used by a qualified installer/service technician. Read all instructions

More information

Name of Equipment Silver King Model SKMCD1P/C1. This equipment chapter is to be inserted in the appropriate section of the Equipment Manual.

Name of Equipment Silver King Model SKMCD1P/C1. This equipment chapter is to be inserted in the appropriate section of the Equipment Manual. Name of Equipment Silver King Model SKMCD1P/C1 This equipment chapter is to be inserted in the appropriate section of the Equipment Manual. Manufactured exclusively for McDonald s By Silver King Refrigeration,

More information

Oil and Coolant Circulating Heating System. Model - OCSM

Oil and Coolant Circulating Heating System. Model - OCSM Oil and Coolant Circulating Heating System Model - OCSM Installation & Operation Manual 216280-000 REV 2 Identifying Your System The HOTSTART heating system is designed to heat fluids for use in marine

More information

Hot, Warm and Cold Mineral Water Cooler [Models Cool18, Cool25, Cool36, Cool50, Cool75, Cool100]

Hot, Warm and Cold Mineral Water Cooler [Models Cool18, Cool25, Cool36, Cool50, Cool75, Cool100] Hot, Warm and Cold Mineral Water Cooler [Models Cool18, Cool25, Cool36, Cool50, Cool75, Cool100] PLEASE READ BEFORE INSTALLATION TO PREVENT DAMAGE TO THE COOLER HOT WATER TANK STEAM EXAUST VENT (CAUTION!)

More information

RESIDENTIAL HUD SIDE PLUMBING ELECTRIC WATER HEATERS

RESIDENTIAL HUD SIDE PLUMBING ELECTRIC WATER HEATERS Instruction Manual RESIDENTIAL HUD SIDE PLUMBING ELECTRIC WATER HEATERS FOR POTABLE WATER HEATING ONLY NOT SUITABLE FOR SPACE HEATING LISTED GAMA certification applies to all residential electric water

More information

TABLE 1. Rugged cast aluminum alloy casing,celcon waterways with nichrome parts White (unless stainless steel housing)

TABLE 1. Rugged cast aluminum alloy casing,celcon waterways with nichrome parts White (unless stainless steel housing) CHRONOMITE INSTANT-FLOW MICRO WATER HEATER INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected) TABLE 1 Model No.

More information

WARNING: FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY CAUTION: INSTALLATION LOCATION:

WARNING: FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY CAUTION: INSTALLATION LOCATION: Revision Level: 01 Revision Date: 07/07/2011 Please read all instructions carefully to help ensure a correct and SAFE installation of your Second Wind Ultraviolet Germicidal Air Purifier. Failure to do

More information

Generator Transfer Switch Model # HTS15-AUTO

Generator Transfer Switch Model # HTS15-AUTO Generator Transfer Switch Model # HTS15-AUTO Congratulations on your purchase of our Single Circuit Generator Transfer Switch, We hope this meets and exceeds your expectations. If at anytime you have any

More information

Cleaning Instructions, Pilot Replacement and Valve Change. Model No.: 233010 Natural Gas

Cleaning Instructions, Pilot Replacement and Valve Change. Model No.: 233010 Natural Gas Cleaning Instructions, Pilot Replacement and Valve Change Model No.: 233010 Natural Gas 8mm open-end wrench 9mm open-end wrench 10mm open-end wrench 12mm open-end wrench 13mm open-end wrench Phillips screw

More information

USE &CARE GUIDE. Remote Faucet Pump System. See Important Safeguards on page 2

USE &CARE GUIDE. Remote Faucet Pump System. See Important Safeguards on page 2 Remote Faucet Pump System USE &CARE GUIDE See Important Safeguards on page 2 An exclamation point within an equilateral triangle is intended to alert user to the presence of important operating and maintenance

More information

TWIN EAGLES ALL WEATHER ELECTRIC RADIANT HEATER

TWIN EAGLES ALL WEATHER ELECTRIC RADIANT HEATER TWIN EAGLES, INC. Defining the Art of Outdoor Cooking TWIN EAGLES ALL WEATHER ELECTRIC RADIANT HEATER OWNER S MANUAL MODEL TEEH-1512 TEEH-2524 TEEH-3524 NEED ASSISTANCE? PLEASE CALL: (562) 802-3488 This

More information

INSTALLATION & MAINTENANCE MANUAL TURBOPOWER GAS, OIL & GAS/OIL WATER HEATER

INSTALLATION & MAINTENANCE MANUAL TURBOPOWER GAS, OIL & GAS/OIL WATER HEATER INSTALLATION & MAINTENANCE MANUAL TURBOPOWER GAS, OIL & GAS/OIL WATER HEATER Installation and service must be performed by a qualified service installer, service agency or the gas supplier. Oil Gas/Oil

More information

ELECTRIC RESIDENTIAL ELECTRIC WATER HEATER OWNER'S MANUAL GENERAL SAFETY INFORMATION TABLE OF CONTENTS EXTERNAL DAMAGE INSULATION BLANKETS

ELECTRIC RESIDENTIAL ELECTRIC WATER HEATER OWNER'S MANUAL GENERAL SAFETY INFORMATION TABLE OF CONTENTS EXTERNAL DAMAGE INSULATION BLANKETS RESIDENTIAL ELECTRIC WATER HEATER OWNER'S MANUAL Thank you for buying this water heater from A.O. Smith Water Products Company. We appreciate your confidence in our products. Please read through this informative

More information

INSTALLATION INSTRUCTIONS & HOME OWNERS MANUAL IMPORTANT SAFETY INFORMATION

INSTALLATION INSTRUCTIONS & HOME OWNERS MANUAL IMPORTANT SAFETY INFORMATION http://waterheatertimer.org/how-to-install-under-counter-water-heater.html INSTALLATION INSTRUCTIONS & HOME OWNERS MANUAL MODELS: ECO 16 18 21 24 27 IMPORTANT SAFETY INFORMATION As when installing or using

More information

Pre-Fab Easy Installation For Models: 006-CT-USK, 008-CT-USK Installation and Operating Instructions for Existing Homes with Standard Piping

Pre-Fab Easy Installation For Models: 006-CT-USK, 008-CT-USK Installation and Operating Instructions for Existing Homes with Standard Piping Instruction Sheet 102-140 Pre-Fab Easy Installation For Models: 006-CT-USK, 008-CT-USK Installation and Operating Instructions for Existing Homes with Standard Piping Plant I.D. 001-1024 EFFECTIVE: November

More information

3M Water Filtration Products. CFS01 Series, CFS02 Series, CFS11 Series, and CFS12 Series Housings. Installation and Instruction Manual For:

3M Water Filtration Products. CFS01 Series, CFS02 Series, CFS11 Series, and CFS12 Series Housings. Installation and Instruction Manual For: 3M Water Filtration Products Installation and Instruction Manual For: CFS01 Series, CFS02 Series, CFS11 Series, and CFS12 Series Housings Installer: Please leave this manual with owner/operator. Owner/Operator:

More information

Solar Skies Stainless Tank Series Water Heater

Solar Skies Stainless Tank Series Water Heater Solar Skies Stainless Tank Series Water Heater Installation Operation Maintenance Solar Skies Stainless Tank CD1051A.doc Last Revision: 1/31/2011 1 CONTENTS Part 1 Product and Safety Information.....................................

More information

Table of Contents WARNING SYMBOLS AND DEFINITIONS

Table of Contents WARNING SYMBOLS AND DEFINITIONS Table of Contents SAFETY INSTALLATION OPERATION MAINTENANCE Safety... 2 Specifications... 4 Installation... 5 Operation... 8 WARNING SYMBOLS AND DEFINITIONS Maintenance... 9 Parts List and Assembly Diagram...

More information

INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected)

INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected) CHRONOMITE INSTANT-FLOW WATER HEATER INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected) TABLE 1 Model No. Wattage

More information

Installation Manual DIAPHRAGM WELL TANK

Installation Manual DIAPHRAGM WELL TANK Installation Manual DIAPHRAGM WELL TANK Safety Instructions Installation Warranty IN-LINE SERIES: 2-5 & 7 GALLON HORIZONTAL SERIES: 7-14 & 20 GALLON VERTICAL SERIES: 14-20-32-36-52-86-96-119 GALLON KEEP

More information

36G22, 36G23, 36G24 & 36G52 36J22, 36J23, 36J24 & 36J52 DSI and HSI Single Stage Combination Gas Valve

36G22, 36G23, 36G24 & 36G52 36J22, 36J23, 36J24 & 36J52 DSI and HSI Single Stage Combination Gas Valve Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. DESCRIPTION

More information

with MERCURY FREE 1 HP Relays ! WARNING Before using this product read and understand instructions.

with MERCURY FREE 1 HP Relays ! WARNING Before using this product read and understand instructions. B Installation & Maintenance Instructions MM-414 Series 150E and 157E Low Water Cut-Off/Pump Controllers For Steam Boilers and Other Level Control Applications A Typical Applications: Primary or secondary

More information

Indirect Water Heaters

Indirect Water Heaters Indirect Water Heaters Installation Start-Up Maintenance Parts Warranty For Residential and Commercial Use WI Models The surfaces of these products contacted by potable (consumable) water contain less

More information

Service Guide 12/27/03 TESTING, SERVICE & REPAIR GUIDE (For SH Space Heating Models & RA Water Heating Models)

Service Guide 12/27/03 TESTING, SERVICE & REPAIR GUIDE (For SH Space Heating Models & RA Water Heating Models) TESTING, SERVICE & REPAIR GUIDE (For SH Space Heating Models & RA Water Heating Models) WARNING - HIGH VOLTAGE AC electrical circuits are connected to this heater. Do not attempt any service work on the

More information

ATS Overhead Table Shelf System INSTRUCTION MANUAL

ATS Overhead Table Shelf System INSTRUCTION MANUAL ATS Overhead Table Shelf System INSTRUCTION MANUAL ATS Overhead Table Shelf System Instruction Manual Warranty Newport Corporation warrants this product to be free of defects in material and workmanship

More information

INSTALLATION, OPERATING, AND SERVICE INSTRUCTIONS

INSTALLATION, OPERATING, AND SERVICE INSTRUCTIONS INSTALLATION, OPERATING, AND SERVICE INSTRUCTIONS HEAT-FLO INDIRECT-FIRED WATER HEATERS MODELS 30, 40, 40L, 50, 60, 60L, 80, 115 AND 60-HO, 80-HO, 80-HO-C, 115-HO, 115-HO-C 85-XHO, 115-XHO HIGH OUTPUT

More information

Installation Instructions

Installation Instructions Installation Instructions Built-In Dishwasher If you have questions, call 1-800-4-MY-HOME (1-800-469-4663) or visit our website at: www.sears.com BEFORE YOU BEGIN Read these instructions completely and

More information

MBA-MM-1040/10/13/1665 MULTI MEDIA FILTERS

MBA-MM-1040/10/13/1665 MULTI MEDIA FILTERS MASTER Water Conditioning Corp. www.masterwater.com Installation and Operation Manual MBA-MM-1040/10/13/1665 MULTI MEDIA FILTERS with the 263/742 Logix Control Valve June 2010 Table of Contents Page No.

More information

INSTALLATION AND SERVICE MANUAL EPJ SERIES INDIRECT WATER HEATERS

INSTALLATION AND SERVICE MANUAL EPJ SERIES INDIRECT WATER HEATERS INSTALLATION AND SERVICE MANUAL EPJ SERIES INDIRECT WATER HEATERS FOR MODELS EPJ-40 AND EPJ-56 SEE REAR COVER FOR INDEX Read this instruction manual before installation, operation, or service. Failure

More information

3. SEISCO PARTS & SERVICE REMOVAL AND REPAIR GUIDE

3. SEISCO PARTS & SERVICE REMOVAL AND REPAIR GUIDE 4 3. SEISCO PARTS & SERVICE REMOVAL AND REPAIR GUIDE A. Changing the Control Board B. Replacing a Heating Element C. Thermistor Replacement D. High Limit Switch Replacement E. Level Detector Replacement

More information

FLUSHMATE FLUSHMATE FLUSHOMETER - TANK SYSTEM. Owner s Service Manual 503 and 504 Series

FLUSHMATE FLUSHMATE FLUSHOMETER - TANK SYSTEM. Owner s Service Manual 503 and 504 Series Owner s Service Manual 503 and 504 Series FLUSHMATE FLUSHOMETER - TANK SYSTEM 503 504 FLUSHMATE A Division of Sloan Valve Company 30075 Research Drive New Hudson, MI 48165 800-533-3460 248-446-5300 http://www.flushmate.com

More information

Advantium 2 Plus Alarm

Advantium 2 Plus Alarm ADI 9510-B Advantium 2 Plus Alarm INSTALLATION AND OPERATING INSTRUCTIONS Carefully Read These Instructions Before Operating Carefully Read These Controls Corporation of America 1501 Harpers Road Virginia

More information